diff options
61 files changed, 8 insertions, 109 deletions
@@ -1067,7 +1067,6 @@ mx31pdk_nand_config : unconfig echo "#define CONFIG_NAND_U_BOOT" >> $(obj)include/config.h; \ else \ echo "#define CONFIG_SKIP_LOWLEVEL_INIT" >> $(obj)include/config.h; \ - echo "#define CONFIG_SKIP_RELOCATE_UBOOT" >> $(obj)include/config.h; \ fi @$(MKCONFIG) -n $@ -a mx31pdk arm arm1136 mx31pdk freescale mx31 @@ -2836,19 +2836,17 @@ Low Level (hardware related) configuration options: globally (CONFIG_CMD_MEM). - CONFIG_SKIP_LOWLEVEL_INIT -- CONFIG_SKIP_RELOCATE_UBOOT + [ARM only] If this variable is defined, then certain + low level initializations (like setting up the memory + controller) are omitted and/or U-Boot does not + relocate itself into RAM. - [ARM only] If these variables are defined, then - certain low level initializations (like setting up - the memory controller) are omitted and/or U-Boot does - not relocate itself into RAM. - Normally these variables MUST NOT be defined. The - only exception is when U-Boot is loaded (to RAM) by - some other boot loader or by a debugger which - performs these initializations itself. + Normally this variable MUST NOT be defined. The only + exception is when U-Boot is loaded (to RAM) by some + other boot loader or by a debugger which performs + these initializations itself. - CONFIG_PRELOADER - Modifies the behaviour of start.S when compiling a loader that is executed before the actual U-Boot. E.g. when compiling a NAND SPL. diff --git a/arch/arm/cpu/arm1136/start.S b/arch/arm/cpu/arm1136/start.S index 9f172b625d..aecc943c8e 100644 --- a/arch/arm/cpu/arm1136/start.S +++ b/arch/arm/cpu/arm1136/start.S @@ -215,7 +215,6 @@ stack_setup: cmp r0, r6 beq clear_bss -#ifndef CONFIG_SKIP_RELOCATE_UBOOT copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ stmia r6!, {r9-r10} /* copy to target address [r1] */ @@ -262,7 +261,6 @@ fixnext: cmp r2, r3 blo fixloop #endif -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ clear_bss: #ifndef CONFIG_PRELOADER @@ -295,9 +293,7 @@ jump_2_ram: ldr r0, _board_init_r_ofs adr r1, _start add lr, r0, r1 -#ifndef CONFIG_SKIP_RELOCATE_UBOOT add lr, lr, r9 -#endif /* setup parameters for board_init_r */ mov r0, r5 /* gd_t */ mov r1, r7 /* dest_addr */ diff --git a/arch/arm/cpu/arm1176/start.S b/arch/arm/cpu/arm1176/start.S index 1a2e5aa37e..f04d268881 100644 --- a/arch/arm/cpu/arm1176/start.S +++ b/arch/arm/cpu/arm1176/start.S @@ -281,7 +281,6 @@ stack_setup: cmp r0, r6 beq clear_bss -#ifndef CONFIG_SKIP_RELOCATE_UBOOT copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ stmia r6!, {r9-r10} /* copy to target address [r1] */ @@ -328,7 +327,6 @@ fixnext: cmp r2, r3 blo fixloop #endif -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ #ifdef CONFIG_ENABLE_MMU enable_mmu: @@ -399,9 +397,7 @@ _nand_boot: .word nand_boot ldr r0, _board_init_r_ofs adr r1, _start add lr, r0, r1 -#ifndef CONFIG_SKIP_RELOCATE_UBOOT add lr, lr, r9 -#endif /* setup parameters for board_init_r */ mov r0, r5 /* gd_t */ mov r1, r7 /* dest_addr */ diff --git a/arch/arm/cpu/arm720t/start.S b/arch/arm/cpu/arm720t/start.S index b94ecb4353..8cd267b352 100644 --- a/arch/arm/cpu/arm720t/start.S +++ b/arch/arm/cpu/arm720t/start.S @@ -190,7 +190,6 @@ stack_setup: cmp r0, r6 beq clear_bss -#ifndef CONFIG_SKIP_RELOCATE_UBOOT copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ stmia r6!, {r9-r10} /* copy to target address [r1] */ @@ -217,7 +216,6 @@ fixloop: cmp r2, r3 