diff options
Diffstat (limited to 'arch/arm/cpu/arm926ejs')
65 files changed, 140 insertions, 7445 deletions
diff --git a/arch/arm/cpu/arm926ejs/Makefile b/arch/arm/cpu/arm926ejs/Makefile index adcea9f683..f5944cc965 100644 --- a/arch/arm/cpu/arm926ejs/Makefile +++ b/arch/arm/cpu/arm926ejs/Makefile @@ -15,16 +15,10 @@ endif endif obj-$(CONFIG_ARMADA100) += armada100/ -obj-$(CONFIG_AT91FAMILY) += at91/ -obj-$(CONFIG_ARCH_DAVINCI) += davinci/ -obj-$(CONFIG_KIRKWOOD) += kirkwood/ obj-$(if $(filter lpc32xx,$(SOC)),y) += lpc32xx/ obj-$(CONFIG_MB86R0x) += mb86r0x/ obj-$(CONFIG_MX25) += mx25/ obj-$(CONFIG_MX27) += mx27/ obj-$(if $(filter mxs,$(SOC)),y) += mxs/ -obj-$(CONFIG_ARCH_NOMADIK) += nomadik/ -obj-$(CONFIG_ORION5X) += orion5x/ obj-$(CONFIG_PANTHEON) += pantheon/ obj-$(if $(filter spear,$(SOC)),y) += spear/ -obj-$(CONFIG_ARCH_VERSATILE) += versatile/ diff --git a/arch/arm/cpu/arm926ejs/at91/Makefile b/arch/arm/cpu/arm926ejs/at91/Makefile deleted file mode 100644 index 698a28dc5d..0000000000 --- a/arch/arm/cpu/arm926ejs/at91/Makefile +++ /dev/null @@ -1,29 +0,0 @@ -# -# (C) Copyright 2000-2008 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-$(CONFIG_AT91CAP9) += at91cap9_devices.o -obj-$(CONFIG_AT91SAM9260) += at91sam9260_devices.o -obj-$(CONFIG_AT91SAM9G20) += at91sam9260_devices.o -obj-$(CONFIG_AT91SAM9XE) += at91sam9260_devices.o -obj-$(CONFIG_AT91SAM9261) += at91sam9261_devices.o -obj-$(CONFIG_AT91SAM9G10) += at91sam9261_devices.o -obj-$(CONFIG_AT91SAM9263) += at91sam9263_devices.o -obj-$(CONFIG_AT91SAM9RL) += at91sam9rl_devices.o -obj-$(CONFIG_AT91SAM9M10G45) += at91sam9m10g45_devices.o -obj-$(CONFIG_AT91SAM9G45) += at91sam9m10g45_devices.o -obj-$(CONFIG_AT91SAM9N12) += at91sam9n12_devices.o -obj-$(CONFIG_AT91SAM9X5) += at91sam9x5_devices.o -obj-$(CONFIG_AT91_EFLASH) += eflash.o -obj-$(CONFIG_AT91_LED) += led.o -obj-y += clock.o -obj-y += cpu.o -obj-y += reset.o -obj-y += timer.o - -ifndef CONFIG_SKIP_LOWLEVEL_INIT -obj-y += lowlevel_init.o -endif diff --git a/arch/arm/cpu/arm926ejs/at91/at91cap9_devices.c b/arch/arm/cpu/arm926ejs/at91/at91cap9_devices.c deleted file mode 100644 index 16eeca7378..0000000000 --- a/arch/arm/cpu/arm926ejs/at91/at91cap9_devices.c +++ /dev/null @@ -1,189 +0,0 @@ -/* - * (C) Copyright 2007-2008 - * Stelian Pop <stelian@popies.net> - * Lead Tech Design <www.leadtechdesign.com> - * - * (C) Copyright 2009 - * Daniel Gorsulowski <daniel.gorsulowski@esd.eu> - * esd electronic system design gmbh <www.esd.eu> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/arch/at91_common.h> -#include <asm/arch/at91_pmc.h> -#include <asm/arch/gpio.h> -#include <asm/arch/io.h> - -void at91_serial0_hw_init(void) -{ - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; - - at91_set_a_periph(AT91_PIO_PORTA, 22, 1); /* TXD0 */ - at91_set_a_periph(AT91_PIO_PORTA, 23, 0); /* RXD0 */ - writel(1 << AT91CAP9_ID_US0, &pmc->pcer); -} - -void at91_serial1_hw_init(void) -{ - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; - - at91_set_a_periph(AT91_PIO_PORTD, 0, 1); /* TXD1 */ - at91_set_a_periph(AT91_PIO_PORTD, 1, 0); /* RXD1 */ - writel(1 << AT91CAP9_ID_US1, &pmc->pcer); -} - -void at91_serial2_hw_init(void) -{ - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; - - at91_set_a_periph(AT91_PIO_PORTD, 2, 1); /* TXD2 */ - at91_set_a_periph(AT91_PIO_PORTD, 3, 0); /* RXD2 */ - writel(1 << AT91CAP9_ID_US2, &pmc->pcer); -} - -void at91_serial3_hw_init(void) -{ - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; - - at91_set_a_periph(AT91_PIO_PORTC, 30, 0); /* DRXD */ - at91_set_a_periph(AT91_PIO_PORTC, 31, 1); /* DTXD */ - writel(1 << AT91_ID_SYS, &pmc->pcer); -} - -void at91_serial_hw_init(void) -{ -#ifdef CONFIG_USART0 - at91_serial0_hw_init(); -#endif - -#ifdef CONFIG_USART1 - at91_serial1_hw_init(); -#endif - -#ifdef CONFIG_USART2 - at91_serial2_hw_init(); -#endif - -#ifdef CONFIG_USART3 /* DBGU */ - at91_serial3_hw_init(); -#endif -} - -#ifdef CONFIG_HAS_DATAFLASH -void at91_spi0_hw_init(unsigned long cs_mask) -{ - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; - - at91_set_b_periph(AT91_PIO_PORTA, 0, 0); /* SPI0_MISO */ - at91_set_b_periph(AT91_PIO_PORTA, 1, 0); /* SPI0_MOSI */ - at91_set_b_periph(AT91_PIO_PORTA, 2, 0); /* SPI0_SPCK */ - - /* Enable clock */ - writel(1 << AT91CAP9_ID_SPI0, &pmc->pcer); - - if (cs_mask & (1 << 0)) { - at91_set_b_periph(AT91_PIO_PORTA, 5, 1); - } - if (cs_mask & (1 << 1)) { - at91_set_b_periph(AT91_PIO_PORTA, 3, 1); - } - if (cs_mask & (1 << 2)) { - at91_set_b_periph(AT91_PIO_PORTD, 0, 1); - } - if (cs_mask & (1 << 3)) { - at91_set_b_periph(AT91_PIO_PORTD, 1, 1); - } - if (cs_mask & (1 << 4)) { - at91_set_pio_output(AT91_PIO_PORTA, 5, 1); - } - if (cs_mask & (1 << 5)) { - at91_set_pio_output(AT91_PIO_PORTA, 3, 1); - } - if (cs_mask & (1 << 6)) { - at91_set_pio_output(AT91_PIO_PORTD, 0, 1); - } - if (cs_mask & (1 << 7)) { - at91_set_pio_output(AT91_PIO_PORTD, 1, 1); - } -} - -void at91_spi1_hw_init(unsigned long cs_mask) -{ - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; - - at91_set_a_periph(AT91_PIO_PORTB, 12, 0); /* SPI1_MISO */ - at91_set_a_periph(AT91_PIO_PORTB, 13, 0); /* SPI1_MOSI */ - at91_set_a_periph(AT91_PIO_PORTB, 14, 0); /* SPI1_SPCK */ - - /* Enable clock */ - writel(1 << AT91CAP9_ID_SPI1, &pmc->pcer); - - if (cs_mask & (1 << 0)) { - at91_set_a_periph(AT91_PIO_PORTB, 15, 1); - } - if (cs_mask & (1 << 1)) { - at91_set_a_periph(AT91_PIO_PORTB, 16, 1); - } - if (cs_mask & (1 << 2)) { - at91_set_a_periph(AT91_PIO_PORTB, 17, 1); - } - if (cs_mask & (1 << 3)) { - at91_set_a_periph(AT91_PIO_PORTB, 18, 1); - } - if (cs_mask & (1 << 4)) { - at91_set_pio_output(AT91_PIO_PORTB, 15, 1); - } - if (cs_mask & (1 << 5)) { - at91_set_pio_output(AT91_PIO_PORTB, 16, 1); - } - if (cs_mask & (1 << 6)) { - at91_set_pio_output(AT91_PIO_PORTB, 17, 1); - } - if (cs_mask & (1 << 7)) { - at91_set_pio_output(AT91_PIO_PORTB, 18, 1); - } - -} -#endif - -#ifdef CONFIG_MACB -void at91_macb_hw_init(void) -{ - at91_set_a_periph(AT91_PIO_PORTB, 21, 0); /* ETXCK_EREFCK */ - at91_set_a_periph(AT91_PIO_PORTB, 22, 0); /* ERXDV */ - at91_set_a_periph(AT91_PIO_PORTB, 25, 0); /* ERX0 */ - at91_set_a_periph(AT91_PIO_PORTB, 26, 0); /* ERX1 */ - at91_set_a_periph(AT91_PIO_PORTB, 27, 0); /* ERXER */ - at91_set_a_periph(AT91_PIO_PORTB, 28, 0); /* ETXEN */ - at91_set_a_periph(AT91_PIO_PORTB, 23, 0); /* ETX0 */ - at91_set_a_periph(AT91_PIO_PORTB, 24, 0); /* ETX1 */ - at91_set_a_periph(AT91_PIO_PORTB, 30, 0); /* EMDIO */ - at91_set_a_periph(AT91_PIO_PORTB, 29, 0); /* EMDC */ - -#ifndef CONFIG_RMII - at91_set_b_periph(AT91_PIO_PORTC, 25, 0); /* ECRS */ - at91_set_b_periph(AT91_PIO_PORTC, 26, 0); /* ECOL */ - at91_set_b_periph(AT91_PIO_PORTC, 22, 0); /* ERX2 */ - at91_set_b_periph(AT91_PIO_PORTC, 23, 0); /* ERX3 */ - at91_set_b_periph(AT91_PIO_PORTC, 27, 0); /* ERXCK */ - at91_set_b_periph(AT91_PIO_PORTC, 20, 0); /* ETX2 */ - at91_set_b_periph(AT91_PIO_PORTC, 21, 0); /* ETX3 */ - at91_set_b_periph(AT91_PIO_PORTC, 24, 0); /* ETXER */ -#endif -} -#endif - -#ifdef CONFIG_AT91_CAN -void at91_can_hw_init(void) -{ - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; - - at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* CAN_TX */ - at91_set_a_periph(AT91_PIO_PORTA, 13, 1); /* CAN_RX */ - - /* Enable clock */ - writel(1 << AT91CAP9_ID_CAN, &pmc->pcer); -} -#endif diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c deleted file mode 100644 index efb53d673f..0000000000 --- a/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c +++ /dev/null @@ -1,245 +0,0 @@ -/* - * (C) Copyright 2007-2008 - * Stelian Pop <stelian@popies.net> - * Lead Tech Design <www.leadtechdesign.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <dm.h> -#include <asm/io.h> -#include <asm/arch/at91sam9260_matrix.h> -#include <asm/arch/at91_common.h> -#include <asm/arch/at91_pmc.h> -#include <asm/arch/at91sam9_sdramc.h> -#include <asm/arch/gpio.h> - -/* - * if CONFIG_AT91_GPIO_PULLUP ist set, keep pullups on on all - * peripheral pins. Good to have if hardware is soldered optionally - * or in case of SPI no slave is selected. Avoid lines to float - * needlessly. Use a short local PUP define. - * - * Due to errata "TXD floats when CTS is inactive" pullups are always - * on for TXD pins. - */ -#ifdef CONFIG_AT91_GPIO_PULLUP -# define PUP CONFIG_AT91_GPIO_PULLUP -#else -# define PUP 0 -#endif - -void at91_serial0_hw_init(void) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - at91_set_a_periph(AT91_PIO_PORTB, 4, 1); /* TXD0 */ - at91_set_a_periph(AT91_PIO_PORTB, 5, PUP); /* RXD0 */ - writel(1 << ATMEL_ID_USART0, &pmc->pcer); -} - -void at91_serial1_hw_init(void) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - at91_set_a_periph(AT91_PIO_PORTB, 6, 1); /* TXD1 */ - at91_set_a_periph(AT91_PIO_PORTB, 7, PUP); /* RXD1 */ - writel(1 << ATMEL_ID_USART1, &pmc->pcer); -} - -void at91_serial2_hw_init(void) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - at91_set_a_periph(AT91_PIO_PORTB, 8, 1); /* TXD2 */ - at91_set_a_periph(AT91_PIO_PORTB, 9, PUP); /* RXD2 */ - writel(1 << ATMEL_ID_USART2, &pmc->pcer); -} - -void at91_seriald_hw_init(void) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - at91_set_a_periph(AT91_PIO_PORTB, 14, PUP); /* DRXD */ - at91_set_a_periph(AT91_PIO_PORTB, 15, 1); /* DTXD */ - writel(1 << ATMEL_ID_SYS, &pmc->pcer); -} - -#if defined(CONFIG_HAS_DATAFLASH) || defined(CONFIG_ATMEL_SPI) -void at91_spi0_hw_init(unsigned long cs_mask) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - at91_set_a_periph(AT91_PIO_PORTA, 0, PUP); /* SPI0_MISO */ - at91_set_a_periph(AT91_PIO_PORTA, 1, PUP); /* SPI0_MOSI */ - at91_set_a_periph(AT91_PIO_PORTA, 2, PUP); /* SPI0_SPCK */ - - /* Enable clock */ - writel(1 << ATMEL_ID_SPI0, &pmc->pcer); - - if (cs_mask & (1 << 0)) { - at91_set_a_periph(AT91_PIO_PORTA, 3, 1); - } - if (cs_mask & (1 << 1)) { - at91_set_b_periph(AT91_PIO_PORTC, 11, 1); - } - if (cs_mask & (1 << 2)) { - at91_set_b_periph(AT91_PIO_PORTC, 16, 1); - } - if (cs_mask & (1 << 3)) { - at91_set_b_periph(AT91_PIO_PORTC, 17, 1); - } - if (cs_mask & (1 << 4)) { - at91_set_pio_output(AT91_PIO_PORTA, 3, 1); - } - if (cs_mask & (1 << 5)) { - at91_set_pio_output(AT91_PIO_PORTC, 11, 1); - } - if (cs_mask & (1 << 6)) { - at91_set_pio_output(AT91_PIO_PORTC, 16, 1); - } - if (cs_mask & (1 << 7)) { - at91_set_pio_output(AT91_PIO_PORTC, 17, 1); - } -} - -void at91_spi1_hw_init(unsigned long cs_mask) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - at91_set_a_periph(AT91_PIO_PORTB, 0, PUP); /* SPI1_MISO */ - at91_set_a_periph(AT91_PIO_PORTB, 1, PUP); /* SPI1_MOSI */ - at91_set_a_periph(AT91_PIO_PORTB, 2, PUP); /* SPI1_SPCK */ - - /* Enable clock */ - writel(1 << ATMEL_ID_SPI1, &pmc->pcer); - - if (cs_mask & (1 << 0)) { - at91_set_a_periph(AT91_PIO_PORTB, 3, 1); - } - if (cs_mask & (1 << 1)) { - at91_set_b_periph(AT91_PIO_PORTC, 5, 1); - } - if (cs_mask & (1 << 2)) { - at91_set_b_periph(AT91_PIO_PORTC, 4, 1); - } - if (cs_mask & (1 << 3)) { - at91_set_b_periph(AT91_PIO_PORTC, 3, 1); - } - if (cs_mask & (1 << 4)) { - at91_set_pio_output(AT91_PIO_PORTB, 3, 1); - } - if (cs_mask & (1 << 5)) { - at91_set_pio_output(AT91_PIO_PORTC, 5, 1); - } - if (cs_mask & (1 << 6)) { - at91_set_pio_output(AT91_PIO_PORTC, 4, 1); - } - if (cs_mask & (1 << 7)) { - at91_set_pio_output(AT91_PIO_PORTC, 3, 1); - } -} -#endif - -#ifdef CONFIG_MACB -void at91_macb_hw_init(void) -{ - /* Enable EMAC clock */ - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - writel(1 << ATMEL_ID_EMAC0, &pmc->pcer); - - at91_set_a_periph(AT91_PIO_PORTA, 19, 0); /* ETXCK_EREFCK */ - at91_set_a_periph(AT91_PIO_PORTA, 17, 0); /* ERXDV */ - at91_set_a_periph(AT91_PIO_PORTA, 14, 0); /* ERX0 */ - at91_set_a_periph(AT91_PIO_PORTA, 15, 0); /* ERX1 */ - at91_set_a_periph(AT91_PIO_PORTA, 18, 0); /* ERXER */ - at91_set_a_periph(AT91_PIO_PORTA, 16, 0); /* ETXEN */ - at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* ETX0 */ - at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* ETX1 */ - at91_set_a_periph(AT91_PIO_PORTA, 21, 0); /* EMDIO */ - at91_set_a_periph(AT91_PIO_PORTA, 20, 0); /* EMDC */ - -#ifndef CONFIG_RMII - at91_set_b_periph(AT91_PIO_PORTA, 28, 0); /* ECRS */ - at91_set_b_periph(AT91_PIO_PORTA, 29, 0); /* ECOL */ - at91_set_b_periph(AT91_PIO_PORTA, 25, 0); /* ERX2 */ - at91_set_b_periph(AT91_PIO_PORTA, 26, 0); /* ERX3 */ - at91_set_b_periph(AT91_PIO_PORTA, 27, 0); /* ERXCK */ -#if defined(CONFIG_AT91SAM9260EK) || defined(CONFIG_AFEB9260) - /* - * use PA10, PA11 for ETX2, ETX3. - * PA23 and PA24 are for TWI EEPROM - */ - at91_set_b_periph(AT91_PIO_PORTA, 10, 0); /* ETX2 */ - at91_set_b_periph(AT91_PIO_PORTA, 11, 0); /* ETX3 */ -#else - at91_set_b_periph(AT91_PIO_PORTA, 23, 0); /* ETX2 */ - at91_set_b_periph(AT91_PIO_PORTA, 24, 0); /* ETX3 */ -#if defined(CONFIG_AT91SAM9G20) - /* 9G20 BOOT ROM initializes those pins to multi-drive, undo that */ - at91_set_pio_multi_drive(AT91_PIO_PORTA, 23, 0); - at91_set_pio_multi_drive(AT91_PIO_PORTA, 24, 0); -#endif -#endif - at91_set_b_periph(AT91_PIO_PORTA, 22, 0); /* ETXER */ -#endif -} -#endif - -#if defined(CONFIG_GENERIC_ATMEL_MCI) -void at91_mci_hw_init(void) -{ - /* Enable mci clock */ - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - writel(1 << ATMEL_ID_MCI, &pmc->pcer); - - at91_set_a_periph(AT91_PIO_PORTA, 8, 1); /* MCCK */ -#if defined(CONFIG_ATMEL_MCI_PORTB) - at91_set_b_periph(AT91_PIO_PORTA, 1, 1); /* MCCDB */ - at91_set_b_periph(AT91_PIO_PORTA, 0, 1); /* MCDB0 */ - at91_set_b_periph(AT91_PIO_PORTA, 5, 1); /* MCDB1 */ - at91_set_b_periph(AT91_PIO_PORTA, 4, 1); /* MCDB2 */ - at91_set_b_periph(AT91_PIO_PORTA, 3, 1); /* MCDB3 */ -#else - at91_set_a_periph(AT91_PIO_PORTA, 7, 1); /* MCCDA */ - at91_set_a_periph(AT91_PIO_PORTA, 6, 1); /* MCDA0 */ - at91_set_a_periph(AT91_PIO_PORTA, 9, 1); /* MCDA1 */ - at91_set_a_periph(AT91_PIO_PORTA, 10, 1); /* MCDA2 */ - at91_set_a_periph(AT91_PIO_PORTA, 11, 1); /* MCDA3 */ -#endif -} -#endif - -void at91_sdram_hw_init(void) -{ - at91_set_a_periph(AT91_PIO_PORTC, 16, 0); - at91_set_a_periph(AT91_PIO_PORTC, 17, 0); - at91_set_a_periph(AT91_PIO_PORTC, 18, 0); - at91_set_a_periph(AT91_PIO_PORTC, 19, 0); - at91_set_a_periph(AT91_PIO_PORTC, 20, 0); - at91_set_a_periph(AT91_PIO_PORTC, 21, 0); - at91_set_a_periph(AT91_PIO_PORTC, 22, 0); - at91_set_a_periph(AT91_PIO_PORTC, 23, 0); - at91_set_a_periph(AT91_PIO_PORTC, 24, 0); - at91_set_a_periph(AT91_PIO_PORTC, 25, 0); - at91_set_a_periph(AT91_PIO_PORTC, 26, 0); - at91_set_a_periph(AT91_PIO_PORTC, 27, 0); - at91_set_a_periph(AT91_PIO_PORTC, 28, 0); - at91_set_a_periph(AT91_PIO_PORTC, 29, 0); - at91_set_a_periph(AT91_PIO_PORTC, 30, 0); - at91_set_a_periph(AT91_PIO_PORTC, 31, 0); -} - -/* Platform data for the GPIOs */ -static const struct at91_port_platdata at91sam9260_plat[] = { - { ATMEL_BASE_PIOA, "PA" }, - { ATMEL_BASE_PIOB, "PB" }, - { ATMEL_BASE_PIOC, "PC" }, -}; - -U_BOOT_DEVICES(at91sam9260_gpios) = { - { "gpio_at91", &at91sam9260_plat[0] }, - { "gpio_at91", &at91sam9260_plat[1] }, - { "gpio_at91", &at91sam9260_plat[2] }, -}; diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9261_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9261_devices.c deleted file mode 100644 index a445c7507e..0000000000 --- a/arch/arm/cpu/arm926ejs/at91/at91sam9261_devices.c +++ /dev/null @@ -1,140 +0,0 @@ -/* - * (C) Copyright 2007-2008 - * Stelian Pop <stelian@popies.net> - * Lead Tech Design <www.leadtechdesign.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/at91_common.h> -#include <asm/arch/at91_pmc.h> -#include <asm/arch/gpio.h> - -/* - * if CONFIG_AT91_GPIO_PULLUP ist set, keep pullups on on all - * peripheral pins. Good to have if hardware is soldered optionally - * or in case of SPI no slave is selected. Avoid lines to float - * needlessly. Use a short local PUP define. - * - * Due to errata "TXD floats when CTS is inactive" pullups are always - * on for TXD pins. - */ -#ifdef CONFIG_AT91_GPIO_PULLUP -# define PUP CONFIG_AT91_GPIO_PULLUP -#else -# define PUP 0 -#endif - -void at91_serial0_hw_init(void) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - at91_set_a_periph(AT91_PIO_PORTC, 8, 1); /* TXD0 */ - at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* RXD0 */ - writel(1 << ATMEL_ID_USART0, &pmc->pcer); -} - -void at91_serial1_hw_init(void) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - at91_set_a_periph(AT91_PIO_PORTC, 12, 1); /* TXD1 */ - at91_set_a_periph(AT91_PIO_PORTC, 13, 0); /* RXD1 */ - writel(1 << ATMEL_ID_USART1, &pmc->pcer); -} - -void at91_serial2_hw_init(void) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - at91_set_a_periph(AT91_PIO_PORTC, 14, 1); /* TXD2 */ - at91_set_a_periph(AT91_PIO_PORTC, 15, 0); /* RXD2 */ - writel(1 << ATMEL_ID_USART2, &pmc->pcer); -} - -void at91_seriald_hw_init(void) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - at91_set_a_periph(AT91_PIO_PORTA, 9, 0); /* DRXD */ - at91_set_a_periph(AT91_PIO_PORTA, 10, 1); /* DTXD */ - writel(1 << ATMEL_ID_SYS, &pmc->pcer); -} - -#if defined(CONFIG_HAS_DATAFLASH) || defined(CONFIG_ATMEL_SPI) -void at91_spi0_hw_init(unsigned long cs_mask) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - at91_set_a_periph(AT91_PIO_PORTA, 0, PUP); /* SPI0_MISO */ - at91_set_a_periph(AT91_PIO_PORTA, 1, PUP); /* SPI0_MOSI */ - at91_set_a_periph(AT91_PIO_PORTA, 2, PUP); /* SPI0_SPCK */ - - /* Enable clock */ - writel(1 << ATMEL_ID_SPI0, &pmc->pcer); - - if (cs_mask & (1 << 0)) { - at91_set_a_periph(AT91_PIO_PORTA, 3, 1); - } - if (cs_mask & (1 << 1)) { - at91_set_a_periph(AT91_PIO_PORTA, 4, 1); - } - if (cs_mask & (1 << 2)) { - at91_set_a_periph(AT91_PIO_PORTA, 5, 1); - } - if (cs_mask & (1 << 3)) { - at91_set_a_periph(AT91_PIO_PORTA, 6, 1); - } - if (cs_mask & (1 << 4)) { - at91_set_pio_output(AT91_PIO_PORTA, 3, 1); - } - if (cs_mask & (1 << 5)) { - at91_set_pio_output(AT91_PIO_PORTA, 4, 1); - } - if (cs_mask & (1 << 6)) { - at91_set_pio_output(AT91_PIO_PORTA, 5, 1); - } - if (cs_mask & (1 << 7)) { - at91_set_pio_output(AT91_PIO_PORTA, 6, 1); - } -} - -void at91_spi1_hw_init(unsigned long cs_mask) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - at91_set_a_periph(AT91_PIO_PORTB, 30, PUP); /* SPI1_MISO */ - at91_set_a_periph(AT91_PIO_PORTB, 31, PUP); /* SPI1_MOSI */ - at91_set_a_periph(AT91_PIO_PORTB, 29, PUP); /* SPI1_SPCK */ - - /* Enable clock */ - writel(1 << ATMEL_ID_SPI1, &pmc->pcer); - - if (cs_mask & (1 << 0)) { - at91_set_a_periph(AT91_PIO_PORTB, 28, 1); - } - if (cs_mask & (1 << 1)) { - at91_set_b_periph(AT91_PIO_PORTA, 24, 1); - } - if (cs_mask & (1 << 2)) { - at91_set_b_periph(AT91_PIO_PORTA, 25, 1); - } - if (cs_mask & (1 << 3)) { - at91_set_a_periph(AT91_PIO_PORTA, 26, 1); - } - if (cs_mask & (1 << 4)) { - at91_set_pio_output(AT91_PIO_PORTB, 28, 1); - } - if (cs_mask & (1 << 5)) { - at91_set_pio_output(AT91_PIO_PORTA, 24, 1); - } - if (cs_mask & (1 << 6)) { - at91_set_pio_output(AT91_PIO_PORTA, 25, 1); - } - if (cs_mask & (1 << 7)) { - at91_set_pio_output(AT91_PIO_PORTA, 26, 1); - } -} -#endif diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c deleted file mode 100644 index 6b51d5f355..0000000000 --- a/arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c +++ /dev/null @@ -1,218 +0,0 @@ -/* - * (C) Copyright 2007-2008 - * Stelian Pop <stelian@popies.net> - * Lead Tech Design <www.leadtechdesign.com> - * - * (C) Copyright 2009-2011 - * Daniel Gorsulowski <daniel.gorsulowski@esd.eu> - * esd electronic system design gmbh <www.esd.eu> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/at91_common.h> -#include <asm/arch/at91_pmc.h> -#include <asm/arch/gpio.h> - -/* - * if CONFIG_AT91_GPIO_PULLUP ist set, keep pullups on on all - * peripheral pins. Good to have if hardware is soldered optionally - * or in case of SPI no slave is selected. Avoid lines to float - * needlessly. Use a short local PUP define. - * - * Due to errata "TXD floats when CTS is inactive" pullups are always - * on for TXD pins. - */ -#ifdef CONFIG_AT91_GPIO_PULLUP -# define PUP CONFIG_AT91_GPIO_PULLUP -#else -# define PUP 0 -#endif - -void at91_serial0_hw_init(void) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - at91_set_a_periph(AT91_PIO_PORTA, 26, 1); /* TXD0 */ - at91_set_a_periph(AT91_PIO_PORTA, 27, PUP); /* RXD0 */ - writel(1 << ATMEL_ID_USART0, &pmc->pcer); -} - -void at91_serial1_hw_init(void) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - at91_set_a_periph(AT91_PIO_PORTD, 0, 1); /* TXD1 */ - at91_set_a_periph(AT91_PIO_PORTD, 1, PUP); /* RXD1 */ - writel(1 << ATMEL_ID_USART1, &pmc->pcer); -} - -void at91_serial2_hw_init(void) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - at91_set_a_periph(AT91_PIO_PORTD, 2, 1); /* TXD2 */ - at91_set_a_periph(AT91_PIO_PORTD, 3, PUP); /* RXD2 */ - writel(1 << ATMEL_ID_USART2, &pmc->pcer); -} - -void at91_seriald_hw_init(void) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - at91_set_a_periph(AT91_PIO_PORTC, 30, PUP); /* DRXD */ - at91_set_a_periph(AT91_PIO_PORTC, 31, 1); /* DTXD */ - writel(1 << ATMEL_ID_SYS, &pmc->pcer); -} - -#if defined(CONFIG_HAS_DATAFLASH) || defined(CONFIG_ATMEL_SPI) -void at91_spi0_hw_init(unsigned long cs_mask) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - at91_set_b_periph(AT91_PIO_PORTA, 0, PUP); /* SPI0_MISO */ - at91_set_b_periph(AT91_PIO_PORTA, 1, PUP); /* SPI0_MOSI */ - at91_set_b_periph(AT91_PIO_PORTA, 2, PUP); /* SPI0_SPCK */ - - /* Enable clock */ - writel(1 << ATMEL_ID_SPI0, &pmc->pcer); - - if (cs_mask & (1 << 0)) { - at91_set_b_periph(AT91_PIO_PORTA, 5, 1); - } - if (cs_mask & (1 << 1)) { - at91_set_b_periph(AT91_PIO_PORTA, 3, 1); - } - if (cs_mask & (1 << 2)) { - at91_set_b_periph(AT91_PIO_PORTA, 4, 1); - } - if (cs_mask & (1 << 3)) { - at91_set_b_periph(AT91_PIO_PORTB, 11, 1); - } - if (cs_mask & (1 << 4)) { - at91_set_pio_output(AT91_PIO_PORTA, 5, 1); - } - if (cs_mask & (1 << 5)) { - at91_set_pio_output(AT91_PIO_PORTA, 3, 1); - } - if (cs_mask & (1 << 6)) { - at91_set_pio_output(AT91_PIO_PORTA, 4, 1); - } - if (cs_mask & (1 << 7)) { - at91_set_pio_output(AT91_PIO_PORTB, 11, 1); - } -} - -void at91_spi1_hw_init(unsigned long cs_mask) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - at91_set_a_periph(AT91_PIO_PORTB, 12, PUP); /* SPI1_MISO */ - at91_set_a_periph(AT91_PIO_PORTB, 13, PUP); /* SPI1_MOSI */ - at91_set_a_periph(AT91_PIO_PORTB, 14, PUP); /* SPI1_SPCK */ - - /* Enable clock */ - writel(1 << ATMEL_ID_SPI1, &pmc->pcer); - - if (cs_mask & (1 << 0)) { - at91_set_a_periph(AT91_PIO_PORTB, 15, 1); - } - if (cs_mask & (1 << 1)) { - at91_set_a_periph(AT91_PIO_PORTB, 16, 1); - } - if (cs_mask & (1 << 2)) { - at91_set_a_periph(AT91_PIO_PORTB, 17, 1); - } - if (cs_mask & (1 << 3)) { - at91_set_a_periph(AT91_PIO_PORTB, 18, 1); - } - if (cs_mask & (1 << 4)) { - at91_set_pio_output(AT91_PIO_PORTB, 15, 1); - } - if (cs_mask & (1 << 5)) { - at91_set_pio_output(AT91_PIO_PORTB, 16, 1); - } - if (cs_mask & (1 << 6)) { - at91_set_pio_output(AT91_PIO_PORTB, 17, 1); - } - if (cs_mask & (1 << 7)) { - at91_set_pio_output(AT91_PIO_PORTB, 18, 1); - } -} -#endif - -#if defined(CONFIG_GENERIC_ATMEL_MCI) -void at91_mci_hw_init(void) -{ - /* Enable mci clock */ - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - writel(1 << ATMEL_ID_MCI1, &pmc->pcer); - - at91_set_a_periph(AT91_PIO_PORTA, 6, PUP); /* MCI1_CK */ - -#if defined(CONFIG_ATMEL_MCI_PORTB) - at91_set_a_periph(AT91_PIO_PORTA, 21, PUP); /* MCI1_CDB */ - at91_set_a_periph(AT91_PIO_PORTA, 22, PUP); /* MCI1_DB0 */ - at91_set_a_periph(AT91_PIO_PORTA, 23, PUP); /* MCI1_DB1 */ - at91_set_a_periph(AT91_PIO_PORTA, 24, PUP); /* MCI1_DB2 */ - at91_set_a_periph(AT91_PIO_PORTA, 25, PUP); /* MCI1_DB3 */ -#else - at91_set_a_periph(AT91_PIO_PORTA, 7, PUP); /* MCI1_CDA */ - at91_set_a_periph(AT91_PIO_PORTA, 8, PUP); /* MCI1_DA0 */ - at91_set_a_periph(AT91_PIO_PORTA, 9, PUP); /* MCI1_DA1 */ - at91_set_a_periph(AT91_PIO_PORTA, 10, PUP); /* MCI1_DA2 */ - at91_set_a_periph(AT91_PIO_PORTA, 11, PUP); /* MCI1_DA3 */ -#endif -} -#endif - -#ifdef CONFIG_MACB -void at91_macb_hw_init(void) -{ - at91_set_a_periph(AT91_PIO_PORTE, 21, 0); /* ETXCK_EREFCK */ - at91_set_b_periph(AT91_PIO_PORTC, 25, 0); /* ERXDV */ - at91_set_a_periph(AT91_PIO_PORTE, 25, 0); /* ERX0 */ - at91_set_a_periph(AT91_PIO_PORTE, 26, 0); /* ERX1 */ - at91_set_a_periph(AT91_PIO_PORTE, 27, 0); /* ERXER */ - at91_set_a_periph(AT91_PIO_PORTE, 28, 0); /* ETXEN */ - at91_set_a_periph(AT91_PIO_PORTE, 23, 0); /* ETX0 */ - at91_set_a_periph(AT91_PIO_PORTE, 24, 0); /* ETX1 */ - at91_set_a_periph(AT91_PIO_PORTE, 30, 0); /* EMDIO */ - at91_set_a_periph(AT91_PIO_PORTE, 29, 0); /* EMDC */ - -#ifndef CONFIG_RMII - at91_set_a_periph(AT91_PIO_PORTE, 22, 0); /* ECRS */ - at91_set_b_periph(AT91_PIO_PORTC, 26, 0); /* ECOL */ - at91_set_b_periph(AT91_PIO_PORTC, 22, 0); /* ERX2 */ - at91_set_b_periph(AT91_PIO_PORTC, 23, 0); /* ERX3 */ - at91_set_b_periph(AT91_PIO_PORTC, 27, 0); /* ERXCK */ - at91_set_b_periph(AT91_PIO_PORTC, 20, 0); /* ETX2 */ - at91_set_b_periph(AT91_PIO_PORTC, 21, 0); /* ETX3 */ - at91_set_b_periph(AT91_PIO_PORTC, 24, 0); /* ETXER */ -#endif -} -#endif - -#ifdef CONFIG_USB_OHCI_NEW -void at91_uhp_hw_init(void) -{ - /* Enable VBus on UHP ports */ - at91_set_pio_output(AT91_PIO_PORTA, 21, 0); - at91_set_pio_output(AT91_PIO_PORTA, 24, 0); -} -#endif - -#ifdef CONFIG_AT91_CAN -void at91_can_hw_init(void) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* CAN_TX */ - at91_set_a_periph(AT91_PIO_PORTA, 14, 1); /* CAN_RX */ - - /* Enable clock */ - writel(1 << ATMEL_ID_CAN, &pmc->pcer); -} -#endif diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c deleted file mode 100644 index 0e6c0da1bd..0000000000 --- a/arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c +++ /dev/null @@ -1,184 +0,0 @@ -/* - * (C) Copyright 2007-2008 - * Stelian Pop <stelian@popies.net> - * Lead Tech Design <www.leadtechdesign.