diff options
Diffstat (limited to 'arch/arm/cpu/armv7')
| -rw-r--r-- | arch/arm/cpu/armv7/mx6/Kconfig | 2 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/mx6/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/mx6/clock.c | 245 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/mx6/hab.c | 502 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/mx6/soc.c | 15 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/mx7/Kconfig | 2 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/mx7/Makefile | 4 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/mx7/psci-mx7.c | 69 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/mx7/psci.S | 54 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/mx7/soc.c | 17 |
10 files changed, 408 insertions, 503 deletions
diff --git a/arch/arm/cpu/armv7/mx6/Kconfig b/arch/arm/cpu/armv7/mx6/Kconfig index 0b02e9e778..273e209cbb 100644 --- a/arch/arm/cpu/armv7/mx6/Kconfig +++ b/arch/arm/cpu/armv7/mx6/Kconfig @@ -23,10 +23,12 @@ config MX6SL bool config MX6SX + select ROM_UNIFIED_SECTIONS bool config MX6UL select SYS_L2CACHE_OFF + select ROM_UNIFIED_SECTIONS bool choice diff --git a/arch/arm/cpu/armv7/mx6/Makefile b/arch/arm/cpu/armv7/mx6/Makefile index bf6effc939..8af191d660 100644 --- a/arch/arm/cpu/armv7/mx6/Makefile +++ b/arch/arm/cpu/armv7/mx6/Makefile @@ -9,5 +9,4 @@ obj-y := soc.o clock.o obj-$(CONFIG_SPL_BUILD) += ddr.o -obj-$(CONFIG_SECURE_BOOT) += hab.o obj-$(CONFIG_MP) += mp.o diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c index 11efd12c9a..67e0f3252f 100644 --- a/arch/arm/cpu/armv7/mx6/clock.c +++ b/arch/arm/cpu/armv7/mx6/clock.c @@ -473,6 +473,251 @@ static u32 get_mmdc_ch0_clk(void) } } +#if defined(CONFIG_VIDEO_MXS) +static int enable_pll_video(u32 pll_div, u32 pll_num, u32 pll_denom, + u32 post_div) +{ + u32 reg = 0; + ulong start; + + debug("pll5 div = %d, num = %d, denom = %d\n", + pll_div, pll_num, pll_denom); + + /* Power up PLL5 video */ + writel(BM_ANADIG_PLL_VIDEO_POWERDOWN | + BM_ANADIG_PLL_VIDEO_BYPASS | + BM_ANADIG_PLL_VIDEO_DIV_SELECT | + BM_ANADIG_PLL_VIDEO_POST_DIV_SELECT, + &imx_ccm->analog_pll_video_clr); + + /* Set div, num and denom */ + switch (post_div) { + case 1: + writel(BF_ANADIG_PLL_VIDEO_DIV_SELECT(pll_div) | + BF_ANADIG_PLL_VIDEO_POST_DIV_SELECT(0x2), + &imx_ccm->analog_pll_video_set); + break; + case 2: + writel(BF_ANADIG_PLL_VIDEO_DIV_SELECT(pll_div) | + BF_ANADIG_PLL_VIDEO_POST_DIV_SELECT(0x1), + &imx_ccm->analog_pll_video_set); + break; + case 4: + writel(BF_ANADIG_PLL_VIDEO_DIV_SELECT(pll_div) | + BF_ANADIG_PLL_VIDEO_POST_DIV_SELECT(0x0), + &imx_ccm->analog_pll_video_set); + break; + default: + puts("Wrong test_div!\n"); + return -EINVAL; + } + + writel(BF_ANADIG_PLL_VIDEO_NUM_A(pll_num), + &imx_ccm->analog_pll_video_num); + writel(BF_ANADIG_PLL_VIDEO_DENOM_B(pll_denom), + &imx_ccm->analog_pll_video_denom); + + /* Wait PLL5 lock */ + start = get_timer(0); /* Get current timestamp */ + + do { + reg = readl(&imx_ccm->analog_pll_video); + if (reg & BM_ANADIG_PLL_VIDEO_LOCK) { + /* Enable PLL out */ + writel(BM_ANADIG_PLL_VIDEO_ENABLE, + &imx_ccm->analog_pll_video_set); + return 0; + } + } while (get_timer(0) < (start + 10)); /* Wait 10ms */ + + puts("Lock PLL5 timeout\n"); + + return -ETIME; +} + +/* + * 