blo fixloop #endif -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ clear_bss: #ifndef CONFIG_PRELOADER diff --git a/arch/arm/cpu/arm920t/start.S b/arch/arm/cpu/arm920t/start.S index 08d4e7bc3d..d4edde797b 100644 --- a/arch/arm/cpu/arm920t/start.S +++ b/arch/arm/cpu/arm920t/start.S @@ -236,7 +236,6 @@ stack_setup: cmp r0, r6 beq clear_bss -#ifndef CONFIG_SKIP_RELOCATE_UBOOT copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ stmia r6!, {r9-r10} /* copy to target address [r1] */ @@ -263,7 +262,6 @@ fixloop: cmp r2, r3 blo fixloop #endif -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ clear_bss: #ifndef CONFIG_PRELOADER diff --git a/arch/arm/cpu/arm925t/start.S b/arch/arm/cpu/arm925t/start.S index 6792a22aff..51229c6154 100644 --- a/arch/arm/cpu/arm925t/start.S +++ b/arch/arm/cpu/arm925t/start.S @@ -227,7 +227,6 @@ stack_setup: cmp r0, r6 beq clear_bss -#ifndef CONFIG_SKIP_RELOCATE_UBOOT copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ stmia r6!, {r9-r10} /* copy to target address [r1] */ @@ -254,7 +253,6 @@ fixloop: cmp r2, r3 blo fixloop #endif -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ clear_bss: #ifndef CONFIG_PRELOADER diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S index 4f689c1ef5..6dcc9b4d67 100644 --- a/arch/arm/cpu/arm926ejs/start.S +++ b/arch/arm/cpu/arm926ejs/start.S @@ -204,7 +204,6 @@ stack_setup: cmp r0, r6 beq clear_bss -#ifndef CONFIG_SKIP_RELOCATE_UBOOT copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ stmia r6!, {r9-r10} /* copy to target address [r1] */ @@ -251,7 +250,6 @@ fixnext: cmp r2, r3 blo fixloop #endif -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ clear_bss: #ifndef CONFIG_PRELOADER @@ -286,9 +284,7 @@ _nand_boot_ofs: ldr r0, _board_init_r_ofs adr r1, _start add lr, r0, r1 -#ifndef CONFIG_SKIP_RELOCATE_UBOOT add lr, lr, r9 -#endif /* setup parameters for board_init_r */ mov r0, r5 /* gd_t */ mov r1, r7 /* dest_addr */ diff --git a/arch/arm/cpu/arm946es/start.S b/arch/arm/cpu/arm946es/start.S index 7378edc41c..cad43ba048 100644 --- a/arch/arm/cpu/arm946es/start.S +++ b/arch/arm/cpu/arm946es/start.S @@ -196,7 +196,6 @@ stack_setup: cmp r0, r6 beq clear_bss -#ifndef CONFIG_SKIP_RELOCATE_UBOOT copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ stmia r6!, {r9-r10} /* copy to target address [r1] */ @@ -223,7 +222,6 @@ fixloop: cmp r2, r3 blo fixloop #endif -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ clear_bss: #ifndef CONFIG_PRELOADER diff --git a/arch/arm/cpu/arm_intcm/start.S b/arch/arm/cpu/arm_intcm/start.S index 2240f3a524..957ca34766 100644 --- a/arch/arm/cpu/arm_intcm/start.S +++ b/arch/arm/cpu/arm_intcm/start.S @@ -194,7 +194,6 @@ stack_setup: cmp r0, r6 beq clear_bss -#ifndef CONFIG_SKIP_RELOCATE_UBOOT copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ stmia r6!, {r9-r10} /* copy to target address [r1] */ @@ -221,7 +220,6 @@ fixloop: cmp r2, r3 blo fixloop #endif -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ clear_bss: #ifndef CONFIG_PRELOADER diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S index 4a0710c96d..bb3948d401 100644 --- a/arch/arm/cpu/armv7/start.S +++ b/arch/arm/cpu/armv7/start.S @@ -189,7 +189,6 @@ relocate_code: stack_setup: mov sp, r4 -#ifndef CONFIG_SKIP_RELOCATE_UBOOT adr r0, _start ldr r2, _TEXT_BASE ldr r3, _bss_start_ofs @@ -259,7 +258,6 @@ clbss_l:str r2, [r0] /* clear loop... */ cmp r0, r1 bne clbss_l #endif /* #ifndef CONFIG_PRELOADER */ -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ /* * We are done. Do not return, instead branch to second part of board @@ -269,9 +267,7 @@ jump_2_ram: ldr r0, _board_init_r_ofs adr r1, _start add lr, r0, r1 -#ifndef CONFIG_SKIP_RELOCATE_UBOOT add lr, lr, r9 -#endif /* setup parameters for board_init_r */ mov r0, r5 /* gd_t */ mov r1, r7 /* dest_addr */ diff --git a/arch/arm/cpu/ixp/start.S b/arch/arm/cpu/ixp/start.S index 0269207bb2..8d1aebc719 100644 --- a/arch/arm/cpu/ixp/start.S +++ b/arch/arm/cpu/ixp/start.S @@ -320,7 +320,6 @@ stack_setup: cmp r0, r6 beq clear_bss -#ifndef CONFIG_SKIP_RELOCATE_UBOOT copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ stmia r6!, {r9-r10} /* copy to target address [r1] */ @@ -347,7 +346,6 @@ fixloop: cmp r2, r3 blo fixloop #endif -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ clear_bss: #ifndef CONFIG_PRELOADER diff --git a/arch/arm/cpu/lh7a40x/start.S b/arch/arm/cpu/lh7a40x/start.S index 080d29d20b..fd8a40b8aa 100644 --- a/arch/arm/cpu/lh7a40x/start.S +++ b/arch/arm/cpu/lh7a40x/start.S @@ -207,7 +207,6 @@ stack_setup: cmp r0, r6 beq clear_bss -#ifndef CONFIG_SKIP_RELOCATE_UBOOT copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ stmia r6!, {r9-r10} /* copy to target address [r1] */ @@ -234,7 +233,6 @@ fixloop: cmp r2, r3 blo fixloop #endif -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ clear_bss: #ifndef CONFIG_PRELOADER diff --git a/arch/arm/cpu/pxa/start.S b/arch/arm/cpu/pxa/start.S index 03cf4dec36..a136ed83fd 100644 --- a/arch/arm/cpu/pxa/start.S +++ b/arch/arm/cpu/pxa/start.S @@ -251,7 +251,6 @@ stack_setup: cmp r0, r6 beq clear_bss -#ifndef CONFIG_SKIP_RELOCATE_UBOOT stmfd sp!, {r0-r12} copy_loop: ldmia r0!, {r3-r5, r7-r11} /* copy from source address [r0] */ @@ -300,7 +299,6 @@ fixnext: cmp r2, r3 blo fixloop #endif /* #ifndef CONFIG_PRELOADER */ -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ clear_bss: #ifndef CONFIG_PRELOADER @@ -332,9 +330,7 @@ _start_oneboot_ofs ldr r0, _board_init_r_ofs adr r1, _start add lr, r0, r1 -#ifndef CONFIG_SKIP_RELOCATE_UBOOT add lr, lr, r9 -#endif /* setup parameters for board_init_r */ mov r0, r5 /* gd_t */ mov r1, r7 /* dest_addr */ diff --git a/arch/arm/cpu/s3c44b0/start.S b/arch/arm/cpu/s3c44b0/start.S index ca95dea552..67b2c6a695 100644 --- a/arch/arm/cpu/s3c44b0/start.S +++ b/arch/arm/cpu/s3c44b0/start.S @@ -179,7 +179,6 @@ stack_setup: cmp r0, r6 beq clear_bss -#ifndef CONFIG_SKIP_RELOCATE_UBOOT copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ stmia r6!, {r9-r10} /* copy to target address [r1] */ @@ -218,7 +217,6 @@ vector_copy_loop: stmia r1!, {r3-r10} cmp r0, r2 blo vector_copy_loop -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ clear_bss: #ifndef CONFIG_PRELOADER diff --git a/arch/arm/cpu/sa1100/start.S b/arch/arm/cpu/sa1100/start.S index ab6e2f2194..ace0c074df 100644 --- a/arch/arm/cpu/sa1100/start.S +++ b/arch/arm/cpu/sa1100/start.S @@ -183,7 +183,6 @@ stack_setup: cmp r0, r6 beq clear_bss -#ifndef CONFIG_SKIP_RELOCATE_UBOOT copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ stmia r6!, {r9-r10} /* copy to target address [r1] */ @@ -210,7 +209,6 @@ fixloop: cmp r2, r3 blo fixloop #endif -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ clear_bss: #ifndef CONFIG_PRELOADER diff --git a/include/configs/SMN42.h b/include/configs/SMN42.h index 6d8780abb1..4a8acabf72 100644 --- a/include/configs/SMN42.h +++ b/include/configs/SMN42.h @@ -31,7 +31,6 @@ * so we MUST NOT initialize critical regs like mem-timing ... */ #undef CONFIG_SKIP_LOWLEVEL_INIT -#undef CONFIG_SKIP_RELOCATE_UBOOT /* * High Level Configuration Options diff --git a/include/configs/afeb9260.h b/include/configs/afeb9260.h index 9cd0bc645a..36a2a461d1 100644 --- a/include/configs/afeb9260.h +++ b/include/configs/afeb9260.h @@ -42,7 +42,6 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT /* * Hardware drivers diff --git a/include/configs/at91cap9adk.h b/include/configs/at91cap9adk.h index cde5aede90..49c923f163 100644 --- a/include/configs/at91cap9adk.h +++ b/include/configs/at91cap9adk.h @@ -44,7 +44,6 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT /* * Hardware drivers diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h index fb9d0a516d..15de310304 100644 --- a/include/configs/at91rm9200dk.h +++ b/include/configs/at91rm9200dk.h @@ -69,8 +69,6 @@ #define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ #define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */ #define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ -#else -#define CONFIG_SKIP_RELOCATE_UBOOT #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ /* * Size of malloc() pool diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h index 02401b8366..5e7dee5299 100644 --- a/include/configs/at91sam9260ek.h +++ b/include/configs/at91sam9260ek.h @@ -49,7 +49,6 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT /* * Hardware drivers diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h index 05e12dd08c..401478b270 100644 --- a/include/configs/at91sam9261ek.h +++ b/include/configs/at91sam9261ek.h @@ -47,7 +47,6 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT /* * Hardware drivers diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h index 0905638f8b..f6cb40684f 100644 --- a/include/configs/at91sam9263ek.h +++ b/include/configs/at91sam9263ek.h @@ -43,7 +43,6 @@ #ifndef CONFIG_SYS_USE_BOOT_NORFLASH #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT #endif /* diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index 67288d0e48..de74dcf18b 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -47,7 +47,6 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT /* * Hardware drivers diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h index 22054cf488..8dbd0825b5 100644 --- a/include/configs/at91sam9rlek.h +++ b/include/configs/at91sam9rlek.h @@ -44,7 +44,6 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT /* * Hardware drivers diff --git a/include/configs/cmc_pu2.h b/include/configs/cmc_pu2.h index ff4f306fff..a1976350e4 100644 --- a/include/configs/cmc_pu2.h +++ b/include/configs/cmc_pu2.h @@ -68,8 +68,6 @@ #define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ #define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */ #define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ -#else -#define CONFIG_SKIP_RELOCATE_UBOOT #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ /* diff --git a/include/configs/colibri_pxa270.h b/include/configs/colibri_pxa270.h index a5231894db..23bfbeb1d7 100644 --- a/include/configs/colibri_pxa270.h +++ b/include/configs/colibri_pxa270.h @@ -29,7 +29,6 @@ #define CONFIG_VPAC270 1 /* Toradex Colibri PXA270 board */ #undef BOARD_LATE_INIT -#undef CONFIG_SKIP_RELOCATE_UBOOT #undef CONFIG_USE_IRQ #undef CONFIG_SKIP_LOWLEVEL_INIT diff --git a/include/configs/cpuat91.h b/include/configs/cpuat91.h index 5f40908b49..f31081dbf3 