diff options
223 files changed, 4610 insertions, 2461 deletions
@@ -1,3 +1,1069 @@ +commit bcab74baa6b1b1c969038ab6f64a186239180405 +Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> +Date: Tue Jul 15 11:23:02 2008 -0400 + + Round the serial port clock divisor value returned by calc_divisor() + + Round the serial port clock divisor value returned by + calc_divisor() + + Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> + Acked-by: Gerald Van Baren <vanbaren@cideas.com> + +commit 0328ef0edfe950f0b7b8b368dae482531506b74a +Author: Robin Getz <rgetz@blackfin.uclinux.org> +Date: Tue Jul 15 21:44:46 2008 +0200 + + Fix DHCP protocol so U-Boot does not respond too early + on the network with it's offered IP number; it should not reply until + after it has received a DHCP ACK message. Also ensures that U-Boot + does it's DHCPREQUEST as broadcast (per RFC 2131). + + Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> + Acked-by: Ben Warren <biggerbadderben@gmail.com> + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 7288f972fcaee14a9741cb08c8688a23874b4a2e +Author: Sebastian Siewior <bigeasy@linutronix.de> +Date: Tue Jul 15 13:35:23 2008 +0200 + + cfi_flash: make the command u32 only + + This got changed by commit 93c56f212c + [cfi_flash: support of long cmd in U-boot.] + + Long is the wrong type because it will behave differently on 64bit + machines in a way that is probably not expected. u32 should be + enough. + + Cc: Alexey Korolev <akorolev@infradead.org> + Cc: Vasiliy Leonenko <vasiliy.leonenko@mail.ru> + Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> + +commit 31cfe57491b183acae575d486729e158f016c27b +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Mon Jul 14 23:48:41 2008 +0200 + + tools/gitignore: update to all generated files + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit 5e0de0e216b8fb27634afb11c60a2fa24c23349e +Author: Andre Schwarz <andre.schwarz@matrix-vision.de> +Date: Wed Jul 9 18:30:44 2008 +0200 + + mpc5xxx: Add MVBC_P board support + + The MVBC_P is a MPC5200B based camera system with Intel Gigabit ethernet + controller (using e1000) and custom Altera Cyclone-II FPGA on PCI. + + Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de> + Signed-off-by: Grant Likely <grant.likely@secretlab.ca> + +commit e2d31fb3450653115452144363d5bde4e5e3e693 +Author: Timur Tabi <timur@freescale.com> +Date: Thu Jun 19 17:56:11 2008 -0500 + + Update Freescale sys_eeprom.c to handle CCID formats + + Update the sys_eeprom.c file to handle both NXID and CCID EEPROM formats. The + NXID format replaces the older CCID format, but it's important to support both + since most boards out there still use the CCID format. This change is in + preparation for using one file to handle both formats. This will also unify + EEPROM support for all Freescale 85xx and 86xx boards. + + Also update the 86xx board header files to use the standard CFG_I2C_EEPROM_ADDR + instead of ID_EEPROM_ADDR. + + Signed-off-by: Timur Tabi <timur@freescale.com> + +commit d85f46a25ccb33ed9b295de3c2cfe1ce270ece9a +Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> +Date: Fri Jul 11 17:22:43 2008 +0900 + + pci: sh: Add pci_skip_dev and pci_print_dev function + + Add function of new PCI, pci_skip_dev and pci_print_dev. + + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit 1107014e835ec9d46c0333f4211d104f77442db0 +Author: Andy Fleming <afleming@freescale.com> +Date: Mon Jul 14 20:29:07 2008 -0500 + + Clean up INIT_RAM options + + The L2_INIT_RAM option was unused, and recent changes to the TLB code + meant that the INIT_RAM TLBs weren't being cleared out. In order to reduce + the amount of mapped space attached to nothing, we change things so the TLBs + get cleared. + + Signed-off-by: Andy Fleming <afleming@freescale.com> + +commit 4524561820a9327e89107854b3a7187800ccf719 +Author: Andy Fleming <afleming@freescale.com> +Date: Mon Jul 14 20:26:57 2008 -0500 + + Remove fake flash bank from 8544 DS + + The fake flash bank was generating errors for anyone who didn't have a + PromJET hooked up to the board. As that constitutes the vast majority of + users, we remove it. + + Signed-off-by: Andy Fleming <afleming@freescale.com> + +commit 630d9bfcb5f6d3a43f251901a6b480994dcb6ea3 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Mon Jul 14 14:07:03 2008 -0500 + + MPC8544DS: Add ATI Video card support + + Add support for using a PCIe ATI Video card on PCIe2. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 7f9f4347cf325c63a39fe30910f3fb211ae2cc15 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Mon Jul 14 14:07:02 2008 -0500 + + 85xx: Add some L1/L2 SPR register definitions + + Add new L1/L2 SPRs related to e500mc cache config and control. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit e5852787f0c3c442a276262f13d91ca450605ac0 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Mon Jul 14 14:07:01 2008 -0500 + + MPC8544DS: Report board id, board version and fpga version. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 73f15a060f67a2462551c334215bd20fac6b81d1 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Mon Jul 14 14:07:00 2008 -0500 + + 85xx: Cleanup L2 cache size detection + + The L2 size detection code was a bit confusing and we kept having to add + code to it to handle new processors. Change the sense of detection so we + look for the older processors that aren't changing. + + Also added support for 1M cache size on 8572. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit c3ca7e5e00a24451f20df3bded9a61ba541921df +Author: Paul Gortmaker <paul.gortmaker@windriver.com> +Date: Fri Jul 11 15:33:08 2008 -0400 + + sbc8560: enable CONFIG_OF_LIBFDT by default + + Make the default build for the sbc8560 board be powerpc + capable with libfdt support. + + Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> + +commit 6b44a44ec2aab180d7095c1c92e669cee1d3e3bd +Author: Andy Fleming <afleming@freescale.com> +Date: Mon Jul 14 20:04:40 2008 -0500 + + Fix indentation for default boot environment variables + + This was proposed by Paul Gortmaker in response to Wolfgang's comments on + similar #defines in sbc8560.h. + + Signed-off-by: Andy Fleming <afleming@freescale.com> + +commit 37fef499104e28e0a83b02b85ca0d1fbe80d294a +Author: Paul Gortmaker <paul.gortmaker@windriver.com> +Date: Fri Jul 11 15:33:07 2008 -0400 + + sbc8560: add default fdt values + + Add in the default fdt settings and the typical EXTRA_ENV + settings as borrowed from the mpc8560ads. Fix a couple + of stale references to the mpc8560ads dating back to the + original clone/fork. + + Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> + Signed-off-by: Andy Fleming <afleming@freescale.com> + +commit d04e76edf92f7f89696989e8702b97e020455af3 +Author: Paul Gortmaker <paul.gortmaker@windriver.com> +Date: Fri Jul 11 15:33:06 2008 -0400 + + sbc8560: add in ft_board_setup() + + Add in for the sbc8560, the ft_board_setup() routine, based on what is + in use for the Freescale MPC8560ADS board. + + Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> + +commit c158bcaca3b31cbe38c4143812e6170e38a57393 +Author: Paul Gortmaker <paul.gortmaker@windriver.com> +Date: Fri Jul 11 15:33:05 2008 -0400 + + sbc8560: define eth0 and eth1 instead of eth1 and eth2 + + The existing config doesn't define CONFIG_HAS_ETH0, and so the + fdt support doesn't update the zeros in the dtb local-mac with + real data from the u-boot env. Since the existing config is + tailored to just two interfaces, get rid of the ETH2 definitions + at the same time. + + Also don't include any end user specific data into the environment + by default -- things like MAC address, network parameters etc. need + to come from the end user. + + Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> + Signed-off-by: Andy Fleming <afleming@freescale.com> + +commit 0ec436d2f95076d9e46ae594db6e9b1d8732840d +Author: Paul Gortmaker <paul.gortmaker@windriver.com> +Date: Fri Jul 11 15:33:04 2008 -0400 + + sbc8560: properly set cs0_bnds for 512MB + + The sbc8560 board ships with 512MB of memory installed, + but the current cs0_bnds is hard coded for 256MB. Set the + value based on CFG_SDRAM_SIZE. + + Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> + +commit 6de5bf24004c8d9c9b070bb8f7418d1c45e5eb27 +Author: Paul Gortmaker <paul.gortmaker@windriver.com> +Date: Fri Jul 11 15:33:03 2008 -0400 + + sbc8560: proper definitions for TSEC. + + The definitions for the TSEC have become out of date. There is no + longer any such options like "CONFIG_MPC85xx_TSEC1" or similar. + Update to match those of other boards, like the MPC8560ADS. + + Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> + Acked-by: Ben Warren <biggerbadderben@gmail.com> + +commit 71074abbe0c76429577aff58aeff0a24ad210b23 +Author: Paul Gortmaker <paul.gortmaker@windriver.com> +Date: Wed Jul 9 13:23:05 2008 -0400 + + 8xxx-fdt: set ns16550 clock from CFG_NS16550_CLK, not bi_busfreq + + Some boards that have external 16550 UARTs don't have a direct + tie between bi_busfreq and the clock used for the UARTs. Boards + that do have such a tie should set CFG_NS16550_CLK to be + get_bus_freq(0) -- which most of them do already. + + Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> + Acked-by: Kim Phillips <kim.phillips@freescale.com> + +commit 24ef76f320fbadf074105229826514db140f939f +Author: Andrew Klossner <andrew@cesa.opbu.xerox.com> +Date: Wed Jul 2 07:03:53 2008 -0700 + + Change the temp map to ROM to align addresses to page size. + + With a page size of BOOKE_PAGESZ_16M, both the real and effective + addresses must be multiples of 16MB. The hardware silently truncates + them so the code happens to work. This patch clarifies the situation + by establishing addresses that the hardware doesn't need to truncate. + + Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com> + Signed-off-by: Andy Fleming <afleming@freescale.com> + +commit 06b4186c10204b6683edb047ac5f506fb0ce0937 +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Tue Jun 17 17:45:22 2008 -0500 + + mpc85xx: use IS_E_PROCESSOR macro + + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 6b70ffb9d1b2e791161f3cf92937aa45b4a07b78 +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Mon Jun 16 15:55:53 2008 -0500 + + fdt: add crypto node handling for MPC8{3, 5}xxE processors + + Delete the crypto node if not on an E-processor. If on 8360 or 834x family, + check rev and up-rev crypto node (to SEC rev. 2.4 property values) + if on an 'EA' processor, e.g. MPC8349EA. + + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 85e5808e8ea9f77da5219f23394112f0b424fa5e +Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> +Date: Fri Jul 11 15:10:11 2008 -0400 + + ARM DaVinci: Remove extern phy_t declaration by moving code to proper place + + ARM DaVinci: Remove extern phy_t declaration by moving + code to proper place. + + Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> + +commit 3a9e7ba2ac14018c5dd1e78a7dd735571569c971 +Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> +Date: Fri Jul 11 15:10:10 2008 -0400 + + ARM DaVinci: Remove duplicate definitions of MACH_TYPE and prototype of i2c_init() + + ARM DaVinci: Remove duplicate definitions of MACH_TYPE + and prototype of i2c_init(). + + Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> + +commit 348753d416cd2c9e7ec6520a544c8f33cf02a560 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Mon Jul 14 14:03:02 2008 -0500 + + Fix some more printf() format problems. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 45b16d22c64674ccd8c4637456a987463609141c +Author: Wolfgang Denk <wd@denx.de> +Date: Mon Jul 14 22:38:42 2008 +0200 + + Fix coding style; make code better parsable by external tools + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit b880cbf207b1c109d3a661417a8feddcbd729a9d +Author: Wolfgang Denk <wd@denx.de> +Date: Mon Jul 14 21:19:08 2008 +0200 + + cpu/i386/serial.c: Fix syntax errors + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit e2d45e6f4d9919e1afeac5e09557b2252832fccf +Author: Wolfgang Denk <wd@denx.de> +Date: Mon Jul 14 20:41:35 2008 +0200 + + elppc board: Coding style cleanup. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 82b24a8a505fc81466484b3c55b574ee0b4205bc +Author: Wolfgang Denk <wd@denx.de> +Date: Mon Jul 14 20:40:22 2008 +0200 + + elppc board: fix syntax error. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 0fe340585a6a48bd392d315b0dd84d068b1c3790 +Author: Wolfgang Denk <wd@denx.de> +Date: Mon Jul 14 20:38:26 2008 +0200 + + EB+MCF-EV123 board: fix coding style (alingment) + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 6841785a0bb0f38175456a923edd634fb7dd6947 +Author: Wolfgang Denk <wd@denx.de> +Date: Mon Jul 14 20:36:44 2008 +0200 + + EB+MCF-EV123 board: fix syntx error + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit ab5cda9f88c3eaf9cf599adc3a3375906c4ed904 +Author: Andy Fleming <afleming@freescale.com> +Date: Mon Jul 7 18:02:08 2008 -0500 + + Remove LBC_CACHE_BASE from 8544 DS + + The 8544 DS doesn't have any cacheable Local Bus memories set up. By mapping + space for some anyway, we were allowing speculative loads into unmapped space, + which would cause an exception (annoying, even if ultimately harmless). + Removing LBC_CACHE_BASE, and using LBC_NONCACHE_BASE for the LBC LAW solves the + problem. + + Signed-off-by: Andy Fleming <afleming@freescale.com> + +commit d0ff51ba5d0309dbe9e25ea54f8a0285a6d5db90 +Author: Wolfgang Denk <wd@denx.de> +Date: Mon Jul 14 15:19:07 2008 +0200 + + Code cleanup: fix old style assignment ambiguities like "=-" etc. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit d7854223c5c85b5849fbf422cc8ac0efef461c37 +Author: Wolfgang Denk <wd@denx.de> +Date: Mon Jul 14 15:10:53 2008 +0200 + + AmigaOneG3SE: remove dead and incomplete files + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit b64f190b7a34224df09b559ca111eb1b733f00ad +Author: Wolfgang Denk <wd@denx.de> +Date: Mon Jul 14 15:06:35 2008 +0200 + + Fix printf() format issues with sizeof_t types by using %zu + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit f354b73e16a86f9e9085471a830605f74f84ea5d +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Mon Jul 14 14:11:45 2008 +0200 + + vsprintf: add z and t options + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit 25dbe98abb686d8210e1731fba85ced7d3ce874c +Author: Wolfgang Denk <wd@denx.de> +Date: Sun Jul 13 23:07:35 2008 +0200 + + Fix some more printf() format issues. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit d5996dd555edf52721b7691a4c59de016251ed39 +Author: Wolfgang Denk <wd@denx.de> +Date: Sun Jul 13 19:51:00 2008 +0200 + + Fix some more printf() format problems. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 0f9d5f6d6e814907794995c6a22af752040c35d9 +Author: Wolfgang Denk <wd@denx.de> +Date: Sun Jul 13 19:48:26 2008 +0200 + + ADS5121: Fix (delete) incorrect ads5121_diu_init() prototype + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 322716a1d1eb33a71067ba0eb1c5346fb2dd6b34 +Author: Anatolij Gustschin <agust@denx.de> +Date: Sat Jul 12 17:31:36 2008 +0200 + + Fix bug in Lime video driver + + We need to wait while drawing engine clears frame + buffer before any further software accesses to frame + buffer will be initiated. Otherwise software drawn + parts could be partially destroyed by the drawing + engine or even GDC chip freeze could occur (as + observed on socrates board). + + Signed-off-by: Anatolij Gustschin <agust@denx.de> + +commit 0a5676befb0c590212a53f7627fa5d0d8a84bf34 +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Sat Jul 12 14:36:34 2008 +0200 + + Fix some more printf() format issues. + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit 18c8a28aad49803780bd8d52432ded528e37e701 +Author: Michal Simek <monstr@monstr.eu> +Date: Fri Jul 11 15:11:57 2008 +0200 + + hwmon: rename CONFIG_DS1722 to CONFIG_DTT_DS1722 + + Signed-off-by: Michal Simek <monstr@monstr.eu> + Acked-by: Stefan Roese <sr@denx.de> + +commit 6ecbb45bb027e90c19d63b48e7b0c05acc1a87c0 +Author: Michal Simek <monstr@monstr.eu> +Date: Fri Jul 11 11:50:53 2008 +0200 + + hwmon: Cleaning hwmon devices + + Clean Makefile + Move device specific values to driver for better reading + + Signed-off-by: Michal Simek <monstr@monstr.eu> + Acked-by: Stefan Roese <sr@denx.de> + +commit c78fce699c7ff467ecd841da6a79f065180bf578 +Author: Michal Simek <monstr@monstr.eu> +Date: Fri Jul 11 10:43:13 2008 +0200 + + FIS: repare incorrect return value with ramdisk handling + + Microblaze and PowerPC use boot_get_ramdisk for loading + ramdisk to memory with checking return value. + Return 0 means success. Return 1 means failed. + Here is correspond part of code from bootm.c which check + return code. + + ret = boot_get_ramdisk (argc, argv, images, IH_ARCH_PPC, + &rd_data_start, &rd_data_end); + if (ret) + goto error; + + Signed-off-by: Michal Simek <monstr@monstr.eu> + +commit 84a2c64a26dc5e275e1cf4e76a6e194a18fb5477 +Author: Michal Simek <monstr@monstr.eu> +Date: Fri Jul 11 10:10:32 2008 +0200 + + microblaze: Remove useless ancient headers + + Signed-off-by: Michal Simek <monstr@monstr.eu> + +commit 53ea981c3124b13c137c2d10e975b7c6672266e0 +Author: Michal Simek <monstr@monstr.eu> +Date: Fri Jul 11 10:10:31 2008 +0200 + + microblaze: Clean uartlite driver + + Redesign uartlite driver to in_be32 and out_be32 macros + Fix missing header in io.h + + Signed-off-by: Michal Simek <monstr@monstr.eu> + Acked-by: Grant Likely <grant.likely@secretlab.ca> + +commit dbf3dfb386a2d5d2381814e39985ab2e21894550 +Author: Marcel Ziswiler <marcel@ziswiler.com> +Date: Fri Jul 11 02:39:14 2008 +0200 + + Enable passing of ATAGs required by latest Linux kernel. + +commit ef130d3093bdf88f01cf3e000fe5df249ebf2b1a +Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> +Date: Fri Jul 11 10:24:15 2008 -0400 + + Fix integer overflow warning in calc_divisor() + + which happened when rounding the serial port clock divisor + + Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> + +commit 6b760189d77f001684e3160b355c185ca3804961 +Author: Marcel Ziswiler <marcel@ziswiler.com> +Date: Fri Jul 11 01:09:59 2008 +0200 + + Fix build time warnings in function mmc_decode_csd() + + Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> + +commit c15947d6ce0d59925c97fdfac692476af6e262d0 +Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> +Date: Thu Jul 10 10:46:33 2008 -0400 + + ARM: Fix for broken compilation when defining CONFIG_CMD_ELF + + caused by missing dcache status/enable/disable functions. + + Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> + +commit 068c1b77c8f42a1a31084d2f4b1d5cc807c1a9ce +Author: Stefan Roese <sr@denx.de> +Date: Thu Jul 10 13:53:31 2008 +0200 + + ppc4xx: Remove redundant ft_board_setup() functions from some 4xx boards + + This patch removes some ft_board_setup() functions from some 4xx boards. + This can be done since we now have a default weak implementation for this + in cpu/ppc4xx/fdt.c. Only board in need for a different/custom + implementation like canyonlands need their own version. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit d39a089f8bc960ba9ae6a08fda5582b578620cc1 +Author: Wolfgang Denk <wd@denx.de> +Date: Sun Jul 13 14:58:16 2008 +0200 + + Add last known maintainer for orphaned boards; reformat. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 5c761d57bb9940e016d561fda8b2ed84c55de5b6 +Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> +Date: Thu Jul 10 13:16:04 2008 +0200 + + Remove kharris@nexus-tech.net from MAINTAINERS + + Mail to kharris@nexus-tech.net bounces because the user doesn't exist + anymore. You can't be a maintainer without a valid e-mail address, so + move all boards that used to be maintained by Kyle Harris to the + "orphaned" list. + + Currently, only PowerPC has a list of orphaned boards, so this patch + creates one for ARM as well. + + Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> + +commit 17bd17071463b0cde391ac4a0863d600474b4ea1 +Author: Anatolij Gustschin <agust@denx.de> +Date: Thu Jul 10 01:15:10 2008 +0200 + + at91: Fix to enable using Teridian MII phy (78Q21x3) with at91sam9260 + + On the at91sam9260ep development board there is an EEPROM + connected to the TWI interface (PA23, PA24 Peripheral A + multiplexing), so we cannot use these pins as ETX2, ETX3. + This patch configures PA10, PA11 pins for ETX2, ETX3 + instead of PA23, PA24 pins. + + Signed-off-by: Anatolij Gustschin <agust@denx.de> + Signed-off-by: Manuel Sahm <Manuel.Sahm@feig.de> + +commit f889265753ddf4465d9d580827bb9289bfac55d6 +Author: Kenneth Johansson <kenneth@southpole.se> +Date: Sat Jul 12 13:18:34 2008 -0600 + + fix DIU for small screens + + The DIU_DIV register is 8 bit not 5 bit. This prevented large DIV values + so it was not possible to set a slow pixel clock and thus prevented + display on small screens. + + Signed-off-by: Kenneth Johansson <kenneth@southpole.se> + Acked-by: John Rigby <jrigby@freescale.com> + +commit b60b8573875e650e4c69be667bfc88d3ed474a7c +Author: John Rigby <jrigby@freescale.com> +Date: Fri Jul 11 14:44:09 2008 -0600 + + ADS5121 cleanup compile warnings + + board/ads5121/iopin.c + Replace bit fields in struct iopin_t with a single + field and intialize it via plain old macros. + This fixes the type pun warnings and makes the code + more readable. + + board/ads5121/ads5121.c + Add include iopin.h to ads5121.c for the iopin_initialize + prototype. + + Add an extern void ads5121_diu_init(void) + + Signed-off-by: John Rigby <jrigby@freescale.com> + +commit bde63587622c4b830a27d1ddf7265843de9e994f +Author: Wolfgang Denk <wd@denx.de> +Date: Fri Jul 11 22:56:11 2008 +0200 + + Fix some more printf() format issues. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 184f1b404a90eef8b425c0e7b3018d59ef9982c8 +Author: Wolfgang Denk <wd@denx.de> +Date: Fri Jul 11 22:55:31 2008 +0200 + + Fixed some out-of-tree build issues + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 47bf9c71ae838305a3ea3161af8d14e6f3fc2c82 +Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> +Date: Wed Jul 9 16:20:23 2008 -0500 + + ColdFire: Fix FB CS not setup properly for Mcf5282 + + Remove all CFG_CSn_RO in cpu/mcf52x2/cpu_init.c. If + CFG_CSn_RO is defined as 0, the chipselect will not + be assigned. + + Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> + +commit bc3ccb139f0836f0a834cfd370a120a00ad7e63a +Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> +Date: Wed Jul 9 15:47:27 2008 -0500 + + ColdFire: Fix incorrect define for mcf5227x and mcf5445x RTC + + Rename CONFIG_MCFTMR to CONFIG_MCFRTC to include real time + clock module in cpu/<cf arch>/cpu_init.c + + Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> + +commit f94945b517f10e01927101679c62361e03d4e837 +Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> +Date: Wed Jul 9 15:25:01 2008 -0500 + + ColdFire: Fix incorrect board name in MAKEALL for M5253EVBE + + Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> + +commit 0e0c4357d14a3563c6a2a1e6d5ad6a2cc4f35cab +Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> +Date: Wed Jul 9 15:21:44 2008 -0500 + + Fix compile error caused by missing timer function + + Add #define CONFIG_MCFTMR in EB+MCF-EV123.h configuration file + + Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> + +commit c37ea031175b807c54e6bad9b270e9bede6c0078 +Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> +Date: Wed Jul 9 15:14:25 2008 -0500 + + Fix compile error caused by incorrect function return type + + Rename int mii_init(void) to void mii_init(void) + + Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> + +commit ab4860b255239dbaecccdd002c8d11f4ef54dd75 +Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> +Date: Wed Jun 18 19:27:23 2008 -0500 + + ColdFire: Fix power up issue for MCF5235 + + Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> + +commit dd08e97361fbc9e79fa5ef1a8acf29273b934b11 +Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> +Date: Wed Jun 18 19:19:07 2008 -0500 + + ColdFire: Fix compiling error for MCF5275 + + The compiling error was caused by missing a closed parentheses + in speed.c + + Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> + +commit 94603c2fd4dbe0655878416aa0da9f302d4c30d3 +Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> +Date: Wed Jun 18 19:14:01 2008 -0500 + + ColdFire: Fix timer issue for MCF5272 + + The timer was assigned to wrong timer memory mapped which + caused udelay() and timer() not working properly. + + Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> + +commit 3b1e8ac9b43f89cc9291a6a86e6b33ef55801515 +Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> +Date: Wed Jun 18 19:12:13 2008 -0500 + + ColdFire: Change invalid JMP to BRA caught by new v4e toolchain + + Signed-off-by: Kurt Mahan <kmahan@freescale.com> + +commit 8371dc2066136be21e10b7b9293e469297d77298 +Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> +Date: Wed Jun 18 19:05:23 2008 -0500 + + ColdFire: Add -got=single param for new linux v4e toolchains + + Signed-off-by: Kurt Mahan <kmahan@freescale.com> + +commit 56d52615cd47bc522ee13bb7ec7e59d6ce9426c7 +Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> +Date: Wed Jun 18 13:21:19 2008 -0500 + + ColdFire: Fix code flash configuration for M547x/M548x boards + + Signed-off-by: Kurt Mahan <kmahan@freescale.com> + +commit 6e37091afc07fdcc15590093fd066b0cb7399f85 +Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> +Date: Tue Jun 24 12:12:16 2008 -0500 + + ColdFire: Fix warning messages by passing correct data type in board.c + + Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> + +commit 81cc32322acb1b3225ee45606ced48e2a14824dc +Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> +Date: Thu May 29 12:21:54 2008 -0500 + + ColdFire: Fix UART baudrate formula + + The formula "counter = (u32) (gd->bus_clk / gd->baudrate) / 32" + can generate the wrong divisor due to integer division truncation. + Round the calculated divisor value by adding 1/2 the baudrate + before dividing by the baudrate. + + Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> + Acked-by: Gerald Van Baren <vanbaren@cideas.com> + +commit b578fb471444cbd7db1285701ba51343baaf73fb +Author: Stefan Roese <sr@denx.de> +Date: Thu Jul 10 11:38:26 2008 +0200 + + ppc4xx: Fix include sequence in 4xx_pcie.c + + This patch now moves common.h to the top of the inlcude list. This + is needed for boards with CONFIG_PHYS_64BIT set (e.g. katmai), so that + the phys_size_t/phys_addr_t are defined to the correct size in this + driver. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 9b55a2536919f4de1bb1044e6eb8262c2f53bc96 +Author: Wolfgang Denk <wd@denx.de> +Date: Fri Jul 11 01:16:00 2008 +0200 + + Fix some more print() format errors. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit fdd70d1921b87287d9a99d1be99bc35226c2b412 +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Thu Jul 10 20:57:54 2008 +0200 + + MAKEALL: remove duplicated at91 from ARM9 list and add LIST_at91 to arm + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit c6457e3b8bc79a97381cf7deffa08f7c5a24f86c +Author: Sergey Lapin <slapin@ossfans.org> +Date: Thu Jun 5 11:06:29 2008 +0400 + + DataFlash AT45DB021 support + + Some boards based on AT91SAM926X-EK use smaller DF chips to keep + bootstrap, u-boot and its environment, using NAND or other external + storage for kernel and rootfs. This patch adds support for + small 1024x263 chip. + + Signed-off-by: Sergey Lapin <slapin@ossfans.org> + +commit 4109df6f75fc00ab7da56d286ba50149a0d16a69 +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Thu Jul 10 14:00:15 2008 -0500 + + silence misc printf formatting compiler warnings + + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 3d71c81a9bb03f866a1e98da96363ef3f46c76b3 +Author: Markus KlotzbĂĽcher <mk@denx.de> +Date: Thu Jul 10 14:47:09 2008 +0200 + + USB: shutdown USB before booting + + This patch fixes a potentially serious issue related to USB which was + discouvered by Martin Krause <martin.krause@tqs.de> and fixed for + ARM920T. Martin wrote: + + Turn off USB to prevent the host controller from writing to the + SDRAM while Linux is booting. This could happen, because the HCCA + (Host Controller Communication Area) lies within the SDRAM and the + host controller writes continously to this area (as busmaster!), for + example to increase the HccaFrameNumber variable, which happens + every 1 ms. + + This is a slightly modified version of the patch in order to shutdown + USB when booting on all architectures. + + Signed-off-by: Markus Klotzbuecher <mk@denx.de> + +commit f31c49db2a5e076f415c0785eb37f67f2faa5fc8 +Author: Martha Marx <mmarx@silicontkx.com> +Date: Thu May 29 14:23:25 2008 -0400 + + Configuration changes for ADS5121 Rev 3 + + ADS5121 Rev 3 board is now the default config + + config targets are now + + ads5121_config + Rev 3 board with + PCI + M41T62 on board RTC + 512MB DRAM + + ads5121_rev2_config + Rev 2 board with + No PCI + 256MB DRAM + + Signed-off-by: Martha Marx <mmarx@silicontkx.com> + Acked-by: Grant Likely <grant.likely@secretlab.ca> + Acked-by: John Rigby <jrigby@freescale.com> + +commit 16bee7b0dc294ee01ca2434aa1dd3bd717a69615 +Author: Martha Marx <mmarx@silicontkx.com> +Date: Thu May 29 15:37:21 2008 -0400 + + Consolidate ADS5121 IO Pin configuration + + Consolidate ADS5121 IO Pin configuration to one file + board/ads5121/iopin.c. + + Remove pin config from cpu/mpc512x/fec.c + + Signed-off-by: Martha Marx <mmarx@silicontkx.com> + Acked-by: Grant Likely <grant.likely@secretlab.ca> + Acked-by: John Rigby <jrigby@freescale.com> + +commit d4692b0ba83b7b454bbd92bad1f4befe6e1657b7 +Author: Christian Eggers <christian@p2400.wgnetz.xx> +Date: Fri Jun 27 19:46:51 2008 +0200 + + Fix "usb part" command + + Only print partition for selected device if user supplied the <dev> + arg with the "usb part [dev]" command. + + Signed-off-by: Christian Eggers <ceggers@gmx.de> + Acked-by: Markus Klotzbuecher <mk@denx.de> + +commit cc83b27217f7380041fea386ddb6d6d9b261617d +Author: Harald Welte <laforge@gnumonks.org> +Date: Mon Jul 7 00:58:05 2008 +0800 + + fix USB devices with multiple configurations + + This patch fixes bugs in usbdcore*.c related to the use of devices + with multiple configurations. + + The original code made mistakes about the meaning of configuration value and + configuration index, and the resulting off-by-one errors resulted in: + + * SET_CONFIGURATION always selected the first configuration, no matter what + wValue is being passed. + * GET_DESCRIPTOR/CONFIGURATION always returned the descriptor for the first + configuration (index 0). + + Signed-off-by: Harald Welte <laforge@openmoko.org> + Acked-by: Markus Klotzbuecher <mk@denx.de> + +commit 06c53beae1a726e707971c555613f09b270a2461 +Author: Wolfgang Denk <wd@denx.de> +Date: Thu Jul 10 13:16:09 2008 +0200 + + Fix some more print() format errors. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit d4b5f3fa001228d76e2c3380cedadf804b802c2a +Author: Christian Eggers <christian@p2400.wgnetz.xx> +Date: Fri Jun 27 19:46:51 2008 +0200 + + Fix "usb part" command + + Only print partition for selected device if user supplied the <dev> + arg with the "usb part [dev]" command. + + Signed-off-by: Christian Eggers <ceggers@gmx.de> + Acked-by: Markus Klotzbuecher <mk@denx.de> + +commit e73b5212e0463a3db0af0a5c95c75bfb762ca973 +Author: Harald Welte <laforge@gnumonks.org> +Date: Mon Jul 7 00:58:05 2008 +0800 + + fix USB devices with multiple configurations + + This patch fixes bugs in usbdcore*.c related to the use of devices + with multiple configurations. + + The original code made mistakes about the meaning of configuration value and + configuration index, and the resulting off-by-one errors resulted in: + + * SET_CONFIGURATION always selected the first configuration, no matter what + wValue is being passed. + * GET_DESCRIPTOR/CONFIGURATION always returned the descriptor for the first + configuration (index 0). + + Signed-off-by: Harald Welte <laforge@openmoko.org> + Acked-by: Markus Klotzbuecher <mk@denx.de> + +commit e870690bdca154943ecadd5212d2d59c1b9d391b +Author: Stefan Roese <sr@denx.de> +Date: Thu Jul 10 10:10:54 2008 +0200 + + MTD/NAND: Fix printf format warning in nand code + + This patch fixes NAND related printf format warning. Those warnings are + now visible since patch dc4b0b38d4aadf08826f6c31270f1eecd27964fd + [Fix printf errors.] by Andrew Klossner has been applied. Thanks, this is + really helpful. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 10943c9afa25694bd9999461f4e9e50ce22fff2b +Author: Stefan Roese <sr@denx.de> +Date: Thu Jul 10 10:00:45 2008 +0200 + + rtc: Fix printf format warning in m41t60.c + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit dc1da42f814cd71e6756c2cf62af1ada1d0581fb +Author: Stefan Roese <sr@denx.de> +Date: Tue Jul 8 12:01:47 2008 +0200 + + pci: Move PCI device configuration check into a separate weak function + + This patch moves the check, if a device should be skipped in PCI PNP + configuration into the function pci_skip_dev(). This function is defined + as weak so that it can be overwritten by a platform specific one if + needed. The check if the device should get printed in the PCI summary upon + bootup (when CONFIG_PCI_SCAN_SHOW is defined) is moved to the function + pci_print_dev() which is also defined as weak too. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit b002144e1dc21374b1ef5281fe6b5d014af96650 +Author: Stefan Roese <sr@denx.de> +Date: Thu Jul 10 09:58:06 2008 +0200 + + ppc4xx: Fix printf format warnings now visible with the updated format check + + This patch fixes ppc4xx related printf format warning. Those warnings are + now visible since patch dc4b0b38d4aadf08826f6c31270f1eecd27964fd + [Fix printf errors.] by Andrew Klossner has been applied. Thanks, this is + really helpful. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 5d812b8b4ad9667c77a5bf92b4ba81699abc9fc3 +Author: Stefan Roese <sr@denx.de> +Date: Wed Jul 9 17:33:57 2008 +0200 + + ppc4xx: Enable support for > 2GB SDRAM on AMCC Katmai + + Newer PPC's like 440SPe, 460EX/GT can be equipped with more than 2GB of SDRAM. + To support such configurations, we "only" map the first 2GB via the TLB's. We + need some free virtual address space for the remaining peripherals like, SoC + devices, FLASH etc. + + Note that ECC is currently not supported on configurations with more than 2GB + SDRAM. This is because we only map the first 2GB on such systems, and therefore + the ECC parity byte of the remaining area can't be written. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit cf1c2ed91df26903b956948f37f82de9e1158a89 +Author: Larry Johnson <lrj@acm.org> +Date: Sat Jun 14 17:02:49 2008 -0400 + + ppc4xx: Remove implementation of testdram() from Korat board support + + Signed-off-by: Larry Johnson <lrj@acm.org> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 47ce4a28ccfcfb803aa68d3d4505a8de056a8a5e +Author: Larry Johnson <lrj@acm.org> +Date: Sat Jun 14 16:53:02 2008 -0400 + + ppc4xx: Update and add FDT to Korat board support + + Signed-off-by: Larry Johnson <lrj@acm.org> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 4188f0491886b3b486164e819c0a83fdb97efd7d +Author: Wolfgang Denk <wd@denx.de> +Date: Thu Jul 10 01:13:30 2008 +0200 + + Minor coding style cleanup; update CHANGELOG + + Signed-off-by: Wolfgang Denk <wd@denx.de> + commit 8915f1189c1d29d8be7f4de325702d90a8988219 Author: Paul Gortmaker <paul.gortmaker@windriver.com> Date: Wed Jul 9 17:50:45 2008 -0400 @@ -285,6 +1351,19 @@ Date: Tue Jul 8 12:03:24 2008 +0900 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> +commit 3473ab737282b08ad61841fcbb14c4d264a93a8e +Author: Jason Jin <Jason.jin@freescale.com> +Date: Tue May 13 11:50:36 2008 +0800 + + Feed the watchdog in u-boot for 8610 board. + + The watchdog on 8610 board is enabled by setting sw[6] + to on. Once enabled, the watchdog can not be disabled + by software. So feed the dog in u-boot is necessary for + normal operation. + + Signed-off-by: Jason Jin <Jason.jin@freescale.com> + commit 63676841ca2d603b13765f3f7b72ff1a61c23f90 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> Date: Wed Jun 18 12:10:33 2008 -0400 @@ -748,6 +1827,18 @@ Date: Sun Jun 8 17:59:53 2008 +0200 Signed-off-by: Juergen Kilb <J.Kilb@gmx.de> Acked-by: Felix Radensky <felix@embedded-sol.com> +commit dd1c5523d6f44e842e69f2fcb50788c6060eab86 +Author: Stefan Roese <sr@denx.de> +Date: Tue Jul 1 17:03:19 2008 +0200 + + ppc4xx: Fix 460EX/GT PCIe port initialization + + This patch fixes a bug where the 460EX/GT PCIe UTLSET1 register was + configured incorrectly. Thanks to Olga Buchonina from AMCC for pointing + this out. + + Signed-off-by: Stefan Roese <sr@denx.de> + commit b571afde0295b007a45055ee49f8822c753a5651 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Date: Sat Jun 7 12:29:52 2008 +0200 @@ -1129,6 +2220,22 @@ Date: Thu Jun 12 12:40:11 2008 +0200 Acked-by: Stefan Roese <sr@denx.de> Acked-by: Kumar Gala <galak@kernel.crashing.org> +commit a036b0443657fe0f4773786de9092251869f08ac +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Thu Jun 19 01:45:50 2008 -0500 + + MPC8610HPCD: Report board id, board version and fpga version. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 7de8c21f14df9c20fdcf6027aec8e8545f75f835 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Thu Jun 19 01:45:27 2008 -0500 + + MPC8641HPCN: Report board id, board version and fpga version. