diff options
Diffstat (limited to 'arch/arm/cpu/armv7')
| -rw-r--r-- | arch/arm/cpu/armv7/am33xx/board.c | 85 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/am33xx/clock.c | 8 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/exynos/clock.c | 16 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/exynos/pinmux.c | 62 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/omap3/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/omap3/am35x_musb.c | 75 |
6 files changed, 247 insertions, 0 deletions
diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c index e4c123cd21..da5bc73185 100644 --- a/arch/arm/cpu/armv7/am33xx/board.c +++ b/arch/arm/cpu/armv7/am33xx/board.c @@ -33,6 +33,11 @@ #include <i2c.h> #include <miiphy.h> #include <cpsw.h> +#include <asm/errno.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> +#include <linux/usb/musb.h> +#include <asm/omap_musb.h> DECLARE_GLOBAL_DATA_PTR; @@ -63,3 +68,83 @@ void setup_clocks_for_console(void) /* Not yet implemented */ return; } + +/* AM33XX has two MUSB controllers which can be host or gadget */ +#if (defined(CONFIG_MUSB_GADGET) || defined(CONFIG_MUSB_HOST)) && \ + (defined(CONFIG_AM335X_USB0) || defined(CONFIG_AM335X_USB1)) +static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; + +/* USB 2.0 PHY Control */ +#define CM_PHY_PWRDN (1 << 0) +#define CM_PHY_OTG_PWRDN (1 << 1) +#define OTGVDET_EN (1 << 19) +#define OTGSESSENDEN (1 << 20) + +static void am33xx_usb_set_phy_power(u8 on, u32 *reg_addr) +{ + if (on) { + clrsetbits_le32(reg_addr, CM_PHY_PWRDN | CM_PHY_OTG_PWRDN, + OTGVDET_EN | OTGSESSENDEN); + } else { + clrsetbits_le32(reg_addr, 0, CM_PHY_PWRDN | CM_PHY_OTG_PWRDN); + } +} + +static struct musb_hdrc_config musb_config = { + .multipoint = 1, + .dyn_fifo = 1, + .num_eps = 16, + .ram_bits = 12, +}; + +#ifdef CONFIG_AM335X_USB0 +static void am33xx_otg0_set_phy_power(u8 on) +{ + am33xx_usb_set_phy_power(on, &cdev->usb_ctrl0); +} + +struct omap_musb_board_data otg0_board_data = { + .set_phy_power = am33xx_otg0_set_phy_power, +}; + +static struct musb_hdrc_platform_data otg0_plat = { + .mode = CONFIG_AM335X_USB0_MODE, + .config = &musb_config, + .power = 50, + .platform_ops = &musb_dsps_ops, + .board_data = &otg0_board_data, +}; +#endif + +#ifdef CONFIG_AM335X_USB1 +static void am33xx_otg1_set_phy_power(u8 on) +{ + am33xx_usb_set_phy_power(on, &cdev->usb_ctrl1); +} + +struct omap_musb_board_data otg1_board_data = { + .set_phy_power = am33xx_otg1_set_phy_power, +}; + +static struct musb_hdrc_platform_data otg1_plat = { + .mode = CONFIG_AM335X_USB1_MODE, + .config = &musb_config, + .power = 50, + .platform_ops = &musb_dsps_ops, + .board_data = &otg1_board_data, +}; +#endif +#endif + +int arch_misc_init(void) +{ +#ifdef CONFIG_AM335X_USB0 + musb_register(&otg0_plat, &otg0_board_data, + (void *)AM335X_USB0_OTG_BASE); +#endif +#ifdef CONFIG_AM335X_USB1 + musb_register(&otg1_plat, &otg1_board_data, + (void *)AM335X_USB1_OTG_BASE); +#endif + return 0; +} diff --git a/arch/arm/cpu/armv7/am33xx/clock.c