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/arch/at91_common.h> -#include <asm/arch/at91_pmc.h> -#include <asm/arch/gpio.h> -#include <asm/io.h> - -/* - * if CONFIG_AT91_GPIO_PULLUP ist set, keep pullups on on all - * peripheral pins. Good to have if hardware is soldered optionally - * or in case of SPI no slave is selected. Avoid lines to float - * needlessly. Use a short local PUP define. - * - * Due to errata "TXD floats when CTS is inactive" pullups are always - * on for TXD pins. - */ -#ifdef CONFIG_AT91_GPIO_PULLUP -# define PUP CONFIG_AT91_GPIO_PULLUP -#else -# define PUP 0 -#endif - -void at91_serial0_hw_init(void) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - at91_set_a_periph(AT91_PIO_PORTB, 19, 1); /* TXD0 */ - at91_set_a_periph(AT91_PIO_PORTB, 18, PUP); /* RXD0 */ - writel(1 << ATMEL_ID_USART0, &pmc->pcer); -} - -void at91_serial1_hw_init(void) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - at91_set_a_periph(AT91_PIO_PORTB, 4, 1); /* TXD1 */ - at91_set_a_periph(AT91_PIO_PORTB, 5, PUP); /* RXD1 */ - writel(1 << ATMEL_ID_USART1, &pmc->pcer); -} - -void at91_serial2_hw_init(void) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - at91_set_a_periph(AT91_PIO_PORTD, 6, 1); /* TXD2 */ - at91_set_a_periph(AT91_PIO_PORTD, 7, PUP); /* RXD2 */ - writel(1 << ATMEL_ID_USART2, &pmc->pcer); -} - -void at91_seriald_hw_init(void) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - at91_set_a_periph(AT91_PIO_PORTB, 12, 0); /* DRXD */ - at91_set_a_periph(AT91_PIO_PORTB, 13, 1); /* DTXD */ - writel(1 << ATMEL_ID_SYS, &pmc->pcer); -} - -#if defined(CONFIG_HAS_DATAFLASH) || defined(CONFIG_ATMEL_SPI) -void at91_spi0_hw_init(unsigned long cs_mask) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - at91_set_a_periph(AT91_PIO_PORTB, 0, PUP); /* SPI0_MISO */ - at91_set_a_periph(AT91_PIO_PORTB, 1, PUP); /* SPI0_MOSI */ - at91_set_a_periph(AT91_PIO_PORTB, 2, PUP); /* SPI0_SPCK */ - - /* Enable clock */ - writel(1 << ATMEL_ID_SPI0, &pmc->pcer); - - if (cs_mask & (1 << 0)) { - at91_set_a_periph(AT91_PIO_PORTB, 3, 1); - } - if (cs_mask & (1 << 1)) { - at91_set_b_periph(AT91_PIO_PORTB, 18, 1); - } - if (cs_mask & (1 << 2)) { - at91_set_b_periph(AT91_PIO_PORTB, 19, 1); - } - if (cs_mask & (1 << 3)) { - at91_set_b_periph(AT91_PIO_PORTD, 27, 1); - } - if (cs_mask & (1 << 4)) { - at91_set_pio_output(AT91_PIO_PORTB, 3, 1); - } - if (cs_mask & (1 << 5)) { - at91_set_pio_output(AT91_PIO_PORTB, 18, 1); - } - if (cs_mask & (1 << 6)) { - at91_set_pio_output(AT91_PIO_PORTB, 19, 1); - } - if (cs_mask & (1 << 7)) { - at91_set_pio_output(AT91_PIO_PORTD, 27, 1); - } -} - -void at91_spi1_hw_init(unsigned long cs_mask) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - at91_set_a_periph(AT91_PIO_PORTB, 14, PUP); /* SPI1_MISO */ - at91_set_a_periph(AT91_PIO_PORTB, 15, PUP); /* SPI1_MOSI */ - at91_set_a_periph(AT91_PIO_PORTB, 16, PUP); /* SPI1_SPCK */ - - /* Enable clock */ - writel(1 << ATMEL_ID_SPI1, &pmc->pcer); - - if (cs_mask & (1 << 0)) { - at91_set_a_periph(AT91_PIO_PORTB, 17, 1); - } - if (cs_mask & (1 << 1)) { - at91_set_b_periph(AT91_PIO_PORTD, 28, 1); - } - if (cs_mask & (1 << 2)) { - at91_set_a_periph(AT91_PIO_PORTD, 18, 1); - } - if (cs_mask & (1 << 3)) { - at91_set_a_periph(AT91_PIO_PORTD, 19, 1); - } - if (cs_mask & (1 << 4)) { - at91_set_pio_output(AT91_PIO_PORTB, 17, 1); - } - if (cs_mask & (1 << 5)) { - at91_set_pio_output(AT91_PIO_PORTD, 28, 1); - } - if (cs_mask & (1 << 6)) { - at91_set_pio_output(AT91_PIO_PORTD, 18, 1); - } - if (cs_mask & (1 << 7)) { - at91_set_pio_output(AT91_PIO_PORTD, 19, 1); - } - -} -#endif - -#ifdef CONFIG_MACB -void at91_macb_hw_init(void) -{ - at91_set_a_periph(AT91_PIO_PORTA, 17, 0); /* ETXCK_EREFCK */ - at91_set_a_periph(AT91_PIO_PORTA, 15, 0); /* ERXDV */ - at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* ERX0 */ - at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* ERX1 */ - at91_set_a_periph(AT91_PIO_PORTA, 16, 0); /* ERXER */ - at91_set_a_periph(AT91_PIO_PORTA, 14, 0); /* ETXEN */ - at91_set_a_periph(AT91_PIO_PORTA, 10, 0); /* ETX0 */ - at91_set_a_periph(AT91_PIO_PORTA, 11, 0); /* ETX1 */ - at91_set_a_periph(AT91_PIO_PORTA, 19, 0); /* EMDIO */ - at91_set_a_periph(AT91_PIO_PORTA, 18, 0); /* EMDC */ -#ifndef CONFIG_RMII - at91_set_b_periph(AT91_PIO_PORTA, 29, 0); /* ECRS */ - at91_set_b_periph(AT91_PIO_PORTA, 30, 0); /* ECOL */ - at91_set_b_periph(AT91_PIO_PORTA, 8, 0); /* ERX2 */ - at91_set_b_periph(AT91_PIO_PORTA, 9, 0); /* ERX3 */ - at91_set_b_periph(AT91_PIO_PORTA, 28, 0); /* ERXCK */ - at91_set_b_periph(AT91_PIO_PORTA, 6, 0); /* ETX2 */ - at91_set_b_periph(AT91_PIO_PORTA, 7, 0); /* ETX3 */ - at91_set_b_periph(AT91_PIO_PORTA, 27, 0); /* ETXER */ -#endif -} -#endif - -#ifdef CONFIG_GENERIC_ATMEL_MCI -void at91_mci_hw_init(void) -{ - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - - at91_set_a_periph(AT91_PIO_PORTA, 0, 0); /* MCI0 CLK */ - at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* MCI0 CDA */ - at91_set_a_periph(AT91_PIO_PORTA, 2, 0); /* MCI0 DA0 */ - at91_set_a_periph(AT91_PIO_PORTA, 3, 0); /* MCI0 DA1 */ - at91_set_a_periph(AT91_PIO_PORTA, 4, 0); /* MCI0 DA2 */ - at91_set_a_periph(AT91_PIO_PORTA, 5, 0); /* MCI0 DA3 */ - - /* Enable clock */ - writel(1 << ATMEL_ID_MCI0, &pmc->pcer); -} -#endif diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9n12_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9n12_devices.c deleted file mode 100644 index 39f17a1e11..0000000000 --- a/arch/arm/cpu/arm926ejs/at91/at91sam9n12_devices.c +++ /dev/null @@ -1,161 +0,0 @@ -/* - * (C) Copyright 2013 Atmel Corporation - * Josh Wu <josh.wu@atmel.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/at91_common.h> -#include <asm/arch/at91_pmc.h> -#include <asm/arch/at91_pio.h> - -unsigned int has_lcdc() -{ - return 1; -} - -void at91_serial0_hw_init(void) -{ - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - - at91_set_a_periph(AT91_PIO_PORTA, 0, 1); /* TXD0 */ - at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* RXD0 */ - writel(1 << ATMEL_ID_USART0, &pmc->pcer); -} - -void at91_serial1_hw_init(void) -{ - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - - at91_set_a_periph(AT91_PIO_PORTA, 5, 1); /* TXD1 */ - at91_set_a_periph(AT91_PIO_PORTA, 6, 0); /* RXD1 */ - writel(1 << ATMEL_ID_USART1, &pmc->pcer); -} - -void at91_serial2_hw_init(void) -{ - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - - at91_set_a_periph(AT91_PIO_PORTA, 7, 1); /* TXD2 */ - at91_set_a_periph(AT91_PIO_PORTA, 8, 0); /* RXD2 */ - writel(1 << ATMEL_ID_USART2, &pmc->pcer); -} - -void at91_serial3_hw_init(void) -{ - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - - at91_set_b_periph(AT91_PIO_PORTC, 22, 1); /* TXD3 */ - at91_set_b_periph(AT91_PIO_PORTC, 23, 0); /* RXD3 */ - writel(1 << ATMEL_ID_USART3, &pmc->pcer); -} - -void at91_seriald_hw_init(void) -{ - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - - at91_set_a_periph(AT91_PIO_PORTA, 10, 1); /* DTXD */ - at91_set_a_periph(AT91_PIO_PORTA, 9, 0); /* DRXD */ - writel(1 << ATMEL_ID_SYS, &pmc->pcer); -} - -#ifdef CONFIG_ATMEL_SPI -void at91_spi0_hw_init(unsigned long cs_mask) -{ - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - - at91_set_a_periph(AT91_PIO_PORTA, 11, 0); /* SPI0_MISO */ - at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* SPI0_MOSI */ - at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* SPI0_SPCK */ - - /* Enable clock */ - writel(1 << ATMEL_ID_SPI0, &pmc->pcer); - - if (cs_mask & (1 << 0)) - at91_set_pio_output(AT91_PIO_PORTA, 14, 1); - if (cs_mask & (1 << 1)) - at91_set_pio_output(AT91_PIO_PORTA, 7, 1); - if (cs_mask & (1 << 2)) - at91_set_pio_output(AT91_PIO_PORTA, 1, 1); - if (cs_mask & (1 << 3)) - at91_set_pio_output(AT91_PIO_PORTB, 3, 1); -} - -void at91_spi1_hw_init(unsigned long cs_mask) -{ - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - - at91_set_b_periph(AT91_PIO_PORTA, 21, 0); /* SPI1_MISO */ - at91_set_b_periph(AT91_PIO_PORTA, 22, 0); /* SPI1_MOSI */ - at91_set_b_periph(AT91_PIO_PORTA, 23, 0); /* SPI1_SPCK */ - - /* Enable clock */ - writel(1 << ATMEL_ID_SPI1, &pmc->pcer); - - if (cs_mask & (1 << 0)) - at91_set_pio_output(AT91_PIO_PORTA, 8, 1); - if (cs_mask & (1 << 1)) - at91_set_pio_output(AT91_PIO_PORTA, 0, 1); - if (cs_mask & (1 << 2)) - at91_set_pio_output(AT91_PIO_PORTA, 31, 1); - if (cs_mask & (1 << 3)) - at91_set_pio_output(AT91_PIO_PORTA, 30, 1); -} -#endif - -void at91_mci_hw_init(void) -{ - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - - at91_set_a_periph(AT91_PIO_PORTA, 17, 0); /* MCCK */ - at91_set_a_periph(AT91_PIO_PORTA, 16, 0); /* MCCDA */ - at91_set_a_periph(AT91_PIO_PORTA, 15, 0); /* MCDA0 */ - at91_set_a_periph(AT91_PIO_PORTA, 18, 0); /* MCDA1 */ - at91_set_a_periph(AT91_PIO_PORTA, 19, 0); /* MCDA2 */ - at91_set_a_periph(AT91_PIO_PORTA, 20, 0); /* MCDA3 */ - - writel(1 << ATMEL_ID_HSMCI0, &pmc->pcer); -} - -#ifdef CONFIG_LCD -void at91_lcd_hw_init(void) -{ - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - - at91_set_a_periph(AT91_PIO_PORTC, 24, 0); /* LCDDPWR */ - at91_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDVSYNC */ - at91_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDHSYNC */ - at91_set_a_periph(AT91_PIO_PORTC, 28, 0); /* LCDDOTCK */ - at91_set_a_periph(AT91_PIO_PORTC, 29, 0); /* LCDDEN */ - at91_set_a_periph(AT91_PIO_PORTC, 30, 0); /* LCDDOTCK */ - - at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* LCDD0 */ - at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* LCDD1 */ - at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* LCDD2 */ - at91_set_a_periph(AT91_PIO_PORTC, 3, 0); /* LCDD3 */ - at91_set_a_periph(AT91_PIO_PORTC, 4, 0); /* LCDD4 */ - at91_set_a_periph(AT91_PIO_PORTC, 5, 0); /* LCDD5 */ - at91_set_a_periph(AT91_PIO_PORTC, 6, 0); /* LCDD6 */ - at91_set_a_periph(AT91_PIO_PORTC, 7, 0); /* LCDD7 */ - at91_set_a_periph(AT91_PIO_PORTC, 8, 0); /* LCDD8 */ - at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* LCDD9 */ - at91_set_a_periph(AT91_PIO_PORTC, 10, 0); /* LCDD10 */ - at91_set_a_periph(AT91_PIO_PORTC, 11, 0); /* LCDD11 */ - at91_set_a_periph(AT91_PIO_PORTC, 12, 0); /* LCDD12 */ - at91_set_a_periph(AT91_PIO_PORTC, 13, 0); /* LCDD13 */ - at91_set_a_periph(AT91_PIO_PORTC, 14, 0); /* LCDD14 */ - at91_set_a_periph(AT91_PIO_PORTC, 15, 0); /* LCDD15 */ - at91_set_a_periph(AT91_PIO_PORTC, 16, 0); /* LCDD16 */ - at91_set_a_periph(AT91_PIO_PORTC, 17, 0); /* LCDD17 */ - at91_set_a_periph(AT91_PIO_PORTC, 18, 0); /* LCDD18 */ - at91_set_a_periph(AT91_PIO_PORTC, 19, 0); /* LCDD19 */ - at91_set_a_periph(AT91_PIO_PORTC, 20, 0); /* LCDD20 */ - at91_set_a_periph(AT91_PIO_PORTC, 21, 0); /* LCDD21 */ - at91_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDD22 */ - at91_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDD23 */ - - writel(1 << ATMEL_ID_LCDC, &pmc->pcer); -} -#endif diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9rl_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9rl_devices.c deleted file mode 100644 index 0ec32c3ab9..0000000000 --- a/arch/arm/cpu/arm926ejs/at91/at91sam9rl_devices.c +++ /dev/null @@ -1,103 +0,0 @@ -/* - * (C) Copyright 2007-2008 - * Stelian Pop <stelian@popies.net> - * Lead Tech Design <www.leadtechdesign.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/at91_common.h> -#include <asm/arch/at91_pmc.h> -#include <asm/arch/gpio.h> - -/* - * if CONFIG_AT91_GPIO_PULLUP ist set, keep pullups on on all - * peripheral pins. Good to have if hardware is soldered optionally - * or in case of SPI no slave is selected. Avoid lines to float - * needlessly. Use a short local PUP define. - * - * Due to errata "TXD floats when CTS is inactive" pullups are always - * on for TXD pins. - */ -#ifdef CONFIG_AT91_GPIO_PULLUP -# define PUP CONFIG_AT91_GPIO_PULLUP -#else -# define PUP 0 -#endif - -void at91_serial0_hw_init(void) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - at91_set_a_periph(AT91_PIO_PORTA, 6, 1); /* TXD0 */ - at91_set_a_periph(AT91_PIO_PORTA, 7, PUP); /* RXD0 */ - writel(1 << ATMEL_ID_USART0, &pmc->pcer); -} - -void at91_serial1_hw_init(void) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - at91_set_a_periph(AT91_PIO_PORTA, 11, 1); /* TXD1 */ - at91_set_a_periph(AT91_PIO_PORTA, 12, PUP); /* RXD1 */ - writel(1 << ATMEL_ID_USART1, &pmc->pcer); -} - -void at91_serial2_hw_init(void) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - at91_set_a_periph(AT91_PIO_PORTA, 13, 1); /* TXD2 */ - at91_set_a_periph(AT91_PIO_PORTA, 14, PUP); /* RXD2 */ - writel(1 << ATMEL_ID_USART2, &pmc->pcer); -} - -void at91_seriald_hw_init(void) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - at91_set_a_periph(AT91_PIO_PORTA, 21, PUP); /* DRXD */ - at91_set_a_periph(AT91_PIO_PORTA, 22, 1); /* DTXD */ - writel(1 << ATMEL_ID_SYS, &pmc->pcer); -} - -#if defined(CONFIG_HAS_DATAFLASH) || defined(CONFIG_ATMEL_SPI) -void at91_spi0_hw_init(unsigned long cs_mask) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - at91_set_a_periph(AT91_PIO_PORTA, 25, PUP); /* SPI0_MISO */ - at91_set_a_periph(AT91_PIO_PORTA, 26, PUP); /* SPI0_MOSI */ - at91_set_a_periph(AT91_PIO_PORTA, 27, PUP); /* SPI0_SPCK */ - - /* Enable clock */ - writel(1 << ATMEL_ID_SPI, &pmc->pcer); - - if (cs_mask & (1 << 0)) { - at91_set_a_periph(AT91_PIO_PORTA, 28, 1); - } - if (cs_mask & (1 << 1)) { - at91_set_b_periph(AT91_PIO_PORTB, 7, 1); - } - if (cs_mask & (1 << 2)) { - at91_set_a_periph(AT91_PIO_PORTD, 8, 1); - } - if (cs_mask & (1 << 3)) { - at91_set_b_periph(AT91_PIO_PORTD, 9, 1); - } - if (cs_mask & (1 << 4)) { - at91_set_pio_output(AT91_PIO_PORTA, 28, 1); - } - if (cs_mask & (1 << 5)) { - at91_set_pio_output(AT91_PIO_PORTB, 7, 1); - } - if (cs_mask & (1 << 6)) { - at91_set_pio_output(AT91_PIO_PORTD, 8, 1); - } - if (cs_mask & (1 << 7)) { - at91_set_pio_output(AT91_PIO_PORTD, 9, 1); - } -} -#endif diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c deleted file mode 100644 index 6d94572237..0000000000 --- a/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c +++ /dev/null @@ -1,244 +0,0 @@ -/* - * Copyright (C) 2012 Atmel Corporation - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/arch/at91_common.h> -#include <asm/arch/at91_pmc.h> -#include <asm/arch/gpio.h> -#include <asm/io.h> - -unsigned int get_chip_id(void) -{ - /* The 0x40 is the offset of cidr in DBGU */ - return readl(ATMEL_BASE_DBGU + 0x40) & ~ARCH_ID_VERSION_MASK; -} - -unsigned int get_extension_chip_id(void) -{ - /* The 0x44 is the offset of exid in DBGU */ - return readl(ATMEL_BASE_DBGU + 0x44); -} - -unsigned int has_emac1() -{ - return cpu_is_at91sam9x25(); -} - -unsigned int has_emac0() -{ - return !(cpu_is_at91sam9g15()); -} - -unsigned int has_lcdc() -{ - return cpu_is_at91sam9g15() || cpu_is_at91sam9g35() - || cpu_is_at91sam9x35(); -} - -char *get_cpu_name() -{ - unsigned int extension_id = get_extension_chip_id(); - - if (cpu_is_at91sam9x5()) { - switch (extension_id) { - case ARCH_EXID_AT91SAM9G15: - return "AT91SAM9G15"; - case ARCH_EXID_AT91SAM9G25: - return "AT91SAM9G25"; - case ARCH_EXID_AT91SAM9G35: - return "AT91SAM9G35"; - case ARCH_EXID_AT91SAM9X25: - return "AT91SAM9X25"; - case ARCH_EXID_AT91SAM9X35: - return "AT91SAM9X35"; - default: - return "Unknown CPU type"; - } - } else { - return "Unknown CPU type"; - } -} - -void at91_seriald_hw_init(void) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - at91_set_a_periph(AT91_PIO_PORTA, 9, 0); /* DRXD */ - at91_set_a_periph(AT91_PIO_PORTA, 10, 1); /* DTXD */ - - writel(1 << ATMEL_ID_SYS, &pmc->pcer); -} - -void at91_serial0_hw_init(void) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - at91_set_a_periph(AT91_PIO_PORTA, 0, 1); /* TXD */ - at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* RXD */ - - writel(1 << ATMEL_ID_USART0, &pmc->pcer); -} - -void at91_serial1_hw_init(void) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - at91_set_a_periph(AT91_PIO_PORTA, 5, 1); /* TXD */ - at91_set_a_periph(AT91_PIO_PORTA, 6, 0); /* RXD */ - - writel(1 << ATMEL_ID_USART1, &pmc->pcer); -} - -void at91_serial2_hw_init(void) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - at91_set_a_periph(AT91_PIO_PORTA, 7, 1); /* TXD */ - at91_set_a_periph(AT91_PIO_PORTA, 8, 0); /* RXD */ - - writel(1 << ATMEL_ID_USART2, &pmc->pcer); -} - -void at91_mci_hw_init(void) -{ - /* Initialize the MCI0 */ - at91_set_a_periph(AT91_PIO_PORTA, 17, 1); /* MCCK */ - at91_set_a_periph(AT91_PIO_PORTA, 16, 1); /* MCCDA */ - at91_set_a_periph(AT91_PIO_PORTA, 15, 1); /* MCDA0 */ - at91_set_a_periph(AT91_PIO_PORTA, 18, 1); /* MCDA1 */ - at91_set_a_periph(AT91_PIO_PORTA, 19, 1); /* MCDA2 */ - at91_set_a_periph(AT91_PIO_PORTA, 20, 1); /* MCDA3 */ - - /* Enable clock for MCI0 */ - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - writel(1 << ATMEL_ID_HSMCI0, &pmc->pcer); -} - -#ifdef CONFIG_ATMEL_SPI -void at91_spi0_hw_init(unsigned long cs_mask) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - at91_set_a_periph(AT91_PIO_PORTA, 11, 0); /* SPI0_MISO */ - at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* SPI0_MOSI */ - at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* SPI0_SPCK */ - - /* Enable clock */ - writel(1 << ATMEL_ID_SPI0, &pmc->pcer); - - if (cs_mask & (1 << 0)) - at91_set_a_periph(AT91_PIO_PORTA, 14, 0); - if (cs_mask & (1 << 1)) - at91_set_b_periph(AT91_PIO_PORTA, 7, 0); - if (cs_mask & (1 << 2)) - at91_set_b_periph(AT91_PIO_PORTA, 1, 0); - if (cs_mask & (1 << 3)) - at91_set_b_periph(AT91_PIO_PORTB, 3, 0); - if (cs_mask & (1 << 4)) - at91_set_pio_output(AT91_PIO_PORTA, 14, 0); - if (cs_mask & (1 << 5)) - at91_set_pio_output(AT91_PIO_PORTA, 7, 0); - if (cs_mask & (1 << 6)) - at91_set_pio_output(AT91_PIO_PORTA, 1, 0); - if (cs_mask & (1 << 7)) - at91_set_pio_output(AT91_PIO_PORTB, 3, 0); -} - -void at91_spi1_hw_init(unsigned long cs_mask) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - at91_set_b_periph(AT91_PIO_PORTA, 21, 0); /* SPI1_MISO */ - at91_set_b_periph(AT91_PIO_PORTA, 22, 0); /* SPI1_MOSI */ - at91_set_b_periph(AT91_PIO_PORTA, 23, 0); /* SPI1_SPCK */ - - /* Enable clock */ - writel(1 << ATMEL_ID_SPI1, &pmc->pcer); - - if (cs_mask & (1 << 0)) - at91_set_b_periph(AT91_PIO_PORTA, 8, 0); - if (cs_mask & (1 << 1)) - at91_set_b_periph(AT91_PIO_PORTA, 0, 0); - if (cs_mask & (1 << 2)) - at91_set_b_periph(AT91_PIO_PORTA, 31, 0); - if (cs_mask & (1 << 3)) - at91_set_b_periph(AT91_PIO_PORTA, 30, 0); - if (cs_mask & (1 << 4)) - at91_set_pio_output(AT91_PIO_PORTA, 8, 0); - if (cs_mask & (1 << 5)) - at91_set_pio_output(AT91_PIO_PORTA, 0, 0); - if (cs_mask & (1 << 6)) - at91_set_pio_output(AT91_PIO_PORTA, 31, 0); - if (cs_mask & (1 << 7)) - at91_set_pio_output(AT91_PIO_PORTA, 30, 0); -} -#endif - -#if defined(CONFIG_USB_OHCI_NEW) || defined(CONFIG_USB_EHCI) -void at91_uhp_hw_init(void) -{ - /* Enable VBus on UHP ports */ - at91_set_pio_output(AT91_PIO_PORTD, 18, 0); /* port A */ - at91_set_pio_output(AT91_PIO_PORTD, 19, 0); /* port B */ -#if defined(CONFIG_USB_OHCI_NEW) - /* port C is OHCI only */ - at91_set_pio_output(AT91_PIO_PORTD, 20, 0); /* port C */ -#endif -} -#endif - -#ifdef CONFIG_MACB -void at91_macb_hw_init(void) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - if (has_emac0()) { - /* Enable EMAC0 clock */ - writel(1 << ATMEL_ID_EMAC0, &pmc->pcer); - /* EMAC0 pins setup */ - at91_set_a_periph(AT91_PIO_PORTB, 4, 0); /* ETXCK */ - at91_set_a_periph(AT91_PIO_PORTB, 3, 0); /* ERXDV */ - at91_set_a_periph(AT91_PIO_PORTB, 0, 0); /* ERX0 */ - at91_set_a_periph(AT91_PIO_PORTB, 1, 0); /* ERX1 */ - at91_set_a_periph(AT91_PIO_PORTB, 2, 0); /* ERXER */ - at91_set_a_periph(AT91_PIO_PORTB, 7, 0); /* ETXEN */ - at91_set_a_periph(AT91_PIO_PORTB, 9, 0); /* ETX0 */ - at91_set_a_periph(AT91_PIO_PORTB, 10, 0); /* ETX1 */ - at91_set_a_periph(AT91_PIO_PORTB, 5, 0); /* EMDIO */ - at91_set_a_periph(AT91_PIO_PORTB, 6, 0); /* EMDC */ - } - - if (has_emac1()) { - /* Enable EMAC1 clock */ - writel(1 << ATMEL_ID_EMAC1, &pmc->pcer); - /* EMAC1 pins setup */ - at91_set_b_periph(AT91_PIO_PORTC, 29, 0); /* ETXCK */ - at91_set_b_periph(AT91_PIO_PORTC, 28, 0); /* ECRSDV */ - at91_set_b_periph(AT91_PIO_PORTC, 20, 0); /* ERXO */ - at91_set_b_periph(AT91_PIO_PORTC, 21, 0); /* ERX1 */ - at91_set_b_periph(AT91_PIO_PORTC, 16, 0); /* ERXER */ - at91_set_b_periph(AT91_PIO_PORTC, 27, 0); /* ETXEN */ - at91_set_b_periph(AT91_PIO_PORTC, 18, 0); /* ETX0 */ - at91_set_b_periph(AT91_PIO_PORTC, 19, 0); /* ETX1 */ - at91_set_b_periph(AT91_PIO_PORTC, 31, 0); /* EMDIO */ - at91_set_b_periph(AT91_PIO_PORTC, 30, 0); /* EMDC */ - } - -#ifndef CONFIG_RMII - /* Only emac0 support MII */ - if (has_emac0()) { - at91_set_a_periph(AT91_PIO_PORTB, 16, 0); /* ECRS */ - at91_set_a_periph(AT91_PIO_PORTB, 17, 0); /* ECOL */ - at91_set_a_periph(AT91_PIO_PORTB, 13, 0); /* ERX2 */ - at91_set_a_periph(AT91_PIO_PORTB, 14, 0); /* ERX3 */ - at91_set_a_periph(AT91_PIO_PORTB, 15, 0); /* ERXCK */ - at91_set_a_periph(AT91_PIO_PORTB, 11, 0); /* ETX2 */ - at91_set_a_periph(AT91_PIO_PORTB, 12, 0); /* ETX3 */ - at91_set_a_periph(AT91_PIO_PORTB, 8, 0); /* ETXER */ - } -#endif -} -#endif diff --git a/arch/arm/cpu/arm926ejs/at91/clock.c b/arch/arm/cpu/arm926ejs/at91/clock.c deleted file mode 100644 index f363982d03..0000000000 --- a/arch/arm/cpu/arm926ejs/at91/clock.c +++ /dev/null @@ -1,249 +0,0 @@ -/* - * [origin: Linux kernel linux/arch/arm/mach-at91/clock.c] - * - * Copyright (C) 2005 David Brownell - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/hardware.h> -#include <asm/arch/at91_pmc.h> -#include <asm/arch/clk.h> - -#if !defined(CONFIG_AT91FAMILY) -# error You need to define CONFIG_AT91FAMILY in your board config! -#endif - -DECLARE_GLOBAL_DATA_PTR; - -static unsigned long at91_css_to_rate(unsigned long css) -{ - switch (css) { - case AT91_PMC_MCKR_CSS_SLOW: - return CONFIG_SYS_AT91_SLOW_CLOCK; - case AT91_PMC_MCKR_CSS_MAIN: - return gd->arch.main_clk_rate_hz; - case AT91_PMC_MCKR_CSS_PLLA: - return gd->arch.plla_rate_hz; - case AT91_PMC_MCKR_CSS_PLLB: - return gd->arch.pllb_rate_hz; - } - - return 0; -} - -#ifdef CONFIG_USB_ATMEL -static unsigned at91_pll_calc(unsigned main_freq, unsigned out_freq) -{ - unsigned i, div = 0, mul = 0, diff = 1 << 30; - unsigned ret = (out_freq > 155000000) ? 0xbe00 : 0x3e00; - - /* PLL output max 240 MHz (or 180 MHz per errata) */ - if (out_freq > 240000000) - goto fail; - - for (i = 1; i < 256; i++) { - int diff1; - unsigned input, mul1; - - /* - * PLL input between 1MHz and 32MHz per spec, but lower - * frequences seem necessary in some cases so allow 100K. - * Warning: some newer products need 2MHz min. - */ - input = main_freq / i; -#if defined(CONFIG_AT91SAM9G20) - if (input < 2000000) - continue; -#endif - if (input < 100000) - continue; - if (input > 32000000) - continue; - - mul1 = out_freq / input; -#if defined(CONFIG_AT91SAM9G20) - if (mul > 63) - continue; -#endif - if (mul1 > 2048) - continue; - if (mul1 < 2) - goto fail; - - diff1 = out_freq - input * mul1; - if (diff1 < 0) - diff1 = -diff1; - if (diff > diff1) { - diff = diff1; - div = i; - mul = mul1; - if (diff == 0) - break; - } - } - if (i == 256 && diff > (out_freq >> 5)) - goto fail; - return ret | ((mul - 1) << 16) | div; -fail: - return 0; -} -#endif - -static u32 at91_pll_rate(u32 freq, u32 reg) -{ - unsigned mul, div; - - div = reg & 0xff; - mul = (reg >> 16) & 0x7ff; - if (div && mul) { - freq /= div; - freq *= mul + 1; - } else - freq = 0; - - return freq; -} - -int at91_clock_init(unsigned long main_clock) -{ - unsigned freq, mckr; - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; -#ifndef CONFIG_SYS_AT91_MAIN_CLOCK - unsigned tmp; - /* - * When the bootloader initialized the main oscillator correctly, - * there's no problem using the cycle counter. But if it didn't, - * or when using oscillator bypass mode, we must be told the speed - * of the main clock. - */ - if (!main_clock) { - do { - tmp = readl(&pmc->mcfr); - } while (!(tmp & AT91_PMC_MCFR_MAINRDY)); - tmp &= AT91_PMC_MCFR_MAINF_MASK; - main_clock = tmp * (CONFIG_SYS_AT91_SLOW_CLOCK / 16); - } -#endif - gd->arch.main_clk_rate_hz = main_clock; - - /* report if PLLA is more than mildly overclocked */ - gd->arch.plla_rate_hz = at91_pll_rate(main_clock, readl(&pmc->pllar)); - -#ifdef CONFIG_USB_ATMEL - /* - * USB clock init: choose 48 MHz PLLB value, - * disable 48MHz clock during usb peripheral suspend. - * - * REVISIT: assumes MCK doesn't derive from PLLB! - */ - gd->arch.at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | - AT91_PMC_PLLBR_USBDIV_2; - gd->arch.pllb_rate_hz = at91_pll_rate(main_clock, - gd->arch.at91_pllb_usb_init); -#endif - - /* - * MCK and CPU derive from one of those primary clocks. - * For now, assume this parentage won't change. - */ - mckr = readl(&pmc->mckr); -#if defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) \ - || defined(CONFIG_AT91SAM9N12) || defined(CONFIG_AT91SAM9X5) - /* plla divisor by 2 */ - gd->arch.plla_rate_hz /= (1 << ((mckr & 1 << 12) >> 12)); -#endif - gd->arch.mck_rate_hz = at91_css_to_rate(mckr & AT91_PMC_MCKR_CSS_MASK); - freq = gd->arch.mck_rate_hz; - - freq /= (1 << ((mckr & AT91_PMC_MCKR_PRES_MASK) >> 2)); /* prescale */ -#if defined(CONFIG_AT91SAM9G20) - /* mdiv ; (x >> 7) = ((x >> 8) * 2) */ - gd->arch.mck_rate_hz = (mckr & AT91_PMC_MCKR_MDIV_MASK) ? - freq / ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 7) : freq; - if (mckr & AT91_PMC_MCKR_MDIV_MASK) - freq /= 2; /* processor clock division */ -#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) \ - || defined(CONFIG_AT91SAM9N12) || defined(CONFIG_AT91SAM9X5) - /* mdiv <==> divisor - * 0 <==> 1 - * 1 <==> 2 - * 2 <==> 4 - * 3 <==> 3 - */ - gd->arch.mck_rate_hz = (mckr & AT91_PMC_MCKR_MDIV_MASK) == - (AT91_PMC_MCKR_MDIV_2 | AT91_PMC_MCKR_MDIV_4) - ? freq / 3 - : freq / (1 << ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 8)); -#else - gd->arch.mck_rate_hz = freq / - (1 << ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 8)); -#endif - gd->arch.cpu_clk_rate_hz = freq; - - return 0; -} - -#if !defined(AT91_PLL_LOCK_TIMEOUT) -#define AT91_PLL_LOCK_TIMEOUT 1000000 -#endif - -void at91_plla_init(u32 pllar) -{ - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - int timeout = AT91_PLL_LOCK_TIMEOUT; - - writel(pllar, &pmc->pllar); - while (!(readl(&pmc->sr) & (AT91_PMC_LOCKA | AT91_PMC_MCKRDY))) { - timeout--; - if (timeout == 0) - break; - } -} -void at91_pllb_init(u32 pllbr) -{ - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - int timeout = AT91_PLL_LOCK_TIMEOUT; - - writel(pllbr, &pmc->pllbr); - while (!(readl(&pmc->sr) & (AT91_PMC_LOCKB | AT91_PMC_MCKRDY))) { - timeout--; - if (timeout == 0) - break; - } -} - -void at91_mck_init(u32 mckr) -{ - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - int timeout = AT91_PLL_LOCK_TIMEOUT; - u32 tmp; - - tmp = readl(&pmc->mckr); - tmp &= ~(AT91_PMC_MCKR_PRES_MASK | - AT91_PMC_MCKR_MDIV_MASK | - AT91_PMC_MCKR_PLLADIV_MASK | - AT91_PMC_MCKR_CSS_MASK); - tmp |= mckr & (AT91_PMC_MCKR_PRES_MASK | - AT91_PMC_MCKR_MDIV_MASK | - AT91_PMC_MCKR_PLLADIV_MASK | - AT91_PMC_MCKR_CSS_MASK); - writel(tmp, &pmc->mckr); - - while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY)) { - timeout--; - if (timeout == 0) - break; - } -} - -void at91_periph_clk_enable(int id) -{ - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - - writel(1 << id, &pmc->pcer); -} diff --git a/arch/arm/cpu/arm926ejs/at91/config.mk b/arch/arm/cpu/arm926ejs/at91/config.mk deleted file mode 100644 index 370630d4de..0000000000 --- a/arch/arm/cpu/arm926ejs/at91/config.mk +++ /dev/null @@ -1,2 +0,0 @@ -PF_CPPFLAGS_TUNE := $(call cc-option,-mtune=arm926ejs,) -PLATFORM_CPPFLAGS += $(PF_CPPFLAGS_TUNE) diff --git a/arch/arm/cpu/arm926ejs/at91/cpu.c b/arch/arm/cpu/arm926ejs/at91/cpu.c deleted file mode 100644 index da1d35907e..0000000000 --- a/arch/arm/cpu/arm926ejs/at91/cpu.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * (C) Copyright 2010 - * Reinhard Meyer, reinhard.meyer@emk-elektronik.de - * (C) Copyright 2009 - * Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/hardware.h> -#include <asm/arch/at91_pmc.h> -#include <asm/arch/at91_pit.h> -#include <asm/arch/at91_gpbr.h> -#include <asm/arch/clk.h> - -#ifndef CONFIG_SYS_AT91_MAIN_CLOCK -#define CONFIG_SYS_AT91_MAIN_CLOCK 0 -#endif - -int arch_cpu_init(void) -{ - return at91_clock_init(CONFIG_SYS_AT91_MAIN_CLOCK); -} - -void arch_preboot_os(void) -{ - ulong cpiv; - at91_pit_t *pit = (at91_pit_t *) ATMEL_BASE_PIT; - - cpiv = AT91_PIT_MR_PIV_MASK(readl(&pit->piir)); - - /* - * Disable PITC - * Add 0x1000 to current counter to stop it faster - * without waiting for wrapping back to 0 - */ - writel(cpiv + 0x1000, &pit->mr); -} - -#if defined(CONFIG_DISPLAY_CPUINFO) -int print_cpuinfo(void) -{ - char buf[32]; - - printf("CPU: %s\n", ATMEL_CPU_NAME); - printf("Crystal frequency: %8s MHz\n", - strmhz(buf, get_main_clk_rate())); - printf("CPU clock : %8s MHz\n", - strmhz(buf, get_cpu_clk_rate())); - printf("Master clock : %8s MHz\n", - strmhz(buf, get_mck_clk_rate())); - - return 0; -} -#endif diff --git a/arch/arm/cpu/arm926ejs/at91/eflash.c b/arch/arm/cpu/arm926ejs/at91/eflash.c deleted file mode 100644 index 3f39264289..0000000000 --- a/arch/arm/cpu/arm926ejs/at91/eflash.c +++ /dev/null @@ -1,254 +0,0 @@ -/* - * (C) Copyright 2010 - * Reinhard Meyer, EMK Elektronik, reinhard.meyer@emk-elektronik.de - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * this driver supports the enhanced embedded flash in the Atmel - * AT91SAM9XE devices with the following geometry: - * - * AT91SAM9XE128: 1 plane of 8 regions of 32 pages (total 256 pages) - * AT91SAM9XE256: 1 plane of 16 regions of 32 pages (total 512 pages) - * AT91SAM9XE512: 1 plane of 32 regions of 32 pages (total 1024 pages) - * (the exact geometry is read from the flash at runtime, so any - * future devices should already be covered) - * - * Regions can be write/erase protected. - * Whole (!) pages can be individually written with erase on the fly. - * Writing partial pages will corrupt the rest of the page. - * - * The flash is presented to u-boot with each region being a sector, - * having the following effects: - * Each sector can be hardware protected (protect on/off). - * Each page in a sector can be rewritten anytime. - * Since pages are erased when written, the "erase" does nothing. - * The first "CONFIG_EFLASH_PROTSECTORS" cannot be unprotected - * by u-Boot commands. - * - * Note: Redundant environment will not work in this flash since - * it does use partial page writes. Make sure the environment spans - * whole pages! - */ - -/* - * optional TODOs (nice to have features): - * - * make the driver coexist with other NOR flash drivers - * (use an index into flash_info[], requires work - * in those other drivers, too) - * Make the erase command fill the sectors with 0xff - * (if the flashes grow larger in the future and - * someone puts a jffs2 into them) - * do a read-modify-write for partially programmed pages - */ -#include <common.h> -#include <asm/io.h> -#include <asm/arch/hardware.h> -#include <asm/arch/at91_common.h> -#include <asm/arch/at91_eefc.h> -#include <asm/arch/at91_dbu.h> - -/* checks to detect configuration errors */ -#if CONFIG_SYS_MAX_FLASH_BANKS!