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + commit fb8c061ea05fc68d37e2a8b9f8c949d76c8d71a8 Author: Stefan Roese <sr@denx.de> Date: Mon Jun 16 10:40:02 2008 +0200 @@ -426,7 +426,7 @@ D: FADS823 configuration, MPC823 video support, I2C, wireless keyboard, lots mor N: Andre Schwarz E: andre.schwarz@matrix-vision.de -D: Support for Matrix Vision boards (MVBLM7) +D: Support for Matrix Vision boards (MVBLM7/MVBC_P) N: Robert Schwebel E: r.schwebel@pengutronix.de diff --git a/MAINTAINERS b/MAINTAINERS index a3d70b1d31..cbe5c47f53 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -14,261 +14,260 @@ # PowerPC Systems: # # # # Maintainer Name, Email Address # -# Board CPU # +# Board CPU # ######################################################################### Greg Allen <gallen@arlut.utexas.edu> - UTX8245 MPC8245 + UTX8245 MPC8245 Pantelis Antoniou <panto@intracom.gr> - NETVIA MPC8xx + NETVIA MPC8xx Reinhard Arlt <reinhard.arlt@esd-electronics.com> - cpci5200 MPC5200 - mecp5200 MPC5200 - pf5200 MPC5200 + cpci5200 MPC5200 + mecp5200 MPC5200 + pf5200 MPC5200 - CPCI750 PPC750FX/GX + CPCI750 PPC750FX/GX Yuli Barcohen <yuli@arabellasw.com> - Adder MPC87x/MPC852T - ep8248 MPC8248 - ISPAN MPC8260 - MPC8260ADS MPC826x/MPC827x/MPC8280 - Rattler MPC8248 - ZPC1900 MPC8265 + Adder MPC87x/MPC852T + ep8248 MPC8248 + ISPAN MPC8260 + MPC8260ADS MPC826x/MPC827x/MPC8280 + Rattler MPC8248 + ZPC1900 MPC8265 Michael Barkowski <michael.barkowski@freescale.com> - MPC8323ERDB MPC8323 + MPC8323ERDB MPC8323 Jerry Van Baren <gerald.vanbaren@smiths-aerospace.com> - sacsng MPC8260 + sacsng MPC8260 Oliver Brown <obrown@adventnetworks.com> - gw8260 MPC8260 + gw8260 MPC8260 Conn Clark <clark@esteem.com> - ESTEEM192E MPC8xx + ESTEEM192E MPC8xx Joe D'Abbraccio <ljd015@freescale.com> - MPC837xERDB MPC837x + MPC837xERDB MPC837x Kári Davíđsson <kd@flaga.is> - FLAGADM MPC823 + FLAGADM MPC823 Torsten Demke <torsten.demke@fci.com> - eXalion MPC824x + eXalion MPC824x Wolfgang Denk <wd@denx.de> - IceCube_5100 MGT5100 - IceCube_5200 MPC5200 - - AMX860 MPC860 - ETX094 MPC850 - FPS850L MPC850 - FPS860L MPC860 - ICU862 MPC862 - IP860 MPC860 - IVML24 MPC860 - IVML24_128 MPC860 - IVML24_256 MPC860 - IVMS8 MPC860 - IVMS8_128 MPC860 - IVMS8_256 MPC860 - LANTEC MPC850 - LWMON MPC823 - NC650 MPC852 - R360MPI MPC823 - RMU MPC850 - RRvision MPC823 - SM850 MPC850 - SPD823TS MPC823 - TQM823L MPC823 - TQM823L_LCD MPC823 - TQM850L MPC850 - TQM855L MPC855 - TQM860L MPC860 - TQM860L_FEC MPC860 - c2mon MPC855 - hermes MPC860 - lwmon MPC823 - pcu_e MPC855 - - CU824 MPC8240 - Sandpoint8240 MPC8240 - SL8245 MPC8245 - - ATC MPC8250 - PM825 MPC8250 - - TQM8255 MPC8255 - - CPU86 MPC8260 - PM826 MPC8260 - TQM8260 MPC8260 - - P3G4 MPC7410 - - PCIPPC2 MPC750 - PCIPPC6 MPC750 - - EXBITGEN PPC405GP + IceCube_5100 MGT5100 + IceCube_5200 MPC5200 + + AMX860 MPC860 + ETX094 MPC850 + FPS850L MPC850 + FPS860L MPC860 + ICU862 MPC862 + IP860 MPC860 + IVML24 MPC860 + IVML24_128 MPC860 + IVML24_256 MPC860 + IVMS8 MPC860 + IVMS8_128 MPC860 + IVMS8_256 MPC860 + LANTEC MPC850 + LWMON MPC823 + NC650 MPC852 + R360MPI MPC823 + RMU MPC850 + RRvision MPC823 + SM850 MPC850 + SPD823TS MPC823 + TQM823L MPC823 + TQM823L_LCD MPC823 + TQM850L MPC850 + TQM855L MPC855 + TQM860L MPC860 + TQM860L_FEC MPC860 + c2mon MPC855 + hermes MPC860 + lwmon MPC823 + pcu_e MPC855 + + CU824 MPC8240 + Sandpoint8240 MPC8240 + SL8245 MPC8245 + + ATC MPC8250 + PM825 MPC8250 + + TQM8255 MPC8255 + + CPU86 MPC8260 + PM826 MPC8260 + TQM8260 MPC8260 + + P3G4 MPC7410 + + PCIPPC2 MPC750 + PCIPPC6 MPC750 + + EXBITGEN PPC405GP Jon Diekema <jon.diekema@smiths-aerospace.com> - sbc8260 MPC8260 + sbc8260 MPC8260 Dave Ellis <DGE@sixnetio.com> - SXNI855T MPC8xx + SXNI855T MPC8xx Thomas Frieden <ThomasF@hyperion-entertainment.com> - AmigaOneG3SE MPC7xx + AmigaOneG3SE MPC7xx Matthias Fuchs <matthias.fuchs@esd-electronics.com> - ADCIOP IOP480 (PPC401) - APC405 PPC405GP - AR405 PPC405GP - ASH405 PPC405EP - CANBT PPC405CR - CPCI2DP PPC405GP - CPCI405 PPC405GP - CPCI4052 PPC405GP - CPCI405AB PPC405GP - CPCI405DT PPC405GP - CPCIISER4 PPC405GP - DASA_SIM IOP480 (PPC401) - DP405 PPC405EP - DU405 PPC405GP - DU440 PPC440EPx - G2000 PPC405EP - HH405 PPC405EP - HUB405 PPC405EP - OCRTC PPC405GP - ORSG PPC405GP - PCI405 PPC405GP - PLU405 PPC405EP - PMC405 PPC405GP - PMC440 PPC440EPx - VOH405 PPC405EP - VOM405 PPC405EP - WUH405 PPC405EP - CMS700 PPC405EP + ADCIOP IOP480 (PPC401) + APC405 PPC405GP + AR405 PPC405GP + ASH405 PPC405EP + CANBT PPC405CR + CPCI2DP PPC405GP + CPCI405 PPC405GP + CPCI4052 PPC405GP + CPCI405AB PPC405GP + CPCI405DT PPC405GP + CPCIISER4 PPC405GP + DASA_SIM IOP480 (PPC401) + DP405 PPC405EP + DU405 PPC405GP + DU440 PPC440EPx + G2000 PPC405EP + HH405 PPC405EP + HUB405 PPC405EP + OCRTC PPC405GP + ORSG PPC405GP + PCI405 PPC405GP + PLU405 PPC405EP + PMC405 PPC405GP + PMC440 PPC440EPx + VOH405 PPC405EP + VOM405 PPC405EP + WUH405 PPC405EP + CMS700 PPC405EP Niklaus Giger <niklaus.giger@netstal.com> - HCU4 PPC405GPr - MCU25 PPC405GPr - HCU5 PPC440EPx + HCU4 PPC405GPr + MCU25 PPC405GPr + HCU5 PPC440EPx Frank Gottschling <fgottschling@eltec.de> - MHPC MPC8xx + MHPC MPC8xx - BAB7xx MPC740/MPC750 + BAB7xx MPC740/MPC750 Wolfgang Grandegger <wg@denx.de> - CCM MPC855 + CCM MPC855 - PN62 MPC8240 - - IPHASE4539 MPC8260 - SCM MPC8260 + PN62 MPC8240 + IPHASE4539 MPC8260 + SCM MPC8260 Howard Gray <mvsensor@matrix-vision.de> - MVS1 MPC823 + MVS1 MPC823 Joe Hamman <joe.hamman@embeddedspecialties.com> - sbc8548 MPC8548 - sbc8641d MPC8641D + sbc8548 MPC8548 + sbc8641d MPC8641D Klaus Heydeck <heydeck@kieback-peter.de> - KUP4K MPC855 - KUP4X MPC859 + KUP4K MPC855 + KUP4X MPC859 Gary Jennejohn <garyj@denx.de> - quad100hd PPC405EP + quad100hd PPC405EP Murray Jensen <Murray.Jensen@csiro.au> - cogent_mpc8xx MPC8xx + cogent_mpc8xx MPC8xx - cogent_mpc8260 MPC8260 - hymod MPC8260 + cogent_mpc8260 MPC8260 + hymod MPC8260 Larry Johnson <lrj@acm.org> - korat PPC440EPx + korat PPC440EPx Brad Kemp <Brad.Kemp@seranoa.com> - ppmc8260 MPC8260 + ppmc8260 MPC8260 Sangmoon Kim <dogoil@etinsys.com> - debris MPC8245 - KVME080 MPC8245 + debris MPC8245 + KVME080 MPC8245 Thomas Lange <thomas@corelatus.se> - GTH MPC860 + GTH MPC860 Robert Lazarski <robertlazarski@gmail.com> - ATUM8548 MPC8548 + ATUM8548 MPC8548 The LEOX team <team@leox.org> - ELPT860 MPC860T + ELPT860 MPC860T Dave Liu <daveliu@freescale.com> - MPC8315ERDB MPC8315 - MPC832XEMDS MPC832x - MPC8360EMDS MPC8360 - MPC837XEMDS MPC837x + MPC8315ERDB MPC8315 + MPC832XEMDS MPC832x + MPC8360EMDS MPC8360 + MPC837XEMDS MPC837x Nye Liu <nyet@zumanetworks.com> - ZUMA MPC7xx_74xx + ZUMA MPC7xx_74xx Jon Loeliger <jdl@freescale.com> - MPC8540ADS MPC8540 - MPC8560ADS MPC8560 - MPC8541CDS MPC8541 - MPC8555CDS MPC8555 + MPC8540ADS MPC8540 + MPC8560ADS MPC8560 + MPC8541CDS MPC8541 + MPC8555CDS MPC8555 - MPC8641HPCN MPC8641D + MPC8641HPCN MPC8641D Dan Malek <dan@embeddedalley.com> - stxgp3 MPC85xx - stxssa MPC85xx - stxxtc MPC8xx + stxgp3 MPC85xx + stxssa MPC85xx + stxxtc MPC8xx Eran Man <eran@nbase.co.il> - EVB64260_750CX MPC750CX + EVB64260_750CX MPC750CX Andrea "llandre" Marson <andrea.marson@dave-tech.it> @@ -276,75 +275,75 @@ Andrea "llandre" Marson <andrea.marson@dave-tech.it> Reinhard Meyer <r.meyer@emk-elektronik.de> - TOP860 MPC860T - TOP5200 MPC5200 + TOP860 MPC860T + TOP5200 MPC5200 Tolunay Orkun <torkun@nextio.com> - csb272 PPC405GP - csb472 PPC405GP + csb272 PPC405GP + csb472 PPC405GP John Otken <jotken@softadvances.com> - luan PPC440SP - taihu PPC405EP + luan PPC440SP + taihu PPC405EP Keith Outwater <Keith_Outwater@mvis.com> - GEN860T MPC860T - GEN860T_SC MPC860T + GEN860T MPC860T + GEN860T_SC MPC860T Frank Panno <fpanno@delphintech.com> - ep8260 MPC8260 + ep8260 MPC8260 Denis Peter <d.peter@mpl.ch> - MIP405 PPC4xx - PIP405 PPC4xx + MIP405 PPC4xx + PIP405 PPC4xx Kim Phillips <kim.phillips@freescale.com> - MPC8349EMDS MPC8349 + MPC8349EMDS MPC8349 Daniel Poirot <dan.poirot@windriver.com> - sbc8240 MPC8240 - sbc405 PPC405GP + sbc8240 MPC8240 + sbc405 PPC405GP Stefan Roese <sr@denx.de> - P3M7448 MPC7448 - - uc100 MPC857 - - TQM85xx MPC8540/8541/8555/8560 - - acadia PPC405EZ - alpr PPC440GX - bamboo PPC440EP - bunbinga PPC405EP - canyonlands PPC460EX - ebony PPC440GP - glacier PPC460GT - haleakala PPC405EXr - katmai PPC440SPe - kilauea PPC405EX - lwmon5 PPC440EPx - makalu PPC405EX - ocotea PPC440GX - p3p440 PPC440GP - pcs440ep PPC440EP - rainier PPC440GRx - sequoia PPC440EPx - sycamore PPC405GPr - taishan PPC440GX - walnut PPC405GP - yellowstone PPC440GR - yosemite PPC440EP - zeus PPC405EP - - P3M750 PPC750FX/GX/GL + P3M7448 MPC7448 + + uc100 MPC857 + + TQM85xx MPC8540/8541/8555/8560 + + acadia PPC405EZ + alpr PPC440GX + bamboo PPC440EP + bunbinga PPC405EP + canyonlands PPC460EX + ebony PPC440GP + glacier PPC460GT + haleakala PPC405EXr + katmai PPC440SPe + kilauea PPC405EX + lwmon5 PPC440EPx + makalu PPC405EX + ocotea PPC440GX + p3p440 PPC440GP + pcs440ep PPC440EP + rainier PPC440GRx + sequoia PPC440EPx + sycamore PPC405GPr + taishan PPC440GX + walnut PPC405GP + yellowstone PPC440GR + yosemite PPC440EP + zeus PPC405EP + + P3M750 PPC750FX/GX/GL Yusdi Santoso <yusdi_santoso@adaptec.com> @@ -352,404 +351,405 @@ Yusdi Santoso <yusdi_santoso@adaptec.com> Travis Sawyer (travis.sawyer@sandburst.com> - KAREF PPC440GX - METROBOX PPC440GX - XPEDITE1K PPC440GX + KAREF PPC440GX + METROBOX PPC440GX + XPEDITE1K PPC440GX Heiko Schocher <hs@denx.de> - ids8247 MPC8247 - jupiter MPC5200 - mgcoge MPC8247 - mgsuvd MPC852 - municse MPC5200 - sc3 PPC405GP - uc101 MPC5200 + ids8247 MPC8247 + jupiter MPC5200 + mgcoge MPC8247 + mgsuvd MPC852 + municse MPC5200 + sc3 PPC405GP + uc101 MPC5200 Peter De Schrijver <p2@mind.be> - ML2 PPC4xx + ML2 PPC4xx Andre Schwarz <andre.schwarz@matrix-vision.de> - mvblm7 MPC8343 + mvbc_p MPC5200 + mvblm7 MPC8343 Timur Tabi <timur@freescale.com> - MPC8349E-mITX MPC8349 - MPC8349E-mITX-GP MPC8349 + MPC8349E-mITX MPC8349 + MPC8349E-mITX-GP MPC8349 Erik Theisen <etheisen@mindspring.com> - W7OLMC PPC4xx - W7OLMG PPC4xx + W7OLMC PPC4xx + W7OLMG PPC4xx Jim Thompson <jim@musenki.com> - MUSENKI MPC8245/8241 - Sandpoint8245 MPC8245 + MUSENKI MPC8245/8241 + Sandpoint8245 MPC8245 Rune Torgersen <runet@innovsys.com> - MPC8266ADS MPC8266 + MPC8266ADS MPC8266 David Updegraff <dave@cray.com> - CRAYL1 PPC4xx + CRAYL1 PPC4xx Anton Vorontsov <avorontsov@ru.mvista.com> - MPC8360ERDK MPC8360 + MPC8360ERDK MPC8360 Josef Wagner <Wagner@Microsys.de> - CPC45 MPC8245 - PM520 MPC5200 + CPC45 MPC8245 + PM520 MPC5200 Stephen Williams <steve@icarus.com> - JSE PPC405GPr + JSE PPC405GPr John Zhan <zhanz@sinovee.com> - svm_sc8xx MPC8xx + svm_sc8xx MPC8xx Guennadi Liakhovetski <g.liakhovetski@gmx.de> - linkstation MPC8241 + linkstation MPC8241 ------------------------------------------------------------------------- Unknown / orphaned boards: - ADS860 MPC8xx - FADS823 MPC8xx - FADS850SAR MPC8xx - FADS860T MPC8xx - GENIETV MPC8xx - IAD210 MPC8xx - MBX MPC8xx - MBX860T MPC8xx - NX823 MPC8xx - RPXClassic MPC8xx - RPXlite MPC8xx + ADS860 MPC8xx + FADS823 MPC8xx + FADS850SAR MPC8xx + FADS860T MPC8xx + GENIETV MPC8xx + IAD210 MPC8xx + MBX MPC8xx + MBX860T MPC8xx + NX823 MPC8xx + RPXClassic MPC8xx + RPXlite MPC8xx - ERIC PPC4xx + ERIC PPC4xx - MOUSSE MPC824x + MOUSSE MPC824x - RPXsuper MPC8260 - rsdproto MPC8260 + RPXsuper MPC8260 + rsdproto MPC8260 - EVB64260 MPC7xx_74xx + EVB64260 MPC7xx_74xx ######################################################################### # ARM Systems: # # # # Maintainer Name, Email Address # -# Board CPU # +# Board CPU # ######################################################################### Rowel Atienza <rowel@diwalabs.com> - armadillo ARM720T + armadillo ARM720T Rishi Bhattacharya <rishi@ti.com> - omap5912osk ARM926EJS + omap5912osk ARM926EJS Cliff Brake <cliff.brake@gmail.com> - pxa255_idp xscale + pxa255_idp xscale Rick Bronson <rick@efn.org> - AT91RM9200DK at91rm9200 + AT91RM9200DK at91rm9200 George G. Davis <gdavis@mvista.com> - assabet SA1100 - gcplus SA1100 + assabet SA1100 + gcplus SA1100 Thomas Elste <info@elste.org> - modnet50 ARM720T (NET+50) + modnet50 ARM720T (NET+50) Peter Figuli <peposh@etc.sk> - wepep250 xscale + wepep250 xscale Marius Gröger <mag@sysgo.de> - impa7 ARM720T (EP7211) - ep7312 ARM720T (EP7312) + impa7 ARM720T (EP7211) + ep7312 ARM720T (EP7312) Kshitij Gupta <kshitij@ti.com> - omap1510inn ARM925T - omap1610inn ARM926EJS - -Kyle Harris <kharris@nexus-tech.net> - - lubbock xscale - cradle xscale - ixdp425 xscale + omap1510inn ARM925T + omap1610inn ARM926EJS Gary Jennejohn <gj@denx.de> - smdk2400 ARM920T - trab ARM920T + smdk2400 ARM920T + trab ARM920T Konstantin Kletschke <kletschke@synertronixx.de> - scb9328 ARM920T + scb9328 ARM920T Nishant Kamat <nskamat@ti.com> - omap1610h2 ARM926EJS + omap1610h2 ARM926EJS Sergey Kubushyn <ksi@koi8.net> - DV-EVM ARM926EJS - SONATA ARM926EJS - SCHMOOGIE ARM926EJS + DV-EVM ARM926EJS + SONATA ARM926EJS + SCHMOOGIE ARM926EJS Prakash Kumar <prakash@embedx.com> - cerf250 xscale + cerf250 xscale David Müller <d.mueller@elsoft.ch> - smdk2410 ARM920T - VCMA9 ARM920T + smdk2410 ARM920T + VCMA9 ARM920T Rolf Offermanns <rof@sysgo.de> - shannon SA1100 + shannon SA1100 Peter Pearse <peter.pearse@arm.com> - integratorcp All current ARM supplied & - supported core modules - -see http://www.arm.com - /products/DevTools - /Hardware_Platforms.html - versatile ARM926EJ-S - versatile ARM926EJ-S + integratorcp All current ARM supplied & supported core modules + -see http://www.arm.com/products/DevTools/Hardware_Platforms.html + versatile ARM926EJ-S + versatile ARM926EJ-S Dave Peverley <dpeverley@mpc-data.co.uk> - omap730p2 ARM926EJS + omap730p2 ARM926EJS Stelian Pop <stelian.pop@leadtechdesign.com> - at91cap9adk ARM926EJS (AT91CAP9 SoC) - at91sam9260ek ARM926EJS (AT91SAM9260 SoC) - at91sam9261ek ARM926EJS (AT91SAM9261 SoC) - at91sam9263ek ARM926EJS (AT91SAM9263 SoC) - at91sam9rlek ARM926EJS (AT91SAM9RL SoC) + at91cap9adk ARM926EJS (AT91CAP9 SoC) + at91sam9260ek ARM926EJS (AT91SAM9260 SoC) + at91sam9261ek ARM926EJS (AT91SAM9261 SoC) + at91sam9263ek ARM926EJS (AT91SAM9263 SoC) + at91sam9rlek ARM926EJS (AT91SAM9RL SoC) Stefan Roese <sr@denx.de> - ixdpg425 xscale - pdnb3 xscale - scpu xscale + ixdpg425 xscale + pdnb3 xscale + scpu xscale Robert Schwebel <r.schwebel@pengutronix.de> - csb226 xscale - innokom xscale + csb226 xscale + innokom xscale Andrea Scian <andrea.scian@dave-tech.it> - B2 ARM7TDMI (S3C44B0X) + B2 ARM7TDMI (S3C44B0X) Greg Ungerer <greg.ungerer@opengear.com> - cm4008 ks8695p - cm4116 ks8695p - cm4148 ks8695p + cm4008 ks8695p + cm4116 ks8695p + cm4148 ks8695p Richard Woodruff <r-woodruff2@ti.com> - omap2420h4 ARM1136EJS + omap2420h4 ARM1136EJS Kyungmin Park <kyungmin.park@samsung.com> - apollon ARM1136EJS + apollon ARM1136EJS Alex Züpke <azu@sysgo.de> - lart SA1100 - dnp1110 SA1110 + lart SA1100 + dnp1110 SA1110 Michael Schwingen <michael@schwingen.org> - actux1 xscale - actux2 xscale - actux3 xscale - actux4 xscale + actux1 xscale + actux2 xscale + actux3 xscale + actux4 xscale + +------------------------------------------------------------------------- + +Unknown / orphaned boards: + Board CPU Last known maintainer / Comment +......................................................................... + cradle xscale Kyle Harris <kharris@nexus-tech.net> / dead address + ixdp425 xscale Kyle Harris <kharris@nexus-tech.net> / dead address + lubbock xscale Kyle Harris <kharris@nexus-tech.net> / dead address ######################################################################### # x86 Systems: # # # # Maintainer Name, Email Address # -# Board CPU # +# Board CPU # ######################################################################### Daniel Engström <daniel@omicron.se> - sc520_cdp x86 + sc520_cdp x86 ######################################################################### # MIPS Systems: # # # # Maintainer Name, Email Address # -# Board CPU # +# Board CPU # ######################################################################### Wolfgang Denk <wd@denx.de> - incaip MIPS32 4Kc - purple MIPS64 5Kc + incaip MIPS32 4Kc + purple MIPS64 5Kc Thomas Lange <thomas@corelatus.se> - dbau1x00 MIPS32 Au1000 - gth2 MIPS32 Au1000 + dbau1x00 MIPS32 Au1000 + gth2 MIPS32 Au1000 Vlad Lungu <vlad.lungu@windriver.com> - qemu_mips MIPS32 + qemu_mips MIPS32 ######################################################################### # Nios-32 Systems: # # # # Maintainer Name, Email Address # -# Board CPU # +# Board CPU # ######################################################################### Stephan Linz <linz@li-pro.net> - DK1S10 Nios-32 - ADNPESC1 Nios-32 + DK1S10 Nios-32 + ADNPESC1 Nios-32 Scott McNutt <smcnutt@psyent.com> - DK1C20 Nios-32 + DK1C20 Nios-32 ######################################################################### # Nios-II Systems: # # # # Maintainer Name, Email Address # -# Board CPU # +# Board CPU # ######################################################################### Scott McNutt <smcnutt@psyent.com> - PCI5441 Nios-II - PK1C20 Nios-II - EP1C20 Nios-II - EP1S10 Nios-II - EP1S40 Nios-II + PCI5441 Nios-II + PK1C20 Nios-II + EP1C20 Nios-II + EP1S10 Nios-II + EP1S40 Nios-II ######################################################################### # MicroBlaze Systems: # # # # Maintainer Name, Email Address # -# Board CPU # +# Board CPU # ######################################################################### Yasushi Shoji <yashi@atmark-techno.com> - SUZAKU MicroBlaze + SUZAKU MicroBlaze Michal Simek <monstr@monstr.eu> - ML401 MicroBlaze - XUPV2P MicroBlaze + ML401 MicroBlaze + XUPV2P MicroBlaze ######################################################################### # Coldfire Systems: # # # # Maintainer Name, Email Address # -# Board CPU # +# Board CPU # ######################################################################### Matthias Fuchs <matthias.fuchs@esd-electronics.com> - TASREG MCF5249 + TASREG MCF5249 TsiChung Liew <Tsi-Chung.Liew@freescale.com> - M52277EVB mcf5227x - M5235EVB mcf52x2 - M5329EVB mcf532x - M5373EVB mcf532x - M54455EVB mcf5445x - M5475EVB mcf547x_8x - M5485EVB mcf547x_8x + M52277EVB mcf5227x + M5235EVB mcf52x2 + M5329EVB mcf532x + M5373EVB mcf532x + M54455EVB mcf5445x + M5475EVB mcf547x_8x + M5485EVB mcf547x_8x Hayden Fraser <Hayden.Fraser@freescale.com> - M5253EVBE mcf52x2 + M5253EVBE mcf52x2 ######################################################################### # AVR32 Systems: # # # # Maintainer Name, Email Address # -# Board CPU # +# Board CPU # ######################################################################### Haavard Skinnemoen <hskinnemoen@atmel.com> - ATSTK1000 AT32AP7xxx - ATSTK1002 AT32AP7000 - ATSTK1003 AT32AP7001 - ATSTK1004 AT32AP7002 - ATSTK1006 AT32AP7000 - ATNGW100 AT32AP7000 + ATSTK1000 AT32AP7xxx + ATSTK1002 AT32AP7000 + ATSTK1003 AT32AP7001 + ATSTK1004 AT32AP7002 + ATSTK1006 AT32AP7000 + ATNGW100 AT32AP7000 ######################################################################### # SuperH Systems: # # # # Maintainer Name, Email Address # -# Board CPU # +# Board CPU # ######################################################################### Nobuhiro Iwamatsu <iwamatsu@nigauri.org> - MS7750SE SH7750 - MS7722SE SH7722 - R7780MP SH7780 - R2DPlus SH7751R - SH7763RDP SH7763 + MS7750SE SH7750 + MS7722SE SH7722 + R7780MP SH7780 + R2DPlus SH7751R + SH7763RDP SH7763 Mark Jonas <mark.jonas@de.bosch.com> - mpr2 SH7720 + mpr2 SH7720 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> - MS7720SE SH7720 + MS7720SE SH7720 Yusuke Goda <goda.yusuke@renesas.com> - MIGO-R SH7722 + MIGO-R SH7722 ######################################################################### # Blackfin Systems: # # # # Maintainer Name, Email Address # -# Board CPU # +# Board CPU # ######################################################################### Mike Frysinger <vapier@gentoo.org> Blackfin Team <u-boot-devel@blackfin.uclinux.org> - BF533-EZKIT BF533 - BF533-STAMP BF533 - BF537-STAMP BF537 - BF561-EZKIT BF561 + BF533-EZKIT BF533 + BF533-STAMP BF533 + BF537-STAMP BF537 + BF561-EZKIT BF561 ######################################################################### # End of MAINTAINERS list # @@ -48,6 +48,7 @@ LIST_5xxx=" \ mecp5200 \ motionpro \ munices \ + MVBC_P \ o2dnt \ pf5200 \ PM520 \ @@ -461,13 +462,6 @@ LIST_ARM7=" \ ######################################################################### LIST_ARM9=" \ - at91cap9adk \ - at91rm9200dk \ - at91sam9260ek \ - at91sam9261ek \ - at91sam9263ek \ - at91sam9rlek \ - cmc_pu2 \ ap920t \ ap922_XA10 \ ap926ejs \ @@ -478,11 +472,7 @@ LIST_ARM9=" \ cp926ejs \ cp946es \ cp966 \ - csb637 \ - kb9202 \ lpd7a400 \ - m501sk \ - mp2usb \ mx1ads \ mx1fs2 \ netstar \ @@ -587,6 +577,7 @@ LIST_arm=" \ ${LIST_ARM9} \ ${LIST_ARM10} \ ${LIST_ARM11} \ + ${LIST_at91} \ ${LIST_pxa} \ ${LIST_ixp} \ " @@ -701,7 +692,7 @@ LIST_coldfire=" \ M52277EVB \ M5235EVB \ M5249EVB \ - M5253EVB \ + M5253EVBE \ M5271EVB \ M5272C3 \ M5275EVB \ @@ -23,8 +23,8 @@ VERSION = 1 PATCHLEVEL = 3 -SUBLEVEL = 3 -EXTRAVERSION = +SUBLEVEL = 4 +EXTRAVERSION = -rc1 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) VERSION_FILE = $(obj)include/version_autogenerated.h @@ -493,6 +493,9 @@ aev_config: unconfig BC3450_config: unconfig @$(MKCONFIG) -a BC3450 ppc mpc5xxx bc3450 +cm5200_config: unconfig + @$(MKCONFIG) -a cm5200 ppc mpc5xxx cm5200 + cpci5200_config: unconfig @$(MKCONFIG) -a cpci5200 ppc mpc5xxx cpci5200 esd @@ -540,9 +543,6 @@ icecube_5100_config: unconfig jupiter_config: unconfig @$(MKCONFIG) jupiter ppc mpc5xxx jupiter -v38b_config: unconfig - @$(MKCONFIG) -a v38b ppc mpc5xxx v38b - inka4x0_config: unconfig @$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0 @@ -617,9 +617,20 @@ prs200_highboot_DDR_config: unconfig mecp5200_config: unconfig @$(MKCONFIG) mecp5200 ppc mpc5xxx mecp5200 esd +motionpro_config: unconfig + @$(MKCONFIG) motionpro ppc mpc5xxx motionpro + munices_config: unconfig @$(MKCONFIG) munices ppc mpc5xxx munices +MVBC_P_config: unconfig + @mkdir -p $(obj)include + @mkdir -p $(obj)board/mvbc_p + @ >$(obj)include/config.h + @[ -z "$(findstring MVBC_P,$@)" ] || \ + { echo "#define CONFIG_MVBC_P" >>$(obj)include/config.h; } + @$(MKCONFIG) -n $@ -a MVBC_P ppc mpc5xxx mvbc_p matrix_vision + o2dnt_config: unconfig @$(MKCONFIG) o2dnt ppc mpc5xxx o2dnt @@ -644,9 +655,6 @@ PM520_ROMBOOT_DDR_config: unconfig smmaco4_config: unconfig @$(MKCONFIG) -a smmaco4 ppc mpc5xxx tqm5200 tqc -cm5200_config: unconfig - @$(MKCONFIG) -a cm5200 ppc mpc5xxx cm5200 - spieval_config: unconfig @$(MKCONFIG) -a spieval ppc mpc5xxx tqm5200 tqc @@ -740,22 +748,23 @@ TQM5200_STK100_config: unconfig { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \ } @$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200 tqc + uc101_config: unconfig @$(MKCONFIG) uc101 ppc mpc5xxx uc101 -motionpro_config: unconfig - @$(MKCONFIG) motionpro ppc mpc5xxx motionpro +v38b_config: unconfig + @$(MKCONFIG) -a v38b ppc mpc5xxx v38b ######################################################################### ## MPC512x Systems ######################################################################### + ads5121_config \ -ads5121_PCI_config \ - : unconfig +ads5121_rev2_config \ + : unconfig @mkdir -p $(obj)include - @if [ "$(findstring _PCI_,$@)" ] ; then \ - echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ - $(XECHO) "... with PCI enabled" ; \ + @if [ "$(findstring rev2,$@)" ] ; then \ + echo "#define CONFIG_ADS5121_REV2 1" > $(obj)include/config.h; \ fi @$(MKCONFIG) -a ads5121 ppc mpc512x ads5121 @@ -1220,6 +1229,9 @@ CATcenter_33_config: unconfig } @$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave +CMS700_config: unconfig + @$(MKCONFIG) $(@:_config=) ppc ppc4xx cms700 esd + CPCI2DP_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci2dp esd @@ -1401,6 +1413,9 @@ quad100hd_config: unconfig sbc405_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx sbc405 +sc3_config:unconfig + @$(MKCONFIG) $(@:_config=) ppc ppc4xx sc3 + sequoia_config \ rainier_config: unconfig @mkdir -p $(obj)include @@ -1419,9 +1434,6 @@ rainier_nand_config: unconfig @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk -sc3_config:unconfig - @$(MKCONFIG) $(@:_config=) ppc ppc4xx sc3 - taihu_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx taihu amcc @@ -1434,9 +1446,6 @@ VOH405_config: unconfig VOM405_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx vom405 esd -CMS700_config: unconfig - @$(MKCONFIG) $(@:_config=) ppc ppc4xx cms700 esd - W7OLMC_config \ W7OLMG_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx w7o @@ -1861,9 +1870,6 @@ M5275EVB_config : unconfig M5282EVB_config : unconfig @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5282evb -TASREG_config : unconfig - @$(MKCONFIG) $(@:_config=) m68k mcf52x2 tasreg esd - M5329AFEE_config \ M5329BFEE_config : unconfig @case "$@" in \ @@ -1983,6 +1989,9 @@ M5485HFE_config : unconfig fi @$(MKCONFIG) -a M5485EVB m68k mcf547x_8x m548xevb freescale +TASREG_config : unconfig + @$(MKCONFIG) $(@:_config=) m68k mcf52x2 tasreg esd + ######################################################################### ## MPC83xx Systems ######################################################################### @@ -2306,12 +2315,12 @@ PCIPPC2_config \ PCIPPC6_config: unconfig @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx pcippc2 -ZUMA_config: unconfig - @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260 - ppmc7xx_config: unconfig @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx ppmc7xx +ZUMA_config: unconfig + @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260 + #======================================================================== # ARM #======================================================================== @@ -2363,12 +2372,12 @@ csb637_config : unconfig kb9202_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm920t kb9202 NULL at91rm9200 -mp2usb_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t mp2usb NULL at91rm9200 - m501sk_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm920t m501sk NULL at91rm9200 +mp2usb_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm920t mp2usb NULL at91rm9200 + ######################################################################### ## Atmel ARM926EJ-S Systems ######################################################################### @@ -2405,6 +2414,18 @@ cp922_XA10_config \ cp1026_config: unconfig @board/integratorcp/split_by_variant.sh $@ +davinci_dvevm_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm926ejs dv-evm davinci davinci + +davinci_schmoogie_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm926ejs schmoogie davinci davinci + +davinci_sffsdr_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm926ejs sffsdr davinci davinci + +davinci_sonata_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm926ejs sonata davinci davinci + lpd7a400_config \ lpd7a404_config: unconfig @$(MKCONFIG) $(@:_config=) arm lh7a40x lpd7a40x @@ -2421,21 +2442,6 @@ netstar_config: unconfig omap1510inn_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm925t omap1510inn -omap5912osk_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk NULL omap - -davinci_dvevm_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs dv-evm davinci davinci - -davinci_schmoogie_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs schmoogie davinci davinci - -davinci_sffsdr_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs sffsdr davinci davinci - -davinci_sonata_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs sonata davinci davinci - xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1)))) omap1610inn_config \ @@ -2459,6 +2465,9 @@ omap1610h2_cs_autoboot_config: unconfig fi; @$(MKCONFIG) -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn NULL omap +omap5912osk_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk NULL omap + xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1))) omap730p2_config \ @@ -2520,9 +2529,16 @@ trab_old_config: unconfig VCMA9_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm920t vcma9 mpl s3c24x0 -#======================================================================== +######################################################################### # ARM supplied Versatile development boards -#======================================================================== +######################################################################### + +cm4008_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm920t cm4008 NULL ks8695 + +cm41xx_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm920t cm41xx NULL ks8695 + versatile_config \ versatileab_config \ versatilepb_config : unconfig @@ -2531,12 +2547,6 @@ versatilepb_config : unconfig voiceblue_config: unconfig @$(MKCONFIG) $(@:_config=) arm arm925t voiceblue -cm4008_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t cm4008 NULL ks8695 - -cm41xx_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t cm41xx NULL ks8695 - ######################################################################### ## S3C44B0 Systems ######################################################################### @@ -2651,8 +2661,6 @@ zylonite_config : ######################################################################### ## ARM1136 Systems ######################################################################### -omap2420h4_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 NULL omap24xx apollon_config : unconfig @mkdir -p $(obj)include @@ -2669,6 +2677,9 @@ imx31_phycore_config : unconfig mx31ads_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads NULL mx31 +omap2420h4_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 NULL omap24xx + #======================================================================== # i386 #======================================================================== @@ -2718,6 +2729,7 @@ tb0229_config: unconfig ######################################################################### ## MIPS32 AU1X00 ######################################################################### + dbau1000_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_DBAU1000 1" >$(obj)include/config.h @@ -2743,17 +2755,17 @@ dbau1550_el_config : unconfig @echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 +gth2_config : unconfig + @mkdir -p $(obj)include + @echo "#define CONFIG_GTH2 1" >$(obj)include/config.h + @$(MKCONFIG) -a gth2 mips mips gth2 + pb1000_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_PB1000 1" >$(obj)include/config.h @$(MKCONFIG) -a pb1x00 mips mips pb1x00 -gth2_config: unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_GTH2 1" >$(obj)include/config.h - @$(MKCONFIG) -a gth2 mips mips gth2 - -qemu_mips_config: unconfig +qemu_mips_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_QEMU_MIPS 1" >$(obj)include/config.h @$(MKCONFIG) -a qemu-mips mips mips qemu-mips @@ -2772,6 +2784,24 @@ purple_config : unconfig ## Nios32 ######################################################################### +ADNPESC1_DNPEVA2_base_32_config \ +ADNPESC1_base_32_config \ +ADNPESC1_config: unconfig + @mkdir -p $(obj)include + @[ -z "$(findstring _DNPEVA2,$@)" ] || \ + { echo "#define CONFIG_DNPEVA2 1" >>$(obj)include/config.h ; \ + $(XECHO) "... DNP/EVA2 configuration" ; \ + } + @[ -z "$(findstring _base_32,$@)" ] || \ + { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \ + $(XECHO) "... NIOS 'base_32' configuration" ; \ + } + @[ -z "$(findstring ADNPESC1_config,$@)" ] || \ + { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \ + $(XECHO) "... NIOS 'base_32' configuration (DEFAULT)" ; \ + } + @$(MKCONFIG) -a ADNPESC1 nios nios adnpesc1 ssv + DK1C20_safe_32_config \ DK1C20_standard_32_config \ DK1C20_config: unconfig @@ -2813,24 +2843,6 @@ DK1S10_config: unconfig } @$(MKCONFIG) -a DK1S10 nios nios dk1s10 altera -ADNPESC1_DNPEVA2_base_32_config \ -ADNPESC1_base_32_config \ -ADNPESC1_config: unconfig - @mkdir -p $(obj)include - @[ -z "$(findstring _DNPEVA2,$@)" ] || \ - { echo "#define CONFIG_DNPEVA2 1" >>$(obj)include/config.h ; \ - $(XECHO) "... DNP/EVA2 configuration" ; \ - } - @[ -z "$(findstring _base_32,$@)" ] || \ - { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \ - $(XECHO) "... NIOS 'base_32' configuration" ; \ - } - @[ -z "$(findstring ADNPESC1_config,$@)" ] || \ - { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \ - $(XECHO) "... NIOS 'base_32' configuration (DEFAULT)" ; \ - } - @$(MKCONFIG) -a ADNPESC1 nios nios adnpesc1 ssv - ######################################################################### ## Nios-II ######################################################################### @@ -2851,21 +2863,19 @@ PCI5441_config : unconfig @$(MKCONFIG) PCI5441 nios2 nios2 pci5441 psyent #======================================================================== -# MicroBlaze -#======================================================================== -######################################################################### ## Microblaze -######################################################################### -suzaku_config: unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_SUZAKU 1" > $(obj)include/config.h - @$(MKCONFIG) -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno +#======================================================================== ml401_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_ML401 1" > $(obj)include/config.h @$(MKCONFIG) -a $(@:_config=) microblaze microblaze ml401 xilinx +suzaku_config: unconfig + @mkdir -p $(obj)include + @echo "#define CONFIG_SUZAKU 1" > $(obj)include/config.h + @$(MKCONFIG) -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno + xupv2p_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_XUPV2P 1" > $(obj)include/config.h @@ -2888,9 +2898,9 @@ $(BFIN_BOARDS): #======================================================================== # AVR32 #======================================================================== -######################################################################### -## AT32AP70xx -######################################################################### + +atngw100_config : unconfig + @$(MKCONFIG) $(@:_config=) avr32 at32ap atngw100 atmel at32ap700x atstk1002_config : unconfig @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x @@ -2904,16 +2914,14 @@ atstk1004_config : unconfig atstk1006_config : unconfig @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x -atngw100_config : unconfig - @$(MKCONFIG) $(@:_config=) avr32 at32ap atngw100 atmel at32ap700x - -######################################################################### -######################################################################### -######################################################################### +#======================================================================== +# SH3 (SuperH) +#======================================================================== ######################################################################### ## sh3 (Renesas SuperH) ######################################################################### + mpr2_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_MPR2 1" > $(obj)include/config.h @@ -2927,6 +2935,12 @@ ms7720se_config: unconfig ######################################################################### ## sh4 (Renesas SuperH) ######################################################################### + +MigoR_config : unconfig + @mkdir -p $(obj)include + @echo "#define CONFIG_MIGO_R 1" > $(obj)include/config.h + @./mkconfig -a $(@:_config=) sh sh4 MigoR + ms7750se_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_MS7750SE 1" > $(obj)include/config.h @@ -2937,21 +2951,16 @@ ms7722se_config : unconfig @echo "#define CONFIG_MS7722SE 1" > $(obj)include/config.h @$(MKCONFIG) -a $(@:_config=) sh sh4 ms7722se -MigoR_config : unconfig +r2dplus_config : unconfig @mkdir -p $(obj)include - @echo "#define CONFIG_MIGO_R 1" > $(obj)include/config.h - @./mkconfig -a $(@:_config=) sh sh4 MigoR + @echo "#define CONFIG_R2DPLUS 1" > $(obj)include/config.h + @./mkconfig -a $(@:_config=) sh sh4 r2dplus r7780mp_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_R7780MP 1" > $(obj)include/config.h @./mkconfig -a $(@:_config=) sh sh4 r7780mp -r2dplus_config : unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_R2DPLUS 1" > $(obj)include/config.h - @./mkconfig -a $(@:_config=) sh sh4 r2dplus - sh7763rdp_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_SH7763RDP 1" > $(obj)include/config.h @@ -2960,6 +2969,7 @@ sh7763rdp_config : unconfig #======================================================================== # SPARC #======================================================================== + ######################################################################### ## LEON3 ######################################################################### diff --git a/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c b/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c index fad9c406d9..39c97b1f53 100644 --- a/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c +++ b/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c @@ -41,51 +41,51 @@ int checkboard (void) phys_size_t initdram (int board_type) { - int size,i; + int size, i; size = 0; - MCFSDRAMC_DCR = MCFSDRAMC_DCR_RTIM_6 - | MCFSDRAMC_DCR_RC((15 * CFG_CLK)>>4); - #ifdef CFG_SDRAM_BASE0 - - MCFSDRAMC_DACR0 = MCFSDRAMC_DACR_BASE(CFG_SDRAM_BASE0) - | MCFSDRAMC_DACR_CASL(1) - | MCFSDRAMC_DACR_CBM(3) - | MCFSDRAMC_DACR_PS_16); - - MCFSDRAMC_DMR0 = MCFSDRAMC_DMR_BAM_16M - | MCFSDRAMC_DMR_V; - - MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_IP; - - *(unsigned short *)(CFG_SDRAM_BASE0) = 0xA5A5; - MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_RE; - for (i=0; i < 2000; i++) - asm(" nop"); - mbar_writeLong(MCFSDRAMC_DACR0, mbar_readLong(MCFSDRAMC_DACR0) - | MCFSDRAMC_DACR_IMRS); - *(unsigned int *)(CFG_SDRAM_BASE0 + 0x220) = 0xA5A5; - size += CFG_SDRAM_SIZE * 1024 * 1024; - #endif - #ifdef CFG_SDRAM_BASE1 - MCFSDRAMC_DACR1 = MCFSDRAMC_DACR_BASE(CFG_SDRAM_BASE1) - | MCFSDRAMC_DACR_CASL(1) - | MCFSDRAMC_DACR_CBM(3) - | MCFSDRAMC_DACR_PS_16; - - MCFSDRAMC_DMR1 = MCFSDRAMC_DMR_BAM_16M - | MCFSDRAMC_DMR_V; - - MCFSDRAMC_DACR1 |= MCFSDRAMC_DACR_IP; - - *(unsigned short *)(CFG_SDRAM_BASE1) = 0xA5A5; - MCFSDRAMC_DACR1 |= MCFSDRAMC_DACR_RE; - for (i=0; i < 2000; i++) - asm(" nop"); - MCFSDRAMC_DACR1 |= MCFSDRAMC_DACR_IMRS; - *(unsigned int *)(CFG_SDRAM_BASE1 + 0x220) = 0xA5A5; - size += CFG_SDRAM_SIZE1 * 1024 * 1024; - #endif + MCFSDRAMC_DCR = MCFSDRAMC_DCR_RTIM_6 + | MCFSDRAMC_DCR_RC ((15 * CFG_CLK) >> 4); +#ifdef CFG_SDRAM_BASE0 + + MCFSDRAMC_DACR0 = MCFSDRAMC_DACR_BASE (CFG_SDRAM_BASE0) + | MCFSDRAMC_DACR_CASL (1) + | MCFSDRAMC_DACR_CBM (3) + | MCFSDRAMC_DACR_PS_16; + + MCFSDRAMC_DMR0 = MCFSDRAMC_DMR_BAM_16M | MCFSDRAMC_DMR_V; + + MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_IP; + + *(unsigned short *) (CFG_SDRAM_BASE0) = 0xA5A5; + MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_RE; + for (i = 0; i < 2000; i++) + asm (" nop"); + mbar_writeLong (MCFSDRAMC_DACR0, + mbar_readLong (MCFSDRAMC_DACR0) | MCFSDRAMC_DACR_IMRS); + *(unsigned int *) (CFG_SDRAM_BASE0 + 0x220) = 0xA5A5; + size += CFG_SDRAM_SIZE * 1024 * 1024; +#endif +#ifdef CFG_SDRAM_BASE1 + MCFSDRAMC_DACR1 = MCFSDRAMC_DACR_BASE (CFG_SDRAM_BASE1) + | MCFSDRAMC_DACR_CASL (1) + | MCFSDRAMC_DACR_CBM (3) + | MCFSDRAMC_DACR_PS_16; + + MCFSDRAMC_DMR1 = MCFSDRAMC_DMR_BAM_16M | MCFSDRAMC_DMR_V; + + MCFSDRAMC_DACR1 |= MCFSDRAMC_DACR_IP; + + *(unsigned short *) (CFG_SDRAM_BASE1) = 0xA5A5; + MCFSDRAMC_DACR1 |= MCFSDRAMC_DACR_RE; + + for (i = 0; i < 2000; i++) + asm (" nop"); + + MCFSDRAMC_DACR1 |= MCFSDRAMC_DACR_IMRS; + *(unsigned int *) (CFG_SDRAM_BASE1 + 0x220) = 0xA5A5; + size += CFG_SDRAM_SIZE1 * 1024 * 1024; +#endif return size; } diff --git a/board/BuS/EB+MCF-EV123/cfm_flash.c b/board/BuS/EB+MCF-EV123/cfm_flash.c index b326384102..98e563fc5c 100644 --- a/board/BuS/EB+MCF-EV123/cfm_flash.c +++ b/board/BuS/EB+MCF-EV123/cfm_flash.c @@ -173,7 +173,7 @@ int cfm_flash_write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cn dest = cmf_backdoor_address(addr); while ((cnt>=4) && (rc == ERR_OK)) { - data =*((volatile u32 *) src); + data = *((volatile u32 *) src); *(volatile u32*) dest = data; MCFCFM_CMD = MCFCFM_CMD_PGM; MCFCFM_USTAT = MCFCFM_USTAT_CBEIF; diff --git a/board/BuS/EB+MCF-EV123/flash.c b/board/BuS/EB+MCF-EV123/flash.c index 5e2647ddad..c2a1b6ff62 100644 --- a/board/BuS/EB+MCF-EV123/flash.c +++ b/board/BuS/EB+MCF-EV123/flash.c @@ -348,7 +348,7 @@ int amd_flash_write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt dest = addr; while ((cnt>=2) && (rc == ERR_OK)) { - data =*((volatile u16 *) src); + data = *((volatile u16 *) src); rc=amd_write_word (info,dest,data); src +=2; dest +=2; diff --git a/board/BuS/EB+MCF-EV123/mii.c b/board/BuS/EB+MCF-EV123/mii.c index 3ea20a6109..8ae2ec69ce 100644 --- a/board/BuS/EB+MCF-EV123/mii.c +++ b/board/BuS/EB+MCF-EV123/mii.c @@ -201,7 +201,7 @@ int mii_discover_phy(struct eth_device *dev) } #endif /* CFG_DISCOVER_PHY */ -int mii_init(void) __attribute__((weak,alias("__mii_init"))); +void mii_init(void) __attribute__((weak,alias("__mii_init"))); void __mii_init(void) { diff --git a/board/MAI/AmigaOneG3SE/ps2kbd.c b/board/MAI/AmigaOneG3SE/ps2kbd.c index 39d8149632..724a44db7d 100644 --- a/board/MAI/AmigaOneG3SE/ps2kbd.c +++ b/board/MAI/AmigaOneG3SE/ps2kbd.c @@ -229,7 +229,7 @@ int drv_isa_kbd_init (void) device_t kbddev ; char *stdinname = getenv ("stdin"); - if(isa_kbd_init()==-1) + if(isa_kbd_init() == -1) return -1; memset (&kbddev, 0, sizeof(kbddev)); strcpy(kbddev.name, DEVNAME); @@ -515,7 +515,7 @@ int kbd_read_data(void) int val; unsigned char status; - val=-1; + val = -1; status = kbd_read_status(); if (status & KBD_STAT_OBF) { val = kbd_read_input(); diff --git a/board/MAI/AmigaOneG3SE/usb_uhci.c b/board/MAI/AmigaOneG3SE/usb_uhci.c index 479beedc4d..26cdcdf760 100644 --- a/board/MAI/AmigaOneG3SE/usb_uhci.c +++ b/board/MAI/AmigaOneG3SE/usb_uhci.c @@ -518,7 +518,7 @@ void usb_check_int_chain(void) uhci_td_t *td,*prevtd; for(i=0;i<8;i++) { - prevtd=&td_int[i]; /* the first previous td is the skeleton td */ + prevtd = &td_int[i]; /* the first previous td is the skeleton td */ link=swap_32(td_int[i].link) & 0xfffffff0; /* next in chain */ td=(uhci_td_t *)link; /* assign it */ /* all interrupt TDs are finally linked to the td_int[0]. @@ -595,7 +595,7 @@ int usb_lowlevel_init(void) busdevfunc=pci_find_device(USB_UHCI_VEND_ID,USB_UHCI_DEV_ID,0); /* get PCI Device ID */ - if(busdevfunc==-1) { + if(busdevfunc == -1) { printf("Error USB UHCI (%04X,%04X) not found\n",USB_UHCI_VEND_ID,USB_UHCI_DEV_ID); return -1; } @@ -642,12 +642,12 @@ int usb_lowlevel_init(void) */ int usb_lowlevel_stop(void) { - if(irqvec==-1) + if(irqvec == -1) return 1; irq_free_handler(irqvec); irq_free_handler(0); reset_hc(); - irqvec=-1; + irqvec = -1; return 0; } diff --git a/board/MAI/menu/menu.c b/board/MAI/menu/menu.c deleted file mode 100644 index c0c63a89dd..0000000000 --- a/board/MAI/menu/menu.c +++ /dev/null @@ -1,66 +0,0 @@ -#include "menu.h" - -#define SINGLE_BOX 0 -#define DOUBLE_BOX 1 - -void video_draw_box(int style, int attr, char *title, int separate, int x, int y, int w, int h); -void video_draw_text(int x, int y, int attr, char *text); -void video_save_rect(int x, int y, int w, int h, void *save_area, int clearchar, int clearattr); -void video_restore_rect(int x, int y, int w, int h, void *save_area); -int video_rows(void); -int video_cols(void); - -#define MAX_MENU_OPTIONS 200 - -typedef struct -{ - int used; /* flag if this entry is used */ - int entry_x; /* Character column of the menu entry */ - int entry_y; /* Character line of the entry */ - int option_x; /* Character colum of the option (entry is same) */ -} option_data_t; - -option_data_t odata[MAX_MENU_OPTIONS]; - -int normal_attr = 0x0F; -int select_attr = 0x2F; -int disabled_attr = 0x07; - -menu_t *root_menu; - -int menu_init (menu_t *root) -{ - char *s; - int i; - - s = getenv("menu_normal"); - if (s) normal_attr = atoi(s); - - s = getenv("menu_select"); - if (s) select_attr = atoi(s); - - s = getenv("menu_disabled"); - if (s) disabled_attr = atoi(s); - - for (i=0; i<MAX_MENU_OPTIONS; i++) odata[i].used = 0; - - root_menu = root; -} - -option_data_t *menu_alloc_odata(void) -{ - int i; - for (int i=0; i<MAX_MENU_OPTIONS; i++) - { - if (odata[i].used == 0) return &odata[i]; - } - return NULL; -} - -void menu_free_odata(option_data_t *odata) -{ - odata->used = 0; -} - -void menu_layout (menu_t *menu) -{ diff --git a/board/MAI/menu/menu.h b/board/MAI/menu/menu.h deleted file mode 100644 index 23d89a7068..0000000000 --- a/board/MAI/menu/menu.h +++ /dev/null @@ -1,162 +0,0 @@ -#ifndef MENU_H -#define MENU_H - -/* A single menu */ -typedef void (*menu_finish_callback)(struct menu_s *menu); - -typedef struct menu_s { - char *name; /* Menu name */ - int num_options; /* Number of options in this menu */ - int flags; /* Various flags - see below */ - int option_align; /* Aligns options to a field width of this much characters if != 0 */ - - struct menu_option_s **options; /* Pointer to this menu's options */ - menu_finish_callback callback; /* Called when the menu closes */ -} menu_t; - -/* - * type: Type of the option (see below) - * name: Name to display for this option - * help: Optional help string - * id : optional id number - * sys : pointer for system-specific data, init to NULL and don't touch - */ - -#define OPTION_PREAMBLE \ - int type; \ - char *name; \ - char *help; \ - int id; \ - void *sys; - -/* - * Menu option types. - * There are a number of different layouts for menu options depending - * on their types. Currently there are the following possibilities: - * - * Submenu: - * This entry links to a new menu. - * - * Boolean: - * A simple on/off toggle entry. Booleans can be either yes/no, 0/1 or on/off. - * Optionally, this entry can enable/disable a set of other options. An example would - * be to enable/disable on-board USB, and if enabled give access to further options like - * irq settings, base address etc. - * - * Text: - * A single line/limited number of characters text entry box. Text can be restricted - * to a certain charset (digits/hex digits/all/custom). Result is also available as an - * int if numeric. - * - * Selection: - * One-of-many type of selection entry. User may choose on of a set of strings, which - * maps to a specific value for the variable. - * - * Routine: - * Selecting this calls an entry-specific routine. This can be used for saving contents etc. - * - * Custom: - * Display and behaviour of this entry is defined by a set of callbacks. - */ - -#define MENU_SUBMENU_TYPE 0 -typedef struct menu_submenu_s -{ - OPTION_PREAMBLE - - menu_t * submenu; /* Pointer to the submenu */ -} menu_submenu_t; - -#define MENU_BOOLEAN_TYPE 1 -typedef struct menu_boolean_s -{ - OPTION_PREAMBLE - - char *variable; /* Name of the variable to getenv()/setenv() */ - int subtype; /* Subtype (on/off, 0/1, yes/no, enable/disable), see below */ - int mutex; /* Bit mask of options to enable/disable. Bit 0 is the option - immediately following this one, bit 1 is the next one etc. - bit 7 = 0 means to disable when this option is off, - bit 7 = 1 means to disable when this option is on. - An option is disabled when the type field's upper bit is set */ -} menu_boolean_t; - -/* BOOLEAN Menu flags */ -#define MENU_BOOLEAN_ONOFF 0x01 -#define MENU_BOOLEAN_01 0x02 -#define MENU_BOOLEAN_YESNO 0x03 -#define MENU_BOOLEAN_ENDIS 0x04 -#define MENU_BOOLEAN_TYPE_MASK 0x07 - - -#define MENU_TEXT_TYPE 2 -typedef struct menu_text_s -{ - OPTION_PREAMBLE - - char *variable; /* Name of the variable to getenv()/setenv() */ - int maxchars; /* Max number of characters */ - char *charset; /* Optional charset to use */ - int flags; /* Flags - see below */ -} menu_text_t; - -/* TEXT entry menu flags */ -#define MENU_TEXT_NUMERIC 0x01 -#define MENU_TEXT_HEXADECIMAL 0x02 -#define MENU_TEXT_FREE 0x03 -#define MENU_TEXT_TYPE_MASK 0x07 - - -#define MENU_SELECTION_TYPE 3 -typedef struct menu_select_option_s { - char *map_from; /* Map this variable contents ... */ - char *map_to; /* ... to this menu text and vice versa */ -} menu_select_option_t; - -typedef struct menu_select_s { - OPTION_PREAMBLE int num_options; /* Number of mappings */ - menu_select_option_t **options; - /* Option list array */ -} menu_select_t; - - -#define MENU_ROUTINE_TYPE 4 -typedef void (*menu_routine_callback) (struct menu_routine_s *); - -typedef struct menu_routine_s { - OPTION_PREAMBLE menu_routine_callback callback; - /* routine to be called */ - void *user_data; /* User data, don't care for system */ -} menu_routine_t; - - -#define MENU_CUSTOM_TYPE 5 -typedef void (*menu_custom_draw) (struct menu_custom_s *); -typedef void (*menu_custom_key) (struct menu_custom_s *, int); - -typedef struct menu_custom_s { - OPTION_PREAMBLE menu_custom_draw drawfunc; - menu_custom_key keyfunc; - void *user_data; -} menu_custom_t; - -/* - * The menu option superstructure - */ -typedef struct menu_option_s { - union { - menu_submenu_t m_sub_menu; - menu_boolean_t m_boolean; - menu_text_t m_text; - menu_select_t m_select; - menu_routine_t m_routine; - }; -} menu_option_t; - -/* Init the menu system. Returns <0 on error */ -int menu_init(menu_t *root); - -/* Execute a single menu. Returns <0 on error */ -int menu_do(menu_t *menu); - -#endif diff --git a/board/ads5121/Makefile b/board/ads5121/Makefile index 52d0d3c58c..5b956823ff 100644 --- a/board/ads5121/Makefile +++ b/board/ads5121/Makefile @@ -27,7 +27,7 @@ $(shell mkdir -p $(OBJTREE)/board/freescale/common) LIB = $(obj)lib$(BOARD).a -COBJS-y := $(BOARD).o +COBJS-y := $(BOARD).o iopin.o COBJS-${CONFIG_FSL_DIU_FB} += ads5121_diu.o COBJS-${CONFIG_FSL_DIU_FB} += ../freescale/common/fsl_diu_fb.o COBJS-${CONFIG_FSL_DIU_FB} += ../freescale/common/fsl_logo_bmp.o diff --git a/board/ads5121/README b/board/ads5121/README new file mode 100644 index 0000000000..defcd6b469 --- /dev/null +++ b/board/ads5121/README @@ -0,0 +1,7 @@ +To configure for the current (Rev 3.x) ADS5121 + make ads5121_config +This will automatically include PCI, the Real Time CLock, add backup flash +ability and set the correct frequency and memory configuration. + +To configure for the older Rev 2 ADS5121 type (this will not have PCI) + make ads5121_rev2_config diff --git a/board/ads5121/ads5121.c b/board/ads5121/ads5121.c index ef66663330..8452054e68 100644 --- a/board/ads5121/ads5121.c +++ b/board/ads5121/ads5121.c @@ -23,9 +23,14 @@ #include <common.h> #include <mpc512x.h> +#include "iopin.h" #include <asm/bitops.h> #include <command.h> #include <fdt_support.h> +#ifdef CONFIG_MISC_INIT_R +#include <i2c.h> +#endif +#include "iopin.h" /* for iopin_initialize() prototype */ /* Clocks in use */ #define SCCR1_CLOCKS_EN (CLOCK_SCCR1_CFG_EN | \ @@ -45,29 +50,12 @@ #define CSAW_START(start) ((start) & 0xFFFF0000) #define CSAW_STOP(start, size) (((start) + (size) - 1) >> 16) -#define MPC5121_IOCTL_PSC6_0 (0x284/4) -#define MPC5121_IO_DIU_START (0x288/4) -#define MPC5121_IO_DIU_END (0x2fc/4) - -/* Functional pin muxing */ -#define MPC5121_IO_FUNC1 (0 << 7) -#define MPC5121_IO_FUNC2 (1 << 7) -#define MPC5121_IO_FUNC3 (2 << 7) -#define MPC5121_IO_FUNC4 (3 << 7) -#define MPC5121_IO_ST (1 << 2) -#define MPC5121_IO_DS_1 (0) -#define MPC5121_IO_DS_2 (1) -#define MPC5121_IO_DS_3 (2) -#define MPC5121_IO_DS_4 (3) - long int fixed_sdram(void); int board_early_init_f (void) { volatile immap_t *im = (immap_t *) CFG_IMMR; - u32 lpcaw, tmp32; - volatile ioctrl512x_t *ioctl = &(im->io_ctrl); - int i; + u32 lpcaw; /* * Initialize Local Window for the CPLD registers access (CS2 selects @@ -91,24 +79,27 @@ int board_early_init_f (void) * Without this the flash identification routine fails, as it needs to issue * write commands in order to establish the device ID. */ - *((volatile u8 *)(CFG_CPLD_BASE + 0x08)) = 0xC1; +#ifdef CONFIG_ADS5121_REV2 + *((volatile u8 *)(CFG_CPLD_BASE + 0x08)) = 0xC1; +#else + if (*((u8 *)(CFG_CPLD_BASE + 0x08)) & 0x04) { + *((volatile u8 *)(CFG_CPLD_BASE + 0x08)) = 0xC1; + } else { + /* running from Backup flash */ + *((volatile u8 *)(CFG_CPLD_BASE + 0x08)) = 0x32; + } +#endif + /* + * Configure Flash Speed + */ + *((volatile u32 *)(CFG_IMMR + LPC_OFFSET + CS0_CONFIG)) = CFG_CS0_CFG; /* * Enable clocks */ im->clk.sccr[0] = SCCR1_CLOCKS_EN; im->clk.sccr[1] = SCCR2_CLOCKS_EN; - /* Configure DIU clock pin */ - tmp32 = ioctl->regs[MPC5121_IOCTL_PSC6_0]; - tmp32 &= ~0x1ff; - tmp32 |= MPC5121_IO_FUNC3 | MPC5121_IO_DS_4; - ioctl->regs[MPC5121_IOCTL_PSC6_0] = tmp32; - - /* Initialize IO pins (pin mux) for DIU function */ - for (i = MPC5121_IO_DIU_START; i < MPC5121_IO_DIU_END; i++) - ioctl->regs[i] |= (MPC5121_IO_FUNC3 | MPC5121_IO_DS_4); - return 0; } @@ -217,6 +208,7 @@ long int fixed_sdram (void) int misc_init_r(void) { u8 tmp_val; + extern int ads5121_diu_init(void); /* Using this for DIU init before the driver in linux takes over * Enable the TFP410 Encoder (I2C address 0x38) @@ -250,17 +242,12 @@ int checkboard (void) { ushort brd_rev = *(vu_short *) (CFG_CPLD_BASE + 0x00); uchar cpld_rev = *(vu_char *) (CFG_CPLD_BASE + 0x02); - volatile immap_t *im = (immap_t *) CFG_IMMR; - volatile unsigned long *reg; - int i; printf ("Board: ADS5121 rev. 0x%04x (CPLD rev. 0x%02x)\n", brd_rev, cpld_rev); + /* initialize function mux & slew rate IO inter alia on IO Pins */ + iopin_initialize(); - /* change the slew rate on all pata pins to max */ - reg = (unsigned long *) &(im->io_ctrl.regs[PATA_CE1_IDX]); - for (i = 0; i < 9; i++) - reg[i] |= 0x00000003; return 0; } diff --git a/board/ads5121/ads5121_diu.c b/board/ads5121/ads5121_diu.c index 87cf0cbbe9..26628d3eb5 100644 --- a/board/ads5121/ads5121_diu.c +++ b/board/ads5121/ads5121_diu.c @@ -57,7 +57,7 @@ void diu_set_pixel_clock(unsigned int pixclock) /* Modify PXCLK in GUTS CLKDVDR */ debug("DIU: Current value of CLKDVDR = 0x%08x\n", *clkdvdr); temp = *clkdvdr & 0xFFFFFF00; - *clkdvdr = temp | (pixval & 0x1F); + *clkdvdr = temp | (pixval & 0xFF); debug("DIU: Modified value of CLKDVDR = 0x%08x\n", *clkdvdr); } diff --git a/board/ads5121/iopin.c b/board/ads5121/iopin.c new file mode 100644 index 0000000000..a6792a0e27 --- /dev/null +++ b/board/ads5121/iopin.c @@ -0,0 +1,115 @@ +/* + * (C) Copyright 2008 + * Martha J Marx, Silicon Turnkey Express, mmarx@silicontkx.com + * mpc512x I/O pin/pad initialization for the ADS5121 board + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <linux/types.h> +#include "iopin.h" + +/* IO pin fields */ +#define IO_PIN_FMUX(v) ((v) << 7) /* pin function */ +#define IO_PIN_HOLD(v) ((v) << 5) /* hold time, pci only */ +#define IO_PIN_PUD(v) ((v) << 4) /* if PUE, 0=pull-down, 1=pull-up */ +#define IO_PIN_PUE(v) ((v) << 3) /* pull up/down enable */ +#define IO_PIN_ST(v) ((v) << 2) /* schmitt trigger */ +#define IO_PIN_DS(v) ((v)) /* slew rate */ + +static struct iopin_t { + int p_offset; /* offset from IOCTL_MEM_OFFSET */ + int nr_pins; /* number of pins to set this way */ + int bit_or; /* or in the value instead of overwrite */ + u_long val; /* value to write or or */ +} ioregs_init[] = { + /* FUNC1=FEC_RX_DV Sets Next 3 to FEC pads */ + { + IOCTL_SPDIF_TXCLK, 3, 0, + IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | + IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) + }, + /* Set highest Slew on 9 PATA pins */ + { + IOCTL_PATA_CE1, 9, 1, + IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | + IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) + }, + /* FUNC1=FEC_COL Sets Next 15 to FEC pads */ + { + IOCTL_PSC0_0, 15, 0, + IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | + IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) + }, + /* FUNC1=SPDIF_TXCLK */ + { + IOCTL_LPC_CS1, 1, 0, + IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | + IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3) + }, + /* FUNC2=SPDIF_TX and sets Next pin to SPDIF_RX */ + { + IOCTL_I2C1_SCL, 2, 0, + IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | + IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3) + }, + /* FUNC2=DIU CLK */ + { + IOCTL_PSC6_0, 1, 0, + IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | + IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3) + }, + /* FUNC2=DIU_HSYNC */ + { + IOCTL_PSC6_1, 1, 0, + IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | + IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) + }, + /* FUNC2=DIUVSYNC Sets Next 26 to DIU Pads */ + { + IOCTL_PSC6_4, 26, 0, + IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | + IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) + } +}; + +void iopin_initialize(void) +{ + short i, j, n, p; + u_long *reg; + immap_t *im = (immap_t *)CFG_IMMR; + + reg = (u_long *)&(im->io_ctrl.regs[0]); + + if (sizeof(ioregs_init) == 0) + return; + + n = sizeof(ioregs_init) / sizeof(ioregs_init[0]); + + for (i = 0; i < n; i++) { + for (p = 0, j = ioregs_init[i].p_offset / sizeof(u_long); + p < ioregs_init[i].nr_pins; p++, j++) { + if (ioregs_init[i].bit_or) + reg[j] |= ioregs_init[i].val; + else + reg[j] = ioregs_init[i].val; + } + } + return; +} diff --git a/board/ads5121/iopin.h b/board/ads5121/iopin.h new file mode 100644 index 0000000000..7ef8472f1d --- /dev/null +++ b/board/ads5121/iopin.h @@ -0,0 +1,222 @@ +/* + * (C) Copyright 2008 + * Martha J Marx, Silicon Turnkey Express, mmarx@silicontkx.com + * mpc512x I/O pin/pad initialization for the ADS5121 board + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#define IOCTL_MEM 0x000 +#define IOCTL_GP 0x004 +#define IOCTL_LPC_CLK 0x008 +#define IOCTL_LPC_OE 0x00C +#define IOCTL_LPC_RWB 0x010 +#define IOCTL_LPC_ACK 0x014 +#define IOCTL_LPC_CS0 0x018 +#define IOCTL_NFC_CE0 0x01C +#define IOCTL_LPC_CS1 0x020 +#define IOCTL_LPC_CS2 0x024 +#define IOCTL_LPC_AX03 0x028 +#define IOCTL_EMB_AX02 0x02C +#define IOCTL_EMB_AX01 0x030 +#define IOCTL_EMB_AX00 0x034 +#define IOCTL_EMB_AD31 0x038 +#define IOCTL_EMB_AD30 0x03C +#define IOCTL_EMB_AD29 0x040 +#define IOCTL_EMB_AD28 0x044 +#define IOCTL_EMB_AD27 0x048 +#define IOCTL_EMB_AD26 0x04C +#define IOCTL_EMB_AD25 0x050 +#define IOCTL_EMB_AD24 0x054 +#define IOCTL_EMB_AD23 0x058 +#define IOCTL_EMB_AD22 0x05C +#define IOCTL_EMB_AD21 0x060 +#define IOCTL_EMB_AD20 0x064 +#define IOCTL_EMB_AD19 0x068 +#define IOCTL_EMB_AD18 0x06C +#define IOCTL_EMB_AD17 0x070 +#define IOCTL_EMB_AD16 0x074 +#define IOCTL_EMB_AD15 0x078 +#define IOCTL_EMB_AD14 0x07C +#define IOCTL_EMB_AD13 0x080 +#define IOCTL_EMB_AD12 0x084 +#define IOCTL_EMB_AD11 0x088 +#define IOCTL_EMB_AD10 0x08C +#define IOCTL_EMB_AD09 0x090 +#define IOCTL_EMB_AD08 0x094 +#define IOCTL_EMB_AD07 0x098 +#define IOCTL_EMB_AD06 0x09C +#define IOCTL_EMB_AD05 0x0A0 +#define IOCTL_EMB_AD04 0x0A4 +#define IOCTL_EMB_AD03 0x0A8 +#define IOCTL_EMB_AD02 0x0AC +#define IOCTL_EMB_AD01 0x0B0 +#define IOCTL_EMB_AD00 0x0B4 +#define IOCTL_PATA_CE1 0x0B8 +#define IOCTL_PATA_CE2 0x0BC +#define IOCTL_PATA_ISOLATE 0x0C0 +#define IOCTL_PATA_IOR 0x0C4 +#define IOCTL_PATA_IOW 0x0C8 +#define IOCTL_PATA_IOCHRDY 0x0CC +#define IOCTL_PATA_INTRQ 0x0D0 +#define IOCTL_PATA_DRQ 0x0D4 +#define IOCTL_PATA_DACK 0x0D8 +#define IOCTL_NFC_WP 0x0DC +#define IOCTL_NFC_RB 0x0E0 +#define IOCTL_NFC_ALE 0x0E4 +#define IOCTL_NFC_CLE 0x0E8 +#define IOCTL_NFC_WE 0x0EC +#define IOCTL_NFC_RE 0x0F0 +#define IOCTL_PCI_AD31 0x0F4 +#define IOCTL_PCI_AD30 0x0F8 +#define IOCTL_PCI_AD29 0x0FC +#define IOCTL_PCI_AD28 0x100 +#define IOCTL_PCI_AD27 0x104 +#define IOCTL_PCI_AD26 0x108 +#define IOCTL_PCI_AD25 0x10C +#define IOCTL_PCI_AD24 0x110 +#define IOCTL_PCI_AD23 0x114 +#define IOCTL_PCI_AD22 0x118 +#define IOCTL_PCI_AD21 0x11C +#define IOCTL_PCI_AD20 0x120 +#define IOCTL_PCI_AD19 0x124 +#define IOCTL_PCI_AD18 0x128 +#define IOCTL_PCI_AD17 0x12C +#define IOCTL_PCI_AD16 0x130 +#define IOCTL_PCI_AD15 0x134 +#define IOCTL_PCI_AD14 0x138 +#define IOCTL_PCI_AD13 0x13C +#define IOCTL_PCI_AD12 0x140 +#define IOCTL_PCI_AD11 0x144 +#define IOCTL_PCI_AD10 0x148 +#define IOCTL_PCI_AD09 0x14C +#define IOCTL_PCI_AD08 0x150 +#define IOCTL_PCI_AD07 0x154 +#define IOCTL_PCI_AD06 0x158 +#define IOCTL_PCI_AD05 0x15C +#define IOCTL_PCI_AD04 0x160 +#define IOCTL_PCI_AD03 0x164 +#define IOCTL_PCI_AD02 0x168 +#define IOCTL_PCI_AD01 0x16C +#define IOCTL_PCI_AD00 0x170 +#define IOCTL_PCI_CBE0 0x174 +#define IOCTL_PCI_CBE1 0x178 +#define IOCTL_PCI_CBE2 0x17C +#define IOCTL_PCI_CBE3 0x180 +#define IOCTL_PCI_GNT2 0x184 +#define IOCTL_PCI_REQ2 0x188 +#define IOCTL_PCI_GNT1 0x18C +#define IOCTL_PCI_REQ1 0x190 +#define IOCTL_PCI_GNT0 0x194 +#define IOCTL_PCI_REQ0 0x198 +#define IOCTL_PCI_INTA 0x19C +#define IOCTL_PCI_CLK 0x1A0 +#define IOCTL_PCI_RST_OUT 0x1A4 +#define IOCTL_PCI_FRAME 0x1A8 +#define IOCTL_PCI_IDSEL 0x1AC +#define IOCTL_PCI_DEVSEL 0x1B0 +#define IOCTL_PCI_IRDY 0x1B4 +#define IOCTL_PCI_TRDY 0x1B8 +#define IOCTL_PCI_STOP 0x1BC +#define IOCTL_PCI_PAR 0x1C0 +#define IOCTL_PCI_PERR 0x1C4 +#define IOCTL_PCI_SERR 0x1C8 +#define IOCTL_SPDIF_TXCLK 0x1CC +#define IOCTL_SPDIF_TX 0x1D0 +#define IOCTL_SPDIF_RX 0x1D4 +#define IOCTL_I2C0_SCL 0x1D8 +#define IOCTL_I2C0_SDA 0x1DC +#define IOCTL_I2C1_SCL 0x1E0 +#define IOCTL_I2C1_SDA 0x1E4 +#define IOCTL_I2C2_SCL 0x1E8 +#define IOCTL_I2C2_SDA 0x1EC +#define IOCTL_IRQ0 0x1F0 +#define IOCTL_IRQ1 0x1F4 +#define IOCTL_CAN1_TX 0x1F8 +#define IOCTL_CAN2_TX 0x1FC +#define IOCTL_J1850_TX 0x200 +#define IOCTL_J1850_RX 0x204 +#define IOCTL_PSC_MCLK_IN 0x208 +#define IOCTL_PSC0_0 0x20C +#define IOCTL_PSC0_1 0x210 +#define IOCTL_PSC0_2 0x214 +#define IOCTL_PSC0_3 0x218 +#define IOCTL_PSC0_4 0x21C +#define IOCTL_PSC1_0 0x220 +#define IOCTL_PSC1_1 0x224 +#define IOCTL_PSC1_2 0x228 +#define IOCTL_PSC1_3 0x22C +#define IOCTL_PSC1_4 0x230 +#define IOCTL_PSC2_0 0x234 +#define IOCTL_PSC2_1 0x238 +#define IOCTL_PSC2_2 0x23C +#define IOCTL_PSC2_3 0x240 +#define IOCTL_PSC2_4 0x244 +#define IOCTL_PSC3_0 0x248 +#define IOCTL_PSC3_1 0x24C +#define IOCTL_PSC3_2 0x250 +#define IOCTL_PSC3_3 0x254 +#define IOCTL_PSC3_4 0x258 +#define IOCTL_PSC4_0 0x25C +#define IOCTL_PSC4_1 0x260 +#define IOCTL_PSC4_2 0x264 +#define IOCTL_PSC4_3 0x268 +#define IOCTL_PSC4_4 0x26C +#define IOCTL_PSC5_0 0x270 +#define IOCTL_PSC5_1 0x274 +#define IOCTL_PSC5_2 0x278 +#define IOCTL_PSC5_3 0x27C +#define IOCTL_PSC5_4 0x280 +#define IOCTL_PSC6_0 0x284 +#define IOCTL_PSC6_1 0x288 +#define IOCTL_PSC6_2 0x28C +#define IOCTL_PSC6_3 0x290 +#define IOCTL_PSC6_4 0x294 +#define IOCTL_PSC7_0 0x298 +#define IOCTL_PSC7_1 0x29C +#define IOCTL_PSC7_2 0x2A0 +#define IOCTL_PSC7_3 0x2A4 +#define IOCTL_PSC7_4 0x2A8 +#define IOCTL_PSC8_0 0x2AC +#define IOCTL_PSC8_1 0x2B0 +#define IOCTL_PSC8_2 0x2B4 +#define IOCTL_PSC8_3 0x2B8 +#define IOCTL_PSC8_4 0x2BC +#define IOCTL_PSC9_0 0x2C0 +#define IOCTL_PSC9_1 0x2C4 +#define IOCTL_PSC9_2 0x2C8 +#define IOCTL_PSC9_3 0x2CC +#define IOCTL_PSC9_4 0x2D0 +#define IOCTL_PSC10_0 0x2D4 +#define IOCTL_PSC10_1 0x2D8 +#define IOCTL_PSC10_2 0x2DC +#define IOCTL_PSC10_3 0x2E0 +#define IOCTL_PSC10_4 0x2E4 +#define IOCTL_PSC11_0 0x2E8 +#define IOCTL_PSC11_1 0x2EC +#define IOCTL_PSC11_2 0x2F0 +#define IOCTL_PSC11_3 0x2F4 +#define IOCTL_PSC11_4 0x2F8 +#define IOCTL_HRESET 0x2FC +#define IOCTL_SRESET 0x300 +#define IOCTL_CKSTP_OUT 0x304 +#define IOCTL_USB2_VBUS_PWR_FAULT 0x308 +#define IOCTL_USB2_VBUS_PWR_SELECT 0x30C +#define IOCTL_USB2_PHY_DRVV_BUS 0x310 + +extern void iopin_initialize(void); diff --git a/board/amcc/katmai/katmai.c b/board/amcc/katmai/katmai.c index 3a0b18f30d..f2bed5cd8a 100644 --- a/board/amcc/katmai/katmai.c +++ b/board/amcc/katmai/katmai.c @@ -517,24 +517,3 @@ int post_hotkeys_pressed(void) return (ctrlc()); } #endif - -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) -{ - u32 val[4]; - int rc; - - ft_cpu_setup(blob, bd); - - /* Fixup NOR mapping */ - val[0] = 0; /* chip select number */ - val[1] = 0; /* always 0 */ - val[2] = gd->bd->bi_flashstart; - val[3] = gd->bd->bi_flashsize; - rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges", - val, sizeof(val), 1); - if (rc) - printf("Unable to update property NOR mapping, err=%s\n", - fdt_strerror(rc)); -} -#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/amcc/kilauea/kilauea.c b/board/amcc/kilauea/kilauea.c index f30dc8f924..7b1025526f 100644 --- a/board/amcc/kilauea/kilauea.c +++ b/board/amcc/kilauea/kilauea.c @@ -374,24 +374,3 @@ int post_hotkeys_pressed(void) return 0; /* No hotkeys supported */ } #endif /* CONFIG_POST */ - -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) -{ - u32 val[4]; - int rc; - - ft_cpu_setup(blob, bd); - - /* Fixup NOR mapping */ - val[0] = 0; /* chip select number */ - val[1] = 0; /* always 0 */ - val[2] = gd->bd->bi_flashstart; - val[3] = gd->bd->bi_flashsize; - rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges", - val, sizeof(val), 1); - if (rc) - printf("Unable to update property NOR mapping, err=%s\n", - fdt_strerror(rc)); -} -#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/amcc/makalu/makalu.c b/board/amcc/makalu/makalu.c index 9baec9af67..2b4d3d4b77 100644 --- a/board/amcc/makalu/makalu.c +++ b/board/amcc/makalu/makalu.c @@ -330,24 +330,3 @@ int post_hotkeys_pressed(void) return 0; /* No hotkeys supported */ } #endif /* CONFIG_POST */ - -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) -{ - u32 val[4]; - int rc; - - ft_cpu_setup(blob, bd); - - /* Fixup NOR mapping */ - val[0] = 0; /* chip select number */ - val[1] = 0; /* always 0 */ - val[2] = gd->bd->bi_flashstart; - val[3] = gd->bd->bi_flashsize; - rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges", - val, sizeof(val), 1); - if (rc) - printf("Unable to update property NOR mapping, err=%s\n", - fdt_strerror(rc)); -} -#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c index 5ff9787d3d..b833092f19 100644 --- a/board/amcc/sequoia/sequoia.c +++ b/board/amcc/sequoia/sequoia.c @@ -509,24 +509,3 @@ int post_hotkeys_pressed(void) return 0; /* No hotkeys supported */ } #endif /* CONFIG_POST */ - -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) -{ - u32 val[4]; - int rc; - - ft_cpu_setup(blob, bd); - - /* Fixup NOR mapping */ - val[0] = 0; /* chip select number */ - val[1] = 0; /* always 0 */ - val[2] = gd->bd->bi_flashstart; - val[3] = gd->bd->bi_flashsize; - rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges", - val, sizeof(val), 1); - if (rc) - printf("Unable to update property NOR mapping, err=%s\n", - fdt_strerror(rc)); -} -#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/amcc/taishan/showinfo.c b/board/amcc/taishan/showinfo.c index 040b8004da..5b8b88e856 100644 --- a/board/amcc/taishan/showinfo.c +++ b/board/amcc/taishan/showinfo.c @@ -34,59 +34,59 @@ void show_reset_reg(void) /* read clock regsiter */ printf("===== Display reset and initialize register Start =========\n"); mfcpr(clk_pllc,reg); - printf("cpr_pllc = %#010x\n",reg); + printf("cpr_pllc = %#010lx\n",reg); mfcpr(clk_plld,reg); - printf("cpr_plld = %#010x\n",reg); + printf("cpr_plld = %#010lx\n",reg); mfcpr(clk_primad,reg); - printf("cpr_primad = %#010x\n",reg); + printf("cpr_primad = %#010lx\n",reg); mfcpr(clk_primbd,reg); - printf("cpr_primbd = %#010x\n",reg); + printf("cpr_primbd = %#010lx\n",reg); mfcpr(clk_opbd,reg); - printf("cpr_opbd = %#010x\n",reg); + printf("cpr_opbd = %#010lx\n",reg); mfcpr(clk_perd,reg); - printf("cpr_perd = %#010x\n",reg); + printf("cpr_perd = %#010lx\n",reg); mfcpr(clk_mald,reg); - printf("cpr_mald = %#010x\n",reg); + printf("cpr_mald = %#010lx\n",reg); /* read sdr register */ mfsdr(sdr_ebc,reg); - printf("sdr_ebc = %#010x\n",reg); + printf("sdr_ebc = %#010lx\n",reg); mfsdr(sdr_cp440,reg); - printf("sdr_cp440 = %#010x\n",reg); + printf("sdr_cp440 = %#010lx\n",reg); mfsdr(sdr_xcr,reg); - printf("sdr_xcr = %#010x\n",reg); + printf("sdr_xcr = %#010lx\n",reg); mfsdr(sdr_xpllc,reg); - printf("sdr_xpllc = %#010x\n",reg); + printf("sdr_xpllc = %#010lx\n",reg); mfsdr(sdr_xplld,reg); - printf("sdr_xplld = %#010x\n",reg); + printf("sdr_xplld = %#010lx\n",reg); mfsdr(sdr_pfc0,reg); - printf("sdr_pfc0 = %#010x\n",reg); + printf("sdr_pfc0 = %#010lx\n",reg); mfsdr(sdr_pfc1,reg); - printf("sdr_pfc1 = %#010x\n",reg); + printf("sdr_pfc1 = %#010lx\n",reg); mfsdr(sdr_cust0,reg); - printf("sdr_cust0 = %#010x\n",reg); + printf("sdr_cust0 = %#010lx\n",reg); mfsdr(sdr_cust1,reg); - printf("sdr_cust1 = %#010x\n",reg); + printf("sdr_cust1 = %#010lx\n",reg); mfsdr(sdr_uart0,reg); - printf("sdr_uart0 = %#010x\n",reg); + printf("sdr_uart0 = %#010lx\n",reg); mfsdr(sdr_uart1,reg); - printf("sdr_uart1 = %#010x\n",reg); + printf("sdr_uart1 = %#010lx\n",reg); printf("===== Display reset and initialize register End =========\n"); } @@ -97,13 +97,13 @@ void show_xbridge_info(void) printf("PCI-X chip control registers\n"); mfsdr(sdr_xcr, reg); - printf("sdr_xcr = %#010x\n", reg); + printf("sdr_xcr = %#010lx\n", reg); mfsdr(sdr_xpllc, reg); - printf("sdr_xpllc = %#010x\n", reg); + printf("sdr_xpllc = %#010lx\n", reg); mfsdr(sdr_xplld, reg); - printf("sdr_xplld = %#010x\n", reg); + printf("sdr_xplld = %#010lx\n", reg); printf("PCI-X Bridge Configure registers\n"); printf("PCIX0_VENDID = %#06x\n", in16r(PCIX0_VENDID)); @@ -116,49 +116,49 @@ void show_xbridge_info(void) printf("PCIX0_HDTYPE = %#04x\n", in8(PCIX0_HDTYPE)); printf("PCIX0_BIST = %#04x\n", in8(PCIX0_BIST)); - printf("PCIX0_BAR0 = %#010x\n", in32r(PCIX0_BAR0)); - printf("PCIX0_BAR1 = %#010x\n", in32r(PCIX0_BAR1)); - printf("PCIX0_BAR2 = %#010x\n", in32r(PCIX0_BAR2)); - printf("PCIX0_BAR3 = %#010x\n", in32r(PCIX0_BAR3)); - printf("PCIX0_BAR4 = %#010x\n", in32r(PCIX0_BAR4)); - printf("PCIX0_BAR5 = %#010x\n", in32r(PCIX0_BAR5)); + printf("PCIX0_BAR0 = %#010lx\n", in32r(PCIX0_BAR0)); + printf("PCIX0_BAR1 = %#010lx\n", in32r(PCIX0_BAR1)); + printf("PCIX0_BAR2 = %#010lx\n", in32r(PCIX0_BAR2)); + printf("PCIX0_BAR3 = %#010lx\n", in32r(PCIX0_BAR3)); + printf("PCIX0_BAR4 = %#010lx\n", in32r(PCIX0_BAR4)); + printf("PCIX0_BAR5 = %#010lx\n", in32r(PCIX0_BAR5)); - printf("PCIX0_CISPTR = %#010x\n", in32r(PCIX0_CISPTR)); + printf("PCIX0_CISPTR = %#010lx\n", in32r(PCIX0_CISPTR)); printf("PCIX0_SBSSYSVID = %#010x\n", in16r(PCIX0_SBSYSVID)); printf("PCIX0_SBSSYSID = %#010x\n", in16r(PCIX0_SBSYSID)); - printf("PCIX0_EROMBA = %#010x\n", in32r(PCIX0_EROMBA)); + printf("PCIX0_EROMBA = %#010lx\n", in32r(PCIX0_EROMBA)); printf("PCIX0_CAP = %#04x\n", in8(PCIX0_CAP)); printf("PCIX0_INTLN = %#04x\n", in8(PCIX0_INTLN)); printf("PCIX0_INTPN = %#04x\n", in8(PCIX0_INTPN)); printf("PCIX0_MINGNT = %#04x\n", in8(PCIX0_MINGNT)); printf("PCIX0_MAXLTNCY = %#04x\n", in8(PCIX0_MAXLTNCY)); - printf("PCIX0_BRDGOPT1 = %#010x\n", in32r(PCIX0_BRDGOPT1)); - printf("PCIX0_BRDGOPT2 = %#010x\n", in32r(PCIX0_BRDGOPT2)); - - printf("PCIX0_POM0LAL = %#010x\n", in32r(PCIX0_POM0LAL)); - printf("PCIX0_POM0LAH = %#010x\n", in32r(PCIX0_POM0LAH)); - printf("PCIX0_POM0SA = %#010x\n", in32r(PCIX0_POM0SA)); - printf("PCIX0_POM0PCILAL = %#010x\n", in32r(PCIX0_POM0PCIAL)); - printf("PCIX0_POM0PCILAH = %#010x\n", in32r(PCIX0_POM0PCIAH)); - printf("PCIX0_POM1LAL = %#010x\n", in32r(PCIX0_POM1LAL)); - printf("PCIX0_POM1LAH = %#010x\n", in32r(PCIX0_POM1LAH)); - printf("PCIX0_POM1SA = %#010x\n", in32r(PCIX0_POM1SA)); - printf("PCIX0_POM1PCILAL = %#010x\n", in32r(PCIX0_POM1PCIAL)); - printf("PCIX0_POM1PCILAH = %#010x\n", in32r(PCIX0_POM1PCIAH)); - printf("PCIX0_POM2SA = %#010x\n", in32r(PCIX0_POM2SA)); - - printf("PCIX0_PIM0SA = %#010x\n", in32r(PCIX0_PIM0SA)); - printf("PCIX0_PIM0LAL = %#010x\n", in32r(PCIX0_PIM0LAL)); - printf("PCIX0_PIM0LAH = %#010x\n", in32r(PCIX0_PIM0LAH)); - printf("PCIX0_PIM1SA = %#010x\n", in32r(PCIX0_PIM1SA)); - printf("PCIX0_PIM1LAL = %#010x\n", in32r(PCIX0_PIM1LAL)); - printf("PCIX0_PIM1LAH = %#010x\n", in32r(PCIX0_PIM1LAH)); - printf("PCIX0_PIM2SA = %#010x\n", in32r(PCIX0_PIM1SA)); - printf("PCIX0_PIM2LAL = %#010x\n", in32r(PCIX0_PIM1LAL)); - printf("PCIX0_PIM2LAH = %#010x\n", in32r(PCIX0_PIM1LAH)); - - printf("PCIX0_XSTS = %#010x\n", in32r(PCIX0_STS)); + printf("PCIX0_BRDGOPT1 = %#010lx\n", in32r(PCIX0_BRDGOPT1)); + printf("PCIX0_BRDGOPT2 = %#010lx\n", in32r(PCIX0_BRDGOPT2)); + + printf("PCIX0_POM0LAL = %#010lx\n", in32r(PCIX0_POM0LAL)); + printf("PCIX0_POM0LAH = %#010lx\n", in32r(PCIX0_POM0LAH)); + printf("PCIX0_POM0SA = %#010lx\n", in32r(PCIX0_POM0SA)); + printf("PCIX0_POM0PCILAL = %#010lx\n", in32r(PCIX0_POM0PCIAL)); + printf("PCIX0_POM0PCILAH = %#010lx\n", in32r(PCIX0_POM0PCIAH)); + printf("PCIX0_POM1LAL = %#010lx\n", in32r(PCIX0_POM1LAL)); + printf("PCIX0_POM1LAH = %#010lx\n", in32r(PCIX0_POM1LAH)); + printf("PCIX0_POM1SA = %#010lx\n", in32r(PCIX0_POM1SA)); + printf("PCIX0_POM1PCILAL = %#010lx\n", in32r(PCIX0_POM1PCIAL)); + printf("PCIX0_POM1PCILAH = %#010lx\n", in32r(PCIX0_POM1PCIAH)); + printf("PCIX0_POM2SA = %#010lx\n", in32r(PCIX0_POM2SA)); + + printf("PCIX0_PIM0SA = %#010lx\n", in32r(PCIX0_PIM0SA)); + printf("PCIX0_PIM0LAL = %#010lx\n", in32r(PCIX0_PIM0LAL)); + printf("PCIX0_PIM0LAH = %#010lx\n", in32r(PCIX0_PIM0LAH)); + printf("PCIX0_PIM1SA = %#010lx\n", in32r(PCIX0_PIM1SA)); + printf("PCIX0_PIM1LAL = %#010lx\n", in32r(PCIX0_PIM1LAL)); + printf("PCIX0_PIM1LAH = %#010lx\n", in32r(PCIX0_PIM1LAH)); + printf("PCIX0_PIM2SA = %#010lx\n", in32r(PCIX0_PIM1SA)); + printf("PCIX0_PIM2LAL = %#010lx\n", in32r(PCIX0_PIM1LAL)); + printf("PCIX0_PIM2LAH = %#010lx\n", in32r(PCIX0_PIM1LAH)); + + printf("PCIX0_XSTS = %#010lx\n", in32r(PCIX0_STS)); } int do_show_xbridge_info(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) diff --git a/board/amcc/yosemite/yosemite.c b/board/amcc/yosemite/yosemite.c index 3b1f8e2d79..05be40acdf 100644 --- a/board/amcc/yosemite/yosemite.c +++ b/board/amcc/yosemite/yosemite.c @@ -510,24 +510,3 @@ void board_reset(void) /* give reset to BCSR */ *(unsigned char *)(CFG_BCSR_BASE | 0x06) = 0x09; } - -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) -{ - u32 val[4]; - int rc; - - ft_cpu_setup(blob, bd); - - /* Fixup NOR mapping */ - val[0] = 0; /* chip select number */ - val[1] = 0; /* always 0 */ - val[2] = gd->bd->bi_flashstart; - val[3] = gd->bd->bi_flashsize; - rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges", - val, sizeof(val), 1); - if (rc) - printf("Unable to update property NOR mapping, err=%s\n", - fdt_strerror(rc)); -} -#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/armadillo/flash.c b/board/armadillo/flash.c index 037a6430da..8518856cb1 100644 --- a/board/armadillo/flash.c +++ b/board/armadillo/flash.c @@ -279,7 +279,7 @@ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) int i, rc; wp = (addr & ~1); /* get lower word aligned address */ - printf ("Writing %d short data to 0x%p from 0x%p.\n ", cnt, wp, src); + printf ("Writing %lu short data to 0x%lx from 0x%p.