b/arch/arm/cpu/armv7/am33xx/clock.c index bc2abb657c..0b4cb4e529 100644 --- a/arch/arm/cpu/armv7/am33xx/clock.c +++ b/arch/arm/cpu/armv7/am33xx/clock.c @@ -40,6 +40,7 @@ #define CLK_MODE_MASK 0xfffffff8 #define CLK_DIV_SEL 0xFFFFFFE0 #define CPGMAC0_IDLE 0x30000 +#define DPLL_CLKDCOLDO_GATE_CTRL 0x300 const struct cm_perpll *cmper = (struct cm_perpll *)CM_PER; const struct cm_wkuppll *cmwkup = (struct cm_wkuppll *)CM_WKUP; @@ -194,6 +195,11 @@ static void enable_per_clocks(void) writel(PRCM_MOD_EN, &cmrtc->rtcclkctrl); while (readl(&cmrtc->rtcclkctrl) != PRCM_MOD_EN) ; + + /* MUSB */ + writel(PRCM_MOD_EN, &cmper->usb0clkctrl); + while (readl(&cmper->usb0clkctrl) != PRCM_MOD_EN) + ; } static void mpu_pll_config(void) @@ -290,6 +296,8 @@ static void per_pll_config(void) while (readl(&cmwkup->idlestdpllper) != ST_DPLL_CLK) ; + + writel(DPLL_CLKDCOLDO_GATE_CTRL, &cmwkup->clkdcoldodpllper); } void ddr_pll_config(unsigned int ddrpll_m) diff --git a/arch/arm/cpu/armv7/exynos/clock.c b/arch/arm/cpu/armv7/exynos/clock.c index fe61f88af4..c6c66814e5 100644 --- a/arch/arm/cpu/armv7/exynos/clock.c +++ b/arch/arm/cpu/armv7/exynos/clock.c @@ -919,6 +919,20 @@ static int exynos5_set_spi_clk(enum periph_id periph_id, clrsetbits_le32(reg, mask << pre_shift, (fine & mask) << pre_shift); return 0; + +static unsigned long exynos4_get_i2c_clk(void) +{ + struct exynos4_clock *clk = + (struct exynos4_clock *)samsung_get_base_clock(); + unsigned long sclk, aclk_100; + unsigned int ratio; + + sclk = get_pll_clk(APLL); + + ratio = (readl(&clk->div_top)) >> 4; + ratio &= 0xf; + aclk_100 = sclk / (ratio + 1); + return aclk_100; } unsigned long get_pll_clk(int pllreg) @@ -941,6 +955,8 @@ unsigned long get_i2c_clk(void) { if (cpu_is_exynos5()) { return exynos5_get_i2c_clk(); + } else if (cpu_is_exynos4()) { + return exynos4_get_i2c_clk(); } else { debug("I2C clock is not set for this CPU\n"); return 0; diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c index f02f441a8b..b479965743 100644 --- a/arch/arm/cpu/armv7/exynos/pinmux.c +++ b/arch/arm/cpu/armv7/exynos/pinmux.c @@ -385,6 +385,68 @@ static int exynos4_pinmux_config(int peripheral, int flags) return 0; } +static void exynos4_i2c_config(int peripheral, int flags) +{ + struct exynos4_gpio_part1 *gpio1 = + (struct exynos4_gpio_part1 *) samsung_get_base_gpio_part1(); + + switch (peripheral) { + case PERIPH_ID_I2C0: + s5p_gpio_cfg_pin(&gpio1->d1, 0, GPIO_FUNC(0x2)); + s5p_gpio_cfg_pin(&gpio1->d1, 1, GPIO_FUNC(0x2)); + break; + case PERIPH_ID_I2C1: + s5p_gpio_cfg_pin(&gpio1->d1, 2, GPIO_FUNC(0x2)); + s5p_gpio_cfg_pin(&gpio1->d1, 3, GPIO_FUNC(0x2)); + break; + case PERIPH_ID_I2C2: + s5p_gpio_cfg_pin(&gpio1->a0, 6, GPIO_FUNC(0x3)); + s5p_gpio_cfg_pin(&gpio1->a0, 7, GPIO_FUNC(0x3)); + break; + case PERIPH_ID_I2C3: + s5p_gpio_cfg_pin(&gpio1->a1, 2, GPIO_FUNC(0x3)); + s5p_gpio_cfg_pin(&gpio1->a1, 3, GPIO_FUNC(0x3)); + break; + case PERIPH_ID_I2C4: + s5p_gpio_cfg_pin(&gpio1->b, 2, GPIO_FUNC(0x3)); + s5p_gpio_cfg_pin(&gpio1->b, 