=1 -#error eflash: this driver can only handle 1 bank -#endif - -/* global structure */ -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; -static u32 pagesize; - -unsigned long flash_init (void) -{ - at91_eefc_t *eefc = (at91_eefc_t *) ATMEL_BASE_EEFC; - at91_dbu_t *dbu = (at91_dbu_t *) ATMEL_BASE_DBGU; - u32 id, size, nplanes, planesize, nlocks; - u32 addr, i, tmp=0; - - debug("eflash: init\n"); - - flash_info[0].flash_id = FLASH_UNKNOWN; - - /* check if its an AT91ARM9XE SoC */ - if ((readl(&dbu->cidr) & AT91_DBU_CID_ARCH_MASK) != AT91_DBU_CID_ARCH_9XExx) { - puts("eflash: not an AT91SAM9XE\n"); - return 0; - } - - /* now query the eflash for its structure */ - writel(AT91_EEFC_FCR_KEY | AT91_EEFC_FCR_FCMD_GETD, &eefc->fcr); - while ((readl(&eefc->fsr) & AT91_EEFC_FSR_FRDY) == 0) - ; - id = readl(&eefc->frr); /* word 0 */ - size = readl(&eefc->frr); /* word 1 */ - pagesize = readl(&eefc->frr); /* word 2 */ - nplanes = readl(&eefc->frr); /* word 3 */ - planesize = readl(&eefc->frr); /* word 4 */ - debug("id=%08x size=%u pagesize=%u planes=%u planesize=%u\n", - id, size, pagesize, nplanes, planesize); - for (i=1; i<nplanes; i++) { - tmp = readl(&eefc->frr); /* words 5..4+nplanes-1 */ - }; - nlocks = readl(&eefc->frr); /* word 4+nplanes */ - debug("nlocks=%u\n", nlocks); - /* since we are going to use the lock regions as sectors, check count */ - if (nlocks > CONFIG_SYS_MAX_FLASH_SECT) { - printf("eflash: number of lock regions(%u) "\ - "> CONFIG_SYS_MAX_FLASH_SECT. reducing...\n", - nlocks); - nlocks = CONFIG_SYS_MAX_FLASH_SECT; - } - flash_info[0].size = size; - flash_info[0].sector_count = nlocks; - flash_info[0].flash_id = id; - - addr = ATMEL_BASE_FLASH; - for (i=0; i<nlocks; i++) { - tmp = readl(&eefc->frr); /* words 4+nplanes+1.. */ - flash_info[0].start[i] = addr; - flash_info[0].protect[i] = 0; - addr += tmp; - }; - - /* now read the protection information for all regions */ - writel(AT91_EEFC_FCR_KEY | AT91_EEFC_FCR_FCMD_GLB, &eefc->fcr); - while ((readl(&eefc->fsr) & AT91_EEFC_FSR_FRDY) == 0) - ; - for (i=0; i<flash_info[0].sector_count; i++) { - if (i%32 == 0) - tmp = readl(&eefc->frr); - flash_info[0].protect[i] = (tmp >> (i%32)) & 1; -#if defined(CONFIG_EFLASH_PROTSECTORS) - if (i < CONFIG_EFLASH_PROTSECTORS) - flash_info[0].protect[i] = 1; -#endif - } - - return size; -} - -void flash_print_info (flash_info_t *info) -{ - int i; - - puts("AT91SAM9XE embedded flash\n Size: "); - print_size(info->size, " in "); - printf("%d Sectors\n", info->sector_count); - - printf(" Sector Start Addresses:"); - for (i=0; i<info->sector_count; ++i) { - if ((i % 5) == 0) - printf("\n "); - printf(" %08lX%s", - info->start[i], - info->protect[i] ? " (RO)" : " " - ); - } - printf ("\n"); - return; -} - -int flash_real_protect (flash_info_t *info, long sector, int prot) -{ - at91_eefc_t *eefc = (at91_eefc_t *) ATMEL_BASE_EEFC; - u32 pagenum = (info->start[sector]-ATMEL_BASE_FLASH)/pagesize; - u32 i, tmp=0; - - debug("protect sector=%ld prot=%d\n", sector, prot); - -#if defined(CONFIG_EFLASH_PROTSECTORS) - if (sector < CONFIG_EFLASH_PROTSECTORS) { - if (!prot) { - printf("eflash: sector %lu cannot be unprotected\n", - sector); - } - return 1; /* return anyway, caller does not care for result */ - } -#endif - if (prot) { - writel(AT91_EEFC_FCR_KEY | AT91_EEFC_FCR_FCMD_SLB | - (pagenum << AT91_EEFC_FCR_FARG_SHIFT), &eefc->fcr); - } else { - writel(AT91_EEFC_FCR_KEY | AT91_EEFC_FCR_FCMD_CLB | - (pagenum << AT91_EEFC_FCR_FARG_SHIFT), &eefc->fcr); - } - while ((readl(&eefc->fsr) & AT91_EEFC_FSR_FRDY) == 0) - ; - /* now re-read the protection information for all regions */ - writel(AT91_EEFC_FCR_KEY | AT91_EEFC_FCR_FCMD_GLB, &eefc->fcr); - while ((readl(&eefc->fsr) & AT91_EEFC_FSR_FRDY) == 0) - ; - for (i=0; i<info->sector_count; i++) { - if (i%32 == 0) - tmp = readl(&eefc->frr); - info->protect[i] = (tmp >> (i%32)) & 1; - } - return 0; -} - -static u32 erase_write_page (u32 pagenum) -{ - at91_eefc_t *eefc = (at91_eefc_t *) ATMEL_BASE_EEFC; - - debug("erase+write page=%u\n", pagenum); - - /* give erase and write page command */ - writel(AT91_EEFC_FCR_KEY | AT91_EEFC_FCR_FCMD_EWP | - (pagenum << AT91_EEFC_FCR_FARG_SHIFT), &eefc->fcr); - while ((readl(&eefc->fsr) & AT91_EEFC_FSR_FRDY) == 0) - ; - /* return status */ - return readl(&eefc->fsr) - & (AT91_EEFC_FSR_FCMDE | AT91_EEFC_FSR_FLOCKE); -} - -int flash_erase (flash_info_t *info, int s_first, int s_last) -{ - debug("erase first=%d last=%d\n", s_first, s_last); - puts("this flash does not need and support erasing!\n"); - return 0; -} - -/* - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - */ - -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - u32 pagenum; - u32 *src32, *dst32; - u32 i; - - debug("write src=%08lx addr=%08lx cnt=%lx\n", - (ulong)src, addr, cnt); - - /* REQUIRE addr to be on a page start, abort if not */ - if (addr % pagesize) { - printf ("eflash: start %08lx is not on page start\n"\ - " write aborted\n", addr); - return 1; - } - - /* now start copying data */ - pagenum = (addr-ATMEL_BASE_FLASH)/pagesize; - src32 = (u32 *) src; - dst32 = (u32 *) addr; - while (cnt > 0) { - i = pagesize / 4; - /* fill page buffer */ - while (i--) - *dst32++ = *src32++; - /* write page */ - if (erase_write_page(pagenum)) - return 1; - pagenum++; - if (cnt > pagesize) - cnt -= pagesize; - else - cnt = 0; - } - return 0; -} diff --git a/arch/arm/cpu/arm926ejs/at91/led.c b/arch/arm/cpu/arm926ejs/at91/led.c deleted file mode 100644 index b8d5c785df..0000000000 --- a/arch/arm/cpu/arm926ejs/at91/led.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * (C) Copyright 2007-2008 - * Stelian Pop <stelian@popies.net> - * Lead Tech Design <www.leadtechdesign.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/gpio.h> -#include <asm/arch/gpio.h> -#include <status_led.h> - -#ifdef CONFIG_RED_LED -void red_led_on(void) -{ - gpio_set_value(CONFIG_RED_LED, 1); -} - -void red_led_off(void) -{ - gpio_set_value(CONFIG_RED_LED, 0); -} -#endif - -#ifdef CONFIG_GREEN_LED -void green_led_on(void) -{ - gpio_set_value(CONFIG_GREEN_LED, 0); -} - -void green_led_off(void) -{ - gpio_set_value(CONFIG_GREEN_LED, 1); -} -#endif - -#ifdef CONFIG_YELLOW_LED -void yellow_led_on(void) -{ - gpio_set_value(CONFIG_YELLOW_LED, 0); -} - -void yellow_led_off(void) -{ - gpio_set_value(CONFIG_YELLOW_LED, 1); -} -#endif diff --git a/arch/arm/cpu/arm926ejs/at91/lowlevel_init.S b/arch/arm/cpu/arm926ejs/at91/lowlevel_init.S deleted file mode 100644 index a9ec81a75c..0000000000 --- a/arch/arm/cpu/arm926ejs/at91/lowlevel_init.S +++ /dev/null @@ -1,246 +0,0 @@ -/* - * Memory Setup stuff - taken from blob memsetup.S - * - * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and - * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) - * - * Copyright (C) 2008 Ronetix Ilko Iliev (www.ronetix.at) - * Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <config.h> -#include <asm/arch/hardware.h> -#include <asm/arch/at91_pmc.h> -#include <asm/arch/at91_wdt.h> -#include <asm/arch/at91_pio.h> -#include <asm/arch/at91_matrix.h> -#include <asm/arch/at91sam9_sdramc.h> -#include <asm/arch/at91sam9_smc.h> -#include <asm/arch/at91_rstc.h> -#ifdef CONFIG_ATMEL_LEGACY -#include <asm/arch/at91sam9_matrix.h> -#endif -#ifndef CONFIG_SYS_MATRIX_EBICSA_VAL -#define CONFIG_SYS_MATRIX_EBICSA_VAL CONFIG_SYS_MATRIX_EBI0CSA_VAL -#endif - -.globl lowlevel_init -.type lowlevel_init,function -lowlevel_init: - -POS1: - adr r5, POS1 /* r5 = POS1 run time */ - ldr r0, =POS1 /* r0 = POS1 compile */ - sub r5, r5, r0 /* r0 = CONFIG_SYS_TEXT_BASE-1 */ - - /* memory control configuration 1 */ - ldr r0, =SMRDATA - ldr r2, =SMRDATA1 - add r0, r0, r5 - add r2, r2, r5 -0: - /* the address */ - ldr r1, [r0], #4 - /* the value */ - ldr r3, [r0], #4 - str r3, [r1] - cmp r2, r0 - bne 0b - -/* ---------------------------------------------------------------------------- - * PMC Init Step 1. - * ---------------------------------------------------------------------------- - * - Check if the PLL is already initialized - * ---------------------------------------------------------------------------- - */ - ldr r1, =(AT91_ASM_PMC_MCKR) - ldr r0, [r1] - and r0, r0, #3 - cmp r0, #0 - bne PLL_setup_end - -/* --------------------------------------------------------------------------- - * - Enable the Main Oscillator - * --------------------------------------------------------------------------- - */ - ldr r1, =(AT91_ASM_PMC_MOR) - ldr r2, =(AT91_ASM_PMC_SR) - /* Main oscillator Enable register PMC_MOR: */ - ldr r0, =CONFIG_SYS_MOR_VAL - str r0, [r1] - - /* Reading the PMC Status to detect when the Main Oscillator is enabled */ - mov r4, #AT91_PMC_IXR_MOSCS -MOSCS_Loop: - ldr r3, [r2] - and r3, r4, r3 - cmp r3, #AT91_PMC_IXR_MOSCS - bne MOSCS_Loop - -/* ---------------------------------------------------------------------------- - * PMC Init Step 2. - * ---------------------------------------------------------------------------- - * Setup PLLA - * ---------------------------------------------------------------------------- - */ - ldr r1, =(AT91_ASM_PMC_PLLAR) - ldr r0, =CONFIG_SYS_PLLAR_VAL - str r0, [r1] - - /* Reading the PMC Status register to detect when the PLLA is locked */ - mov r4, #AT91_PMC_IXR_LOCKA -MOSCS_Loop1: - ldr r3, [r2] - and r3, r4, r3 - cmp r3, #AT91_PMC_IXR_LOCKA - bne MOSCS_Loop1 - -/* ---------------------------------------------------------------------------- - * PMC Init Step 3. - * ---------------------------------------------------------------------------- - * - Switch on the Main Oscillator - * ---------------------------------------------------------------------------- - */ - ldr r1, =(AT91_ASM_PMC_MCKR) - - /* -Master Clock Controller register PMC_MCKR */ - ldr r0, =CONFIG_SYS_MCKR1_VAL - str r0, [r1] - - /* Reading the PMC Status to detect when the Master clock is ready */ - mov r4, #AT91_PMC_IXR_MCKRDY -MCKRDY_Loop: - ldr r3, [r2] - and r3, r4, r3 - cmp r3, #AT91_PMC_IXR_MCKRDY - bne MCKRDY_Loop - - ldr r0, =CONFIG_SYS_MCKR2_VAL - str r0, [r1] - - /* Reading the PMC Status to detect when the Master clock is ready */ - mov r4, #AT91_PMC_IXR_MCKRDY -MCKRDY_Loop1: - ldr r3, [r2] - and r3, r4, r3 - cmp r3, #AT91_PMC_IXR_MCKRDY - bne MCKRDY_Loop1 -PLL_setup_end: - -/* ---------------------------------------------------------------------------- - * - memory control configuration 2 - * ---------------------------------------------------------------------------- - */ - ldr r0, =(AT91_ASM_SDRAMC_TR) - ldr r1, [r0] - cmp r1, #0 - bne SDRAM_setup_end - - ldr r0, =SMRDATA1 - ldr r2, =SMRDATA2 - add r0, r0, r5 - add r2, r2, r5 -2: - /* the address */ - ldr r1, [r0], #4 - /* the value */ - ldr r3, [r0], #4 - str r3, [r1] - cmp r2, r0 - bne 2b - -SDRAM_setup_end: - /* everything is fine now */ - mov pc, lr - - .ltorg - -SMRDATA: - .word AT91_ASM_WDT_MR - .word CONFIG_SYS_WDTC_WDMR_VAL - /* configure PIOx as EBI0 D[16-31] */ -#if defined(CONFIG_AT91SAM9263) - .word AT91_ASM_PIOD_PDR - .word CONFIG_SYS_PIOD_PDR_VAL1 - .word AT91_ASM_PIOD_PUDR - .word CONFIG_SYS_PIOD_PPUDR_VAL - .word AT91_ASM_PIOD_ASR - .word CONFIG_SYS_PIOD_PPUDR_VAL -#elif defined(CONFIG_AT91SAM9260) || defined(CONFIG_AT91SAM9261) \ - || defined(CONFIG_AT91SAM9G20) - .word AT91_ASM_PIOC_PDR - .word CONFIG_SYS_PIOC_PDR_VAL1 - .word AT91_ASM_PIOC_PUDR - .word CONFIG_SYS_PIOC_PPUDR_VAL -#endif - .word AT91_ASM_MATRIX_CSA0 - .word CONFIG_SYS_MATRIX_EBICSA_VAL - - /* flash */ - .word AT91_ASM_SMC_MODE0 - .word CONFIG_SYS_SMC0_MODE0_VAL - - .word AT91_ASM_SMC_CYCLE0 - .word CONFIG_SYS_SMC0_CYCLE0_VAL - - .word AT91_ASM_SMC_PULSE0 - .word CONFIG_SYS_SMC0_PULSE0_VAL - - .word AT91_ASM_SMC_SETUP0 - .word CONFIG_SYS_SMC0_SETUP0_VAL - -SMRDATA1: - .word AT91_ASM_SDRAMC_MR - .word CONFIG_SYS_SDRC_MR_VAL1 - .word AT91_ASM_SDRAMC_TR - .word CONFIG_SYS_SDRC_TR_VAL1 - .word AT91_ASM_SDRAMC_CR - .word CONFIG_SYS_SDRC_CR_VAL - .word AT91_ASM_SDRAMC_MDR - .word CONFIG_SYS_SDRC_MDR_VAL - .word AT91_ASM_SDRAMC_MR - .word CONFIG_SYS_SDRC_MR_VAL2 - .word CONFIG_SYS_SDRAM_BASE - .word CONFIG_SYS_SDRAM_VAL1 - .word AT91_ASM_SDRAMC_MR - .word CONFIG_SYS_SDRC_MR_VAL3 - .word CONFIG_SYS_SDRAM_BASE - .word CONFIG_SYS_SDRAM_VAL2 - .word CONFIG_SYS_SDRAM_BASE - .word CONFIG_SYS_SDRAM_VAL3 - .word CONFIG_SYS_SDRAM_BASE - .word CONFIG_SYS_SDRAM_VAL4 - .word CONFIG_SYS_SDRAM_BASE - .word CONFIG_SYS_SDRAM_VAL5 - .word CONFIG_SYS_SDRAM_BASE - .word CONFIG_SYS_SDRAM_VAL6 - .word CONFIG_SYS_SDRAM_BASE - .word CONFIG_SYS_SDRAM_VAL7 - .word CONFIG_SYS_SDRAM_BASE - .word CONFIG_SYS_SDRAM_VAL8 - .word CONFIG_SYS_SDRAM_BASE - .word CONFIG_SYS_SDRAM_VAL9 - .word AT91_ASM_SDRAMC_MR - .word CONFIG_SYS_SDRC_MR_VAL4 - .word CONFIG_SYS_SDRAM_BASE - .word CONFIG_SYS_SDRAM_VAL10 - .word AT91_ASM_SDRAMC_MR - .word CONFIG_SYS_SDRC_MR_VAL5 - .word CONFIG_SYS_SDRAM_BASE - .word CONFIG_SYS_SDRAM_VAL11 - .word AT91_ASM_SDRAMC_TR - .word CONFIG_SYS_SDRC_TR_VAL2 - .word CONFIG_SYS_SDRAM_BASE - .word CONFIG_SYS_SDRAM_VAL12 - /* User reset enable*/ - .word AT91_ASM_RSTC_MR - .word CONFIG_SYS_RSTC_RMR_VAL -#ifdef CONFIG_SYS_MATRIX_MCFG_REMAP - /* MATRIX_MCFG - REMAP all masters */ - .word AT91_ASM_MATRIX_MCFG - .word 0x1FF -#endif -SMRDATA2: - .word 0 diff --git a/arch/arm/cpu/arm926ejs/at91/reset.c b/arch/arm/cpu/arm926ejs/at91/reset.c deleted file mode 100644 index e67f47bd04..0000000000 --- a/arch/arm/cpu/arm926ejs/at91/reset.c +++ /dev/null @@ -1,29 +0,0 @@ -/* - * (C) Copyright 2007-2008 - * Stelian Pop <stelian@popies.net> - * Lead Tech Design <www.leadtechdesign.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/hardware.h> -#include <asm/arch/at91_rstc.h> - -/* Reset the cpu by telling the reset controller to do so */ -void reset_cpu(ulong ignored) -{ - at91_rstc_t *rstc = (at91_rstc_t *) ATMEL_BASE_RSTC; - - writel(AT91_RSTC_KEY - | AT91_RSTC_CR_PROCRST /* Processor Reset */ - | AT91_RSTC_CR_PERRST /* Peripheral Reset */ -#ifdef CONFIG_AT91RESET_EXTRST - | AT91_RSTC_CR_EXTRST /* External Reset (assert nRST pin) */ -#endif - , &rstc->cr); - /* never reached */ - while (1) - ; -} diff --git a/arch/arm/cpu/arm926ejs/at91/timer.c b/arch/arm/cpu/arm926ejs/at91/timer.c deleted file mode 100644 index b0b7fb93fb..0000000000 --- a/arch/arm/cpu/arm926ejs/at91/timer.c +++ /dev/null @@ -1,120 +0,0 @@ -/* - * (C) Copyright 2007-2008 - * Stelian Pop <stelian@popies.net> - * Lead Tech Design <www.leadtechdesign.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/hardware.h> -#include <asm/arch/at91_pit.h> -#include <asm/arch/at91_pmc.h> -#include <asm/arch/clk.h> -#include <div64.h> - -#if !defined(CONFIG_AT91FAMILY) -# error You need to define CONFIG_AT91FAMILY in your board config! -#endif - -DECLARE_GLOBAL_DATA_PTR; - -/* - * We're using the AT91CAP9/SAM9 PITC in 32 bit mode, by - * setting the 20 bit counter period to its maximum (0xfffff). - * (See the relevant data sheets to understand that this really works) - * - * We do also mimic the typical powerpc way of incrementing - * two 32 bit registers called tbl and tbu. - * - * Those registers increment at 1/16 the main clock rate. - */ - -#define TIMER_LOAD_VAL 0xfffff - -static inline unsigned long long tick_to_time(unsigned long long tick) -{ - tick *= CONFIG_SYS_HZ; - do_div(tick, gd->arch.timer_rate_hz); - - return tick; -} - -static inline unsigned long long usec_to_tick(unsigned long long usec) -{ - usec *= gd->arch.timer_rate_hz; - do_div(usec, 1000000); - - return usec; -} - -/* - * Use the PITC in full 32 bit incrementing mode - */ -int timer_init(void) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_pit_t *pit = (at91_pit_t *) ATMEL_BASE_PIT; - - /* Enable PITC Clock */ - writel(1 << ATMEL_ID_SYS, &pmc->pcer); - - /* Enable PITC */ - writel(TIMER_LOAD_VAL | AT91_PIT_MR_EN , &pit->mr); - - gd->arch.timer_rate_hz = gd->arch.mck_rate_hz / 16; - gd->arch.tbu = gd->arch.tbl = 0; - - return 0; -} - -/* - * Get the current 64 bit timer tick count - */ -unsigned long long get_ticks(void) -{ - at91_pit_t *pit = (at91_pit_t *) ATMEL_BASE_PIT; - - ulong now = readl(&pit->piir); - - /* increment tbu if tbl has rolled over */ - if (now < gd->arch.tbl) - gd->arch.tbu++; - gd->arch.tbl = now; - return (((unsigned long long)gd->arch.tbu) << 32) | gd->arch.tbl; -} - -void __udelay(unsigned long usec) -{ - unsigned long long start; - ulong tmo; - - start = get_ticks(); /* get current timestamp */ - tmo = usec_to_tick(usec); /* convert usecs to ticks */ - while ((get_ticks() - start) < tmo) - ; /* loop till time has passed */ -} - -/* - * get_timer(base) can be used to check for timeouts or - * to measure elasped time relative to an event: - * - * ulong start_time = get_timer(0) sets start_time to the current - * time value. - * get_timer(start_time) returns the time elapsed since then. - * - * The time is used in CONFIG_SYS_HZ units! - */ -ulong get_timer(ulong base) -{ - return tick_to_time(get_ticks()) - base; -} - -/* - * Return the number of timer ticks per second. - */ -ulong get_tbclk(void) -{ - return gd->arch.timer_rate_hz; -} diff --git a/arch/arm/cpu/arm926ejs/davinci/Kconfig b/arch/arm/cpu/arm926ejs/davinci/Kconfig deleted file mode 100644 index 613f04d8b0..0000000000 --- a/arch/arm/cpu/arm926ejs/davinci/Kconfig +++ /dev/null @@ -1,78 +0,0 @@ -if ARCH_DAVINCI - -choice - prompt "DaVinci board select" - -config TARGET_ENBW_CMC - bool "EnBW CMC board" - -config TARGET_IPAM390 - bool "IPAM390 board" - select SUPPORT_SPL - -config TARGET_DA830EVM - bool "DA830 EVM board" - -config TARGET_DA850EVM - bool "DA850 EVM board" - select SUPPORT_SPL - -config TARGET_CAM_ENC_4XX - bool "CAM ENC 4xx board" - select SUPPORT_SPL - -config TARGET_HAWKBOARD - bool "Hawkboard" - select SUPPORT_SPL - -config TARGET_DAVINCI_DM355EVM - bool "DM355 EVM board" - -config TARGET_DAVINCI_DM355LEOPARD - bool "DM355 Leopard board" - -config TARGET_DAVINCI_DM365EVM - bool "DM365 EVM board" - -config TARGET_DAVINCI_DM6467EVM - bool "DM6467 EVM board" - -config TARGET_DAVINCI_DVEVM - bool "DVEVM board" - -config TARGET_EA20 - bool "EA20 board" - -config TARGET_DAVINCI_SCHMOOGIE - bool "Schmoogie board" - -config TARGET_DAVINCI_SFFSDR - bool "SFFSDR board" - -config TARGET_DAVINCI_SONATA - bool "Sonata board" - -config TARGET_CALIMAIN - bool "Calimain board" - -endchoice - -config SYS_SOC - default "davinci" - -source "board/enbw/enbw_cmc/Kconfig" -source "board/ait/cam_enc_4xx/Kconfig" -source "board/Barix/ipam390/Kconfig" -source "board/davinci/da8xxevm/Kconfig" -source "board/davinci/dm355evm/Kconfig" -source "board/davinci/dm355leopard/Kconfig" -source "board/davinci/dm365evm/Kconfig" -source "board/davinci/dm6467evm/Kconfig" -source "board/davinci/dvevm/Kconfig" -source "board/davinci/ea20/Kconfig" -source "board/davinci/schmoogie/Kconfig" -source "board/davinci/sffsdr/Kconfig" -source "board/davinci/sonata/Kconfig" -source "board/omicron/calimain/Kconfig" - -endif diff --git a/arch/arm/cpu/arm926ejs/davinci/Makefile b/arch/arm/cpu/arm926ejs/davinci/Makefile deleted file mode 100644 index 7d67191de8..0000000000 --- a/arch/arm/cpu/arm926ejs/davinci/Makefile +++ /dev/null @@ -1,28 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += cpu.o misc.o timer.o psc.o pinmux.o reset.o -obj-$(CONFIG_DA850_LOWLEVEL) += da850_lowlevel.o -obj-$(CONFIG_SOC_DM355) += dm355.o -obj-$(CONFIG_SOC_DM365) += dm365.o -obj-$(CONFIG_SOC_DM644X) += dm644x.o -obj-$(CONFIG_SOC_DM646X) += dm646x.o -obj-$(CONFIG_SOC_DA830) += da830_pinmux.o -obj-$(CONFIG_SOC_DA850) += da850_pinmux.o -obj-$(CONFIG_DRIVER_TI_EMAC) += lxt972.o dp83848.o et1011c.o ksz8873.o - -ifdef CONFIG_SPL_BUILD -obj-$(CONFIG_SPL_FRAMEWORK) += spl.o -obj-$(CONFIG_SOC_DM365) += dm365_lowlevel.o -obj-$(CONFIG_SOC_DA8XX) += da850_lowlevel.o -endif - -ifndef CONFIG_SKIP_LOWLEVEL_INIT -obj-y += lowlevel_init.o -endif diff --git a/arch/arm/cpu/arm926ejs/davinci/config.mk b/arch/arm/cpu/arm926ejs/davinci/config.mk deleted file mode 100644 index 69e9d5ab21..0000000000 --- a/arch/arm/cpu/arm926ejs/davinci/config.mk +++ /dev/null @@ -1,8 +0,0 @@ -# -# Copyright (C) 2012, Texas Instruments, Incorporated - http://www.ti.com/ -# -# SPDX-License-Identifier: GPL-2.0+ -# -ifndef CONFIG_SPL_BUILD -ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.ais -endif diff --git a/arch/arm/cpu/arm926ejs/davinci/cpu.c b/arch/arm/cpu/arm926ejs/davinci/cpu.c deleted file mode 100644 index ff61147757..0000000000 --- a/arch/arm/cpu/arm926ejs/davinci/cpu.c +++ /dev/null @@ -1,223 +0,0 @@ -/* - * Copyright (C) 2004 Texas Instruments. - * Copyright (C) 2009 David Brownell - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <netdev.h> -#include <asm/arch/hardware.h> -#include <asm/io.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* offsets from PLL controller base */ -#define PLLC_PLLCTL 0x100 -#define PLLC_PLLM 0x110 -#define PLLC_PREDIV 0x114 -#define PLLC_PLLDIV1 0x118 -#define PLLC_PLLDIV2 0x11c -#define PLLC_PLLDIV3 0x120 -#define PLLC_POSTDIV 0x128 -#define PLLC_BPDIV 0x12c -#define PLLC_PLLDIV4 0x160 -#define PLLC_PLLDIV5 0x164 -#define PLLC_PLLDIV6 0x168 -#define PLLC_PLLDIV7 0x16c -#define PLLC_PLLDIV8 0x170 -#define PLLC_PLLDIV9 0x174 - -#define BIT(x) (1 << (x)) - -/* SOC-specific pll info */ -#ifdef CONFIG_SOC_DM355 -#define ARM_PLLDIV PLLC_PLLDIV1 -#define DDR_PLLDIV PLLC_PLLDIV1 -#endif - -#ifdef CONFIG_SOC_DM644X -#define ARM_PLLDIV PLLC_PLLDIV2 -#define DSP_PLLDIV PLLC_PLLDIV1 -#define DDR_PLLDIV PLLC_PLLDIV2 -#endif - -#ifdef CONFIG_SOC_DM646X -#define DSP_PLLDIV PLLC_PLLDIV1 -#define ARM_PLLDIV PLLC_PLLDIV2 -#define DDR_PLLDIV PLLC_PLLDIV1 -#endif - -#ifdef CONFIG_SOC_DA8XX -unsigned int sysdiv[9] = { - PLLC_PLLDIV1, PLLC_PLLDIV2, PLLC_PLLDIV3, PLLC_PLLDIV4, PLLC_PLLDIV5, - PLLC_PLLDIV6, PLLC_PLLDIV7, PLLC_PLLDIV8, PLLC_PLLDIV9 -}; - -int clk_get(enum davinci_clk_ids id) -{ - int pre_div; - int pllm; - int post_div; - int pll_out; - unsigned int pll_base; - - pll_out = CONFIG_SYS_OSCIN_FREQ; - - if (id == DAVINCI_AUXCLK_CLKID) - goto out; - - if ((id >> 16) == 1) - pll_base = (unsigned int)davinci_pllc1_regs; - else - pll_base = (unsigned int)davinci_pllc0_regs; - - id &= 0xFFFF; - - /* - * Lets keep this simple. Combining operations can result in - * unexpected approximations - */ - pre_div = (readl(pll_base + PLLC_PREDIV) & - DAVINCI_PLLC_DIV_MASK) + 1; - pllm = readl(pll_base + PLLC_PLLM) + 1; - - pll_out /= pre_div; - pll_out *= pllm; - - if (id == DAVINCI_PLLM_CLKID) - goto out; - - post_div = (readl(pll_base + PLLC_POSTDIV) & - DAVINCI_PLLC_DIV_MASK) + 1; - - pll_out /= post_div; - - if (id == DAVINCI_PLLC_CLKID) - goto out; - - pll_out /= (readl(pll_base + sysdiv[id - 1]) & - DAVINCI_PLLC_DIV_MASK) + 1; - -out: - return pll_out; -} - -int set_cpu_clk_info(void) -{ - gd->bd->bi_arm_freq = clk_get(DAVINCI_ARM_CLKID) / 1000000; - /* DDR PHY uses an x2 input clock */ - gd->bd->bi_ddr_freq = cpu_is_da830() ? 