diff options
Diffstat (limited to 'arch/arm/cpu/armv7/keystone/ddr3.c')
| -rw-r--r-- | arch/arm/cpu/armv7/keystone/ddr3.c | 404 |
1 files changed, 0 insertions, 404 deletions
diff --git a/arch/arm/cpu/armv7/keystone/ddr3.c b/arch/arm/cpu/armv7/keystone/ddr3.c deleted file mode 100644 index dfb27b5ba2..0000000000 --- a/arch/arm/cpu/armv7/keystone/ddr3.c +++ /dev/null @@ -1,404 +0,0 @@ -/* - * Keystone2: DDR3 initialization - * - * (C) Copyright 2012-2014 - * Texas Instruments Incorporated, <www.ti.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <asm/io.h> -#include <common.h> -#include <asm/arch/msmc.h> -#include <asm/arch/ddr3.h> -#include <asm/arch/psc_defs.h> - -#include <asm/ti-common/ti-edma3.h> - -#define DDR3_EDMA_BLK_SIZE_SHIFT 10 -#define DDR3_EDMA_BLK_SIZE (1 << DDR3_EDMA_BLK_SIZE_SHIFT) -#define DDR3_EDMA_BCNT 0x8000 -#define DDR3_EDMA_CCNT 1 -#define DDR3_EDMA_XF_SIZE (DDR3_EDMA_BLK_SIZE * DDR3_EDMA_BCNT) -#define DDR3_EDMA_SLOT_NUM 1 - -void ddr3_init_ddrphy(u32 base, struct ddr3_phy_config *phy_cfg) -{ - unsigned int tmp; - - while ((__raw_readl(base + KS2_DDRPHY_PGSR0_OFFSET) - & 0x00000001) != 0x00000001) - ; - - __raw_writel(phy_cfg->pllcr, base + KS2_DDRPHY_PLLCR_OFFSET); - - tmp = __raw_readl(base + KS2_DDRPHY_PGCR1_OFFSET); - tmp &= ~(phy_cfg->pgcr1_mask); - tmp |= phy_cfg->pgcr1_val; - __raw_writel(tmp, base + KS2_DDRPHY_PGCR1_OFFSET); - - __raw_writel(phy_cfg->ptr0, base + KS2_DDRPHY_PTR0_OFFSET); - __raw_writel(phy_cfg->ptr1, base + KS2_DDRPHY_PTR1_OFFSET); - __raw_writel(phy_cfg->ptr3, base + KS2_DDRPHY_PTR3_OFFSET); - __raw_writel(phy_cfg->ptr4, base + KS2_DDRPHY_PTR4_OFFSET); - - tmp = __raw_readl(base + KS2_DDRPHY_DCR_OFFSET); - tmp &= ~(phy_cfg->dcr_mask); - tmp |= phy_cfg->dcr_val; - __raw_writel(tmp, base + KS2_DDRPHY_DCR_OFFSET); - - __raw_writel(phy_cfg->dtpr0, base + KS2_DDRPHY_DTPR0_OFFSET); - __raw_writel(phy_cfg->dtpr1, base + KS2_DDRPHY_DTPR1_OFFSET); - __raw_writel(phy_cfg->dtpr2, base + KS2_DDRPHY_DTPR2_OFFSET); - __raw_writel(phy_cfg->mr0, base + KS2_DDRPHY_MR0_OFFSET); - __raw_writel(phy_cfg->mr1, base + KS2_DDRPHY_MR1_OFFSET); - __raw_writel(phy_cfg->mr2, base + KS2_DDRPHY_MR2_OFFSET); - __raw_writel(phy_cfg->dtcr, base + KS2_DDRPHY_DTCR_OFFSET); - __raw_writel(phy_cfg->pgcr2, base + KS2_DDRPHY_PGCR2_OFFSET); - - __raw_writel(phy_cfg->zq0cr1, base + KS2_DDRPHY_ZQ0CR1_OFFSET); - __raw_writel(phy_cfg->zq1cr1, base + KS2_DDRPHY_ZQ1CR1_OFFSET); - __raw_writel(phy_cfg->zq2cr1, base + KS2_DDRPHY_ZQ2CR1_OFFSET); - - __raw_writel(phy_cfg->pir_v1, base + KS2_DDRPHY_PIR_OFFSET); - while ((__raw_readl(base + KS2_DDRPHY_PGSR0_OFFSET) & 0x1) != 0x1) - ; - - __raw_writel(phy_cfg->pir_v2, base + KS2_DDRPHY_PIR_OFFSET); - while ((__raw_readl(base + KS2_DDRPHY_PGSR0_OFFSET) & 0x1) != 0x1) - ; -} - -void ddr3_init_ddremif(u32 base, struct ddr3_emif_config *emif_cfg) -{ - __raw_writel(emif_cfg->sdcfg, base + KS2_DDR3_SDCFG_OFFSET); - __raw_writel(emif_cfg->sdtim1, base + KS2_DDR3_SDTIM1_OFFSET); - __raw_writel(emif_cfg->sdtim2, base + KS2_DDR3_SDTIM2_OFFSET); - __raw_writel(emif_cfg->sdtim3, base + KS2_DDR3_SDTIM3_OFFSET); - __raw_writel(emif_cfg->sdtim4, base + KS2_DDR3_SDTIM4_OFFSET); - __raw_writel(emif_cfg->zqcfg, base + KS2_DDR3_ZQCFG_OFFSET); - __raw_writel(emif_cfg->sdrfc, base + KS2_DDR3_SDRFC_OFFSET); -} - -int ddr3_ecc_support_rmw(u32 base) -{ - u32 value = __raw_readl(base + KS2_DDR3_MIDR_OFFSET); - - /* Check the DDR3 controller ID reg if the controllers - supports ECC RMW or not */ - if (value == 0x40461C02) - return 1; - - return 0; -} - -static void ddr3_ecc_config(u32 base, u32 value) -{ - u32 data; - - __raw_writel(value, base + KS2_DDR3_ECC_CTRL_OFFSET); - udelay(100000); /* delay required to synchronize across clock domains */ - - if (value & KS2_DDR3_ECC_EN) { - /* Clear the 1-bit error count */ - data = __raw_readl(base + KS2_DDR3_ONE_BIT_ECC_ERR_CNT_OFFSET); - __raw_writel(data, base + KS2_DDR3_ONE_BIT_ECC_ERR_CNT_OFFSET); - - /* enable the ECC interrupt */ - __raw_writel(KS2_DDR3_1B_ECC_ERR_SYS | KS2_DDR3_2B_ECC_ERR_SYS | - KS2_DDR3_WR_ECC_ERR_SYS, - base + KS2_DDR3_ECC_INT_ENABLE_SET_SYS_OFFSET); - - /* Clear the ECC error interrupt status */ - __raw_writel(KS2_DDR3_1B_ECC_ERR_SYS | KS2_DDR3_2B_ECC_ERR_SYS | - KS2_DDR3_WR_ECC_ERR_SYS, - base + KS2_DDR3_ECC_INT_STATUS_OFFSET); - } -} - -static void ddr3_reset_data(u32 base, u32 ddr3_size) -{ - u32 mpax[2]; - u32 seg_num; - u32 seg, blks, dst, edma_blks; - struct edma3_slot_config slot; - struct edma3_channel_config edma_channel; - u32 edma_src[DDR3_EDMA_BLK_SIZE/4] __aligned(16) = {0, }; - - /* Setup an edma to copy the 1k block to the entire DDR */ - puts("\nClear entire DDR3 memory to enable ECC\n"); - - /* save the SES MPAX regs */ - msmc_get_ses_mpax(8, 0, mpax); - - /* setup edma slot 1 configuration */ - slot.opt = EDMA3_SLOPT_TRANS_COMP_INT_ENB | - EDMA3_SLOPT_COMP_CODE(0) | - EDMA3_SLOPT_STATIC | EDMA3_SLOPT_AB_SYNC; - slot.bcnt = DDR3_EDMA_BCNT; - slot.acnt = DDR3_EDMA_BLK_SIZE; - slot.ccnt = DDR3_EDMA_CCNT; - slot.src_bidx = 0; - slot.dst_bidx = DDR3_EDMA_BLK_SIZE; - slot.src_cidx = 0; - slot.dst_cidx = 0; - slot.link = EDMA3_PARSET_NULL_LINK; - slot.bcntrld = 0; - edma3_slot_configure(KS2_EDMA0_BASE, DDR3_EDMA_SLOT_NUM, &slot); - - /* configure quik edma channel */ - edma_channel.slot = DDR3_EDMA_SLOT_NUM; - edma_channel.chnum = 0; - edma_channel.complete_code = 0; - /* event trigger after dst update */ - edma_channel.trigger_slot_word = EDMA3_TWORD(dst); - qedma3_start(KS2_EDMA0_BASE, &edma_channel); - - /* DDR3 size in segments (4KB seg size) */ - seg_num = ddr3_size << (30 - KS2_MSMC_SEG_SIZE_SHIFT); - - for (seg = 0; seg < seg_num; seg += KS2_MSMC_MAP_SEG_NUM) { - /* map 2GB 36-bit DDR address to 32-bit DDR address in EMIF - access slave interface so that edma driver can access */ - msmc_map_ses_segment(8, 0, base >> KS2_MSMC_SEG_SIZE_SHIFT, - KS2_MSMC_DST_SEG_BASE + seg, MPAX_SEG_2G); - - if ((seg_num - seg) > KS2_MSMC_MAP_SEG_NUM) - edma_blks = KS2_MSMC_MAP_SEG_NUM << - (KS2_MSMC_SEG_SIZE_SHIFT - - DDR3_EDMA_BLK_SIZE_SHIFT); - else - edma_blks = (seg_num - seg) << (KS2_MSMC_SEG_SIZE_SHIFT - - DDR3_EDMA_BLK_SIZE_SHIFT); - - /* Use edma driver to scrub 2GB DDR memory */ - for (dst = base, blks = 0; blks < edma_blks; - blks += DDR3_EDMA_BCNT, dst += DDR3_EDMA_XF_SIZE) { - edma3_set_src_addr(KS2_EDMA0_BASE, - edma_channel.slot, (u32)edma_src); - edma3_set_dest_addr(KS2_EDMA0_BASE, - edma_channel.slot, (u32)dst); - - while (edma3_check_for_transfer(KS2_EDMA0_BASE, - &edma_channel)) - udelay(10); - } - } - - qedma3_stop(KS2_EDMA0_BASE, &edma_channel); - - /* restore the SES MPAX regs */ - msmc_set_ses_mpax(8, 0, mpax); -} - -static void ddr3_ecc_init_range(u32 base) -{ - u32 ecc_val = KS2_DDR3_ECC_EN; - u32 rmw = ddr3_ecc_support_rmw(base); - - if (rmw) - ecc_val |= KS2_DDR3_ECC_RMW_EN; - - __raw_writel(0, base + KS2_DDR3_ECC_ADDR_RANGE1_OFFSET); - - ddr3_ecc_config(base, ecc_val); -} - -void ddr3_enable_ecc(u32 base, int test) -{ - u32 ecc_val = KS2_DDR3_ECC_ENABLE; - u32 rmw = ddr3_ecc_support_rmw(base); - - if (test) - ecc_val |= KS2_DDR3_ECC_ADDR_RNG_1_EN; - - if (!rmw) { - if (!test) - /* by default, disable ecc when rmw = 0 and no - ecc test */ - ecc_val = 0; - } else { - ecc_val |= KS2_DDR3_ECC_RMW_EN; - } - - ddr3_ecc_config(base, ecc_val); -} - -void ddr3_disable_ecc(u32 base) -{ - ddr3_ecc_config(base, 0); -} - -#if defined(CONFIG_SOC_K2HK) || defined(CONFIG_SOC_K2L) -static void cic_init(u32 base) -{ - /* Disable CIC global interrupts */ - __raw_writel(0, base + KS2_CIC_GLOBAL_ENABLE); - - /* Set to normal mode, no nesting, no priority hold */ - __raw_writel(0, base + KS2_CIC_CTRL); - __raw_writel(0, base + KS2_CIC_HOST_CTRL); - - /* Enable CIC global interrupts */ - __raw_writel(1, base + KS2_CIC_GLOBAL_ENABLE); -} - -static void cic_map_cic_to_gic(u32 base, u32 chan_num, u32 irq_num) -{ - /* Map the system interrupt to a CIC channel */ - __raw_writeb(chan_num, base + KS2_CIC_CHAN_MAP(0) + irq_num); - - /* Enable CIC system interrupt */ - __raw_writel(irq_num, base + KS2_CIC_SYS_ENABLE_IDX_SET); - - /* Enable CIC Host interrupt */ - __raw_writel(chan_num, base + KS2_CIC_HOST_ENABLE_IDX_SET); -} - -static void ddr3_map_ecc_cic2_irq(u32 base) -{ - cic_init(base); - cic_map_cic_to_gic(base, KS2_CIC2_DDR3_ECC_CHAN_NUM, - KS2_CIC2_DDR3_ECC_IRQ_NUM); -} -#endif - -void ddr3_init_ecc(u32 base, u32 ddr3_size) -{ - if (!ddr3_ecc_support_rmw(base)) { - ddr3_disable_ecc(base); - return; - } - - ddr3_ecc_init_range(base); - ddr3_reset_data(CONFIG_SYS_SDRAM_BASE, ddr3_size); - - /* mapping DDR3 ECC system interrupt from CIC2 to GIC */ -#if defined(CONFIG_SOC_K2HK) || defined(CONFIG_SOC_K2L) - ddr3_map_ecc_cic2_irq(KS2_CIC2_BASE); -#endif - ddr3_enable_ecc(base, 0); -} - -void ddr3_check_ecc_int(u32 base) -{ - char *env; - int ecc_test = 0; - u32 value = __raw_readl(base + KS2_DDR3_ECC_INT_STATUS_OFFSET); - - env = getenv("ecc_test"); - if (env) - ecc_test = simple_strtol(env, NULL, 0); - - if (value & KS2_DDR3_WR_ECC_ERR_SYS) - puts("DDR3 ECC write error interrupted\n"); - - if (value & KS2_DDR3_2B_ECC_ERR_SYS) { - puts("DDR3 ECC 2-bit error interrupted\n"); - - if (!ecc_test) { - puts("Reseting the device ...