24M--> PLL_VIDEO -> LCDIFx_PRED -> LCDIFx_PODF -> LCD + * + * 'freq' using KHz as unit, see driver/video/mxsfb.c. + */ +void mxs_set_lcdclk(u32 base_addr, u32 freq) +{ + u32 reg = 0; + u32 hck = MXC_HCLK / 1000; + /* DIV_SELECT ranges from 27 to 54 */ + u32 min = hck * 27; + u32 max = hck * 54; + u32 temp, best = 0; + u32 i, j, max_pred = 8, max_postd = 8, pred = 1, postd = 1; + u32 pll_div, pll_num, pll_denom, post_div = 1; + + debug("mxs_set_lcdclk, freq = %dKHz\n", freq); + + if ((!is_cpu_type(MXC_CPU_MX6SX)) && !is_cpu_type(MXC_CPU_MX6UL)) { + debug("This chip not support lcd!\n"); + return; + } + + if (base_addr == LCDIF1_BASE_ADDR) { + reg = readl(&imx_ccm->cscdr2); + /* Can't change clocks when clock not from pre-mux */ + if ((reg & MXC_CCM_CSCDR2_LCDIF1_CLK_SEL_MASK) != 0) + return; + } + + if (is_cpu_type(MXC_CPU_MX6SX)) { + reg = readl(&imx_ccm->cscdr2); + /* Can't change clocks when clock not from pre-mux */ + if ((reg & MXC_CCM_CSCDR2_LCDIF2_CLK_SEL_MASK) != 0) + return; + } + + temp = freq * max_pred * max_postd; + if (temp > max) { + puts("Please decrease freq, too large!\n"); + return; + } + if (temp < min) { + /* + * Register: PLL_VIDEO + * Bit Field: POST_DIV_SELECT + * 00 — Divide by 4. + * 01 — Divide by 2. + * 10 — Divide by 1. + * 11 — Reserved + * No need to check post_div(1) + */ + for (post_div = 2; post_div <= 4; post_div <<= 1) { + if ((temp * post_div) > min) { + freq *= post_div; + break; + } + } + + if (post_div > 4) { + printf("Fail to set rate to %dkhz", freq); + return; + } + } + + /* Choose the best pred and postd to match freq for lcd */ + for (i = 1; i <= max_pred; i++) { + for (j = 1; j <= max_postd; j++) { + temp = freq * i * j; + if (temp > max || temp < min) + continue; + if (best == 0 || temp < best) { + best = temp; + pred = i; + postd = j; + } + } + } + + if (best == 0) { + printf("Fail to set rate to %dKHz", freq); + return; + } + + debug("best %d, pred = %d, postd = %d\n", best, pred, postd); + + pll_div = best / hck; + pll_denom = 1000000; + pll_num = (best - hck * pll_div) * pll_denom / hck; + + /* + * pll_num + * (24MHz * (pll_div + --------- )) + * pll_denom + *freq KHz = -------------------------------- + * post_div * pred * postd * 1000 + */ + + if (base_addr == LCDIF1_BASE_ADDR) { + if (enable_pll_video(pll_div, pll_num, pll_denom, post_div)) + return; + + /* Select pre-lcd clock to PLL5 and set pre divider */ + clrsetbits_le32(&imx_ccm->cscdr2, + MXC_CCM_CSCDR2_LCDIF1_PRED_SEL_MASK | + MXC_CCM_CSCDR2_LCDIF1_PRE_DIV_MASK, + (0x2 << MXC_CCM_CSCDR2_LCDIF1_PRED_SEL_OFFSET) | + ((pred - 1) << + MXC_CCM_CSCDR2_LCDIF1_PRE_DIV_OFFSET)); + + /* Set the post divider */ + clrsetbits_le32(&imx_ccm->cbcmr, + MXC_CCM_CBCMR_LCDIF1_PODF_MASK, + ((postd - 1) << + MXC_CCM_CBCMR_LCDIF1_PODF_OFFSET)); + } else if (is_cpu_type(MXC_CPU_MX6SX)) { + /* Setting LCDIF2 for i.MX6SX */ + if (enable_pll_video(pll_div, pll_num, pll_denom, post_div)) + return; + + /* Select pre-lcd clock to PLL5 and set pre divider */ + clrsetbits_le32(&imx_ccm->cscdr2, + MXC_CCM_CSCDR2_LCDIF2_PRED_SEL_MASK | + MXC_CCM_CSCDR2_LCDIF2_PRE_DIV_MASK, + (0x2 << MXC_CCM_CSCDR2_LCDIF2_PRED_SEL_OFFSET) | + ((pred - 1) << + MXC_CCM_CSCDR2_LCDIF2_PRE_DIV_OFFSET)); + + /* Set the post divider */ + clrsetbits_le32(&imx_ccm->cscmr1, + MXC_CCM_CSCMR1_LCDIF2_PODF_MASK, + ((postd - 1) << + MXC_CCM_CSCMR1_LCDIF2_PODF_OFFSET)); + } +} + +int enable_lcdif_clock(u32 base_addr) +{ + u32 reg = 0; + u32 lcdif_clk_sel_mask, lcdif_ccgr3_mask; + + if (is_cpu_type(MXC_CPU_MX6SX)) { + if ((base_addr == LCDIF1_BASE_ADDR) || + (base_addr == LCDIF2_BASE_ADDR)) { + puts("Wrong LCD interface!