0 : - (clk_get(DAVINCI_DDR_CLKID) / 1000000); - gd->bd->bi_dsp_freq = 0; - return 0; -} - -#else /* CONFIG_SOC_DA8XX */ - -static unsigned pll_div(volatile void *pllbase, unsigned offset) -{ - u32 div; - - div = REG(pllbase + offset); - return (div & BIT(15)) ? (1 + (div & 0x1f)) : 1; -} - -static inline unsigned pll_prediv(volatile void *pllbase) -{ -#ifdef CONFIG_SOC_DM355 - /* this register read seems to fail on pll0 */ - if (pllbase == (volatile void *)DAVINCI_PLL_CNTRL0_BASE) - return 8; - else - return pll_div(pllbase, PLLC_PREDIV); -#elif defined(CONFIG_SOC_DM365) - return pll_div(pllbase, PLLC_PREDIV); -#endif - return 1; -} - -static inline unsigned pll_postdiv(volatile void *pllbase) -{ -#if defined(CONFIG_SOC_DM355) || defined(CONFIG_SOC_DM365) - return pll_div(pllbase, PLLC_POSTDIV); -#elif defined(CONFIG_SOC_DM6446) - if (pllbase == (volatile void *)DAVINCI_PLL_CNTRL0_BASE) - return pll_div(pllbase, PLLC_POSTDIV); -#endif - return 1; -} - -static unsigned pll_sysclk_mhz(unsigned pll_addr, unsigned div) -{ - volatile void *pllbase = (volatile void *) pll_addr; -#ifdef CONFIG_SOC_DM646X - unsigned base = CONFIG_REFCLK_FREQ / 1000; -#else - unsigned base = CONFIG_SYS_HZ_CLOCK / 1000; -#endif - - /* the PLL might be bypassed */ - if (readl(pllbase + PLLC_PLLCTL) & BIT(0)) { - base /= pll_prediv(pllbase); -#if defined(CONFIG_SOC_DM365) - base *= 2 * (readl(pllbase + PLLC_PLLM) & 0x0ff); -#else - base *= 1 + (REG(pllbase + PLLC_PLLM) & 0x0ff); -#endif - base /= pll_postdiv(pllbase); - } - return DIV_ROUND_UP(base, 1000 * pll_div(pllbase, div)); -} - -#ifdef DAVINCI_DM6467EVM -unsigned int davinci_arm_clk_get() -{ - return pll_sysclk_mhz(DAVINCI_PLL_CNTRL0_BASE, ARM_PLLDIV) * 1000000; -} -#endif - -#if defined(CONFIG_SOC_DM365) -unsigned int davinci_clk_get(unsigned int div) -{ - return pll_sysclk_mhz(DAVINCI_PLL_CNTRL0_BASE, div) * 1000000; -} -#endif - -int set_cpu_clk_info(void) -{ - unsigned int pllbase = DAVINCI_PLL_CNTRL0_BASE; -#if defined(CONFIG_SOC_DM365) - pllbase = DAVINCI_PLL_CNTRL1_BASE; -#endif - gd->bd->bi_arm_freq = pll_sysclk_mhz(pllbase, ARM_PLLDIV); - -#ifdef DSP_PLLDIV - gd->bd->bi_dsp_freq = - pll_sysclk_mhz(DAVINCI_PLL_CNTRL0_BASE, DSP_PLLDIV); -#else - gd->bd->bi_dsp_freq = 0; -#endif - - pllbase = DAVINCI_PLL_CNTRL1_BASE; -#if defined(CONFIG_SOC_DM365) - pllbase = DAVINCI_PLL_CNTRL0_BASE; -#endif - gd->bd->bi_ddr_freq = pll_sysclk_mhz(pllbase, DDR_PLLDIV) / 2; - - return 0; -} - -#endif /* !CONFIG_SOC_DA8XX */ - -/* - * Initializes on-chip ethernet controllers. - * to override, implement board_eth_init() - */ -int cpu_eth_init(bd_t *bis) -{ -#if defined(CONFIG_DRIVER_TI_EMAC) - davinci_emac_initialize(); -#endif - return 0; -} diff --git a/arch/arm/cpu/arm926ejs/davinci/da830_pinmux.c b/arch/arm/cpu/arm926ejs/davinci/da830_pinmux.c deleted file mode 100644 index edaab45327..0000000000 --- a/arch/arm/cpu/arm926ejs/davinci/da830_pinmux.c +++ /dev/null @@ -1,139 +0,0 @@ -/* - * Pinmux configurations for the DA830 SoCs - * - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/arch/davinci_misc.h> -#include <asm/arch/hardware.h> -#include <asm/arch/pinmux_defs.h> - -/* SPI0 pin muxer settings */ -const struct pinmux_config spi0_pins_base[] = { - { pinmux(7), 1, 3 }, /* SPI0_SOMI */ - { pinmux(7), 1, 4 }, /* SPI0_SIMO */ - { pinmux(7), 1, 6 } /* SPI0_CLK */ -}; - -const struct pinmux_config spi0_pins_scs0[] = { - { pinmux(7), 1, 7 } /* SPI0_SCS[0] */ -}; - -const struct pinmux_config spi0_pins_ena[] = { - { pinmux(7), 1, 5 } /* SPI0_ENA */ -}; - -/* NAND pin muxer settings */ -const struct pinmux_config emifa_pins_cs0[] = { - { pinmux(18), 1, 2 } /* EMA_CS[0] */ -}; - -const struct pinmux_config emifa_pins_cs2[] = { - { pinmux(18), 1, 3 } /* EMA_CS[2] */ -}; - -const struct pinmux_config emifa_pins_cs3[] = { - { pinmux(18), 1, 4 } /* EMA_CS[3] */ -}; - -#ifdef CONFIG_USE_NAND -const struct pinmux_config emifa_pins[] = { - { pinmux(13), 1, 6 }, /* EMA_D[0] */ - { pinmux(13), 1, 7 }, /* EMA_D[1] */ - { pinmux(14), 1, 0 }, /* EMA_D[2] */ - { pinmux(14), 1, 1 }, /* EMA_D[3] */ - { pinmux(14), 1, 2 }, /* EMA_D[4] */ - { pinmux(14), 1, 3 }, /* EMA_D[5] */ - { pinmux(14), 1, 4 }, /* EMA_D[6] */ - { pinmux(14), 1, 5 }, /* EMA_D[7] */ - { pinmux(14), 1, 6 }, /* EMA_D[8] */ - { pinmux(14), 1, 7 }, /* EMA_D[9] */ - { pinmux(15), 1, 0 }, /* EMA_D[10] */ - { pinmux(15), 1, 1 }, /* EMA_D[11] */ - { pinmux(15), 1, 2 }, /* EMA_D[12] */ - { pinmux(15), 1, 3 }, /* EMA_D[13] */ - { pinmux(15), 1, 4 }, /* EMA_D[14] */ - { pinmux(15), 1, 5 }, /* EMA_D[15] */ - { pinmux(15), 1, 6 }, /* EMA_A[0] */ - { pinmux(15), 1, 7 }, /* EMA_A[1] */ - { pinmux(16), 1, 0 }, /* EMA_A[2] */ - { pinmux(16), 1, 1 }, /* EMA_A[3] */ - { pinmux(16), 1, 2 }, /* EMA_A[4] */ - { pinmux(16), 1, 3 }, /* EMA_A[5] */ - { pinmux(16), 1, 4 }, /* EMA_A[6] */ - { pinmux(16), 1, 5 }, /* EMA_A[7] */ - { pinmux(16), 1, 6 }, /* EMA_A[8] */ - { pinmux(16), 1, 7 }, /* EMA_A[9] */ - { pinmux(17), 1, 0 }, /* EMA_A[10] */ - { pinmux(17), 1, 1 }, /* EMA_A[11] */ - { pinmux(17), 1, 2 }, /* EMA_A[12] */ - { pinmux(17), 1, 3 }, /* EMA_BA[1] */ - { pinmux(17), 1, 4 }, /* EMA_BA[0] */ - { pinmux(17), 1, 5 }, /* EMA_CLK */ - { pinmux(17), 1, 6 }, /* EMA_SDCKE */ - { pinmux(17), 1, 7 }, /* EMA_CAS */ - { pinmux(18), 1, 0 }, /* EMA_CAS */ - { pinmux(18), 1, 1 }, /* EMA_WE */ - { pinmux(18), 1, 5 }, /* EMA_OE */ - { pinmux(18), 1, 6 }, /* EMA_WE_DQM[1] */ - { pinmux(18), 1, 7 }, /* EMA_WE_DQM[0] */ - { pinmux(10), 1, 0 } /* Tristate */ -}; -#endif - -/* EMAC PHY interface pins */ -const struct pinmux_config emac_pins_rmii[] = { - { pinmux(10), 2, 1 }, /* RMII_TXD[0] */ - { pinmux(10), 2, 2 }, /* RMII_TXD[1] */ - { pinmux(10), 2, 3 }, /* RMII_TXEN */ - { pinmux(10), 2, 4 }, /* RMII_CRS_DV */ - { pinmux(10), 2, 5 }, /* RMII_RXD[0] */ - { pinmux(10), 2, 6 }, /* RMII_RXD[1] */ - { pinmux(10), 2, 7 } /* RMII_RXER */ -}; - -const struct pinmux_config emac_pins_mdio[] = { - { pinmux(11), 2, 0 }, /* MDIO_CLK */ - { pinmux(11), 2, 1 } /* MDIO_D */ -}; - -const struct pinmux_config emac_pins_rmii_clk_source[] = { - { pinmux(9), 0, 5 } /* ref.clk from external source */ -}; - -/* UART2 pin muxer settings */ -const struct pinmux_config uart2_pins_txrx[] = { - { pinmux(8), 2, 7 }, /* UART2_RXD */ - { pinmux(9), 2, 0 } /* UART2_TXD */ -}; - -/* I2C0 pin muxer settings */ -const struct pinmux_config i2c0_pins[] = { - { pinmux(8), 2, 3 }, /* I2C0_SDA */ - { pinmux(8), 2, 4 } /* I2C0_SCL */ -}; - -/* USB0_DRVVBUS pin muxer settings */ -const struct pinmux_config usb_pins[] = { - { pinmux(9), 1, 1 } /* USB0_DRVVBUS */ -}; - -#ifdef CONFIG_DAVINCI_MMC -/* MMC0 pin muxer settings */ -const struct pinmux_config mmc0_pins_8bit[] = { - { pinmux(15), 2, 7 }, /* MMCSD0_CLK */ - { pinmux(16), 2, 0 }, /* MMCSD0_CMD */ - { pinmux(13), 2, 6 }, /* MMCSD0_DAT_0 */ - { pinmux(13), 2, 7 }, /* MMCSD0_DAT_1 */ - { pinmux(14), 2, 0 }, /* MMCSD0_DAT_2 */ - { pinmux(14), 2, 1 }, /* MMCSD0_DAT_3 */ - { pinmux(14), 2, 2 }, /* MMCSD0_DAT_4 */ - { pinmux(14), 2, 3 }, /* MMCSD0_DAT_5 */ - { pinmux(14), 2, 4 }, /* MMCSD0_DAT_6 */ - { pinmux(14), 2, 5 } /* MMCSD0_DAT_7 */ - /* DA830 supports 8-bit mode */ -}; -#endif diff --git a/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c b/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c deleted file mode 100644 index 19730cef8c..0000000000 --- a/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c +++ /dev/null @@ -1,313 +0,0 @@ -/* - * SoC-specific lowlevel code for DA850 - * - * Copyright (C) 2011 - * Heiko Schocher, DENX Software Engineering, hs@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#include <common.h> -#include <nand.h> -#include <ns16550.h> -#include <post.h> -#include <asm/arch/da850_lowlevel.h> -#include <asm/arch/hardware.h> -#include <asm/arch/davinci_misc.h> -#include <asm/arch/ddr2_defs.h> -#include <asm/ti-common/davinci_nand.h> -#include <asm/arch/pll_defs.h> - -void davinci_enable_uart0(void) -{ - lpsc_on(DAVINCI_LPSC_UART0); - - /* Bringup UART0 out of reset */ - REG(UART0_PWREMU_MGMT) = 0x00006001; -} - -#if defined(CONFIG_SYS_DA850_PLL_INIT) -static void da850_waitloop(unsigned long loopcnt) -{ - unsigned long i; - - for (i = 0; i < loopcnt; i++) - asm(" NOP"); -} - -static int da850_pll_init(struct davinci_pllc_regs *reg, unsigned long pllmult) -{ - if (reg == davinci_pllc0_regs) - /* Unlock PLL registers. */ - clrbits_le32(&davinci_syscfg_regs->cfgchip0, PLL_MASTER_LOCK); - - /* - * Set PLLENSRC '0',bit 5, PLL Enable(PLLEN) selection is controlled - * through MMR - */ - clrbits_le32(®->pllctl, PLLCTL_PLLENSRC); - /* PLLCTL.EXTCLKSRC bit 9 should be left at 0 for Freon */ - clrbits_le32(®->pllctl, PLLCTL_EXTCLKSRC); - - /* Set PLLEN=0 => PLL BYPASS MODE */ - clrbits_le32(®->pllctl, PLLCTL_PLLEN); - - da850_waitloop(150); - - if (reg == davinci_pllc0_regs) { - /* - * Select the Clock Mode bit 8 as External Clock or On Chip - * Oscilator - */ - dv_maskbits(®->pllctl, ~PLLCTL_RES_9); - setbits_le32(®->pllctl, - (CONFIG_SYS_DV_CLKMODE << PLLCTL_CLOCK_MODE_SHIFT)); - } - - /* Clear PLLRST bit to reset the PLL */ - clrbits_le32(®->pllctl, PLLCTL_PLLRST); - - /* Disable the PLL output */ - setbits_le32(®->pllctl, PLLCTL_PLLDIS); - - /* PLL initialization sequence */ - /* - * Power up the PLL- PWRDN bit set to 0 to bring the PLL out of - * power down bit - */ - clrbits_le32(®->pllctl, PLLCTL_PLLPWRDN); - - /* Enable the PLL from Disable Mode PLLDIS bit to 0 */ - clrbits_le32(®->pllctl, PLLCTL_PLLDIS); - -#if defined(CONFIG_SYS_DA850_PLL0_PREDIV) - /* program the prediv */ - if (reg == davinci_pllc0_regs && CONFIG_SYS_DA850_PLL0_PREDIV) - writel((PLL_DIVEN | CONFIG_SYS_DA850_PLL0_PREDIV), - ®->prediv); -#endif - - /* Program the required multiplier value in PLLM */ - writel(pllmult, ®->pllm); - - /* program the postdiv */ - if (reg == davinci_pllc0_regs) - writel((PLL_POSTDEN | CONFIG_SYS_DA850_PLL0_POSTDIV), - ®->postdiv); - else - writel((PLL_POSTDEN | CONFIG_SYS_DA850_PLL1_POSTDIV), - ®->postdiv); - - /* - * Check for the GOSTAT bit in PLLSTAT to clear to 0 to indicate that - * no GO operation is currently in progress - */ - while ((readl(®->pllstat) & PLLCMD_GOSTAT) == PLLCMD_GOSTAT) - ; - - if (reg == davinci_pllc0_regs) { - writel(CONFIG_SYS_DA850_PLL0_PLLDIV1, ®->plldiv1); - writel(CONFIG_SYS_DA850_PLL0_PLLDIV2, ®->plldiv2); - writel(CONFIG_SYS_DA850_PLL0_PLLDIV3, ®->plldiv3); - writel(CONFIG_SYS_DA850_PLL0_PLLDIV4, ®->plldiv4); - writel(CONFIG_SYS_DA850_PLL0_PLLDIV5, ®->plldiv5); - writel(CONFIG_SYS_DA850_PLL0_PLLDIV6, ®->plldiv6); - writel(CONFIG_SYS_DA850_PLL0_PLLDIV7, ®->plldiv7); - } else { - writel(CONFIG_SYS_DA850_PLL1_PLLDIV1, ®->plldiv1); - writel(CONFIG_SYS_DA850_PLL1_PLLDIV2, ®->plldiv2); - writel(CONFIG_SYS_DA850_PLL1_PLLDIV3, ®->plldiv3); - } - - /* - * Set the GOSET bit in PLLCMD to 1 to initiate a new divider - * transition. - */ - setbits_le32(®->pllcmd, PLLCMD_GOSTAT); - - /* - * Wait for the GOSTAT bit in PLLSTAT to clear to 0 - * (completion of phase alignment). - */ - while ((readl(®->pllstat) & PLLCMD_GOSTAT) == PLLCMD_GOSTAT) - ; - - /* Wait for PLL to reset properly. See PLL spec for PLL reset time */ - da850_waitloop(200); - - /* Set the PLLRST bit in PLLCTL to 1 to bring the PLL out of reset */ - setbits_le32(®->pllctl, PLLCTL_PLLRST); - - /* Wait for PLL to lock. See PLL spec for PLL lock time */ - da850_waitloop(2400); - - /* - * Set the PLLEN bit in PLLCTL to 1 to remove the PLL from bypass - * mode - */ - setbits_le32(®->pllctl, PLLCTL_PLLEN); - - - /* - * clear EMIFA and EMIFB clock source settings, let them - * run off SYSCLK - */ - if (reg == davinci_pllc0_regs) - dv_maskbits(&davinci_syscfg_regs->cfgchip3, - ~(PLL_SCSCFG3_DIV45PENA | PLL_SCSCFG3_EMA_CLKSRC)); - - return 0; -} -#endif /* CONFIG_SYS_DA850_PLL_INIT */ - -#if defined(CONFIG_SYS_DA850_DDR_INIT) -static int da850_ddr_setup(void) -{ - unsigned long tmp; - - /* Enable the Clock to DDR2/mDDR */ - lpsc_on(DAVINCI_LPSC_DDR_EMIF); - - tmp = readl(&davinci_syscfg1_regs->vtpio_ctl); - if ((tmp & VTP_POWERDWN) == VTP_POWERDWN) { - /* Begin VTP Calibration */ - clrbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_POWERDWN); - clrbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_LOCK); - setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_CLKRZ); - clrbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_CLKRZ); - setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_CLKRZ); - - /* Polling READY bit to see when VTP calibration is done */ - tmp = readl(&davinci_syscfg1_regs->vtpio_ctl); - while ((tmp & VTP_READY) != VTP_READY) - tmp = readl(&davinci_syscfg1_regs->vtpio_ctl); - - setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_LOCK); - setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_POWERDWN); - } - setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_IOPWRDWN); - writel(CONFIG_SYS_DA850_DDR2_DDRPHYCR, &dv_ddr2_regs_ctrl->ddrphycr); - - if (CONFIG_SYS_DA850_DDR2_SDBCR & (1 << DV_DDR_SDCR_DDR2EN_SHIFT)) { - /* DDR2 */ - clrbits_le32(&davinci_syscfg1_regs->ddr_slew, - (1 << DDR_SLEW_DDR_PDENA_BIT) | - (1 << DDR_SLEW_CMOSEN_BIT)); - } else { - /* MOBILE DDR */ - setbits_le32(&davinci_syscfg1_regs->ddr_slew, - (1 << DDR_SLEW_DDR_PDENA_BIT) | - (1 << DDR_SLEW_CMOSEN_BIT)); - } - - /* - * SDRAM Configuration Register (SDCR): - * First set the BOOTUNLOCK bit to make configuration bits - * writeable. - */ - setbits_le32(&dv_ddr2_regs_ctrl->sdbcr, DV_DDR_BOOTUNLOCK); - - /* - * Write the new value of these bits and clear BOOTUNLOCK. - * At the same time, set the TIMUNLOCK bit to allow changing - * the timing registers - */ - tmp = CONFIG_SYS_DA850_DDR2_SDBCR; - tmp &= ~DV_DDR_BOOTUNLOCK; - tmp |= DV_DDR_TIMUNLOCK; - writel(tmp, &dv_ddr2_regs_ctrl->sdbcr); - - /* write memory configuration and timing */ - if (!(CONFIG_SYS_DA850_DDR2_SDBCR & (1 << DV_DDR_SDCR_DDR2EN_SHIFT))) { - /* MOBILE DDR only*/ - writel(CONFIG_SYS_DA850_DDR2_SDBCR2, - &dv_ddr2_regs_ctrl->sdbcr2); - } - writel(CONFIG_SYS_DA850_DDR2_SDTIMR, &dv_ddr2_regs_ctrl->sdtimr); - writel(CONFIG_SYS_DA850_DDR2_SDTIMR2, &dv_ddr2_regs_ctrl->sdtimr2); - - /* clear the TIMUNLOCK bit and write the value of the CL field */ - tmp &= ~DV_DDR_TIMUNLOCK; - writel(tmp, &dv_ddr2_regs_ctrl->sdbcr); - - /* - * LPMODEN and MCLKSTOPEN must be set! - * Without this bits set, PSC don;t switch states !! - */ - writel(CONFIG_SYS_DA850_DDR2_SDRCR | - (1 << DV_DDR_SRCR_LPMODEN_SHIFT) | - (1 << DV_DDR_SRCR_MCLKSTOPEN_SHIFT), - &dv_ddr2_regs_ctrl->sdrcr); - - /* SyncReset the Clock to EMIF3A SDRAM */ - lpsc_syncreset(DAVINCI_LPSC_DDR_EMIF); - /* Enable the Clock to EMIF3A SDRAM */ - lpsc_on(DAVINCI_LPSC_DDR_EMIF); - - /* disable self refresh */ - clrbits_le32(&dv_ddr2_regs_ctrl->sdrcr, - DV_DDR_SDRCR_LPMODEN | DV_DDR_SDRCR_MCLKSTOPEN); - writel(CONFIG_SYS_DA850_DDR2_PBBPR, &dv_ddr2_regs_ctrl->pbbpr); - - return 0; -} -#endif /* CONFIG_SYS_DA850_DDR_INIT */ - -__attribute__((weak)) -void board_gpio_init(void) -{ - return; -} - -int arch_cpu_init(void) -{ - /* Unlock kick registers */ - writel(DV_SYSCFG_KICK0_UNLOCK, &davinci_syscfg_regs->kick0); - writel(DV_SYSCFG_KICK1_UNLOCK, &davinci_syscfg_regs->kick1); - - dv_maskbits(&davinci_syscfg_regs->suspsrc, - CONFIG_SYS_DA850_SYSCFG_SUSPSRC); - - /* configure pinmux settings */ - if (davinci_configure_pin_mux_items(pinmuxes, pinmuxes_size)) - return 1; - -#if defined(CONFIG_SYS_DA850_PLL_INIT) - /* PLL setup */ - da850_pll_init(davinci_pllc0_regs, CONFIG_SYS_DA850_PLL0_PLLM); - da850_pll_init(davinci_pllc1_regs, CONFIG_SYS_DA850_PLL1_PLLM); -#endif - /* setup CSn config */ -#if defined(CONFIG_SYS_DA850_CS2CFG) - writel(CONFIG_SYS_DA850_CS2CFG, &davinci_emif_regs->ab1cr); -#endif -#if defined(CONFIG_SYS_DA850_CS3CFG) - writel(CONFIG_SYS_DA850_CS3CFG, &davinci_emif_regs->ab2cr); -#endif - - da8xx_configure_lpsc_items(lpsc, lpsc_size); - - /* GPIO setup */ - board_gpio_init(); - - - NS16550_init((NS16550_t)(CONFIG_SYS_NS16550_COM1), - CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE); - - /* - * Fix Power and Emulation Management Register - * see sprufw3a.pdf page 37 Table 24 - */ - writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST | - DAVINCI_UART_PWREMU_MGMT_UTRST), -#if (CONFIG_SYS_NS16550_COM1 == DAVINCI_UART0_BASE) - &davinci_uart0_ctrl_regs->pwremu_mgmt); -#else - &davinci_uart2_ctrl_regs->pwremu_mgmt); -#endif - -#if defined(CONFIG_SYS_DA850_DDR_INIT) - da850_ddr_setup(); -#endif - - return 0; -} diff --git a/arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c b/arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c deleted file mode 100644 index 6105f6390c..0000000000 --- a/arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c +++ /dev/null @@ -1,181 +0,0 @@ -/* - * Pinmux configurations for the DA850 SoCs - * - * Copyright (C) 2011 OMICRON electronics GmbH - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/arch/davinci_misc.h> -#include <asm/arch/hardware.h> -#include <asm/arch/pinmux_defs.h> - -/* SPI pin muxer settings */ -const struct pinmux_config spi1_pins_base[] = { - { pinmux(5), 1, 2 }, /* SPI1_CLK */ - { pinmux(5), 1, 4 }, /* SPI1_SOMI */ - { pinmux(5), 1, 5 }, /* SPI1_SIMO */ -}; - -const struct pinmux_config spi1_pins_scs0[] = { - { pinmux(5), 1, 1 }, /* SPI1_SCS[0] */ -}; - -/* UART pin muxer settings */ -const struct pinmux_config uart0_pins_txrx[] = { - { pinmux(3), 2, 4 }, /* UART0_RXD */ - { pinmux(3), 2, 5 }, /* UART0_TXD */ -}; - -const struct pinmux_config uart0_pins_rtscts[] = { - { pinmux(3), 2, 6 }, - { pinmux(3), 2, 7 }, -}; - -const struct pinmux_config uart1_pins_txrx[] = { - { pinmux(4), 2, 6 }, /* UART1_RXD */ - { pinmux(4), 2, 7 }, /* UART1_TXD */ -}; - -const struct pinmux_config uart2_pins_txrx[] = { - { pinmux(4), 2, 4 }, /* UART2_RXD */ - { pinmux(4), 2, 5 }, /* UART2_TXD */ -}; - -const struct pinmux_config uart2_pins_rtscts[] = { - { pinmux(0), 4, 6 }, /* UART2_RTS */ - { pinmux(0), 4, 7 }, /* UART2_CTS */ -}; - -/* EMAC pin muxer settings*/ -const struct pinmux_config emac_pins_rmii[] = { - { pinmux(14), 8, 2 }, /* RMII_TXD[1] */ - { pinmux(14), 8, 3 }, /* RMII_TXD[0] */ - { pinmux(14), 8, 4 }, /* RMII_TXEN */ - { pinmux(14), 8, 5 }, /* RMII_RXD[1] */ - { pinmux(14), 8, 6 }, /* RMII_RXD[0] */ - { pinmux(14), 8, 7 }, /* RMII_RXER */ - { pinmux(15), 0, 0 }, /* RMII_MHz_50_CLK */ - { pinmux(15), 8, 1 }, /* RMII_CRS_DV */ -}; - -const struct pinmux_config emac_pins_mii[] = { - { pinmux(2), 8, 1 }, /* MII_TXEN */ - { pinmux(2), 8, 2 }, /* MII_TXCLK */ - { pinmux(2), 8, 3 }, /* MII_COL */ - { pinmux(2), 8, 4 }, /* MII_TXD[3] */ - { pinmux(2), 8, 5 }, /* MII_TXD[2] */ - { pinmux(2), 8, 6 }, /* MII_TXD[1] */ - { pinmux(2), 8, 7 }, /* MII_TXD[0] */ - { pinmux(3), 8, 0 }, /* MII_RXCLK */ - { pinmux(3), 8, 1 }, /* MII_RXDV */ - { pinmux(3), 8, 2 }, /* MII_RXER */ - { pinmux(3), 8, 3 }, /* MII_CRS */ - { pinmux(3), 8, 4 }, /* MII_RXD[3] */ - { pinmux(3), 8, 5 }, /* MII_RXD[2] */ - { pinmux(3), 8, 6 }, /* MII_RXD[1] */ - { pinmux(3), 8, 7 }, /* MII_RXD[0] */ -}; - -const struct pinmux_config emac_pins_mdio[] = { - { pinmux(4), 8, 0 }, /* MDIO_CLK */ - { pinmux(4), 8, 1 }, /* MDIO_D */ -}; - -/* I2C pin muxer settings */ -const struct pinmux_config i2c0_pins[] = { - { pinmux(4), 2, 2 }, /* I2C0_SCL */ - { pinmux(4), 2, 3 }, /* I2C0_SDA */ -}; - -const struct pinmux_config i2c1_pins[] = { - { pinmux(4), 4, 4 }, /* I2C1_SCL */ - { pinmux(4), 4, 5 }, /* I2C1_SDA */ -}; - -/* EMIFA pin muxer settings */ -const struct pinmux_config emifa_pins_cs2[] = { - { pinmux(7), 1, 0 }, /* EMA_CS2 */ -}; - -const struct pinmux_config emifa_pins_cs3[] = { - { pinmux(7), 1, 1 }, /* EMA_CS[3] */ -}; - -const struct pinmux_config emifa_pins_cs4[] = { - { pinmux(7), 1, 2 }, /* EMA_CS[4] */ -}; - -const struct pinmux_config emifa_pins_nand[] = { - { pinmux(7), 1, 4 }, /* EMA_WE */ - { pinmux(7), 1, 5 }, /* EMA_OE */ - { pinmux(9), 1, 0 }, /* EMA_D[7] */ - { pinmux(9), 1, 1 }, /* EMA_D[6] */ - { pinmux(9), 1, 2 }, /* EMA_D[5] */ - { pinmux(9), 1, 3 }, /* EMA_D[4] */ - { pinmux(9), 1, 4 }, /* EMA_D[3] */ - { pinmux(9), 1, 5 }, /* EMA_D[2] */ - { pinmux(9), 1, 6 }, /* EMA_D[1] */ - { pinmux(9), 1, 7 }, /* EMA_D[0] */ - { pinmux(12), 1, 5 }, /* EMA_A[2] */ - { pinmux(12), 1, 6 }, /* EMA_A[1] */ -}; - -/* NOR pin muxer settings */ -const struct pinmux_config emifa_pins_nor[] = { - { pinmux(5), 1, 6 }, /* EMA_BA[1] */ - { pinmux(6), 1, 6 }, /* EMA_WAIT[1] */ - { pinmux(7), 1, 4 }, /* EMA_WE */ - { pinmux(7), 1, 5 }, /* EMA_OE */ - { pinmux(8), 1, 0 }, /* EMA_D[15] */ - { pinmux(8), 1, 1 }, /* EMA_D[14] */ - { pinmux(8), 1, 2 }, /* EMA_D[13] */ - { pinmux(8), 1, 3 }, /* EMA_D[12] */ - { pinmux(8), 1, 4 }, /* EMA_D[11] */ - { pinmux(8), 1, 5 }, /* EMA_D[10] */ - { pinmux(8), 1, 6 }, /* EMA_D[9] */ - { pinmux(8), 1, 7 }, /* EMA_D[8] */ - { pinmux(9), 1, 0 }, /* EMA_D[7] */ - { pinmux(9), 1, 1 }, /* EMA_D[6] */ - { pinmux(9), 1, 2 }, /* EMA_D[5] */ - { pinmux(9), 1, 3 }, /* EMA_D[4] */ - { pinmux(9), 1, 4 }, /* EMA_D[3] */ - { pinmux(9), 1, 5 }, /* EMA_D[2] */ - { pinmux(9), 1, 6 }, /* EMA_D[1] */ - { pinmux(9), 1, 7 }, /* EMA_D[0] */ - { pinmux(10), 1, 1 }, /* EMA_A[22] */ - { pinmux(10), 1, 2 }, /* EMA_A[21] */ - { pinmux(10), 1, 3 }, /* EMA_A[20] */ - { pinmux(10), 1, 4 }, /* EMA_A[19] */ - { pinmux(10), 1, 5 }, /* EMA_A[18] */ - { pinmux(10), 1, 6 }, /* EMA_A[17] */ - { pinmux(10), 1, 7 }, /* EMA_A[16] */ - { pinmux(11), 1, 0 }, /* EMA_A[15] */ - { pinmux(11), 1, 1 }, /* EMA_A[14] */ - { pinmux(11), 1, 2 }, /* EMA_A[13] */ - { pinmux(11), 1, 3 }, /* EMA_A[12] */ - { pinmux(11), 1, 4 }, /* EMA_A[11] */ - { pinmux(11), 1, 5 }, /* EMA_A[10] */ - { pinmux(11), 1, 6 }, /* EMA_A[9] */ - { pinmux(11), 1, 7 }, /* EMA_A[8] */ - { pinmux(12), 1, 0 }, /* EMA_A[7] */ - { pinmux(12), 1, 1 }, /* EMA_A[6] */ - { pinmux(12), 1, 2 }, /* EMA_A[5] */ - { pinmux(12), 1, 3 }, /* EMA_A[4] */ - { pinmux(12), 1, 4 }, /* EMA_A[3] */ - { pinmux(12), 1, 5 }, /* EMA_A[2] */ - { pinmux(12), 1, 6 }, /* EMA_A[1] */ - { pinmux(12), 1, 7 }, /* EMA_A[0] */ -}; - -/* MMC0 pin muxer settings */ -const struct pinmux_config mmc0_pins[] = { - { pinmux(10), 2, 0 }, /* MMCSD0_CLK */ - { pinmux(10), 2, 1 }, /* MMCSD0_CMD */ - { pinmux(10), 2, 2 }, /* MMCSD0_DAT_0 */ - { pinmux(10), 2, 3 }, /* MMCSD0_DAT_1 */ - { pinmux(10), 2, 4 }, /* MMCSD0_DAT_2 */ - { pinmux(10), 2, 5 }, /* MMCSD0_DAT_3 */ - /* DA850 supports only 4-bit mode, remaining pins are not configured */ -}; diff --git a/arch/arm/cpu/arm926ejs/davinci/dm355.c b/arch/arm/cpu/arm926ejs/davinci/dm355.c deleted file mode 100644 index f9550a16d3..0000000000 --- a/arch/arm/cpu/arm926ejs/davinci/dm355.c +++ /dev/null @@ -1,30 +0,0 @@ -/* - * SoC-specific code for tms320dm355 and similar chips - * - * Copyright (C) 2009 David Brownell - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/arch/hardware.h> - - -void davinci_enable_uart0(void) -{ - lpsc_on(DAVINCI_LPSC_UART0); - - /* Bringup UART0 out of reset */ - REG(UART0_PWREMU_MGMT) = 0x00006001; -} - - -#ifdef CONFIG_SYS_I2C_DAVINCI -void davinci_enable_i2c(void) -{ - lpsc_on(DAVINCI_LPSC_I2C); - - /* Enable I2C pin Mux */ - REG(PINMUX3) |= (1 << 20) | (1 << 19); -} -#endif diff --git a/arch/arm/cpu/arm926ejs/davinci/dm365.c b/arch/arm/cpu/arm926ejs/davinci/dm365.c deleted file mode 100644 index f6ca527e74..0000000000 --- a/arch/arm/cpu/arm926ejs/davinci/dm365.c +++ /dev/null @@ -1,20 +0,0 @@ -/* - * SoC-specific code for tms320dm365 and similar chips - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/arch/hardware.h> - -void davinci_enable_uart0(void) -{ - lpsc_on(DAVINCI_LPSC_UART0); -} - -#ifdef CONFIG_SYS_I2C_DAVINCI -void davinci_enable_i2c(void) -{ - lpsc_on(DAVINCI_LPSC_I2C); -} -#endif diff --git a/arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c b/arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c deleted file mode 100644 index c8b44988d3..0000000000 --- a/arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c +++ /dev/null @@ -1,460 +0,0 @@ -/* - * SoC-specific lowlevel code for tms320dm365 and similar chips - * Actually used for booting from NAND with nand_spl. - * - * Copyright (C) 2011 - * Heiko Schocher, DENX Software Engineering, hs@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#include <common.h> -#include <nand.h> -#include <ns16550.h> -#include <post.h> -#include <asm/ti-common/davinci_nand.h> -#include <asm/arch/dm365_lowlevel.h> -#include <asm/arch/hardware.h> - -void dm365_waitloop(unsigned long loopcnt) -{ - unsigned long i; - - for (i = 0; i < loopcnt; i++) - asm(" NOP"); -} - -int dm365_pll1_init(unsigned long pllmult, unsigned long prediv) -{ - unsigned int clksrc = 0x0; - - /* Power up the PLL */ - clrbits_le32(&dv_pll0_regs->pllctl, PLLCTL_PLLPWRDN); - - clrbits_le32(&dv_pll0_regs->pllctl, PLLCTL_RES_9); - setbits_le32(&dv_pll0_regs->pllctl, - clksrc << PLLCTL_CLOCK_MODE_SHIFT); - - /* - * Set PLLENSRC '0', PLL Enable(PLLEN) selection is controlled - * through MMR - */ - clrbits_le32(&dv_pll0_regs->pllctl, PLLCTL_PLLENSRC); - - /* Set PLLEN=0 => PLL BYPASS MODE */ - clrbits_le32(&dv_pll0_regs->pllctl, PLLCTL_PLLEN); - - dm365_waitloop(150); - - /* PLLRST=1(reset assert) */ - setbits_le32(&dv_pll0_regs->pllctl, PLLCTL_PLLRST); - - dm365_waitloop(300); - - /*Bring PLL out of Reset*/ - clrbits_le32(&dv_pll0_regs->pllctl, PLLCTL_PLLRST); - - /* Program the Multiper and Pre-Divider for PLL1 */ - writel(pllmult, &dv_pll0_regs->pllm); - writel(prediv, &dv_pll0_regs->prediv); - - /* Assert TENABLE = 1, TENABLEDIV = 1, TINITZ = 1 */ - writel(PLLSECCTL_STOPMODE | PLLSECCTL_TENABLEDIV | PLLSECCTL_TENABLE | - PLLSECCTL_TINITZ, &dv_pll0_regs->secctl); - /* Assert TENABLE = 1, TENABLEDIV = 1, TINITZ = 0 */ - writel(PLLSECCTL_STOPMODE | PLLSECCTL_TENABLEDIV | PLLSECCTL_TENABLE, - &dv_pll0_regs->secctl); - /* Assert TENABLE = 0, TENABLEDIV = 0, TINITZ = 0 */ - writel(PLLSECCTL_STOPMODE, &dv_pll0_regs->secctl); - /* Assert TENABLE = 0, TENABLEDIV = 0, TINITZ = 1 */ - writel(PLLSECCTL_STOPMODE | PLLSECCTL_TINITZ, &dv_pll0_regs->secctl); - - /* Program the PostDiv for PLL1 */ - writel(PLL_POSTDEN, &dv_pll0_regs->postdiv); - - /* Post divider setting for PLL1 */ - writel(CONFIG_SYS_DM36x_PLL1_PLLDIV1, &dv_pll0_regs->plldiv1); - writel(CONFIG_SYS_DM36x_PLL1_PLLDIV2, &dv_pll0_regs->plldiv2); - writel(CONFIG_SYS_DM36x_PLL1_PLLDIV3, &dv_pll0_regs->plldiv3); - writel(CONFIG_SYS_DM36x_PLL1_PLLDIV4, &dv_pll0_regs->plldiv4); - writel(CONFIG_SYS_DM36x_PLL1_PLLDIV5, &dv_pll0_regs->plldiv5); - writel(CONFIG_SYS_DM36x_PLL1_PLLDIV6, &dv_pll0_regs->plldiv6); - writel(CONFIG_SYS_DM36x_PLL1_PLLDIV7, &dv_pll0_regs->plldiv7); - writel(CONFIG_SYS_DM36x_PLL1_PLLDIV8, &dv_pll0_regs->plldiv8); - writel(CONFIG_SYS_DM36x_PLL1_PLLDIV9, &dv_pll0_regs->plldiv9); - - dm365_waitloop(300); - - /* Set the GOSET bit */ - writel(PLLCMD_GOSET, &dv_pll0_regs->pllcmd); /* Go */ - - dm365_waitloop(300); - - /* Wait for PLL to LOCK */ - while (!((readl(&dv_sys_module_regs->pll0_config) & PLL0_LOCK) - == PLL0_LOCK)) - ; - - /* Enable the PLL Bit of PLLCTL*/ - setbits_le32(&dv_pll0_regs->pllctl, PLLCTL_PLLEN); - - return 0; -} - -int dm365_pll2_init(unsigned long pllm, unsigned long prediv) -{ - unsigned int clksrc = 0x0; - - /* Power up the PLL*/ - clrbits_le32(&dv_pll1_regs->pllctl, PLLCTL_PLLPWRDN); - - /* - * Select the Clock Mode as Onchip Oscilator or External Clock on - * MXI pin - * VDB has input on MXI pin - */ - clrbits_le32(&dv_pll1_regs->pllctl, PLLCTL_RES_9); - setbits_le32(&dv_pll1_regs->pllctl, - clksrc << PLLCTL_CLOCK_MODE_SHIFT); - - /* - * Set PLLENSRC '0', PLL Enable(PLLEN) selection is controlled - * through MMR - */ - clrbits_le32(&dv_pll1_regs->pllctl, PLLCTL_PLLENSRC); - - /* Set PLLEN=0 => PLL BYPASS MODE */ - clrbits_le32(&dv_pll1_regs->pllctl, PLLCTL_PLLEN); - - dm365_waitloop(50); - - /* PLLRST=1(reset assert) */ - setbits_le32(&dv_pll1_regs->pllctl, PLLCTL_PLLRST); - - dm365_waitloop(300); - - /* Bring PLL out of Reset */ - clrbits_le32(&dv_pll1_regs->pllctl, PLLCTL_PLLRST); - - /* Program the Multiper and Pre-Divider for PLL2 */ - writel(pllm, &dv_pll1_regs->pllm); - writel(prediv, &dv_pll1_regs->prediv); - - writel(PLL_POSTDEN, &dv_pll1_regs->postdiv); - - /* Assert TENABLE = 1, TENABLEDIV = 1, TINITZ = 1 */ - writel(PLLSECCTL_STOPMODE | PLLSECCTL_TENABLEDIV | PLLSECCTL_TENABLE | - PLLSECCTL_TINITZ, &dv_pll1_regs->secctl); - /* Assert TENABLE = 1, TENABLEDIV = 1, TINITZ = 0 */ - writel(PLLSECCTL_STOPMODE | PLLSECCTL_TENABLEDIV | PLLSECCTL_TENABLE, - &dv_pll1_regs->secctl); - /* Assert TENABLE = 0, TENABLEDIV = 0, TINITZ = 0 */ - writel(PLLSECCTL_STOPMODE, &dv_pll1_regs->secctl); - /* Assert TENABLE = 0, TENABLEDIV = 0, TINITZ = 1 */ - writel(PLLSECCTL_STOPMODE | PLLSECCTL_TINITZ, &dv_pll1_regs->secctl); - - /* Post divider setting for PLL2 */ - writel(CONFIG_SYS_DM36x_PLL2_PLLDIV1, &dv_pll1_regs->plldiv1); - writel(CONFIG_SYS_DM36x_PLL2_PLLDIV2, &dv_pll1_regs->plldiv2); - writel(CONFIG_SYS_DM36x_PLL2_PLLDIV3, &dv_pll1_regs->plldiv3); - writel(CONFIG_SYS_DM36x_PLL2_PLLDIV4, &dv_pll1_regs->plldiv4); - writel(CONFIG_SYS_DM36x_PLL2_PLLDIV5, &dv_pll1_regs->plldiv5); - - /* GoCmd for PostDivider to take effect */ - writel(PLLCMD_GOSET, &dv_pll1_regs->pllcmd); - - dm365_waitloop(150); - - /* Wait for PLL to LOCK */ - while (!((readl(&dv_sys_module_regs->pll1_config) & PLL1_LOCK) - == PLL1_LOCK)) - ; - - dm365_waitloop(4100); - - /* Enable the PLL2 */ - setbits_le32(&dv_pll1_regs->pllctl, PLLCTL_PLLEN); - - /* do this after PLL's have been set up */ - writel(CONFIG_SYS_DM36x_PERI_CLK_CTRL, - &dv_sys_module_regs->peri_clkctl); - - return 0; -} - -int dm365_ddr_setup(void) -{ - lpsc_on(DAVINCI_LPSC_DDR_EMIF); - clrbits_le32(&dv_sys_module_regs->vtpiocr, - VPTIO_IOPWRDN | VPTIO_CLRZ | VPTIO_LOCK | VPTIO_PWRDN); - - /* Set bit CLRZ (bit 13) */ - setbits_le32(&dv_sys_module_regs->vtpiocr, VPTIO_CLRZ); - - /* Check VTP READY Status */ - while (!(readl(&dv_sys_module_regs->vtpiocr) & VPTIO_RDY)) - ; - - /* Set bit VTP_IOPWRDWN bit 14 for DDR input buffers) */ - setbits_le32(&dv_sys_module_regs->vtpiocr, VPTIO_IOPWRDN); - - /* Set bit LOCK(bit7) */ - setbits_le32(&dv_sys_module_regs->vtpiocr, VPTIO_LOCK); - - /* - * Powerdown VTP as it is locked (bit 6) - * Set bit VTP_IOPWRDWN bit 14 for DDR input buffers) - */ - setbits_le32(&dv_sys_module_regs->vtpiocr, - VPTIO_IOPWRDN | VPTIO_PWRDN); - - /* Wait for calibration to complete */ - dm365_waitloop(150); - - /* Set the DDR2 to synreset, then enable it again */ - lpsc_syncreset(DAVINCI_LPSC_DDR_EMIF); - lpsc_on(DAVINCI_LPSC_DDR_EMIF); - - writel(CONFIG_SYS_DM36x_DDR2_DDRPHYCR, &dv_ddr2_regs_ctrl->ddrphycr); - - /* Program SDRAM Bank Config Register */ - writel((CONFIG_SYS_DM36x_DDR2_SDBCR | DV_DDR_BOOTUNLOCK), - &dv_ddr2_regs_ctrl->sdbcr); - writel((CONFIG_SYS_DM36x_DDR2_SDBCR | DV_DDR_TIMUNLOCK), - &dv_ddr2_regs_ctrl->sdbcr); - - /* Program SDRAM Timing Control Register1 */ - writel(CONFIG_SYS_DM36x_DDR2_SDTIMR, &dv_ddr2_regs_ctrl->sdtimr); - /* Program SDRAM Timing Control Register2 */ - writel(CONFIG_SYS_DM36x_DDR2_SDTIMR2, &dv_ddr2_regs_ctrl->sdtimr2); - - writel(CONFIG_SYS_DM36x_DDR2_PBBPR, &dv_ddr2_regs_ctrl->pbbpr); - - writel(CONFIG_SYS_DM36x_DDR2_SDBCR, &dv_ddr2_regs_ctrl->sdbcr); - - /* Program SDRAM Refresh Control Register */ - writel(CONFIG_SYS_DM36x_DDR2_SDRCR, &dv_ddr2_regs_ctrl->sdrcr); - - lpsc_syncreset(DAVINCI_LPSC_DDR_EMIF); - lpsc_on(DAVINCI_LPSC_DDR_EMIF); - - return 0; -} - -static void dm365_vpss_sync_reset(void) -{ - unsigned int PdNum = 0; - - /* VPSS_CLKMD 1:1 */ - setbits_le32(&dv_sys_module_regs->vpss_clkctl, - VPSS_CLK_CTL_VPSS_CLKMD); - - /* LPSC SyncReset DDR Clock Enable */ - writel(((readl(&dv_psc_regs->mdctl[DAVINCI_LPSC_VPSSMASTER]) & - ~PSC_MD_STATE_MSK) | PSC_SYNCRESET), - &dv_psc_regs->mdctl[DAVINCI_LPSC_VPSSMASTER]); - - writel((1 << PdNum), &dv_psc_regs->ptcmd); - - while (!(((readl(&dv_psc_regs->ptstat) >> PdNum) & PSC_GOSTAT) == 0)) - ; - while (!