\n"); - reset_cpu(0); - } - } - - value = __raw_readl(base + KS2_DDR3_ONE_BIT_ECC_ERR_CNT_OFFSET); - if (value) { - printf("1-bit ECC err count: 0x%x\n", value); - value = __raw_readl(base + - KS2_DDR3_ONE_BIT_ECC_ERR_ADDR_LOG_OFFSET); - printf("1-bit ECC err address log: 0x%x\n", value); - } -} - -void ddr3_reset_ddrphy(void) -{ - u32 tmp; - - /* Assert DDR3A PHY reset */ - tmp = readl(KS2_DDR3APLLCTL1); - tmp |= KS2_DDR3_PLLCTRL_PHY_RESET; - writel(tmp, KS2_DDR3APLLCTL1); - - /* wait 10us to catch the reset */ - udelay(10); - - /* Release DDR3A PHY reset */ - tmp = readl(KS2_DDR3APLLCTL1); - tmp &= ~KS2_DDR3_PLLCTRL_PHY_RESET; - __raw_writel(tmp, KS2_DDR3APLLCTL1); -} - -#ifdef CONFIG_SOC_K2HK -/** - * ddr3_reset_workaround - reset workaround in case if leveling error - * detected for PG 1.0 and 1.1 k2hk SoCs - */ -void ddr3_err_reset_workaround(void) -{ - unsigned int tmp; - unsigned int tmp_a; - unsigned int tmp_b; - - /* - * Check for PGSR0 error bits of DDR3 PHY. - * Check for WLERR, QSGERR, WLAERR, - * RDERR, WDERR, REERR, WEERR error to see if they are set or not - */ - tmp_a = __raw_readl(KS2_DDR3A_DDRPHYC + KS2_DDRPHY_PGSR0_OFFSET); - tmp_b = __raw_readl(KS2_DDR3B_DDRPHYC + KS2_DDRPHY_PGSR0_OFFSET); - - if (((tmp_a & 0x0FE00000) != 0) || ((tmp_b & 0x0FE00000) != 0)) { - printf("DDR Leveling Error Detected!\n"); - printf("DDR3A PGSR0 = 0x%x\n", tmp_a); - printf("DDR3B PGSR0 = 0x%x\n", tmp_b); - - /* - * Write Keys to KICK registers to enable writes to registers - * in boot config space - */ - __raw_writel(KS2_KICK0_MAGIC, KS2_KICK0); - __raw_writel(KS2_KICK1_MAGIC, KS2_KICK1); - - /* - * Move DDR3A Module out of reset isolation by setting - * MDCTL23[12] = 0 - */ - tmp_a = __raw_readl(KS2_PSC_BASE + - PSC_REG_MDCTL(KS2_LPSC_EMIF4F_DDR3A)); - - tmp_a = PSC_REG_MDCTL_SET_RESET_ISO(tmp_a, 0); - __raw_writel(tmp_a, KS2_PSC_BASE + - PSC_REG_MDCTL(KS2_LPSC_EMIF4F_DDR3A)); - - /* - * Move DDR3B Module out of reset isolation by setting - * MDCTL24[12] = 0 - */ - tmp_b = __raw_readl(KS2_PSC_BASE + - PSC_REG_MDCTL(KS2_LPSC_EMIF4F_DDR3B)); - tmp_b = PSC_REG_MDCTL_SET_RESET_ISO(tmp_b, 0); - __raw_writel(tmp_b, KS2_PSC_BASE + - PSC_REG_MDCTL(KS2_LPSC_EMIF4F_DDR3B)); - - /* - * Write 0x5A69 Key to RSTCTRL[15:0] to unlock writes - * to RSTCTRL and RSTCFG - */ - tmp = __raw_readl(KS2_RSTCTRL); - tmp &= KS2_RSTCTRL_MASK; - tmp |= KS2_RSTCTRL_KEY; - __raw_writel(tmp, KS2_RSTCTRL); - - /* - * Set PLL Controller to drive hard reset on SW trigger by - * setting RSTCFG[13] = 0 - */ - tmp = __raw_readl(KS2_RSTCTRL_RSCFG); - tmp &= ~KS2_RSTYPE_PLL_SOFT; - __raw_writel(tmp, KS2_RSTCTRL_RSCFG); - - reset_cpu(0); - } -} -#endif |