100644 --- a/include/configs/cpuat91.h +++ b/include/configs/cpuat91.h @@ -28,7 +28,6 @@ #ifdef CONFIG_CPUAT91_RAM #define CONFIG_SKIP_LOWLEVEL_INIT 1 -#define CONFIG_SKIP_RELOCATE_UBOOT 1 #else #define CONFIG_BOOTDELAY 1 #endif diff --git a/include/configs/csb637.h b/include/configs/csb637.h index f92f3c7443..7a85d65302 100644 --- a/include/configs/csb637.h +++ b/include/configs/csb637.h @@ -69,8 +69,6 @@ #define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ #define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */ #define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ -#else -#define CONFIG_SKIP_RELOCATE_UBOOT #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ /* * Size of malloc() pool diff --git a/include/configs/da830evm.h b/include/configs/da830evm.h index 906b8e76a7..1feada9263 100644 --- a/include/configs/da830evm.h +++ b/include/configs/da830evm.h @@ -41,7 +41,6 @@ #define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) #define CONFIG_SYS_HZ 1000 #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ #define CONFIG_SYS_TEXT_BASE 0xc1080000 /* diff --git a/include/configs/davinci_dm355evm.h b/include/configs/davinci_dm355evm.h index d4c3697e88..8a6905241c 100644 --- a/include/configs/davinci_dm355evm.h +++ b/include/configs/davinci_dm355evm.h @@ -24,7 +24,6 @@ #define DAVINCI_DM355EVM #define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is a 3rd stage loader */ -#define CONFIG_SKIP_RELOCATE_UBOOT #define CONFIG_SYS_NO_FLASH /* that is, no *NOR* flash */ #define CONFIG_SYS_CONSOLE_INFO_QUIET #define CONFIG_DISPLAY_CPUINFO diff --git a/include/configs/davinci_dm355leopard.h b/include/configs/davinci_dm355leopard.h index 4b1f02998c..c9530327c6 100644 --- a/include/configs/davinci_dm355leopard.h +++ b/include/configs/davinci_dm355leopard.h @@ -23,7 +23,6 @@ #define DAVINCI_DM355LEOPARD #define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is a 3rd stage loader */ -#define CONFIG_SKIP_RELOCATE_UBOOT #define CONFIG_SYS_NO_FLASH /* that is, no *NOR* flash */ #define CONFIG_SYS_CONSOLE_INFO_QUIET #define CONFIG_DISPLAY_CPUINFO diff --git a/include/configs/davinci_dm365evm.h b/include/configs/davinci_dm365evm.h index 04b60449ed..b78fe83867 100644 --- a/include/configs/davinci_dm365evm.h +++ b/include/configs/davinci_dm365evm.h @@ -24,7 +24,6 @@ #define DAVINCI_DM365EVM #define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is a 3rd stage loader */ -#define CONFIG_SKIP_RELOCATE_UBOOT #define CONFIG_SYS_NO_FLASH /* that is, no *NOR* flash */ #define CONFIG_SYS_CONSOLE_INFO_QUIET diff --git a/include/configs/davinci_dm6467evm.h b/include/configs/davinci_dm6467evm.h index 6b5d8656b6..f0a8e98c36 100644 --- a/include/configs/davinci_dm6467evm.h +++ b/include/configs/davinci_dm6467evm.h @@ -24,7 +24,6 @@ #define DAVINCI_DM6467EVM #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT /* SoC Configuration */ #define CONFIG_ARM926EJS /* arm926ejs CPU */ diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h index ec05abac49..186726d3a6 100644 --- a/include/configs/davinci_dvevm.h +++ b/include/configs/davinci_dvevm.h @@ -133,7 +133,6 @@ #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ #endif #define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ -#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ #define CONFIG_SYS_NAND_BASE 0x02000000 #define CONFIG_SYS_NAND_USE_FLASH_BBT #define CONFIG_SYS_NAND_HW_ECC @@ -143,10 +142,8 @@ #elif