\n"); + return -EINVAL; + } + /* Set to pre-mux clock at default */ + lcdif_clk_sel_mask = (base_addr == LCDIF2_BASE_ADDR) ? + MXC_CCM_CSCDR2_LCDIF2_CLK_SEL_MASK : + MXC_CCM_CSCDR2_LCDIF1_CLK_SEL_MASK; + lcdif_ccgr3_mask = (base_addr == LCDIF2_BASE_ADDR) ? + (MXC_CCM_CCGR3_LCDIF2_PIX_MASK | + MXC_CCM_CCGR3_DISP_AXI_MASK) : + (MXC_CCM_CCGR3_LCDIF1_PIX_MASK | + MXC_CCM_CCGR3_DISP_AXI_MASK); + } else if (is_cpu_type(MXC_CPU_MX6UL)) { + if (base_addr != LCDIF1_BASE_ADDR) { + puts("Wrong LCD interface!\n"); + return -EINVAL; + } + /* Set to pre-mux clock at default */ + lcdif_clk_sel_mask = MXC_CCM_CSCDR2_LCDIF1_CLK_SEL_MASK; + lcdif_ccgr3_mask = MXC_CCM_CCGR3_LCDIF1_PIX_MASK; + } else { + return 0; + } + + reg = readl(&imx_ccm->cscdr2); + reg &= ~lcdif_clk_sel_mask; + writel(reg, &imx_ccm->cscdr2); + + /* Enable the LCDIF pix clock */ + reg = readl(&imx_ccm->CCGR3); + reg |= lcdif_ccgr3_mask; + writel(reg, &imx_ccm->CCGR3); + + reg = readl(&imx_ccm->CCGR2); + reg |= MXC_CCM_CCGR2_LCD_MASK; + writel(reg, &imx_ccm->CCGR2); +} +#endif + #ifdef CONFIG_FSL_QSPI /* qspi_num can be from 0 - 1 */ void enable_qspi_clk(int qspi_num) diff --git a/arch/arm/cpu/armv7/mx6/hab.c b/arch/arm/cpu/armv7/mx6/hab.c deleted file mode 100644 index 27cabe477d..0000000000 --- a/arch/arm/cpu/armv7/mx6/hab.c +++ /dev/null @@ -1,502 +0,0 @@ -/* - * Copyright (C) 2010-2015 Freescale Semiconductor, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/system.h> -#include <asm/arch/hab.h> -#include <asm/arch/clock.h> -#include <asm/arch/sys_proto.h> - -/* -------- start of HAB API updates ------------*/ - -#define hab_rvt_report_event_p \ -( \ - ((is_cpu_type(MXC_CPU_MX6Q) || \ - is_cpu_type(MXC_CPU_MX6D)) && \ - (soc_rev() >= CHIP_REV_1_5)) ? \ - ((hab_rvt_report_event_t *)HAB_RVT_REPORT_EVENT_NEW) : \ - (is_cpu_type(MXC_CPU_MX6DL) && \ - (soc_rev() >= CHIP_REV_1_2)) ? \ - ((hab_rvt_report_event_t *)HAB_RVT_REPORT_EVENT_NEW) : \ - ((hab_rvt_report_event_t *)HAB_RVT_REPORT_EVENT) \ -) - -#define hab_rvt_report_status_p \ -( \ - ((is_cpu_type(MXC_CPU_MX6Q) || \ - is_cpu_type(MXC_CPU_MX6D)) && \ - (soc_rev() >= CHIP_REV_1_5)) ? \ - ((hab_rvt_report_status_t *)HAB_RVT_REPORT_STATUS_NEW) :\ - (is_cpu_type(MXC_CPU_MX6DL) && \ - (soc_rev() >= CHIP_REV_1_2)) ? \ - ((hab_rvt_report_status_t *)HAB_RVT_REPORT_STATUS_NEW) :\ - ((hab_rvt_report_status_t *)HAB_RVT_REPORT_STATUS) \ -) - -#define hab_rvt_authenticate_image_p \ -( \ - ((is_cpu_type(MXC_CPU_MX6Q) || \ - is_cpu_type(MXC_CPU_MX6D)) && \ - (soc_rev() >= CHIP_REV_1_5)) ? \ - ((hab_rvt_authenticate_image_t *)HAB_RVT_AUTHENTICATE_IMAGE_NEW) : \ - (is_cpu_type(MXC_CPU_MX6DL) && \ - (soc_rev() >= CHIP_REV_1_2)) ? \ - ((hab_rvt_authenticate_image_t *)HAB_RVT_AUTHENTICATE_IMAGE_NEW) : \ - ((hab_rvt_authenticate_image_t *)HAB_RVT_AUTHENTICATE_IMAGE) \ -) - -#define hab_rvt_entry_p \ -( \ - ((is_cpu_type(MXC_CPU_MX6Q) || \ - is_cpu_type(MXC_CPU_MX6D)) && \ - (soc_rev() >= CHIP_REV_1_5)) ? \ - ((hab_rvt_entry_t *)HAB_RVT_ENTRY_NEW) : \ - (is_cpu_type(MXC_CPU_MX6DL) && \ - (soc_rev() >= CHIP_REV_1_2)) ? \ - ((hab_rvt_entry_t *)HAB_RVT_ENTRY_NEW) : \ - ((hab_rvt_entry_t *)HAB_RVT_ENTRY) \ -) - -#define hab_rvt_exit_p \ -( \ - ((is_cpu_type(MXC_CPU_MX6Q) || \ - is_cpu_type(MXC_CPU_MX6D)) && \ - (soc_rev() >= CHIP_REV_1_5)) ? \ - ((hab_rvt_exit_t *)HAB_RVT_EXIT_NEW) : \ - (is_cpu_type(MXC_CPU_MX6DL) && \ - (soc_rev() >= CHIP_REV_1_2)) ? \ - ((hab_rvt_exit_t *)HAB_RVT_EXIT_NEW) : \ - ((hab_rvt_exit_t *)HAB_RVT_EXIT) \ -) - -#define IVT_SIZE 0x20 -#define ALIGN_SIZE 0x1000 -#define CSF_PAD_SIZE 0x2000 -#define MX6DQ_PU_IROM_MMU_EN_VAR 0x009024a8 -#define MX6DLS_PU_IROM_MMU_EN_VAR 0x00901dd0 -#define MX6SL_PU_IROM_MMU_EN_VAR 0x00900a18 - -/* - * +------------+ 0x0 (DDR_UIMAGE_START) - - * | Header | | - * +------------+ 0x40 | - * | | | - * | | | - * | | | - * | | | - * | Image Data | | - * . | | - * . | > Stuff to be authenticated ----+ - * . | | | - * | | | | - * | | | | - * +------------+ | | - * | | | | - * | Fill Data | | | - * | | | | - * +------------+ Align to ALIGN_SIZE | | - * | IVT | | | - * +------------+ + IVT_SIZE - | - * | | | - * | CSF DATA | <---------------------------------------------------------+ - * | | - * +------------+ - * | | - * | Fill Data | - * | | - * +------------+ + CSF_PAD_SIZE - */ - -#define MAX_RECORD_BYTES (8*1024) /* 4 kbytes */ - -struct record { - uint8_t tag; /* Tag */ - uint8_t len[2]; /* Length */ - uint8_t par; /* Version */ - uint8_t contents[MAX_RECORD_BYTES];/* Record Data */ - bool any_rec_flag; -}; - -char *rsn_str[] = {"RSN = HAB_RSN_ANY (0x00)\n", - "RSN = HAB_ENG_FAIL (0x30)\n", - "RSN = HAB_INV_ADDRESS (0x22)\n", - "RSN = HAB_INV_ASSERTION (0x0C)\n", - "RSN = HAB_INV_CALL (0x28)\n", - "RSN = HAB_INV_CERTIFICATE (0x21)\n", - "RSN = HAB_INV_COMMAND (0x06)\n", - "RSN = HAB_INV_CSF (0x11)\n", - "RSN = HAB_INV_DCD (0x27)\n", - "RSN = HAB_INV_INDEX (0x0F)\n", - "RSN = HAB_INV_IVT (0x05)\n", - "RSN = HAB_INV_KEY (0x1D)\n", - "RSN = HAB_INV_RETURN (0x1E)\n", - "RSN = HAB_INV_SIGNATURE (0x18)\n", - "RSN = HAB_INV_SIZE (0x17)\n", - "RSN = HAB_MEM_FAIL (0x2E)\n", - "RSN = HAB_OVR_COUNT (0x2B)\n", - "RSN = HAB_OVR_STORAGE (0x2D)\n", - "RSN = HAB_UNS_ALGORITHM (0x12)\n", - "RSN = HAB_UNS_COMMAND (0x03)\n", - "RSN = HAB_UNS_ENGINE (0x0A)\n", - "RSN = HAB_UNS_ITEM (0x24)\n", - "RSN = HAB_UNS_KEY (0x1B)\n", - "RSN = HAB_UNS_PROTOCOL (0x14)\n", - "RSN = HAB_UNS_STATE (0x09)\n", - "RSN = INVALID\n", - NULL}; - -char *sts_str[] = {"STS = HAB_SUCCESS (0xF0)\n", - "STS = HAB_FAILURE (0x33)\n", - "STS = HAB_WARNING (0x69)\n", - "STS = INVALID\n", - NULL}; - -char *eng_str[] = {"ENG = HAB_ENG_ANY (0x00)\n", - "ENG = HAB_ENG_SCC (0x03)\n", - "ENG = HAB_ENG_RTIC (0x05)\n", - "ENG = HAB_ENG_SAHARA (0x06)\n", - "ENG = HAB_ENG_CSU (0x0A)\n", - "ENG = HAB_ENG_SRTC (0x0C)\n", - "ENG = HAB_ENG_DCP (0x1B)\n", - "ENG = HAB_ENG_CAAM (0x1D)\n", - "ENG = HAB_ENG_SNVS (0x1E)\n", - "ENG = HAB_ENG_OCOTP (0x21)\n", - "ENG = HAB_ENG_DTCP (0x22)\n", - "ENG = HAB_ENG_ROM (0x36)\n", - "ENG = HAB_ENG_HDCP (0x24)\n", - "ENG = HAB_ENG_RTL (0x77)\n", - "ENG = HAB_ENG_SW (0xFF)\n", - "ENG = INVALID\n", - NULL}; - -char *ctx_str[] = {"CTX = HAB_CTX_ANY(0x00)\n", - "CTX = HAB_CTX_FAB (0xFF)\n", - "CTX = HAB_CTX_ENTRY (0xE1)\n", - "CTX = HAB_CTX_TARGET (0x33)\n", - "CTX = HAB_CTX_AUTHENTICATE (0x0A)\n", - "CTX = HAB_CTX_DCD (0xDD)\n", - "CTX = HAB_CTX_CSF (0xCF)\n", - "CTX = HAB_CTX_COMMAND (0xC0)\n", - "CTX = HAB_CTX_AUT_DAT (0xDB)\n", - "CTX = HAB_CTX_ASSERT (0xA0)\n", - "CTX = HAB_CTX_EXIT (0xEE)\n", - "CTX = INVALID\n", - NULL}; - -uint8_t hab_statuses[5] = { - HAB_STS_ANY, - HAB_FAILURE, - HAB_WARNING, - HAB_SUCCESS, - -1 -}; - -uint8_t hab_reasons[26] = { - HAB_RSN_ANY, - HAB_ENG_FAIL, - HAB_INV_ADDRESS, - HAB_INV_ASSERTION, - HAB_INV_CALL, - HAB_INV_CERTIFICATE, - HAB_INV_COMMAND, - HAB_INV_CSF, - HAB_INV_DCD, - HAB_INV_INDEX, - HAB_INV_IVT, - HAB_INV_KEY, - HAB_INV_RETURN, - HAB_INV_SIGNATURE, - HAB_INV_SIZE, - HAB_MEM_FAIL, - HAB_OVR_COUNT, - HAB_OVR_STORAGE, - HAB_UNS_ALGORITHM, - HAB_UNS_COMMAND, - HAB_UNS_ENGINE, - HAB_UNS_ITEM, - HAB_UNS_KEY, - HAB_UNS_PROTOCOL, - HAB_UNS_STATE, - -1 -}; - -uint8_t hab_contexts[12] = { - HAB_CTX_ANY, - HAB_CTX_FAB, - HAB_CTX_ENTRY, - HAB_CTX_TARGET, - HAB_CTX_AUTHENTICATE, - HAB_CTX_DCD, - HAB_CTX_CSF, - HAB_CTX_COMMAND, - HAB_CTX_AUT_DAT, - HAB_CTX_ASSERT, - HAB_CTX_EXIT, - -1 -}; - -uint8_t hab_engines[16] = { - HAB_ENG_ANY, - HAB_ENG_SCC, - HAB_ENG_RTIC, - HAB_ENG_SAHARA, - HAB_ENG_CSU, - HAB_ENG_SRTC, - HAB_ENG_DCP, - HAB_ENG_CAAM, - HAB_ENG_SNVS, - HAB_ENG_OCOTP, - HAB_ENG_DTCP, - HAB_ENG_ROM, - HAB_ENG_HDCP, - HAB_ENG_RTL, - HAB_ENG_SW, - -1 -}; - -bool is_hab_enabled(void) -{ - struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR; - struct fuse_bank *bank = &ocotp->bank[0]; - struct fuse_bank0_regs *fuse = - (struct fuse_bank0_regs *)bank->fuse_regs; - uint32_t reg = readl(&fuse->cfg5); - - return (reg & 0x2) == 0x2; -} - -static inline uint8_t get_idx(uint8_t *list, uint8_t tgt) -{ - uint8_t idx = 0; - uint8_t element = list[idx]; - while (element != -1) { - if (element == tgt) - return idx; - element = list[++idx]; - } - return -1; -} - -void process_event_record(uint8_t *event_data, size_t bytes) -{ - struct record *rec = (struct record *)event_data; - - printf("\n\n%s", sts_str[get_idx(hab_statuses, rec->contents[0])]); - printf("%s", rsn_str[get_idx(hab_reasons, rec->contents[1])]); - printf("%s", ctx_str[get_idx(hab_contexts, rec->contents[2])]); - printf("%s", eng_str[get_idx(hab_engines, rec->contents[3])]); -} - -void display_event(uint8_t *event_data, size_t bytes) -{ - uint32_t i; - - if (!(event_data && bytes > 0)) - return; - - for (i = 0; i < bytes; i++) { - if (i == 0) - printf("\t0x%02x", event_data[i]); - else if ((i % 8) == 0) - printf("\n\t0x%02x", event_data[i]); - else - printf(" 0x%02x", event_data[i]); - } - - process_event_record(event_data, bytes); -} - -int get_hab_status(void) -{ - uint32_t index = 0; /* Loop index */ - uint8_t event_data[128]; /* Event data buffer */ - size_t bytes = sizeof(event_data); /* Event size in bytes */ - enum hab_config config = 0; - enum hab_state state = 0; - hab_rvt_report_event_t *hab_rvt_report_event; - hab_rvt_report_status_t *hab_rvt_report_status; - - hab_rvt_report_event = hab_rvt_report_event_p; - hab_rvt_report_status = hab_rvt_report_status_p; - - if (is_hab_enabled()) - puts("\nSecure boot enabled\n"); - else - puts("\nSecure boot disabled\n"); - - /* Check HAB status */ - if (hab_rvt_report_status(&config, &state) != HAB_SUCCESS) { - printf("\nHAB Configuration: 0x%02x, HAB State: 0x%02x\n", - config, state); - - /* Display HAB Error events */ - while (hab_rvt_report_event(HAB_FAILURE, index, event_data, - &bytes) == HAB_SUCCESS) { - puts("\n"); - printf("--------- HAB Event %d -----------------\n", - index + 1); - puts("event data:\n"); - display_event(event_data, bytes); - puts("\n"); - bytes = sizeof(event_data); - index++; - } - } - /* Display message if no HAB events are found */ - else { - printf("\nHAB Configuration: 0x%02x, HAB State: 0x%02x\n", - config, state); - puts("No HAB Events Found!\n\n"); - } - return 0; -} - -uint32_t authenticate_image(uint32_t ddr_start, uint32_t image_size) -{ - uint32_t load_addr = 0; - size_t bytes; - ptrdiff_t ivt_offset = 0; - int result = 0; - ulong start; - hab_rvt_authenticate_image_t *hab_rvt_authenticate_image; - hab_rvt_entry_t *hab_rvt_entry; - hab_rvt_exit_t *hab_rvt_exit; - - hab_rvt_authenticate_image = hab_rvt_authenticate_image_p; - hab_rvt_entry = hab_rvt_entry_p; - hab_rvt_exit = hab_rvt_exit_p; - - if (is_hab_enabled()) { - printf("\nAuthenticate image from DDR location 0x%x...\n", - ddr_start); - - hab_caam_clock_enable(1); - - if (hab_rvt_entry() == HAB_SUCCESS) { - /* If not already aligned, Align to ALIGN_SIZE */ - ivt_offset = (image_size + ALIGN_SIZE - 1) & - ~(ALIGN_SIZE - 1); - - start = ddr_start; - bytes = ivt_offset + IVT_SIZE + CSF_PAD_SIZE; -#ifdef DEBUG - printf("\nivt_offset = 0x%x, ivt addr = 0x%x\n", - ivt_offset, ddr_start + ivt_offset); - puts("Dumping IVT\n"); - print_buffer(ddr_start + ivt_offset, - (void *)(ddr_start + ivt_offset), - 4, 0x8, 0); - - puts("Dumping CSF Header\n"); - print_buffer(ddr_start + ivt_offset+IVT_SIZE, - (void *)(ddr_start + ivt_offset+IVT_SIZE), - 4, 0x10, 0); - - get_hab_status(); - - puts("\nCalling authenticate_image in ROM\n"); - printf("\tivt_offset = 0x%x\n", ivt_offset); - printf("\tstart = 0x%08lx\n", start); - printf("\tbytes = 0x%x\n", bytes); -#endif - /* - * If the MMU is enabled, we have to notify the ROM - * code, or it won't flush the caches when needed. - * This is done, by setting the "pu_irom_mmu_enabled" - * word to 1. You can find its address by looking in - * the ROM map. This is critical for - * authenticate_image(). If MMU is enabled, without - * setting this bit, authentication will fail and may - * crash. - */ - /* Check MMU enabled */ - if (get_cr() & CR_M) { - if (is_cpu_type(MXC_CPU_MX6Q) || - is_cpu_type(MXC_CPU_MX6D)) { - /* - * This won't work on Rev 1.0.0 of - * i.MX6Q/D, since their ROM doesn't - * do cache flushes. don't think any - * exist, so we ignore them. - */ - if (!is_mx6dqp()) - writel(1, MX6DQ_PU_IROM_MMU_EN_VAR); - } else if (is_cpu_type(MXC_CPU_MX6DL) || - is_cpu_type(MXC_CPU_MX6SOLO)) { - writel(1, MX6DLS_PU_IROM_MMU_EN_VAR); - } else if (is_cpu_type(MXC_CPU_MX6SL)) { - writel(1, MX6SL_PU_IROM_MMU_EN_VAR); - } - } - - load_addr = (uint32_t)hab_rvt_authenticate_image( - HAB_CID_UBOOT, - ivt_offset, (void **)&start, - (size_t *)&bytes, NULL); - if (hab_rvt_exit() != HAB_SUCCESS) { - puts("hab exit function fail\n"); - load_addr = 0; - } - } else { - puts("hab entry