\n ", cnt, wp, src); /* * handle unaligned start bytes diff --git a/board/atmel/at91sam9260ek/at91sam9260ek.c b/board/atmel/at91sam9260ek/at91sam9260ek.c index 836a0c40bf..06d8512cc9 100644 --- a/board/atmel/at91sam9260ek/at91sam9260ek.c +++ b/board/atmel/at91sam9260ek/at91sam9260ek.c @@ -188,8 +188,17 @@ static void at91sam9260ek_macb_hw_init(void) at91_set_B_periph(AT91_PIN_PA25, 0); /* ERX2 */ at91_set_B_periph(AT91_PIN_PA26, 0); /* ERX3 */ at91_set_B_periph(AT91_PIN_PA27, 0); /* ERXCK */ +#if defined(CONFIG_AT91SAM9260EK) + /* + * use PA10, PA11 for ETX2, ETX3. + * PA23 and PA24 are for TWI EEPROM + */ + at91_set_B_periph(AT91_PIN_PA10, 0); /* ETX2 */ + at91_set_B_periph(AT91_PIN_PA11, 0); /* ETX3 */ +#else at91_set_B_periph(AT91_PIN_PA23, 0); /* ETX2 */ at91_set_B_periph(AT91_PIN_PA24, 0); /* ETX3 */ +#endif at91_set_B_periph(AT91_PIN_PA22, 0); /* ETXER */ #endif diff --git a/board/atum8548/atum8548.c b/board/atum8548/atum8548.c index 4d8c6fbae3..34f4599048 100644 --- a/board/atum8548/atum8548.c +++ b/board/atum8548/atum8548.c @@ -53,7 +53,7 @@ int checkboard (void) volatile ccsr_local_ecm_t *ecm = (void *)(CFG_MPC85xx_ECM_ADDR); if ((uint)&gur->porpllsr != 0xe00e0000) { - printf("immap size error %x\n",&gur->porpllsr); + printf("immap size error %lx\n",(ulong)&gur->porpllsr); } printf ("Board: ATUM8548\n"); diff --git a/board/bc3450/cmd_bc3450.c b/board/bc3450/cmd_bc3450.c index f7f0013c7d..48bc65de22 100644 --- a/board/bc3450/cmd_bc3450.c +++ b/board/bc3450/cmd_bc3450.c @@ -189,7 +189,7 @@ int cmd_dip (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) if (rc > 0x0F) return -1; - printf ("0x%x\n", rc); + printf ("0x%lx\n", rc); return 0; } diff --git a/board/cm5200/cmd_cm5200.c b/board/cm5200/cmd_cm5200.c index 354f2bf6eb..2201bdd8cc 100644 --- a/board/cm5200/cmd_cm5200.c +++ b/board/cm5200/cmd_cm5200.c @@ -335,7 +335,7 @@ int do_rs232(char *argv[]) if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x10000000) != 0x10000000) { error_status = 2; - printf("%s: failure at rs232_4, rxd status is %d " + printf("%s: failure at rs232_4, rxd status is %lu " "(should be 1)\n", __FUNCTION__, ((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x10000000) >> 28); @@ -350,7 +350,7 @@ int do_rs232(char *argv[]) if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x10000000) != 0x00000000) { error_status = 2; - printf("%s: failure at rs232_4, rxd status is %d " + printf("%s: failure at rs232_4, rxd status is %lu " "(should be 0)\n", __FUNCTION__, ((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x10000000) >> 28); @@ -366,7 +366,7 @@ int do_rs232(char *argv[]) if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x20000000) != 0x20000000) { error_status = 3; - printf("%s: failure at rs232_4, cts status is %d " + printf("%s: failure at rs232_4, cts status is %lu " "(should be 1)\n", __FUNCTION__, ((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x20000000) >> 29); @@ -381,7 +381,7 @@ int do_rs232(char *argv[]) if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x20000000) != 0x00000000) { error_status = 3; - printf("%s: failure at rs232_4, cts status is %d " + printf("%s: failure at rs232_4, cts status is %lu " "(should be 0)\n", __FUNCTION__, ((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x20000000) >> 29); diff --git a/board/cm5200/fwupdate.c b/board/cm5200/fwupdate.c index 19aa94a5a0..5a27191352 100644 --- a/board/cm5200/fwupdate.c +++ b/board/cm5200/fwupdate.c @@ -63,7 +63,7 @@ void cm5200_fwupdate(void) if (!bcmd) return; - sprintf(ka, "%lx", LOAD_ADDR); + sprintf(ka, "%lx", (ulong)LOAD_ADDR); /* prepare our bootargs */ rsargs = getenv("rs-args"); diff --git a/board/cobra5272/mii.c b/board/cobra5272/mii.c index d0a4a39f99..b30ba803f9 100644 --- a/board/cobra5272/mii.c +++ b/board/cobra5272/mii.c @@ -200,7 +200,7 @@ int mii_discover_phy(struct eth_device *dev) } #endif /* CFG_DISCOVER_PHY */ -int mii_init(void) __attribute__((weak,alias("__mii_init"))); +void mii_init(void) __attribute__((weak,alias("__mii_init"))); void __mii_init(void) { diff --git a/board/davinci/dv-evm/dv_board.c b/board/davinci/dv-evm/dv_board.c index 88b1e57593..834eb68bd2 100644 --- a/board/davinci/dv-evm/dv_board.c +++ b/board/davinci/dv-evm/dv_board.c @@ -29,14 +29,10 @@ #include <asm/arch/hardware.h> #include <asm/arch/emac_defs.h> -#define MACH_TYPE_DAVINCI_EVM 901 - DECLARE_GLOBAL_DATA_PTR; -extern void i2c_init(int speed, int slaveaddr); extern void timer_init(void); extern int eth_hw_init(void); -extern phy_t phy; /* Works on Always On power domain only (no PD argument) */ @@ -187,11 +183,8 @@ int misc_init_r (void) } } - if (!eth_hw_init()) { + if (!eth_hw_init()) printf("ethernet init failed!\n"); - } else { - printf("ETH PHY : %s\n", phy.name); - } i2c_read (0x39, 0x00, 1, (u_int8_t *)&i, 1); diff --git a/board/davinci/schmoogie/dv_board.c b/board/davinci/schmoogie/dv_board.c index 13d2195819..30175461f0 100644 --- a/board/davinci/schmoogie/dv_board.c +++ b/board/davinci/schmoogie/dv_board.c @@ -29,14 +29,10 @@ #include <asm/arch/hardware.h> #include <asm/arch/emac_defs.h> -#define MACH_TYPE_SCHMOOGIE 1255 - DECLARE_GLOBAL_DATA_PTR; -extern void i2c_init(int speed, int slaveaddr); extern void timer_init(void); extern int eth_hw_init(void); -extern phy_t phy; /* Works on Always On power domain only (no PD argument) */ @@ -233,11 +229,8 @@ int misc_init_r (void) forceenv("serial#", (char *)&tmp[0]); } - if (!eth_hw_init()) { + if (!eth_hw_init()) printf("ethernet init failed!\n"); - } else { - printf("ETH PHY : %s\n", phy.name); - } return(0); } diff --git a/board/davinci/sffsdr/sffsdr.c b/board/davinci/sffsdr/sffsdr.c index b73484ae2b..f41081fd11 100644 --- a/board/davinci/sffsdr/sffsdr.c +++ b/board/davinci/sffsdr/sffsdr.c @@ -43,7 +43,6 @@ DECLARE_GLOBAL_DATA_PTR; extern void timer_init(void); extern int eth_hw_init(void); -extern phy_t phy; /* Works on Always On power domain only (no PD argument) */ @@ -288,11 +287,8 @@ int misc_init_r(void) } } - if (!eth_hw_init()) { + if (!eth_hw_init()) printf("Ethernet init failed\n"); - } else { - printf("ETH PHY: %s\n", phy.name); - } /* On this platform, U-Boot is copied in RAM by the UBL, * so we are always in the relocated state. */ diff --git a/board/davinci/sonata/dv_board.c b/board/davinci/sonata/dv_board.c index e8665e5d3a..a6f9bc71c7 100644 --- a/board/davinci/sonata/dv_board.c +++ b/board/davinci/sonata/dv_board.c @@ -29,14 +29,10 @@ #include <asm/arch/hardware.h> #include <asm/arch/emac_defs.h> -#define MACH_TYPE_SONATA 1254 - DECLARE_GLOBAL_DATA_PTR; -extern void i2c_init(int speed, int slaveaddr); extern void timer_init(void); extern int eth_hw_init(void); -extern phy_t phy; /* Works on Always On power domain only (no PD argument) */ @@ -188,11 +184,8 @@ int misc_init_r (void) } } - if (!eth_hw_init()) { + if (!eth_hw_init()) printf("ethernet init failed!\n"); - } else { - printf("ETH PHY : %s\n", phy.name); - } return(0); } diff --git a/board/delta/nand.c b/board/delta/nand.c index a635a6521b..5024056bc3 100644 --- a/board/delta/nand.c +++ b/board/delta/nand.c @@ -254,7 +254,7 @@ static unsigned long dfc_wait_event(unsigned long event) break; } if(get_delta(start) > timeout) { - DFC_DEBUG1("dfc_wait_event: TIMEOUT waiting for event: 0x%x.\n", event); + DFC_DEBUG1("dfc_wait_event: TIMEOUT waiting for event: 0x%lx.\n", event); return 0xff000000; } diff --git a/board/eltec/elppc/eepro100_srom.c b/board/eltec/elppc/eepro100_srom.c index f021c50cd6..4a9da542f5 100644 --- a/board/eltec/elppc/eepro100_srom.c +++ b/board/eltec/elppc/eepro100_srom.c @@ -31,82 +31,83 @@ #include <net.h> #include "srom.h" -extern int eepro100_write_eeprom (struct eth_device* dev, - int location, int addr_len, unsigned short data); +extern int eepro100_write_eeprom (struct eth_device *dev, + int location, int addr_len, + unsigned short data); /*----------------------------------------------------------------------------*/ unsigned short eepro100_srom_checksum (unsigned short *sromdata) { - unsigned short sum = 0; - unsigned int i; - - for (i = 0; i < (EE_SIZE-1); i++) - { - sum += sromdata[i]; - } - return (EE_CHECKSUM - sum); + unsigned short sum = 0; + unsigned int i; + + for (i = 0; i < (EE_SIZE - 1); i++) { + sum += sromdata[i]; + } + return (EE_CHECKSUM - sum); } /*----------------------------------------------------------------------------*/ int eepro100_srom_store (unsigned short *source) { - int count; - struct eth_device onboard_dev; - - /* get onboard network iobase */ - pci_read_config_dword(PCI_BDF(0,0x10,0), PCI_BASE_ADDRESS_0, - (unsigned int *)&onboard_dev.iobase); - onboard_dev.iobase &= ~0xf; - - source[63] = eepro100_srom_checksum (source); - - for (count=0; count < EE_SIZE; count++) - { - if ( eepro100_write_eeprom ((struct eth_device*)&onboard_dev, - count, EE_ADDR_BITS, SROM_SHORT(source)) == -1 ) - return -1; - source++; - } - return 0; + int count; + struct eth_device onboard_dev; + + /* get onboard network iobase */ + pci_read_config_dword (PCI_BDF (0, 0x10, 0), PCI_BASE_ADDRESS_0, + (unsigned int *) &onboard_dev.iobase); + onboard_dev.iobase &= ~0xf; + + source[63] = eepro100_srom_checksum (source); + + for (count = 0; count < EE_SIZE; count++) { + if (eepro100_write_eeprom ((struct eth_device *) &onboard_dev, + count, EE_ADDR_BITS, + SROM_SHORT (source)) == -1) { + return -1; + } + source++; + } + return 0; } /*----------------------------------------------------------------------------*/ #ifdef EEPRO100_SROM_CHECK -extern int read_eeprom (struct eth_device* dev, int location, int addr_len); +extern int read_eeprom (struct eth_device *dev, int location, int addr_len); void eepro100_srom_load (unsigned short *destination) { - int count; - struct eth_device onboard_dev; + int count; + struct eth_device onboard_dev; + #ifdef DEBUG - int lr = 0; - printf ("eepro100_srom_download:\n"); + int lr = 0; + + printf ("eepro100_srom_download:\n"); #endif - /* get onboard network iobase */ - pci_read_config_dword(PCI_BDF(0,0x10,0), PCI_BASE_ADDRESS_0, - &onboard_dev.iobase); - onboard_dev.iobase &= ~0xf; + /* get onboard network iobase */ + pci_read_config_dword (PCI_BDF (0, 0x10, 0), PCI_BASE_ADDRESS_0, + &onboard_dev.iobase); + onboard_dev.iobase &= ~0xf; - memset (destination, 0x65, 128); + memset (destination, 0x65, 128); - for (count=0; count < 0x40; count++) - { - *destination++ = read_eeprom (struct eth_device*)&onboard_dev, - count, EE_ADDR_BITS); + for (count = 0; count < 0x40; count++) { + *destination++ = read_eeprom ((struct eth_device *) &onboard_dev, + count, EE_ADDR_BITS); #ifdef DEBUG - printf ("%04x ", *(destination - 1)); - if (lr++ == 7) - { - printf("\n"); - lr = 0; - } + printf ("%04x ", *(destination - 1)); + if (lr++ == 7) { + printf ("\n"); + lr = 0; + } #endif - } + } } #endif /* EEPRO100_SROM_CHECK */ diff --git a/board/esd/cpci750/sdram_init.c b/board/esd/cpci750/sdram_init.c index a479f0f5f8..0291937e0b 100644 --- a/board/esd/cpci750/sdram_init.c +++ b/board/esd/cpci750/sdram_init.c @@ -1570,8 +1570,8 @@ dram_size(long int *base, long int maxsize) for (cnt = STARTVAL/sizeof(long); cnt < maxsize/sizeof(long); cnt <<= 1) { addr = base + cnt; /* pointer arith! */ - save1=*addr; /* save contents of addr */ - save2=*b; /* save contents of base */ + save1 = *addr; /* save contents of addr */ + save2 = *b; /* save contents of base */ *addr=cnt; /* write cnt to addr */ *b=0; /* put null at base */ diff --git a/board/esd/pmc440/pmc440.c b/board/esd/pmc440/pmc440.c index 5b811bba9a..0cdaee4452 100644 --- a/board/esd/pmc440/pmc440.c +++ b/board/esd/pmc440/pmc440.c @@ -876,24 +876,3 @@ int usb_board_init_fail(void) return 0; } #endif /* defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_BOARD_INIT) */ - -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) -{ - u32 val[4]; - int rc; - - ft_cpu_setup(blob, bd); - - /* Fixup NOR mapping */ - val[0] = 0; /* chip select number */ - val[1] = 0; /* always 0 */ - val[2] = gd->bd->bi_flashstart; - val[3] = gd->bd->bi_flashsize; - rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges", - val, sizeof(val), 1); - if (rc) - printf("Unable to update property NOR mapping, err=%s\n", - fdt_strerror(rc)); -} -#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/evb64260/eth.c b/board/evb64260/eth.c index 618af6f90c..fa5b6d4a92 100644 --- a/board/evb64260/eth.c +++ b/board/evb64260/eth.c @@ -163,7 +163,7 @@ gt6426x_eth_receive(struct eth_dev_s *p,unsigned int icr) int eth_len=0; char *eth_data; - eth0_rx_desc_single *rx=&p->eth_rx_desc[(p->rdn)]; + eth0_rx_desc_single *rx = &p->eth_rx_desc[(p->rdn)]; INVALIDATE_DCACHE((unsigned int)rx,(unsigned int)(rx+1)); @@ -252,7 +252,7 @@ gt6426x_eth_transmit(void *v, volatile char *p, unsigned int s) #ifdef DEBUG unsigned int old_command_stat,old_psr; #endif - eth0_tx_desc_single *tx=&dev->eth_tx_desc[dev->tdn]; + eth0_tx_desc_single *tx = &dev->eth_tx_desc[dev->tdn]; /* wait for tx to be ready */ INVALIDATE_DCACHE((unsigned int)tx,(unsigned int)(tx+1)); diff --git a/board/evb64260/mpsc.c b/board/evb64260/mpsc.c index 9e8bfe01c4..3b338c72ee 100644 --- a/board/evb64260/mpsc.c +++ b/board/evb64260/mpsc.c @@ -259,7 +259,7 @@ char mpsc_getchar (void) int mpsc_test_char(void) { - volatile unsigned int *p=&rx_desc_base[rx_desc_index*8]; + volatile unsigned int *p = &rx_desc_base[rx_desc_index*8]; INVALIDATE_DCACHE(&p[1], &p[2]); diff --git a/board/fads/flash.c b/board/fads/flash.c index f0fb621271..7cda3a412f 100644 --- a/board/fads/flash.c +++ b/board/fads/flash.c @@ -90,7 +90,7 @@ unsigned long flash_init (void) default: pd_size = 0; or_am = 0xFFE00000; - printf("## Unsupported flash detected by BCSR: 0x%08X\n", bcsr[2]); + printf("## Unsupported flash detected by BCSR: 0x%08lX\n", bcsr[2]); } total_size = 0; diff --git a/board/freescale/common/sys_eeprom.c b/board/freescale/common/sys_eeprom.c index 8b13d06c3d..e53ead04fd 100644 --- a/board/freescale/common/sys_eeprom.c +++ b/board/freescale/common/sys_eeprom.c @@ -1,7 +1,8 @@ /* - * Copyright 2006 Freescale Semiconductor + * Copyright 2006, 2008 Freescale Semiconductor * York Sun (yorksun@freescale.com) * Haiying Wang (haiying.wang@freescale.com) + * Timur Tabi (timur@freescale.com) * * See file CREDITS for list of people who contributed to this * project. @@ -27,258 +28,441 @@ #include <i2c.h> #include <linux/ctype.h> -typedef struct { - u8 id[4]; /* 0x0000 - 0x0003 EEPROM Tag */ - u8 sn[12]; /* 0x0004 - 0x000F Serial Number */ - u8 errata[5]; /* 0x0010 - 0x0014 Errata Level */ - u8 date[6]; /* 0x0015 - 0x001a Build Date */ - u8 res_0; /* 0x001b Reserved */ - u8 version[4]; /* 0x001c - 0x001f Version */ - u8 tempcal[8]; /* 0x0020 - 0x0027 Temperature Calibration Factors*/ - u8 tempcalsys[2]; /* 0x0028 - 0x0029 System Temperature Calibration Factors*/ - u8 res_1[22]; /* 0x0020 - 0x003f Reserved */ - u8 mac_size; /* 0x0040 Mac table size */ - u8 mac_flag; /* 0x0041 Mac table flags */ - u8 mac[8][6]; /* 0x0042 - 0x0071 Mac addresses */ - u32 crc; /* 0x0072 crc32 checksum */ -} EEPROM_data; - -static EEPROM_data mac_data; - -int mac_show(void) +#include "../common/eeprom.h" + +#if !defined(CFG_I2C_EEPROM_CCID) && !defined(CFG_I2C_EEPROM_NXID) +#error "Please define either CFG_I2C_EEPROM_CCID or CFG_I2C_EEPROM_NXID" +#endif + +/** + * static eeprom: EEPROM layout for CCID or NXID formats + * + * See application note AN3638 for details. + */ +static struct __attribute__ ((__packed__)) eeprom { +#ifdef CFG_I2C_EEPROM_CCID + u8 id[4]; /* 0x00 - 0x03 EEPROM Tag 'CCID' */ + u8 major; /* 0x04 Board revision, major */ + u8 minor; /* 0x05 Board revision, minor */ + u8 sn[10]; /* 0x06 - 0x0F Serial Number*/ + u8 errata[2]; /* 0x10 - 0x11 Errata Level */ + u8 date[6]; /* 0x12 - 0x17 Build Date */ + u8 res_0[40]; /* 0x18 - 0x3f Reserved */ + u8 mac_count; /* 0x40 Number of MAC addresses */ + u8 mac_flag; /* 0x41 MAC table flags */ + u8 mac[8][6]; /* 0x42 - 0x71 MAC addresses */ + u32 crc; /* 0x72 CRC32 checksum */ +#endif +#ifdef CFG_I2C_EEPROM_NXID + u8 id[4]; /* 0x00 - 0x03 EEPROM Tag 'NXID' */ + u8 sn[12]; /* 0x04 - 0x0F Serial Number */ + u8 errata[5]; /* 0x10 - 0x14 Errata Level */ + u8 date[6]; /* 0x15 - 0x1a Build Date */ + u8 res_0; /* 0x1b Reserved */ + u32 version; /* 0x1c - 0x1f NXID Version */ + u8 tempcal[8]; /* 0x20 - 0x27 Temperature Calibration Factors */ + u8 tempcalsys[2]; /* 0x28 - 0x29 System Temperature Calibration Factors */ + u8 tempcalflags; /* 0x2a Temperature Calibration Flags */ + u8 res_1[21]; /* 0x2b - 0x3f Reserved */ + u8 mac_count; /* 0x40 Number of MAC addresses */ + u8 mac_flag; /* 0x41 MAC table flags */ + u8 mac[8][6]; /* 0x42 - 0x71 MAC addresses */ + u32 crc; /* 0x72 CRC32 checksum */ +#endif +} e; + +/* Set to 1 if we've read EEPROM into memory */ +static int has_been_read = 0; + +#ifdef CFG_I2C_EEPROM_NXID +/* Is this a valid NXID EEPROM? */ +#define is_valid (*((u32 *)e.id) == (('N' << 24) | ('X' << 16) | ('I' << 8) | 'D')) +#endif + +#ifdef CFG_I2C_EEPROM_CCID +/* Is this a valid CCID EEPROM? */ +#define is_valid (*((u32 *)e.id) == (('C' << 24) | ('C' << 16) | ('I' << 8) | 'D')) +#endif + +/** + * show_eeprom - display the contents of the EEPROM + */ +static void show_eeprom(void) { int i; - u8 mac_size; - unsigned char ethaddr[8][18]; - unsigned char enetvar[32]; - - /* Show EEPROM tagID, - * always the four characters 'NXID'. - */ - printf("ID "); - for (i = 0; i < 4; i++) - printf("%c", mac_data.id[i]); - printf("\n"); - - /* Show Serial number, - * 0 to 11 charaters of errata information. - */ - printf("SN "); - for (i = 0; i < 12; i++) - printf("%c", mac_data.sn[i]); - printf("\n"); - - /* Show Errata Level, - * 0 to 4 characters of errata information. - */ - printf("Errata "); - for (i = 0; i < 5; i++) - printf("%c", mac_data.errata[i]); - printf("\n"); - - /* Show Build Date, - * BCD date values, as YYMMDDhhmmss. - */ - printf("Date 20%02x/%02x/%02x %02x:%02x:%02x\n", - mac_data.date[0], - mac_data.date[1], - mac_data.date[2], - mac_data.date[3], - mac_data.date[4], - mac_data.date[5]); - - /* Show MAC table size, - * Value from 0 to 7 indicating how many MAC - * addresses are stored in the system EEPROM. - */ - if((mac_data.mac_size > 0) && (mac_data.mac_size <= 8)) - mac_size = mac_data.mac_size; - else - mac_size = 8; /* Set the max size */ - printf("MACSIZE %x\n", mac_size); - - /* Show Mac addresses */ - for (i = 0; i < mac_size; i++) { - sprintf((char *)ethaddr[i], - "%02x:%02x:%02x:%02x:%02x:%02x", - mac_data.mac[i][0], - mac_data.mac[i][1], - mac_data.mac[i][2], - mac_data.mac[i][3], - mac_data.mac[i][4], - mac_data.mac[i][5]); - printf("MAC %d %s\n", i, ethaddr[i]); - - sprintf((char *)enetvar, - i ? "eth%daddr" : "ethaddr", i); - setenv((char *)enetvar, (char *)ethaddr[i]); + unsigned int crc; + + /* EEPROM tag ID, either CCID or NXID */ +#ifdef CFG_I2C_EEPROM_NXID + printf("ID: %c%c%c%c v%u\n", e.id[0], e.id[1], e.id[2], e.id[3], + be32_to_cpu(e.version)); +#else + printf("ID: %c%c%c%c\n", e.id[0], e.id[1], e.id[2], e.id[3]); +#endif + + /* Serial number */ + printf("SN: %s\n", e.sn); + + /* Errata level. */ +#ifdef CFG_I2C_EEPROM_NXID + printf("Errata: %s\n", e.errata); +#else + printf("Errata: %c%c\n", + e.errata[0] ? e.errata[0] : '.', + e.errata[1] ? e.errata[1] : '.'); +#endif + + /* Build date, BCD date values, as YYMMDDhhmmss */ + printf("Build date: 20%02x/%02x/%02x %02x:%02x:%02x %s\n", + e.date[0], e.date[1], e.date[2], + e.date[3] & 0x7F, e.date[4], e.date[5], + e.date[3] & 0x80 ? "PM" : ""); + + /* Show MAC addresses */ + for (i = 0; i < min(e.mac_count, 8); i++) { + u8 *p = e.mac[i]; + printf("Eth%u: %02x:%02x:%02x:%02x:%02x:%02x\n", i, + p[0], p[1], p[2], p[3], p[4], p[5]); } - return 0; + crc = crc32(0, (void *)&e, sizeof(e) - 4); + + if (crc == be32_to_cpu(e.crc)) + printf("CRC: %08x\n", be32_to_cpu(e.crc)); + else + printf("CRC: %08x (should be %08x)\n", + be32_to_cpu(e.crc), crc); + +#ifdef DEBUG + printf("EEPROM dump: (0x%x bytes)\n", sizeof(e)); + for (i = 0; i < sizeof(e); i++) { + if ((i % 16) == 0) + printf("%02X: ", i); + printf("%02X ", ((u8 *)&e)[i]); + if (((i % 16) == 15) || (i == sizeof(e) - 1)) + printf("\n"); + } +#endif } -int mac_read(void) +/** + * read_eeprom - read the EEPROM into memory + */ +static int read_eeprom(void) { - int ret, length; - unsigned int crc = 0; - unsigned char dev = ID_EEPROM_ADDR, *data; + int ret; +#ifdef CFG_EEPROM_BUS_NUM + unsigned int bus; +#endif - length = sizeof(EEPROM_data); - ret = i2c_read(dev, 0, 1, (unsigned char *)(&mac_data), length); - if (ret) { - printf("Read failed.\n"); - return -1; - } + if (has_been_read) + return 0; - data = (unsigned char *)(&mac_data); - printf("Check CRC on reading ..."); - crc = crc32(crc, data, length - 4); - if (crc != mac_data.crc) { - printf("CRC checksum is invalid, in EEPROM CRC is %x, calculated CRC is %x\n", - mac_data.crc, crc); - return -1; - } else { - printf("CRC OK\n"); - mac_show(); - } - return 0; +#ifdef CFG_EEPROM_BUS_NUM + bus = i2c_get_bus_num(); + i2c_set_bus_num(CFG_EEPROM_BUS_NUM); +#endif + + ret = i2c_read(CFG_I2C_EEPROM_ADDR, 0, CFG_I2C_EEPROM_ADDR_LEN, + (void *)&e, sizeof(e)); + +#ifdef CFG_EEPROM_BUS_NUM + i2c_set_bus_num(bus); +#endif + +#ifdef DEBUG + show_eeprom(); +#endif + + has_been_read = (ret == 0) ? 1 : 0; + + return ret; } -int mac_prog(void) +/** + * prog_eeprom - write the EEPROM from memory + */ +static int prog_eeprom(void) { int ret, i, length; - unsigned int crc = 0; - unsigned char dev = ID_EEPROM_ADDR, *ptr; - unsigned char *eeprom_data = (unsigned char *)(&mac_data); - - mac_data.res_0 = 0; - memset((void *)mac_data.res_1, 0, sizeof(mac_data.res_1)); - - length = sizeof(EEPROM_data); - crc = crc32(crc, eeprom_data, length - 4); - mac_data.crc = crc; - for (i = 0, ptr = eeprom_data; i < length; i += 8, ptr += 8) { - ret = i2c_write(dev, i, 1, ptr, min((length - i),8)); - udelay(5000); /* 5ms write cycle timing */ + unsigned int crc; + void *p; +#ifdef CFG_EEPROM_BUS_NUM + unsigned int bus; +#endif + + /* Set the reserved values to 0xFF */ +#ifdef CFG_I2C_EEPROM_NXID + e.res_0 = 0xFF; + memset(e.res_1, 0xFF, sizeof(e.res_1)); +#else + memset(e.res_0, 0xFF, sizeof(e.res_0)); +#endif + + length = sizeof(e); + crc = crc32(0, (void *)&e, length - 4); + e.crc = cpu_to_be32(crc); + +#ifdef CFG_EEPROM_BUS_NUM + bus = i2c_get_bus_num(); + i2c_set_bus_num(CFG_EEPROM_BUS_NUM); +#endif + + for (i = 0, p = &e; i < length; i += 8, p += 8) { + ret = i2c_write(CFG_I2C_EEPROM_ADDR, i, CFG_I2C_EEPROM_ADDR_LEN, + p, min((length - i), 8)); if (ret) break; + udelay(5000); /* 5ms write cycle timing */ } + +#ifdef CFG_EEPROM_BUS_NUM + i2c_set_bus_num(bus); +#endif + if (ret) { printf("Programming failed.\n"); return -1; - } else { - printf("Programming %d bytes. Reading back ...\n", length); - mac_read(); } + + printf("Programming passed.\n"); return 0; } -int do_mac(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +/** + * h2i - converts hex character into a number + * + * This function takes a hexadecimal character (e.g. '7' or 'C') and returns + * the integer equivalent. + */ +static inline u8 h2i(char p) +{ + if ((p >= '0') && (p <= '9')) + return p - '0'; + + if ((p >= 'A') && (p <= 'F')) + return (p - 'A') + 10; + + if ((p >= 'a') && (p <= 'f')) + return (p - 'a') + 10; + + return 0; +} + +/** + * set_date - stores the build date into the EEPROM + * + * This function takes a pointer to a string in the format "YYMMDDhhmmss" + * (2-digit year, 2-digit month, etc), converts it to a 6-byte BCD string, + * and stores it in the build date field of the EEPROM local copy. + */ +static void set_date(const char *string) +{ + unsigned int i; + + if (strlen(string) != 12) { + printf("Usage: mac date YYMMDDhhmmss\n"); + return; + } + + for (i = 0; i < 6; i++) + e.date[i] = h2i(string[2 * i]) << 4 | h2i(string[2 * i + 1]); +} + +/** + * set_mac_address - stores a MAC address into the EEPROM + * + * This function takes a pointer to MAC address string + * (i.e."XX:XX:XX:XX:XX:XX", where "XX" is a two-digit hex number) and + * stores it in one of the MAC address fields of the EEPROM local copy. + */ +static void set_mac_address(unsigned int index, const char *string) +{ + char *p = (char *) string; + unsigned int i; + + if (!string) { + printf("Usage: mac <n> XX:XX:XX:XX:XX:XX\n"); + return; + } + + for (i = 0; *p && (i < 6); i++) { + e.mac[index][i] = simple_strtoul(p, &p, 16); + if (*p == ':') + p++; + } +} + +int do_mac(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { int i; - char cmd = 's'; - unsigned long long mac_val; + char cmd; - if (i2c_probe(ID_EEPROM_ADDR) != 0) - return -1; + if (argc == 1) { + show_eeprom(); + return 0; + } + + cmd = argv[1][0]; - if (argc > 1) { - cmd = argv[1][0]; + if (cmd == 'r') { + read_eeprom(); + return 0; + } + + if ((cmd == 'i') && (argc > 2)) { + for (i = 0; i < 4; i++) + e.id[i] = argv[2][i]; + return 0; + } + + if (!is_valid) { + printf("Please read the EEPROM ('r') and/or set the ID ('i') first.\n"); + return 0; + } + + if (argc == 2) { switch (cmd) { - case 'r': /* display */ - mac_read(); - break; case 's': /* save */ - mac_prog(); - break; - case 'i': /* id */ - for (i = 0; i < 4; i++) { - mac_data.id[i] = argv[2][i]; - } + prog_eeprom(); break; - case 'n': /* serial number */ - for (i = 0; i < 12; i++) { - mac_data.sn[i] = argv[2][i]; - } - break; - case 'e': /* errata */ - for (i = 0; i < 5; i++) { - mac_data.errata[i] = argv[2][i]; - } - break; - case 'd': /* date */ - mac_val = simple_strtoull(argv[2], NULL, 16); - for (i = 0; i < 6; i++) { - mac_data.date[i] = (mac_val >> (40 - 8 * i)); - } - break; - case 'p': /* mac table size */ - mac_data.mac_size = - (unsigned char)simple_strtoul(argv[2], NULL, 16); - break; - case '0': /* mac 0 */ - case '1': /* mac 1 */ - case '2': /* mac 2 */ - case '3': /* mac 3 */ - case '4': /* mac 4 */ - case '5': /* mac 5 */ - case '6': /* mac 6 */ - case '7': /* mac 7 */ - mac_val = simple_strtoull(argv[2], NULL, 16); - for (i = 0; i < 6; i++) { - mac_data.mac[cmd - '0'][i] = - *((unsigned char *) - (((unsigned int)(&mac_val)) + i + 2)); - } - break; - case 'h': /* help */ default: printf("Usage:\n%s\n", cmdtp->usage); break; } - } else { - mac_show(); + + return 0; } + + /* We know we have at least one parameter */ + + switch (cmd) { + case 'n': /* serial number */ + memset(e.sn, 0, sizeof(e.sn)); + strncpy((char *)e.sn, argv[2], sizeof(e.sn) - 1); + break; + case 'e': /* errata */ +#ifdef CFG_I2C_EEPROM_NXID + memset(e.errata, 0, 5); + strncpy((char *)e.errata, argv[2], 4); +#else + e.errata[0] = argv[2][0]; + e.errata[1] = argv[2][1]; +#endif + break; + case 'd': /* date BCD format YYMMDDhhmmss */ + set_date(argv[2]); + break; + case 'p': /* MAC table size */ + e.mac_count = simple_strtoul(argv[2], NULL, 16); + break; + case '0' ... '7': /* "mac 0" through "mac 7" */ + set_mac_address(cmd - '0', argv[2]); + break; + case 'h': /* help */ + default: + printf("Usage:\n%s\n", cmdtp->usage); + break; + } + return 0; } +/** + * mac_read_from_eeprom - read the MAC addresses from EEPROM + * + * This function reads the MAC addresses from EEPROM and sets the + * appropriate environment variables for each one read. + * + * The environment variables are only set if they haven't been set already. + * This ensures that any user-saved variables are never overwritten. + * + * This function must be called after relocation. + */ int mac_read_from_eeprom(void) { - int length, i; - unsigned char dev = ID_EEPROM_ADDR; - unsigned char *data; - unsigned char ethaddr[4][18]; - unsigned char enetvar[32]; - unsigned int crc = 0; - - length = sizeof(EEPROM_data); - if (i2c_read(dev, 0, 1, (unsigned char *)(&mac_data), length)) { + unsigned int i; + + if (read_eeprom()) { printf("Read failed.\n"); return -1; } - data = (unsigned char *)(&mac_data); - crc = crc32(crc, data, length - 4); - if (crc != mac_data.crc) { + if (!is_valid) { + printf("Invalid ID (%02x %02x %02x %02x)\n", e.id[0], e.id[1], e.id[2], e.id[3]); return -1; - } else { - for (i = 0; i < 4; i++) { - if (memcmp(&mac_data.mac[i], "\0\0\0\0\0\0", 6)) { - sprintf((char *)ethaddr[i], - "%02x:%02x:%02x:%02x:%02x:%02x", - mac_data.mac[i][0], - mac_data.mac[i][1], - mac_data.mac[i][2], - mac_data.mac[i][3], - mac_data.mac[i][4], - mac_data.mac[i][5]); - sprintf((char *)enetvar, - i ? "eth%daddr" : "ethaddr", - i); - setenv((char *)enetvar, (char *)ethaddr[i]); - } + } + + if (be32_to_cpu(e.crc) != 0xFFFFFFFF) { + u32 crc = crc32(0, (void *)&e, sizeof(e) - 4); + + if (crc != be32_to_cpu(e.crc)) { + printf("CRC mismatch (%08x != %08x).\n", crc, + be32_to_cpu(e.crc)); + return -1; + } + } + + for (i = 0; i < min(4, e.mac_count); i++) { + if (memcmp(&e.mac[i], "\0\0\0\0\0\0", 6) && + memcmp(&e.mac[i], "\xFF\xFF\xFF\xFF\xFF\xFF", 6)) { + char ethaddr[18]; + char enetvar[9]; + + sprintf(ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X", + e.mac[i][0], + e.mac[i][1], + e.mac[i][2], + e.mac[i][3], + e.mac[i][4], + e.mac[i][5]); + sprintf(enetvar, i ? "eth%daddr" : "ethaddr", i); + /* Only initialize environment variables that are blank + * (i.e. have not yet been set) + */ + if (!getenv(enetvar)) + setenv(enetvar, ethaddr); } } + return 0; } + +#ifdef CFG_I2C_EEPROM_CCID + +/** + * get_cpu_board_revision - get the CPU board revision on 85xx boards + * + * Read the EEPROM to determine the board revision. + * + * This function is called before relocation, so we need to read a private + * copy of the EEPROM into a local variable on the stack. + * + * Also, we assume that CFG_EEPROM_BUS_NUM == CFG_SPD_BUS_NUM. The global + * variable i2c_bus_num must be compile-time initialized to CFG_SPD_BUS_NUM, + * so that the SPD code will work. This means that all pre-relocation I2C + * operations can only occur on the CFG_SPD_BUS_NUM bus. So if + * CFG_EEPROM_BUS_NUM != CFG_SPD_BUS_NUM, then we can't read the EEPROM when + * this function is called. Oh well. + */ +unsigned int get_cpu_board_revision(void) +{ + struct board_eeprom { + u32 id; /* 0x00 - 0x03 EEPROM Tag 'CCID' */ + u8 major; /* 0x04 Board revision, major */ + u8 minor; /* 0x05 Board revision, minor */ + } be; + + i2c_read(CFG_I2C_EEPROM_ADDR, 0, CFG_I2C_EEPROM_ADDR_LEN, + (void *)&be, sizeof(be)); + + if (be.id != (('C' << 24) | ('C' << 16) | ('I' << 8) | 'D')) + return MPC85XX_CPU_BOARD_REV(0, 0); + + if ((be.major == 0xff) && (be.minor == 0xff)) + return MPC85XX_CPU_BOARD_REV(0, 0); + + return MPC85XX_CPU_BOARD_REV(e.major, e.minor); +} +#endif diff --git a/board/freescale/m5235evb/m5235evb.c b/board/freescale/m5235evb/m5235evb.c index c2c8fe8590..bd8a4e5e68 100644 --- a/board/freescale/m5235evb/m5235evb.c +++ b/board/freescale/m5235evb/m5235evb.c @@ -75,9 +75,11 @@ phys_size_t initdram(int board_type) sdram->dacr0 = SDRAMC_DARCn_BA(CFG_SDRAM_BASE) | SDRAMC_DARCn_CASL_C1 | SDRAMC_DARCn_CBM_CMD20 | SDRAMC_DARCn_PS_32; + asm("nop"); /* Initialize DMR0 */ sdram->dmr0 = ((dramsize - 1) & 0xFFFC0000) | SDRAMC_DMRn_V; + asm("nop"); /* Set IP (bit 3) in DACR */ sdram->dacr0 |= SDRAMC_DARCn_IP; @@ -100,6 +102,7 @@ phys_size_t initdram(int board_type) /* Finish the configuration by issuing the MRS. */ sdram->dacr0 |= SDRAMC_DARCn_IMRS; + asm("nop"); /* Write to the SDRAM Mode Register */ *(u32 *) (CFG_SDRAM_BASE + 0x400) = 0xA5A59696; diff --git a/board/freescale/m5275evb/Makefile b/board/freescale/m5275evb/Makefile index ef0b19ed2c..f337a7563c 100644 --- a/board/freescale/m5275evb/Makefile +++ b/board/freescale/m5275evb/Makefile @@ -31,7 +31,7 @@ SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): .depend $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) $(ARFLAGS) $@ $(OBJS) ######################################################################### diff --git a/board/freescale/mpc7448hpc2/tsi108_init.c b/board/freescale/mpc7448hpc2/tsi108_init.c index efa952c2e7..ad80694077 100644 --- a/board/freescale/mpc7448hpc2/tsi108_init.c +++ b/board/freescale/mpc7448hpc2/tsi108_init.c @@ -165,8 +165,8 @@ int board_early_init_f (void) printf ("Invalid DDR2 clock setting\n"); return -1; } - printf ("BUS: %d MHz\n", get_board_bus_clk() / 1000000); - printf ("MEM: %d MHz\n", gd->mem_clk / 1000000); + printf ("BUS: %lu MHz\n", get_board_bus_clk() / 1000000); + printf ("MEM: %lu MHz\n", gd->mem_clk / 1000000); return 0; } @@ -622,8 +622,8 @@ int misc_init_r (void) #ifdef CFG_L2 l2cache_enable (); #endif - printf ("BUS: %d MHz\n", gd->bus_clk / 1000000); - printf ("MEM: %d MHz\n", gd->mem_clk / 1000000); + printf ("BUS: %lu MHz\n", gd->bus_clk / 1000000); + printf ("MEM: %lu MHz\n", gd->mem_clk / 1000000); /* * All the information needed to print the cache details is avaiblable diff --git a/board/freescale/mpc8544ds/law.c b/board/freescale/mpc8544ds/law.c index a82dedea3b..54cf36bd45 100644 --- a/board/freescale/mpc8544ds/law.c +++ b/board/freescale/mpc8544ds/law.c @@ -30,7 +30,7 @@ struct law_entry law_table[] = { SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI), SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI), - SET_LAW(CFG_LBC_CACHE_BASE, LAWAR_SIZE_256M, LAW_TRGT_IF_LBC), + SET_LAW(CFG_LBC_NONCACHE_BASE, LAWAR_SIZE_128M, LAW_TRGT_IF_LBC), SET_LAW(CFG_PCIE1_MEM_PHYS, LAWAR_SIZE_256M, LAW_TRGT_IF_PCIE_1), SET_LAW(CFG_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_1), SET_LAW(CFG_PCIE2_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_2), diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c index f615b2384a..c39ce11723 100644 --- a/board/freescale/mpc8544ds/mpc8544ds.c +++ b/board/freescale/mpc8544ds/mpc8544ds.c @@ -47,9 +47,12 @@ int checkboard (void) volatile ccsr_local_ecm_t *ecm = (void *)(CFG_MPC85xx_ECM_ADDR); if ((uint)&gur->porpllsr != 0xe00e0000) { - printf("immap size error %x\n",&gur->porpllsr); + printf("immap size error %lx\n",(ulong)&gur->porpllsr); } - printf ("Board: MPC8544DS\n"); + printf ("Board: MPC8544DS, System ID: 0x%02x, " + "System Version: 0x%02x, FPGA Version: 0x%02x\n", + in8(PIXIS_BASE + PIXIS_ID), in8(PIXIS_BASE + PIXIS_VER), + in8(PIXIS_BASE + PIXIS_PVER)); lbc->ltesr = 0xffffffff; /* Clear LBC error interrupts */ lbc->lteir = 0xffffffff; /* Enable LBC error interrupts */ diff --git a/board/freescale/mpc8544ds/tlb.c b/board/freescale/mpc8544ds/tlb.c index 61fc60986c..40e049951b 100644 --- a/board/freescale/mpc8544ds/tlb.c +++ b/board/freescale/mpc8544ds/tlb.c @@ -79,21 +79,13 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 4, BOOKE_PAGESZ_64M, 1), -#ifdef CFG_LBC_CACHE_BASE /* - * TLB 5: 64M Cacheable, non-guarded - */ - SET_TLB_ENTRY(1, CFG_LBC_CACHE_BASE, CFG_LBC_CACHE_BASE, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 5, BOOKE_PAGESZ_64M, 1), -#endif - /* - * TLB 6: 64M Non-cacheable, guarded + * TLB 5: 64M Non-cacheable, guarded * 0xf8000000 64M PIXIS 0xF8000000 - 0xFBFFFFFF */ SET_TLB_ENTRY(1, CFG_LBC_NONCACHE_BASE, CFG_LBC_NONCACHE_BASE, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 6, BOOKE_PAGESZ_64M, 1), + 0, 5, BOOKE_PAGESZ_64M, 1), }; int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/freescale/mpc8544ds/u-boot.lds b/board/freescale/mpc8544ds/u-boot.lds index 785a00616b..c66c69fcbe 100644 --- a/board/freescale/mpc8544ds/u-boot.lds +++ b/board/freescale/mpc8544ds/u-boot.lds @@ -71,6 +71,7 @@ SECTIONS lib_generic/crc32.o (.text) lib_ppc/extable.o (.text) lib_generic/zlib.o (.text) + drivers/bios_emulator/atibios.o (.text) *(.text) *(.fixup) *(.got1) diff --git a/board/freescale/mpc8610hpcd/mpc8610hpcd.c b/board/freescale/mpc8610hpcd/mpc8610hpcd.c index c85f373c1a..ff1b892b51 100644 --- a/board/freescale/mpc8610hpcd/mpc8610hpcd.c +++ b/board/freescale/mpc8610hpcd/mpc8610hpcd.c @@ -99,7 +99,10 @@ int checkboard(void) volatile immap_t *immap = (immap_t *)CFG_IMMR; volatile ccsr_local_mcm_t *mcm = &immap->im_local_mcm; - puts("Board: MPC8610HPCD\n"); + printf ("Board: MPC8610HPCD, System ID: 0x%02x, " + "System Version: 0x%02x, FPGA Version: 0x%02x\n", + in8(PIXIS_BASE + PIXIS_ID), in8(PIXIS_BASE + PIXIS_VER), + in8(PIXIS_BASE + PIXIS_PVER)); mcm->abcr |= 0x00010000; /* 0 */ mcm->hpmr3 = 0x80000008; /* 4c */ diff --git a/board/freescale/mpc8641hpcn/mpc8641hpcn.c b/board/freescale/mpc8641hpcn/mpc8641hpcn.c index cf540fc651..db46953044 100644 --- a/board/freescale/mpc8641hpcn/mpc8641hpcn.c +++ b/board/freescale/mpc8641hpcn/mpc8641hpcn.c @@ -47,8 +47,10 @@ int board_early_init_f(void) int checkboard(void) { - puts("Board: MPC8641HPCN\n"); - + printf ("Board: MPC8641HPCN, System ID: 0x%02x, " + "System Version: 0x%02x, FPGA Version: 0x%02x\n", + in8(PIXIS_BASE + PIXIS_ID), in8(PIXIS_BASE + PIXIS_VER), + in8(PIXIS_BASE + PIXIS_PVER)); return 0; } diff --git a/board/integratorcp/flash.c b/board/integratorcp/flash.c index b653c058e1..59961cdab6 100644 --- a/board/integratorcp/flash.c +++ b/board/integratorcp/flash.c @@ -393,7 +393,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) *addr = (FPW) 0x00D000D0; } else { #ifdef DEBUG - printf ("Timeout,0x%08x\n", status); + printf ("Timeout,0x%08lx\n", status); #else printf("Timeout\n"); #endif @@ -515,7 +515,7 @@ static int write_data (flash_info_t * info, ulong dest, FPW data) /* Check if Flash is (sufficiently) erased */ if ((*addr & data) != data) { - printf ("not erased at %08lx (%x)\n", (ulong) addr, *addr); + printf ("not erased at %08lx (%lx)\n", (ulong) addr, *addr); return (2); } @@ -542,7 +542,7 @@ static int write_data (flash_info_t * info, ulong dest, FPW data) #ifdef DEBUG *addr = (FPW) 0x00700070; status = *addr; - printf("## status=0x%08x, addr=0x%08x\n", status, addr); + printf("## status=0x%08lx, addr=0x%p\n", status, addr); #endif *addr = (FPW) 0x00500050; /* clear status register cmd */ *addr = (FPW) 0x00FF00FF; /* restore read mode */ diff --git a/board/matrix_vision/mvbc_p/Makefile b/board/matrix_vision/mvbc_p/Makefile new file mode 100644 index 0000000000..ea72f77cdc --- /dev/null +++ b/board/matrix_vision/mvbc_p/Makefile @@ -0,0 +1,50 @@ +# +# (C) Copyright 2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2004-2008 +# Matrix-Vision GmbH, info@matrix-vision.de +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := $(BOARD).o fpga.