((readl(&dv_psc_regs->mdstat[DAVINCI_LPSC_VPSSMASTER]) & - PSC_MD_STATE_MSK) == PSC_SYNCRESET)) - ; -} - -static void dm365_por_reset(void) -{ - struct davinci_timer *wdog = - (struct davinci_timer *)DAVINCI_WDOG_BASE; - - if (readl(&dv_pll0_regs->rstype) & - (PLL_RSTYPE_POR | PLL_RSTYPE_XWRST)) { - dm365_vpss_sync_reset(); - - writel(DV_TMPBUF_VAL, TMPBUF); - setbits_le32(TMPSTATUS, FLAG_PORRST); - writel(DV_WDT_ENABLE_SYS_RESET, &wdog->na1); - writel(DV_WDT_TRIGGER_SYS_RESET, &wdog->na2); - - while (1); - } -} - -static void dm365_wdt_reset(void) -{ - struct davinci_timer *wdog = - (struct davinci_timer *)DAVINCI_WDOG_BASE; - - if (readl(TMPBUF) != DV_TMPBUF_VAL) { - writel(DV_TMPBUF_VAL, TMPBUF); - setbits_le32(TMPSTATUS, FLAG_PORRST); - setbits_le32(TMPSTATUS, FLAG_FLGOFF); - - dm365_waitloop(100); - - dm365_vpss_sync_reset(); - - writel(DV_WDT_ENABLE_SYS_RESET, &wdog->na1); - writel(DV_WDT_TRIGGER_SYS_RESET, &wdog->na2); - - while (1); - } -} - -static void dm365_wdt_flag_on(void) -{ - /* VPSS_CLKMD 1:2 */ - clrbits_le32(&dv_sys_module_regs->vpss_clkctl, - VPSS_CLK_CTL_VPSS_CLKMD); - writel(0, TMPBUF); - setbits_le32(TMPSTATUS, FLAG_FLGON); -} - -void dm365_psc_init(void) -{ - unsigned char i = 0; - unsigned char lpsc_start; - unsigned char lpsc_end, lpscgroup, lpscmin, lpscmax; - unsigned int PdNum = 0; - - lpscmin = 0; - lpscmax = 2; - - for (lpscgroup = lpscmin; lpscgroup <= lpscmax; lpscgroup++) { - if (lpscgroup == 0) { - /* Enabling LPSC 3 to 28 SCR first */ - lpsc_start = DAVINCI_LPSC_VPSSMSTR; - lpsc_end = DAVINCI_LPSC_TIMER1; - } else if (lpscgroup == 1) { /* Skip locked LPSCs [29-37] */ - lpsc_start = DAVINCI_LPSC_CFG5; - lpsc_end = DAVINCI_LPSC_VPSSMASTER; - } else { - lpsc_start = DAVINCI_LPSC_MJCP; - lpsc_end = DAVINCI_LPSC_HDVICP; - } - - /* NEXT=0x3, Enable LPSC's */ - for (i = lpsc_start; i <= lpsc_end; i++) - setbits_le32(&dv_psc_regs->mdctl[i], PSC_ENABLE); - - /* - * Program goctl to start transition sequence for LPSCs - * CSL_PSC_0_REGS->PTCMD = (1<<PdNum); Kick off Power - * Domain 0 Modules - */ - writel((1 << PdNum), &dv_psc_regs->ptcmd); - - /* - * Wait for GOSTAT = NO TRANSITION from PSC for Powerdomain 0 - */ - while (!(((readl(&dv_psc_regs->ptstat) >> PdNum) & PSC_GOSTAT) - == 0)) - ; - - /* Wait for MODSTAT = ENABLE from LPSC's */ - for (i = lpsc_start; i <= lpsc_end; i++) - while (!((readl(&dv_psc_regs->mdstat[i]) & - PSC_MD_STATE_MSK) == PSC_ENABLE)) - ; - } -} - -static void dm365_emif_init(void) -{ - writel(CONFIG_SYS_DM36x_AWCCR, &davinci_emif_regs->awccr); - writel(CONFIG_SYS_DM36x_AB1CR, &davinci_emif_regs->ab1cr); - - setbits_le32(&davinci_emif_regs->nandfcr, DAVINCI_NANDFCR_CS2NAND); - - writel(CONFIG_SYS_DM36x_AB2CR, &davinci_emif_regs->ab2cr); - - return; -} - -void dm365_pinmux_ctl(unsigned long offset, unsigned long mask, - unsigned long value) -{ - clrbits_le32(&dv_sys_module_regs->pinmux[offset], mask); - setbits_le32(&dv_sys_module_regs->pinmux[offset], (mask & value)); -} - -__attribute__((weak)) -void board_gpio_init(void) -{ - return; -} - -#if defined(CONFIG_POST) -int post_log(char *format, ...) -{ - return 0; -} -#endif - -void dm36x_lowlevel_init(ulong bootflag) -{ - struct davinci_uart_ctrl_regs *davinci_uart_ctrl_regs = - (struct davinci_uart_ctrl_regs *)(CONFIG_SYS_NS16550_COM1 + - DAVINCI_UART_CTRL_BASE); - - /* Mask all interrupts */ - writel(DV_AINTC_INTCTL_IDMODE, &dv_aintc_regs->intctl); - writel(0x0, &dv_aintc_regs->eabase); - writel(0x0, &dv_aintc_regs->eint0); - writel(0x0, &dv_aintc_regs->eint1); - - /* Clear all interrupts */ - writel(0xffffffff, &dv_aintc_regs->fiq0); - writel(0xffffffff, &dv_aintc_regs->fiq1); - writel(0xffffffff, &dv_aintc_regs->irq0); - writel(0xffffffff, &dv_aintc_regs->irq1); - - dm365_por_reset(); - dm365_wdt_reset(); - - /* System PSC setup - enable all */ - dm365_psc_init(); - - /* Setup Pinmux */ - dm365_pinmux_ctl(0, 0xFFFFFFFF, CONFIG_SYS_DM36x_PINMUX0); - dm365_pinmux_ctl(1, 0xFFFFFFFF, CONFIG_SYS_DM36x_PINMUX1); - dm365_pinmux_ctl(2, 0xFFFFFFFF, CONFIG_SYS_DM36x_PINMUX2); - dm365_pinmux_ctl(3, 0xFFFFFFFF, CONFIG_SYS_DM36x_PINMUX3); - dm365_pinmux_ctl(4, 0xFFFFFFFF, CONFIG_SYS_DM36x_PINMUX4); - - /* PLL setup */ - dm365_pll1_init(CONFIG_SYS_DM36x_PLL1_PLLM, - CONFIG_SYS_DM36x_PLL1_PREDIV); - dm365_pll2_init(CONFIG_SYS_DM36x_PLL2_PLLM, - CONFIG_SYS_DM36x_PLL2_PREDIV); - - /* GPIO setup */ - board_gpio_init(); - - NS16550_init((NS16550_t)(CONFIG_SYS_NS16550_COM1), - CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE); - - /* - * Fix Power and Emulation Management Register - * see sprufh2.pdf page 38 Table 22 - */ - writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST | - DAVINCI_UART_PWREMU_MGMT_UTRST), - &davinci_uart_ctrl_regs->pwremu_mgmt); - - puts("ddr init\n"); - dm365_ddr_setup(); - - puts("emif init\n"); - dm365_emif_init(); - - dm365_wdt_flag_on(); - -#if defined(CONFIG_POST) - /* - * Do memory tests, calls arch_memory_failure_handle() - * if error detected. - */ - memory_post_test(0); -#endif -} diff --git a/arch/arm/cpu/arm926ejs/davinci/dm644x.c b/arch/arm/cpu/arm926ejs/davinci/dm644x.c deleted file mode 100644 index c58e271e28..0000000000 --- a/arch/arm/cpu/arm926ejs/davinci/dm644x.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - * SoC-specific code for tms320dm644x chips - * - * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> - * Copyright (C) 2008 Lyrtech <www.lyrtech.com> - * Copyright (C) 2004 Texas Instruments. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/arch/hardware.h> - - -#define PINMUX0_EMACEN (1 << 31) -#define PINMUX0_AECS5 (1 << 11) -#define PINMUX0_AECS4 (1 << 10) - -#define PINMUX1_I2C (1 << 7) -#define PINMUX1_UART1 (1 << 1) -#define PINMUX1_UART0 (1 << 0) - - -void davinci_enable_uart0(void) -{ - lpsc_on(DAVINCI_LPSC_UART0); - - /* Bringup UART0 out of reset */ - REG(UART0_PWREMU_MGMT) = 0x00006001; - - /* Enable UART0 MUX lines */ - REG(PINMUX1) |= PINMUX1_UART0; -} - -#ifdef CONFIG_DRIVER_TI_EMAC -void davinci_enable_emac(void) -{ - lpsc_on(DAVINCI_LPSC_EMAC); - lpsc_on(DAVINCI_LPSC_EMAC_WRAPPER); - lpsc_on(DAVINCI_LPSC_MDIO); - - /* Enable GIO3.3V cells used for EMAC */ - REG(VDD3P3V_PWDN) = 0; - - /* Enable EMAC. */ - REG(PINMUX0) |= PINMUX0_EMACEN; -} -#endif - -#ifdef CONFIG_SYS_I2C_DAVINCI -void davinci_enable_i2c(void) -{ - lpsc_on(DAVINCI_LPSC_I2C); - - /* Enable I2C pin Mux */ - REG(PINMUX1) |= PINMUX1_I2C; -} -#endif - -void davinci_errata_workarounds(void) -{ - /* - * Workaround for TMS320DM6446 errata 1.3.22: - * PSC: PTSTAT Register Does Not Clear After Warm/Maximum Reset - * Revision(s) Affected: 1.3 and earlier - */ - REG(PSC_SILVER_BULLET) = 0; - - /* - * Set the PR_OLD_COUNT bits in the Bus Burst Priority Register (PBBPR) - * as suggested in TMS320DM6446 errata 2.1.2: - * - * On DM6446 Silicon Revision 2.1 and earlier, under certain conditions - * low priority modules can occupy the bus and prevent high priority - * modules like the VPSS from getting the required DDR2 throughput. - * A hex value of 0x20 should provide a good ARM (cache enabled) - * performance and still allow good utilization by the VPSS or other - * modules. - */ - REG(VBPR) = 0x20; -} diff --git a/arch/arm/cpu/arm926ejs/davinci/dm646x.c b/arch/arm/cpu/arm926ejs/davinci/dm646x.c deleted file mode 100644 index cfea8300de..0000000000 --- a/arch/arm/cpu/arm926ejs/davinci/dm646x.c +++ /dev/null @@ -1,26 +0,0 @@ -/* - * SoC-specific code for TMS320DM646x chips - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <asm/arch/hardware.h> - -void davinci_enable_uart0(void) -{ - lpsc_on(DAVINCI_DM646X_LPSC_UART0); -} - -#ifdef CONFIG_DRIVER_TI_EMAC -void davinci_enable_emac(void) -{ - lpsc_on(DAVINCI_DM646X_LPSC_EMAC); -} -#endif - -#ifdef CONFIG_SYS_I2C_DAVINCI -void davinci_enable_i2c(void) -{ - lpsc_on(DAVINCI_DM646X_LPSC_I2C); -} -#endif diff --git a/arch/arm/cpu/arm926ejs/davinci/dp83848.c b/arch/arm/cpu/arm926ejs/davinci/dp83848.c deleted file mode 100644 index 603d507c70..0000000000 --- a/arch/arm/cpu/arm926ejs/davinci/dp83848.c +++ /dev/null @@ -1,128 +0,0 @@ -/* - * National Semiconductor DP83848 PHY Driver for TI DaVinci - * (TMS320DM644x) based boards. - * - * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> - * - * -------------------------------------------------------- - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <net.h> -#include <dp83848.h> -#include <asm/arch/emac_defs.h> -#include "../../../../../drivers/net/davinci_emac.h" - -#ifdef CONFIG_DRIVER_TI_EMAC - -#ifdef CONFIG_CMD_NET - -int dp83848_is_phy_connected(int phy_addr) -{ - u_int16_t id1, id2; - - if (!davinci_eth_phy_read(phy_addr, DP83848_PHYID1_REG, &id1)) - return(0); - if (!davinci_eth_phy_read(phy_addr, DP83848_PHYID2_REG, &id2)) - return(0); - - if ((id1 == DP83848_PHYID1_OUI) && (id2 == DP83848_PHYID2_OUI)) - return(1); - - return(0); -} - -int dp83848_get_link_speed(int phy_addr) -{ - u_int16_t tmp; - volatile emac_regs* emac = (emac_regs *)EMAC_BASE_ADDR; - - if (!davinci_eth_phy_read(phy_addr, DP83848_STAT_REG, &tmp)) - return(0); - - if (!(tmp & DP83848_LINK_STATUS)) /* link up? */ - return(0); - - if (!davinci_eth_phy_read(phy_addr, DP83848_PHY_STAT_REG, &tmp)) - return(0); - - /* Speed doesn't matter, there is no setting for it in EMAC... */ - if (tmp & DP83848_DUPLEX) { - /* set DM644x EMAC for Full Duplex */ - emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE | - EMAC_MACCONTROL_FULLDUPLEX_ENABLE; - } else { - /*set DM644x EMAC for Half Duplex */ - emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE; - } - - return(1); -} - - -int dp83848_init_phy(int phy_addr) -{ - int ret = 1; - - if (!dp83848_get_link_speed(phy_addr)) { - /* Try another time */ - udelay(100000); - ret = dp83848_get_link_speed(phy_addr); - } - - /* Disable PHY Interrupts */ - davinci_eth_phy_write(phy_addr, DP83848_PHY_INTR_CTRL_REG, 0); - - return(ret); -} - - -int dp83848_auto_negotiate(int phy_addr) -{ - u_int16_t tmp; - - - if (!davinci_eth_phy_read(phy_addr, DP83848_CTL_REG, &tmp)) - return(0); - - /* Restart Auto_negotiation */ - tmp &= ~DP83848_AUTONEG; /* remove autonegotiation enable */ - tmp |= DP83848_ISOLATE; /* Electrically isolate PHY */ - davinci_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp); - - /* Set the Auto_negotiation Advertisement Register - * MII advertising for Next page, 100BaseTxFD and HD, - * 10BaseTFD and HD, IEEE 802.3 - */ - tmp = DP83848_NP | DP83848_TX_FDX | DP83848_TX_HDX | - DP83848_10_FDX | DP83848_10_HDX | DP83848_AN_IEEE_802_3; - davinci_eth_phy_write(phy_addr, DP83848_ANA_REG, tmp); - - - /* Read Control Register */ - if (!davinci_eth_phy_read(phy_addr, DP83848_CTL_REG, &tmp)) - return(0); - - tmp |= DP83848_SPEED_SELECT | DP83848_AUTONEG | DP83848_DUPLEX_MODE; - davinci_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp); - - /* Restart Auto_negotiation */ - tmp |= DP83848_RESTART_AUTONEG; - davinci_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp); - - /*check AutoNegotiate complete */ - udelay(10000); - if (!davinci_eth_phy_read(phy_addr, DP83848_STAT_REG, &tmp)) - return(0); - - if (!(tmp & DP83848_AUTONEG_COMP)) - return(0); - - return (dp83848_get_link_speed(phy_addr)); -} - -#endif /* CONFIG_CMD_NET */ - -#endif /* CONFIG_DRIVER_ETHER */ diff --git a/arch/arm/cpu/arm926ejs/davinci/et1011c.c b/arch/arm/cpu/arm926ejs/davinci/et1011c.c deleted file mode 100644 index 9d53875b93..0000000000 --- a/arch/arm/cpu/arm926ejs/davinci/et1011c.c +++ /dev/null @@ -1,42 +0,0 @@ -/* - * LSI ET1011C PHY Driver for TI DaVinci(TMS320DM6467) board. - * - * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <net.h> -#include <miiphy.h> -#include <asm/arch/emac_defs.h> -#include "../../../../../drivers/net/davinci_emac.h" - -#ifdef CONFIG_DRIVER_TI_EMAC - -#ifdef CONFIG_CMD_NET - -/* LSI PHYSICAL LAYER TRANSCEIVER ET1011C */ - -#define MII_PHY_CONFIG_REG 22 - -/* PHY Config bits */ -#define PHY_SYS_CLK_EN (1 << 4) - -int et1011c_get_link_speed(int phy_addr) -{ - u_int16_t data; - - if (davinci_eth_phy_read(phy_addr, MII_STATUS_REG, &data) && (data & 0x04)) { - davinci_eth_phy_read(phy_addr, MII_PHY_CONFIG_REG, &data); - /* Enable 125MHz clock sourced from PHY */ - davinci_eth_phy_write(phy_addr, MII_PHY_CONFIG_REG, - data | PHY_SYS_CLK_EN); - return (1); - } - return (0); -} - -#endif /* CONFIG_CMD_NET */ - -#endif /* CONFIG_DRIVER_ETHER */ diff --git a/arch/arm/cpu/arm926ejs/davinci/ksz8873.c b/arch/arm/cpu/arm926ejs/davinci/ksz8873.c deleted file mode 100644 index 4af5dd2135..0000000000 --- a/arch/arm/cpu/arm926ejs/davinci/ksz8873.c +++ /dev/null @@ -1,53 +0,0 @@ -/* - * Micrel KSZ8873 PHY Driver for TI DaVinci - * (TMS320DM644x) based boards. - * - * Copyright (C) 2011 Heiko Schocher <hsdenx.de> - * - * based on: - * National Semiconductor DP83848 PHY Driver for TI DaVinci - * (TMS320DM644x) based boards. - * - * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> - * - * -------------------------------------------------------- - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <miiphy.h> -#include <net.h> -#include <asm/arch/emac_defs.h> -#include <asm/io.h> -#include "../../../../../drivers/net/davinci_emac.h" - -int ksz8873_is_phy_connected(int phy_addr) -{ - u_int16_t dummy; - - return davinci_eth_phy_read(phy_addr, MII_PHYSID1, &dummy); -} - -int ksz8873_get_link_speed(int phy_addr) -{ - emac_regs *emac = (emac_regs *)EMAC_BASE_ADDR; - - /* we always have a link to the switch, 100 FD */ - writel((EMAC_MACCONTROL_MIIEN_ENABLE | - EMAC_MACCONTROL_FULLDUPLEX_ENABLE), - &emac->MACCONTROL); - return 1; -} - - -int ksz8873_init_phy(int phy_addr) -{ - return 1; -} - - -int ksz8873_auto_negotiate(int phy_addr) -{ - return dp83848_get_link_speed(phy_addr); -} diff --git a/arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S b/arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S deleted file mode 100644 index e91623497c..0000000000 --- a/arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S +++ /dev/null @@ -1,693 +0,0 @@ -/* - * Low-level board setup code for TI DaVinci SoC based boards. - * - * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> - * - * Partially based on TI sources, original copyrights follow: - */ - -/* - * Board specific setup info - * - * (C) Copyright 2003 - * Texas Instruments, <www.ti.com> - * Kshitij Gupta <Kshitij@ti.com> - * - * Modified for OMAP 1610 H2 board by Nishant Kamat, Jan 2004 - * - * Modified for OMAP 5912 OSK board by Rishi Bhattacharya, Apr 2004 - * - * Modified for DV-EVM board by Rishi Bhattacharya, Apr 2005 - * - * Modified for DV-EVM board by Swaminathan S, Nov 2005 - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <config.h> - -#define MDSTAT_STATE 0x3f - -.globl lowlevel_init -lowlevel_init: -#ifdef CONFIG_SOC_DM644X - - /*-------------------------------------------------------* - * Mask all IRQs by setting all bits in the EINT default * - *-------------------------------------------------------*/ - mov r1, $0 - ldr r0, =EINT_ENABLE0 - str r1, [r0] - ldr r0, =EINT_ENABLE1 - str r1, [r0] - - /*------------------------------------------------------* - * Put the GEM in reset * - *------------------------------------------------------*/ - - /* Put the GEM in reset */ - ldr r8, PSC_GEM_FLAG_CLEAR - ldr r6, MDCTL_GEM - ldr r7, [r6] - and r7, r7, r8 - str r7, [r6] - - /* Enable the Power Domain Transition Command */ - ldr r6, PTCMD - ldr r7, [r6] - orr r7, r7, $0x02 - str r7, [r6] - - /* Check for Transition Complete(PTSTAT) */ -checkStatClkStopGem: - ldr r6, PTSTAT - ldr r7, [r6] - ands r7, r7, $0x02 - bne checkStatClkStopGem - - /* Check for GEM Reset Completion */ -checkGemStatClkStop: - ldr r6, MDSTAT_GEM - ldr r7, [r6] - ands r7, r7, $0x100 - bne checkGemStatClkStop - - /* Do this for enabling a WDT initiated reset this is a workaround - for a chip bug. Not required under normal situations */ - ldr r6, P1394 - mov r10, $0 - str r10, [r6] - - /*------------------------------------------------------* - * Enable L1 & L2 Memories in Fast mode * - *------------------------------------------------------*/ - ldr r6, DFT_ENABLE - mov r10, $0x01 - str r10, [r6] - - ldr r6, MMARG_BRF0 - ldr r10, MMARG_BRF0_VAL - str r10, [r6] - - ldr r6, DFT_ENABLE - mov r10, $0 - str r10, [r6] - - /*------------------------------------------------------* - * DDR2 PLL Initialization * - *------------------------------------------------------*/ - - /* Select the Clock Mode Depending on the Value written in the Boot Table by the run script */ - mov r10, $0 - ldr r6, PLL2_CTL - ldr r7, PLL_CLKSRC_MASK - ldr r8, [r6] - and r8, r8, r7 - mov r9, r10, lsl $8 - orr r8, r8, r9 - str r8, [r6] - - /* Select the PLLEN source */ - ldr r7, PLL_ENSRC_MASK - and r8, r8, r7 - str r8, [r6] - - /* Bypass the PLL */ - ldr r7, PLL_BYPASS_MASK - and r8, r8, r7 - str r8, [r6] - - /* Wait for few cycles to allow PLLEN Mux switch properly to bypass Clock */ - mov r10, $0x20 -WaitPPL2Loop: - subs r10, r10, $1 - bne WaitPPL2Loop - - /* Reset the PLL */ - ldr r7, PLL_RESET_MASK - and r8, r8, r7 - str r8, [r6] - - /* Power up the PLL */ - ldr r7, PLL_PWRUP_MASK - and r8, r8, r7 - str r8, [r6] - - /* Enable the PLL from Disable Mode */ - ldr r7, PLL_DISABLE_ENABLE_MASK - and r8, r8, r7 - str r8, [r6] - - /* Program the PLL Multiplier */ - ldr r6, PLL2_PLLM - mov r2, $0x17 /* 162 MHz */ - str r2, [r6] - - /* Program the PLL2 Divisor Value */ - ldr r6, PLL2_DIV2 - mov r3, $0x01 - str r3, [r6] - - /* Program the PLL2 Divisor Value */ - ldr r6, PLL2_DIV1 - mov r4, $0x0b /* 54 MHz */ - str r4, [r6] - - /* PLL2 DIV2 MMR */ - ldr r8, PLL2_DIV_MASK - ldr r6, PLL2_DIV2 - ldr r9, [r6] - and r8, r8, r9 - mov r9, $0x01 - mov r9, r9, lsl $15 - orr r8, r8, r9 - str r8, [r6] - - /* Program the GOSET bit to take new divider values */ - ldr r6, PLL2_PLLCMD - ldr r7, [r6] - orr r7, r7, $0x01 - str r7, [r6] - - /* Wait for Done */ - ldr r6, PLL2_PLLSTAT -doneLoop_0: - ldr r7, [r6] - ands r7, r7, $0x01 - bne doneLoop_0 - - /* PLL2 DIV1 MMR */ - ldr r8, PLL2_DIV_MASK - ldr r6, PLL2_DIV1 - ldr r9, [r6] - and r8, r8, r9 - mov r9, $0x01 - mov r9, r9, lsl $15 - orr r8, r8, r9 - str r8, [r6] - - /* Program the GOSET bit to take new divider values */ - ldr r6, PLL2_PLLCMD - ldr r7, [r6] - orr r7, r7, $0x01 - str r7, [r6] - - /* Wait for Done */ - ldr r6, PLL2_PLLSTAT -doneLoop: - ldr r7, [r6] - ands r7, r7, $0x01 - bne doneLoop - - /* Wait for PLL to Reset Properly */ - mov r10, $0x218 -ResetPPL2Loop: - subs r10, r10, $1 - bne ResetPPL2Loop - - /* Bring PLL out of Reset */ - ldr r6, PLL2_CTL - ldr r8, [r6] - orr r8, r8, $0x08 - str r8, [r6] - - /* Wait for PLL to Lock */ - ldr r10, PLL_LOCK_COUNT -PLL2Lock: - subs r10, r10, $1 - bne PLL2Lock - - /* Enable the PLL */ - ldr r6, PLL2_CTL - ldr r8, [r6] - orr r8, r8, $0x01 - str r8, [r6] - - /*------------------------------------------------------* - * Issue Soft Reset to DDR Module * - *------------------------------------------------------*/ - - /* Shut down the DDR2 LPSC Module */ - ldr r8, PSC_FLAG_CLEAR - ldr r6, MDCTL_DDR2 - ldr r7, [r6] - and r7, r7, r8 - orr r7, r7, $0x03 - str r7, [r6] - - /* Enable the Power Domain Transition Command */ - ldr r6, PTCMD - ldr r7, [r6] - orr r7, r7, $0x01 - str r7, [r6] - - /* Check for Transition Complete(PTSTAT) */ -checkStatClkStop: - ldr r6, PTSTAT - ldr r7, [r6] - ands r7, r7, $0x01 - bne checkStatClkStop - - /* Check for DDR2 Controller Enable Completion */ -checkDDRStatClkStop: - ldr r6, MDSTAT_DDR2 - ldr r7, [r6] - and r7, r7, $MDSTAT_STATE - cmp r7, $0x03 - bne checkDDRStatClkStop - - /*------------------------------------------------------* - * Program DDR2 MMRs for 162MHz Setting * - *------------------------------------------------------*/ - - /* Program PHY Control Register */ - ldr r6, DDRCTL - ldr r7, DDRCTL_VAL - str r7, [r6] - - /* Program SDRAM Bank Config Register */ - ldr r6, SDCFG - ldr r7, SDCFG_VAL - str r7, [r6] - - /* Program SDRAM TIM-0 Config Register */ - ldr r6, SDTIM0 - ldr r7, SDTIM0_VAL_162MHz - str r7, [r6] - - /* Program SDRAM TIM-1 Config Register */ - ldr r6, SDTIM1 - ldr r7, SDTIM1_VAL_162MHz - str r7, [r6] - - /* Program the SDRAM Bank Config Control Register */ - ldr r10, MASK_VAL - ldr r8, SDCFG - ldr r9, SDCFG_VAL - and r9, r9, r10 - str r9, [r8] - - /* Program SDRAM SDREF Config Register */ - ldr r6, SDREF - ldr r7, SDREF_VAL - str r7, [r6] - - /*------------------------------------------------------* - * Issue Soft Reset to DDR Module * - *------------------------------------------------------*/ - - /* Issue a Dummy DDR2 read/write */ - ldr r8, DDR2_START_ADDR - ldr r7, DUMMY_VAL - str r7, [r8] - ldr r7, [r8] - - /* Shut down the DDR2 LPSC Module */ - ldr r8, PSC_FLAG_CLEAR - ldr r6, MDCTL_DDR2 - ldr r7, [r6] - and r7, r7, r8 - orr r7, r7, $0x01 - str r7, [r6] - - /* Enable the Power Domain Transition Command */ - ldr r6, PTCMD - ldr r7, [r6] - orr r7, r7, $0x01 - str r7, [r6] - - /* Check for Transition Complete(PTSTAT) */ -checkStatClkStop2: - ldr r6, PTSTAT - ldr r7, [r6] - ands r7, r7, $0x01 - bne checkStatClkStop2 - - /* Check for DDR2 Controller Enable Completion */ -checkDDRStatClkStop2: - ldr r6, MDSTAT_DDR2 - ldr r7, [r6] - and r7, r7, $MDSTAT_STATE - cmp r7, $0x01 - bne checkDDRStatClkStop2 - - /*------------------------------------------------------* - * Turn DDR2 Controller Clocks On * - *------------------------------------------------------*/ - - /* Enable the DDR2 LPSC Module */ - ldr r6, MDCTL_DDR2 - ldr r7, [r6] - orr r7, r7, $0x03 - str r7, [r6] - - /* Enable the Power Domain Transition Command */ - ldr r6, PTCMD - ldr r7, [r6] - orr r7, r7, $0x01 - str r7, [r6] - - /* Check for Transition Complete(PTSTAT) */ -checkStatClkEn2: - ldr r6, PTSTAT - ldr r7, [r6] - ands r7, r7, $0x01 - bne checkStatClkEn2 - - /* Check for DDR2 Controller Enable Completion */ -checkDDRStatClkEn2: - ldr r6, MDSTAT_DDR2 - ldr r7, [r6] - and r7, r7, $MDSTAT_STATE - cmp r7, $0x03 - bne checkDDRStatClkEn2 - - /* DDR Writes and Reads */ - ldr r6, CFGTEST - mov r3, $0x01 - str r3, [r6] - - /*------------------------------------------------------* - * System PLL Initialization * - *------------------------------------------------------*/ - - /* Select the Clock Mode Depending on the Value written in the Boot Table by the run script */ - mov r2, $0 - ldr r6, PLL1_CTL - ldr r7, PLL_CLKSRC_MASK - ldr r8, [r6] - and r8, r8, r7 - mov r9, r2, lsl $8 - orr r8, r8, r9 - str r8, [r6] - - /* Select the PLLEN source */ - ldr r7, PLL_ENSRC_MASK - and r8, r8, r7 - str r8, [r6] - - /* Bypass the PLL */ - ldr r7, PLL_BYPASS_MASK - and r8, r8, r7 - str r8, [r6] - - /* Wait for few cycles to allow PLLEN Mux switch properly to bypass Clock */ - mov r10, $0x20 - -WaitLoop: - subs r10, r10, $1 - bne WaitLoop - - /* Reset the PLL */ - ldr r7, PLL_RESET_MASK - and r8, r8, r7 - str r8, [r6] - - /* Disable the PLL */ - orr r8, r8, $0x10 - str r8, [r6] - - /* Power up the PLL */ - ldr r7, PLL_PWRUP_MASK - and r8, r8, r7 - str r8, [r6] - - /* Enable the PLL from Disable Mode */ - ldr r7, PLL_DISABLE_ENABLE_MASK - and r8, r8, r7 - str r8, [r6] - - /* Program the PLL Multiplier */ - ldr r6, PLL1_PLLM - mov r3, $0x15 /* For 594MHz */ - str r3, [r6] - - /* Wait for PLL to Reset Properly */ - mov r10, $0xff - -ResetLoop: - subs r10, r10, $1 - bne ResetLoop - - /* Bring PLL out of Reset */ - ldr r6, PLL1_CTL - orr r8, r8, $0x08 - str r8, [r6] - - /* Wait for PLL to Lock */ - ldr r10, PLL_LOCK_COUNT - -PLL1Lock: - subs r10, r10, $1 - bne PLL1Lock - - /* Enable the PLL */ - orr r8, r8, $0x01 - str r8, [r6] - - nop - nop - nop - nop - - /*------------------------------------------------------* - * AEMIF configuration for NOR Flash (double check) * - *------------------------------------------------------*/ - ldr r0, _PINMUX0 - ldr r1, _DEV_SETTING - str r1, [r0] - - ldr r0, WAITCFG - ldr r1, WAITCFG_VAL - ldr r2, [r0] - orr r2, r2, r1 - str r2, [r0] - - ldr r0, ACFG3 - ldr r1, ACFG3_VAL - ldr r2, [r0] - and r1, r2, r1 - str r1, [r0] - - ldr r0, ACFG4 - ldr r1, ACFG4_VAL - ldr r2, [r0] - and r1, r2, r1 - str r1, [r0] - - ldr r0, ACFG5 - ldr r1, ACFG5_VAL - ldr r2, [r0] - and r1, r2, r1 - str r1, [r0] - - /*--------------------------------------* - * VTP manual Calibration * - *--------------------------------------*/ - ldr r0, VTPIOCR - ldr r1, VTP_MMR0 - str r1, [r0] - - ldr r0, VTPIOCR - ldr r1, VTP_MMR1 - str r1, [r0] - - /* Wait for 33 VTP CLK cycles. VRP operates at 27 MHz */ - ldr r10, VTP_LOCK_COUNT -VTPLock: - subs r10, r10, $1 - bne VTPLock - - ldr r6, DFT_ENABLE - mov r10, $0x01 - str r10, [r6] - - ldr r6, DDRVTPR - ldr r7, [r6] - mov r8, r7, LSL #32-10 - mov r8, r8, LSR #32-10 /* grab low 10 bits */ - ldr r7, VTP_RECAL - orr r8, r7, r8 - ldr r7, VTP_EN - orr r8, r7, r8 - str r8, [r0] - - - /* Wait for 33 VTP CLK cycles. VRP operates at 27 MHz */ - ldr r10, VTP_LOCK_COUNT -VTP1Lock: - subs r10, r10, $1 - bne VTP1Lock - - ldr r1, [r0] - ldr r2, VTP_MASK - and r2, r1, r2 - str r2, [r0] - - ldr r6, DFT_ENABLE - mov r10, $0 - str r10, [r6] - - /* - * Call board-specific lowlevel init. - * That MUST be present and THAT returns - * back to arch calling code with "mov pc, lr." - */ - b dv_board_init - -.ltorg - -_PINMUX0: - .word 0x01c40000 /* Device Configuration Registers */ -_PINMUX1: - .word 0x01c40004 /* Device Configuration Registers */ - -_DEV_SETTING: - .word 0x00000c1f - -WAITCFG: - .word 0x01e00004 -WAITCFG_VAL: - .word 0 -ACFG3: - .word 0x01e00014 -ACFG3_VAL: - .word 0x3ffffffd -ACFG4: - .word 0x01e00018 -ACFG4_VAL: - .word 0x3ffffffd -ACFG5: - .word 0x01e0001c -ACFG5_VAL: - .word 0x3ffffffd - -MDCTL_DDR2: - .word 0x01c41a34 -MDSTAT_DDR2: - .word 0x01c41834 - -PTCMD: - .word 0x01c41120 -PTSTAT: - .word 0x01c41128 - -EINT_ENABLE0: - .word 0x01c48018 -EINT_ENABLE1: - .word 0x01c4801c - -PSC_FLAG_CLEAR: - .word 0xffffffe0 -PSC_GEM_FLAG_CLEAR: - .word 0xfffffeff - -/* DDR2 MMR & CONFIGURATION VALUES, 162 MHZ clock */ -DDRCTL: - .word 0x200000e4 -DDRCTL_VAL: - .word 0x50006405 -SDREF: - .word 0x2000000c -SDREF_VAL: - .word 0x000005c3 -SDCFG: - .word 0x20000008 -SDCFG_VAL: -#ifdef DDR_4BANKS - .word 0x00178622 -#elif defined DDR_8BANKS - .word 0x00178632 -#else -#error "Unknown DDR configuration!!!" -#endif -SDTIM0: - .word 0x20000010 -SDTIM0_VAL_162MHz: - .word 0x28923211 -SDTIM1: - .word 0x20000014 -SDTIM1_VAL_162MHz: - .word 0x0016c722 -VTPIOCR: - .word 0x200000f0 /* VTP IO Control register */ -DDRVTPR: - .word 0x01c42030 /* DDR VPTR MMR */ -VTP_MMR0: - .word 0x201f -VTP_MMR1: - .word 0xa01f -DFT_ENABLE: - .word 0x01c4004c -VTP_LOCK_COUNT: - .word 0x5b0 -VTP_MASK: - .word 0xffffdfff -VTP_RECAL: - .word 0x08000 -VTP_EN: - .word 0x02000 -CFGTEST: - .word 0x80010000 -MASK_VAL: - .word 0x00000fff - -/* GEM Power Up & LPSC Control Register */ -MDCTL_GEM: - .word 0x01c41a9c -MDSTAT_GEM: - .word 0x01c4189c - -/* For WDT reset chip bug */ -P1394: - .word 0x01c41a20 - -PLL_CLKSRC_MASK: - .word 0xfffffeff /* Mask the Clock Mode bit */ -PLL_ENSRC_MASK: - .word 0xffffffdf /* Select the PLLEN source */ -PLL_BYPASS_MASK: - .word 0xfffffffe /* Put the PLL in BYPASS */ -PLL_RESET_MASK: - .word 0xfffffff7 /* Put the PLL in Reset Mode */ -PLL_PWRUP_MASK: - .word 0xfffffffd /* PLL Power up Mask Bit */ -PLL_DISABLE_ENABLE_MASK: - .word 0xffffffef /* Enable the PLL from Disable */ -PLL_LOCK_COUNT: - .word 0x2000 - -/* PLL1-SYSTEM PLL MMRs */ -PLL1_CTL: - .word 0x01c40900 -PLL1_PLLM: - .word 0x01c40910 - -/* PLL2-SYSTEM PLL MMRs */ -PLL2_CTL: - .word 0x01c40d00 -PLL2_PLLM: - .word 0x01c40d10 -PLL2_DIV1: - .word 0x01c40d18 -PLL2_DIV2: - .word 0x01c40d1c -PLL2_PLLCMD: - .word 0x01c40d38 -PLL2_PLLSTAT: - .word 0x01c40d3c -PLL2_DIV_MASK: - .word 0xffff7fff - -MMARG_BRF0: - .word 0x01c42010 /* BRF margin mode 0 (R/W)*/ -MMARG_BRF0_VAL: - .word 0x00444400 - -DDR2_START_ADDR: - .word 0x80000000 -DUMMY_VAL: - .word 0xa55aa55a -#else /* CONFIG_SOC_DM644X */ - mov pc, lr -#endif diff --git a/arch/arm/cpu/arm926ejs/davinci/lxt972.c b/arch/arm/cpu/arm926ejs/davinci/lxt972.c deleted file mode 100644 index c482fd9378..0000000000 --- a/arch/arm/cpu/arm926ejs/davinci/lxt972.c +++ /dev/null @@ -1,113 +0,0 @@ -/* - * Intel LXT971/LXT972 PHY Driver for TI DaVinci - * (TMS320DM644x) based boards. - * - * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> - * - * -------------------------------------------------------- - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <net.h> -#include <miiphy.h> -#include <lxt971a.h> -#include <asm/arch/emac_defs.h> -#include "../../../../../drivers/net/davinci_emac.h" - -#ifdef CONFIG_DRIVER_TI_EMAC - -#ifdef CONFIG_CMD_NET - -int lxt972_is_phy_connected(int phy_addr) -{ - u_int16_t id1, id2; - - if (!davinci_eth_phy_read(phy_addr, MII_PHYSID1, &id1)) - return(0); - if (!davinci_eth_phy_read(phy_addr, MII_PHYSID2, &id2)) - return(0); - - if ((id1 == (0x0013)) && ((id2 & 0xfff0) == 0x78e0)) - return(1); - - return(0); -} - -int lxt972_get_link_speed(int phy_addr) -{ - u_int16_t stat1, tmp; - volatile emac_regs *emac = (emac_regs *)EMAC_BASE_ADDR; - - if (!davinci_eth_phy_read(phy_addr, PHY_LXT971_STAT2, &stat1)) - return(0); - - if (!