function fail\n"); - } - - hab_caam_clock_enable(0); - - get_hab_status(); - } else { - puts("hab fuse not enabled\n"); - } - - if ((!is_hab_enabled()) || (load_addr != 0)) - result = 1; - - return result; -} - -int do_hab_status(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - if ((argc != 1)) { - cmd_usage(cmdtp); - return 1; - } - - get_hab_status(); - - return 0; -} - -static int do_authenticate_image(cmd_tbl_t *cmdtp, int flag, int argc, - char * const argv[]) -{ - ulong addr, ivt_offset; - int rcode = 0; - - if (argc < 3) - return CMD_RET_USAGE; - - addr = simple_strtoul(argv[1], NULL, 16); - ivt_offset = simple_strtoul(argv[2], NULL, 16); - - rcode = authenticate_image(addr, ivt_offset); - - return rcode; -} - -U_BOOT_CMD( - hab_status, CONFIG_SYS_MAXARGS, 1, do_hab_status, - "display HAB status", - "" - ); - -U_BOOT_CMD( - hab_auth_img, 3, 0, do_authenticate_image, - "authenticate image via HAB", - "addr ivt_offset\n" - "addr - image hex address\n" - "ivt_offset - hex offset of IVT in the image" - ); diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index 282302b1fc..bf5ae8cdff 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -15,6 +15,7 @@ #include <asm/arch/sys_proto.h> #include <asm/imx-common/boot_mode.h> #include <asm/imx-common/dma.h> +#include <asm/imx-common/hab.h> #include <stdbool.h> #include <asm/arch/mxc_hdmi.h> #include <asm/arch/crm_regs.h> @@ -48,6 +49,13 @@ U_BOOT_DEVICE(imx6_thermal) = { }; #endif +#if defined(CONFIG_SECURE_BOOT) +struct imx_sec_config_fuse_t const imx_sec_config_fuse = { + .bank = 0, + .word = 6, +}; +#endif + u32 get_nr_cpus(void) { struct scu_regs *scu = (struct scu_regs *)SCU_BASE_ADDR; @@ -392,6 +400,13 @@ const struct boot_mode soc_boot_modes[] = { {NULL, 0}, }; +void reset_misc(void) +{ +#ifdef CONFIG_VIDEO_MXS + lcdif_power_down(); +#endif +} + void s_init(void) { struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR; diff --git a/arch/arm/cpu/armv7/mx7/Kconfig b/arch/arm/cpu/armv7/mx7/Kconfig index ea19e5c411..97d62389fd 100644 --- a/arch/arm/cpu/armv7/mx7/Kconfig +++ b/arch/arm/cpu/armv7/mx7/Kconfig @@ -2,9 +2,11 @@ if ARCH_MX7 config MX7 bool + select ROM_UNIFIED_SECTIONS default y config MX7D + select ROM_UNIFIED_SECTIONS bool choice diff --git a/arch/arm/cpu/armv7/mx7/Makefile b/arch/arm/cpu/armv7/mx7/Makefile index e6ecef010c..d21f87f18c 100644 --- a/arch/arm/cpu/armv7/mx7/Makefile +++ b/arch/arm/cpu/armv7/mx7/Makefile @@ -6,3 +6,7 @@ # obj-y := soc.o clock.o clock_slice.o + +ifdef CONFIG_ARMV7_PSCI +obj-y += psci-mx7.o psci.o +endif diff --git a/arch/arm/cpu/armv7/mx7/psci-mx7.c b/arch/arm/cpu/armv7/mx7/psci-mx7.c new file mode 100644 index 0000000000..9a330476cf --- /dev/null +++ b/arch/arm/cpu/armv7/mx7/psci-mx7.c @@ -0,0 +1,69 @@ +#include <asm/io.h> +#include <asm/psci.h> +#include <asm/arch/imx-regs.h> +#include <common.h> + +#define __secure __attribute__((section("._secure.text"))) + +#define GPC_CPU_PGC_SW_PDN_REQ 0xfc +#define GPC_CPU_PGC_SW_PUP_REQ 0xf0 +#define GPC_PGC_C1 0x840 + +#define BM_CPU_PGC_SW_PDN_PUP_REQ_CORE1_A7 0x2 + +/* below is for i.MX7D */ +#define SRC_GPR1_MX7D 0x074 +#define SRC_A7RCR0 0x004 +#define SRC_A7RCR1 0x008 + +#define BP_SRC_A7RCR0_A7_CORE_RESET0 0 +#define BP_SRC_A7RCR1_A7_CORE1_ENABLE 