diff options
Diffstat (limited to 'arch/arm/cpu/arm720t/tegra30')
| -rw-r--r-- | arch/arm/cpu/arm720t/tegra30/Makefile | 20 | ||||
| -rw-r--r-- | arch/arm/cpu/arm720t/tegra30/cpu.c | 183 |
2 files changed, 0 insertions, 203 deletions
diff --git a/arch/arm/cpu/arm720t/tegra30/Makefile b/arch/arm/cpu/arm720t/tegra30/Makefile deleted file mode 100644 index 6ff4c55213..0000000000 --- a/arch/arm/cpu/arm720t/tegra30/Makefile +++ /dev/null @@ -1,20 +0,0 @@ -# -# Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved. -# -# (C) Copyright 2000-2008 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# This program is free software; you can redistribute it and/or modify it -# under the terms and conditions of the GNU General Public License, -# version 2, as published by the Free Software Foundation. -# -# This program is distributed in the hope it will be useful, but WITHOUT -# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -# more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. -# - -obj-y += cpu.o diff --git a/arch/arm/cpu/arm720t/tegra30/cpu.c b/arch/arm/cpu/arm720t/tegra30/cpu.c deleted file mode 100644 index 9003902e3f..0000000000 --- a/arch/arm/cpu/arm720t/tegra30/cpu.c +++ /dev/null @@ -1,183 +0,0 @@ -/* - * Copyright (c) 2010-2014, NVIDIA CORPORATION. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/clock.h> -#include <asm/arch/flow.h> -#include <asm/arch/tegra.h> -#include <asm/arch-tegra/clk_rst.h> -#include <asm/arch-tegra/pmc.h> -#include <asm/arch-tegra/tegra_i2c.h> -#include "../tegra-common/cpu.h" - -/* Tegra30-specific CPU init code */ -void tegra_i2c_ll_write_addr(uint addr, uint config) -{ - struct i2c_ctlr *reg = (struct i2c_ctlr *)TEGRA_DVC_BASE; - - writel(addr, ®->cmd_addr0); - writel(config, ®->cnfg); -} - -void tegra_i2c_ll_write_data(uint data, uint config) -{ - struct i2c_ctlr *reg = (struct i2c_ctlr *)TEGRA_DVC_BASE; - - writel(data, ®->cmd_data1); - writel(config, ®->cnfg); -} - -#define TPS62366A_I2C_ADDR 0xC0 -#define TPS62366A_SET1_REG 0x01 -#define TPS62366A_SET1_DATA (0x4600 | TPS62366A_SET1_REG) - -#define TPS62361B_I2C_ADDR 0xC0 -#define TPS62361B_SET3_REG 0x03 -#define TPS62361B_SET3_DATA (0x4600 | TPS62361B_SET3_REG) - -#define TPS65911_I2C_ADDR 0x5A -#define TPS65911_VDDCTRL_OP_REG 0x28 -#define TPS65911_VDDCTRL_SR_REG 0x27 -#define TPS65911_VDDCTRL_OP_DATA (0x2400 | TPS65911_VDDCTRL_OP_REG) -#define TPS65911_VDDCTRL_SR_DATA (0x0100 | TPS65911_VDDCTRL_SR_REG) -#define I2C_SEND_2_BYTES 0x0A02 - -static void enable_cpu_power_rail(void) -{ - struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; - u32 reg; - - debug("enable_cpu_power_rail entry\n"); - reg = readl(&pmc->pmc_cntrl); - reg |= CPUPWRREQ_OE; - writel(reg, &pmc->pmc_cntrl); - - /* Set VDD_CORE to 1.200V. */ -#ifdef CONFIG_TEGRA_VDD_CORE_TPS62366A_SET1 - tegra_i2c_ll_write_addr(TPS62366A_I2C_ADDR, 2); - tegra_i2c_ll_write_data(TPS62366A_SET1_DATA, I2C_SEND_2_BYTES); -#endif -#ifdef CONFIG_TEGRA_VDD_CORE_TPS62361B_SET3 - tegra_i2c_ll_write_addr(TPS62361B_I2C_ADDR, 