(stat1 & PHY_LXT971_STAT2_LINK)) /* link up? */ - return(0); - - if (!davinci_eth_phy_read(phy_addr, PHY_LXT971_DIG_CFG, &tmp)) - return(0); - - tmp |= PHY_LXT971_DIG_CFG_MII_DRIVE; - - davinci_eth_phy_write(phy_addr, PHY_LXT971_DIG_CFG, tmp); - /* Read back */ - if (!davinci_eth_phy_read(phy_addr, PHY_LXT971_DIG_CFG, &tmp)) - return(0); - - /* Speed doesn't matter, there is no setting for it in EMAC... */ - if (stat1 & PHY_LXT971_STAT2_DUPLEX_MODE) { - /* set DM644x EMAC for Full Duplex */ - emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE | - EMAC_MACCONTROL_FULLDUPLEX_ENABLE; - } else { - /*set DM644x EMAC for Half Duplex */ - emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE; - } - - return(1); -} - - -int lxt972_init_phy(int phy_addr) -{ - int ret = 1; - - if (!lxt972_get_link_speed(phy_addr)) { - /* Try another time */ - ret = lxt972_get_link_speed(phy_addr); - } - - /* Disable PHY Interrupts */ - davinci_eth_phy_write(phy_addr, PHY_LXT971_INT_ENABLE, 0); - - return(ret); -} - - -int lxt972_auto_negotiate(int phy_addr) -{ - u_int16_t tmp; - - if (!davinci_eth_phy_read(phy_addr, MII_BMCR, &tmp)) - return(0); - - /* Restart Auto_negotiation */ - tmp |= BMCR_ANRESTART; - davinci_eth_phy_write(phy_addr, MII_BMCR, tmp); - - /*check AutoNegotiate complete */ - udelay (10000); - if (!davinci_eth_phy_read(phy_addr, MII_BMSR, &tmp)) - return(0); - - if (!(tmp & BMSR_ANEGCOMPLETE)) - return(0); - - return (lxt972_get_link_speed(phy_addr)); -} - -#endif /* CONFIG_CMD_NET */ - -#endif /* CONFIG_DRIVER_ETHER */ diff --git a/arch/arm/cpu/arm926ejs/davinci/misc.c b/arch/arm/cpu/arm926ejs/davinci/misc.c deleted file mode 100644 index e18bdfc729..0000000000 --- a/arch/arm/cpu/arm926ejs/davinci/misc.c +++ /dev/null @@ -1,138 +0,0 @@ -/* - * Miscelaneous DaVinci functions. - * - * Copyright (C) 2009 Nick Thompson, GE Fanuc Ltd, <nick.thompson@gefanuc.com> - * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> - * Copyright (C) 2008 Lyrtech <www.lyrtech.com> - * Copyright (C) 2004 Texas Instruments. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <i2c.h> -#include <net.h> -#include <asm/arch/hardware.h> -#include <asm/io.h> -#include <asm/arch/davinci_misc.h> - -DECLARE_GLOBAL_DATA_PTR; - -#ifndef CONFIG_SPL_BUILD -int dram_init(void) -{ - /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size( - (void *)CONFIG_SYS_SDRAM_BASE, - CONFIG_MAX_RAM_BANK_SIZE); - return 0; -} - -void dram_init_banksize(void) -{ - gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; - gd->bd->bi_dram[0].size = gd->ram_size; -} -#endif - -#ifdef CONFIG_DRIVER_TI_EMAC -/* - * Read ethernet MAC address from EEPROM for DVEVM compatible boards. - * Returns 1 if found, 0 otherwise. - */ -int dvevm_read_mac_address(uint8_t *buf) -{ -#ifdef CONFIG_SYS_I2C_EEPROM_ADDR - /* Read MAC address. */ - if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0x7F00, - CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (uint8_t *) &buf[0], 6)) - goto i2cerr; - - /* Check that MAC address is valid. */ - if (!is_valid_ether_addr(buf)) - goto err; - - return 1; /* Found */ - -i2cerr: - printf("Read from EEPROM @ 0x%02x failed\n", - CONFIG_SYS_I2C_EEPROM_ADDR); -err: -#endif /* CONFIG_SYS_I2C_EEPROM_ADDR */ - - return 0; -} - -/* - * Set the mii mode as MII or RMII - */ -#if defined(CONFIG_SOC_DA8XX) -void davinci_emac_mii_mode_sel(int mode_sel) -{ - int val; - - val = readl(&davinci_syscfg_regs->cfgchip3); - if (mode_sel == 0) - val &= ~(1 << 8); - else - val |= (1 << 8); - writel(val, &davinci_syscfg_regs->cfgchip3); -} -#endif -/* - * If there is no MAC address in the environment, then it will be initialized - * (silently) from the value in the EEPROM. - */ -void davinci_sync_env_enetaddr(uint8_t *rom_enetaddr) -{ - uint8_t env_enetaddr[6]; - int ret; - - ret = eth_getenv_enetaddr_by_index("eth", 0, env_enetaddr); - if (!ret) { - /* - * There is no MAC address in the environment, so we - * initialize it from the value in the EEPROM. - */ - debug("### Setting environment from EEPROM MAC address = " - "\"%pM\"\n", - env_enetaddr); - ret = !eth_setenv_enetaddr("ethaddr", rom_enetaddr); - } - if (!ret) - printf("Failed to set mac address from EEPROM: %d\n", ret); -} -#endif /* CONFIG_DRIVER_TI_EMAC */ - -#if defined(CONFIG_SOC_DA8XX) -#ifndef CONFIG_USE_IRQ -void irq_init(void) -{ - /* - * Mask all IRQs by clearing the global enable and setting - * the enable clear for all the 90 interrupts. - */ - writel(0, &davinci_aintc_regs->ger); - - writel(0, &davinci_aintc_regs->hier); - - writel(0xffffffff, &davinci_aintc_regs->ecr1); - writel(0xffffffff, &davinci_aintc_regs->ecr2); - writel(0xffffffff, &davinci_aintc_regs->ecr3); -} -#endif - -/* - * Enable PSC for various peripherals. - */ -int da8xx_configure_lpsc_items(const struct lpsc_resource *item, - const int n_items) -{ - int i; - - for (i = 0; i < n_items; i++) - lpsc_on(item[i].lpsc_no); - - return 0; -} -#endif diff --git a/arch/arm/cpu/arm926ejs/davinci/pinmux.c b/arch/arm/cpu/arm926ejs/davinci/pinmux.c deleted file mode 100644 index e9d8c87cc8..0000000000 --- a/arch/arm/cpu/arm926ejs/davinci/pinmux.c +++ /dev/null @@ -1,90 +0,0 @@ -/* - * DaVinci pinmux functions. - * - * Copyright (C) 2009 Nick Thompson, GE Fanuc Ltd, <nick.thompson@gefanuc.com> - * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> - * Copyright (C) 2008 Lyrtech <www.lyrtech.com> - * Copyright (C) 2004 Texas Instruments. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/arch/hardware.h> -#include <asm/io.h> -#include <asm/arch/davinci_misc.h> - -/* - * Change the setting of a pin multiplexer field. - * - * Takes an array of pinmux settings similar to: - * - * struct pinmux_config uart_pins[] = { - * { &davinci_syscfg_regs->pinmux[8], 2, 7 }, - * { &davinci_syscfg_regs->pinmux[9], 2, 0 } - * }; - * - * Stepping through the array, each pinmux[n] register has the given value - * set in the pin mux field specified. - * - * The number of pins in the array must be passed (ARRAY_SIZE can provide - * this value conveniently). - * - * Returns 0 if all field numbers and values are in the correct range, - * else returns -1. - */ -int davinci_configure_pin_mux(const struct pinmux_config *pins, - const int n_pins) -{ - int i; - - /* check for invalid pinmux values */ - for (i = 0; i < n_pins; i++) { - if (pins[i].field >= PIN_MUX_NUM_FIELDS || - (pins[i].value & ~PIN_MUX_FIELD_MASK) != 0) - return -1; - } - - /* configure the pinmuxes */ - for (i = 0; i < n_pins; i++) { - const int offset = pins[i].field * PIN_MUX_FIELD_SIZE; - const unsigned int value = pins[i].value << offset; - const unsigned int mask = PIN_MUX_FIELD_MASK << offset; - const dv_reg *mux = pins[i].mux; - - writel(value | (readl(mux) & (~mask)), mux); - } - - return 0; -} - -/* - * Configure multiple pinmux resources. - * - * Takes an pinmux_resource array of pinmux_config and pin counts: - * - * const struct pinmux_resource pinmuxes[] = { - * PINMUX_ITEM(uart_pins), - * PINMUX_ITEM(i2c_pins), - * }; - * - * The number of items in the array must be passed (ARRAY_SIZE can provide - * this value conveniently). - * - * Each item entry is configured in the defined order. If configuration - * of any item fails, -1 is returned and none of the following items are - * configured. On success, 0 is returned. - */ -int davinci_configure_pin_mux_items(const struct pinmux_resource *item, - const int n_items) -{ - int i; - - for (i = 0; i < n_items; i++) { - if (davinci_configure_pin_mux(item[i].pins, - item[i].n_pins) != 0) - return -1; - } - - return 0; -} diff --git a/arch/arm/cpu/arm926ejs/davinci/psc.c b/arch/arm/cpu/arm926ejs/davinci/psc.c deleted file mode 100644 index 8d99e2e997..0000000000 --- a/arch/arm/cpu/arm926ejs/davinci/psc.c +++ /dev/null @@ -1,160 +0,0 @@ -/* - * Power and Sleep Controller (PSC) functions. - * - * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> - * Copyright (C) 2008 Lyrtech <www.lyrtech.com> - * Copyright (C) 2004 Texas Instruments. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/arch/hardware.h> -#include <asm/io.h> - -/* - * The PSC manages three inputs to a "module" which may be a peripheral or - * CPU. Those inputs are the module's: clock; reset signal; and sometimes - * its power domain. For our purposes, we only care whether clock and power - * are active, and the module is out of reset. - * - * DaVinci chips may include two separate power domains: "Always On" and "DSP". - * Chips without a DSP generally have only one domain. - * - * The "Always On" power domain is always on when the chip is on, and is - * powered by the VDD pins (on DM644X). The majority of DaVinci modules - * lie within the "Always On" power domain. - * - * A separate domain called the "DSP" domain houses the C64x+ and other video - * hardware such as VICP. In some chips, the "DSP" domain is not always on. - * The "DSP" power domain is powered by the CVDDDSP pins (on DM644X). - */ - -/* Works on Always On power domain only (no PD argument) */ -static void lpsc_transition(unsigned int id, unsigned int state) -{ - dv_reg_p mdstat, mdctl, ptstat, ptcmd; -#ifdef CONFIG_SOC_DA8XX - struct davinci_psc_regs *psc_regs; -#endif - -#ifndef CONFIG_SOC_DA8XX - if (id >= DAVINCI_LPSC_GEM) - return; /* Don't work on DSP Power Domain */ - - mdstat = REG_P(PSC_MDSTAT_BASE + (id * 4)); - mdctl = REG_P(PSC_MDCTL_BASE + (id * 4)); - ptstat = REG_P(PSC_PTSTAT); - ptcmd = REG_P(PSC_PTCMD); -#else - if (id < DAVINCI_LPSC_PSC1_BASE) { - if (id >= PSC_PSC0_MODULE_ID_CNT) - return; - psc_regs = davinci_psc0_regs; - mdstat = &psc_regs->psc0.mdstat[id]; - mdctl = &psc_regs->psc0.mdctl[id]; - } else { - id -= DAVINCI_LPSC_PSC1_BASE; - if (id >= PSC_PSC1_MODULE_ID_CNT) - return; - psc_regs = davinci_psc1_regs; - mdstat = &psc_regs->psc1.mdstat[id]; - mdctl = &psc_regs->psc1.mdctl[id]; - } - ptstat = &psc_regs->ptstat; - ptcmd = &psc_regs->ptcmd; -#endif - - while (readl(ptstat) & 0x01) - continue; - - if ((readl(mdstat) & PSC_MDSTAT_STATE) == state) - return; /* Already in that state */ - - writel((readl(mdctl) & ~PSC_MDCTL_NEXT) | state, mdctl); - - switch (id) { -#ifdef CONFIG_SOC_DM644X - /* Special treatment for some modules as for sprue14 p.7.4.2 */ - case DAVINCI_LPSC_VPSSSLV: - case DAVINCI_LPSC_EMAC: - case DAVINCI_LPSC_EMAC_WRAPPER: - case DAVINCI_LPSC_MDIO: - case DAVINCI_LPSC_USB: - case DAVINCI_LPSC_ATA: - case DAVINCI_LPSC_VLYNQ: - case DAVINCI_LPSC_UHPI: - case DAVINCI_LPSC_DDR_EMIF: - case DAVINCI_LPSC_AEMIF: - case DAVINCI_LPSC_MMC_SD: - case DAVINCI_LPSC_MEMSTICK: - case DAVINCI_LPSC_McBSP: - case DAVINCI_LPSC_GPIO: - writel(readl(mdctl) | 0x200, mdctl); - break; -#endif - } - - writel(0x01, ptcmd); - - while (readl(ptstat) & 0x01) - continue; - while ((readl(mdstat) & PSC_MDSTAT_STATE) != state) - continue; -} - -void lpsc_on(unsigned int id) -{ - lpsc_transition(id, 0x03); -} - -void lpsc_syncreset(unsigned int id) -{ - lpsc_transition(id, 0x01); -} - -void lpsc_disable(unsigned int id) -{ - lpsc_transition(id, 0x0); -} - -/* Not all DaVinci chips have a DSP power domain. */ -#ifdef CONFIG_SOC_DM644X - -/* If DSPLINK is used, we don't want U-Boot to power on the DSP. */ -#if !defined(CONFIG_SYS_USE_DSPLINK) -void dsp_on(void) -{ - int i; - - if (REG(PSC_PDSTAT1) & 0x1f) - return; /* Already on */ - - REG(PSC_GBLCTL) |= 0x01; - REG(PSC_PDCTL1) |= 0x01; - REG(PSC_PDCTL1) &= ~0x100; - REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) |= 0x03; - REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) &= 0xfffffeff; - REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) |= 0x03; - REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) &= 0xfffffeff; - REG(PSC_PTCMD) = 0x02; - - for (i = 0; i < 100; i++) { - if (REG(PSC_EPCPR) & 0x02) - break; - } - - REG(PSC_CHP_SHRTSW) = 0x01; - REG(PSC_PDCTL1) |= 0x100; - REG(PSC_EPCCR) = 0x02; - - for (i = 0; i < 100; i++) { - if (!(REG(PSC_PTSTAT) & 0x02)) - break; - } - - REG(PSC_GBLCTL) &= ~0x1f; -} -#endif /* CONFIG_SYS_USE_DSPLINK */ - -#endif /* have a DSP */ diff --git a/arch/arm/cpu/arm926ejs/davinci/reset.c b/arch/arm/cpu/arm926ejs/davinci/reset.c deleted file mode 100644 index 6b0f15428a..0000000000 --- a/arch/arm/cpu/arm926ejs/davinci/reset.c +++ /dev/null @@ -1,32 +0,0 @@ -/* - * Processor reset using WDT. - * - * Copyright (C) 2012 Dmitry Bondar <bond@inmys.ru> - * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/timer_defs.h> -#include <asm/arch/hardware.h> - -void reset_cpu(unsigned long a) -{ - struct davinci_timer *const wdttimer = - (struct davinci_timer *)DAVINCI_WDOG_BASE; - writel(0x08, &wdttimer->tgcr); - writel(readl(&wdttimer->tgcr) | 0x03, &wdttimer->tgcr); - writel(0, &wdttimer->tim12); - writel(0, &wdttimer->tim34); - writel(0, &wdttimer->prd12); - writel(0, &wdttimer->prd34); - writel(readl(&wdttimer->tcr) | 0x40, &wdttimer->tcr); - writel(readl(&wdttimer->wdtcr) | 0x4000, &wdttimer->wdtcr); - writel(0xa5c64000, &wdttimer->wdtcr); - writel(0xda7e4000, &wdttimer->wdtcr); - writel(0x4000, &wdttimer->wdtcr); - while (1) - /*nothing*/; -} diff --git a/arch/arm/cpu/arm926ejs/davinci/spl.c b/arch/arm/cpu/arm926ejs/davinci/spl.c deleted file mode 100644 index 59b304efcb..0000000000 --- a/arch/arm/cpu/arm926ejs/davinci/spl.c +++ /dev/null @@ -1,80 +0,0 @@ -/* - * Copyright (C) 2011 - * Heiko Schocher, DENX Software Engineering, hs@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#include <common.h> -#include <config.h> -#include <spl.h> -#include <asm/u-boot.h> -#include <asm/utils.h> -#include <nand.h> -#include <asm/arch/dm365_lowlevel.h> -#include <ns16550.h> -#include <malloc.h> -#include <spi_flash.h> -#include <mmc.h> - -DECLARE_GLOBAL_DATA_PTR; - -#ifndef CONFIG_SPL_LIBCOMMON_SUPPORT -void puts(const char *str) -{ - while (*str) - putc(*str++); -} - -void putc(char c) -{ - if (c == '\n') - NS16550_putc((NS16550_t)(CONFIG_SYS_NS16550_COM1), '\r'); - - NS16550_putc((NS16550_t)(CONFIG_SYS_NS16550_COM1), c); -} -#endif /* CONFIG_SPL_LIBCOMMON_SUPPORT */ - -void board_init_f(ulong dummy) -{ - /* First, setup our stack pointer. */ - asm volatile("mov sp, %0\n" : : "r"(CONFIG_SPL_STACK)); - - /* Second, perform our low-level init. */ -#ifdef CONFIG_SOC_DM365 - dm36x_lowlevel_init(0); -#endif -#ifdef CONFIG_SOC_DA8XX - arch_cpu_init(); -#endif - - /* Third, we clear the BSS. */ - memset(__bss_start, 0, __bss_end - __bss_start); - - /* Finally, setup gd and move to the next step. */ - gd = &gdata; - board_init_r(NULL, 0); -} - -void spl_board_init(void) -{ - preloader_console_init(); -} - -u32 spl_boot_mode(void) -{ - return MMCSD_MODE_RAW; -} - -u32 spl_boot_device(void) -{ -#ifdef CONFIG_SPL_NAND_SIMPLE - return BOOT_DEVICE_NAND; -#elif defined(CONFIG_SPL_SPI_LOAD) - return BOOT_DEVICE_SPI; -#elif defined(CONFIG_SPL_MMC_LOAD) - return BOOT_DEVICE_MMC1; -#else - puts("Unknown boot device\n"); - hang(); -#endif -} diff --git a/arch/arm/cpu/arm926ejs/davinci/timer.c b/arch/arm/cpu/arm926ejs/davinci/timer.c deleted file mode 100644 index c7d0652e83..0000000000 --- a/arch/arm/cpu/arm926ejs/davinci/timer.c +++ /dev/null @@ -1,128 +0,0 @@ -/* - * (C) Copyright 2003 - * Texas Instruments <www.ti.com> - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Alex Zuepke <azu@sysgo.de> - * - * (C) Copyright 2002-2004 - * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> - * - * (C) Copyright 2004 - * Philippe Robin, ARM Ltd. <philippe.robin@arm.com> - * - * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/timer_defs.h> -#include <div64.h> - -DECLARE_GLOBAL_DATA_PTR; - -static struct davinci_timer * const timer = - (struct davinci_timer *)CONFIG_SYS_TIMERBASE; - -#define TIMER_LOAD_VAL 0xffffffff - -#define TIM_CLK_DIV 16 - -int timer_init(void) -{ - /* We are using timer34 in unchained 32-bit mode, full speed */ - writel(0x0, &timer->tcr); - writel(0x0, &timer->tgcr); - writel(0x06 | ((TIM_CLK_DIV - 1) << 8), &timer->tgcr); - writel(0x0, &timer->tim34); - writel(TIMER_LOAD_VAL, &timer->prd34); - writel(2 << 22, &timer->tcr); - gd->arch.timer_rate_hz = CONFIG_SYS_HZ_CLOCK / TIM_CLK_DIV; - gd->arch.timer_reset_value = 0; - - return(0); -} - -/* - * Get the current 64 bit timer tick count - */ -unsigned long long get_ticks(void) -{ - unsigned long now = readl(&timer->tim34); - - /* increment tbu if tbl has rolled over */ - if (now < gd->arch.tbl) - gd->arch.tbu++; - gd->arch.tbl = now; - - return (((unsigned long long)gd->arch.tbu) << 32) | gd->arch.tbl; -} - -ulong get_timer(ulong base) -{ - unsigned long long timer_diff; - - timer_diff = get_ticks() - gd->arch.timer_reset_value; - - return lldiv(timer_diff, - (gd->arch.timer_rate_hz / CONFIG_SYS_HZ)) - base; -} - -void __udelay(unsigned long usec) -{ - unsigned long long endtime; - - endtime = lldiv((unsigned long long)usec * gd->arch.timer_rate_hz, - 1000000UL); - endtime += get_ticks(); - - while (get_ticks() < endtime) - ; -} - -/* - * This function is derived from PowerPC code (timebase clock frequency). - * On ARM it returns the number of timer ticks per second. - */ -ulong get_tbclk(void) -{ - return gd->arch.timer_rate_hz; -} - -#ifdef CONFIG_HW_WATCHDOG -static struct davinci_timer * const wdttimer = - (struct davinci_timer *)CONFIG_SYS_WDTTIMERBASE; - -/* - * See prufw2.pdf for using Timer as a WDT - */ -void davinci_hw_watchdog_enable(void) -{ - writel(0x0, &wdttimer->tcr); - writel(0x0, &wdttimer->tgcr); - /* TIMMODE = 2h */ - writel(0x08 | 0x03 | ((TIM_CLK_DIV - 1) << 8), &wdttimer->tgcr); - writel(CONFIG_SYS_WDT_PERIOD_LOW, &wdttimer->prd12); - writel(CONFIG_SYS_WDT_PERIOD_HIGH, &wdttimer->prd34); - writel(2 << 22, &wdttimer->tcr); - writel(0x0, &wdttimer->tim12); - writel(0x0, &wdttimer->tim34); - /* set WDEN bit, WDKEY 0xa5c6 */ - writel(0xa5c64000, &wdttimer->wdtcr); - /* clear counter register */ - writel(0xda7e4000, &wdttimer->wdtcr); -} - -void davinci_hw_watchdog_reset(void) -{ - writel(0xa5c64000, &wdttimer->wdtcr); - writel(0xda7e4000, &wdttimer->wdtcr); -} -#endif diff --git a/arch/arm/cpu/arm926ejs/kirkwood/Kconfig b/arch/arm/cpu/arm926ejs/kirkwood/Kconfig deleted file mode 100644 index 45c6687d0b..0000000000 --- a/arch/arm/cpu/arm926ejs/kirkwood/Kconfig +++ /dev/null @@ -1,88 +0,0 @@ -if KIRKWOOD - -choice - prompt "Marvell Kirkwood board select" - -config TARGET_OPENRD - bool "Marvell OpenRD Board" - -config TARGET_MV88F6281GTW_GE - bool "MV88f6281GTW_GE Board" - -config TARGET_RD6281A - bool "RD6281A Board" - -config TARGET_DREAMPLUG - bool "DreamPlug Board" - -config TARGET_GURUPLUG - bool "GuruPlug Board" - -config TARGET_SHEEVAPLUG - bool "SheevaPlug Board" - -config TARGET_LSXL - bool "lsxl Board" - -config TARGET_POGO_E02 - bool "pogo_e02 Board" - -config TARGET_DNS325 - bool "dns325 Board" - -config TARGET_ICONNECT - bool "iconnect Board" - -config TARGET_TK71 - bool "TK71 Board" - -config TARGET_KM_KIRKWOOD - bool "KM_KIRKWOOD Board" - -config TARGET_NET2BIG_V2 - bool "LaCie 2Big Network v2 NAS Board" - -config TARGET_NETSPACE_V2 - bool "LaCie netspace_v2 Board" - -config TARGET_WIRELESS_SPACE - bool "LaCie Wireless_space Board" - -config TARGET_IB62X0 - bool "ib62x0 Board" - -config TARGET_DOCKSTAR - bool "Dockstar Board" - -config TARGET_GOFLEXHOME - bool "GoFlex Home Board" - -config TARGET_NAS220 - bool "BlackArmor NAS220" - -endchoice - -config SYS_SOC - default "kirkwood" - -source "board/Marvell/openrd/Kconfig" -source "board/Marvell/mv88f6281gtw_ge/Kconfig" -source "board/Marvell/rd6281a/Kconfig" -source "board/Marvell/dreamplug/Kconfig" -source "board/Marvell/guruplug/Kconfig" -source "board/Marvell/sheevaplug/Kconfig" -source "board/buffalo/lsxl/Kconfig" -source "board/cloudengines/pogo_e02/Kconfig" -source "board/d-link/dns325/Kconfig" -source "board/iomega/iconnect/Kconfig" -source "board/karo/tk71/Kconfig" -source "board/keymile/km_arm/Kconfig" -source "board/LaCie/net2big_v2/Kconfig" -source "board/LaCie/netspace_v2/Kconfig" -source "board/LaCie/wireless_space/Kconfig" -source "board/raidsonic/ib62x0/Kconfig" -source "board/Seagate/dockstar/Kconfig" -source "board/Seagate/goflexhome/Kconfig" -source "board/Seagate/nas220/Kconfig" - -endif diff --git a/arch/arm/cpu/arm926ejs/kirkwood/Makefile b/arch/arm/cpu/arm926ejs/kirkwood/Makefile deleted file mode 100644 index df4756e4bd..0000000000 --- a/arch/arm/cpu/arm926ejs/kirkwood/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# -# (C) Copyright 2009 -# Marvell Semiconductor <www.marvell.com> -# Written-by: Prafulla Wadaskar <prafulla@marvell.com> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = cpu.o -obj-y += cache.o -obj-y += mpp.o diff --git a/arch/arm/cpu/arm926ejs/kirkwood/cache.c b/arch/arm/cpu/arm926ejs/kirkwood/cache.c deleted file mode 100644 index e18a3097dc..0000000000 --- a/arch/arm/cpu/arm926ejs/kirkwood/cache.c +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Copyright (c) 2012 Michael Walle - * Michael Walle <michael@walle.cc> - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#include <common.h> -#include <asm/arch/cpu.h> - -#define FEROCEON_EXTRA_FEATURE_L2C_EN (1<<22) - -void l2_cache_disable() -{ - u32 ctrl; - - ctrl = readfr_extra_feature_reg(); - ctrl &= ~FEROCEON_EXTRA_FEATURE_L2C_EN; - writefr_extra_feature_reg(ctrl); -} diff --git a/arch/arm/cpu/arm926ejs/kirkwood/cpu.c b/arch/arm/cpu/arm926ejs/kirkwood/cpu.c deleted file mode 100644 index 4c9d3fde47..0000000000 --- a/arch/arm/cpu/arm926ejs/kirkwood/cpu.c +++ /dev/null @@ -1,321 +0,0 @@ -/* - * (C) Copyright 2009 - * Marvell Semiconductor <www.marvell.com> - * Written-by: Prafulla Wadaskar <prafulla@marvell.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <netdev.h> -#include <asm/cache.h> -#include <asm/io.h> -#include <asm/arch/cpu.h> -#include <asm/arch/soc.h> -#include <mvebu_mmc.h> - -void reset_cpu(unsigned long ignored) -{ - struct kwcpu_registers *cpureg = - (struct kwcpu_registers *)KW_CPU_REG_BASE; - - writel(readl(&cpureg->rstoutn_mask) | (1 << 2), - &cpureg->rstoutn_mask); - writel(readl(&cpureg->sys_soft_rst) | 1, - &cpureg->sys_soft_rst); - while (1) ; -} - -/* - * Window Size - * Used with the Base register to set the address window size and location. - * Must be programmed from LSB to MSB as sequence of ones followed by - * sequence of zeros. The number of ones specifies the size of the window in - * 64 KByte granularity (e.g., a value of 0x00FF specifies 256 = 16 MByte). - * NOTE: A value of 0x0 specifies 64-KByte size. - */ -unsigned int kw_winctrl_calcsize(unsigned int sizeval) -{ - int i; - unsigned int j = 0; - u32 val = sizeval >> 1; - - for (i = 0; val >= 0x10000; i++) { - j |= (1 << i); - val = val >> 1; - } - return (0x0000ffff & j); -} - -/* - * kw_config_adr_windows - Configure address Windows - * - * There are 8 address windows supported by Kirkwood Soc to addess different - * devices. Each window can be configured for size, BAR and remap addr - * Below configuration is standard for most of the cases - * - * If remap function not used, remap_lo must be set as base - * - * Reference Documentation: - * Mbus-L to Mbus Bridge Registers Configuration. - * (Sec 25.1 and 25.3 of Datasheet) - */ -int kw_config_adr_windows(void) -{ - struct kwwin_registers *winregs = - (struct kwwin_registers *)KW_CPU_WIN_BASE; - - /* Window 0: PCIE MEM address space */ - writel(KWCPU_WIN_CTRL_DATA(1024 * 1024 * 256, KWCPU_TARGET_PCIE, - KWCPU_ATTR_PCIE_MEM, KWCPU_WIN_ENABLE), &winregs[0].ctrl); - - writel(KW_DEFADR_PCI_MEM, &winregs[0].base); - writel(KW_DEFADR_PCI_MEM, &winregs[0].remap_lo); - writel(0x0, &winregs[0].remap_hi); - - /* Window 1: PCIE IO address space */ - writel(KWCPU_WIN_CTRL_DATA(1024 * 64, KWCPU_TARGET_PCIE, - KWCPU_ATTR_PCIE_IO, KWCPU_WIN_ENABLE), &winregs[1].ctrl); - writel(KW_DEFADR_PCI_IO, &winregs[1].base); - writel(KW_DEFADR_PCI_IO_REMAP, &winregs[1].remap_lo); - writel(0x0, &winregs[1].remap_hi); - - /* Window 2: NAND Flash address space */ - writel(KWCPU_WIN_CTRL_DATA(1024 * 1024 * 128, KWCPU_TARGET_MEMORY, - KWCPU_ATTR_NANDFLASH, KWCPU_WIN_ENABLE), &winregs[2].ctrl); - writel(KW_DEFADR_NANDF, &winregs[2].base); - writel(KW_DEFADR_NANDF, &winregs[2].remap_lo); - writel(0x0, &winregs[2].remap_hi); - - /* Window 3: SPI Flash address space */ - writel(KWCPU_WIN_CTRL_DATA(1024 * 1024 * 128, KWCPU_TARGET_MEMORY, - KWCPU_ATTR_SPIFLASH, KWCPU_WIN_ENABLE), &winregs[3].ctrl); - writel(KW_DEFADR_SPIF, &winregs[3].base); - writel(KW_DEFADR_SPIF, &winregs[3].remap_lo); - writel(0x0, &winregs[3].remap_hi); - - /* Window 4: BOOT Memory address space */ - writel(KWCPU_WIN_CTRL_DATA(1024 * 1024 * 128, KWCPU_TARGET_MEMORY, - KWCPU_ATTR_BOOTROM, KWCPU_WIN_ENABLE), &winregs[4].ctrl); - writel(KW_DEFADR_BOOTROM, &winregs[4].base); - - /* Window 5: Security SRAM address space */ - writel(KWCPU_WIN_CTRL_DATA(1024 * 64, KWCPU_TARGET_SASRAM, - KWCPU_ATTR_SASRAM, KWCPU_WIN_ENABLE), &winregs[5].ctrl); - writel(KW_DEFADR_SASRAM, &winregs[5].base); - - /* Window 6-7: Disabled */ - writel(KWCPU_WIN_DISABLE, &winregs[6].ctrl); - writel(KWCPU_WIN_DISABLE, &winregs[7].ctrl); - - return 0; -} - -/* - * SYSRSTn Duration Counter Support - * - * Kirkwood SoC implements a hardware-based SYSRSTn duration counter. - * When SYSRSTn is asserted low, a SYSRSTn duration counter is running. - * The SYSRSTn duration counter is useful for implementing a manufacturer - * or factory reset. Upon a long reset assertion that is greater than a - * pre-configured environment variable value for sysrstdelay, - * The counter value is stored in the SYSRSTn Length Counter Register - * The counter is based on the 25-MHz reference clock (40ns) - * It is a 29-bit counter, yielding a maximum counting duration of - * 2^29/25 MHz (21.4 seconds). When the counter reach its maximum value, - * it remains at this value until counter reset is triggered by setting - * bit 31 of KW_REG_SYSRST_CNT - */ -static void kw_sysrst_action(void) -{ - int ret; - char *s = getenv("sysrstcmd"); - - if (!s) { - debug("Error.. %s failed, check sysrstcmd\n", - __FUNCTION__); - return; - } - - debug("Starting %s process...\n", __FUNCTION__); - ret = run_command(s, 0); - if (ret != 0) - debug("Error.. %s failed\n", __FUNCTION__); - else - debug("%s process finished\n", __FUNCTION__); -} - -static void kw_sysrst_check(void) -{ - u32 sysrst_cnt, sysrst_dly; - char *s; - - /* - * no action if sysrstdelay environment variable is not defined - */ - s = getenv("sysrstdelay"); - if (s == NULL) - return; - - /* read sysrstdelay value */ - sysrst_dly = (u32) simple_strtoul(s, NULL, 10); - - /* read SysRst Length counter register (bits 28:0) */ - sysrst_cnt = (0x1fffffff & readl(KW_REG_SYSRST_CNT)); - debug("H/w Rst hold time: %d.