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend diff --git a/board/matrix_vision/mvbc_p/config.mk b/board/matrix_vision/mvbc_p/config.mk new file mode 100644 index 0000000000..c2c09f4fdc --- /dev/null +++ b/board/matrix_vision/mvbc_p/config.mk @@ -0,0 +1,30 @@ +# +# (C) Copyright 2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp + +ifndef TEXT_BASE +TEXT_BASE = 0xFF800000 +endif + +PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board diff --git a/board/matrix_vision/mvbc_p/fpga.c b/board/matrix_vision/mvbc_p/fpga.c new file mode 100644 index 0000000000..356af1aa54 --- /dev/null +++ b/board/matrix_vision/mvbc_p/fpga.c @@ -0,0 +1,177 @@ +/* + * (C) Copyright 2002 + * Rich Ireland, Enterasys Networks, rireland@enterasys.com. + * Keith Outwater, keith_outwater@mvis.com. + * + * (C) Copyright 2008 + * Andre Schwarz, Matrix Vision GmbH, andre.schwarz@matrix-vision.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include <common.h> +#include <ACEX1K.h> +#include <command.h> +#include "fpga.h" +#include "mvbc_p.h" + +#ifdef FPGA_DEBUG +#define fpga_debug(fmt, args...) printf("%s: "fmt, __func__, ##args) +#else +#define fpga_debug(fmt, args...) +#endif + +Altera_CYC2_Passive_Serial_fns altera_fns = { + fpga_null_fn, + fpga_config_fn, + fpga_status_fn, + fpga_done_fn, + fpga_wr_fn, + fpga_null_fn, + fpga_null_fn, + 0 +}; + +Altera_desc cyclone2 = { + Altera_CYC2, + passive_serial, + Altera_EP2C8_SIZE, + (void *) &altera_fns, + NULL, + 0 +}; + +DECLARE_GLOBAL_DATA_PTR; + +int mvbc_p_init_fpga(void) +{ + fpga_debug("Initialize FPGA interface (reloc 0x%.8lx)\n", + gd->reloc_off); + fpga_init(gd->reloc_off); + fpga_add(fpga_altera, &cyclone2); + fpga_config_fn(0, 1, 0); + udelay(60); + + return 1; +} + +int fpga_null_fn(int cookie) +{ + return 0; +} + +int fpga_config_fn(int assert, int flush, int cookie) +{ + struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio*)MPC5XXX_GPIO; + u32 dvo = gpio->simple_dvo; + + fpga_debug("SET config : %s\n", assert ? "low" : "high"); + if (assert) + dvo |= FPGA_CONFIG; + else + dvo &= ~FPGA_CONFIG; + + if (flush) + gpio->simple_dvo = dvo; + + return assert; +} + +int fpga_done_fn(int cookie) +{ + struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio*)MPC5XXX_GPIO; + int result = 0; + + udelay(10); + fpga_debug("CONF_DONE check ... "); + if (gpio->simple_ival & FPGA_CONF_DONE) { + fpga_debug("high\n"); + result = 1; + } else + fpga_debug("low\n"); + + return result; +} + +int fpga_status_fn(int cookie) +{ + struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio*)MPC5XXX_GPIO; + int result = 0; + + fpga_debug("STATUS check ... "); + if (gpio->sint_ival & FPGA_STATUS) { + fpga_debug("high\n"); + result = 1; + } else + fpga_debug("low\n"); + + return result; +} + +int fpga_clk_fn(int assert_clk, int flush, int cookie) +{ + struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio*)MPC5XXX_GPIO; + u32 dvo = gpio->simple_dvo; + + fpga_debug("CLOCK %s\n", assert_clk ? "high" : "low"); + if (assert_clk) + dvo |= FPGA_CCLK; + else + dvo &= ~FPGA_CCLK; + + if (flush) + gpio->simple_dvo = dvo; + + return assert_clk; +} + +static inline int _write_fpga(u8 val) +{ + int i; + struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio*)MPC5XXX_GPIO; + u32 dvo = gpio->simple_dvo; + + for (i=0; i<8; i++) { + dvo &= ~FPGA_CCLK; + gpio->simple_dvo = dvo; + dvo &= ~FPGA_DIN; + if (val & 1) + dvo |= FPGA_DIN; + gpio->simple_dvo = dvo; + dvo |= FPGA_CCLK; + gpio->simple_dvo = dvo; + val >>= 1; + } + + return 0; +} + +int fpga_wr_fn(void *buf, size_t len, int flush, int cookie) +{ + unsigned char *data = (unsigned char *) buf; + int i; + + fpga_debug("fpga_wr: buf %p / size %d\n", buf, len); + for (i = 0; i < len; i++) + _write_fpga(data[i]); + fpga_debug("\n"); + + return FPGA_SUCCESS; +} diff --git a/include/asm-microblaze/serial_xuartlite.h b/board/matrix_vision/mvbc_p/fpga.h index 6cd1e83b96..37230730a3 100644 --- a/include/asm-microblaze/serial_xuartlite.h +++ b/board/matrix_vision/mvbc_p/fpga.h @@ -1,7 +1,7 @@ /* - * (C) Copyright 2004 Atmark Techno, Inc. - * - * Yasushi SHOJI <yashi@atmark-techno.com> + * (C) Copyright 2002 + * Rich Ireland, Enterasys Networks, rireland@enterasys.com. + * Keith Outwater, keith_outwater@mvis.com. * * See file CREDITS for list of people who contributed to this * project. @@ -20,6 +20,15 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA + * */ -#include <asm/arch/xuartlite_l.h> +extern int mvbc_p_init_fpga(void); + +extern int fpga_pgm_fn(int assert_pgm, int flush, int cookie); +extern int fpga_status_fn(int cookie); +extern int fpga_config_fn(int assert, int flush, int cookie); +extern int fpga_done_fn(int cookie); +extern int fpga_clk_fn(int assert_clk, int flush, int cookie); +extern int fpga_wr_fn(void *buf, size_t len, int flush, int cookie); +extern int fpga_null_fn(int cookie); diff --git a/board/matrix_vision/mvbc_p/mvbc_p.c b/board/matrix_vision/mvbc_p/mvbc_p.c new file mode 100644 index 0000000000..b61e84e387 --- /dev/null +++ b/board/matrix_vision/mvbc_p/mvbc_p.c @@ -0,0 +1,325 @@ +/* + * (C) Copyright 2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2004 + * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. + * + * (C) Copyright 2005-2007 + * Andre Schwarz, Matrix Vision GmbH, andre.schwarz@matrix-vision.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <mpc5xxx.h> +#include <malloc.h> +#include <pci.h> +#include <i2c.h> +#include <environment.h> +#include <fdt_support.h> +#include <asm/io.h> +#include "fpga.h" +#include "mvbc_p.h" + +#define SDRAM_MODE 0x00CD0000 +#define SDRAM_CONTROL 0x504F0000 +#define SDRAM_CONFIG1 0xD2322800 +#define SDRAM_CONFIG2 0x8AD70000 + +DECLARE_GLOBAL_DATA_PTR; + +static void sdram_start (int hi_addr) +{ + long hi_bit = hi_addr ? 0x01000000 : 0; + + /* unlock mode register */ + out_be32((u32*)MPC5XXX_SDRAM_CTRL, SDRAM_CONTROL | 0x80000000 | hi_bit); + + /* precharge all banks */ + out_be32((u32*)MPC5XXX_SDRAM_CTRL, SDRAM_CONTROL | 0x80000002 | hi_bit); + + /* precharge all banks */ + out_be32((u32*)MPC5XXX_SDRAM_CTRL, SDRAM_CONTROL | 0x80000002 | hi_bit); + + /* auto refresh */ + out_be32((u32*)MPC5XXX_SDRAM_CTRL, SDRAM_CONTROL | 0x80000004 | hi_bit); + + /* set mode register */ + out_be32((u32*)MPC5XXX_SDRAM_MODE, SDRAM_MODE); + + /* normal operation */ + out_be32((u32*)MPC5XXX_SDRAM_CTRL, SDRAM_CONTROL | hi_bit); +} + +phys_addr_t initdram (int board_type) +{ + ulong dramsize = 0; + ulong test1, + test2; + + /* setup SDRAM chip selects */ + out_be32((u32*)MPC5XXX_SDRAM_CS0CFG, 0x0000001e); + + /* setup config registers */ + out_be32((u32*)MPC5XXX_SDRAM_CONFIG1, SDRAM_CONFIG1); + out_be32((u32*)MPC5XXX_SDRAM_CONFIG2, SDRAM_CONFIG2); + + /* find RAM size using SDRAM CS0 only */ + sdram_start(0); + test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000); + sdram_start(1); + test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000); + if (test1 > test2) { + sdram_start(0); + dramsize = test1; + } else + dramsize = test2; + + if (dramsize < (1 << 20)) + dramsize = 0; + + if (dramsize > 0) + out_be32((u32*)MPC5XXX_SDRAM_CS0CFG, 0x13 + + __builtin_ffs(dramsize >> 20) - 1); + else + out_be32((u32*)MPC5XXX_SDRAM_CS0CFG, 0); + + return dramsize; +} + +void mvbc_init_gpio(void) +{ + struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio*)MPC5XXX_GPIO; + + printf("Ports : 0x%08x\n", gpio->port_config); + printf("PORCFG: 0x%08x\n", *(vu_long*)MPC5XXX_CDM_PORCFG); + + out_be32(&gpio->simple_ddr, SIMPLE_DDR); + out_be32(&gpio->simple_dvo, SIMPLE_DVO); + out_be32(&gpio->simple_ode, SIMPLE_ODE); + out_be32(&gpio->simple_gpioe, SIMPLE_GPIOEN); + + out_be32((u32*)&gpio->sint_ode, SINT_ODE); + out_be32((u32*)&gpio->sint_ddr, SINT_DDR); + out_be32((u32*)&gpio->sint_dvo, SINT_DVO); + out_be32((u32*)&gpio->sint_inten, SINT_INTEN); + out_be32((u32*)&gpio->sint_itype, SINT_ITYPE); + out_be32((u32*)&gpio->sint_gpioe, SINT_GPIOEN); + + out_8((u8*)MPC5XXX_WU_GPIO_ODE, WKUP_ODE); + out_8((u8*)MPC5XXX_WU_GPIO_DIR, WKUP_DIR); + out_8((u8*)MPC5XXX_WU_GPIO_DATA_O, WKUP_DO); + out_8((u8*)MPC5XXX_WU_GPIO_ENABLE, WKUP_EN); + + printf("simple_gpioe: 0x%08x\n", gpio->simple_gpioe); + printf("sint_gpioe : 0x%08x\n", gpio->sint_gpioe); +} + +void reset_environment(void) +{ + char *s, sernr[64]; + + printf("\n*** RESET ENVIRONMENT ***\n"); + memset(sernr, 0, sizeof(sernr)); + s = getenv("serial#"); + if (s) { + printf("found serial# : %s\n", s); + strncpy(sernr, s, 64); + } + gd->env_valid = 0; + env_relocate(); + if (s) + setenv("serial#", sernr); +} + +int misc_init_r(void) +{ + char *s = getenv("reset_env"); + + if (!s) { + if (in_8((u8*)MPC5XXX_WU_GPIO_DATA_I) & MPC5XXX_GPIO_WKUP_6) + return 0; + udelay(50000); + if (in_8((u8*)MPC5XXX_WU_GPIO_DATA_I) & MPC5XXX_GPIO_WKUP_6) + return 0; + udelay(50000); + if (in_8((u8*)MPC5XXX_WU_GPIO_DATA_I) & MPC5XXX_GPIO_WKUP_6) + return 0; + } + printf(" === FACTORY RESET ===\n"); + reset_environment(); + saveenv(); + + return -1; +} + +int checkboard(void) +{ + mvbc_init_gpio(); + printf("Board: Matrix Vision mvBlueCOUGAR-P\n"); + + return 0; +} + +void flash_preinit(void) +{ + /* + * Now, when we are in RAM, enable flash write + * access for detection process. + * Note that CS_BOOT cannot be cleared when + * executing in flash. + */ + clrbits_be32((u32*)MPC5XXX_BOOTCS_CFG, 0x1); +} + +void flash_afterinit(ulong size) +{ + out_be32((u32*)MPC5XXX_BOOTCS_START, START_REG(CFG_BOOTCS_START | + size)); + out_be32((u32*)MPC5XXX_CS0_START, START_REG(CFG_BOOTCS_START | + size)); + out_be32((u32*)MPC5XXX_BOOTCS_STOP, STOP_REG(CFG_BOOTCS_START | size, + size)); + out_be32((u32*)MPC5XXX_CS0_STOP, STOP_REG(CFG_BOOTCS_START | size, + size)); +} + +void pci_mvbc_fixup_irq(struct pci_controller *hose, pci_dev_t dev) +{ + unsigned char line = 0xff; + u32 base; + + if (PCI_BUS(dev) == 0) { + switch (PCI_DEV (dev)) { + case 0xa: /* FPGA */ + line = 3; + pci_hose_read_config_dword(hose, dev, PCI_BASE_ADDRESS_0, &base); + printf("found FPA - enable arbitration\n"); + writel(0x03, (u32*)(base + 0x80c0)); + writel(0xf0, (u32*)(base + 0x8080)); + break; + case 0xb: /* LAN */ + line = 2; + break; + case 0x1a: + break; + default: + printf ("***pci_scan: illegal dev = 0x%08x\n", PCI_DEV (dev)); + break; + } + pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, line); + } +} + +struct pci_controller hose = { + fixup_irq:pci_mvbc_fixup_irq +}; + +int mvbc_p_load_fpga(void) +{ + size_t data_size = 0; + void *fpga_data = NULL; + char *datastr = getenv("fpgadata"); + char *sizestr = getenv("fpgadatasize"); + + if (datastr) + fpga_data = (void *)simple_strtoul(datastr, NULL, 16); + if (sizestr) + data_size = (size_t)simple_strtoul(sizestr, NULL, 16); + + return fpga_load(0, fpga_data, data_size); +} + +extern void pci_mpc5xxx_init(struct pci_controller *); + +void pci_init_board(void) +{ + char *s; + int load_fpga = 1; + + mvbc_p_init_fpga(); + s = getenv("skip_fpga"); + if (s) { + printf("found 'skip_fpga' -> FPGA _not_ loaded !\n"); + load_fpga = 0; + } + if (load_fpga) { + printf("loading FPGA ... "); + mvbc_p_load_fpga(); + printf("done\n"); + } + pci_mpc5xxx_init(&hose); +} + +u8 *dhcp_vendorex_prep(u8 *e) +{ + char *ptr; + + /* DHCP vendor-class-identifier = 60 */ + if ((ptr = getenv("dhcp_vendor-class-identifier"))) { + *e++ = 60; + *e++ = strlen(ptr); + while (*ptr) + *e++ = *ptr++; + } + /* DHCP_CLIENT_IDENTIFIER = 61 */ + if ((ptr = getenv("dhcp_client_id"))) { + *e++ = 61; + *e++ = strlen(ptr); + while (*ptr) + *e++ = *ptr++; + } + + return e; +} + +u8 *dhcp_vendorex_proc (u8 *popt) +{ + return NULL; +} + +void show_boot_progress(int val) +{ + struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio*)MPC5XXX_GPIO; + + switch(val) { + case 0: /* FPGA ok */ + setbits_be32(&gpio->simple_dvo, 0x80); + break; + case 1: + setbits_be32(&gpio->simple_dvo, 0x40); + break; + case 12: + setbits_be32(&gpio->simple_dvo, 0x20); + break; + case 15: + setbits_be32(&gpio->simple_dvo, 0x10); + break; + default: + break; + } + +} + +void ft_board_setup(void *blob, bd_t *bd) +{ + ft_cpu_setup(blob, bd); + fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); +} diff --git a/board/matrix_vision/mvbc_p/mvbc_p.h b/board/matrix_vision/mvbc_p/mvbc_p.h new file mode 100644 index 0000000000..33307981ea --- /dev/null +++ b/board/matrix_vision/mvbc_p/mvbc_p.h @@ -0,0 +1,43 @@ +#ifndef __MVBC_H__ +#define __MVBC_H__ + +#define LED_G0 MPC5XXX_GPIO_SIMPLE_PSC2_0 +#define LED_G1 MPC5XXX_GPIO_SIMPLE_PSC2_1 +#define LED_Y MPC5XXX_GPIO_SIMPLE_PSC2_2 +#define LED_R MPC5XXX_GPIO_SIMPLE_PSC2_3 +#define ARB_X_EN MPC5XXX_GPIO_WKUP_PSC2_4 + +#define FPGA_DIN MPC5XXX_GPIO_SIMPLE_PSC3_0 +#define FPGA_CCLK MPC5XXX_GPIO_SIMPLE_PSC3_1 +#define FPGA_CONF_DONE MPC5XXX_GPIO_SIMPLE_PSC3_2 +#define FPGA_CONFIG MPC5XXX_GPIO_SIMPLE_PSC3_3 +#define FPGA_STATUS MPC5XXX_GPIO_SINT_PSC3_4 + +#define MAN_RST MPC5XXX_GPIO_WKUP_PSC6_0 +#define WD_TS MPC5XXX_GPIO_WKUP_PSC6_1 +#define WD_WDI MPC5XXX_GPIO_SIMPLE_PSC6_2 +#define COP_PRESENT MPC5XXX_GPIO_SIMPLE_PSC6_3 +#define FACT_RST MPC5XXX_GPIO_WKUP_6 +#define FLASH_RBY MPC5XXX_GPIO_WKUP_7 + +#define SIMPLE_DDR (LED_G0 | LED_G1 | LED_Y | LED_R | \ + FPGA_DIN | FPGA_CCLK | FPGA_CONFIG | WD_WDI) +#define SIMPLE_DVO (FPGA_CONFIG) +#define SIMPLE_ODE (FPGA_CONFIG) +#define SIMPLE_GPIOEN (LED_G0 | LED_G1 | LED_Y | LED_R | \ + FPGA_DIN | FPGA_CCLK | FPGA_CONF_DONE | FPGA_CONFIG |\ + WD_WDI | COP_PRESENT) + +#define SINT_ODE 0 +#define SINT_DDR 0 +#define SINT_DVO 0 +#define SINT_INTEN 0 +#define SINT_ITYPE 0 +#define SINT_GPIOEN (FPGA_STATUS) + +#define WKUP_ODE (MAN_RST) +#define WKUP_DIR (ARB_X_EN|MAN_RST|WD_TS) +#define WKUP_DO (ARB_X_EN|MAN_RST|WD_TS) +#define WKUP_EN (ARB_X_EN|MAN_RST|WD_TS|FACT_RST|FLASH_RBY) + +#endif diff --git a/board/matrix_vision/mvbc_p/mvbc_p_autoscript b/board/matrix_vision/mvbc_p/mvbc_p_autoscript new file mode 100644 index 0000000000..5cee6c5b62 --- /dev/null +++ b/board/matrix_vision/mvbc_p/mvbc_p_autoscript @@ -0,0 +1,44 @@ +echo +echo "==== running autoscript ====" +echo +setenv bootdtb bootm \${kernel_boot} \${mv_initrd_addr_ram} \${mv_dtb_addr_ram} +setenv ramkernel setenv kernel_boot \${loadaddr} +setenv flashkernel setenv kernel_boot \${mv_kernel_addr} +setenv cpird cp \${mv_initrd_addr} \${mv_initrd_addr_ram} \${mv_initrd_length} +setenv bootfromflash run flashkernel cpird ramparam addcons e1000para bootdtb +setenv getdtb tftp \${mv_dtb_addr_ram} \${dtb_name} +setenv cpdtb cp \${mv_dtb_addr} \${mv_dtb_addr_ram} 0x2000 +setenv rundtb fdt addr \${mv_dtb_addr_ram}\;fdt boardsetup +setenv bootfromnet tftp \${mv_initrd_addr_ram} \${initrd_name}\;run ramkernel +if test ${console} = yes; +then +setenv addcons setenv bootargs \${bootargs} console=ttyPSC\${console_nr},\${baudrate}N8 +else +setenv addcons setenv bootargs \${bootargs} console=tty0 +fi +setenv e1000para setenv bootargs \${bootargs} e1000.TxDescriptors=1500 e1000.SmartPowerDownEnable=1 +setenv set_static_ip setenv ipaddr \${static_ipaddr} +setenv set_static_nm setenv netmask \${static_netmask} +setenv set_static_gw setenv gatewayip \${static_gateway} +setenv set_ip setenv ip \${ipaddr}::\${gatewayip}:\${netmask} +setenv ramparam setenv bootargs root=/dev/ram0 ro rootfstype=squashfs +if test ${autoscr_boot} != no; +then + if test ${netboot} = yes; + then + bootp + if test $? = 0; + then + echo "=== bootp succeeded -> netboot ===" + run set_ip + run getdtb rundtb bootfromnet ramparam addcons e1000para bootdtb + else + echo "=== netboot failed ===" + fi + fi + run set_static_ip set_static_nm set_static_gw set_ip + echo "=== bootfromflash ===" + run cpdtb rundtb bootfromflash +else + echo "=== boot stopped with autoscr_boot no ===" +fi diff --git a/board/mcc200/auto_update.c b/board/mcc200/auto_update.c index 5580c11887..2ed66ddb41 100644 --- a/board/mcc200/auto_update.c +++ b/board/mcc200/auto_update.c @@ -491,7 +491,7 @@ int do_auto_update(void) aufile[i], sz, image_get_header_size ()); if (sz != ausize[i]) { - printf ("%s: size %d read %d?\n", aufile[i], ausize[i], sz); + printf ("%s: size %ld read %ld?\n", aufile[i], ausize[i], sz); continue; } diff --git a/board/ml2/flash.c b/board/ml2/flash.c index 87cb1ff18e..ad0f0752bb 100644 --- a/board/ml2/flash.c +++ b/board/ml2/flash.c @@ -222,7 +222,7 @@ static int write_word (flash_info_t *info, ulong dest, unsigned long long data) unsigned long long result; int rc = ERR_OK; - result=*addr; + result = *addr; if ((result & data) != data) return ERR_NOT_ERASED; @@ -234,7 +234,7 @@ static int write_word (flash_info_t *info, ulong dest, unsigned long long data) eieio(); do { - result=*addr; + result = *addr; } while(~result & BIT_BUSY); *addr=CMD_READ_ARRAY; @@ -275,7 +275,7 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) { } while(cnt>=8) { - data=*((unsigned long long *)src); + data = *((unsigned long long *)src); if ((rc = write_word(info, wp, data)) != 0) return rc; src+=8; diff --git a/board/mp2usb/flash.c b/board/mp2usb/flash.c index 89ced163bb..c19d445e20 100644 --- a/board/mp2usb/flash.c +++ b/board/mp2usb/flash.c @@ -426,7 +426,7 @@ static int write_data (flash_info_t *info, ulong dest, FPW data) /* Check if Flash is (sufficiently) erased */ if ((*addr & data) != data) { - printf ("not erased at %08lx (%lx)\n", (ulong) addr, *addr); + printf ("not erased at %08lx (%lx)\n", (ulong) addr, (ulong) *addr); return (2); } /* diff --git a/board/mpc8540eval/flash.c b/board/mpc8540eval/flash.c index 7300a041a2..79eb04ca87 100644 --- a/board/mpc8540eval/flash.c +++ b/board/mpc8540eval/flash.c @@ -591,7 +591,7 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) cnt -= FLASH_BLOCK_SIZE; if (((count-cnt)>>10)>temp) { temp=(count-cnt)>>10; - printf("\r%d KB",temp); + printf("\r%lu KB",temp); } } printf("\n"); @@ -699,7 +699,8 @@ static int write_block(flash_info_t *info, uchar * src, ulong dest, ulong cnt) } } if (csr & 0x4040) { - printf ("CSR indicates write error (%04x) at %08lx\n", csr, (ulong)addr); + printf ("CSR indicates write error (%04lx) at %08lx\n", + csr, (ulong)addr); flag = 1; } /* Clear Status Registers Command */ @@ -756,7 +757,8 @@ static int write_short (flash_info_t *info, ulong dest, ushort data) } } if (csr & 0x4040) { - printf ("CSR indicates write error (%04x) at %08lx\n", csr, (ulong)addr); + printf ("CSR indicates write error (%04lx) at %08lx\n", + csr, (ulong)addr); flag = 1; } /* Clear Status Registers Command */ diff --git a/board/mpl/common/common_util.c b/board/mpl/common/common_util.c index 11d4345125..24ce807857 100644 --- a/board/mpl/common/common_util.c +++ b/board/mpl/common/common_util.c @@ -357,8 +357,8 @@ void copy_old_env(ulong size) unsigned off; uchar *name, *value; - name=&name_buf[0]; - value=&value_buf[0]; + name = &name_buf[0]; + value = &value_buf[0]; len=size; off = sizeof(long); while (len > off) { @@ -377,8 +377,8 @@ void copy_old_env(ulong size) if(c == '\0') break; } while(len > off); - name=&name_buf[0]; - value=&value_buf[0]; + name = &name_buf[0]; + value = &value_buf[0]; if(strncmp((char *)name,"baudrate",8)!=0) { setenv((char *)name,(char *)value); } @@ -636,12 +636,12 @@ void video_get_info_str (int line_number, char *info) ++s; break; } - buf[i++]=*s; + buf[i++] = *s; } sprintf(&buf[i]," SN "); i+=4; for (; s < e; ++s) { - buf[i++]=*s; + buf[i++] = *s; } buf[i++]=0; } diff --git a/board/mpl/common/flash.c b/board/mpl/common/flash.c index a437dab1c6..eb2702b6df 100644 --- a/board/mpl/common/flash.c +++ b/board/mpl/common/flash.c @@ -160,7 +160,7 @@ unsigned long flash_init (void) unsigned long size_b1,flashcr,size_reg; int mode; extern char version_string; - char *p=&version_string; + char *p = &version_string; /* Since we are relocated, we can set-up the CS finally */ setup_cs_reloc(); diff --git a/board/mpl/common/kbd.c b/board/mpl/common/kbd.c index 931ed43083..b20b9532b1 100644 --- a/board/mpl/common/kbd.c +++ b/board/mpl/common/kbd.c @@ -475,7 +475,7 @@ int kbd_read_data(void) int val; unsigned char status; - val=-1; + val = -1; status = kbd_read_status(); if (status & KBD_STAT_OBF) { val = kbd_read_input(); diff --git a/board/mpl/common/usb_uhci.c b/board/mpl/common/usb_uhci.c index 6778e4098c..666b999e37 100644 --- a/board/mpl/common/usb_uhci.c +++ b/board/mpl/common/usb_uhci.c @@ -536,7 +536,7 @@ void usb_check_int_chain(void) uhci_td_t *td,*prevtd; for(i=0;i<8;i++) { - prevtd=&td_int[i]; /* the first previous td is the skeleton td */ + prevtd = &td_int[i]; /* the first previous td is the skeleton td */ link=swap_32(td_int[i].link) & 0xfffffff0; /* next in chain */ td=(uhci_td_t *)link; /* assign it */ /* all interrupt TDs are finally linked to the td_int[0]. @@ -638,7 +638,7 @@ int usb_lowlevel_stop(void) return 1; irq_free_handler(irqvec); reset_hc(); - irqvec=-1; + irqvec = -1; return 0; } diff --git a/board/netstal/common/nm_bsp.c b/board/netstal/common/nm_bsp.c index 86f491b34e..e38b7069ce 100644 --- a/board/netstal/common/nm_bsp.c +++ b/board/netstal/common/nm_bsp.c @@ -75,8 +75,8 @@ void set_params_for_sw_install(int install_requested, char *board_name ) setenv("install", string); sprintf(string, "setenv bootargs emac(0,0)c:%s/%s_sw_inst " "e=${ipaddr} h=${serverip} f=0x1000; " - "bootvx ${loadaddr}\0", - board_name, board_name); + "bootvx ${loadaddr}%c", + board_name, board_name, 0); setenv("boot_sw_inst", string); } } @@ -108,10 +108,12 @@ void common_misc_init_r(void) gd->bd->bi_enetaddr[3] = (serial >> 16) & 0xff; gd->bd->bi_enetaddr[4] = (serial >> 8) & 0xff; gd->bd->bi_enetaddr[5] = hcu_get_slot(); - sprintf(ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X\0", + sprintf(ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X%c", gd->bd->bi_enetaddr[0], gd->bd->bi_enetaddr[1], gd->bd->bi_enetaddr[2], gd->bd->bi_enetaddr[3], - gd->bd->bi_enetaddr[4], gd->bd->bi_enetaddr[5]) ; + gd->bd->bi_enetaddr[4], + gd->bd->bi_enetaddr[5], + 0) ; printf("%s: Setting eth %s serial 0x%x\n", __FUNCTION__, ethaddr, serial); setenv(DEFAULT_ETH_ADDR, ethaddr); diff --git a/board/netstal/hcu5/sdram.c b/board/netstal/hcu5/sdram.c index 80e84aebb8..66a958c78a 100644 --- a/board/netstal/hcu5/sdram.c +++ b/board/netstal/hcu5/sdram.c @@ -71,7 +71,7 @@ void board_add_ram_info(int use_default) } get_sys_info(&board_cfg); - printf(", %d MHz", (board_cfg.freqPLB * 2) / 1000000); + printf(", %lu MHz", (board_cfg.freqPLB * 2) / 1000000); mfsdram(DDR0_03, val); val = DDR0_03_CASLAT_DECODE(val); diff --git a/board/o2dnt/flash.c b/board/o2dnt/flash.c index 037d28732d..349086ffb5 100644 --- a/board/o2dnt/flash.c +++ b/board/o2dnt/flash.c @@ -411,7 +411,7 @@ static int write_data (flash_info_t *info, FPWV *dest, FPW data) /* Check if Flash is (sufficiently) erased */ if ((*addr & data) != data) { - printf ("not erased at %08lx (%lx)\n", (ulong) addr, *addr); + printf ("not erased at %08lx (%x)\n", (ulong) addr, *addr); return (2); } /* Disable interrupts which might cause a timeout here */ diff --git a/board/prodrive/alpr/alpr.c b/board/prodrive/alpr/alpr.c index 8d60936881..131a62dd64 100644 --- a/board/prodrive/alpr/alpr.c +++ b/board/prodrive/alpr/alpr.c @@ -287,24 +287,3 @@ int post_hotkeys_pressed(void) return (ctrlc()); } #endif - -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) -{ - u32 val[4]; - int rc; - - ft_cpu_setup(blob, bd); - - /* Fixup NOR mapping */ - val[0] = 0; /* chip select number */ - val[1] = 0; /* always 0 */ - val[2] = gd->bd->bi_flashstart; - val[3] = gd->bd->bi_flashsize; - rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges", - val, sizeof(val), 1); - if (rc) - printf("Unable to update property NOR mapping, err=%s\n", - fdt_strerror(rc)); -} -#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/sandburst/metrobox/metrobox.c b/board/sandburst/metrobox/metrobox.c index 86d259fac4..66cdfb1562 100644 --- a/board/sandburst/metrobox/metrobox.c +++ b/board/sandburst/metrobox/metrobox.c @@ -270,7 +270,7 @@ int checkboard (void) } printf ("OptoFPGA ID:\t0x%02X\tRev: 0x%02X\n", opto_id, opto_rev); - printf ("Board Rev:\t0x%02X\tID: %s\n", brd_rev, board_id_as[brd_id]); + printf ("Board Rev:\t0x%02X\tID: %s\n", brd_rev, board_id_as[brd_id].name); /* Fix the ack in the bme 32 */ udelay(5000); diff --git a/board/sbc8560/sbc8560.c b/board/sbc8560/sbc8560.c index 2946ca1055..d9e598c299 100644 --- a/board/sbc8560/sbc8560.c +++ b/board/sbc8560/sbc8560.c @@ -33,6 +33,8 @@ #include <ioports.h> #include <spd_sdram.h> #include <miiphy.h> +#include <libfdt.h> +#include <fdt_support.h> long int fixed_sdram (void); @@ -421,7 +423,11 @@ long int fixed_sdram (void) #ifndef CFG_RAMBOOT volatile ccsr_ddr_t *ddr= (void *)(CFG_MPC85xx_DDR_ADDR); +#if (CFG_SDRAM_SIZE == 512) + ddr->cs0_bnds = 0x0000000f; +#else ddr->cs0_bnds = 0x00000007; +#endif ddr->cs1_bnds = 0x0010001f; ddr->cs2_bnds = 0x00000000; ddr->cs3_bnds = 0x00000000; @@ -452,3 +458,29 @@ long int fixed_sdram (void) return CFG_SDRAM_SIZE * 1024 * 1024; } #endif /* !defined(CONFIG_SPD_EEPROM) */ + + +#if defined(CONFIG_OF_BOARD_SETUP) +void +ft_board_setup(void *blob, bd_t *bd) +{ + int node, tmp[2]; +#ifdef CONFIG_PCI + const char *path; +#endif + + ft_cpu_setup(blob, bd); + + node = fdt_path_offset(blob, "/aliases"); + tmp[0] = 0; + if (node >= 0) { +#ifdef CONFIG_PCI + path = fdt_getprop(blob, node, "pci0", NULL); + if (path) { + tmp[1] = hose.last_busno - hose.first_busno; + do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); + } +#endif + } +} +#endif diff --git a/board/snmc/qs850/qs850.c b/board/snmc/qs850/qs850.c index ba5a8fb0a1..2fbe8aeb51 100644 --- a/board/snmc/qs850/qs850.c +++ b/board/snmc/qs850/qs850.c @@ -86,6 +86,13 @@ const uint sdram_table[] = * * Always return 1 */ +#if defined(CONFIG_QS850) +#define BOARD_IDENTITY "QS850" +#elif defined(CONFIG_QS823) +#define BOARD_IDENTITY "QS823" +#else +#define BOARD_IDENTITY "QS???" +#endif int checkboard (void) { @@ -96,14 +103,8 @@ int checkboard (void) i = getenv_r("serial#", buf, sizeof(buf)); s = (i>0) ? buf : NULL; -#ifdef CONFIG_QS850 - if (!s || strncmp(s, "QS850", 5)) { - puts ("### No HW ID - assuming QS850"); -#endif -#ifdef CONFIG_QS823 - if (!s || strncmp(s, "QS823", 5)) { - puts ("### No HW ID - assuming QS823"); -#endif + if (!s || strncmp(s, BOARD_IDENTITY, 5)) { + puts ("### No HW ID - assuming " BOARD_IDENTITY); } else { for (e=s; *e; ++e) { if (*e == ' ') diff --git a/board/spc1920/hpi.c b/board/spc1920/hpi.c index cd7799b277..cf21b215b7 100644 --- a/board/spc1920/hpi.c +++ b/board/spc1920/hpi.c @@ -234,7 +234,8 @@ static int hpi_write_inc(u32 addr, u32 *data, u32 count) HPI_HPIA_1 = addr1; HPI_HPIA_2 = addr2; - debugX(4, "writing from data=0x%x to 0x%x\n", data, (data+count)); + debugX(4, "writing from data=0x%lx to 0x%lx\n", + (ulong)data, (ulong)(data+count)); for(i=0; i<count; i++) { HPI_HPID_INC_1 = (u16) ((data[i] >> 16) & 0xffff); diff --git a/board/total5200/total5200.c b/board/total5200/total5200.c index 868ebd5f54..1ae24c4f3a 100644 --- a/board/total5200/total5200.c +++ b/board/total5200/total5200.c @@ -67,14 +67,14 @@ int checkboard (void) puts ("Board: Total5100 "); #endif -/* - * Retrieve FPGA Revision. - */ -printf ("(FPGA %08X)\n", *(vu_long *) (CFG_FPGA_BASE + 0x400)); + /* + * Retrieve FPGA Revision. + */ + printf ("(FPGA %08lX)\n", *(vu_long *) (CFG_FPGA_BASE + 0x400)); -/* - * Take all peripherals in power-up mode. - */ + /* + * Take all peripherals in power-up mode. + */ #if CONFIG_TOTAL5200_REV==2 *(vu_char *) (CFG_CPLD_BASE + 0x46) = 0x70; #else diff --git a/board/tqc/tqm5200/cmd_stk52xx.c b/board/tqc/tqm5200/cmd_stk52xx.c index 7472ca9e97..fd1e68bbb5 100644 --- a/board/tqc/tqm5200/cmd_stk52xx.c +++ b/board/tqc/tqm5200/cmd_stk52xx.c @@ -192,10 +192,10 @@ static int i2s_play_wave(unsigned long addr, unsigned long len) psc->command = (PSC_RX_ENABLE | PSC_TX_ENABLE); for(i = 0;i < (len / 4); i++) { - swapped[3]=*wave_file++; - swapped[2]=*wave_file++; - swapped[1]=*wave_file++; - swapped[0]=*wave_file++; + swapped[3] = *wave_file++; + swapped[2] = *wave_file++; + swapped[1] = *wave_file++; + swapped[0] = *wave_file++; psc->psc_buffer_32 = *((unsigned long*)swapped); while (psc->tfnum > 400) { if(ctrlc()) @@ -478,7 +478,7 @@ static int cmd_wav(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } set_attenuation(volume); - printf("Play wave file at %#p with length %#x\n", addr, length); + printf("Play wave file at %lX with length %lX\n", addr, length); rcode = i2s_play_wave(addr, length); return rcode; diff --git a/board/tqc/tqm8272/tqm8272.c b/board/tqc/tqm8272/tqm8272.c index 29099f5ed1..cde02961be 100644 --- a/board/tqc/tqm8272/tqm8272.c +++ b/board/tqc/tqm8272/tqm8272.c @@ -652,7 +652,7 @@ static int dump_hwib(void) printf ("ethaddr: %s\n", hw->ethaddr); printf ("FLASH : %x nr:%d\n", hw->flash, hw->flash_nr); printf ("RAM : %x cs:%d\n", hw->ram, hw->ram_cs); - printf ("CPU : %d\n", hw->cpunr); + printf ("CPU : %lu\n", hw->cpunr); printf ("CAN : %d\n", hw->can); if (hw->eeprom) printf ("EEprom : %x\n", hw->eeprom); else printf ("No EEprom\n"); @@ -663,7 +663,7 @@ static int dump_hwib(void) printf ("Bus %s mode.\n", (hw->Bus ? "60x" : "Single PQII")); printf (" real : %s\n", (immr->im_siu_conf.sc_bcr & BCR_EBM ? \ "60x" : "Single PQII")); - printf ("Option : %x\n", hw->option); + printf ("Option : %lx\n", hw->option); printf ("%s Security Engine\n", (hw->SecEng ? "with" : "no")); printf ("CPM Clk: %d\n", hw->cpmcl); printf ("CPU Clk: %d\n", hw->cpucl); diff --git a/board/tqc/tqm85xx/tqm85xx.c b/board/tqc/tqm85xx/tqm85xx.c index f1c2e58edd..839d47da69 100644 --- a/board/tqc/tqm85xx/tqm85xx.c +++ b/board/tqc/tqm85xx/tqm85xx.c @@ -464,7 +464,8 @@ void local_bus_init (void) if (lbc_mhz < 66) { lbc->lcrr = CFG_LBC_LCRR | LCRR_DBYP; /* DLL Bypass */ - lbc->ltedr = 0xa4c80000; /* DK: !!! */ + lbc->ltedr = LTEDR_BMD | LTEDR_PARD | LTEDR_WPD | LTERD_WARA | + LTEDR_RAWA | LTEDR_CSD; /* Disable all error checking */ } else if (lbc_mhz >= 133) { lbc->lcrr = CFG_LBC_LCRR & (~LCRR_DBYP); /* DLL Enabled */ diff --git a/board/versatile/flash.c b/board/versatile/flash.c index ca77c8a29e..bbe5df724d 100644 --- a/board/versatile/flash.c +++ b/board/versatile/flash.c @@ -476,7 +476,7 @@ static int write_data (flash_info_t * info, ulong dest, FPW data) /* Check if Flash is (sufficiently) erased */ if ((*addr & data) != data) { - printf ("not erased at %08lx (%x)\n", (ulong) addr, *addr); + printf ("not erased at %08lx (%lx)\n", (ulong) addr, (ulong) *addr); return (2); } diff --git a/board/zylonite/nand.c b/board/zylonite/nand.c index aa3932ad2d..ca16578432 100644 --- a/board/zylonite/nand.c +++ b/board/zylonite/nand.c @@ -254,7 +254,7 @@ static unsigned long dfc_wait_event(unsigned long event) break; } if(get_delta(start) > timeout) { - DFC_DEBUG1("dfc_wait_event: TIMEOUT waiting for event: 0x%x.\n", event); + DFC_DEBUG1("dfc_wait_event: TIMEOUT waiting for event: 0x%lx.\n", event); return 0xff000000; } diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c index caa467d026..24ff9b9956 100644 --- a/common/cmd_bdinfo.c +++ b/common/cmd_bdinfo.c @@ -205,7 +205,7 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) puts ("\nip_addr = "); print_IPaddr (bd->bi_ip_addr); #endif - printf ("\nbaudrate = %d bps\n", (ulong)bd->bi_baudrate); + printf ("\nbaudrate = %ld bps\n", (ulong)bd->bi_baudrate); return 0; } diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c index f701ab6f7c..1c0a4161d0 100644 --- a/common/cmd_bootm.c +++ b/common/cmd_bootm.c @@ -36,6 +36,10 @@ #include <lmb.h> #include <asm/byteorder.h> +#if (CONFIG_COMMANDS & CFG_CMD_USB) +#include <usb.h> +#endif + #ifdef CFG_HUSH_PARSER #include <hush.h> #endif @@ -213,6 +217,20 @@ int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) */ iflag = disable_interrupts(); +#if (CONFIG_COMMANDS & CFG_CMD_USB) + /* + * turn off USB to prevent the host controller from writing to the + * SDRAM while Linux is booting. This could happen (at least for OHCI + * controller), because the HCCA (Host Controller Communication Area) + * lies within the SDRAM and the host controller writes continously to + * this area (as busmaster!). The HccaFrameNumber is for example + * updated every 1 ms within the HCCA structure in SDRAM! For more + * details see the OpenHCI specification. + */ + usb_stop(); +#endif + + #ifdef CONFIG_AMIGAONEG3SE /* * We've possible left the caches enabled during diff --git a/common/cmd_fdc.c b/common/cmd_fdc.c index e4fbf29a22..8493defe93 100644 --- a/common/cmd_fdc.c +++ b/common/cmd_fdc.c @@ -512,7 +512,7 @@ int fdc_read_data(unsigned char *buffer, unsigned long blocks,FDC_COMMAND_STRUCT if(readblk>blocks) /* is end within 1st track */ readblk=blocks; /* yes, correct it */ PRINTF("we read %ld blocks start %ld\n",readblk,pCMD->blnr); - bufferw=&buffer[0]; /* setup working buffer */ + bufferw = &buffer[0]; /* setup working buffer */ do { retryrw: len=sect_size * readblk; @@ -566,7 +566,7 @@ retryrw: * we need to get the results */ fdc_terminate(pCMD); offset+=(sect_size*readblk); /* set up buffer pointer */ - bufferw=&buffer[offset]; + bufferw = &buffer[offset]; pCMD->blnr+=readblk; /* update current block nr */ blocks-=readblk; /* update blocks */ if(blocks==0) diff --git a/common/cmd_flash.c b/common/cmd_flash.c index db5dec9049..a7f66ddbfa 100644 --- a/common/cmd_flash.c +++ b/common/cmd_flash.c @@ -210,7 +210,7 @@ flash_fill_sect_ranges (ulong addr_first, ulong addr_last, s_last [bank] = -1; /* last sector to erase */ } - for (bank=0,info=&flash_info[0]; + for (bank=0,info = &flash_info[0]; (bank < CFG_MAX_FLASH_BANKS) && (addr_first <= addr_last); ++bank, ++info) { ulong b_end; @@ -360,7 +360,7 @@ int do_flerase (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) addr_last = addr_first + part->size - 1; printf ("Erase Flash Parition %s, " - "bank %d, 0x%08lx - 0x%08lx ", + "bank %ld, 0x%08lx - 0x%08lx ", argv[1], bank, addr_first, addr_last); @@ -427,7 +427,7 @@ int flash_sect_erase (ulong addr_first, ulong addr_last) s_first, s_last, &planned ); if (planned && (rcode == 0)) { - for (bank=0,info=&flash_info[0]; + for (bank=0,info = &flash_info[0]; (bank < CFG_MAX_FLASH_BANKS) && (rcode == 0); ++bank, ++info) { if (s_first[bank]>=0) { @@ -566,7 +566,7 @@ int do_protect (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) addr_last = addr_first + part->size - 1; printf ("%sProtect Flash Parition %s, " - "bank %d, 0x%08lx - 0x%08lx\n", + "bank %ld, 0x%08lx - 0x%08lx\n", p ? "" : "Un", argv[1], bank, addr_first, addr_last); @@ -651,7 +651,7 @@ int flash_sect_protect (int p, ulong addr_first, ulong addr_last) protected = 0; if (planned && (rcode == 0)) { - for (bank=0,info=&flash_info[0]; bank < CFG_MAX_FLASH_BANKS; ++bank, ++info) { + for (bank=0,info = &flash_info[0]; bank < CFG_MAX_FLASH_BANKS; ++bank, ++info) { if (info->flash_id == FLASH_UNKNOWN) { continue; } diff --git a/common/cmd_fpga.c b/common/cmd_fpga.c index 9141dcce92..dcbbc993dd 100644 --- a/common/cmd_fpga.c +++ b/common/cmd_fpga.c @@ -85,7 +85,7 @@ int fpga_loadbitstream(unsigned long dev, char* fpgadata, size_t size) length = (*dataptr << 8) + *(dataptr+1); dataptr+=2; for(i=0;i<length;i++) - buffer[i]=*dataptr++; + buffer[i] = *dataptr++; printf(" design filename = \"%s\"\n", buffer); @@ -99,7 +99,7 @@ int fpga_loadbitstream(unsigned long dev, char* fpgadata, size_t size) length = (*dataptr << 8) + *(dataptr+1); dataptr+=2; for(i=0;i<length;i++) - buffer[i]=*dataptr++; + buffer[i] = *dataptr++; printf(" part number = \"%s\"\n", buffer); /* get date (identifier, length, string) */ @@ -112,7 +112,7 @@ int fpga_loadbitstream(unsigned long dev, char* fpgadata, size_t size) length = (*dataptr << 8) + *(dataptr+1); dataptr+=2; for(i=0;i<length;i++) - buffer[i]=*dataptr++; + buffer[i] = *dataptr++; printf(" date = \"%s\"\n", buffer); /* get time (identifier, length, string) */ @@ -124,7 +124,7 @@ int fpga_loadbitstream(unsigned long dev, char* fpgadata, size_t size) length = (*dataptr << 8) + *(dataptr+1); dataptr+=2; for(i=0;i<length;i++) - buffer[i]=*dataptr++; + buffer[i] = *dataptr++; printf(" time = \"%s\"\n", buffer); /* get fpga data length (identifier, length) */ diff --git a/common/cmd_ide.c b/common/cmd_ide.c index 97a873d1c9..56db433024 100644 --- a/common/cmd_ide.c +++ b/common/cmd_ide.c @@ -298,7 +298,7 @@ int do_ide (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) ulong addr = simple_strtoul(argv[2], NULL, 16); ulong cnt = simple_strtoul(argv[4], NULL, 16); ulong n; -#ifdef CFG_64BIT_STRTOUL +#ifdef CFG_64BIT_LBA lbaint_t blk = simple_strtoull(argv[3], NULL, 16); printf ("\nIDE read: device %d block # %qd, count %ld ... ", @@ -327,7 +327,7 @@ int do_ide (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) ulong addr = simple_strtoul(argv[2], NULL, 16); ulong cnt = simple_strtoul(argv[4], NULL, 16); ulong n; -#ifdef CFG_64BIT_STRTOUL +#ifdef CFG_64BIT_LBA lbaint_t blk = simple_strtoull(argv[3], NULL, 16); printf ("\nIDE write: device %d block # %qd, count %ld ... ", diff --git a/common/cmd_jffs2.c b/common/cmd_jffs2.c index 1b67e73f11..b4698bee47 100644 --- a/common/cmd_jffs2.c +++ b/common/cmd_jffs2.c @@ -241,13 +241,13 @@ static void memsize_format(char *buf, u32 size) #define SIZE_KB ((u32)1024) if ((size % SIZE_GB) == 0) - sprintf(buf, "%lug", size/SIZE_GB); + sprintf(buf, "%ug", size/SIZE_GB); else if ((size % SIZE_MB) == 0) - sprintf(buf, "%lum", size/SIZE_MB); + sprintf(buf, "%um", size/SIZE_MB); else if (size % SIZE_KB == 0) - sprintf(buf, "%luk", size/SIZE_KB); + sprintf(buf, "%uk", size/SIZE_KB); else - sprintf(buf, "%lu", size); + sprintf(buf, "%u", size); } /** @@ -416,7 +416,7 @@ static int part_validate(struct mtdids *id, struct part_info *part) part->size = id->size - part->offset; if (part->offset > id->size) { - printf("%s: offset %08lx beyond flash size %08lx\n", + printf("%s: offset %08x beyond flash size %08x\n", id->mtd_id, part->offset, id->size); return 1; } @@ -1288,7 +1288,7 @@ static void list_partitions(void) if (current_dev) { part = jffs2_part_info(current_dev, current_partnum); if (part) { - printf("\nactive partition: %s%d,%d - (%s) 0x%08lx @ 0x%08lx\n", + printf("\nactive partition: %s%d,%d - (%s) 0x%08x @ 0x%08x\n", MTD_DEV_TYPE(current_dev->id->type), current_dev->id->num, current_partnum, part->name, part->size, part->offset); diff --git a/common/cmd_mfsl.c b/common/cmd_mfsl.c index 5982b76e6e..c2442eed13 100644 --- a/common/cmd_mfsl.c +++ b/common/cmd_mfsl.c @@ -183,7 +183,7 @@ int do_frd (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) return 1; } - printf ("%01x: 0x%08lx - %s %s read\n", fslnum, num, + printf ("%01x: 0x%08x - %s %s read\n", fslnum, num, blocking < 2 ? "non blocking" : "blocking", ((blocking == 1) || (blocking == 3)) ? "control" : "data" ); return 0; @@ -341,7 +341,7 @@ int do_fwr (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) return 1; } - printf ("%01x: 0x%08lx - %s %s write\n", fslnum, num, + printf ("%01x: 0x%08x - %s %s write\n", fslnum, num, blocking < 2 ? "non blocking" : "blocking", ((blocking == 1) || (blocking == 3)) ? "control" : "data" ); return 0; @@ -382,7 +382,7 @@ int do_rspr (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) puts ("Unsupported register\n"); return 1; } - printf (": 0x%08lx\n", val); + printf (": 0x%08x\n", val); return 0; } diff --git a/common/cmd_mp.c b/common/cmd_mp.c index 26a57c5e96..b2a397cdfb 100644 --- a/common/cmd_mp.c +++ b/common/cmd_mp.c @@ -35,7 +35,7 @@ cpu_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) cpuid = simple_strtoul(argv[1], NULL, 10); if (cpuid >= CONFIG_NR_CPUS) { - printf ("Core num: %d is out of range[0..