2); - tegra_i2c_ll_write_data(TPS62361B_SET3_DATA, I2C_SEND_2_BYTES); -#endif - udelay(1000); - - /* - * Bring up CPU VDD via the TPS65911x PMIC on the DVC I2C bus. - * First set VDD to 1.0125V, then enable the VDD regulator. - */ - tegra_i2c_ll_write_addr(TPS65911_I2C_ADDR, 2); - tegra_i2c_ll_write_data(TPS65911_VDDCTRL_OP_DATA, I2C_SEND_2_BYTES); - udelay(1000); - tegra_i2c_ll_write_data(TPS65911_VDDCTRL_SR_DATA, I2C_SEND_2_BYTES); - udelay(10 * 1000); -} - -/** - * The T30 requires some special clock initialization, including setting up - * the dvc i2c, turning on mselect and selecting the G CPU cluster - */ -void t30_init_clocks(void) -{ - struct clk_rst_ctlr *clkrst = - (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; - struct flow_ctlr *flow = (struct flow_ctlr *)NV_PA_FLOW_BASE; - u32 val; - - debug("t30_init_clocks entry\n"); - /* Set active CPU cluster to G */ - clrbits_le32(flow->cluster_control, 1 << 0); - - writel(SUPER_SCLK_ENB_MASK, &clkrst->crc_super_sclk_div); - - val = (0 << CLK_SYS_RATE_HCLK_DISABLE_SHIFT) | - (1 << CLK_SYS_RATE_AHB_RATE_SHIFT) | - (0 << CLK_SYS_RATE_PCLK_DISABLE_SHIFT) | - (0 << CLK_SYS_RATE_APB_RATE_SHIFT); - writel(val, &clkrst->crc_clk_sys_rate); - - /* Put i2c, mselect in reset and enable clocks */ - reset_set_enable(PERIPH_ID_DVC_I2C, 1); - clock_set_enable(PERIPH_ID_DVC_I2C, 1); - reset_set_enable(PERIPH_ID_MSELECT, 1); - clock_set_enable(PERIPH_ID_MSELECT, 1); - - /* Switch MSELECT clock to PLLP (00) and use a divisor of 2 */ - clock_ll_set_source_divisor(PERIPH_ID_MSELECT, 0, 2); - - /* - * Our high-level clock routines are not available prior to - * relocation. We use the low-level functions which require a - * hard-coded divisor. Use CLK_M with divide by (n + 1 = 17) - */ - clock_ll_set_source_divisor(PERIPH_ID_DVC_I2C, 3, 16); - - /* - * Give clocks time to stabilize, then take i2c and mselect out of - * reset - */ - udelay(1000); - reset_set_enable(PERIPH_ID_DVC_I2C, 0); - reset_set_enable(PERIPH_ID_MSELECT, 0); -} - -static void set_cpu_running(int run) -{ - struct flow_ctlr *flow = (struct flow_ctlr *)NV_PA_FLOW_BASE; - - debug("set_cpu_running entry, run = %d\n", run); - writel(run ? FLOW_MODE_NONE : FLOW_MODE_STOP, &flow->halt_cpu_events); -} - -void start_cpu(u32 reset_vector) -{ - debug("start_cpu entry, reset_vector = %x\n", reset_vector); - t30_init_clocks(); - - /* Enable VDD_CPU */ - enable_cpu_power_rail(); - - set_cpu_running(0); - - /* Hold the CPUs in reset */ - reset_A9_cpu(1); - - /* Disable the CPU clock */ - enable_cpu_clock(0); - - /* Enable CoreSight */ - clock_enable_coresight(1); - - /* - * Set the entry point for CPU execution from reset, - * if it's a non-zero value. - */ - if (reset_vector) - writel(reset_vector, EXCEP_VECTOR_CPU_RESET_VECTOR); - - /* Enable the CPU clock */ - enable_cpu_clock(1); - - /* If the CPU doesn't already have power, power it up */ - powerup_cpu(); - - /* Take the CPU out of reset */ - reset_A9_cpu(0); - - set_cpu_running(1); -} |