%d secs\n", - sysrst_cnt / SYSRST_CNT_1SEC_VAL, - sysrst_cnt % SYSRST_CNT_1SEC_VAL); - - /* clear the counter for next valid read*/ - writel(1 << 31, KW_REG_SYSRST_CNT); - - /* - * sysrst_action: - * if H/w Reset key is pressed and hold for time - * more than sysrst_dly in seconds - */ - if (sysrst_cnt >= SYSRST_CNT_1SEC_VAL * sysrst_dly) - kw_sysrst_action(); -} - -#if defined(CONFIG_DISPLAY_CPUINFO) -int print_cpuinfo(void) -{ - char *rev = "??"; - u16 devid = (readl(KW_REG_PCIE_DEVID) >> 16) & 0xffff; - u8 revid = readl(KW_REG_PCIE_REVID) & 0xff; - - if ((readl(KW_REG_DEVICE_ID) & 0x03) > 2) { - printf("Error.. %s:Unsupported Kirkwood SoC 88F%04x\n", __FUNCTION__, devid); - return -1; - } - - switch (revid) { - case 0: - if (devid == 0x6281) - rev = "Z0"; - else if (devid == 0x6282) - rev = "A0"; - break; - case 1: - rev = "A1"; - break; - case 2: - rev = "A0"; - break; - case 3: - rev = "A1"; - break; - default: - break; - } - - printf("SoC: Kirkwood 88F%04x_%s\n", devid, rev); - return 0; -} -#endif /* CONFIG_DISPLAY_CPUINFO */ - -#ifdef CONFIG_ARCH_CPU_INIT -int arch_cpu_init(void) -{ - u32 reg; - struct kwcpu_registers *cpureg = - (struct kwcpu_registers *)KW_CPU_REG_BASE; - - /* Linux expects` the internal registers to be at 0xf1000000 */ - writel(KW_REGS_PHY_BASE, KW_OFFSET_REG); - - /* Enable and invalidate L2 cache in write through mode */ - writel(readl(&cpureg->l2_cfg) | 0x18, &cpureg->l2_cfg); - invalidate_l2_cache(); - - kw_config_adr_windows(); - -#ifdef CONFIG_KIRKWOOD_RGMII_PAD_1V8 - /* - * Configures the I/O voltage of the pads connected to Egigabit - * Ethernet interface to 1.8V - * By default it is set to 3.3V - */ - reg = readl(KW_REG_MPP_OUT_DRV_REG); - reg |= (1 << 7); - writel(reg, KW_REG_MPP_OUT_DRV_REG); -#endif -#ifdef CONFIG_KIRKWOOD_EGIGA_INIT - /* - * Set egiga port0/1 in normal functional mode - * This is required becasue on kirkwood by default ports are in reset mode - * OS egiga driver may not have provision to set them in normal mode - * and if u-boot is build without network support, network may fail at OS level - */ - reg = readl(KWGBE_PORT_SERIAL_CONTROL1_REG(0)); - reg &= ~(1 << 4); /* Clear PortReset Bit */ - writel(reg, (KWGBE_PORT_SERIAL_CONTROL1_REG(0))); - reg = readl(KWGBE_PORT_SERIAL_CONTROL1_REG(1)); - reg &= ~(1 << 4); /* Clear PortReset Bit */ - writel(reg, (KWGBE_PORT_SERIAL_CONTROL1_REG(1))); -#endif -#ifdef CONFIG_KIRKWOOD_PCIE_INIT - /* - * Enable PCI Express Port0 - */ - reg = readl(&cpureg->ctrl_stat); - reg |= (1 << 0); /* Set PEX0En Bit */ - writel(reg, &cpureg->ctrl_stat); -#endif - return 0; -} -#endif /* CONFIG_ARCH_CPU_INIT */ - -/* - * SOC specific misc init - */ -#if defined(CONFIG_ARCH_MISC_INIT) -int arch_misc_init(void) -{ - volatile u32 temp; - - /*CPU streaming & write allocate */ - temp = readfr_extra_feature_reg(); - temp &= ~(1 << 28); /* disable wr alloc */ - writefr_extra_feature_reg(temp); - - temp = readfr_extra_feature_reg(); - temp &= ~(1 << 29); /* streaming disabled */ - writefr_extra_feature_reg(temp); - - /* L2Cache settings */ - temp = readfr_extra_feature_reg(); - /* Disable L2C pre fetch - Set bit 24 */ - temp |= (1 << 24); - /* enable L2C - Set bit 22 */ - temp |= (1 << 22); - writefr_extra_feature_reg(temp); - - icache_enable(); - /* Change reset vector to address 0x0 */ - temp = get_cr(); - set_cr(temp & ~CR_V); - - /* checks and execute resset to factory event */ - kw_sysrst_check(); - - return 0; -} -#endif /* CONFIG_ARCH_MISC_INIT */ - -#ifdef CONFIG_MVGBE -int cpu_eth_init(bd_t *bis) -{ - mvgbe_initialize(bis); - return 0; -} -#endif - -#ifdef CONFIG_MVEBU_MMC -int board_mmc_init(bd_t *bis) -{ - mvebu_mmc_init(bis); - return 0; -} -#endif /* CONFIG_MVEBU_MMC */ diff --git a/arch/arm/cpu/arm926ejs/kirkwood/mpp.c b/arch/arm/cpu/arm926ejs/kirkwood/mpp.c deleted file mode 100644 index 7222504ed3..0000000000 --- a/arch/arm/cpu/arm926ejs/kirkwood/mpp.c +++ /dev/null @@ -1,90 +0,0 @@ -/* - * arch/arm/mach-kirkwood/mpp.c - * - * MPP functions for Marvell Kirkwood SoCs - * Referenced from Linux kernel source - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/cpu.h> -#include <asm/arch/soc.h> -#include <asm/arch/mpp.h> - -static u32 kirkwood_variant(void) -{ - switch (readl(KW_REG_DEVICE_ID) & 0x03) { - case 1: - return MPP_F6192_MASK; - case 2: - return MPP_F6281_MASK; - default: - debug("MPP setup: unknown kirkwood variant\n"); - return 0; - } -} - -#define MPP_CTRL(i) (KW_MPP_BASE + (i* 4)) -#define MPP_NR_REGS (1 + MPP_MAX/8) - -void kirkwood_mpp_conf(const u32 *mpp_list, u32 *mpp_save) -{ - u32 mpp_ctrl[MPP_NR_REGS]; - unsigned int variant_mask; - int i; - - variant_mask = kirkwood_variant(); - if (!variant_mask) - return; - - debug( "initial MPP regs:"); - for (i = 0; i < MPP_NR_REGS; i++) { - mpp_ctrl[i] = readl(MPP_CTRL(i)); - debug(" %08x", mpp_ctrl[i]); - } - debug("\n"); - - - while (*mpp_list) { - unsigned int num = MPP_NUM(*mpp_list); - unsigned int sel = MPP_SEL(*mpp_list); - unsigned int sel_save; - int shift; - - if (num > MPP_MAX) { - debug("kirkwood_mpp_conf: invalid MPP " - "number (%u)\n", num); - continue; - } - if (!(*mpp_list & variant_mask)) { - debug("kirkwood_mpp_conf: requested MPP%u config " - "unavailable on this hardware\n", num); - continue; - } - - shift = (num & 7) << 2; - - if (mpp_save) { - sel_save = (mpp_ctrl[num / 8] >> shift) & 0xf; - *mpp_save = num | (sel_save << 8) | variant_mask; - mpp_save++; - } - - mpp_ctrl[num / 8] &= ~(0xf << shift); - mpp_ctrl[num / 8] |= sel << shift; - - mpp_list++; - } - - debug(" final MPP regs:"); - for (i = 0; i < MPP_NR_REGS; i++) { - writel(mpp_ctrl[i], MPP_CTRL(i)); - debug(" %08x", mpp_ctrl[i]); - } - debug("\n"); - -} diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_boot.c b/arch/arm/cpu/arm926ejs/mxs/spl_boot.c index d29b9aaf3d..d7956e57de 100644 --- a/arch/arm/cpu/arm926ejs/mxs/spl_boot.c +++ b/arch/arm/cpu/arm926ejs/mxs/spl_boot.c @@ -147,6 +147,7 @@ void mxs_common_spl_init(const uint32_t arg, const uint32_t *resptr, mxs_iomux_setup_multiple_pads(iomux_setup, iomux_size); mxs_spl_console_init(); + debug("SPL: Serial Console Initialised\n"); mxs_power_init(); @@ -156,6 +157,11 @@ void mxs_common_spl_init(const uint32_t arg, const uint32_t *resptr, data->boot_mode_idx = bootmode; mxs_power_wait_pswitch(); + + if (mxs_boot_modes[data->boot_mode_idx].boot_pads == MXS_BM_JTAG) { + debug("SPL: Waiting for JTAG user\n"); + asm volatile ("x: b x"); + } } /* Support aparatus */ diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_lradc_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_lradc_init.c index cdfcddd824..96bd32f8ad 100644 --- a/arch/arm/cpu/arm926ejs/mxs/spl_lradc_init.c +++ b/arch/arm/cpu/arm926ejs/mxs/spl_lradc_init.c @@ -18,6 +18,8 @@ void mxs_lradc_init(void) { struct mxs_lradc_regs *regs = (struct mxs_lradc_regs *)MXS_LRADC_BASE; + debug("SPL: Initialisating LRADC\n"); + writel(LRADC_CTRL0_SFTRST, ®s->hw_lradc_ctrl0_clr); writel(LRADC_CTRL0_CLKGATE, ®s->hw_lradc_ctrl0_clr); writel(LRADC_CTRL0_ONCHIP_GROUNDREF, ®s->hw_lradc_ctrl0_clr); @@ -37,9 +39,15 @@ void mxs_lradc_enable_batt_measurement(void) { struct mxs_lradc_regs *regs = (struct mxs_lradc_regs *)MXS_LRADC_BASE; + debug("SPL: Enabling LRADC battery measurement\n"); + /* Check if the channel is present at all. */ - if (!(readl(®s->hw_lradc_status) & LRADC_STATUS_CHANNEL7_PRESENT)) + if (!(readl(®s->hw_lradc_status) & LRADC_STATUS_CHANNEL7_PRESENT)) { + debug("SPL: LRADC channel 7 is not present - aborting\n"); return; + } + + debug("SPL: LRADC channel 7 is present - configuring\n"); writel(LRADC_CTRL1_LRADC7_IRQ_EN, ®s->hw_lradc_ctrl1_clr); writel(LRADC_CTRL1_LRADC7_IRQ, ®s->hw_lradc_ctrl1_clr); @@ -65,6 +73,7 @@ void mxs_lradc_enable_batt_measurement(void) 100, ®s->hw_lradc_delay3); writel(0xffffffff, ®s->hw_lradc_ch7_clr); - writel(LRADC_DELAY_KICK, ®s->hw_lradc_delay3_set); + + debug("SPL: LRADC channel 7 configuration complete\n"); } diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c index 97ef67d8c5..a744e5d499 100644 --- a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c +++ b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c @@ -92,6 +92,7 @@ static uint32_t dram_vals[] = { __weak void mxs_adjust_memory_params(uint32_t *dram_vals) { + debug("SPL: Using default SDRAM parameters\n"); } #ifdef CONFIG_MX28 @@ -99,8 +100,10 @@ static void initialize_dram_values(void) { int i; + debug("SPL: Setting mx28 board specific SDRAM parameters\n"); mxs_adjust_memory_params(dram_vals); + debug("SPL: Applying SDRAM parameters\n"); for (i = 0; i < ARRAY_SIZE(dram_vals); i++) writel(dram_vals[i], MXS_DRAM_BASE + (4 * i)); } @@ -109,6 +112,7 @@ static void initialize_dram_values(void) { int i; + debug("SPL: Setting mx23 board specific SDRAM parameters\n"); mxs_adjust_memory_params(dram_vals); /* @@ -120,6 +124,7 @@ static void initialize_dram_values(void) * HW_DRAM_CTL8 is setup as the last element. * So skip the initialization of these HW_DRAM_CTL registers. */ + debug("SPL: Applying SDRAM parameters\n"); for (i = 0; i < ARRAY_SIZE(dram_vals); i++) { if (i == 8 || i == 27 || i == 28 || i == 35) continue; @@ -146,6 +151,8 @@ static void mxs_mem_init_clock(void) const unsigned char divider = 21; #endif + debug("SPL: Initialising FRAC0\n"); + /* Gate EMI clock */ writeb(CLKCTRL_FRAC_CLKGATE, &clkctrl_regs->hw_clkctrl_frac0_set[CLKCTRL_FRAC0_EMI]); @@ -170,6 +177,7 @@ static void mxs_mem_init_clock(void) &clkctrl_regs->hw_clkctrl_clkseq_clr); early_delay(10000); + debug("SPL: FRAC0 Initialised\n"); } static void mxs_mem_setup_cpu_and_hbus(void) @@ -177,6 +185,8 @@ static void mxs_mem_setup_cpu_and_hbus(void) struct mxs_clkctrl_regs *clkctrl_regs = (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; + debug("SPL: Setting CPU and HBUS clock frequencies\n"); + /* Set fractional divider for ref_cpu to 480 * 18 / 19 = 454MHz * and ungate CPU clock */ writeb(19 & CLKCTRL_FRAC_FRAC_MASK, @@ -209,6 +219,8 @@ static void mxs_mem_setup_vdda(void) struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; + debug("SPL: Configuring VDDA\n"); + writel((0xc << POWER_VDDACTRL_TRG_OFFSET) | (0x7 << POWER_VDDACTRL_BO_OFFSET_OFFSET) | POWER_VDDACTRL_LINREG_OFFSET_1STEPS_BELOW, @@ -240,6 +252,8 @@ static void mx23_mem_setup_vddmem(void) struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; + debug("SPL: Setting mx23 VDDMEM\n"); + /* We must wait before and after disabling the current limiter! */ early_delay(10000); @@ -252,6 +266,8 @@ static void mx23_mem_setup_vddmem(void) static void mx23_mem_init(void) { + debug("SPL: Initialising mx23 SDRAM Controller\n"); + /* * Reset/ungate the EMI block. This is essential, otherwise the system * suffers from memory instability. This thing is mx23 specific and is @@ -297,6 +313,8 @@ static void mx28_mem_init(void) struct mxs_pinctrl_regs *pinctrl_regs = (struct mxs_pinctrl_regs *)MXS_PINCTRL_BASE; + debug("SPL: Initialising mx28 SDRAM Controller\n"); + /* Set DDR2 mode */ writel(PINCTRL_EMI_DS_CTRL_DDR_MODE_DDR2, &pinctrl_regs->hw_pinctrl_emi_ds_ctrl_set); diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c index 1c54ab7de3..c342217fa9 100644 --- a/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c +++ b/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c @@ -14,6 +14,13 @@ #include "mxs_init.h" +#ifdef CONFIG_SYS_MXS_VDD5V_ONLY +#define DCDC4P2_DROPOUT_CONFIG POWER_DCDC4P2_DROPOUT_CTRL_100MV | \ + POWER_DCDC4P2_DROPOUT_CTRL_SRC_4P2 +#else +#define DCDC4P2_DROPOUT_CONFIG POWER_DCDC4P2_DROPOUT_CTRL_100MV | \ + POWER_DCDC4P2_DROPOUT_CTRL_SRC_SEL +#endif /** * mxs_power_clock2xtal() - Switch CPU core clock source to 24MHz XTAL * @@ -26,6 +33,8 @@ static void mxs_power_clock2xtal(void) struct mxs_clkctrl_regs *clkctrl_regs = (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; + debug("SPL: Switching CPU clock to 24MHz XTAL\n"); + /* Set XTAL as CPU reference clock */ writel(CLKCTRL_CLKSEQ_BYPASS_CPU, &clkctrl_regs->hw_clkctrl_clkseq_set); @@ -43,9 +52,23 @@ static void mxs_power_clock2pll(void) struct mxs_clkctrl_regs *clkctrl_regs = (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; + debug("SPL: Switching CPU core clock source to PLL\n"); + + /* + * TODO: Are we really? It looks like we turn on PLL0, but we then + * set the CLKCTRL_CLKSEQ_BYPASS_CPU bit of the (which was already + * set by mxs_power_clock2xtal()). Clearing this bit here seems to + * introduce some instability (causing the CPU core to hang). Maybe + * we aren't giving PLL0 enough time to stabilise? + */ setbits_le32(&clkctrl_regs->hw_clkctrl_pll0ctrl0, CLKCTRL_PLL0CTRL0_POWER); early_delay(100); + + /* + * TODO: Should the PLL0 FORCE_LOCK bit be set here followed be a + * wait on the PLL0 LOCK bit? + */ setbits_le32(&clkctrl_regs->hw_clkctrl_clkseq, CLKCTRL_CLKSEQ_BYPASS_CPU); } @@ -62,6 +85,8 @@ static void mxs_power_set_auto_restart(void) struct mxs_rtc_regs *rtc_regs = (struct mxs_rtc_regs *)MXS_RTC_BASE; + debug("SPL: Setting auto-restart bit\n"); + writel(RTC_CTRL_SFTRST, &rtc_regs->hw_rtc_ctrl_clr); while (readl(&rtc_regs->hw_rtc_ctrl) & RTC_CTRL_SFTRST) ; @@ -101,14 +126,17 @@ static void mxs_power_set_linreg(void) (struct mxs_power_regs *)MXS_POWER_BASE; /* Set linear regulator 25mV below switching converter */ + debug("SPL: Setting VDDD 25mV below DC-DC converters\n"); clrsetbits_le32(&power_regs->hw_power_vdddctrl, POWER_VDDDCTRL_LINREG_OFFSET_MASK, POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW); + debug("SPL: Setting VDDA 25mV below DC-DC converters\n"); clrsetbits_le32(&power_regs->hw_power_vddactrl, POWER_VDDACTRL_LINREG_OFFSET_MASK, POWER_VDDACTRL_LINREG_OFFSET_1STEPS_BELOW); + debug("SPL: Setting VDDIO 25mV below DC-DC converters\n"); clrsetbits_le32(&power_regs->hw_power_vddioctrl, POWER_VDDIOCTRL_LINREG_OFFSET_MASK, POWER_VDDIOCTRL_LINREG_OFFSET_1STEPS_BELOW); @@ -127,6 +155,8 @@ static int mxs_get_batt_volt(void) volt &= POWER_BATTMONITOR_BATT_VAL_MASK; volt >>= POWER_BATTMONITOR_BATT_VAL_OFFSET; volt *= 8; + + debug("SPL: Battery Voltage = %dmV\n", volt); return volt; } @@ -154,8 +184,10 @@ static int mxs_is_batt_good(void) (struct mxs_power_regs *)MXS_POWER_BASE; uint32_t volt = mxs_get_batt_volt(); - if ((volt >= 2400) && (volt <= 4300)) + if ((volt >= 2400) && (volt <= 4300)) { + debug("SPL: Battery is good\n"); return 1; + } clrsetbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK, @@ -175,16 +207,21 @@ static int mxs_is_batt_good(void) volt = mxs_get_batt_volt(); - if (volt >= 3500) + if (volt >= 3500) { + debug("SPL: Battery Voltage too high\n"); return 0; + } - if (volt >= 2400) + if (volt >= 2400) { + debug("SPL: Battery is good\n"); return 1; + } writel(POWER_CHARGE_STOP_ILIMIT_MASK | POWER_CHARGE_BATTCHRG_I_MASK, &power_regs->hw_power_charge_clr); writel(POWER_CHARGE_PWD_BATTCHRG, &power_regs->hw_power_charge_set); + debug("SPL: Battery Voltage too low\n"); return 0; } @@ -203,6 +240,7 @@ static void mxs_power_setup_5v_detect(void) (struct mxs_power_regs *)MXS_POWER_BASE; /* Start 5V detection */ + debug("SPL: Starting 5V input detection comparator\n"); clrsetbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_VBUSVALID_TRSH_MASK, POWER_5VCTRL_VBUSVALID_TRSH_4V4 | @@ -220,6 +258,8 @@ static void mxs_src_power_init(void) struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; + debug("SPL: Pre-Configuring power block\n"); + /* Improve efficieny and reduce transient ripple */ writel(POWER_LOOPCTRL_TOGGLE_DIF | POWER_LOOPCTRL_EN_CM_HYST | POWER_LOOPCTRL_EN_DF_HYST, &power_regs->hw_power_loopctrl_set); @@ -257,6 +297,8 @@ static void mxs_power_init_4p2_params(void) struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; + debug("SPL: Configuring common 4P2 regulator params\n"); + /* Setup 4P2 parameters */ clrsetbits_le32(&power_regs->hw_power_dcdc4p2, POWER_DCDC4P2_CMPTRIP_MASK | POWER_DCDC4P2_TRG_MASK, @@ -268,8 +310,7 @@ static void mxs_power_init_4p2_params(void) clrsetbits_le32(&power_regs->hw_power_dcdc4p2, POWER_DCDC4P2_DROPOUT_CTRL_MASK, - POWER_DCDC4P2_DROPOUT_CTRL_100MV | - POWER_DCDC4P2_DROPOUT_CTRL_SRC_SEL); + DCDC4P2_DROPOUT_CONFIG); clrsetbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK, @@ -289,6 +330,8 @@ static void mxs_enable_4p2_dcdc_input(int xfer) uint32_t tmp, vbus_thresh, vbus_5vdetect, pwd_bo; uint32_t prev_5v_brnout, prev_5v_droop; + debug("SPL: %s 4P2 DC-DC Input\n", xfer ? "Enabling" : "Disabling"); + prev_5v_brnout = readl(&power_regs->hw_power_5vctrl) & POWER_5VCTRL_PWDN_5VBRNOUT; prev_5v_droop = readl(&power_regs->hw_power_ctrl) & @@ -390,6 +433,8 @@ static void mxs_power_init_4p2_regulator(void) (struct mxs_power_regs *)MXS_POWER_BASE; uint32_t tmp, tmp2; + debug("SPL: Enabling 4P2 regulator\n"); + setbits_le32(&power_regs->hw_power_dcdc4p2, POWER_DCDC4P2_ENABLE_4P2); writel(POWER_CHARGE_ENABLE_LOAD, &power_regs->hw_power_charge_set); @@ -407,6 +452,7 @@ static void mxs_power_init_4p2_regulator(void) * gradually to avoid large inrush current from the 5V cable which can * cause transients/problems */ + debug("SPL: Charging 4P2 capacitor\n"); mxs_enable_4p2_dcdc_input(0); if (readl(&power_regs->hw_power_ctrl) & POWER_CTRL_VBUS_VALID_IRQ) { @@ -420,6 +466,8 @@ static void mxs_power_init_4p2_regulator(void) POWER_DCDC4P2_ENABLE_DCDC); writel(POWER_5VCTRL_PWD_CHARGE_4P2_MASK, &power_regs->hw_power_5vctrl_set); + + debug("SPL: Unable to recover from mx23 errata 5837\n"); hang(); } @@ -433,6 +481,7 @@ static void mxs_power_init_4p2_regulator(void) * current limit until the brownout status is false or until we've * reached our maximum defined 4p2 current limit. */ + debug("SPL: Setting 4P2 brownout level\n"); clrsetbits_le32(&power_regs->hw_power_dcdc4p2, POWER_DCDC4P2_BO_MASK, 22 << POWER_DCDC4P2_BO_OFFSET); /* 4.15V */ @@ -479,8 +528,11 @@ static void mxs_power_init_dcdc_4p2_source(void) struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; + debug("SPL: Switching DC-DC converters to 4P2\n"); + if (!(readl(&power_regs->hw_power_dcdc4p2) & POWER_DCDC4P2_ENABLE_DCDC)) { + debug("SPL: Already switched - aborting\n"); hang(); } @@ -509,6 +561,8 @@ static void mxs_power_enable_4p2(void) uint32_t vdddctrl, vddactrl, vddioctrl; uint32_t tmp; + debug("SPL: Powering up 4P2 regulator\n"); + vdddctrl = readl(&power_regs->hw_power_vdddctrl); vddactrl = readl(&power_regs->hw_power_vddactrl); vddioctrl = readl(&power_regs->hw_power_vddioctrl); @@ -559,6 +613,8 @@ static void mxs_power_enable_4p2(void) if (tmp) writel(POWER_CHARGE_ENABLE_LOAD, &power_regs->hw_power_charge_clr); + + debug("SPL: 4P2 regulator powered-up\n"); } /** @@ -574,6 +630,8 @@ static void mxs_boot_valid_5v(void) struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; + debug("SPL: Booting from 5V supply\n"); + /* * Use VBUSVALID level instead of VDD5V_GT_VDDIO level to trigger a 5V * disconnect event. FIXME @@ -601,6 +659,9 @@ static void mxs_powerdown(void) { struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; + + debug("Powering Down\n"); + writel(POWER_RESET_UNLOCK_KEY, &power_regs->hw_power_reset); writel(POWER_RESET_UNLOCK_KEY | POWER_RESET_PWD_OFF, &power_regs->hw_power_reset); @@ -617,6 +678,8 @@ static void mxs_batt_boot(void) struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; + debug("SPL: Configuring power block to boot from battery\n"); + clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_PWDN_5VBRNOUT); clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_ENABLE_DCDC); @@ -672,6 +735,8 @@ static void mxs_handle_5v_conflict(void) (struct mxs_power_regs *)MXS_POWER_BASE; uint32_t tmp; + debug("SPL: Resolving 5V conflict\n"); + setbits_le32(&power_regs->hw_power_vddioctrl, POWER_VDDIOCTRL_BO_OFFSET_MASK); @@ -683,19 +748,27 @@ static void mxs_handle_5v_conflict(void) * VDDIO has a brownout, then the VDD5V_GT_VDDIO becomes * unreliable */ + debug("SPL: VDDIO has a brownout\n"); mxs_powerdown(); break; } if (tmp & POWER_STS_VDD5V_GT_VDDIO) { + debug("SPL: POWER_STS_VDD5V_GT_VDDIO is set\n"); mxs_boot_valid_5v(); break; } else { + debug("SPL: POWER_STS_VDD5V_GT_VDDIO is not set\n"); mxs_powerdown(); break; } + /* + * TODO: I can't see this being reached. We'll either + * powerdown or boot from a stable 5V supply. + */ if (tmp & POWER_STS_PSWITCH_MASK) { + debug("SPL: POWER_STS_PSWITCH_MASK is set\n"); mxs_batt_boot(); break; } @@ -713,21 +786,26 @@ static void mxs_5v_boot(void) struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; + debug("SPL: Configuring power block to boot from 5V input\n"); + /* * NOTE: In original IMX-Bootlets, this also checks for VBUSVALID, * but their implementation always returns 1 so we omit it here. */ if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) { + debug("SPL: 5V VDD good\n"); mxs_boot_valid_5v(); return; } early_delay(1000); if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) { + debug("SPL: 5V VDD good (after delay)\n"); mxs_boot_valid_5v(); return; } + debug("SPL: 5V VDD not good\n"); mxs_handle_5v_conflict(); } @@ -742,6 +820,8 @@ static void mxs_init_batt_bo(void) struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; + debug("SPL: Initialising battery brown-out level to 3.0V\n"); + /* Brownout at 3V */ clrsetbits_le32(&power_regs->hw_power_battmonitor, POWER_BATTMONITOR_BRWNOUT_LVL_MASK, @@ -762,6 +842,8 @@ static void mxs_switch_vddd_to_dcdc_source(void) struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; + debug("SPL: Switching VDDD to DC-DC converters\n"); + clrsetbits_le32(&power_regs->hw_power_vdddctrl, POWER_VDDDCTRL_LINREG_OFFSET_MASK, POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW); @@ -788,6 +870,8 @@ static void mxs_power_configure_power_source(void) struct mxs_lradc_regs *lradc_regs = (struct mxs_lradc_regs *)MXS_LRADC_BASE; + debug("SPL: Configuring power source\n"); + mxs_src_power_init(); if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) { @@ -811,6 +895,10 @@ static void mxs_power_configure_power_source(void) mxs_batt_boot(); } + /* + * TODO: Do not switch CPU clock to PLL if we are VDD5V is sourced + * from USB VBUS + */ mxs_power_clock2pll(); mxs_init_batt_bo(); @@ -819,6 +907,7 @@ static void mxs_power_configure_power_source(void) #ifdef CONFIG_MX23 /* Fire up the VDDMEM LinReg now that we're all set. */ + debug("SPL: Enabling mx23 VDDMEM linear regulator\n"); writel(POWER_VDDMEMCTRL_ENABLE_LINREG | POWER_VDDMEMCTRL_ENABLE_ILIMIT, &power_regs->hw_power_vddmemctrl); #endif @@ -838,6 +927,8 @@ static void mxs_enable_output_rail_protection(void) struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; + debug("SPL: Enabling output rail protection\n"); + writel(POWER_CTRL_VDDD_BO_IRQ | POWER_CTRL_VDDA_BO_IRQ | POWER_CTRL_VDDIO_BO_IRQ, &power_regs->hw_power_ctrl_clr); @@ -1077,6 +1168,8 @@ static void mxs_power_set_vddx(const struct mxs_vddx_cfg *cfg, */ static void mxs_setup_batt_detect(void) { + debug("SPL: Starting battery voltage measurement logic\n"); + mxs_lradc_init(); mxs_lradc_enable_batt_measurement(); early_delay(10); @@ -1111,6 +1204,8 @@ void mxs_power_init(void) struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; + debug("SPL: Initialising Power Block\n"); + mxs_ungate_power(); mxs_power_clock2xtal(); @@ -1123,9 +1218,13 @@ void mxs_power_init(void) mxs_power_configure_power_source(); mxs_enable_output_rail_protection(); + debug("SPL: Setting VDDIO to 3V3 (brownout @ 3v15)\n"); mxs_power_set_vddx(&mxs_vddio_cfg, 3300, 3150); + + debug("SPL: Setting VDDD to 1V5 (brownout @ 1v0)\n"); mxs_power_set_vddx(&mxs_vddd_cfg, 1500, 1000); #ifdef CONFIG_MX23 + debug("SPL: Setting mx23 VDDMEM to 2V5 (brownout @ 1v7)\n"); mxs_power_set_vddx(&mxs_vddmem_cfg, 2500, 1700); #endif writel(POWER_CTRL_VDDD_BO_IRQ | POWER_CTRL_VDDA_BO_IRQ | @@ -1150,6 +1249,7 @@ void mxs_power_wait_pswitch(void) struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; + debug("SPL: Waiting for power switch input\n"); while (!(readl(&power_regs->hw_power_sts) & POWER_STS_PSWITCH_MASK)) ; } diff --git a/arch/arm/cpu/arm926ejs/nomadik/Kconfig b/arch/arm/cpu/arm926ejs/nomadik/Kconfig deleted file mode 100644 index 265f336469..0000000000 --- a/arch/arm/cpu/arm926ejs/nomadik/Kconfig +++ /dev/null @@ -1,16 +0,0 @@ -if ARCH_NOMADIK - -choice - prompt "Nomadik board select" - -config NOMADIK_NHK8815 - bool "ST 8815 Nomadik Hardware Kit" - -endchoice - -config SYS_SOC - default "nomadik" - -source "board/st/nhk8815/Kconfig" - -endif diff --git a/arch/arm/cpu/arm926ejs/nomadik/Makefile b/arch/arm/cpu/arm926ejs/nomadik/Makefile deleted file mode 100644 index cdf1345d58..0000000000 --- a/arch/arm/cpu/arm926ejs/nomadik/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = timer.o gpio.o -obj-y += reset.o diff --git a/arch/arm/cpu/arm926ejs/nomadik/gpio.c b/arch/arm/cpu/arm926ejs/nomadik/gpio.c deleted file mode 100644 index eff5b2b75e..0000000000 --- a/arch/arm/cpu/arm926ejs/nomadik/gpio.c +++ /dev/null @@ -1,83 +0,0 @@ -/* - * (C) Copyright 2009 Alessandro Rubini - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/gpio.h> - -static unsigned long gpio_base[4] = { - NOMADIK_GPIO0_BASE, - NOMADIK_GPIO1_BASE, - NOMADIK_GPIO2_BASE, - NOMADIK_GPIO3_BASE -}; - -enum gpio_registers { - GPIO_DAT = 0x00, /* data register */ - GPIO_DATS = 0x04, /* data set */ - GPIO_DATC = 0x08, /* data clear */ - GPIO_PDIS = 0x0c, /* pull disable */ - GPIO_DIR = 0x10, /* direction */ - GPIO_DIRS = 0x14, /* direction set */ - GPIO_DIRC = 0x18, /* direction clear */ - GPIO_AFSLA = 0x20, /* alternate function select A */ - GPIO_AFSLB = 0x24, /* alternate function select B */ -}; - -static inline unsigned long gpio_to_base(int gpio) -{ - return gpio_base[gpio / 32]; -} - -static inline u32 gpio_to_bit(int gpio) -{ - return 1 << (gpio & 0x1f); -} - -void nmk_gpio_af(int gpio, int alternate_function) -{ - unsigned long base = gpio_to_base(gpio); - u32 bit = gpio_to_bit(gpio); - u32 afunc, bfunc; - - /* alternate function is 0..3, with one bit per register */ - afunc = readl(base + GPIO_AFSLA) & ~bit; - bfunc = readl(base + GPIO_AFSLB) & ~bit; - if (alternate_function & 1) afunc |= bit; - if (alternate_function & 2) bfunc |= bit; - writel(afunc, base + GPIO_AFSLA); - writel(bfunc, base + GPIO_AFSLB); -} - -void nmk_gpio_dir(int gpio, int dir) -{ - unsigned long base = gpio_to_base(gpio); - u32 bit = gpio_to_bit(gpio); - - if (dir) - writel(bit, base + GPIO_DIRS); - else - writel(bit, base + GPIO_DIRC); -} - -void nmk_gpio_set(int gpio, int val) -{ - unsigned long base = gpio_to_base(gpio); - u32 bit = gpio_to_bit(gpio); - - if (val) - writel(bit, base + GPIO_DATS); - else - writel(bit, base + GPIO_DATC); -} - -int nmk_gpio_get(int gpio) -{ - unsigned long base = gpio_to_base(gpio); - u32 bit = gpio_to_bit(gpio); - - return readl(base + GPIO_DAT) & bit; -} diff --git a/arch/arm/cpu/arm926ejs/nomadik/reset.S b/arch/arm/cpu/arm926ejs/nomadik/reset.S deleted file mode 100644 index ec954726ae..0000000000 --- a/arch/arm/cpu/arm926ejs/nomadik/reset.S +++ /dev/null @@ -1,14 +0,0 @@ -#include <config.h> -/* - * Processor reset for Nomadik - */ - - .align 5 -.globl reset_cpu -reset_cpu: - ldr r0, =NOMADIK_SRC_BASE /* System and Reset Controller */ - ldr r1, =0x1 - str r1, [r0, #0x18] - -_loop_forever: - b _loop_forever diff --git a/arch/arm/cpu/arm926ejs/nomadik/timer.c b/arch/arm/cpu/arm926ejs/nomadik/timer.c deleted file mode 100644 index 775d0b7488..0000000000 --- a/arch/arm/cpu/arm926ejs/nomadik/timer.c +++ /dev/null @@ -1,71 +0,0 @@ -/* - * (C) Copyright 2009 Alessandro Rubini - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/mtu.h> - -/* - * The timer is a decrementer, we'll left it free running at 2.4MHz. - * We have 2.4 ticks per microsecond and an overflow in almost 30min - */ -#define TIMER_CLOCK (24 * 100 * 1000) -#define COUNT_TO_USEC(x) ((x) * 5 / 12) /* overflows at 6min */ -#define USEC_TO_COUNT(x) ((x) * 12 / 5) /* overflows at 6min */ -#define TICKS_PER_HZ (TIMER_CLOCK / CONFIG_SYS_HZ) -#define TICKS_TO_HZ(x) ((x) / TICKS_PER_HZ) - -/* macro to read the decrementing 32 bit timer as an increasing count */ -#define READ_TIMER() (0 - readl(CONFIG_SYS_TIMERBASE + MTU_VAL(0))) - -/* Configure a free-running, auto-wrap counter with no prescaler */ -int timer_init(void) -{ - ulong val; - - writel(MTU_CRn_ENA | MTU_CRn_PRESCALE_1 | MTU_CRn_32BITS, - CONFIG_SYS_TIMERBASE + MTU_CR(0)); - - /* Reset the timer */ - writel(0, CONFIG_SYS_TIMERBASE + MTU_LR(0)); - /* - * The load-register isn't really immediate: it changes on clock - * edges, so we must wait for our newly-written value to appear. - * Since we might miss reading 0, wait for any change in value. - */ - val = READ_TIMER(); - while (READ_TIMER() == val) - ; - - return 0; -} - -/* Return how many HZ passed since "base" */ -ulong get_timer(ulong base) -{ - return TICKS_TO_HZ(READ_TIMER()) - base; -} - -/* Delay x useconds */ -void __udelay(unsigned long usec) -{ - ulong ini, end; - - ini = READ_TIMER(); - end = ini + USEC_TO_COUNT(usec); - while ((signed)(end - READ_TIMER()) > 0) - ; -} - -unsigned long long get_ticks(void) -{ - return get_timer(0); -} - -ulong get_tbclk(void) -{ - return CONFIG_SYS_HZ; -} diff --git a/arch/arm/cpu/arm926ejs/orion5x/Kconfig b/arch/arm/cpu/arm926ejs/orion5x/Kconfig deleted file mode 100644 index 5a542629c7..0000000000 --- a/arch/arm/cpu/arm926ejs/orion5x/Kconfig +++ /dev/null @@ -1,16 +0,0 @@ -if ORION5X - -choice - prompt "Marvell Orion board select" - -config TARGET_EDMINIV2 - bool "LaCie Ethernet Disk mini V2" - -endchoice - -config SYS_SOC - default "orion5x" - -source "board/LaCie/edminiv2/Kconfig" - -endif diff --git a/arch/arm/cpu/arm926ejs/orion5x/Makefile b/arch/arm/cpu/arm926ejs/orion5x/Makefile deleted file mode 100644 index 546ebcb52e..0000000000 --- a/arch/arm/cpu/arm926ejs/orion5x/Makefile +++ /dev/null @@ -1,18 +0,0 @@ -# -# Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net> -# -# Based on original Kirkwood support which is -# (C) Copyright 2009 -# Marvell Semiconductor <www.marvell.com> -# Written-by: Prafulla Wadaskar <prafulla@marvell.com> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = cpu.o -obj-y += dram.o -obj-y += timer.o - -ifndef CONFIG_SKIP_LOWLEVEL_INIT -obj-y += lowlevel_init.o -endif diff --git a/arch/arm/cpu/arm926ejs/orion5x/cpu.c b/arch/arm/cpu/arm926ejs/orion5x/cpu.c deleted file mode 100644 index f88db3b1f9..0000000000 --- a/arch/arm/cpu/arm926ejs/orion5x/cpu.c +++ /dev/null @@ -1,294 +0,0 @@ -/* - * Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net> - * - * Based on original Kirkwood support which is - * (C) Copyright 2009 - * Marvell Semiconductor <www.marvell.com> - * Written-by: Prafulla Wadaskar <prafulla@marvell.