defined(CONFIG_SYS_USE_NOR) #ifdef CONFIG_NOR_UART_BOOT #define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ -#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ #else #undef CONFIG_SKIP_LOWLEVEL_INIT -#undef CONFIG_SKIP_RELOCATE_UBOOT #endif #define CONFIG_ENV_IS_IN_FLASH #undef CONFIG_SYS_NO_FLASH diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h index 409c5a464e..967ebcc98a 100644 --- a/include/configs/davinci_schmoogie.h +++ b/include/configs/davinci_schmoogie.h @@ -88,7 +88,6 @@ #define CONFIG_ENV_SECT_SIZE 2048 /* Env sector Size */ #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ #define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ -#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ #define CONFIG_SYS_NAND_BASE 0x02000000 #define CONFIG_SYS_NAND_HW_ECC #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ diff --git a/include/configs/davinci_sffsdr.h b/include/configs/davinci_sffsdr.h index c7e0e56d7f..4d866d0eb2 100644 --- a/include/configs/davinci_sffsdr.h +++ b/include/configs/davinci_sffsdr.h @@ -83,7 +83,6 @@ #define CONFIG_ENV_SECT_SIZE 2048 /* Env sector Size */ #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ #define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ -#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ #define CONFIG_SYS_NAND_BASE 0x02000000 #define CONFIG_SYS_NAND_HW_ECC #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ diff --git a/include/configs/davinci_sonata.h b/include/configs/davinci_sonata.h index 3035f794d9..0dc89ef41e 100644 --- a/include/configs/davinci_sonata.h +++ b/include/configs/davinci_sonata.h @@ -122,7 +122,6 @@ #define CONFIG_ENV_SECT_SIZE 512 /* Env sector Size */ #define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */ #define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ -#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ #define CONFIG_SYS_NAND_BASE 0x02000000 #define CONFIG_SYS_NAND_HW_ECC #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ @@ -131,10 +130,8 @@ #elif defined(CONFIG_SYS_USE_NOR) #ifdef CONFIG_NOR_UART_BOOT #define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ -#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ #else #undef CONFIG_SKIP_LOWLEVEL_INIT -#undef CONFIG_SKIP_RELOCATE_UBOOT #endif #define CONFIG_ENV_IS_IN_FLASH #undef CONFIG_SYS_NO_FLASH diff --git a/include/configs/dnp1110.h b/include/configs/dnp1110.h index 5c05e4df3c..69c6420fe9 100644 --- a/include/configs/dnp1110.h +++ b/include/configs/dnp1110.h @@ -32,7 +32,6 @@ * so we MUST NOT initialize critical regs like mem-timing ... */ #define CONFIG_SKIP_LOWLEVEL_INIT 1 -#undef CONFIG_SKIP_RELOCATE_UBOOT /* * High Level Configuration Options diff --git a/include/configs/gcplus.h b/include/configs/gcplus.h index 82e70f7b19..fd39ab4a03 100644 --- a/include/configs/gcplus.h +++ b/include/configs/gcplus.h @@ -39,7 +39,6 @@ * we use lowlevel_init (!CONFIG_SKIP_LOWLEVEL_INIT) to remedy that problem. */ #undef CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT 1 /* * High Level Configuration Options diff --git a/include/configs/kb9202.h b/include/configs/kb9202.h index a2edaf9983..cfb7ceacc1 100644 --- a/include/configs/kb9202.h +++ b/include/configs/kb9202.h @@ -53,8 +53,6 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT /* undef this for direct boot from */ - /* NOR flash without preloader */ #define CONFIG_SYS_LONGHELP diff --git a/include/configs/lpc2292sodimm.h