1 + +static inline void imx_gpcv2_set_m_core_pgc(bool enable, u32 offset) +{ + writel(enable, GPC_IPS_BASE_ADDR + offset); +} + +__secure void imx_gpcv2_set_core1_power(bool pdn) +{ + u32 reg = pdn ? GPC_CPU_PGC_SW_PUP_REQ : GPC_CPU_PGC_SW_PDN_REQ; + u32 val; + + imx_gpcv2_set_m_core_pgc(true, GPC_PGC_C1); + + val = readl(GPC_IPS_BASE_ADDR + reg); + val |= BM_CPU_PGC_SW_PDN_PUP_REQ_CORE1_A7; + writel(val, GPC_IPS_BASE_ADDR + reg); + + while ((readl(GPC_IPS_BASE_ADDR + reg) & + BM_CPU_PGC_SW_PDN_PUP_REQ_CORE1_A7) != 0) + ; + + imx_gpcv2_set_m_core_pgc(false, GPC_PGC_C1); +} + +__secure void imx_enable_cpu_ca7(int cpu, bool enable) +{ + u32 mask, val; + + mask = 1 << (BP_SRC_A7RCR1_A7_CORE1_ENABLE + cpu - 1); + val = readl(SRC_BASE_ADDR + SRC_A7RCR1); + val = enable ? val | mask : val & ~mask; + writel(val, SRC_BASE_ADDR + SRC_A7RCR1); +} + +__secure int imx_cpu_on(int fn, int cpu, int pc) +{ + writel(pc, SRC_BASE_ADDR + cpu * 8 + SRC_GPR1_MX7D); + imx_gpcv2_set_core1_power(true); + imx_enable_cpu_ca7(cpu, true); + return 0; +} + +__secure int imx_cpu_off(int cpu) +{ + imx_enable_cpu_ca7(cpu, false); + imx_gpcv2_set_core1_power(false); + writel(0, SRC_BASE_ADDR + cpu * 8 + SRC_GPR1_MX7D + 4); + return 0; +} diff --git a/arch/arm/cpu/armv7/mx7/psci.S b/arch/arm/cpu/armv7/mx7/psci.S new file mode 100644 index 0000000000..34c6ab33f0 --- /dev/null +++ b/arch/arm/cpu/armv7/mx7/psci.S @@ -0,0 +1,54 @@ +#include <config.h> +#include <linux/linkage.h> + +#include <asm/armv7.h> +#include <asm/arch-armv7/generictimer.h> +#include <asm/psci.h> + + .pushsection ._secure.text, "ax" + + .arch_extension sec + + @ r1 = target CPU + @ r2 = target PC + +.globl psci_arch_init +psci_arch_init: + mov r6, lr + + bl psci_get_cpu_id + bl psci_get_cpu_stack_top + mov sp, r0 + + bx r6 + + @ r1 = target CPU + @ r2 = target PC + +.globl psci_cpu_on +psci_cpu_on: + push {lr} + + mov r0, r1 + bl psci_get_cpu_stack_top + str r2, [r0] + dsb + + ldr r2, =psci_cpu_entry + bl imx_cpu_on + + pop {pc} + +.globl psci_cpu_off +psci_cpu_off: + + bl psci_cpu_off_common + bl psci_get_cpu_id + bl imx_cpu_off + +1: wfi + b 1b + + .globl psci_text_end +psci_text_end: + .popsection diff --git a/arch/arm/cpu/armv7/mx7/soc.c b/arch/arm/cpu/armv7/mx7/soc.c index 2ed05ea4f9..c777922e9d 100644 --- a/arch/arm/cpu/armv7/mx7/soc.c +++ b/arch/arm/cpu/armv7/mx7/soc.c @@ -11,6 +11,7 @@ #include <asm/arch/sys_proto.h> #include <asm/imx-common/boot_mode.h> #include <asm/imx-common/dma.h> +#include <asm/imx-common/hab.h> #include <asm/arch/crm_regs.h> #include <dm.h> #include <imx_thermal.h> @@ -28,6 +29,13 @@ U_BOOT_DEVICE(imx7_thermal) = { }; #endif +#if defined(CONFIG_SECURE_BOOT) +struct imx_sec_config_fuse_t const imx_sec_config_fuse = { + .bank = 1, + .word = 3, +}; +#endif + /* * OCOTP_TESTER3[9:8] (see Fusemap Description Table offset 0x440) * defines a 2-bit SPEED_GRADING @@ -114,10 +122,19 @@ u32 __weak get_board_rev(void) } #endif +/* enable all periherial can be accessed in nosec mode */ +static void init_csu(void) +{ + int i = 0; + for (i = 0; i < CSU_NUM_REGS; i++) + writel(CSU_INIT_SEC_LEVEL0, CSU_IPS_BASE_ADDR + i * 4); +} + int arch_cpu_init(void) { init_aips(); + init_csu(); /* Disable PDE bit of WMCR register */ imx_set_wdog_powerdown(false); |