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <netdev.h> -#include <asm/cache.h> -#include <asm/io.h> -#include <u-boot/md5.h> -#include <asm/arch/cpu.h> - -#define BUFLEN 16 - -void reset_cpu(unsigned long ignored) -{ - struct orion5x_cpu_registers *cpureg = - (struct orion5x_cpu_registers *)ORION5X_CPU_REG_BASE; - - writel(readl(&cpureg->rstoutn_mask) | (1 << 2), - &cpureg->rstoutn_mask); - writel(readl(&cpureg->sys_soft_rst) | 1, - &cpureg->sys_soft_rst); - while (1) - ; -} - -/* - * Compute Window Size field value from size expressed in bytes - * Used with the Base register to set the address window size and location. - * Must be programmed from LSB to MSB as sequence of ones followed by - * sequence of zeros. The number of ones specifies the size of the window in - * 64 KiB granularity (e.g., a value of 0x00FF specifies 256 = 16 MiB). - * NOTES: - * 1) A sizeval equal to 0x0 specifies 4 GiB. - * 2) A return value of 0x0 specifies 64 KiB. - */ -unsigned int orion5x_winctrl_calcsize(unsigned int sizeval) -{ - /* - * Calculate the number of 64 KiB blocks needed minus one (rounding up). - * For sizeval > 0 this is equivalent to: - * sizeval = (u32) ceil((double) sizeval / 65536.0) - 1 - */ - sizeval = (sizeval - 1) >> 16; - - /* - * Propagate 'one' bits to the right by 'oring' them. - * We need only treat bits 15-0. - */ - sizeval |= sizeval >> 1; /* 'Or' bit 15 onto bit 14 */ - sizeval |= sizeval >> 2; /* 'Or' bits 15-14 onto bits 13-12 */ - sizeval |= sizeval >> 4; /* 'Or' bits 15-12 onto bits 11-8 */ - sizeval |= sizeval >> 8; /* 'Or' bits 15-8 onto bits 7-0*/ - - return sizeval; -} - -/* - * orion5x_config_adr_windows - Configure address Windows - * - * There are 8 address windows supported by Orion5x Soc to addess different - * devices. Each window can be configured for size, BAR and remap addr - * Below configuration is standard for most of the cases - * - * If remap function not used, remap_lo must be set as base - * - * NOTES: - * - * 1) in order to avoid windows with inconsistent control and base values - * (which could prevent access to BOOTCS and hence execution from FLASH) - * always disable window before writing the base value then reenable it - * by writing the control value. - * - * 2) in order to avoid losing access to BOOTCS when disabling window 7, - * first configure window 6 for BOOTCS, then configure window 7 for BOOTCS, - * then configure windows 6 for its own target. - * - * Reference Documentation: - * Mbus-L to Mbus Bridge Registers Configuration. - * (Sec 25.1 and 25.3 of Datasheet) - */ -int orion5x_config_adr_windows(void) -{ - struct orion5x_win_registers *winregs = - (struct orion5x_win_registers *)ORION5X_CPU_WIN_BASE; - -/* Disable window 0, configure it for its intended target, enable it. */ - writel(0, &winregs[0].ctrl); - writel(ORION5X_ADR_PCIE_MEM, &winregs[0].base); - writel(ORION5X_ADR_PCIE_MEM_REMAP_LO, &winregs[0].remap_lo); - writel(ORION5X_ADR_PCIE_MEM_REMAP_HI, &winregs[0].remap_hi); - writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_PCIE_MEM, - ORION5X_TARGET_PCIE, ORION5X_ATTR_PCIE_MEM, - ORION5X_WIN_ENABLE), &winregs[0].ctrl); -/* Disable window 1, configure it for its intended target, enable it. */ - writel(0, &winregs[1].ctrl); - writel(ORION5X_ADR_PCIE_IO, &winregs[1].base); - writel(ORION5X_ADR_PCIE_IO_REMAP_LO, &winregs[1].remap_lo); - writel(ORION5X_ADR_PCIE_IO_REMAP_HI, &winregs[1].remap_hi); - writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_PCIE_IO, - ORION5X_TARGET_PCIE, ORION5X_ATTR_PCIE_IO, - ORION5X_WIN_ENABLE), &winregs[1].ctrl); -/* Disable window 2, configure it for its intended target, enable it. */ - writel(0, &winregs[2].ctrl); - writel(ORION5X_ADR_PCI_MEM, &winregs[2].base); - writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_PCI_MEM, - ORION5X_TARGET_PCI, ORION5X_ATTR_PCI_MEM, - ORION5X_WIN_ENABLE), &winregs[2].ctrl); -/* Disable window 3, configure it for its intended target, enable it. */ - writel(0, &winregs[3].ctrl); - writel(ORION5X_ADR_PCI_IO, &winregs[3].base); - writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_PCI_IO, - ORION5X_TARGET_PCI, ORION5X_ATTR_PCI_IO, - ORION5X_WIN_ENABLE), &winregs[3].ctrl); -/* Disable window 4, configure it for its intended target, enable it. */ - writel(0, &winregs[4].ctrl); - writel(ORION5X_ADR_DEV_CS0, &winregs[4].base); - writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_DEV_CS0, - ORION5X_TARGET_DEVICE, ORION5X_ATTR_DEV_CS0, - ORION5X_WIN_ENABLE), &winregs[4].ctrl); -/* Disable window 5, configure it for its intended target, enable it. */ - writel(0, &winregs[5].ctrl); - writel(ORION5X_ADR_DEV_CS1, &winregs[5].base); - writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_DEV_CS1, - ORION5X_TARGET_DEVICE, ORION5X_ATTR_DEV_CS1, - ORION5X_WIN_ENABLE), &winregs[5].ctrl); -/* Disable window 6, configure it for FLASH, enable it. */ - writel(0, &winregs[6].ctrl); - writel(ORION5X_ADR_BOOTROM, &winregs[6].base); - writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_BOOTROM, - ORION5X_TARGET_DEVICE, ORION5X_ATTR_BOOTROM, - ORION5X_WIN_ENABLE), &winregs[6].ctrl); -/* Disable window 7, configure it for FLASH, enable it. */ - writel(0, &winregs[7].ctrl); - writel(ORION5X_ADR_BOOTROM, &winregs[7].base); - writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_BOOTROM, - ORION5X_TARGET_DEVICE, ORION5X_ATTR_BOOTROM, - ORION5X_WIN_ENABLE), &winregs[7].ctrl); -/* Disable window 6, configure it for its intended target, enable it. */ - writel(0, &winregs[6].ctrl); - writel(ORION5X_ADR_DEV_CS2, &winregs[6].base); - writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_DEV_CS2, - ORION5X_TARGET_DEVICE, ORION5X_ATTR_DEV_CS2, - ORION5X_WIN_ENABLE), &winregs[6].ctrl); - - return 0; -} - -/* - * Orion5x identification is done through PCIE space. - */ - -u32 orion5x_device_id(void) -{ - return readl(PCIE_DEV_ID_OFF) >> 16; -} - -u32 orion5x_device_rev(void) -{ - return readl(PCIE_DEV_REV_OFF) & 0xff; -} - -#if defined(CONFIG_DISPLAY_CPUINFO) - -/* Display device and revision IDs. - * This function must cover all known device/revision - * combinations, not only the one for which u-boot is - * compiled; this way, one can identify actual HW in - * case of a mismatch. - */ -int print_cpuinfo(void) -{ - char dev_str[7]; /* room enough for 0x0000 plus null byte */ - char rev_str[5]; /* room enough for 0x00 plus null byte */ - char *dev_name = NULL; - char *rev_name = NULL; - - u32 dev = orion5x_device_id(); - u32 rev = orion5x_device_rev(); - - if (dev == MV88F5181_DEV_ID) { - dev_name = "MV88F5181"; - if (rev == MV88F5181_REV_B1) - rev_name = "B1"; - else if (rev == MV88F5181L_REV_A1) { - dev_name = "MV88F5181L"; - rev_name = "A1"; - } else if (rev == MV88F5181L_REV_A0) { - dev_name = "MV88F5181L"; - rev_name = "A0"; - } - } else if (dev == MV88F5182_DEV_ID) { - dev_name = "MV88F5182"; - if (rev == MV88F5182_REV_A2) - rev_name = "A2"; - } else if (dev == MV88F5281_DEV_ID) { - dev_name = "MV88F5281"; - if (rev == MV88F5281_REV_D2) - rev_name = "D2"; - else if (rev == MV88F5281_REV_D1) - rev_name = "D1"; - else if (rev == MV88F5281_REV_D0) - rev_name = "D0"; - } else if (dev == MV88F6183_DEV_ID) { - dev_name = "MV88F6183"; - if (rev == MV88F6183_REV_B0) - rev_name = "B0"; - } - if (dev_name == NULL) { - sprintf(dev_str, "0x%04x", dev); - dev_name = dev_str; - } - if (rev_name == NULL) { - sprintf(rev_str, "0x%02x", rev); - rev_name = rev_str; - } - - printf("SoC: Orion5x %s-%s\n", dev_name, rev_name); - - return 0; -} -#endif /* CONFIG_DISPLAY_CPUINFO */ - -#ifdef CONFIG_ARCH_CPU_INIT -int arch_cpu_init(void) -{ - /* Enable and invalidate L2 cache in write through mode */ - invalidate_l2_cache(); - - orion5x_config_adr_windows(); - - return 0; -} -#endif /* CONFIG_ARCH_CPU_INIT */ - -/* - * SOC specific misc init - */ -#if defined(CONFIG_ARCH_MISC_INIT) -int arch_misc_init(void) -{ - u32 temp; - - /*CPU streaming & write allocate */ - temp = readfr_extra_feature_reg(); - temp &= ~(1 << 28); /* disable wr alloc */ - writefr_extra_feature_reg(temp); - - temp = readfr_extra_feature_reg(); - temp &= ~(1 << 29); /* streaming disabled */ - writefr_extra_feature_reg(temp); - - /* L2Cache settings */ - temp = readfr_extra_feature_reg(); - /* Disable L2C pre fetch - Set bit 24 */ - temp |= (1 << 24); - /* enable L2C - Set bit 22 */ - temp |= (1 << 22); - writefr_extra_feature_reg(temp); - - icache_enable(); - /* Change reset vector to address 0x0 */ - temp = get_cr(); - set_cr(temp & ~CR_V); - - /* Set CPIOs and MPPs - values provided by board - include file */ - writel(ORION5X_MPP0_7, ORION5X_MPP_BASE+0x00); - writel(ORION5X_MPP8_15, ORION5X_MPP_BASE+0x04); - writel(ORION5X_MPP16_23, ORION5X_MPP_BASE+0x50); - writel(ORION5X_GPIO_OUT_VALUE, ORION5X_GPIO_BASE+0x00); - writel(ORION5X_GPIO_OUT_ENABLE, ORION5X_GPIO_BASE+0x04); - writel(ORION5X_GPIO_IN_POLARITY, ORION5X_GPIO_BASE+0x0c); - - /* initialize timer */ - timer_init_r(); - return 0; -} -#endif /* CONFIG_ARCH_MISC_INIT */ - -#ifdef CONFIG_MVGBE -int cpu_eth_init(bd_t *bis) -{ - mvgbe_initialize(bis); - return 0; -} -#endif diff --git a/arch/arm/cpu/arm926ejs/orion5x/dram.c b/arch/arm/cpu/arm926ejs/orion5x/dram.c deleted file mode 100644 index 9ed93d25bc..0000000000 --- a/arch/arm/cpu/arm926ejs/orion5x/dram.c +++ /dev/null @@ -1,55 +0,0 @@ -/* - * Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net> - * - * Based on original Kirkwood support which is - * (C) Copyright 2009 - * Marvell Semiconductor <www.marvell.com> - * Written-by: Prafulla Wadaskar <prafulla@marvell.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <config.h> -#include <asm/arch/cpu.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* - * orion5x_sdram_bar - reads SDRAM Base Address Register - */ -u32 orion5x_sdram_bar(enum memory_bank bank) -{ - struct orion5x_ddr_addr_decode_registers *winregs = - (struct orion5x_ddr_addr_decode_registers *) - ORION5X_DRAM_BASE; - - u32 result = 0; - u32 enable = 0x01 & winregs[bank].size; - - if ((!enable) || (bank > BANK3)) - return 0; - - result = winregs[bank].base; - return result; -} -int dram_init (void) -{ - /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size( - (long *) orion5x_sdram_bar(0), - CONFIG_MAX_RAM_BANK_SIZE); - return 0; -} - -void dram_init_banksize (void) -{ - int i; - - for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { - gd->bd->bi_dram[i].start = orion5x_sdram_bar(i); - gd->bd->bi_dram[i].size = get_ram_size( - (long *) (gd->bd->bi_dram[i].start), - CONFIG_MAX_RAM_BANK_SIZE); - } -} diff --git a/arch/arm/cpu/arm926ejs/orion5x/lowlevel_init.S b/arch/arm/cpu/arm926ejs/orion5x/lowlevel_init.S deleted file mode 100644 index 4dacc296e4..0000000000 --- a/arch/arm/cpu/arm926ejs/orion5x/lowlevel_init.S +++ /dev/null @@ -1,277 +0,0 @@ -/* - * Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net> - * - * (C) Copyright 2009 - * Marvell Semiconductor <www.marvell.com> - * Written-by: Prafulla Wadaskar <prafulla@marvell.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <config.h> -#include "asm/arch/orion5x.h" - -/* - * Configuration values for SDRAM access setup - */ - -#define SDRAM_CONFIG 0x3148400 -#define SDRAM_MODE 0x62 -#define SDRAM_CONTROL 0x4041000 -#define SDRAM_TIME_CTRL_LOW 0x11602220 -#define SDRAM_TIME_CTRL_HI 0x40c -#define SDRAM_OPEN_PAGE_EN 0x0 -/* DDR 1 2x 32M NANYA NT5DS16M16CS-6K ==> 64MB */ -#define SDRAM_BANK0_SIZE 0x3ff0001 -#define SDRAM_ADDR_CTRL 0x10 - -#define SDRAM_OP_NOP 0x05 -#define SDRAM_OP_SETMODE 0x03 - -#define SDRAM_PAD_CTRL_WR_EN 0x80000000 -#define SDRAM_PAD_CTRL_TUNE_EN 0x00010000 -#define SDRAM_PAD_CTRL_DRVN_MASK 0x0000003f -#define SDRAM_PAD_CTRL_DRVP_MASK 0x00000fc0 - -/* - * For Guideline MEM-3 - Drive Strength value - */ - -#define DDR1_PAD_STRENGTH_DEFAULT 0x00001000 -#define SDRAM_PAD_CTRL_DRV_STR_MASK 0x00003000 - -/* - * For Guideline MEM-4 - DQS Reference Delay Tuning - */ - -#define MSAR_ARMDDRCLCK_MASK 0x000000f0 -#define MSAR_ARMDDRCLCK_H_MASK 0x00000100 - -#define MSAR_ARMDDRCLCK_333_167 0x00000000 -#define MSAR_ARMDDRCLCK_500_167 0x00000030 -#define MSAR_ARMDDRCLCK_667_167 0x00000060 -#define MSAR_ARMDDRCLCK_400_200_1 0x000001E0 -#define MSAR_ARMDDRCLCK_400_200 0x00000010 -#define MSAR_ARMDDRCLCK_600_200 0x00000050 -#define MSAR_ARMDDRCLCK_800_200 0x00000070 - -#define FTDLL_DDR1_166MHZ 0x0047F001 - -#define FTDLL_DDR1_200MHZ 0x0044D001 - -/* - * Low-level init happens right after start.S has switched to SVC32, - * flushed and disabled caches and disabled MMU. We're still running - * from the boot chip select, so the first thing we should do is set - * up RAM for us to relocate into. - */ - -.globl lowlevel_init - -lowlevel_init: - - /* Use 'r4 as the base for internal register accesses */ - ldr r4, =ORION5X_REGS_PHY_BASE - - /* move internal registers from the default 0xD0000000 - * to their intended location, defined by SoC */ - ldr r3, =0xD0000000 - add r3, r3, #0x20000 - str r4, [r3, #0x80] - - /* Use R3 as the base for DRAM registers */ - add r3, r4, #0x01000 - - /*DDR SDRAM Initialization Control */ - ldr r6, =0x00000001 - str r6, [r3, #0x480] - - /* Use R3 as the base for PCI registers */ - add r3, r4, #0x31000 - - /* Disable arbiter */ - ldr r6, =0x00000030 - str r6, [r3, #0xd00] - - /* Use R3 as the base for DRAM registers */ - add r3, r4, #0x01000 - - /* set all dram windows to 0 */ - mov r6, #0 - str r6, [r3, #0x504] - str r6, [r3, #0x50C] - str r6, [r3, #0x514] - str r6, [r3, #0x51C] - - /* 1) Configure SDRAM */ - ldr r6, =SDRAM_CONFIG - str r6, [r3, #0x400] - - /* 2) Set SDRAM Control reg */ - ldr r6, =SDRAM_CONTROL - str r6, [r3, #0x404] - - /* 3) Write SDRAM address control register */ - ldr r6, =SDRAM_ADDR_CTRL - str r6, [r3, #0x410] - - /* 4) Write SDRAM bank 0 size register */ - ldr r6, =SDRAM_BANK0_SIZE - str r6, [r3, #0x504] - /* keep other banks disabled */ - - /* 5) Write SDRAM open pages control register */ - ldr r6, =SDRAM_OPEN_PAGE_EN - str r6, [r3, #0x414] - - /* 6) Write SDRAM timing Low register */ - ldr r6, =SDRAM_TIME_CTRL_LOW - str r6, [r3, #0x408] - - /* 7) Write SDRAM timing High register */ - ldr r6, =SDRAM_TIME_CTRL_HI - str r6, [r3, #0x40C] - - /* 8) Write SDRAM mode register */ - /* The CPU must not attempt to change the SDRAM Mode register setting */ - /* prior to DRAM controller completion of the DRAM initialization */ - /* sequence. To guarantee this restriction, it is recommended that */ - /* the CPU sets the SDRAM Operation register to NOP command, performs */ - /* read polling until the register is back in Normal operation value, */ - /* and then sets SDRAM Mode register to its new value. */ - - /* 8.1 write 'nop' to SDRAM operation */ - ldr r6, =SDRAM_OP_NOP - str r6, [r3, #0x418] - - /* 8.2 poll SDRAM operation until back in 'normal' mode. */ -1: - ldr r6, [r3, #0x418] - cmp r6, #0 - bne 1b - - /* 8.3 Now its safe to write new value to SDRAM Mode register */ - ldr r6, =SDRAM_MODE - str r6, [r3, #0x41C] - - /* 8.4 Set new mode */ - ldr r6, =SDRAM_OP_SETMODE - str r6, [r3, #0x418] - - /* 8.5 poll SDRAM operation until back in 'normal' mode. */ -2: - ldr r6, [r3, #0x418] - cmp r6, #0 - bne 2b - - /* DDR SDRAM Address/Control Pads Calibration */ - ldr r6, [r3, #0x4C0] - - /* Set Bit [31] to make the register writable */ - orr r6, r6, #SDRAM_PAD_CTRL_WR_EN - str r6, [r3, #0x4C0] - - bic r6, r6, #SDRAM_PAD_CTRL_WR_EN - bic r6, r6, #SDRAM_PAD_CTRL_TUNE_EN - bic r6, r6, #SDRAM_PAD_CTRL_DRVN_MASK - bic r6, r6, #SDRAM_PAD_CTRL_DRVP_MASK - - /* Get the final N locked value of driving strength [22:17] */ - mov r1, r6 - mov r1, r1, LSL #9 - mov r1, r1, LSR #26 /* r1[5:0]<DrvN> = r3[22:17]<LockN> */ - orr r1, r1, r1, LSL #6 /* r1[11:6]<DrvP> = r1[5:0]<DrvN> */ - - /* Write to both <DrvN> bits [5:0] and <DrvP> bits [11:6] */ - orr r6, r6, r1 - str r6, [r3, #0x4C0] - - /* DDR SDRAM Data Pads Calibration */ - ldr r6, [r3, #0x4C4] - - /* Set Bit [31] to make the register writable */ - orr r6, r6, #SDRAM_PAD_CTRL_WR_EN - str r6, [r3, #0x4C4] - - bic r6, r6, #SDRAM_PAD_CTRL_WR_EN - bic r6, r6, #SDRAM_PAD_CTRL_TUNE_EN - bic r6, r6, #SDRAM_PAD_CTRL_DRVN_MASK - bic r6, r6, #SDRAM_PAD_CTRL_DRVP_MASK - - /* Get the final N locked value of driving strength [22:17] */ - mov r1, r6 - mov r1, r1, LSL #9 - mov r1, r1, LSR #26 - orr r1, r1, r1, LSL #6 /* r1[5:0] = r3[22:17]<LockN> */ - - /* Write to both <DrvN> bits [5:0] and <DrvP> bits [11:6] */ - orr r6, r6, r1 - - str r6, [r3, #0x4C4] - - /* Implement Guideline (GL# MEM-3) Drive Strength Value */ - /* Relevant for: 88F5181-A1/B0/B1 and 88F5281-A0/B0 */ - - ldr r1, =DDR1_PAD_STRENGTH_DEFAULT - - /* Enable writes to DDR SDRAM Addr/Ctrl Pads Calibration register */ - ldr r6, [r3, #0x4C0] - orr r6, r6, #SDRAM_PAD_CTRL_WR_EN - str r6, [r3, #0x4C0] - - /* Correct strength and disable writes again */ - bic r6, r6, #SDRAM_PAD_CTRL_WR_EN - bic r6, r6, #SDRAM_PAD_CTRL_DRV_STR_MASK - orr r6, r6, r1 - str r6, [r3, #0x4C0] - - /* Enable writes to DDR SDRAM Data Pads Calibration register */ - ldr r6, [r3, #0x4C4] - orr r6, r6, #SDRAM_PAD_CTRL_WR_EN - str r6, [r3, #0x4C4] - - /* Correct strength and disable writes again */ - bic r6, r6, #SDRAM_PAD_CTRL_DRV_STR_MASK - bic r6, r6, #SDRAM_PAD_CTRL_WR_EN - orr r6, r6, r1 - str r6, [r3, #0x4C4] - - /* Implement Guideline (GL# MEM-4) DQS Reference Delay Tuning */ - /* Relevant for: 88F5181-A1/B0/B1 and 88F5281-A0/B0 */ - - /* Get the "sample on reset" register for the DDR frequancy */ - ldr r3, =0x10000 - ldr r6, [r3, #0x010] - ldr r1, =MSAR_ARMDDRCLCK_MASK - and r1, r6, r1 - - ldr r6, =FTDLL_DDR1_166MHZ - cmp r1, #MSAR_ARMDDRCLCK_333_167 - beq 3f - cmp r1, #MSAR_ARMDDRCLCK_500_167 - beq 3f - cmp r1, #MSAR_ARMDDRCLCK_667_167 - beq 3f - - ldr r6, =FTDLL_DDR1_200MHZ - cmp r1, #MSAR_ARMDDRCLCK_400_200_1 - beq 3f - cmp r1, #MSAR_ARMDDRCLCK_400_200 - beq 3f - cmp r1, #MSAR_ARMDDRCLCK_600_200 - beq 3f - cmp r1, #MSAR_ARMDDRCLCK_800_200 - beq 3f - - ldr r6, =0 - -3: - /* Use R3 as the base for DRAM registers */ - add r3, r4, #0x01000 - - ldr r2, [r3, #0x484] - orr r2, r2, r6 - str r2, [r3, #0x484] - - /* Return to U-boot via saved link register */ - mov pc, lr diff --git a/arch/arm/cpu/arm926ejs/orion5x/timer.c b/arch/arm/cpu/arm926ejs/orion5x/timer.c deleted file mode 100644 index ec4f6bee8e..0000000000 --- a/arch/arm/cpu/arm926ejs/orion5x/timer.c +++ /dev/null @@ -1,171 +0,0 @@ -/* - * Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net> - * - * Based on original Kirkwood support which is - * Copyright (C) Marvell International Ltd. and its affiliates - * Written-by: Prafulla Wadaskar <prafulla@marvell.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> - -#define UBOOT_CNTR 0 /* counter to use for uboot timer */ - -/* Timer reload and current value registers */ -struct orion5x_tmr_val { - u32 reload; /* Timer reload reg */ - u32 val; /* Timer value reg */ -}; - -/* Timer registers */ -struct orion5x_tmr_registers { - u32 ctrl; /* Timer control reg */ - u32 pad[3]; - struct orion5x_tmr_val tmr[2]; - u32 wdt_reload; - u32 wdt_val; -}; - -struct orion5x_tmr_registers *orion5x_tmr_regs = - (struct orion5x_tmr_registers *)ORION5X_TIMER_BASE; - -/* - * ARM Timers Registers Map - */ -#define CNTMR_CTRL_REG (&orion5x_tmr_regs->ctrl) -#define CNTMR_RELOAD_REG(tmrnum) (&orion5x_tmr_regs->tmr[tmrnum].reload) -#define CNTMR_VAL_REG(tmrnum) (&orion5x_tmr_regs->tmr[tmrnum].val) - -/* - * ARM Timers Control Register - * CPU_TIMERS_CTRL_REG (CTCR) - */ -#define CTCR_ARM_TIMER_EN_OFFS(cntr) (cntr * 2) -#define CTCR_ARM_TIMER_EN_MASK(cntr) (1 << CTCR_ARM_TIMER_EN_OFFS) -#define CTCR_ARM_TIMER_EN(cntr) (1 << CTCR_ARM_TIMER_EN_OFFS(cntr)) -#define CTCR_ARM_TIMER_DIS(cntr) (0 << CTCR_ARM_TIMER_EN_OFFS(cntr)) - -#define CTCR_ARM_TIMER_AUTO_OFFS(cntr) ((cntr * 2) + 1) -#define CTCR_ARM_TIMER_AUTO_MASK(cntr) (1 << 1) -#define CTCR_ARM_TIMER_AUTO_EN(cntr) (1 << CTCR_ARM_TIMER_AUTO_OFFS(cntr)) -#define CTCR_ARM_TIMER_AUTO_DIS(cntr) (0 << CTCR_ARM_TIMER_AUTO_OFFS(cntr)) - -/* - * ARM Timer\Watchdog Reload Register - * CNTMR_RELOAD_REG (TRR) - */ -#define TRG_ARM_TIMER_REL_OFFS 0 -#define TRG_ARM_TIMER_REL_MASK 0xffffffff - -/* - * ARM Timer\Watchdog Register - * CNTMR_VAL_REG (TVRG) - */ -#define TVR_ARM_TIMER_OFFS 0 -#define TVR_ARM_TIMER_MASK 0xffffffff -#define TVR_ARM_TIMER_MAX 0xffffffff -#define TIMER_LOAD_VAL 0xffffffff - -static inline ulong read_timer(void) -{ - return readl(CNTMR_VAL_REG(UBOOT_CNTR)) - / (CONFIG_SYS_TCLK / 1000); -} - -DECLARE_GLOBAL_DATA_PTR; - -#define timestamp gd->arch.tbl -#define lastdec gd->arch.lastinc - -ulong get_timer_masked(void) -{ - ulong now = read_timer(); - - if (lastdec >= now) { - /* normal mode */ - timestamp += lastdec - now; - } else { - /* we have an overflow ... */ - timestamp += lastdec + - (TIMER_LOAD_VAL / (CONFIG_SYS_TCLK / 1000)) - now; - } - lastdec = now; - - return timestamp; -} - -ulong get_timer(ulong base) -{ - return get_timer_masked() - base; -} - -static inline ulong uboot_cntr_val(void) -{ - return readl(CNTMR_VAL_REG(UBOOT_CNTR)); -} - -void __udelay(unsigned long usec) -{ - uint current; - ulong delayticks; - - current = uboot_cntr_val(); - delayticks = (usec * (CONFIG_SYS_TCLK / 1000000)); - - if (current < delayticks) { - delayticks -= current; - while (uboot_cntr_val() < current) - ; - while ((TIMER_LOAD_VAL - delayticks) < uboot_cntr_val()) - ; - } else { - while (uboot_cntr_val() > (current - delayticks)) - ; - } -} - -/* - * init the counter - */ -int timer_init(void) -{ - unsigned int cntmrctrl; - - /* load value into timer */ - writel(TIMER_LOAD_VAL, CNTMR_RELOAD_REG(UBOOT_CNTR)); - writel(TIMER_LOAD_VAL, CNTMR_VAL_REG(UBOOT_CNTR)); - - /* enable timer in auto reload mode */ - cntmrctrl = readl(CNTMR_CTRL_REG); - cntmrctrl |= CTCR_ARM_TIMER_EN(UBOOT_CNTR); - cntmrctrl |= CTCR_ARM_TIMER_AUTO_EN(UBOOT_CNTR); - writel(cntmrctrl, CNTMR_CTRL_REG); - return 0; -} - -void timer_init_r(void) -{ - /* init the timestamp and lastdec value */ - lastdec = read_timer(); - timestamp = 0; -} - -/* - * This function is derived from PowerPC code (read timebase as long long). - * On ARM it just returns the timer value. - */ -unsigned long long get_ticks(void) -{ - return get_timer(0); -} - -/* - * This function is derived from PowerPC code (timebase clock frequency). - * On ARM it returns the number of timer ticks per second. - */ -ulong get_tbclk (void) -{ - return (ulong)CONFIG_SYS_HZ; -} diff --git a/arch/arm/cpu/arm926ejs/versatile/Kconfig b/arch/arm/cpu/arm926ejs/versatile/Kconfig deleted file mode 100644 index d2e76f4afc..0000000000 --- a/arch/arm/cpu/arm926ejs/versatile/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -if ARCH_VERSATILE - -config SYS_BOARD - default "versatile" - -config SYS_VENDOR - default "armltd" - -config SYS_SOC - default "versatile" - -config SYS_CONFIG_NAME - default "versatile" - -endif diff --git a/arch/arm/cpu/arm926ejs/versatile/Makefile b/arch/arm/cpu/arm926ejs/versatile/Makefile deleted file mode 100644 index 907f5161a8..0000000000 --- a/arch/arm/cpu/arm926ejs/versatile/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = timer.o -obj-y += reset.o diff --git a/arch/arm/cpu/arm926ejs/versatile/reset.S b/arch/arm/cpu/arm926ejs/versatile/reset.S deleted file mode 100644 index 1c557b0d91..0000000000 --- a/arch/arm/cpu/arm926ejs/versatile/reset.S +++ /dev/null @@ -1,29 +0,0 @@ -/* - * armboot - Startup Code for ARM926EJS CPU-core - * - * Copyright (c) 2003 Texas Instruments - * - * ----- Adapted for OMAP1610 OMAP730 from ARM925t code ------ - * - * Copyright (c) 2001 Marius Gröger <mag@sysgo.de> - * Copyright (c) 2002 Alex Züpke <azu@sysgo.de> - * Copyright (c) 2002 Gary Jennejohn <garyj@denx.de> - * Copyright (c) 2003 Richard Woodruff <r-woodruff2@ti.com> - * Copyright (c) 2003 Kshitij <kshitij@ti.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - - .align 5 -.globl reset_cpu -reset_cpu: - ldr r1, rstctl1 /* get clkm1 reset ctl */ - mov r3, #0x0 - strh r3, [r1] /* clear it */ - mov r3, #0x8 - strh r3, [r1] /* force dsp+arm reset */ -_loop_forever: - b _loop_forever - -rstctl1: - .word 0xfffece10 diff --git a/arch/arm/cpu/arm926ejs/versatile/timer.c b/arch/arm/cpu/arm926ejs/versatile/timer.c deleted file mode 100644 index 5d694d85ef..0000000000 --- a/arch/arm/cpu/arm926ejs/versatile/timer.c +++ /dev/null @@ -1,64 +0,0 @@ -/* - * (C) Copyright 2003 - * Texas Instruments <www.ti.com> - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Alex Zuepke <azu@sysgo.de> - * - * (C) Copyright 2002-2004 - * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> - * - * (C) Copyright 2004 - * Philippe Robin, ARM Ltd. <philippe.robin@arm.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> - -#define TIMER_ENABLE (1 << 7) -#define TIMER_MODE_MSK (1 << 6) -#define TIMER_MODE_FR (0 << 6) -#define TIMER_MODE_PD (1 << 6) - -#define TIMER_INT_EN (1 << 5) -#define TIMER_PRS_MSK (3 << 2) -#define TIMER_PRS_8S (1 << 3) -#define TIMER_SIZE_MSK (1 << 2) -#define TIMER_ONE_SHT (1 << 0) - -int timer_init (void) -{ - ulong tmr_ctrl_val; - - /* 1st disable the Timer */ - tmr_ctrl_val = *(volatile ulong *)(CONFIG_SYS_TIMERBASE + 8); - tmr_ctrl_val &= ~TIMER_ENABLE; - *(volatile ulong *)(CONFIG_SYS_TIMERBASE + 8) = tmr_ctrl_val; - - /* - * The Timer Control Register has one Undefined/Shouldn't Use Bit - * So we should do read/modify/write Operation - */ - - /* - * Timer Mode : Free Running - * Interrupt : Disabled - * Prescale : 8 Stage, Clk/256 - * Tmr Siz : 16 Bit Counter - * Tmr in Wrapping Mode - */ - tmr_ctrl_val = *(volatile ulong *)(CONFIG_SYS_TIMERBASE + 8); - tmr_ctrl_val &= ~(TIMER_MODE_MSK | TIMER_INT_EN | TIMER_PRS_MSK | TIMER_SIZE_MSK | TIMER_ONE_SHT ); - tmr_ctrl_val |= (TIMER_ENABLE | TIMER_PRS_8S); - - *(volatile ulong *)(CONFIG_SYS_TIMERBASE + 8) = tmr_ctrl_val; - - return 0; -} - |