b/include/configs/lpc2292sodimm.h index a0fe32ec2c..17972d7e6f 100644 --- a/include/configs/lpc2292sodimm.h +++ b/include/configs/lpc2292sodimm.h @@ -31,7 +31,6 @@ * so we MUST NOT initialize critical regs like mem-timing ... */ #undef CONFIG_SKIP_LOWLEVEL_INIT -#undef CONFIG_SKIP_RELOCATE_UBOOT /* * High Level Configuration Options diff --git a/include/configs/meesc.h b/include/configs/meesc.h index 41a953e905..a27b36b378 100644 --- a/include/configs/meesc.h +++ b/include/configs/meesc.h @@ -48,7 +48,6 @@ #undef CONFIG_USE_IRQ /* don't need IRQ/FIQ stuff */ #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT #define CONFIG_MISC_INIT_R /* Call misc_init_r */ #define CONFIG_ARCH_CPU_INIT diff --git a/include/configs/mp2usb.h b/include/configs/mp2usb.h index 956603a2da..8e398d7205 100644 --- a/include/configs/mp2usb.h +++ b/include/configs/mp2usb.h @@ -73,8 +73,6 @@ #define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ #define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */ #define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ -#else -#define CONFIG_SKIP_RELOCATE_UBOOT #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ /* diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h index 47e7c866c0..3b90a01623 100644 --- a/include/configs/mx31pdk.h +++ b/include/configs/mx31pdk.h @@ -47,7 +47,6 @@ #if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT #endif /* diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h index f31fc4e6c0..b6868b2447 100644 --- a/include/configs/mx51evk.h +++ b/include/configs/mx51evk.h @@ -28,7 +28,6 @@ /* High Level Configuration Options */ #define CONFIG_MX51 /* in a mx51 */ -#define CONFIG_SKIP_RELOCATE_UBOOT #define CONFIG_SYS_MX5_HCLK 24000000 #define CONFIG_SYS_MX5_CLK32 32768 diff --git a/include/configs/netstar.h b/include/configs/netstar.h index ee5a995e5e..f159013934 100644 --- a/include/configs/netstar.h +++ b/include/configs/netstar.h @@ -119,9 +119,6 @@ #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -/*#define CONFIG_SKIP_RELOCATE_UBOOT*/ -/*#define CONFIG_SKIP_LOWLEVEL_INIT */ - /* * Partitions (mtdparts command line support) */ diff --git a/include/configs/otc570.h b/include/configs/otc570.h index af0202cfbe..ca3bf26215 100644 --- a/include/configs/otc570.h +++ b/include/configs/otc570.h @@ -48,7 +48,6 @@ #undef CONFIG_USE_IRQ /* don't need IRQ/FIQ stuff */ #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT #define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ #define CONFIG_ARCH_CPU_INIT diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h index aee842fbb7..7fcc9babdc 100644 --- a/include/configs/pm9261.h +++ b/include/configs/pm9261.h @@ -152,7 +152,6 @@ #define CONFIG_INITRD_TAG 1 #undef CONFIG_SKIP_LOWLEVEL_INIT -#undef CONFIG_SKIP_RELOCATE_UBOOT /* * Hardware drivers diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h index 42ec855cc9..619af2d9bf 100644 --- a/include/configs/pm9263.h +++ b/include/configs/pm9263.h @@ -161,7 +161,6 @@ #define CONFIG_INITRD_TAG 1 #undef CONFIG_SKIP_LOWLEVEL_INIT -#undef CONFIG_SKIP_RELOCATE_UBOOT #define CONFIG_USER_LOWLEVEL_INIT 1 /* diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h index 2fbe5c66a9..3ed6b56bfe 100644 --- a/include/configs/pm9g45.h +++ b/include/configs/pm9g45.h @@ -47,7 +47,6 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT /* * Hardware drivers diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h index 1ff35e3982..c1c7f80d4b 100644 --- a/include/configs/pxa255_idp.h +++ b/include/configs/pxa255_idp.h @@ -42,7 +42,6 @@ * so we MUST NOT initialize critical regs like mem-timing ... */ #undef CONFIG_SKIP_LOWLEVEL_INIT /* define for developing */ -#undef CONFIG_SKIP_RELOCATE_UBOOT /* define for developing */ #define CONFIG_SYS_TEXT_BASE 0x0 /* diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index 47b8a55995..541aec05ff 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -40,8 +40,6 @@ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO -#undef CONFIG_SKIP_RELOCATE_UBOOT - /* input clock of PLL: has 24MHz input clock at S5PC110 */ #define CONFIG_SYS_CLK_FREQ_C110 24000000 diff --git a/include/configs/sbc35_a9g20.h b/include/configs/sbc35_a9g20.h index cdbe7106e4..00f4dc9f7c 100644 --- a/include/configs/sbc35_a9g20.h +++ b/include/configs/sbc35_a9g20.h @@ -54,7 +54,6 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT /* * Hardware drivers diff --git a/include/configs/shannon.h b/include/configs/shannon.h index e02d5e76bb..c0e6643fb4 100644 --- a/include/configs/shannon.h +++ b/include/configs/shannon.h @@ -34,7 +34,6 @@ */ #define CONFIG_INFERNO /* we are using the inferno bootldr */ #define CONFIG_SKIP_LOWLEVEL_INIT 1 -#undef CONFIG_SKIP_RELOCATE_UBOOT /* * High Level Configuration Options diff --git a/include/configs/smdk6400.h b/include/configs/smdk6400.h index f89fc3ef8f..671f2c7c8b 100644 --- a/include/configs/smdk6400.h +++ b/include/configs/smdk6400.h @@ -40,8 +40,6 @@ #define CONFIG_S3C64XX 1 /* in a SAMSUNG S3C64XX Family */ #define CONFIG_SMDK6400 1 /* on a SAMSUNG SMDK6400 Board */ -#define CONFIG_SKIP_RELOCATE_UBOOT - #define CONFIG_PERIPORT_REMAP #define CONFIG_PERIPORT_BASE 0x70000000 #define CONFIG_PERIPORT_SIZE 0x13 diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h index 6bea5b2e27..e36b262a8e 100644 --- a/include/configs/smdkc100.h +++ b/include/configs/smdkc100.h @@ -45,8 +45,6 @@ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO -#undef CONFIG_SKIP_RELOCATE_UBOOT - /* input clock of PLL: SMDKC100 has 12MHz input clock */ #define CONFIG_SYS_CLK_FREQ 12000000 diff --git a/include/configs/tny_a9260.h b/include/configs/tny_a9260.h index 31a0bdf9f0..7b18022c6e 100644 --- a/include/configs/tny_a9260.h +++ b/include/configs/tny_a9260.h @@ -63,7 +63,6 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT /* * Hardware drivers diff --git a/include/configs/vision2.h b/include/configs/vision2.h index 67dca27f73..a5c116b347 100644 --- a/include/configs/vision2.h +++ b/include/configs/vision2.h @@ -195,8 +195,6 @@ GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ CONFIG_SYS_GBL_DATA_OFFSET) -#undef CONFIG_SKIP_RELOCATE_UBOOT - #define CONFIG_BOARD_EARLY_INIT_F /* 166 MHz DDR RAM */ diff --git a/include/configs/zipitz2.h b/include/configs/zipitz2.h index a8b88dae37..615d5c1f75 100644 --- a/include/configs/zipitz2.h +++ b/include/configs/zipitz2.h @@ -30,7 +30,6 @@ #define CONFIG_SYS_TEXT_BASE 0x0 #undef BOARD_LATE_INIT -#undef CONFIG_SKIP_RELOCATE_UBOOT #undef CONFIG_USE_IRQ #undef CONFIG_SKIP_LOWLEVEL_INIT diff --git a/include/configs/zylonite.h b/include/configs/zylonite.h index 4ecef94514..1e03b0180d 100644 --- a/include/configs/zylonite.h +++ b/include/configs/zylonite.h @@ -45,7 +45,6 @@ #undef CONFIG_MMC #define BOARD_LATE_INIT 1 -#undef CONFIG_SKIP_RELOCATE_UBOOT #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ /* we will never enable dcache, because we have to setup MMU first */ |