%d]\n", + printf ("Core num: %lu is out of range[0..%d]\n", cpuid, CONFIG_NR_CPUS - 1); return 1; } diff --git a/common/cmd_nand.c b/common/cmd_nand.c index cc7c5ba241..9e38bf768f 100644 --- a/common/cmd_nand.c +++ b/common/cmd_nand.c @@ -886,9 +886,9 @@ int do_nand (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) return 1; } - printf ("\nNAND %s: device %d offset %ld, size %ld ...\n", + printf ("\nNAND %s: device %d offset %ld, size %lu ...\n", (cmd & NANDRW_READ) ? "read" : "write", - curr_device, off, size); + curr_device, off, (ulong)size); ret = nand_legacy_rw (nand_dev_desc + curr_device, cmd, off, size, diff --git a/common/cmd_nvedit.c b/common/cmd_nvedit.c index 85a0f94f0f..70897062a6 100644 --- a/common/cmd_nvedit.c +++ b/common/cmd_nvedit.c @@ -99,7 +99,8 @@ int do_printenv (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } } - printf("\nEnvironment size: %d/%d bytes\n", i, ENV_SIZE); + printf("\nEnvironment size: %d/%ld bytes\n", + i, (ulong)ENV_SIZE); return 0; } diff --git a/common/cmd_onenand.c b/common/cmd_onenand.c index aff11d15c9..ce99a38ca5 100644 --- a/common/cmd_onenand.c +++ b/common/cmd_onenand.c @@ -70,14 +70,14 @@ int do_onenand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) if (!end || end < 0) end = start; - printf("Erase block from %d to %d\n", start, end); + printf("Erase block from %lu to %lu\n", start, end); for (block = start; block <= end; block++) { instr.addr = block << onenand_chip.erase_shift; instr.len = 1 << onenand_chip.erase_shift; ret = onenand_erase(&onenand_mtd, &instr); if (ret) { - printf("erase failed %d\n", block); + printf("erase failed %lu\n", block); break; } } diff --git a/common/cmd_reginfo.c b/common/cmd_reginfo.c index 1669d74962..0657e4b1f1 100644 --- a/common/cmd_reginfo.c +++ b/common/cmd_reginfo.c @@ -282,54 +282,54 @@ int do_reginfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) puts ("\nMPC5200 registers\n"); printf ("MBAR=%08x\n", CFG_MBAR); puts ("Memory map registers\n"); - printf ("\tCS0: start %08X\tstop %08X\tconfig %08X\ten %d\n", + printf ("\tCS0: start %08lX\tstop %08lX\tconfig %08lX\ten %d\n", *(volatile ulong*)MPC5XXX_CS0_START, *(volatile ulong*)MPC5XXX_CS0_STOP, *(volatile ulong*)MPC5XXX_CS0_CFG, (*(volatile ulong*)MPC5XXX_ADDECR & 0x00010000) ? 1 : 0); - printf ("\tCS1: start %08X\tstop %08X\tconfig %08X\ten %d\n", + printf ("\tCS1: start %08lX\tstop %08lX\tconfig %08lX\ten %d\n", *(volatile ulong*)MPC5XXX_CS1_START, *(volatile ulong*)MPC5XXX_CS1_STOP, *(volatile ulong*)MPC5XXX_CS1_CFG, (*(volatile ulong*)MPC5XXX_ADDECR & 0x00020000) ? 1 : 0); - printf ("\tCS2: start %08X\tstop %08X\tconfig %08X\ten %d\n", + printf ("\tCS2: start %08lX\tstop %08lX\tconfig %08lX\ten %d\n", *(volatile ulong*)MPC5XXX_CS2_START, *(volatile ulong*)MPC5XXX_CS2_STOP, *(volatile ulong*)MPC5XXX_CS2_CFG, (*(volatile ulong*)MPC5XXX_ADDECR & 0x00040000) ? 1 : 0); - printf ("\tCS3: start %08X\tstop %08X\tconfig %08X\ten %d\n", + printf ("\tCS3: start %08lX\tstop %08lX\tconfig %08lX\ten %d\n", *(volatile ulong*)MPC5XXX_CS3_START, *(volatile ulong*)MPC5XXX_CS3_STOP, *(volatile ulong*)MPC5XXX_CS3_CFG, (*(volatile ulong*)MPC5XXX_ADDECR & 0x00080000) ? 1 : 0); - printf ("\tCS4: start %08X\tstop %08X\tconfig %08X\ten %d\n", + printf ("\tCS4: start %08lX\tstop %08lX\tconfig %08lX\ten %d\n", *(volatile ulong*)MPC5XXX_CS4_START, *(volatile ulong*)MPC5XXX_CS4_STOP, *(volatile ulong*)MPC5XXX_CS4_CFG, (*(volatile ulong*)MPC5XXX_ADDECR & 0x00100000) ? 1 : 0); - printf ("\tCS5: start %08X\tstop %08X\tconfig %08X\ten %d\n", + printf ("\tCS5: start %08lX\tstop %08lX\tconfig %08lX\ten %d\n", *(volatile ulong*)MPC5XXX_CS5_START, *(volatile ulong*)MPC5XXX_CS5_STOP, *(volatile ulong*)MPC5XXX_CS5_CFG, (*(volatile ulong*)MPC5XXX_ADDECR & 0x00200000) ? 1 : 0); - printf ("\tCS6: start %08X\tstop %08X\tconfig %08X\ten %d\n", + printf ("\tCS6: start %08lX\tstop %08lX\tconfig %08lX\ten %d\n", *(volatile ulong*)MPC5XXX_CS6_START, *(volatile ulong*)MPC5XXX_CS6_STOP, *(volatile ulong*)MPC5XXX_CS6_CFG, (*(volatile ulong*)MPC5XXX_ADDECR & 0x04000000) ? 1 : 0); - printf ("\tCS7: start %08X\tstop %08X\tconfig %08X\ten %d\n", + printf ("\tCS7: start %08lX\tstop %08lX\tconfig %08lX\ten %d\n", *(volatile ulong*)MPC5XXX_CS7_START, *(volatile ulong*)MPC5XXX_CS7_STOP, *(volatile ulong*)MPC5XXX_CS7_CFG, (*(volatile ulong*)MPC5XXX_ADDECR & 0x08000000) ? 1 : 0); - printf ("\tBOOTCS: start %08X\tstop %08X\tconfig %08X\ten %d\n", + printf ("\tBOOTCS: start %08lX\tstop %08lX\tconfig %08lX\ten %d\n", *(volatile ulong*)MPC5XXX_BOOTCS_START, *(volatile ulong*)MPC5XXX_BOOTCS_STOP, *(volatile ulong*)MPC5XXX_BOOTCS_CFG, (*(volatile ulong*)MPC5XXX_ADDECR & 0x02000000) ? 1 : 0); - printf ("\tSDRAMCS0: %08X\n", + printf ("\tSDRAMCS0: %08lX\n", *(volatile ulong*)MPC5XXX_SDRAM_CS0CFG); - printf ("\tSDRAMCS1: %08X\n", + printf ("\tSDRAMCS1: %08lX\n", *(volatile ulong*)MPC5XXX_SDRAM_CS1CFG); #elif defined(CONFIG_MPC86xx) mpc86xx_reginfo(); diff --git a/common/cmd_scsi.c b/common/cmd_scsi.c index e648f7d601..f3574650ce 100644 --- a/common/cmd_scsi.c +++ b/common/cmd_scsi.c @@ -171,7 +171,7 @@ removable: if(scsi_max_devs>0) scsi_curr_dev=0; else - scsi_curr_dev=-1; + scsi_curr_dev = -1; } diff --git a/common/cmd_usb.c b/common/cmd_usb.c index 30caa98ea7..c62ca9769c 100644 --- a/common/cmd_usb.c +++ b/common/cmd_usb.c @@ -32,7 +32,7 @@ #include <usb.h> #ifdef CONFIG_USB_STORAGE -static int usb_stor_curr_dev=-1; /* current device */ +static int usb_stor_curr_dev = -1; /* current device */ #endif /* some display routines (info command) */ diff --git a/common/devices.c b/common/devices.c index ddf8f8ee2d..9cc963ac20 100644 --- a/common/devices.c +++ b/common/devices.c @@ -125,7 +125,7 @@ int device_deregister(char *devname) device_t *dev = NULL; char temp_names[3][8]; - dev_index=-1; + dev_index = -1; for (i=1; i<=ListNumItems(devlist); i++) { dev = ListGetPtrToItem (devlist, i); if(strcmp(dev->name,devname)==0) { diff --git a/common/env_onenand.c b/common/env_onenand.c index ac8a8c15e7..ad5b1d7aa9 100644 --- a/common/env_onenand.c +++ b/common/env_onenand.c @@ -103,7 +103,7 @@ int saveenv(void) instr.addr = env_addr; instr.addr -= (unsigned long)onenand_chip.base; if (onenand_erase(&onenand_mtd, &instr)) { - printf("OneNAND: erase failed at 0x%08x\n", env_addr); + printf("OneNAND: erase failed at 0x%08lx\n", env_addr); return 1; } diff --git a/common/fdt_support.c b/common/fdt_support.c index 3828228204..93b144e64c 100644 --- a/common/fdt_support.c +++ b/common/fdt_support.c @@ -442,3 +442,90 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd) prop, compat, fdt_strerror(err)); } #endif /* CONFIG_HAS_FSL_DR_USB */ + +#if defined(CONFIG_MPC83XX) || defined(CONFIG_MPC85xx) +/* + * update crypto node properties to a specified revision of the SEC + * called with sec_rev == 0 if not on an mpc8xxxE processor + */ +void fdt_fixup_crypto_node(void *blob, int sec_rev) +{ + const struct sec_rev_prop { + u32 sec_rev; + u32 num_channels; + u32 channel_fifo_len; + u32 exec_units_mask; + u32 descriptor_types_mask; + } sec_rev_prop_list [] = { + { 0x0200, 4, 24, 0x07e, 0x01010ebf }, /* SEC 2.0 */ + { 0x0201, 4, 24, 0x0fe, 0x012b0ebf }, /* SEC 2.1 */ + { 0x0202, 1, 24, 0x04c, 0x0122003f }, /* SEC 2.2 */ + { 0x0204, 4, 24, 0x07e, 0x012b0ebf }, /* SEC 2.4 */ + { 0x0300, 4, 24, 0x9fe, 0x03ab0ebf }, /* SEC 3.0 */ + { 0x0303, 4, 24, 0x97c, 0x03ab0abf }, /* SEC 3.3 */ + }; + char compat_strlist[ARRAY_SIZE(sec_rev_prop_list) * + sizeof("fsl,secX.Y")]; + int crypto_node, sec_idx, err; + char *p; + u32 val; + + /* locate crypto node based on lowest common compatible */ + crypto_node = fdt_node_offset_by_compatible(blob, -1, "fsl,sec2.0"); + if (crypto_node == -FDT_ERR_NOTFOUND) + return; + + /* delete it if not on an E-processor */ + if (crypto_node > 0 && !sec_rev) { + fdt_del_node(blob, crypto_node); + return; + } + + /* else we got called for possible uprev */ + for (sec_idx = 0; sec_idx < ARRAY_SIZE(sec_rev_prop_list); sec_idx++) + if (sec_rev_prop_list[sec_idx].sec_rev == sec_rev) + break; + + if (sec_idx == ARRAY_SIZE(sec_rev_prop_list)) { + puts("warning: unknown SEC revision number\n"); + return; + } + + val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].num_channels); + err = fdt_setprop(blob, crypto_node, "fsl,num-channels", &val, 4); + if (err < 0) + printf("WARNING: could not set crypto property: %s\n", + fdt_strerror(err)); + + val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].descriptor_types_mask); + err = fdt_setprop(blob, crypto_node, "fsl,descriptor-types-mask", &val, 4); + if (err < 0) + printf("WARNING: could not set crypto property: %s\n", + fdt_strerror(err)); + + val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].exec_units_mask); + err = fdt_setprop(blob, crypto_node, "fsl,exec-units-mask", &val, 4); + if (err < 0) + printf("WARNING: could not set crypto property: %s\n", + fdt_strerror(err)); + + val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].channel_fifo_len); + err = fdt_setprop(blob, crypto_node, "fsl,channel-fifo-len", &val, 4); + if (err < 0) + printf("WARNING: could not set crypto property: %s\n", + fdt_strerror(err)); + + val = 0; + while (sec_idx >= 0) { + p = compat_strlist + val; + val += sprintf(p, "fsl,sec%d.%d", + (sec_rev_prop_list[sec_idx].sec_rev & 0xff00) >> 8, + sec_rev_prop_list[sec_idx].sec_rev & 0x00ff) + 1; + sec_idx--; + } + err = fdt_setprop(blob, crypto_node, "compatible", &compat_strlist, val); + if (err < 0) + printf("WARNING: could not set crypto property: %s\n", + fdt_strerror(err)); +} +#endif /* defined(CONFIG_MPC83XX) || defined(CONFIG_MPC85xx) */ diff --git a/common/flash.c b/common/flash.c index 888ff9c67c..fe39d55ef6 100644 --- a/common/flash.c +++ b/common/flash.c @@ -104,7 +104,7 @@ addr2info (ulong addr) flash_info_t *info; int i; - for (i=0, info=&flash_info[0]; i<CFG_MAX_FLASH_BANKS; ++i, ++info) { + for (i=0, info = &flash_info[0]; i<CFG_MAX_FLASH_BANKS; ++i, ++info) { if (info->flash_id != FLASH_UNKNOWN && addr >= info->start[0] && /* WARNING - The '- 1' is needed if the flash diff --git a/common/hush.c b/common/hush.c index b43f6185ac..75c18ce8ae 100644 --- a/common/hush.c +++ b/common/hush.c @@ -953,7 +953,7 @@ static int b_adduint(o_string *o, unsigned int i) static int static_get(struct in_str *i) { - int ch=*i->p++; + int ch = *i->p++; if (ch=='\0') return EOF; return ch; } @@ -1104,7 +1104,7 @@ static int file_get(struct in_str *i) ch = 0; /* If there is data waiting, eat it up */ if (i->p && *i->p) { - ch=*i->p++; + ch = *i->p++; } else { /* need to double check i->file because we might be doing something * more complicated by now, like sourcing or substituting. */ @@ -1121,7 +1121,7 @@ static int file_get(struct in_str *i) i->__promptme = 0; #endif if (i->p && *i->p) { - ch=*i->p++; + ch = *i->p++; } #ifndef __U_BOOT__ } else { diff --git a/common/image.c b/common/image.c index ddd9e8ba04..535c302d4e 100644 --- a/common/image.c +++ b/common/image.c @@ -827,13 +827,13 @@ int boot_get_ramdisk (int argc, char *argv[], bootm_headers_t *images, cfg_noffset = fit_conf_get_node (fit_hdr, fit_uname_config); if (cfg_noffset < 0) { debug ("* ramdisk: no such config\n"); - return 0; + return 1; } rd_noffset = fit_conf_get_ramdisk_node (fit_hdr, cfg_noffset); if (rd_noffset < 0) { debug ("* ramdisk: no ramdisk in config\n"); - return 0; + return 1; } } #endif @@ -872,7 +872,7 @@ int boot_get_ramdisk (int argc, char *argv[], bootm_headers_t *images, if (!fit_check_format (fit_hdr)) { puts ("Bad FIT ramdisk image format!\n"); show_boot_progress (-120); - return 0; + return 1; } show_boot_progress (121); @@ -887,7 +887,7 @@ int boot_get_ramdisk (int argc, char *argv[], bootm_headers_t *images, if (cfg_noffset < 0) { puts ("Could not find configuration node\n"); show_boot_progress (-122); - return 0; + return 1; } fit_uname_config = fdt_get_name (fit_hdr, cfg_noffset, NULL); printf (" Using '%s' configuration\n", fit_uname_config); @@ -902,20 +902,20 @@ int boot_get_ramdisk (int argc, char *argv[], bootm_headers_t *images, if (rd_noffset < 0) { puts ("Could not find subimage node\n"); show_boot_progress (-124); - return 0; + return 1; } printf (" Trying '%s' ramdisk subimage\n", fit_uname_ramdisk); show_boot_progress (125); if (!fit_check_ramdisk (fit_hdr, rd_noffset, arch, images->verify)) - return 0; + return 1; /* get ramdisk image data address and length */ if (fit_image_get_data (fit_hdr, rd_noffset, &data, &size)) { puts ("Could not find ramdisk subimage data!\n"); show_boot_progress (-127); - return 0; + return 1; } show_boot_progress (128); @@ -925,7 +925,7 @@ int boot_get_ramdisk (int argc, char *argv[], bootm_headers_t *images, if (fit_image_get_load (fit_hdr, rd_noffset, &rd_load)) { puts ("Can't get ramdisk subimage load address!\n"); show_boot_progress (-129); - return 0; + return 1; } show_boot_progress (129); diff --git a/common/lcd.c b/common/lcd.c index ebf377aa89..eec1f53b0a 100644 --- a/common/lcd.c +++ b/common/lcd.c @@ -539,7 +539,7 @@ void bitmap_plot (int x, int y) debug ("Logo: width %d height %d colors %d cmap %d\n", BMP_LOGO_WIDTH, BMP_LOGO_HEIGHT, BMP_LOGO_COLORS, - sizeof(bmp_logo_palette)/(sizeof(ushort))); + (int)(sizeof(bmp_logo_palette)/(sizeof(ushort)))); bmap = &bmp_logo_bitmap[0]; fb = (uchar *)(lcd_base + y * lcd_line_length + x); @@ -728,7 +728,7 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y) WATCHDOG_RESET(); for (j = 0; j < width ; j++) #if defined(CONFIG_PXA250) - *(fb++)=*(bmap++); + *(fb++) = *(bmap++); #elif defined(CONFIG_MPC823) || defined(CONFIG_MCC200) *(fb++)=255-*(bmap++); #endif diff --git a/common/usb.c b/common/usb.c index a0107dca53..a45d113a74 100644 --- a/common/usb.c +++ b/common/usb.c @@ -252,7 +252,7 @@ int usb_set_maxpacket(struct usb_device *dev) for(i=0; i<dev->config.bNumInterfaces;i++) { for(ii=0; ii<dev->config.if_desc[i].bNumEndpoints; ii++) { - ep=&dev->config.if_desc[i].ep_desc[ii]; + ep = &dev->config.if_desc[i].ep_desc[ii]; b=ep->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; if((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)==USB_ENDPOINT_XFER_CONTROL) { /* Control => bidirectional */ @@ -627,7 +627,7 @@ int usb_string(struct usb_device *dev, int index, char *buf, size_t size) if (size <= 0 || !buf || !index) return -1; buf[0] = 0; - tbuf=&mybuf[0]; + tbuf = &mybuf[0]; /* get langid for strings if it's not yet known */ if (!dev->have_langid) { @@ -857,7 +857,7 @@ void usb_scan_devices(void) /* first make all devices unknown */ for(i=0;i<USB_MAX_DEVICE;i++) { memset(&usb_dev[i],0,sizeof(struct usb_device)); - usb_dev[i].devnum=-1; + usb_dev[i].devnum = -1; } dev_index=0; /* device 0 is always present (root hub, so let it analyze) */ diff --git a/common/usb_kbd.c b/common/usb_kbd.c index 1e79208d7c..c8764952ec 100644 --- a/common/usb_kbd.c +++ b/common/usb_kbd.c @@ -730,8 +730,8 @@ static int usb_kbd_get_hid_desc(struct usb_device *dev) return -1; } printf(" report descriptor (size %u, read %d)\n", len, index); - start=&buffer[0]; - end=&buffer[len]; + start = &buffer[0]; + end = &buffer[len]; i=0; do { index=fetch_item(start,end,&item); diff --git a/common/usb_storage.c b/common/usb_storage.c index 3e113b4084..d8fbb69a36 100644 --- a/common/usb_storage.c +++ b/common/usb_storage.c @@ -731,7 +731,7 @@ int usb_stor_CB_transport(ccb *srb, struct us_data *us) ccb reqsrb; int retry,notready; - psrb=&reqsrb; + psrb = &reqsrb; status=USB_STOR_TRANSPORT_GOOD; retry=0; notready=0; @@ -776,7 +776,7 @@ do_retry: psrb->cmd[1]=srb->lun<<5; psrb->cmd[4]=18; psrb->datalen=18; - psrb->pdata=&srb->sense_buf[0]; + psrb->pdata = &srb->sense_buf[0]; psrb->cmdlen=12; /* issue the command */ result=usb_stor_CB_comdat(psrb,us); @@ -858,7 +858,7 @@ static int usb_request_sense(ccb *srb,struct us_data *ss) srb->cmd[1]=srb->lun<<5; srb->cmd[4]=18; srb->datalen=18; - srb->pdata=&srb->sense_buf[0]; + srb->pdata = &srb->sense_buf[0]; srb->cmdlen=12; ss->transport(srb,ss); USB_STOR_PRINTF("Request Sense returned %02X %02X %02X\n",srb->sense_buf[2],srb->sense_buf[12],srb->sense_buf[13]); diff --git a/cpu/arm926ejs/cpu.c b/cpu/arm926ejs/cpu.c index 722732e589..56c6289da6 100644 --- a/cpu/arm926ejs/cpu.c +++ b/cpu/arm926ejs/cpu.c @@ -134,25 +134,52 @@ int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) return (0); } -void icache_enable (void) +/* cache_bit must be either C1_IC or C1_DC */ +static void cache_enable(uint32_t cache_bit) { - ulong reg; + uint32_t reg; - reg = read_p15_c1 (); /* get control reg. */ - cp_delay (); - write_p15_c1 (reg | C1_IC); + reg = read_p15_c1(); /* get control reg. */ + cp_delay(); + write_p15_c1(reg | cache_bit); } -void icache_disable (void) +/* cache_bit must be either C1_IC or C1_DC */ +static void cache_disable(uint32_t cache_bit) { - ulong reg; + uint32_t reg; - reg = read_p15_c1 (); - cp_delay (); - write_p15_c1 (reg & ~C1_IC); + reg = read_p15_c1(); + cp_delay(); + write_p15_c1(reg & ~cache_bit); } -int icache_status (void) +void icache_enable(void) { - return (read_p15_c1 () & C1_IC) != 0; + cache_enable(C1_IC); +} + +void icache_disable(void) +{ + cache_disable(C1_IC); +} + +int icache_status(void) +{ + return (read_p15_c1() & C1_IC) != 0; +} + +void dcache_enable(void) +{ + cache_enable(C1_DC); +} + +void dcache_disable(void) +{ + cache_disable(C1_DC); +} + +int dcache_status(void) +{ + return (read_p15_c1() & C1_DC) != 0; } diff --git a/cpu/arm926ejs/davinci/ether.c b/cpu/arm926ejs/davinci/ether.c index d286ec0c33..5ae035b986 100644 --- a/cpu/arm926ejs/davinci/ether.c +++ b/cpu/arm926ejs/davinci/ether.c @@ -357,6 +357,8 @@ static int dm644x_eth_hw_init(void) phy.auto_negotiate = gen_auto_negotiate; } + printf("Ethernet PHY: %s\n", phy.name); + return(1); } diff --git a/cpu/i386/serial.c b/cpu/i386/serial.c index baf35e53d5..8b5f8fa117 100644 --- a/cpu/i386/serial.c +++ b/cpu/i386/serial.c @@ -413,8 +413,8 @@ void kgdb_serial_init(void) * Init onboard 16550 UART */ outb(0x80, UART1_BASE + UART_LCR); /* set DLAB bit */ - outb(bdiv & 0xff), UART1_BASE + UART_DLL); /* set divisor for 9600 baud */ - outb(bdiv >> 8), UART1_BASE + UART_DLM); /* set divisor for 9600 baud */ + outb((bdiv & 0xff), UART1_BASE + UART_DLL); /* set divisor for 9600 baud */ + outb((bdiv >> 8 ), UART1_BASE + UART_DLM); /* set divisor for 9600 baud */ outb(0x03, UART1_BASE + UART_LCR); /* line control 8 bits no parity */ outb(0x00, UART1_BASE + UART_FCR); /* disable FIFO */ outb(0x00, UART1_BASE + UART_MCR); /* no modem control DTR RTS */ diff --git a/cpu/ixp/npe/npe.c b/cpu/ixp/npe/npe.c index a33b956975..892096b26f 100644 --- a/cpu/ixp/npe/npe.c +++ b/cpu/ixp/npe/npe.c @@ -67,7 +67,7 @@ static void *npe_alloc(int size) p = npe_alloc_free; npe_alloc_free += size; } else { - printf("%s: failed (count=%d, size=%d)!\n", count, size); + printf("npe_alloc: failed (count=%d, size=%d)!\n", count, size); } return p; } diff --git a/cpu/mcf5227x/cpu_init.c b/cpu/mcf5227x/cpu_init.c index 71b053d4d6..cf29559e71 100644 --- a/cpu/mcf5227x/cpu_init.c +++ b/cpu/mcf5227x/cpu_init.c @@ -106,7 +106,7 @@ void cpu_init_f(void) */ int cpu_init_r(void) { -#ifdef CONFIG_MCFTMR +#ifdef CONFIG_MCFRTC volatile rtc_t *rtc = (volatile rtc_t *)(CFG_MCFRTC_BASE); volatile rtcex_t *rtcex = (volatile rtcex_t *)&rtc->extended; u32 oscillator = CFG_RTC_OSCILLATOR; diff --git a/cpu/mcf52x2/cpu_init.c b/cpu/mcf52x2/cpu_init.c index 207a37e7d5..344bceeda1 100644 --- a/cpu/mcf52x2/cpu_init.c +++ b/cpu/mcf52x2/cpu_init.c @@ -419,8 +419,7 @@ void cpu_init_f(void) else is doing it! */ #if defined(CFG_CS0_BASE) & defined(CFG_CS0_SIZE) & \ - defined(CFG_CS0_WIDTH) & defined(CFG_CS0_RO) & \ - defined(CFG_CS0_WS) + defined(CFG_CS0_WIDTH) & defined(CFG_CS0_WS) MCFCSM_CSAR0 = (CFG_CS0_BASE >> 16) & 0xFFFF; @@ -447,8 +446,7 @@ void cpu_init_f(void) #endif #if defined(CFG_CS1_BASE) & defined(CFG_CS1_SIZE) & \ - defined(CFG_CS1_WIDTH) & defined(CFG_CS1_RO) & \ - defined(CFG_CS1_WS) + defined(CFG_CS1_WIDTH) & defined(CFG_CS1_WS) MCFCSM_CSAR1 = (CFG_CS1_BASE >> 16) & 0xFFFF; @@ -476,8 +474,7 @@ void cpu_init_f(void) #endif #if defined(CFG_CS2_BASE) & defined(CFG_CS2_SIZE) & \ - defined(CFG_CS2_WIDTH) & defined(CFG_CS2_RO) & \ - defined(CFG_CS2_WS) + defined(CFG_CS2_WIDTH) & defined(CFG_CS2_WS) MCFCSM_CSAR2 = (CFG_CS2_BASE >> 16) & 0xFFFF; @@ -505,8 +502,7 @@ void cpu_init_f(void) #endif #if defined(CFG_CS3_BASE) & defined(CFG_CS3_SIZE) & \ - defined(CFG_CS3_WIDTH) & defined(CFG_CS3_RO) & \ - defined(CFG_CS3_WS) + defined(CFG_CS3_WIDTH) & defined(CFG_CS3_WS) MCFCSM_CSAR3 = (CFG_CS3_BASE >> 16) & 0xFFFF; diff --git a/cpu/mcf52x2/speed.c b/cpu/mcf52x2/speed.c index 5fafcd8c5f..f6edd5b6fa 100644 --- a/cpu/mcf52x2/speed.c +++ b/cpu/mcf52x2/speed.c @@ -69,7 +69,7 @@ int get_clocks (void) /* Setup PLL */ pll->syncr = 0x01080000; - while (!(pll->synsr & FMPLL_SYNSR_LOCK) + while (!(pll->synsr & FMPLL_SYNSR_LOCK)) ; pll->syncr = 0x01000000; while (!(pll->synsr & FMPLL_SYNSR_LOCK)) diff --git a/cpu/mcf5445x/config.mk b/cpu/mcf5445x/config.mk index 88433f2f6d..67efa07af7 100644 --- a/cpu/mcf5445x/config.mk +++ b/cpu/mcf5445x/config.mk @@ -29,3 +29,9 @@ PLATFORM_CPPFLAGS += -mcpu=54455 -fPIC else PLATFORM_CPPFLAGS += -m5407 -fPIC endif + +ifneq (,$(findstring -linux-,$(shell $(CC) --version))) +ifneq (,$(findstring GOT,$(shell $(LD) --help))) +PLATFORM_LDFLAGS += --got=single +endif +endif diff --git a/cpu/mcf5445x/cpu_init.c b/cpu/mcf5445x/cpu_init.c index 585216d6e6..e07748bd80 100644 --- a/cpu/mcf5445x/cpu_init.c +++ b/cpu/mcf5445x/cpu_init.c @@ -110,7 +110,7 @@ void cpu_init_f(void) */ int cpu_init_r(void) { -#ifdef CONFIG_MCFTMR +#ifdef CONFIG_MCFRTC volatile rtc_t *rtc = (volatile rtc_t *)(CFG_MCFRTC_BASE); volatile rtcex_t *rtcex = (volatile rtcex_t *)&rtc->extended; diff --git a/cpu/mcf5445x/start.S b/cpu/mcf5445x/start.S index 3241b278e1..89ec7bcc91 100644 --- a/cpu/mcf5445x/start.S +++ b/cpu/mcf5445x/start.S @@ -253,7 +253,7 @@ clear_bss: /* exception code */ .globl _fault _fault: - jmp _fault + bra _fault .globl _exc_handler _exc_handler: diff --git a/cpu/mcf547x_8x/config.mk b/cpu/mcf547x_8x/config.mk index e5f4385dd3..567b281926 100644 --- a/cpu/mcf547x_8x/config.mk +++ b/cpu/mcf547x_8x/config.mk @@ -29,3 +29,9 @@ PLATFORM_CPPFLAGS += -mcpu=5485 -fPIC else PLATFORM_CPPFLAGS += -m5407 -fPIC endif + +ifneq (,$(findstring -linux-,$(shell $(CC) --version))) +ifneq (,$(findstring GOT,$(shell $(LD) --help))) +PLATFORM_LDFLAGS += --got=single +endif +endif diff --git a/cpu/mcf547x_8x/start.S b/cpu/mcf547x_8x/start.S index 8b8708d030..87355f9581 100644 --- a/cpu/mcf547x_8x/start.S +++ b/cpu/mcf547x_8x/start.S @@ -259,7 +259,7 @@ clear_bss: /* exception code */ .globl _fault _fault: - jmp _fault + bra _fault .globl _exc_handler _exc_handler: diff --git a/cpu/microblaze/interrupts.c b/cpu/microblaze/interrupts.c index 3f04b29983..26e88cb519 100644 --- a/cpu/microblaze/interrupts.c +++ b/cpu/microblaze/interrupts.c @@ -203,7 +203,7 @@ int do_irqinfo (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) for (i = 0; i < CFG_INTC_0_NUM; i++) { if (act->handler != (interrupt_handler_t*) def_hdlr) { - printf ("%02d %08lx %08lx %d\n", i, + printf ("%02d %08x %08x %d\n", i, (int)act->handler, (int)act->arg, act->count); } act++; diff --git a/cpu/mpc512x/cpu.c b/cpu/mpc512x/cpu.c index bed77acaa9..b59f36d5f1 100644 --- a/cpu/mpc512x/cpu.c +++ b/cpu/mpc512x/cpu.c @@ -133,8 +133,9 @@ void watchdog_reset (void) #ifdef CONFIG_OF_LIBFDT void ft_cpu_setup(void *blob, bd_t *bd) { - char * cpu_path = "/cpus/" OF_CPU; - char * eth_path = "/" OF_SOC "/ethernet@2800"; + char *cpu_path = "/cpus/" OF_CPU; + char *eth_path = "/" OF_SOC "/ethernet@2800"; + char *eth_path_old = "/" OF_SOC_OLD "/ethernet@2800"; do_fixup_by_path_u32(blob, cpu_path, "timebase-frequency", OF_TBCLK, 1); do_fixup_by_path_u32(blob, cpu_path, "bus-frequency", bd->bi_busfreq, 1); @@ -144,5 +145,8 @@ void ft_cpu_setup(void *blob, bd_t *bd) /* this is so old kernels with old device trees will boot */ do_fixup_by_path_u32(blob, "/" OF_SOC_OLD, "bus-frequency", bd->bi_ipsfreq, 0); + do_fixup_by_path(blob, eth_path_old, "local-mac-address", + bd->bi_enetaddr, 6, 0); + do_fixup_by_path(blob, eth_path_old, "address", bd->bi_enetaddr, 6, 0); } #endif diff --git a/cpu/mpc512x/fec.c b/cpu/mpc512x/fec.c index c226a8a5a2..e9df7de5e7 100644 --- a/cpu/mpc512x/fec.c +++ b/cpu/mpc512x/fec.c @@ -604,13 +604,10 @@ static int mpc512x_fec_recv (struct eth_device *dev) /********************************************************************/ int mpc512x_fec_initialize (bd_t * bis) { - - immap_t *im = (immap_t*) CFG_IMMR; mpc512x_fec_priv *fec; struct eth_device *dev; int i; char *tmp, *end, env_enetaddr[6]; - uint32 *reg; void * bd; fec = (mpc512x_fec_priv *) malloc (sizeof(*fec)); @@ -639,18 +636,6 @@ int mpc512x_fec_initialize (bd_t * bis) fec512x_miiphy_read, fec512x_miiphy_write); #endif - /* - * Initialize I\O pins - */ - reg = (uint32 *) &(im->io_ctrl.regs[PSC0_0_IDX]); - - for (i = 0; i < 15; i++) - reg[i] = IOCTRL_MUX_FEC | 0x00000001; - - im->io_ctrl.regs[SPDIF_TXCLOCK_IDX] = IOCTRL_MUX_FEC | 0x00000001; - im->io_ctrl.regs[SPDIF_TX_IDX] = IOCTRL_MUX_FEC | 0x00000001; - im->io_ctrl.regs[SPDIF_RX_IDX] = IOCTRL_MUX_FEC | 0x00000001; - /* Clean up space FEC's MIB and FIFO RAM ...*/ memset ((void *) MPC512X_FEC + 0x200, 0x00, 0x400); diff --git a/cpu/mpc512x/speed.c b/cpu/mpc512x/speed.c index cfaffb57a7..e62477bc0b 100644 --- a/cpu/mpc512x/speed.c +++ b/cpu/mpc512x/speed.c @@ -126,7 +126,7 @@ ulong get_bus_freq (ulong dummy) int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) { printf("Clock configuration:\n"); - printf(" CPU: %4d MHz\n", gd->cpu_clk / 1000000); + printf(" CPU: %4ld MHz\n", gd->cpu_clk / 1000000); printf(" Coherent System Bus: %4d MHz\n", gd->csb_clk / 1000000); printf(" IPS Bus: %4d MHz\n", gd->ips_clk / 1000000); printf(" PCI: %4d MHz\n", gd->pci_clk / 1000000); diff --git a/cpu/mpc83xx/ecc.c b/cpu/mpc83xx/ecc.c index 6f13094243..5137ab6fdb 100644 --- a/cpu/mpc83xx/ecc.c +++ b/cpu/mpc83xx/ecc.c @@ -45,7 +45,7 @@ void ecc_print_status(void) (ddr->err_disable & ECC_ERROR_DISABLE_MSED) ? 1 : 0); /* Error injection */ - printf("Memory Data Path Error Injection Mask High/Low: %08lx %08lx\n", + printf("Memory Data Path Error Injection Mask High/Low: %08x %08x\n", ddr->data_err_inject_hi, ddr->data_err_inject_lo); printf("Memory Data Path Error Injection Mask ECC:\n"); @@ -75,8 +75,8 @@ void ecc_print_status(void) (ddr->err_detect & ECC_ERROR_DETECT_MSE) ? 1 : 0); /* Capture data */ - printf("Memory Error Address Capture: 0x%08lx\n", ddr->capture_address); - printf("Memory Data Path Read Capture High/Low: %08lx %08lx\n", + printf("Memory Error Address Capture: 0x%08x\n", ddr->capture_address); + printf("Memory Data Path Read Capture High/Low: %08x %08x\n", ddr->capture_data_hi, ddr->capture_data_lo); printf("Memory Data Path Read Capture ECC: 0x%02x\n\n", ddr->capture_ecc & CAPTURE_ECC_ECE); diff --git a/cpu/mpc83xx/fdt.c b/cpu/mpc83xx/fdt.c index 02c4d0529c..fda85c15d0 100644 --- a/cpu/mpc83xx/fdt.c +++ b/cpu/mpc83xx/fdt.c @@ -26,6 +26,7 @@ #include <common.h> #include <libfdt.h> #include <fdt_support.h> +#include <asm/processor.h> extern void ft_qe_setup(void *blob); @@ -33,6 +34,23 @@ DECLARE_GLOBAL_DATA_PTR; void ft_cpu_setup(void *blob, bd_t *bd) { + immap_t *immr = (immap_t *)CFG_IMMR; + int spridr = immr->sysconf.spridr; + + /* + * delete crypto node if not on an E-processor + * initial revisions of the MPC834xE/6xE have the original SEC 2.0. + * EA revisions got the SEC uprevved to 2.4 but since the default device + * tree contains SEC 2.0 properties we uprev them here. + */ + if (!IS_E_PROCESSOR(spridr)) + fdt_fixup_crypto_node(blob, 0); + else if (IS_E_PROCESSOR(spridr) && + (SPR_FAMILY(spridr) == SPR_834X_FAMILY || + SPR_FAMILY(spridr) == SPR_836X_FAMILY) && + REVID_MAJOR(spridr) >= 2) + fdt_fixup_crypto_node(blob, 0x0204); + #if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) ||\ defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3) fdt_fixup_ethernet(blob, bd); @@ -60,7 +78,7 @@ void ft_cpu_setup(void *blob, bd_t *bd) #ifdef CFG_NS16550 do_fixup_by_compat_u32(blob, "ns16550", - "clock-frequency", bd->bi_busfreq, 1); + "clock-frequency", CFG_NS16550_CLK, 1); #endif fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c index 16145dd355..76c569de1b 100644 --- a/cpu/mpc83xx/speed.c +++ b/cpu/mpc83xx/speed.c @@ -508,7 +508,7 @@ int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) #endif printf(" Local Bus Controller:%4d MHz\n", gd->lbiu_clk / 1000000); printf(" Local Bus: %4d MHz\n", gd->lclk_clk / 1000000); - printf(" DDR: %4d MHz\n", gd->mem_clk / 1000000); + printf(" DDR: %4ld MHz\n", gd->mem_clk / 1000000); #if defined(CONFIG_MPC8360) printf(" DDR Secondary: %4d MHz\n", gd->mem_sec_clk / 1000000); #endif diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c index 0d50549f2d..bde8e56703 100644 --- a/cpu/mpc85xx/cpu.c +++ b/cpu/mpc85xx/cpu.c @@ -97,7 +97,7 @@ int checkcpu (void) if (cpu) { puts(cpu->name); - if (svr & 0x80000) + if (IS_E_PROCESSOR(svr)) puts("E"); } else { puts("Unknown"); diff --git a/cpu/mpc85xx/cpu_init.c b/cpu/mpc85xx/cpu_init.c index 736aef1725..4feb7519aa 100644 --- a/cpu/mpc85xx/cpu_init.c +++ b/cpu/mpc85xx/cpu_init.c @@ -261,37 +261,50 @@ int cpu_init_r(void) volatile uint cache_ctl; uint svr, ver; uint l2srbar; + u32 l2siz_field; svr = get_svr(); ver = SVR_SOC_VER(svr); asm("msync;isync"); cache_ctl = l2cache->l2ctl; + l2siz_field = (cache_ctl >> 28) & 0x3; - switch (cache_ctl & 0x30000000) { - case 0x20000000: - if (ver == SVR_8548 || ver == SVR_8548_E || - ver == SVR_8544 || ver == SVR_8568_E) { - puts ("512 KB "); - /* set L2E=1, L2I=1, & L2SRAM=0 */ - cache_ctl = 0xc0000000; + switch (l2siz_field) { + case 0x0: + printf(" unknown size (0x%08x)\n", cache_ctl); + return -1; + break; + case 0x1: + if (ver == SVR_8540 || ver == SVR_8560 || + ver == SVR_8541 || ver == SVR_8541_E || + ver == SVR_8555 || ver == SVR_8555_E) { + puts("128 KB "); + /* set L2E=1, L2I=1, & L2BLKSZ=1 (128 Kbyte) */ + cache_ctl = 0xc4000000; } else { puts("256 KB "); + cache_ctl = 0xc0000000; /* set L2E=1, L2I=1, & L2SRAM=0 */ + } + break; + case 0x2: + if (ver == SVR_8540 || ver == SVR_8560 || + ver == SVR_8541 || ver == SVR_8541_E || + ver == SVR_8555 || ver == SVR_8555_E) { + puts("256 KB "); /* set L2E=1, L2I=1, & L2BLKSZ=2 (256 Kbyte) */ cache_ctl = 0xc8000000; + } else { + puts ("512 KB "); + /* set L2E=1, L2I=1, & L2SRAM=0 */ + cache_ctl = 0xc0000000; } break; - case 0x10000000: - puts("256 KB "); - if (ver == SVR_8544 || ver == SVR_8544_E) { - cache_ctl = 0xc0000000; /* set L2E=1, L2I=1, & L2SRAM=0 */ - } + case 0x3: + puts("1024 KB "); + /* set L2E=1, L2I=1, & L2SRAM=0 */ + cache_ctl = 0xc0000000; break; - case 0x30000000: - case 0x00000000: - default: - printf(" unknown size (0x%08x)\n", cache_ctl); - return -1; } if (l2cache->l2ctl & 0x80000000) { diff --git a/cpu/mpc85xx/fdt.c b/cpu/mpc85xx/fdt.c index 92952e6d6e..c159934c5b 100644 --- a/cpu/mpc85xx/fdt.c +++ b/cpu/mpc85xx/fdt.c @@ -29,6 +29,7 @@ #include <asm/processor.h> extern void ft_qe_setup(void *blob); + #ifdef CONFIG_MP #include "mp.h" DECLARE_GLOBAL_DATA_PTR; @@ -205,6 +206,10 @@ static inline void ft_fixup_cache(void *blob) void ft_cpu_setup(void *blob, bd_t *bd) { + /* delete crypto node if not on an E-processor */ + if (!IS_E_PROCESSOR(get_svr())) + fdt_fixup_crypto_node(blob, 0); + #if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) ||\ defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3) fdt_fixup_ethernet(blob, bd); @@ -224,7 +229,7 @@ void ft_cpu_setup(void *blob, bd_t *bd) #ifdef CFG_NS16550 do_fixup_by_compat_u32(blob, "ns16550", - "clock-frequency", bd->bi_busfreq, 1); + "clock-frequency", CFG_NS16550_CLK, 1); #endif #ifdef CONFIG_CPM2 diff --git a/cpu/mpc85xx/mp.c b/cpu/mpc85xx/mp.c index a527cf3047..554830f46a 100644 --- a/cpu/mpc85xx/mp.c +++ b/cpu/mpc85xx/mp.c @@ -50,12 +50,12 @@ int cpu_status(int nr) if (nr == id) { table = (u32 *)get_spin_addr(); - printf("table base @ 0x%08x\n", table); + printf("table base @ 0x%p\n", table); } else { table = (u32 *)get_spin_addr() + nr * NUM_BOOT_ENTRY; printf("Running on cpu %d\n", id); printf("\n"); - printf("table @ 0x%08x:\n", table); + printf("table @ 0x%p\n", table); printf(" addr - 0x%08x\n", table[BOOT_ENTRY_ADDR_LOWER]); printf(" pir - 0x%08x\n", table[BOOT_ENTRY_PIR]); printf(" r3 - 0x%08x\n", table[BOOT_ENTRY_R3_LOWER]); diff --git a/cpu/mpc85xx/start.S b/cpu/mpc85xx/start.S index 2b5d90e278..10fe93629c 100644 --- a/cpu/mpc85xx/start.S +++ b/cpu/mpc85xx/start.S @@ -188,11 +188,12 @@ _start_e500: lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16M)@h ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16M)@l - lis r8,FSL_BOOKE_MAS2(TEXT_BASE, (MAS2_I|MAS2_G))@h - ori r8,r8,FSL_BOOKE_MAS2(TEXT_BASE, (MAS2_I|MAS2_G))@l + /* Align the mapping to 16MB */ + lis r8,FSL_BOOKE_MAS2(TEXT_BASE & 0xff000000, (MAS2_I|MAS2_G))@h + ori r8,r8,FSL_BOOKE_MAS2(TEXT_BASE & 0xff000000, (MAS2_I|MAS2_G))@l - lis r9,FSL_BOOKE_MAS3(0xff800000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h - ori r9,r9,FSL_BOOKE_MAS3(0xff800000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l + lis r9,FSL_BOOKE_MAS3(0xff000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h + ori r9,r9,FSL_BOOKE_MAS3(0xff000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l mtspr MAS0,r6 mtspr MAS1,r7 diff --git a/cpu/mpc86xx/cpu.c b/cpu/mpc86xx/cpu.c index 7d2b591d9f..ecea5b0643 100644 --- a/cpu/mpc86xx/cpu.c +++ b/cpu/mpc86xx/cpu.c @@ -214,6 +214,20 @@ get_tbclk(void) void watchdog_reset(void) { +#if defined(CONFIG_MPC8610) + /* + * This actually feed the hard enabled watchdog. + */ + volatile immap_t *immap = (immap_t *)CFG_IMMR; + volatile ccsr_wdt_t *wdt = &immap->im_wdt; + volatile ccsr_gur_t *gur = &immap->im_gur; + u32 tmp = gur->pordevsr; + + if (tmp & 0x4000) { + wdt->swsrr = 0x556c; + wdt->swsrr = 0xaa39; + } +#endif } #endif /* CONFIG_WATCHDOG */ diff --git a/cpu/mpc86xx/fdt.c b/cpu/mpc86xx/fdt.c index 379306ea4f..80a5c78a79 100644 --- a/cpu/mpc86xx/fdt.c +++ b/cpu/mpc86xx/fdt.c @@ -30,6 +30,6 @@ void ft_cpu_setup(void *blob, bd_t *bd) #ifdef CFG_NS16550 do_fixup_by_compat_u32(blob, "ns16550", - "clock-frequency", bd->bi_busfreq, 1); + "clock-frequency", CFG_NS16550_CLK, 1); #endif } diff --git a/cpu/mpc86xx/interrupts.c b/cpu/mpc86xx/interrupts.c index d9f634fdab..f16744bfdc 100644 --- a/cpu/mpc86xx/interrupts.c +++ b/cpu/mpc86xx/interrupts.c @@ -36,6 +36,7 @@ #include <command.h> #include <asm/processor.h> #include <ppc_asm.tmpl> +#include <watchdog.h> unsigned long decrementer_count; /* count value for 1e6/HZ microseconds */ unsigned long timestamp; diff --git a/cpu/mpc86xx/traps.c b/cpu/mpc86xx/traps.c index 5695c3e453..13f386ddc8 100644 --- a/cpu/mpc86xx/traps.c +++ b/cpu/mpc86xx/traps.c @@ -218,7 +218,7 @@ UnknownException(struct pt_regs *regs) if (debugger_exception_handler && (*debugger_exception_handler) (regs)) return; #endif - printf("UnknownException regs@%x\n", regs); + printf("UnknownException regs@%lx\n", (ulong)regs); printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n", regs->nip, regs->msr, regs->trap); _exception(0, regs); diff --git a/cpu/mpc8xx/video.c b/cpu/mpc8xx/video.c index 8bf8e469cc..ef91165602 100644 --- a/cpu/mpc8xx/video.c +++ b/cpu/mpc8xx/video.c @@ -833,10 +833,10 @@ static void video_encoder_init (void) puts ("[VIDEO ENCODER] Configuring the encoder...