3, GPIO_FUNC(0x3)); + break; + case PERIPH_ID_I2C5: + s5p_gpio_cfg_pin(&gpio1->b, 6, GPIO_FUNC(0x3)); + s5p_gpio_cfg_pin(&gpio1->b, 7, GPIO_FUNC(0x3)); + break; + case PERIPH_ID_I2C6: + s5p_gpio_cfg_pin(&gpio1->c1, 3, GPIO_FUNC(0x4)); + s5p_gpio_cfg_pin(&gpio1->c1, 4, GPIO_FUNC(0x4)); + break; + case PERIPH_ID_I2C7: + s5p_gpio_cfg_pin(&gpio1->d0, 2, GPIO_FUNC(0x3)); + s5p_gpio_cfg_pin(&gpio1->d0, 3, GPIO_FUNC(0x3)); + break; + } +} + +static int exynos4_pinmux_config(int peripheral, int flags) +{ + switch (peripheral) { + case PERIPH_ID_I2C0: + case PERIPH_ID_I2C1: + case PERIPH_ID_I2C2: + case PERIPH_ID_I2C3: + case PERIPH_ID_I2C4: + case PERIPH_ID_I2C5: + case PERIPH_ID_I2C6: + case PERIPH_ID_I2C7: + exynos4_i2c_config(peripheral, flags); + break; + default: + debug("%s: invalid peripheral %d", __func__, peripheral); + return -1; + } + + return 0; +} + int exynos_pinmux_config(int peripheral, int flags) { if (cpu_is_exynos5()) diff --git a/arch/arm/cpu/armv7/omap3/Makefile b/arch/arm/cpu/armv7/omap3/Makefile index ac597be25a..de167eea56 100644 --- a/arch/arm/cpu/armv7/omap3/Makefile +++ b/arch/arm/cpu/armv7/omap3/Makefile @@ -38,6 +38,7 @@ endif COBJS-$(CONFIG_DRIVER_TI_EMAC) += emac.o COBJS-$(CONFIG_EMIF4) += emif4.o COBJS-$(CONFIG_SDRC) += sdrc.o +COBJS-$(CONFIG_USB_MUSB_AM35X) += am35x_musb.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS) $(COBJS-y) $(SOBJS)) diff --git a/arch/arm/cpu/armv7/omap3/am35x_musb.c b/arch/arm/cpu/armv7/omap3/am35x_musb.c new file mode 100644 index 0000000000..7183c4f248 --- /dev/null +++ b/arch/arm/cpu/armv7/omap3/am35x_musb.c @@ -0,0 +1,75 @@ +/* + * This file configures the internal USB PHY in AM35X. + * + * Copyright (C) 2012 Ilya Yanok <ilya.yanok@gmail.com> + * + * Based on omap_phy_internal.c code from Linux by + * Hema HK <hemahk@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + * + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/am35x_def.h> + +void am35x_musb_reset(void) +{ + /* Reset the musb interface */ + clrsetbits_le32(&am35x_scm_general_regs->ip_sw_reset, + 0, USBOTGSS_SW_RST); + clrsetbits_le32(&am35x_scm_general_regs->ip_sw_reset, + USBOTGSS_SW_RST, 0); +} + +void am35x_musb_phy_power(u8 on) +{ + unsigned long start = get_timer(0); + + if (on) { + /* + * Start the on-chip PHY and its PLL. + */ + clrsetbits_le32(&am35x_scm_general_regs->devconf2, + CONF2_RESET | CONF2_PHYPWRDN | CONF2_OTGPWRDN, + CONF2_PHY_PLLON); + + debug("Waiting for PHY clock good...\n"); + while (!(readl(&am35x_scm_general_regs->devconf2) + & CONF2_PHYCLKGD)) { + + if (get_timer(start) > CONFIG_SYS_HZ / 10) { + printf("musb PHY clock good timed out\n"); + break; + } + } + } else { + /* + * Power down the on-chip PHY. + */ + clrsetbits_le32(&am35x_scm_general_regs->devconf2, + CONF2_PHY_PLLON, + CONF2_PHYPWRDN | CONF2_OTGPWRDN); + } +} + +void am35x_musb_clear_irq(void) +{ + clrsetbits_le32(&am35x_scm_general_regs->lvl_intr_clr, + 0, USBOTGSS_INT_CLR); + readl(&am35x_scm_general_regs->lvl_intr_clr); +} + |
