summaryrefslogtreecommitdiffstats
path: root/arch/arm/cpu/armv7
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/cpu/armv7')
-rw-r--r--arch/arm/cpu/armv7/am33xx/board.c85
-rw-r--r--arch/arm/cpu/armv7/am33xx/clock.c8
-rw-r--r--arch/arm/cpu/armv7/exynos/clock.c17
-rw-r--r--arch/arm/cpu/armv7/exynos/pinmux.c80
-rw-r--r--arch/arm/cpu/armv7/omap3/Makefile1
-rw-r--r--arch/arm/cpu/armv7/omap3/am35x_musb.c75
6 files changed, 229 insertions, 37 deletions
diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c
index e4c123cd21..da5bc73185 100644
--- a/arch/arm/cpu/armv7/am33xx/board.c
+++ b/arch/arm/cpu/armv7/am33xx/board.c
@@ -33,6 +33,11 @@
#include <i2c.h>
#include <miiphy.h>
#include <cpsw.h>
+#include <asm/errno.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/musb.h>
+#include <asm/omap_musb.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -63,3 +68,83 @@ void setup_clocks_for_console(void)
/* Not yet implemented */
return;
}
+
+/* AM33XX has two MUSB controllers which can be host or gadget */
+#if (defined(CONFIG_MUSB_GADGET) || defined(CONFIG_MUSB_HOST)) && \
+ (defined(CONFIG_AM335X_USB0) || defined(CONFIG_AM335X_USB1))
+static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
+
+/* USB 2.0 PHY Control */
+#define CM_PHY_PWRDN (1 << 0)
+#define CM_PHY_OTG_PWRDN (1 << 1)
+#define OTGVDET_EN (1 << 19)
+#define OTGSESSENDEN (1 << 20)
+
+static void am33xx_usb_set_phy_power(u8 on, u32 *reg_addr)
+{
+ if (on) {
+ clrsetbits_le32(reg_addr, CM_PHY_PWRDN | CM_PHY_OTG_PWRDN,
+ OTGVDET_EN | OTGSESSENDEN);
+ } else {
+ clrsetbits_le32(reg_addr, 0, CM_PHY_PWRDN | CM_PHY_OTG_PWRDN);
+ }
+}
+
+static struct musb_hdrc_config musb_config = {
+ .multipoint = 1,
+ .dyn_fifo = 1,
+ .num_eps = 16,
+ .ram_bits = 12,
+};
+
+#ifdef CONFIG_AM335X_USB0
+static void am33xx_otg0_set_phy_power(u8 on)
+{
+ am33xx_usb_set_phy_power(on, &cdev->usb_ctrl0);
+}
+
+struct omap_musb_board_data otg0_board_data = {
+ .set_phy_power = am33xx_otg0_set_phy_power,
+};
+
+static struct musb_hdrc_platform_data otg0_plat = {
+ .mode = CONFIG_AM335X_USB0_MODE,
+ .config = &musb_config,
+ .power = 50,
+ .platform_ops = &musb_dsps_ops,
+ .board_data = &otg0_board_data,
+};
+#endif
+
+#ifdef CONFIG_AM335X_USB1
+static void am33xx_otg1_set_phy_power(u8 on)
+{
+ am33xx_usb_set_phy_power(on, &cdev->usb_ctrl1);
+}
+
+struct omap_musb_board_data otg1_board_data = {
+ .set_phy_power = am33xx_otg1_set_phy_power,
+};
+
+static struct musb_hdrc_platform_data otg1_plat = {
+ .mode = CONFIG_AM335X_USB1_MODE,
+ .config = &musb_config,
+ .power = 50,
+ .platform_ops = &musb_dsps_ops,
+ .board_data = &otg1_board_data,
+};
+#endif
+#endif
+
+int arch_misc_init(void)
+{
+#ifdef CONFIG_AM335X_USB0
+ musb_register(&otg0_plat, &otg0_board_data,
+ (void *)AM335X_USB0_OTG_BASE);
+#endif
+#ifdef CONFIG_AM335X_USB1
+ musb_register(&otg1_plat, &otg1_board_data,
+ (void *)AM335X_USB1_OTG_BASE);
+#endif
+ return 0;
+}
diff --git a/arch/arm/cpu/armv7/am33xx/clock.c b/arch/arm/cpu/armv7/am33xx/clock.c
index bc2abb657c..0b4cb4e529 100644
--- a/arch/arm/cpu/armv7/am33xx/clock.c
+++ b/arch/arm/cpu/armv7/am33xx/clock.c
@@ -40,6 +40,7 @@
#define CLK_MODE_MASK 0xfffffff8
#define CLK_DIV_SEL 0xFFFFFFE0
#define CPGMAC0_IDLE 0x30000
+#define DPLL_CLKDCOLDO_GATE_CTRL 0x300
const struct cm_perpll *cmper = (struct cm_perpll *)CM_PER;
const struct cm_wkuppll *cmwkup = (struct cm_wkuppll *)CM_WKUP;
@@ -194,6 +195,11 @@ static void enable_per_clocks(void)
writel(PRCM_MOD_EN, &cmrtc->rtcclkctrl);
while (readl(&cmrtc->rtcclkctrl) != PRCM_MOD_EN)
;
+
+ /* MUSB */
+ writel(PRCM_MOD_EN, &cmper->usb0clkctrl);
+ while (readl(&cmper->usb0clkctrl) != PRCM_MOD_EN)
+ ;
}
static void mpu_pll_config(void)
@@ -290,6 +296,8 @@ static void per_pll_config(void)
while (readl(&cmwkup->idlestdpllper) != ST_DPLL_CLK)
;
+
+ writel(DPLL_CLKDCOLDO_GATE_CTRL, &cmwkup->clkdcoldodpllper);
}
void ddr_pll_config(unsigned int ddrpll_m)
diff --git a/arch/arm/cpu/armv7/exynos/clock.c b/arch/arm/cpu/armv7/exynos/clock.c
index fe61f88af4..74599798c4 100644
--- a/arch/arm/cpu/armv7/exynos/clock.c
+++ b/arch/arm/cpu/armv7/exynos/clock.c
@@ -921,6 +921,21 @@ static int exynos5_set_spi_clk(enum periph_id periph_id,
return 0;
}
+static unsigned long exynos4_get_i2c_clk(void)
+{
+ struct exynos4_clock *clk =
+ (struct exynos4_clock *)samsung_get_base_clock();
+ unsigned long sclk, aclk_100;
+ unsigned int ratio;
+
+ sclk = get_pll_clk(APLL);
+
+ ratio = (readl(&clk->div_top)) >> 4;
+ ratio &= 0xf;
+ aclk_100 = sclk / (ratio + 1);
+ return aclk_100;
+}
+
unsigned long get_pll_clk(int pllreg)
{
if (cpu_is_exynos5())
@@ -941,6 +956,8 @@ unsigned long get_i2c_clk(void)
{
if (cpu_is_exynos5()) {
return exynos5_get_i2c_clk();
+ } else if (cpu_is_exynos4()) {
+ return exynos4_get_i2c_clk();
} else {
debug("I2C clock is not set for this CPU\n");
return 0;
diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c
index f02f441a8b..20a4b8414a 100644
--- a/arch/arm/cpu/armv7/exynos/pinmux.c
+++ b/arch/arm/cpu/armv7/exynos/pinmux.c
@@ -329,54 +329,60 @@ static int exynos5_pinmux_config(int peripheral, int flags)
return 0;
}
-static int exynos4_mmc_config(int peripheral, int flags)
+static void exynos4_i2c_config(int peripheral, int flags)
{
- struct exynos4_gpio_part2 *gpio2 =
- (struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2();
- struct s5p_gpio_bank *bank, *bank_ext;
- int i;
+ struct exynos4_gpio_part1 *gpio1 =
+ (struct exynos4_gpio_part1 *) samsung_get_base_gpio_part1();
switch (peripheral) {
- case PERIPH_ID_SDMMC0:
- bank = &gpio2->k0;
- bank_ext = &gpio2->k1;
+ case PERIPH_ID_I2C0:
+ s5p_gpio_cfg_pin(&gpio1->d1, 0, GPIO_FUNC(0x2));
+ s5p_gpio_cfg_pin(&gpio1->d1, 1, GPIO_FUNC(0x2));
break;
- case PERIPH_ID_SDMMC2:
- bank = &gpio2->k2;
- bank_ext = &gpio2->k3;
+ case PERIPH_ID_I2C1:
+ s5p_gpio_cfg_pin(&gpio1->d1, 2, GPIO_FUNC(0x2));
+ s5p_gpio_cfg_pin(&gpio1->d1, 3, GPIO_FUNC(0x2));
+ break;
+ case PERIPH_ID_I2C2:
+ s5p_gpio_cfg_pin(&gpio1->a0, 6, GPIO_FUNC(0x3));
+ s5p_gpio_cfg_pin(&gpio1->a0, 7, GPIO_FUNC(0x3));
+ break;
+ case PERIPH_ID_I2C3:
+ s5p_gpio_cfg_pin(&gpio1->a1, 2, GPIO_FUNC(0x3));
+ s5p_gpio_cfg_pin(&gpio1->a1, 3, GPIO_FUNC(0x3));
+ break;
+ case PERIPH_ID_I2C4:
+ s5p_gpio_cfg_pin(&gpio1->b, 2, GPIO_FUNC(0x3));
+ s5p_gpio_cfg_pin(&gpio1->b, 3, GPIO_FUNC(0x3));
+ break;
+ case PERIPH_ID_I2C5:
+ s5p_gpio_cfg_pin(&gpio1->b, 6, GPIO_FUNC(0x3));
+ s5p_gpio_cfg_pin(&gpio1->b, 7, GPIO_FUNC(0x3));
+ break;
+ case PERIPH_ID_I2C6:
+ s5p_gpio_cfg_pin(&gpio1->c1, 3, GPIO_FUNC(0x4));
+ s5p_gpio_cfg_pin(&gpio1->c1, 4, GPIO_FUNC(0x4));
+ break;
+ case PERIPH_ID_I2C7:
+ s5p_gpio_cfg_pin(&gpio1->d0, 2, GPIO_FUNC(0x3));
+ s5p_gpio_cfg_pin(&gpio1->d0, 3, GPIO_FUNC(0x3));
break;
- default:
- return -1;
- }
- for (i = 0; i < 7; i++) {
- if (i == 2)
- continue;
- s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
- s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE);
- s5p_gpio_set_drv(bank, i, GPIO_DRV_4X);
- }
- if (flags & PINMUX_FLAG_8BIT_MODE) {
- for (i = 3; i < 7; i++) {
- s5p_gpio_cfg_pin(bank_ext, i, GPIO_FUNC(0x3));
- s5p_gpio_set_pull(bank_ext, i, GPIO_PULL_NONE);
- s5p_gpio_set_drv(bank_ext, i, GPIO_DRV_4X);
- }
}
-
- return 0;
}
static int exynos4_pinmux_config(int peripheral, int flags)
{
switch (peripheral) {
- case PERIPH_ID_SDMMC0:
- case PERIPH_ID_SDMMC2:
- return exynos4_mmc_config(peripheral, flags);
- case PERIPH_ID_SDMMC1:
- case PERIPH_ID_SDMMC3:
- case PERIPH_ID_SDMMC4:
- printf("SDMMC device %d not implemented\n", peripheral);
- return -1;
+ case PERIPH_ID_I2C0:
+ case PERIPH_ID_I2C1:
+ case PERIPH_ID_I2C2:
+ case PERIPH_ID_I2C3:
+ case PERIPH_ID_I2C4:
+ case PERIPH_ID_I2C5:
+ case PERIPH_ID_I2C6:
+ case PERIPH_ID_I2C7:
+ exynos4_i2c_config(peripheral, flags);
+ break;
default:
debug("%s: invalid peripheral %d", __func__, peripheral);
return -1;
diff --git a/arch/arm/cpu/armv7/omap3/Makefile b/arch/arm/cpu/armv7/omap3/Makefile
index ac597be25a..de167eea56 100644
--- a/arch/arm/cpu/armv7/omap3/Makefile
+++ b/arch/arm/cpu/armv7/omap3/Makefile
@@ -38,6 +38,7 @@ endif
COBJS-$(CONFIG_DRIVER_TI_EMAC) += emac.o
COBJS-$(CONFIG_EMIF4) += emif4.o
COBJS-$(CONFIG_SDRC) += sdrc.o
+COBJS-$(CONFIG_USB_MUSB_AM35X) += am35x_musb.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS) $(COBJS-y) $(SOBJS))
diff --git a/arch/arm/cpu/armv7/omap3/am35x_musb.c b/arch/arm/cpu/armv7/omap3/am35x_musb.c
new file mode 100644
index 0000000000..7183c4f248
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap3/am35x_musb.c
@@ -0,0 +1,75 @@
+/*
+ * This file configures the internal USB PHY in AM35X.
+ *
+ * Copyright (C) 2012 Ilya Yanok <ilya.yanok@gmail.com>
+ *
+ * Based on omap_phy_internal.c code from Linux by
+ * Hema HK <hemahk@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ *
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/am35x_def.h>
+
+void am35x_musb_reset(void)
+{
+ /* Reset the musb interface */
+ clrsetbits_le32(&am35x_scm_general_regs->ip_sw_reset,
+ 0, USBOTGSS_SW_RST);
+ clrsetbits_le32(&am35x_scm_general_regs->ip_sw_reset,
+ USBOTGSS_SW_RST, 0);
+}
+
+void am35x_musb_phy_power(u8 on)
+{
+ unsigned long start = get_timer(0);
+
+ if (on) {
+ /*
+ * Start the on-chip PHY and its PLL.
+ */
+ clrsetbits_le32(&am35x_scm_general_regs->devconf2,
+ CONF2_RESET | CONF2_PHYPWRDN | CONF2_OTGPWRDN,
+ CONF2_PHY_PLLON);
+
+ debug("Waiting for PHY clock good...\n");
+ while (!(readl(&am35x_scm_general_regs->devconf2)
+ & CONF2_PHYCLKGD)) {
+
+ if (get_timer(start) > CONFIG_SYS_HZ / 10) {
+ printf("musb PHY clock good timed out\n");
+ break;
+ }
+ }
+ } else {
+ /*
+ * Power down the on-chip PHY.
+ */
+ clrsetbits_le32(&am35x_scm_general_regs->devconf2,
+ CONF2_PHY_PLLON,
+ CONF2_PHYPWRDN | CONF2_OTGPWRDN);
+ }
+}
+
+void am35x_musb_clear_irq(void)
+{
+ clrsetbits_le32(&am35x_scm_general_regs->lvl_intr_clr,
+ 0, USBOTGSS_INT_CLR);
+ readl(&am35x_scm_general_regs->lvl_intr_clr);
+}
+
OpenPOWER on IntegriCloud