\n"); - printf ("Sending %d bytes (@ %08lX) to I2C 0x%X:\n ", + printf ("Sending %zu bytes (@ %08lX) to I2C 0x%lX:\n ", sizeof(video_encoder_data), (ulong)video_encoder_data, - VIDEO_I2C_ADDR); + (ulong)VIDEO_I2C_ADDR); for (i=0; i<sizeof(video_encoder_data); ++i) { printf(" %02X", video_encoder_data[i]); } diff --git a/cpu/ppc4xx/40x_spd_sdram.c b/cpu/ppc4xx/40x_spd_sdram.c index 42fd7fb872..b21b13e493 100644 --- a/cpu/ppc4xx/40x_spd_sdram.c +++ b/cpu/ppc4xx/40x_spd_sdram.c @@ -126,9 +126,9 @@ long int spd_sdram(int(read_spd)(uint addr)) int sdram0_pmit=0x07c00000; #ifndef CONFIG_405EP /* not on PPC405EP */ - int sdram0_besr0=-1; - int sdram0_besr1=-1; - int sdram0_eccesr=-1; + int sdram0_besr0 = -1; + int sdram0_besr1 = -1; + int sdram0_eccesr = -1; #endif int sdram0_ecccfg; diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c index a27e276f25..e9940e8e5b 100644 --- a/cpu/ppc4xx/44x_spd_ddr2.c +++ b/cpu/ppc4xx/44x_spd_ddr2.c @@ -1150,50 +1150,50 @@ static void program_codt(unsigned long *dimm_populated, if (dimm_type == SDRAM_DDR2) { codt |= SDRAM_CODT_DQS_1_8_V_DDR2; if ((total_dimm == 1) && (firstSlot == TRUE)) { - if (total_rank == 1) { + if (total_rank == 1) { /* PUUU */ codt |= CALC_ODT_R(0); modt0 = CALC_ODT_W(0); modt1 = 0x00000000; modt2 = 0x00000000; modt3 = 0x00000000; } - if (total_rank == 2) { + if (total_rank == 2) { /* PPUU */ codt |= CALC_ODT_R(0) | CALC_ODT_R(1); - modt0 = CALC_ODT_W(0); - modt1 = CALC_ODT_W(0); + modt0 = CALC_ODT_W(0) | CALC_ODT_W(1); + modt1 = 0x00000000; modt2 = 0x00000000; modt3 = 0x00000000; } } else if ((total_dimm == 1) && (firstSlot != TRUE)) { - if (total_rank == 1) { + if (total_rank == 1) { /* UUPU */ codt |= CALC_ODT_R(2); modt0 = 0x00000000; modt1 = 0x00000000; modt2 = CALC_ODT_W(2); modt3 = 0x00000000; } - if (total_rank == 2) { + if (total_rank == 2) { /* UUPP */ codt |= CALC_ODT_R(2) | CALC_ODT_R(3); modt0 = 0x00000000; modt1 = 0x00000000; - modt2 = CALC_ODT_W(2); - modt3 = CALC_ODT_W(2); + modt2 = CALC_ODT_W(2) | CALC_ODT_W(3); + modt3 = 0x00000000; } } if (total_dimm == 2) { - if (total_rank == 2) { + if (total_rank == 2) { /* PUPU */ codt |= CALC_ODT_R(0) | CALC_ODT_R(2); modt0 = CALC_ODT_RW(2); modt1 = 0x00000000; modt2 = CALC_ODT_RW(0); modt3 = 0x00000000; } - if (total_rank == 4) { + if (total_rank == 4) { /* PPPP */ codt |= CALC_ODT_R(0) | CALC_ODT_R(1) | CALC_ODT_R(2) | CALC_ODT_R(3); - modt0 = CALC_ODT_RW(2); + modt0 = CALC_ODT_RW(2) | CALC_ODT_RW(3); modt1 = 0x00000000; - modt2 = CALC_ODT_RW(0); + modt2 = CALC_ODT_RW(0) | CALC_ODT_RW(1); modt3 = 0x00000000; } } diff --git a/cpu/ppc4xx/4xx_pcie.c b/cpu/ppc4xx/4xx_pcie.c index d50a538e38..9803fcc768 100644 --- a/cpu/ppc4xx/4xx_pcie.c +++ b/cpu/ppc4xx/4xx_pcie.c @@ -25,11 +25,11 @@ #define DEBUG #endif -#include <asm/processor.h> -#include <asm-ppc/io.h> -#include <ppc4xx.h> #include <common.h> #include <pci.h> +#include <ppc4xx.h> +#include <asm/processor.h> +#include <asm-ppc/io.h> #if (defined(CONFIG_440SPE) || defined(CONFIG_405EX) || \ defined(CONFIG_460EX) || defined(CONFIG_460GT)) && \ diff --git a/cpu/ppc4xx/fdt.c b/cpu/ppc4xx/fdt.c index ccc73d5d64..0323dc52fe 100644 --- a/cpu/ppc4xx/fdt.c +++ b/cpu/ppc4xx/fdt.c @@ -47,8 +47,16 @@ void __ft_board_setup(void *blob, bd_t *bd) val[1] = 0; /* always 0 */ val[2] = gd->bd->bi_flashstart; val[3] = gd->bd->bi_flashsize; - rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges", - val, sizeof(val), 1); + if (fdt_path_offset(blob, "/plb/opb/ebc") >= 0) { + rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges", + val, sizeof(val), 1); + } else { + /* + * Some 405 PPC's have EBC as direct PLB child in the dts + */ + rc = fdt_find_and_setprop(blob, "/plb/ebc", "ranges", + val, sizeof(val), 1); + } if (rc) printf("Unable to update property NOR mapping, err=%s\n", fdt_strerror(rc)); diff --git a/cpu/pxa/mmc.c b/cpu/pxa/mmc.c index 4495a808f5..2c86a01a03 100644 --- a/cpu/pxa/mmc.c +++ b/cpu/pxa/mmc.c @@ -535,8 +535,10 @@ static void mmc_decode_csd(uint32_t * resp) mmc_dev.removable = 0; mmc_dev.block_read = mmc_bread; - printf("Detected: %u blocks of %u bytes (%uMB) ", mmc_dev.lba, - mmc_dev.blksz, mmc_dev.lba * mmc_dev.blksz / (1024 * 1024)); + printf("Detected: %lu blocks of %lu bytes (%luMB) ", + mmc_dev.lba, + mmc_dev.blksz, + mmc_dev.lba * mmc_dev.blksz / (1024 * 1024)); } int diff --git a/doc/README.mvbc_p b/doc/README.mvbc_p new file mode 100644 index 0000000000..e3fcb4eb1b --- /dev/null +++ b/doc/README.mvbc_p @@ -0,0 +1,73 @@ +Matrix Vision mvBlueCOUGAR-P (mvBC-P) +------------------------------------- + +1. Board Description + + The mvBC-P is a 70x40x40mm multi board gigabit ethernet network camera + with main focus on GigEVision protocol in combination with local image + preprocessing. + + Power Supply is either VDC 48V or Pover over Ethernet (PoE). + +2 System Components + +2.1 CPU + Freescale MPC5200B CPU running at 400MHz core and 133MHz XLB/IPB. + 64MB SDRAM @ 133MHz. + 8 MByte Nor Flash on local bus. + 1 serial ports. Console running on ttyS0 @ 115200 8N1. + +2.2 PCI + PCI clock fixed at 66MHz. Arbitration inside FPGA. + Intel GD82541ER network MAC/PHY and FPGA connected. + +2.3 FPGA + Altera Cyclone-II EP2C8 with PCI DMA engine. + Connects to Matrix Vision specific CCD/CMOS sensor interface. + Utilizes 64MB Nand Flash. + +2.3.1 I/O @ FPGA + 2 Outputs : photo coupler + 2 Inputs : photo coupler + +2.4 I2C + LM75 @ 0x90 for temperature monitoring. + EEPROM @ 0xA0 for vendor specifics. + image sensor interface (slave adresses depend on sensor) + +3 Flash layout. + + reset vector is 0x00000100, i.e. "LOWBOOT". + + FF800000 u-boot + FF840000 u-boot script image + FF850000 redundant u-boot script image + FF860000 FPGA raw bit file + FF8A0000 tbd. + FF900000 root FS + FFC00000 kernel + FFFC0000 device tree blob + FFFD0000 redundant device tree blob + FFFE0000 environment + FFFF0000 redundant environment + + mtd partitions are propagated to linux kernel via device tree blob. + +4 Booting + + On startup the bootscript @ FF840000 is executed. This script can be + exchanged easily. Default boot mode is "boot from flash", i.e. system + works stand-alone. + + This behaviour depends on some environment variables : + + "netboot" : yes ->try dhcp/bootp and boot from network. + A "dhcp_client_id" and "dhcp_vendor-class-identifier" can be used for + DHCP server configuration, e.g. to provide different images to + different devices. + + During netboot the system tries to get 3 image files: + 1. Kernel - name + data is given during BOOTP. + 2. Initrd - name is stored in "initrd_name" + 3. device tree blob - name is stored in "dtb_name" + Fallback files are the flash versions. diff --git a/drivers/block/fsl_sata.c b/drivers/block/fsl_sata.c index d441a30ed5..55f593a491 100644 --- a/drivers/block/fsl_sata.c +++ b/drivers/block/fsl_sata.c @@ -510,7 +510,7 @@ static int fsl_sata_exec_cmd(struct fsl_sata *sata, struct cfis *cfis, int rc; if (tag > SATA_HC_MAX_CMD || tag < 0) { - printf("tag is out of range, tag=\n\r", tag); + printf("tag is out of range, tag=%d\n\r", tag); return -1; } diff --git a/drivers/block/libata.c b/drivers/block/libata.c index 90e9a43ca8..65b02039e4 100644 --- a/drivers/block/libata.c +++ b/drivers/block/libata.c @@ -107,7 +107,7 @@ void ata_dump_id(u16 *id) /* Total sectors of device */ n_sectors = ata_id_n_sectors(id); - printf("Capablity: %d sectors\n\r", n_sectors); + printf("Capablity: %lld sectors\n\r", n_sectors); printf ("id[49]: capabilities = 0x%04x\n" "id[53]: field valid = 0x%04x\n" diff --git a/drivers/block/sym53c8xx.c b/drivers/block/sym53c8xx.c index 87b63b742c..b880435f1e 100644 --- a/drivers/block/sym53c8xx.c +++ b/drivers/block/sym53c8xx.c @@ -784,7 +784,7 @@ retry: pccb->msgout[0]=SCSI_IDENTIFY; transbytes=pccb->trans_bytes; tmpptr=pccb->pdata; - pccb->pdata=&pccb->sense_buf[0]; + pccb->pdata = &pccb->sense_buf[0]; datalen=pccb->datalen; pccb->datalen=14; tmpstat=pccb->status; diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 065433a608..f09f145634 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -30,13 +30,13 @@ include $(TOPDIR)/config.mk LIB = $(obj)libhwmon.a -COBJS-y += adm1021.o -COBJS-y += ds1621.o -COBJS-y += ds1722.o -COBJS-y += ds1775.o +COBJS-$(CONFIG_DTT_ADM1021) += adm1021.o +COBJS-$(CONFIG_DTT_DS1621) += ds1621.o +COBJS-$(CONFIG_DTT_DS1722) += ds1722.o +COBJS-$(CONFIG_DTT_DS1775) += ds1775.o COBJS-$(CONFIG_DTT_LM73) += lm73.o -COBJS-y += lm75.o -COBJS-y += lm81.o +COBJS-$(CONFIG_DTT_LM75) += lm75.o +COBJS-$(CONFIG_DTT_LM81) += lm81.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c index 9f65cfb274..b791ec0415 100644 --- a/drivers/hwmon/adm1021.c +++ b/drivers/hwmon/adm1021.c @@ -33,11 +33,40 @@ #include <common.h> -#ifdef CONFIG_DTT_ADM1021 - #include <i2c.h> #include <dtt.h> +#define DTT_READ_LOC_VALUE 0x00 +#define DTT_READ_REM_VALUE 0x01 +#define DTT_READ_STATUS 0x02 +#define DTT_READ_CONFIG 0x03 +#define DTT_READ_CONVRATE 0x04 +#define DTT_READ_LOC_HIGHLIM 0x05 +#define DTT_READ_LOC_LOWLIM 0x06 +#define DTT_READ_REM_HIGHLIM 0x07 +#define DTT_READ_REM_LOWLIM 0x08 +#define DTT_READ_DEVID 0xfe + +#define DTT_WRITE_CONFIG 0x09 +#define DTT_WRITE_CONVRATE 0x0a +#define DTT_WRITE_LOC_HIGHLIM 0x0b +#define DTT_WRITE_LOC_LOWLIM 0x0c +#define DTT_WRITE_REM_HIGHLIM 0x0d +#define DTT_WRITE_REM_LOWLIM 0x0e +#define DTT_WRITE_ONESHOT 0x0f + +#define DTT_STATUS_BUSY 0x80 /* 1=ADC Converting */ +#define DTT_STATUS_LHIGH 0x40 /* 1=Local High Temp Limit Tripped */ +#define DTT_STATUS_LLOW 0x20 /* 1=Local Low Temp Limit Tripped */ +#define DTT_STATUS_RHIGH 0x10 /* 1=Remote High Temp Limit Tripped */ +#define DTT_STATUS_RLOW 0x08 /* 1=Remote Low Temp Limit Tripped */ +#define DTT_STATUS_OPEN 0x04 /* 1=Remote Sensor Open-Circuit */ + +#define DTT_CONFIG_ALERT_MASKED 0x80 /* 0=ALERT Enabled, 1=ALERT Masked */ +#define DTT_CONFIG_STANDBY 0x40 /* 0=Run, 1=Standby */ + +#define DTT_ADM1021_DEVID 0x41 + typedef struct { uint i2c_addr:7; /* 7bit i2c chip address */ @@ -170,5 +199,3 @@ dtt_get_temp (int sensor) return (int) val; } /* dtt_get_temp() */ - -#endif /* CONFIG_DTT_ADM1021 */ diff --git a/drivers/hwmon/ds1621.c b/drivers/hwmon/ds1621.c index 494818131f..749aa2691b 100644 --- a/drivers/hwmon/ds1621.c +++ b/drivers/hwmon/ds1621.c @@ -27,7 +27,6 @@ #include <common.h> -#ifdef CONFIG_DTT_DS1621 #if !defined(CFG_EEPROM_PAGE_WRITE_ENABLE) || \ (CFG_EEPROM_PAGE_WRITE_BITS < 1) # error "CFG_EEPROM_PAGE_WRITE_ENABLE must be defined and CFG_EEPROM_PAGE_WRITE_BITS must be greater than 1 to use CONFIG_DTT_DS1621" @@ -39,6 +38,14 @@ * Device code */ #define DTT_I2C_DEV_CODE 0x48 /* Dallas Semi's DS1621 */ +#define DTT_READ_TEMP 0xAA +#define DTT_READ_COUNTER 0xA8 +#define DTT_READ_SLOPE 0xA9 +#define DTT_WRITE_START_CONV 0xEE +#define DTT_WRITE_STOP_CONV 0x22 +#define DTT_TEMP_HIGH 0xA1 +#define DTT_TEMP_LOW 0xA2 +#define DTT_CONFIG 0xAC int dtt_read(int sensor, int reg) { @@ -185,6 +192,3 @@ int dtt_get_temp(int sensor) return (dtt_read(sensor, DTT_READ_TEMP) / 256); } /* dtt_get_temp() */ - - -#endif /* CONFIG_DTT_DS1621 */ diff --git a/drivers/hwmon/ds1722.c b/drivers/hwmon/ds1722.c index c19ee01393..7e2f1ed4fb 100644 --- a/drivers/hwmon/ds1722.c +++ b/drivers/hwmon/ds1722.c @@ -1,8 +1,5 @@ #include <common.h> - -#ifdef CONFIG_DS1722 - #include <ssi.h> static void ds1722_select(int dev) @@ -138,5 +135,3 @@ int ds1722_probe(int dev) printf("%d.%d deg C\n\n", (char)(temp >> 8), temp & 0xff); return 0; } - -#endif diff --git a/drivers/hwmon/ds1775.c b/drivers/hwmon/ds1775.c index 0fbb0b42a7..6a4d8e56db 100644 --- a/drivers/hwmon/ds1775.c +++ b/drivers/hwmon/ds1775.c @@ -21,11 +21,14 @@ #include <common.h> -#ifdef CONFIG_DTT_DS1775 #include <i2c.h> #include <dtt.h> #define DTT_I2C_DEV_CODE CFG_I2C_DTT_ADDR /* Dallas Semi's DS1775 device code */ +#define DTT_READ_TEMP 0x0 +#define DTT_CONFIG 0x1 +#define DTT_TEMP_HYST 0x2 +#define DTT_TEMP_OS 0x3 int dtt_read(int sensor, int reg) { @@ -151,6 +154,3 @@ int dtt_get_temp(int sensor) { return (dtt_read(sensor, DTT_READ_TEMP) / 256); } - - -#endif /* CONFIG_DTT_DS1775 */ diff --git a/drivers/hwmon/lm73.c b/drivers/hwmon/lm73.c index 98e8bd2984..dd24683536 100644 --- a/drivers/hwmon/lm73.c +++ b/drivers/hwmon/lm73.c @@ -38,6 +38,12 @@ * Device code */ #define DTT_I2C_DEV_CODE 0x48 /* National Semi's LM73 device */ +#define DTT_READ_TEMP 0x0 +#define DTT_CONFIG 0x1 +#define DTT_TEMP_HIGH 0x2 +#define DTT_TEMP_LOW 0x3 +#define DTT_CONTROL 0x4 +#define DTT_ID 0x7 int dtt_read(int const sensor, int const reg) { diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c index c34851725e..8051cb228c 100644 --- a/drivers/hwmon/lm75.c +++ b/drivers/hwmon/lm75.c @@ -27,7 +27,6 @@ #include <common.h> -#ifdef CONFIG_DTT_LM75 #if !defined(CFG_EEPROM_PAGE_WRITE_ENABLE) || \ (CFG_EEPROM_PAGE_WRITE_BITS < 1) # error "CFG_EEPROM_PAGE_WRITE_ENABLE must be defined and CFG_EEPROM_PAGE_WRITE_BITS must be greater than 1 to use CONFIG_DTT_LM75" @@ -36,11 +35,14 @@ #include <i2c.h> #include <dtt.h> - /* * Device code */ #define DTT_I2C_DEV_CODE 0x48 /* ON Semi's LM75 device */ +#define DTT_READ_TEMP 0x0 +#define DTT_CONFIG 0x1 +#define DTT_TEMP_HYST 0x2 +#define DTT_TEMP_SET 0x3 int dtt_read(int sensor, int reg) { @@ -200,5 +202,3 @@ int dtt_get_temp(int sensor) } return (int)((int16_t) ret / 256); } /* dtt_get_temp() */ - -#endif /* CONFIG_DTT_LM75 */ diff --git a/drivers/hwmon/lm81.c b/drivers/hwmon/lm81.c index 03bc53d58c..9349eb6ff6 100644 --- a/drivers/hwmon/lm81.c +++ b/drivers/hwmon/lm81.c @@ -32,7 +32,6 @@ #include <common.h> -#ifdef CONFIG_DTT_LM81 #if !defined(CFG_EEPROM_PAGE_WRITE_ENABLE) || \ (CFG_EEPROM_PAGE_WRITE_BITS < 1) # error "CFG_EEPROM_PAGE_WRITE_ENABLE must be defined and CFG_EEPROM_PAGE_WRITE_BITS must be greater than 1 to use CONFIG_DTT_LM81" @@ -45,6 +44,11 @@ * Device code */ #define DTT_I2C_DEV_CODE 0x2c /* ON Semi's LM81 device */ +#define DTT_READ_TEMP 0x27 +#define DTT_CONFIG_TEMP 0x4b +#define DTT_TEMP_MAX 0x39 +#define DTT_TEMP_HYST 0x3a +#define DTT_CONFIG 0x40 int dtt_read(int sensor, int reg) { @@ -144,5 +148,3 @@ int dtt_get_temp(int sensor) return (TEMP_FROM_REG((val << 1) + ((tmpcnf & 0x80) >> 7))) / 10; } /* dtt_get_temp() */ - -#endif /* CONFIG_DTT_LM81 */ diff --git a/drivers/input/pc_keyb.c b/drivers/input/pc_keyb.c index 81d3e98934..33e7c5f124 100644 --- a/drivers/input/pc_keyb.c +++ b/drivers/input/pc_keyb.c @@ -64,7 +64,7 @@ static int kbd_read_data(void) int val; unsigned char status; - val=-1; + val = -1; status = kbd_read_status(); if (status & KBD_STAT_OBF) { val = kbd_read_input(); diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index c0ea97be70..12647ef986 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -301,11 +301,14 @@ static inline void flash_unmap(flash_info_t *info, flash_sect_t sect, /*----------------------------------------------------------------------- * make a proper sized command based on the port and chip widths */ -static void flash_make_cmd (flash_info_t * info, ulong cmd, void *cmdbuf) +static void flash_make_cmd(flash_info_t *info, u32 cmd, void *cmdbuf) { int i; int cword_offset; int cp_offset; +#if defined(__LITTLE_ENDIAN) || defined(CFG_WRITE_SWAPPED_DATA) + u32 cmd_le = cpu_to_le32(cmd); +#endif uchar val; uchar *cp = (uchar *) cmdbuf; @@ -313,12 +316,12 @@ static void flash_make_cmd (flash_info_t * info, ulong cmd, void *cmdbuf) cword_offset = (info->portwidth-i)%info->chipwidth; #if defined(__LITTLE_ENDIAN) || defined(CFG_WRITE_SWAPPED_DATA) cp_offset = info->portwidth - i; - val = *((uchar*)&cmd + cword_offset); + val = *((uchar*)&cmd_le + cword_offset); #else cp_offset = i - 1; - val = *((uchar*)&cmd + sizeof(ulong) - cword_offset - 1); + val = *((uchar*)&cmd + sizeof(u32) - cword_offset - 1); #endif - cp[cp_offset] = (cword_offset >= sizeof(ulong)) ? 0x00 : val; + cp[cp_offset] = (cword_offset >= sizeof(u32)) ? 0x00 : val; } } @@ -433,7 +436,7 @@ static ulong flash_read_long (flash_info_t * info, flash_sect_t sect, * Write a proper sized command to the correct address */ static void flash_write_cmd (flash_info_t * info, flash_sect_t sect, - uint offset, ulong cmd) + uint offset, u32 cmd) { void *addr; diff --git a/drivers/mtd/dataflash.c b/drivers/mtd/dataflash.c index 8247aa03b5..0ad48cdae9 100644 --- a/drivers/mtd/dataflash.c +++ b/drivers/mtd/dataflash.c @@ -54,6 +54,17 @@ int AT91F_DataflashInit (void) &dataflash_info[i].Desc); switch (dfcode) { + case AT45DB021: + dataflash_info[i].Device.pages_number = 1024; + dataflash_info[i].Device.pages_size = 263; + dataflash_info[i].Device.page_offset = 9; + dataflash_info[i].Device.byte_mask = 0x300; + dataflash_info[i].Device.cs = cs[i].cs; + dataflash_info[i].Desc.DataFlash_state = IDLE; + dataflash_info[i].logical_address = cs[i].addr; + dataflash_info[i].id = dfcode; + found[i] += dfcode;; + break; case AT45DB161: dataflash_info[i].Device.pages_number = 4096; dataflash_info[i].Device.pages_size = 528; @@ -162,7 +173,7 @@ void AT91F_DataflashSetEnv (void) if((env & FLAG_SETENV) == FLAG_SETENV) { start = dataflash_info[i].Device.area_list[j].start; - sprintf((char*) s,"%X",start); + sprintf((char*) s,"%lX",start); setenv((char*) area_list[part].label,(char*) s); } part++; @@ -178,6 +189,9 @@ void dataflash_print_info (void) if (dataflash_info[i].id != 0) { printf("DataFlash:"); switch (dataflash_info[i].id) { + case AT45DB021: + printf("AT45DB021\n"); + break; case AT45DB161: printf("AT45DB161\n"); break; diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c index 1484b0b696..0fff820803 100644 --- a/drivers/net/smc911x.c +++ b/drivers/net/smc911x.c @@ -597,7 +597,7 @@ int eth_init(bd_t *bd) val = reg_read(BYTE_TEST); if (val != 0x87654321) { - printf(DRIVERNAME ": Invalid chip endian 0x%08x\n", val); + printf(DRIVERNAME ": Invalid chip endian 0x%08lx\n", val); goto err_out; } @@ -606,7 +606,7 @@ int eth_init(bd_t *bd) if (chip_ids[i].id == val) break; } if (!chip_ids[i].id) { - printf(DRIVERNAME ": Unknown chip ID %04x\n", val); + printf(DRIVERNAME ": Unknown chip ID %04lx\n", val); goto err_out; } diff --git a/drivers/net/tsi108_eth.c b/drivers/net/tsi108_eth.c index 57c0dc3cea..2534097df5 100644 --- a/drivers/net/tsi108_eth.c +++ b/drivers/net/tsi108_eth.c @@ -899,7 +899,7 @@ static int tsi108_eth_send (struct eth_device *dev, status = le32_to_cpu(tx_descr->config_status); if ((status & DMA_DESCR_TX_OK) == 0) { #ifdef TX_PRINT_ERRORS - printf ("TX packet error: 0x%08x\n %s%s%s%s\n", status, + printf ("TX packet error: 0x%08lx\n %s%s%s%s\n", status, status & DMA_DESCR_TX_OK ? "tx error, " : "", status & DMA_DESCR_TX_RETRY_LIMIT ? "retry limit reached, " : "", @@ -959,7 +959,7 @@ static int tsi108_eth_recv (struct eth_device *dev) status = le32_to_cpu(rx_descr->config_status); if (status & DMA_DESCR_RX_BAD_FRAME) { #ifdef RX_PRINT_ERRORS - printf ("RX packet error: 0x%08x\n %s%s%s%s%s%s\n", + printf ("RX packet error: 0x%08lx\n %s%s%s%s%s%s\n", status, status & DMA_DESCR_RX_FRAME_IS_TYPE ? "too big, " : "", diff --git a/drivers/net/uli526x.c b/drivers/net/uli526x.c index 7145b72264..d87638c138 100644 --- a/drivers/net/uli526x.c +++ b/drivers/net/uli526x.c @@ -563,7 +563,7 @@ static int uli526x_rx_packet(struct eth_device *dev) /* error summary bit check */ if (rdes0 & 0x8000) { /* This is a error packet */ - printf("Eroor: rdes0: %lx\n", rdes0); + printf("Error: rdes0: %x\n", rdes0); } if (!(rdes0 & 0x8000) || diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c index 7dc33be899..a7afa908a2 100644 --- a/drivers/pci/fsl_pci_init.c +++ b/drivers/pci/fsl_pci_init.c @@ -59,8 +59,8 @@ fsl_pci_init(struct pci_controller *hose) pci_dev_t dev = PCI_BDF(busno,0,0); /* Initialize ATMU registers based on hose regions and flags */ - volatile pot_t *po=&pci->pot[1]; /* skip 0 */ - volatile pit_t *pi=&pci->pit[0]; /* ranges from: 3 to 1 */ + volatile pot_t *po = &pci->pot[1]; /* skip 0 */ + volatile pit_t *pi = &pci->pit[0]; /* ranges from: 3 to 1 */ #ifdef DEBUG int neg_link_w; diff --git a/drivers/pci/pci_sh4.c b/drivers/pci/pci_sh4.c index 1290c0a799..057b6ddc99 100644 --- a/drivers/pci/pci_sh4.c +++ b/drivers/pci/pci_sh4.c @@ -74,3 +74,15 @@ int pci_sh4_init(struct pci_controller *hose) hose->last_busno = pci_hose_scan(hose); return 0; } + +int pci_skip_dev(struct pci_controller *hose, pci_dev_t dev) +{ + return 0; +} + +#ifdef CONFIG_PCI_SCAN_SHOW +int pci_print_dev(struct pci_controller *hose, pci_dev_t dev) +{ + return 1; +} +#endif /* CONFIG_PCI_SCAN_SHOW */ diff --git a/drivers/rtc/ds1374.c b/drivers/rtc/ds1374.c index f6bb2965a4..1533b60f18 100644 --- a/drivers/rtc/ds1374.c +++ b/drivers/rtc/ds1374.c @@ -141,7 +141,7 @@ int rtc_get (struct rtc_time *tm){ rel = -1; } - DEBUGR ("Get RTC s since 1.1.1970: %d\n", time1); + DEBUGR ("Get RTC s since 1.1.1970: %ld\n", time1); to_tm(time1, tm); /* To Gregorian Date */ @@ -176,7 +176,7 @@ void rtc_set (struct rtc_time *tmp){ tmp->tm_mday, tmp->tm_hour, tmp->tm_min, tmp->tm_sec); - DEBUGR ("Set RTC s since 1.1.1970: %d (0x%02x)\n", time, time); + DEBUGR ("Set RTC s since 1.1.1970: %ld (0x%02lx)\n", time, time); /* write to RTC_TOD_CNT_BYTEn_ADDR */ for (i = 0; i <= 3; i++) { diff --git a/drivers/serial/mcfuart.c b/drivers/serial/mcfuart.c index 88f3eb10ab..5eb4f458f8 100644 --- a/drivers/serial/mcfuart.c +++ b/drivers/serial/mcfuart.c @@ -63,8 +63,8 @@ int serial_init(void) uart->umr = UART_UMR_SB_STOP_BITS_1; /* Setting up BaudRate */ - counter = (u32) (gd->bus_clk / (gd->baudrate)); - counter >>= 5; + counter = (u32) ((gd->bus_clk / 32) + (gd->baudrate / 2)); + counter = counter / gd->baudrate; /* write to CTUR: divide counter upper byte */ uart->ubg1 = (u8) ((counter & 0xff00) >> 8); diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c index 182ca2d149..8bbfcf9c0c 100644 --- a/drivers/serial/serial.c +++ b/drivers/serial/serial.c @@ -147,10 +147,11 @@ static int calc_divisor (NS16550_t port) /* Compute divisor value. Normally, we should simply return: * CFG_NS16550_CLK) / MODE_X_DIV / gd->baudrate - * but we need to round that value by adding 0.5 or 8/16. + * but we need to round that value by adding 0.5. * Rounding is especially important at high baud rates. */ - return (((16 * CFG_NS16550_CLK) / MODE_X_DIV / gd->baudrate) + 8) / 16; + return (CFG_NS16550_CLK + (gd->baudrate * (MODE_X_DIV / 2))) / + (MODE_X_DIV * gd->baudrate); } #if !defined(CONFIG_SERIAL_MULTI) diff --git a/drivers/serial/serial_xuartlite.c b/drivers/serial/serial_xuartlite.c index d678ab6b76..74546ce846 100644 --- a/drivers/serial/serial_xuartlite.c +++ b/drivers/serial/serial_xuartlite.c @@ -1,6 +1,8 @@ /* - * (C) Copyright 2004 Atmark Techno, Inc. + * (C) Copyright 2008 Michal Simek <monstr@monstr.eu> + * Clean driver and add xilinx constant from header file * + * (C) Copyright 2004 Atmark Techno, Inc. * Yasushi SHOJI <yashi@atmark-techno.com> * * See file CREDITS for list of people who contributed to this @@ -13,7 +15,7 @@ * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License @@ -23,19 +25,21 @@ */ #include <config.h> +#include <asm/io.h> #ifdef CONFIG_XILINX_UARTLITE -#include <asm/serial_xuartlite.h> +#define RX_FIFO_OFFSET 0 /* receive FIFO, read only */ +#define TX_FIFO_OFFSET 4 /* transmit FIFO, write only */ +#define STATUS_REG_OFFSET 8 /* status register, read only */ -/* FIXME: we should convert these to in32 and out32 */ -#define IO_WORD(offset) (*(volatile unsigned long *)(offset)) -#define IO_SERIAL(offset) IO_WORD(CONFIG_SERIAL_BASE + (offset)) +#define SR_TX_FIFO_FULL 0x08 /* transmit FIFO full */ +#define SR_RX_FIFO_VALID_DATA 0x01 /* data in receive FIFO */ +#define SR_RX_FIFO_FULL 0x02 /* receive FIFO full */ -#define IO_SERIAL_RX_FIFO IO_SERIAL(XUL_RX_FIFO_OFFSET) -#define IO_SERIAL_TX_FIFO IO_SERIAL(XUL_TX_FIFO_OFFSET) -#define IO_SERIAL_STATUS IO_SERIAL(XUL_STATUS_REG_OFFSET) -#define IO_SERIAL_CONTROL IO_SERIAL(XUL_CONTROL_REG_OFFSET) +#define UARTLITE_STATUS (CONFIG_SERIAL_BASE + STATUS_REG_OFFSET) +#define UARTLITE_TX_FIFO (CONFIG_SERIAL_BASE + TX_FIFO_OFFSET) +#define UARTLITE_RX_FIFO (CONFIG_SERIAL_BASE + RX_FIFO_OFFSET) int serial_init(void) { @@ -50,9 +54,10 @@ void serial_setbrg(void) void serial_putc(const char c) { - if (c == '\n') serial_putc('\r'); - while (IO_SERIAL_STATUS & XUL_SR_TX_FIFO_FULL); - IO_SERIAL_TX_FIFO = (unsigned char) (c & 0xff); + if (c == '\n') + serial_putc('\r'); + while (in_be32((u32 *) UARTLITE_STATUS) & SR_TX_FIFO_FULL); + out_be32((u32 *) UARTLITE_TX_FIFO, (unsigned char) (c & 0xff)); } void serial_puts(const char * s) @@ -64,13 +69,13 @@ void serial_puts(const char * s) int serial_getc(void) { - while (!(IO_SERIAL_STATUS & XUL_SR_RX_FIFO_VALID_DATA)); - return IO_SERIAL_RX_FIFO & 0xff; + while (!(in_be32((u32 *) UARTLITE_STATUS) & SR_RX_FIFO_VALID_DATA)); + return in_be32((u32 *) UARTLITE_RX_FIFO) & 0xff; } int serial_tstc(void) { - return (IO_SERIAL_STATUS & XUL_SR_RX_FIFO_VALID_DATA); + return (in_be32((u32 *) UARTLITE_STATUS) & SR_RX_FIFO_VALID_DATA); } #endif /* CONFIG_MICROBLZE */ diff --git a/drivers/serial/usbtty.c b/drivers/serial/usbtty.c index cc2bdac479..2bc5c3c838 100644 --- a/drivers/serial/usbtty.c +++ b/drivers/serial/usbtty.c @@ -529,8 +529,8 @@ int drv_usbtty_init (void) } snlen = strlen(sn); if (snlen > sizeof(serial_number) - 1) { - printf ("Warning: serial number %s is too long (%d > %d)\n", - sn, snlen, sizeof(serial_number) - 1); + printf ("Warning: serial number %s is too long (%d > %lu)\n", + sn, snlen, (ulong)(sizeof(serial_number) - 1)); snlen = sizeof(serial_number) - 1; } memcpy (serial_number, sn, snlen); diff --git a/drivers/usb/usbdcore.c b/drivers/usb/usbdcore.c index a621ce7a39..808da9faa5 100644 --- a/drivers/usb/usbdcore.c +++ b/drivers/usb/usbdcore.c @@ -546,21 +546,23 @@ void urb_append (urb_link * hd, struct urb *urb) * * NOTE: endpoint_address MUST contain a direction flag. */ -struct urb *usbd_alloc_urb (struct usb_device_instance *device, struct usb_endpoint_instance *endpoint) +struct urb *usbd_alloc_urb (struct usb_device_instance *device, + struct usb_endpoint_instance *endpoint) { struct urb *urb; - if( !(urb = (struct urb*)malloc(sizeof(struct urb))) ) { - usberr(" F A T A L: malloc(%u) FAILED!!!!", sizeof(struct urb)); - return NULL; + if (!(urb = (struct urb *) malloc (sizeof (struct urb)))) { + usberr (" F A T A L: malloc(%u) FAILED!!!!", + sizeof (struct urb)); + return NULL; } /* Fill in known fields */ - memset(urb, 0, sizeof(struct urb)); + memset (urb, 0, sizeof (struct urb)); urb->endpoint = endpoint; urb->device = device; - urb->buffer = (u8*)urb->buffer_data; - urb->buffer_length = sizeof(urb->buffer_data); + urb->buffer = (u8 *) urb->buffer_data; + urb->buffer_length = sizeof (urb->buffer_data); urb_link_init (&urb->link); diff --git a/drivers/video/mb862xx.c b/drivers/video/mb862xx.c index 9684cf3b7c..733d9a2acc 100644 --- a/drivers/video/mb862xx.c +++ b/drivers/video/mb862xx.c @@ -173,6 +173,8 @@ static void de_init (void) DE_WR_FIFO (0x09410000); DE_WR_FIFO (0x00000000); DE_WR_FIFO (pGD->winSizeY<<16 | pGD->winSizeX); + /* sync with SW access to framebuffer */ + de_wait (); } #if defined(CONFIG_VIDEO_CORALP) diff --git a/examples/test_burst.c b/examples/test_burst.c index 3157bc8b00..d8c5ed4a9e 100644 --- a/examples/test_burst.c +++ b/examples/test_burst.c @@ -278,7 +278,7 @@ static void test_error( p[2] = pattern; printf ("\nError at step %s, addr %08lx: read %08lx, pattern %08lx", - (unsigned long)step, addr, val, pattern); + step, (unsigned long)addr, val, pattern); } static void signal_init(void) diff --git a/fs/jffs2/jffs2_1pass.c b/fs/jffs2/jffs2_1pass.c index d1423c1cda..8a06777ae2 100644 --- a/fs/jffs2/jffs2_1pass.c +++ b/fs/jffs2/jffs2_1pass.c @@ -1213,16 +1213,18 @@ jffs2_1pass_build_lists(struct part_info * part) } else if (node->nodetype == JFFS2_NODETYPE_CLEANMARKER) { if (node->totlen != sizeof(struct jffs2_unknown_node)) printf("OOPS Cleanmarker has bad size " - "%d != %d\n", node->totlen, + "%d != %zu\n", + node->totlen, sizeof(struct jffs2_unknown_node)); } else if (node->nodetype == JFFS2_NODETYPE_PADDING) { if (node->totlen < sizeof(struct jffs2_unknown_node)) printf("OOPS Padding has bad size " - "%d < %d\n", node->totlen, + "%d < %zu\n", + node->totlen, sizeof(struct jffs2_unknown_node)); } else { - printf("Unknown node type: %x len %d " - "offset 0x%x\n", node->nodetype, + printf("Unknown node type: %x len %d offset 0x%x\n", + node->nodetype, node->totlen, offset); } offset += ((node->totlen + 3) & ~3); diff --git a/fs/jffs2/jffs2_nand_1pass.c b/fs/jffs2/jffs2_nand_1pass.c index d95f5513b9..3ce9c98255 100644 --- a/fs/jffs2/jffs2_nand_1pass.c +++ b/fs/jffs2/jffs2_nand_1pass.c @@ -864,16 +864,18 @@ jffs2_1pass_build_lists(struct part_info * part) } else if (node->nodetype == JFFS2_NODETYPE_CLEANMARKER) { if (node->totlen != sizeof(struct jffs2_unknown_node)) printf("OOPS Cleanmarker has bad size " - "%d != %d\n", node->totlen, + "%d != %zu\n", + node->totlen, sizeof(struct jffs2_unknown_node)); } else if (node->nodetype == JFFS2_NODETYPE_PADDING) { if (node->totlen < sizeof(struct jffs2_unknown_node)) printf("OOPS Padding has bad size " - "%d < %d\n", node->totlen, + "%d < %zu\n", + node->totlen, sizeof(struct jffs2_unknown_node)); } else { - printf("Unknown node type: %x len %d " - "offset 0x%x\n", node->nodetype, + printf("Unknown node type: %x len %d offset 0x%x\n", + node->nodetype, node->totlen, offset); } offset += ((node->totlen + 3) & ~3); diff --git a/include/asm-m68k/timer.h b/include/asm-m68k/timer.h index 030720c89f..1a5de05871 100644 --- a/include/asm-m68k/timer.h +++ b/include/asm-m68k/timer.h @@ -33,7 +33,7 @@ /****************************************************************************/ /* DMA Timer module registers */ typedef struct dtimer_ctrl { -#if defined(CONFIG_M5249) || defined(CONFIG_M5253) +#if defined(CONFIG_M5249) || defined(CONFIG_M5253) || defined(CONFIG_M5272) u16 tmr; /* 0x00 Mode register */ u16 res1; /* 0x02 */ u16 trr; /* 0x04 Reference register */ diff --git a/include/asm-microblaze/arch-microblaze/xbasic_types.h b/include/asm-microblaze/arch-microblaze/xbasic_types.h deleted file mode 100644 index 25012e6b95..0000000000 --- a/include/asm-microblaze/arch-microblaze/xbasic_types.h +++ /dev/null @@ -1,301 +0,0 @@ -/****************************************************************************** -* -* Author: Xilinx, Inc. -* -* -* This program is free software; you can redistribute it and/or modify it -* under the terms of the GNU General Public License as published by the -* Free Software Foundation; either version 2 of the License, or (at your -* option) any later version. -* -* -* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A -* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS -* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD, -* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE -* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING -* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION. -* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO -* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY -* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM -* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND -* FITNESS FOR A PARTICULAR PURPOSE. -* -* -* Xilinx hardware products are not intended for use in life support -* appliances, devices, or systems. Use in such applications is -* expressly prohibited. -* -* -* (c) Copyright 2002-2003 Xilinx Inc. -* All rights reserved. -* -* -* You should have received a copy of the GNU General Public License along -* with this program; if not, write to the Free Software Foundation, Inc., -* 675 Mass Ave, Cambridge, MA 02139, USA. -* -******************************************************************************/ -/*****************************************************************************/ -/** -* -* @file xbasic_types.h -* -* This file contains basic types for Xilinx software IP. These types do not -* follow the standard naming convention with respect to using the component -* name in front of each name because they are considered to be primitives. -* -* @note -* -* This file contains items which are architecture dependent. -* -* <pre> -* MODIFICATION HISTORY: -* -* Ver Who Date Changes -* ----- ---- -------- ----------------------------------------------- -* 1.00a rmm 12/14/01 First release -* rmm 05/09/03 Added "xassert always" macros to rid ourselves of diab -* compiler warnings -* </pre> -* -******************************************************************************/ - -#ifndef XBASIC_TYPES_H /* prevent circular inclusions */ -#define XBASIC_TYPES_H /* by using protection macros */ - -/***************************** Include Files *********************************/ - -/************************** Constant Definitions *****************************/ - -#ifndef TRUE -#define TRUE 1 -#endif -#ifndef FALSE -#define FALSE 0 -#endif - -#ifndef NULL -#define NULL 0 -#endif -/** Null */ - -#define XCOMPONENT_IS_READY 0x11111111 /* component has been initialized */ -#define XCOMPONENT_IS_STARTED 0x22222222 /* component has been started */ - -/* the following constants and declarations are for unit test purposes and are - * designed to be used in test applications. - */ -#define XTEST_PASSED 0 -#define XTEST_FAILED 1 - -#define XASSERT_NONE 0 -#define XASSERT_OCCURRED 1 - -extern unsigned int XAssertStatus; -extern void XAssert(char *, int); - -/**************************** Type Definitions *******************************/ - -/** @name Primitive types - * These primitive types are created for transportability. - * They are dependent upon the target architecture. - * @{ - */ -#include <linux/types.h> - -typedef struct { - u32 Upper; - u32 Lower; -} Xuint64; - -/* Xilinx's unsigned integer types */ -typedef u32 Xuint32; -typedef u16 Xuint16; -typedef u8 Xuint8; - -/* and signed integer types */ -typedef s32 Xint32; -typedef s16 Xint16; -typedef s8 Xint8; - -#ifndef NULL -#define NULL 0 -#endif - -typedef unsigned long Xboolean; -#define XNULL NULL - -#define XTRUE 1 -#define XFALSE 0 - -/*@}*/ - -/** - * This data type defines an interrupt handler for a device. - * The argument points to the instance of the component - */ -typedef void (*XInterruptHandler) (void *InstancePtr); - -/** - * This data type defines a callback to be invoked when an - * assert occurs. The callback is invoked only when asserts are enabled - */ -typedef void (*XAssertCallback) (char *FilenamePtr, int LineNumber); - -/***************** Macros (Inline Functions) Definitions *********************/ - -/*****************************************************************************/ -/** -* Return the most significant half of the 64 bit data type. -* -* @param x is the 64 bit word. -* -* @return -* -* The upper 32 bits of the 64 bit word. -* -* @note -* -* None. -* -******************************************************************************/ -#define XUINT64_MSW(x) ((x).Upper) - -/*****************************************************************************/ -/** -* Return the least significant half of the 64 bit data type. -* -* @param x is the 64 bit word. -* -* @return -* -* The lower 32 bits of the 64 bit word. -* -* @note -* -* None. -* -******************************************************************************/ -#define XUINT64_LSW(x) ((x).Lower) - -#ifndef NDEBUG - -/*****************************************************************************/ -/** -* This assert macro is to be used for functions that do not return anything -* (void). This in conjunction with the XWaitInAssert boolean can be used to -* accomodate tests so that asserts which fail allow execution to continue. -* -* @param expression is the expression to evaluate. If it evaluates to false, -* the assert occurs. -* -* @return -* -* Returns void unless the XWaitInAssert variable is true, in which case -* no return is made and an infinite loop is entered. -* -* @note -* -* None. -* -******************************************************************************/ -#define XASSERT_VOID(expression) \ -{ \ - if (expression) { \ - XAssertStatus = XASSERT_NONE; \ - } else { \ - XAssert(__FILE__, __LINE__); \ - XAssertStatus = XASSERT_OCCURRED; \ - return; \ - } \ -} - -/*****************************************************************************/ -/** -* This assert macro is to be used for functions that do return a value. This in -* conjunction with the XWaitInAssert boolean can be used to accomodate tests so -* that asserts which fail allow execution to continue. -* -* @param expression is the expression to evaluate. If it evaluates to false, -* the assert occurs. -* -* @return -* -* Returns 0 unless the XWaitInAssert variable is true, in which case -* no return is made and an infinite loop is entered. -* -* @note -* -* None. -* -******************************************************************************/ -#define XASSERT_NONVOID(expression) \ -{ \ - if (expression) { \ - XAssertStatus = XASSERT_NONE; \ - } else { \ - XAssert(__FILE__, __LINE__); \ - XAssertStatus = XASSERT_OCCURRED; \ - return 0; \ - } \ -} - -/*****************************************************************************/ -/** -* Always assert. This assert macro is to be used for functions that do not -* return anything (void). Use for instances where an assert should always -* occur. -* -* @return -* -* Returns void unless the XWaitInAssert variable is true, in which case -* no return is made and an infinite loop is entered. -* -* @note -* -* None. -* -******************************************************************************/ -#define XASSERT_VOID_ALWAYS() \ -{ \ - XAssert(__FILE__, __LINE__); \ - XAssertStatus = XASSERT_OCCURRED; \ - return; \ -} - -/*****************************************************************************/ -/** -* Always assert. This assert macro is to be used for functions that do return -* a value. Use for instances where an assert should always occur. -* -* @return -* -* Returns void unless the XWaitInAssert variable is true, in which case -* no return is made and an infinite loop is entered. -* -* @note -* -* None. -* -******************************************************************************/ -#define XASSERT_NONVOID_ALWAYS() \ -{ \ - XAssert(__FILE__, __LINE__); \ - XAssertStatus = XASSERT_OCCURRED; \ - return 0; \ -} - -#else - -#define XASSERT_VOID(expression) -#define XASSERT_VOID_ALWAYS() -#define XASSERT_NONVOID(expression) -#define XASSERT_NONVOID_ALWAYS() -#endif - -/************************** Function Prototypes ******************************/ - -void XAssertSetCallback(XAssertCallback Routine); - -#endif /* end of protection macro */ diff --git a/include/asm-microblaze/arch-microblaze/xio.h b/include/asm-microblaze/arch-microblaze/xio.h deleted file mode 100644 index 7eed327d4a..0000000000 --- a/include/asm-microblaze/arch-microblaze/xio.h +++ /dev/null @@ -1,63 +0,0 @@ -/* - * xio.h - * - * Defines XIo functions for Xilinx OCP in terms of Linux primitives - * - * Author: MontaVista Software, Inc. - * source@mvista.com - * - * 2002 (c) MontaVista, Software, Inc. This file is licensed under the terms - * of the GNU General Public License version 2. This program is licensed - * "as is" without any warranty of any kind, whether express or implied. - */ - -#ifndef XIO_H -#define XIO_H - -#include "xbasic_types.h" -#include <asm/io.h> - -typedef u32 XIo_Address; - -extern inline u8 -XIo_In8(XIo_Address InAddress) -{ - return (u8) in_8((volatile unsigned char *) InAddress); -} -extern inline u16 -XIo_In16(XIo_Address InAddress) -{ - return (u16) in_be16((volatile unsigned short *) InAddress); -} -extern inline u32 -XIo_In32(XIo_Address InAddress) -{ - return (u32) in_be32((volatile unsigned *) InAddress); -} -extern inline void -XIo_Out8(XIo_Address OutAddress, u8 Value) -{ - out_8((volatile unsigned char *) OutAddress, Value); -} -extern inline void -XIo_Out16(XIo_Address OutAddress, u16 Value) -{ - out_be16((volatile unsigned short *) OutAddress, Value); -} -extern inline void -XIo_Out32(XIo_Address OutAddress, u32 Value) -{ - out_be32((volatile unsigned *) OutAddress, Value); -} - -#define XIo_ToLittleEndian16(s,d) (*(u16*)(d) = cpu_to_le16((u16)(s))) -#define XIo_ToLittleEndian32(s,d) (*(u32*)(d) = cpu_to_le32((u32)(s))) -#define XIo_ToBigEndian16(s,d) (*(u16*)(d) = cpu_to_be16((u16)(s))) -#define XIo_ToBigEndian32(s,d) (*(u32*)(d) = cpu_to_be32((u32)(s))) - -#define XIo_FromLittleEndian16(s,d) (*(u16*)(d) = le16_to_cpu((u16)(s))) -#define XIo_FromLittleEndian32(s,d) (*(u32*)(d) = le32_to_cpu((u32)(s))) -#define XIo_FromBigEndian16(s,d) (*(u16*)(d) = be16_to_cpu((u16)(s))) -#define XIo_FromBigEndian32(s,d) (*(u32*)(d) = be32_to_cpu((u32)(s))) - -#endif /* XIO_H */ diff --git a/include/asm-microblaze/arch-microblaze/xuartlite_l.h b/include/asm-microblaze/arch-microblaze/xuartlite_l.h deleted file mode 100644 index b381a0d7b6..0000000000 --- a/include/asm-microblaze/arch-microblaze/xuartlite_l.h +++ /dev/null @@ -1,256 +0,0 @@ -/***************************************************************************** -* -* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" -* AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND -* SOLUTIONS FOR XILINX DEVICES. BY PROVIDING THIS DESIGN, CODE, -* OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, -* APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION -* THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT, -* AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE -* FOR YOUR IMPLEMENTATION. XILINX EXPRESSLY DISCLAIMS ANY -* WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE -* IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR -* REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF -* INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -* FOR A PARTICULAR PURPOSE. -* -* (c) Copyright 2002 Xilinx Inc. -* All rights reserved. -* -*****************************************************************************/ -/****************************************************************************/ -/** -* -* @file xuartlite_l.h -* -* This header file contains identifiers and low-level driver functions (or -* macros) that can be used to access the device. High-level driver functions -* are defined in xuartlite.h. -* -* <pre> -* MODIFICATION HISTORY: -* -* Ver Who Date Changes -* ----- ---- -------- ----------------------------------------------- -* 1.00b rpm 04/25/02 First release -* </pre> -* -*****************************************************************************/ - -#ifndef XUARTLITE_L_H /* prevent circular inclusions */ -#define XUARTLITE_L_H /* by using protection macros */ - -/***************************** Include Files ********************************/ - -#include "xbasic_types.h" -#include "xio.h" - -/************************** Constant Definitions ****************************/ - -/* UART Lite register offsets */ - -#define XUL_RX_FIFO_OFFSET 0 /* receive FIFO, read only */ -#define XUL_TX_FIFO_OFFSET 4 /* transmit FIFO, write only */ -#define XUL_STATUS_REG_OFFSET 8 /* status register, read only */ -#define XUL_CONTROL_REG_OFFSET 12 /* control register, write only */ - -/* control register bit positions */ - -#define XUL_CR_ENABLE_INTR 0x10 /* enable interrupt */ -#define XUL_CR_FIFO_RX_RESET 0x02 /* reset receive FIFO */ -#define XUL_CR_FIFO_TX_RESET 0x01 /* reset transmit FIFO */ - -/* status register bit positions */ - -#define XUL_SR_PARITY_ERROR 0x80 -#define XUL_SR_FRAMING_ERROR 0x40 -#define XUL_SR_OVERRUN_ERROR 0x20 -#define XUL_SR_INTR_ENABLED 0x10 /* interrupt enabled */ -#define XUL_SR_TX_FIFO_FULL 0x08 /* transmit FIFO full */ -#define XUL_SR_TX_FIFO_EMPTY 0x04 /* transmit FIFO empty */ -#define XUL_SR_RX_FIFO_FULL 0x02 /* receive FIFO full */ -#define XUL_SR_RX_FIFO_VALID_DATA 0x01 /* data in receive FIFO */ - -/* the following constant specifies the size of the FIFOs, the size of the - * FIFOs includes the transmitter and receiver such that it is the total number - * of bytes that the UART can buffer - */ -#define XUL_FIFO_SIZE 16 - -/* Stop bits are fixed at 1. Baud, parity, and data bits are fixed on a - * per instance basis - */ -#define XUL_STOP_BITS 1 - -/* Parity definitions - */ -#define XUL_PARITY_NONE 0 -#define XUL_PARITY_ODD 1 -#define XUL_PARITY_EVEN 2 - -/**************************** Type Definitions ******************************/ - -/***************** Macros (Inline Functions) Definitions ********************/ - -/***************************************************************************** -* -* Low-level driver macros and functions. The list below provides signatures -* to help the user use the macros. -* -* void XUartLite_mSetControlReg(u32 BaseAddress, u32 Mask) -* u32 XUartLite_mGetControlReg(u32 BaseAddress) -* u32 XUartLite_mGetStatusReg(u32 BaseAddress) -* -* Xboolean XUartLite_mIsReceiveEmpty(u32 BaseAddress) -* Xboolean XUartLite_mIsTransmitFull(u32 BaseAddress) -* Xboolean XUartLite_mIsIntrEnabled(u32 BaseAddress) -* -* void XUartLite_mEnableIntr(u32 BaseAddress) -* void XUartLite_mDisableIntr(u32 BaseAddress) -* -* void XUartLite_SendByte(u32 BaseAddress, u8 Data); -* u8 XUartLite_RecvByte(u32 BaseAddress); -* -*****************************************************************************/ - -/****************************************************************************/ -/** -* -* Set the contents of the control register. Use the XUL_CR_* constants defined -* above to create the bit-mask to be written to the register. -* -* @param BaseAddress is the base address of the device -* @param Mask is the 32-bit value to write to the control register -* -* @return None. -* -* @note None. -* -*****************************************************************************/ -#define XUartLite_mSetControlReg(BaseAddress, Mask) \ - XIo_Out32((BaseAddress) + XUL_CONTROL_REG_OFFSET, (Mask)) - - -/****************************************************************************/ -/** -* -* Get the contents of the control register. Use the XUL_CR_* constants defined -* above to interpret the bit-mask returned. -* -* @param BaseAddress is the base address of the device -* -* @return A 32-bit value representing the contents of the control register. -* -* @note None. -* -*****************************************************************************/ -#define XUartLite_mGetControlReg(BaseAddress) \ - XIo_In32((BaseAddress) + XUL_CONTROL_REG_OFFSET) - - -/****************************************************************************/ -/** -* -* Get the contents of the status register. Use the XUL_SR_* constants defined -* above to interpret the bit-mask returned. -* -* @param BaseAddress is the base address of the device -* -* @return A 32-bit value representing the contents of the status register. -* -* @note None. -* -*****************************************************************************/ -#define XUartLite_mGetStatusReg(BaseAddress) \ - XIo_In32((BaseAddress) + XUL_STATUS_REG_OFFSET) - - -/****************************************************************************/ -/** -* -* Check to see if the receiver has data. -* -* @param BaseAddress is the base address of the device -* -* @return XTRUE if the receiver is empty, XFALSE if there is data present. -* -* @note None. -* -*****************************************************************************/ -#define XUartLite_mIsReceiveEmpty(BaseAddress) \ - (!(XUartLite_mGetStatusReg((BaseAddress)) & XUL_SR_RX_FIFO_VALID_DATA)) - - -/****************************************************************************/ -/** -* -* Check to see if the transmitter is full. -* -* @param BaseAddress is the base address of the device -* -* @return XTRUE if the transmitter is full, XFALSE otherwise. -* -* @note None. -* -*****************************************************************************/ -#define XUartLite_mIsTransmitFull(BaseAddress) \ - (XUartLite_mGetStatusReg((BaseAddress)) & XUL_SR_TX_FIFO_FULL) - - -/****************************************************************************/ -/** -* -* Check to see if the interrupt is enabled. -* -* @param BaseAddress is the base address of the device -* -* @return XTRUE if the interrupt is enabled, XFALSE otherwise. -* -* @note None. -* -*****************************************************************************/ -#define XUartLite_mIsIntrEnabled(BaseAddress) \ - (XUartLite_mGetStatusReg((BaseAddress)) & XUL_SR_INTR_ENABLED) - - -/****************************************************************************/ -/** -* -* Enable the device interrupt. Preserve the contents of the control register. -* -* @param BaseAddress is the base address of the device -* -* @return None. -* -* @note None. -* -*****************************************************************************/ -#define XUartLite_mEnableIntr(BaseAddress) \ - XUartLite_mSetControlReg((BaseAddress), \ - XUartLite_mGetControlReg((BaseAddress)) | XUL_CR_ENABLE_INTR) - - -/****************************************************************************/ -/** -* -* Disable the device interrupt. Preserve the contents of the control register. -* -* @param BaseAddress is the base address of the device -* -* @return None. -* -* @note None. -* -*****************************************************************************/ -#define XUartLite_mDisableIntr(BaseAddress) \ - XUartLite_mSetControlReg((BaseAddress), \ - XUartLite_mGetControlReg((BaseAddress)) & ~XUL_CR_ENABLE_INTR) - - -/************************** Function Prototypes *****************************/ - -void XUartLite_SendByte(u32 BaseAddress, u8 Data); -u8 XUartLite_RecvByte(u32 BaseAddress); - - -#endif /* end of protection macro */ diff --git a/include/asm-microblaze/io.h b/include/asm-microblaze/io.h index aa37a60ce7..8804724bff 100644 --- a/include/asm-microblaze/io.h +++ b/include/asm-microblaze/io.h @@ -16,6 +16,8 @@ #ifndef __MICROBLAZE_IO_H__ #define __MICROBLAZE_IO_H__ +#include <asm/types.h> + #define IO_SPACE_LIMIT 0xFFFFFFFF #define readb(addr) \ diff --git a/include/asm-ppc/fsl_lbc.h b/include/asm-ppc/fsl_lbc.h index c4af7971b1..ea49ddc515 100644 --- a/include/asm-ppc/fsl_lbc.h +++ b/include/asm-ppc/fsl_lbc.h @@ -298,4 +298,13 @@ #define LCRR_CLKDIV_4 0x00000004 #define LCRR_CLKDIV_8 0x00000008 +/* LTEDR - Transfer Error Check Disable Register + */ +#define LTEDR_BMD 0x80000000 /* Bus monitor disable */ +#define LTEDR_PARD 0x20000000 /* Parity error checking disabled */ +#define LTEDR_WPD 0x04000000 /* Write protect error checking diable */ +#define LTEDR_WARA 0x00800000 /* Write-after-read-atomic error checking diable */ +#define LTEDR_RAWA 0x00400000 /* Read-after-write-atomic error checking disable */ +#define LTEDR_CSD 0x00080000 /* Chip select error checking disable */ + #endif /* __ASM_PPC_FSL_LBC_H */ diff --git a/include/asm-ppc/immap_86xx.h b/include/asm-ppc/immap_86xx.h index c03b4b8157..03a25c7944 100644 --- a/include/asm-ppc/immap_86xx.h +++ b/include/asm-ppc/immap_86xx.h @@ -1304,9 +1304,21 @@ typedef struct ccsr_gur { uint lynxdcr1; /* 0xe0f08 - Lynx debug control register 1*/ int res14[6]; uint ddrioovcr; /* 0xe0f24 - DDR IO Overdrive Control register */ - char res15[61656]; + char res15[216]; } ccsr_gur_t; +/* + * Watchdog register block(0xe_4000-0xe_4fff) + */ +typedef struct ccsr_wdt { + uint res0; + uint swcrr; /* System watchdog control register */ + uint swcnr; /* System watchdog count register */ + char res1[2]; + ushort swsrr; /* System watchdog service register */ + char res2[4080]; +} ccsr_wdt_t; + typedef struct immap { ccsr_local_mcm_t im_local_mcm; ccsr_ddr_t im_ddr1; @@ -1330,6 +1342,8 @@ typedef struct immap { char res5[389120]; ccsr_rio_t im_rio; ccsr_gur_t im_gur; + char res6[12288]; + ccsr_wdt_t im_wdt; } immap_t; extern immap_t *immr; diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h index 10fd478bab..e617868091 100644 --- a/include/asm-ppc/processor.h +++ b/include/asm-ppc/processor.h @@ -426,6 +426,7 @@ /* e500 definitions */ #define SPRN_L1CFG0 0x203 /* L1 Cache Configuration Register 0 */ #define SPRN_L1CFG1 0x204 /* L1 Cache Configuration Register 1 */ +#define SPRN_L2CFG0 0x207 /* L2 Cache Configuration Register 0 */ #define SPRN_L1CSR0 0x3f2 /* L1 Data Cache Control and Status Register 0 */ #define L1CSR0_CPE 0x00010000 /* Data Cache Parity Enable */ #define L1CSR0_DCFI 0x00000002 /* Data Cache Flash Invalidate */ @@ -434,6 +435,21 @@ #define L1CSR1_CPE 0x00010000 /* Instruction Cache Parity Enable */ #define L1CSR1_ICFI 0x00000002 /* Instruction Cache Flash Invalidate */ #define L1CSR1_ICE 0x00000001 /* Instruction Cache Enable */ +#define SPRN_L1CSR2 0x25e /* L1 Data Cache Control and Status Register 2 */ +#define SPRN_L2CSR0 0x3f9 /* L2 Data Cache Control and Status Register 0 */ +#define L2CSR0_L2E 0x80000000 /* L2 Cache Enable */ +#define L2CSR0_L2PE 0x40000000 /* L2 Cache Parity/ECC Enable */ +#define L2CSR0_L2WP 0x1c000000 /* L2 I/D Way Partioning */ +#define L2CSR0_L2CM 0x03000000 /* L2 Cache Coherency Mode */ +#define L2CSR0_L2FI 0x00200000 /* L2 Cache Flash Invalidate */ +#define L2CSR0_L2IO 0x00100000 /* L2 Cache Instruction Only */ +#define L2CSR0_L2DO 0x00010000 /* L2 Cache Data Only */ +#define L2CSR0_L2REP 0x00003000 /* L2 Line Replacement Algo */ +#define L2CSR0_L2FL 0x00000800 /* L2 Cache Flush */ +#define L2CSR0_L2LFC 0x00000400 /* L2 Cache Lock Flash Clear */ +#define L2CSR0_L2LOA 0x00000080 /* L2 Cache Lock Overflow Allocate */ +#define L2CSR0_L2LO 0x00000020 /* L2 Cache Lock Overflow */ +#define SPRN_L2CSR1 0x3fa /* L2 Data Cache Control and Status Register 1 */ #define SPRN_MMUCSR0 0x3f4 /* MMU control and status register 0 */ #define SPRN_MAS0 0x270 /* MMU Assist Register 0 */ @@ -624,8 +640,12 @@ #define MCSRR1 SPRN_MCSRR1 #define L1CSR0 SPRN_L1CSR0 #define L1CSR1 SPRN_L1CSR1 +#define L1CSR2 SPRN_L1CSR2 #define L1CFG0 SPRN_L1CFG0 #define L1CFG1 SPRN_L1CFG1 +#define L2CFG0 SPRN_L2CFG0 +#define L2CSR0 SPRN_L2CSR0 +#define L2CSR1 SPRN_L2CSR1 #define MCSR SPRN_MCSR #define MMUCSR0 SPRN_MMUCSR0 #define BUCSR SPRN_BUCSR @@ -885,6 +905,15 @@ /* Some parts define SVR[0:23] as the SOC version */ #define SVR_SOC_VER(svr) (((svr) >> 8) & 0xFFFFFF) /* SOC Version fields */ +/* whether MPC8xxxE (i.e. has SEC) */ +#if defined(CONFIG_MPC85xx) +#define IS_E_PROCESSOR(svr) (svr & 0x80000) +#else +#if defined(CONFIG_MPC83XX) +#define IS_E_PROCESSOR(spridr) (!(spridr & 0x00010000)) +#endif +#endif + /* * SVR_SOC_VER() Version Values */ diff --git a/include/configs/EB+MCF-EV123.h b/include/configs/EB+MCF-EV123.h index 417099e037..324eb6ce15 100644 --- a/include/configs/EB+MCF-EV123.h +++ b/include/configs/EB+MCF-EV123.h @@ -84,6 +84,8 @@ #define CONFIG_CMD_MII #define CONFIG_CMD_NET +#define CONFIG_MCFTMR + #define CONFIG_MCFFEC #ifdef CONFIG_MCFFEC # define CONFIG_NET_MULTI 1 diff --git a/include/configs/M5475EVB.h b/include/configs/M5475EVB.h index a19c342270..e8804b5660 100644 --- a/include/configs/M5475EVB.h +++ b/include/configs/M5475EVB.h @@ -303,9 +303,9 @@ #define CFG_CS0_CTRL 0x00101980 #ifdef CFG_NOR1SZ -#define CFG_CS1_BASE 0xF8000000 +#define CFG_CS1_BASE 0xE0000000 #define CFG_CS1_MASK (((CFG_NOR1SZ << 20) - 1) & 0xFFFF0001) -#define CFG_CS1_CTRL 0x00000D80 +#define CFG_CS1_CTRL 0x00101D80 #endif #endif /* _M5475EVB_H */ diff --git a/include/configs/M5485EVB.h b/include/configs/M5485EVB.h index b73e2e006d..0f957fff58 100644 --- a/include/configs/M5485EVB.h +++ b/include/configs/M5485EVB.h @@ -289,9 +289,9 @@ #define CFG_CS0_CTRL 0x00101980 #ifdef CFG_NOR1SZ -#define CFG_CS1_BASE 0xF8000000 +#define CFG_CS1_BASE 0xE0000000 #define CFG_CS1_MASK (((CFG_NOR1SZ << 20) - 1) & 0xFFFF0001) -#define CFG_CS1_CTRL 0x00000D80 +#define CFG_CS1_CTRL 0x00101D80 #endif #endif /* _M5485EVB_H */ diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index 669f4d7c8b..091fd2e870 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -148,8 +148,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); */ #define CFG_BOOT_BLOCK 0xfc000000 /* boot TLB */ -#define CFG_LBC_CACHE_BASE 0xf0000000 /* Localbus cacheable */ - #define CFG_FLASH_BASE 0xff800000 /* start of FLASH 8M */ #define CFG_BR0_PRELIM 0xff801001 @@ -158,10 +156,10 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CFG_OR0_PRELIM 0xff806e65 #define CFG_OR1_PRELIM 0xff806e65 -#define CFG_FLASH_BANKS_LIST {0xfe800000,CFG_FLASH_BASE} +#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE} #define CFG_FLASH_QUIET_TEST -#define CFG_MAX_FLASH_BANKS 2 /* number of banks */ +#define CFG_MAX_FLASH_BANKS 1 /* number of banks */ #define CFG_MAX_FLASH_SECT 128 /* sectors per device */ #undef CFG_FLASH_CHECKSUM #define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ @@ -203,30 +201,18 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* define to use L1 as initial stack */ -#define CONFIG_L1_INIT_RAM 1 -#define CFG_INIT_L1_LOCK 1 -#define CFG_INIT_L1_ADDR 0xf4010000 /* Initial L1 address */ -#define CFG_INIT_L1_END 0x00004000 /* End of used area in RAM */ - -/* define to use L2SRAM as initial stack */ -#undef CONFIG_L2_INIT_RAM -#define CFG_INIT_L2_ADDR 0xf8fc0000 -#define CFG_INIT_L2_END 0x00040000 /* End of used area in RAM */ - -#ifdef CONFIG_L1_INIT_RAM -#define CFG_INIT_RAM_ADDR CFG_INIT_L1_ADDR -#define CFG_INIT_RAM_END CFG_INIT_L1_END -#else -#define CFG_INIT_RAM_ADDR CFG_INIT_L2_ADDR -#define CFG_INIT_RAM_END CFG_INIT_L2_END -#endif +#define CONFIG_L1_INIT_RAM +#define CFG_INIT_RAM_LOCK 1 +#define CFG_INIT_RAM_ADDR 0xf4010000 /* Initial L1 address */ +#define CFG_INIT_RAM_END 0x00004000 /* End of used area in RAM */ + #define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET #define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ -#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ +#define CFG_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ /* Serial Port - controlled on board with jumper J8 * open - index 2 @@ -314,6 +300,26 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #if defined(CONFIG_PCI) +/*PCIE video card used*/ +#define VIDEO_IO_OFFSET CFG_PCIE2_IO_PHYS + +/*PCI video card used*/ +/*#define VIDEO_IO_OFFSET CFG_PCI1_IO_PHYS*/ + +/* video */ +#define CONFIG_VIDEO + +#if defined(CONFIG_VIDEO) +#define CONFIG_BIOSEMU +#define CONFIG_CFB_CONSOLE +#define CONFIG_VIDEO_SW_CURSOR +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_ATI_RADEON_FB +#define CONFIG_VIDEO_LOGO +/*#define CONFIG_CONSOLE_CURSOR*/ +#define CFG_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET +#endif + #define CONFIG_NET_MULTI #define CONFIG_PCI_PNP /* do pci plug-and-play */ @@ -382,7 +388,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #if CFG_MONITOR_BASE > 0xfff80000 #define CFG_ENV_ADDR 0xfff80000 #else -#define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) +#define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x70000) #endif #define CFG_ENV_SIZE 0x2000 #define CFG_ENV_SECT_SIZE 0x10000 /* 64K (one sector) */ diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index edf8525179..2721216272 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -538,29 +538,29 @@ #define CONFIG_BAUDRATE 115200 #define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "consoledev=ttyCPM\0" \ - "ramdiskaddr=1000000\0" \ - "ramdiskfile=your.ramdisk.u-boot\0" \ - "fdtaddr=400000\0" \ - "fdtfile=mpc8560ads.dtb\0" + "netdev=eth0\0" \ + "consoledev=ttyCPM\0" \ + "ramdiskaddr=1000000\0" \ + "ramdiskfile=your.ramdisk.u-boot\0" \ + "fdtaddr=400000\0" \ + "fdtfile=mpc8560ads.dtb\0" #define CONFIG_NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" #define CONFIG_RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" #define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h index fc168909e7..06899b1aff 100644 --- a/include/configs/MPC8610HPCD.h +++ b/include/configs/MPC8610HPCD.h @@ -140,11 +140,11 @@ #endif #endif -#define CFG_ID_EEPROM -#ifdef CFG_ID_EEPROM #define CONFIG_ID_EEPROM -#endif -#define ID_EEPROM_ADDR 0x57 +#define CFG_I2C_EEPROM_NXID +#define CFG_ID_EEPROM +#define CFG_I2C_EEPROM_ADDR 0x57 +#define CFG_I2C_EEPROM_ADDR_LEN 1 #define CFG_FLASH_BASE 0xf0000000 /* start of FLASH 128M */ @@ -485,7 +485,8 @@ #endif -#undef CONFIG_WATCHDOG /* watchdog disabled */ +#define CONFIG_WATCHDOG /* watchdog enabled */ +#define CFG_WATCHDOG_FREQ 5000 /* Feed interval, 5s */ /*DIU Configuration*/ #define DIU_CONNECT_TO_DVI /* DIU controller connects to DVI encoder*/ diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 455e154222..cd354948a1 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -152,11 +152,11 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CFG_DDR_CS5_BNDS 0x00000FFF /* Not done */ #endif -#define CFG_ID_EEPROM 1 -#ifdef CFG_ID_EEPROM #define CONFIG_ID_EEPROM -#endif -#define ID_EEPROM_ADDR 0x57 +#define CFG_I2C_EEPROM_NXID +#define CFG_ID_EEPROM +#define CFG_I2C_EEPROM_ADDR 0x57 +#define CFG_I2C_EEPROM_ADDR_LEN 1 /* * In MPC8641HPCN, allocate 16MB flash spaces at fe000000 and ff000000. diff --git a/include/configs/MVBC_P.h b/include/configs/MVBC_P.h new file mode 100644 index 0000000000..04580b7a26 --- /dev/null +++ b/include/configs/MVBC_P.h @@ -0,0 +1,316 @@ +/* + * (C) Copyright 2003-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2004-2008 + * Matrix-Vision GmbH, andre.schwarz@matrix-vision.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <version.h> + +#define CONFIG_MPC5xxx 1 +#define CONFIG_MPC5200 1 + +#define CFG_MPC5XXX_CLKIN 33000000 + +#define BOOTFLAG_COLD 0x01 +#define BOOTFLAG_WARM 0x02 + +#define CONFIG_MISC_INIT_R 1 + +#define CFG_CACHELINE_SIZE 32 +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 +#endif + +#define CONFIG_PSC_CONSOLE 1 +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200, 230400} + +#define CONFIG_PCI 1 +#define CONFIG_PCI_PNP 1 +#undef CONFIG_PCI_SCAN_SHOW +#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 + +#define CONFIG_PCI_MEM_BUS 0x40000000 +#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS +#define CONFIG_PCI_MEM_SIZE 0x10000000 + +#define CONFIG_PCI_IO_BUS 0x50000000 +#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS +#define CONFIG_PCI_IO_SIZE 0x01000000 + +#define CFG_XLB_PIPELINING 1 +#define CONFIG_HIGH_BATS 1 + +#define MV_CI mvBlueCOUGAR-P +#define MV_VCI mvBlueCOUGAR-P +#define MV_FPGA_DATA 0xff860000 +#define MV_FPGA_SIZE 0x0003c886 +#define MV_KERNEL_ADDR 0xffc00000 +#define MV_INITRD_ADDR 0xff900000 +#define MV_INITRD_LENGTH 0x00300000 +#define MV_SCRATCH_ADDR 0x00000000 +#define MV_SCRATCH_LENGTH MV_INITRD_LENGTH +#define MV_AUTOSCR_ADDR 0xff840000 +#define MV_AUTOSCR_ADDR2 0xff850000 +#define MV_DTB_ADDR 0xfffc0000 + +#define CONFIG_SHOW_BOOT_PROGRESS 1 + +#define MV_KERNEL_ADDR_RAM 0x00100000 +#define MV_DTB_ADDR_RAM 0x00600000 +#define MV_INITRD_ADDR_RAM 0x01000000 + +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 + +#define OF_CPU "PowerPC,5200@0" +#define OF_SOC "soc5200@f0000000" +#define OF_TBCLK (bd->bi_busfreq / 4) +#define MV_DTB_NAME mvbc-p.dtb +#define CONFIG_OF_STDOUT_VIA_ALIAS 1 + +/* + * Supported commands + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_PCI +#define CONFIG_CMD_FPGA + +#undef CONFIG_WATCHDOG + +#define CONFIG_BOOTP_VENDOREX +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_NTPSERVER +#define CONFIG_BOOTP_RANDOM_DELAY +#define CONFIG_BOOTP_SEND_HOSTNAME + +/* + * Autoboot + */ +#define CONFIG_BOOTDELAY 2 +#define CONFIG_AUTOBOOT_KEYED +#define CONFIG_AUTOBOOT_STOP_STR "s" +#define CONFIG_ZERO_BOOTDELAY_CHECK +#define CONFIG_RESET_TO_RETRY 1000 + +#define CONFIG_BOOTCOMMAND "if imi ${autoscr_addr}; \ + then autoscr ${autoscr_addr}; \ + else autoscr ${autoscr_addr2}; \ + fi;" + +#define CONFIG_BOOTARGS "root=/dev/ram ro rootfstype=squashfs" +#define CONFIG_ENV_OVERWRITE + +#define XMK_STR(x) #x +#define MK_STR(x) XMK_STR(x) + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "console_nr=0\0" \ + "console=yes\0" \ + "stdin=serial\0" \ + "stdout=serial\0" \ + "stderr=serial\0" \ + "fpga=0\0" \ + "fpgadata=" MK_STR(MV_FPGA_DATA) "\0" \ + "fpgadatasize=" MK_STR(MV_FPGA_SIZE) "\0" \ + "autoscr_addr=" MK_STR(MV_AUTOSCR_ADDR) "\0" \ + "autoscr_addr2=" MK_STR(MV_AUTOSCR_ADDR2) "\0" \ + "mv_kernel_addr=" MK_STR(MV_KERNEL_ADDR) "\0" \ + "mv_kernel_addr_ram=" MK_STR(MV_KERNEL_ADDR_RAM) "\0" \ + "mv_initrd_addr=" MK_STR(MV_INITRD_ADDR) "\0" \ + "mv_initrd_addr_ram=" MK_STR(MV_INITRD_ADDR_RAM) "\0" \ + "mv_initrd_length=" MK_STR(MV_INITRD_LENGTH) "\0" \ + "mv_dtb_addr=" MK_STR(MV_DTB_ADDR) "\0" \ + "mv_dtb_addr_ram=" MK_STR(MV_DTB_ADDR_RAM) "\0" \ + "dtb_name=" MK_STR(MV_DTB_NAME) "\0" \ + "mv_scratch_addr=" MK_STR(MV_SCRATCH_ADDR) "\0" \ + "mv_scratch_length=" MK_STR(MV_SCRATCH_LENGTH) "\0" \ + "mv_version=" U_BOOT_VERSION "\0" \ + "dhcp_client_id=" MK_STR(MV_CI) "\0" \ + "dhcp_vendor-class-identifier=" MK_STR(MV_VCI) "\0" \ + "netretry=no\0" \ + "use_static_ipaddr=no\0" \ + "static_ipaddr=192.168.90.10\0" \ + "static_netmask=255.255.255.0\0" \ + "static_gateway=0.0.0.0\0" \ + "initrd_name=uInitrd.mvbc-p-rfs\0" \ + "zcip=no\0" \ + "netboot=yes\0" \ + "mvtest=Ff\0" \ + "tried_bootfromflash=no\0" \ + "tried_bootfromnet=no\0" \ + "use_dhcp=yes\0" \ + "gev_start=yes\0" \ + "mvbcdma_debug=0\0" \ + "mvbcia_debug=0\0" \ + "propdev_debug=0\0" \ + "gevss_debug=0\0" \ + "watchdog=1\0" \ + "" + +#undef XMK_STR +#undef MK_STR + +/* + * IPB Bus clocking configuration. + */ +#define CFG_IPBCLK_EQUALS_XLBCLK +#define CFG_PCICLK_EQUALS_IPBCLK_DIV2 + +/* + * Flash configuration + */ +#undef CONFIG_FLASH_16BIT +#define CFG_FLASH_CFI +#define CFG_FLASH_CFI_DRIVER +#define CFG_FLASH_CFI_AMD_RESET 1 +#define CFG_FLASH_EMPTY_INFO + +#define CFG_FLASH_ERASE_TOUT 50000 +#define CFG_FLASH_WRITE_TOUT 1000 + +#define CFG_MAX_FLASH_BANKS 1 +#define CFG_MAX_FLASH_SECT 256 + +#define CFG_LOWBOOT +#define CFG_FLASH_BASE TEXT_BASE +#define CFG_FLASH_SIZE 0x00800000 + +/* + * Environment settings + */ +#define CFG_ENV_IS_IN_FLASH +#undef CFG_FLASH_PROTECTION + +#define CFG_ENV_ADDR 0xFFFE0000 +#define CFG_ENV_SIZE 0x10000 +#define CFG_ENV_SECT_SIZE 0x10000 +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR+CFG_ENV_SIZE) +#define CFG_ENV_SIZE_REDUND CFG_ENV_SIZE + +/* + * Memory map + */ +#define CFG_MBAR 0xF0000000 +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_DEFAULT_MBAR 0x80000000 + +#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM +#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE + +#define CFG_GBL_DATA_SIZE 128 +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_BASE TEXT_BASE +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +#define CFG_RAMBOOT 1 +#endif + +/* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */ +#define CFG_MONITOR_LEN (512 << 10) +#define CFG_MALLOC_LEN (512 << 10) +#define CFG_BOOTMAPSZ (8 << 20) + +/* + * Ethernet configuration + */ +#define CONFIG_NET_MULTI +#define CONFIG_NET_RETRY_COUNT 5 + +#define CONFIG_E1000 +#define CONFIG_E1000_FALLBACK_MAC 0xb6b445ebfbc0 +#undef CONFIG_MPC5xxx_FEC +#undef CONFIG_PHY_ADDR +#define CONFIG_NETDEV eth0 + +/* + * Miscellaneous configurable options + */ +#define CFG_HUSH_PARSER +#define CONFIG_CMDLINE_EDITING +#define CFG_PROMPT_HUSH_PS2 "> " +#undef CFG_LONGHELP +#define CFG_PROMPT "=> " +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 +#else +#define CFG_CBSIZE 256 +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) +#define CFG_MAXARGS 16 +#define CFG_BARGSIZE CFG_CBSIZE + +#define CFG_MEMTEST_START 0x00800000 +#define CFG_MEMTEST_END 0x02f00000 + +#define CFG_HZ 1000 + +/* default load address */ +#define CFG_LOAD_ADDR 0x02000000 +/* default location for tftp and bootm */ +#define CONFIG_LOADADDR 0x00200000 + +/* + * Various low-level settings + */ +#define CFG_GPS_PORT_CONFIG 0x20000004 + +#define CFG_HID0_INIT (HID0_ICE | HID0_ICFI) +#define CFG_HID0_FINAL HID0_ICE + +#define CFG_BOOTCS_START CFG_FLASH_BASE +#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE +#define CFG_BOOTCS_CFG 0x00047800 +#define CFG_CS0_START CFG_FLASH_BASE +#define CFG_CS0_SIZE CFG_FLASH_SIZE + +#define CFG_CS_BURST 0x000000f0 +#define CFG_CS_DEADCYCLE 0x33333303 + +#define CFG_RESET_ADDRESS 0x00000100 + +#undef FPGA_DEBUG +#undef CFG_FPGA_PROG_FEEDBACK +#define CONFIG_FPGA CFG_ALTERA_CYCLON2 +#define CONFIG_FPGA_ALTERA 1 +#define CONFIG_FPGA_CYCLON2 1 +#define CONFIG_FPGA_COUNT 1 + +#endif diff --git a/include/configs/ads5121.h b/include/configs/ads5121.h index 4226529eb7..f104e68f1b 100644 --- a/include/configs/ads5121.h +++ b/include/configs/ads5121.h @@ -27,6 +27,7 @@ #ifndef __CONFIG_H #define __CONFIG_H +#define CONFIG_ADS5121 1 /* * Memory map for the ADS5121 board: * @@ -57,7 +58,12 @@ /* CONFIG_PCI is defined at config time */ +#ifdef CONFIG_ADS5121_REV2 #define CFG_MPC512X_CLKIN 66000000 /* in Hz */ +#else +#define CFG_MPC512X_CLKIN 33333333 /* in Hz */ +#define CONFIG_PCI +#endif #define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f() */ #define CONFIG_MISC_INIT_R @@ -71,7 +77,11 @@ /* * DDR Setup - manually set all parameters as there's no SPD etc. */ +#ifdef CONFIG_ADS5121_REV2 #define CFG_DDR_SIZE 256 /* MB */ +#else +#define CFG_DDR_SIZE 512 /* MB */ +#endif #define CFG_DDR_BASE 0x00000000 /* DDR is system memory*/ #define CFG_SDRAM_BASE CFG_DDR_BASE @@ -119,14 +129,20 @@ * [09:05] DRAM tRP: * [04:00] DRAM tRPA */ - +#ifdef CONFIG_ADS5121_REV2 #define CFG_MDDRC_SYS_CFG 0xF8604A00 #define CFG_MDDRC_SYS_CFG_RUN 0xE8604A00 +#define CFG_MDDRC_TIME_CFG1 0x54EC1168 +#define CFG_MDDRC_TIME_CFG2 0x35210864 +#else +#define CFG_MDDRC_SYS_CFG 0xFA804A00 +#define CFG_MDDRC_SYS_CFG_RUN 0xEA804A00 +#define CFG_MDDRC_TIME_CFG1 0x68EC1168 +#define CFG_MDDRC_TIME_CFG2 0x34310864 +#endif #define CFG_MDDRC_SYS_CFG_EN 0xF0000000 #define CFG_MDDRC_TIME_CFG0 0x00003D2E #define CFG_MDDRC_TIME_CFG0_RUN 0x06183D2E -#define CFG_MDDRC_TIME_CFG1 0x54EC1168 -#define CFG_MDDRC_TIME_CFG2 0x35210864 #define CFG_MICRON_NOP 0x01380000 #define CFG_MICRON_PCHG_ALL 0x01100400 @@ -165,12 +181,17 @@ /* * NOR FLASH on the Local Bus */ +#undef CONFIG_BKUP_FLASH #define CFG_FLASH_CFI /* use the Common Flash Interface */ #define CFG_FLASH_CFI_DRIVER /* use the CFI driver */ +#ifdef CONFIG_BKUP_FLASH +#define CFG_FLASH_BASE 0xFF800000 /* start of FLASH */ +#define CFG_FLASH_SIZE 0x00800000 /* max flash size in bytes */ +#else #define CFG_FLASH_BASE 0xFC000000 /* start of FLASH */ #define CFG_FLASH_SIZE 0x04000000 /* max flash size in bytes */ +#endif #define CFG_FLASH_USE_BUFFER_WRITE - #define CFG_MAX_FLASH_BANKS 1 /* number of banks */ #define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE} #define CFG_MAX_FLASH_SECT 256 /* max sectors per device */ @@ -286,14 +307,13 @@ #define CONFIG_NET_MULTI #define CONFIG_PHY_ADDR 0x1 #define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_FEC_AN_TIMEOUT 1 -#if 0 /* * Configure on-board RTC */ -#define CONFIG_RTC_DS1374 /* use ds1374 rtc via i2c */ +#define CONFIG_RTC_M41T62 /* use M41T62 rtc via i2 */ #define CFG_I2C_RTC_ADDR 0x68 /* at address 0x68 */ -#endif /* * Environment @@ -302,7 +322,11 @@ /* This has to be a multiple of the Flash sector size */ #define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) #define CFG_ENV_SIZE 0x2000 +#ifdef CONFIG_BKUP_FLASH +#define CFG_ENV_SECT_SIZE 0x20000 /* one sector (256K) for env */ +#else #define CFG_ENV_SECT_SIZE 0x40000 /* one sector (256K) for env */ +#endif /* Address and size of Redundant Environment Sector */ #define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE) @@ -321,6 +345,7 @@ #define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO #define CONFIG_CMD_EEPROM +#define CONFIG_CMD_DATE #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI diff --git a/include/configs/davinci_sffsdr.h b/include/configs/davinci_sffsdr.h index 0e49e6c159..7c860e5f00 100644 --- a/include/configs/davinci_sffsdr.h +++ b/include/configs/davinci_sffsdr.h @@ -137,6 +137,7 @@ #define CONFIG_CMD_SAVES #define CONFIG_CMD_NAND #define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF /* Needed to load Integrity kernel. */ #undef CONFIG_CMD_BDI #undef CONFIG_CMD_FPGA #undef CONFIG_CMD_SETGETDCR diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h index 4a9cadbc73..a2f365042c 100644 --- a/include/configs/pxa255_idp.h +++ b/include/configs/pxa255_idp.h @@ -126,7 +126,10 @@ #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTCOMMAND "bootm 40000" #define CONFIG_BOOTARGS "root=/dev/mtdblock2 rootfstype=cramfs console=ttyS0,115200" -#define CONFIG_CMDLINE_TAG + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +/* #define CONFIG_INITRD_TAG 1 */ /* * Current memory map for Vibren supplied Linux images: diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h index 146eafe9cc..6345cce635 100644 --- a/include/configs/sbc8560.h +++ b/include/configs/sbc8560.h @@ -24,8 +24,8 @@ * MA 02111-1307 USA */ -/* mpc8560ads board configuration file */ -/* please refer to doc/README.mpc85xx for more info */ +/* sbc8560 board configuration file */ +/* please refer to doc/README.sbc8560 for more info */ /* make sure you change the MAC address and other network params first, * search for CONFIG_ETHADDR,CONFIG_SERVERIP,etc in this file */ @@ -102,11 +102,11 @@ #define CFG_SDRAM_SIZE 512 /* DDR is 512MB */ #define SPD_EEPROM_ADDRESS 0x55 /* DDR DIMM */ -#undef CONFIG_DDR_ECC /* only for ECC DDR module */ -#undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ +#undef CONFIG_DDR_ECC /* only for ECC DDR module */ +#undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ #if defined(CONFIG_MPC85xx_REV1) - #define CONFIG_DDR_DLL /* possible DLL fix needed */ + #define CONFIG_DDR_DLL /* possible DLL fix needed */ #endif #undef CONFIG_CLOCKS_IN_MHZ @@ -177,8 +177,8 @@ #define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ /* Serial Port */ -#undef CONFIG_CONS_ON_SCC /* define if console on SCC */ -#undef CONFIG_CONS_NONE /* define if console on something else */ +#undef CONFIG_CONS_ON_SCC /* define if console on SCC */ +#undef CONFIG_CONS_NONE /* define if console on something else */ #define CONFIG_CONS_INDEX 1 #undef CONFIG_SERIAL_SOFTWARE_FIFO @@ -200,6 +200,11 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 +#define CONFIG_OF_STDOUT_VIA_ALIAS 1 + /* * I2C */ @@ -215,16 +220,28 @@ #define CFG_PCI_MEM_PHYS 0xC0000000 #define CFG_PCI_MEM_SIZE 0x10000000 -#if defined(CONFIG_TSEC_ENET) /* TSEC Ethernet port */ +#ifdef CONFIG_TSEC_ENET + +#ifndef CONFIG_NET_MULTI +#define CONFIG_NET_MULTI 1 +#endif -# define CONFIG_NET_MULTI 1 -# define CONFIG_MII 1 /* MII PHY management */ -# define CONFIG_MPC85xx_TSEC1 -# define CONFIG_MPC85xx_TSEC1_NAME "TSEC0" -# define TSEC1_PHY_ADDR 25 -# define TSEC1_PHYIDX 0 -/* Options are: TSEC0 */ -# define CONFIG_ETHPRIME "TSEC0" +#ifndef CONFIG_MII +#define CONFIG_MII 1 /* MII PHY management */ +#endif +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "TSEC0" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "TSEC1" +#define TSEC1_PHY_ADDR 0x19 +#define TSEC2_PHY_ADDR 0x1a +#define TSEC1_PHYIDX 0 +#define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT + +/* Options are: TSEC[0-1] */ +#define CONFIG_ETHPRIME "TSEC0" #elif defined(CONFIG_ETHER_ON_FCC) /* CPM FCC Ethernet */ @@ -272,20 +289,20 @@ * FLASH and environment organization */ -#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ -#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */ +#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ +#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */ #if 0 -#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ -#define CFG_FLASH_PROTECTION /* use hardware protection */ +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ +#define CFG_FLASH_PROTECTION /* use hardware protection */ #endif -#define CFG_MAX_FLASH_SECT 64 /* max number of sectors on one chip */ -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 64 /* max number of sectors on one chip */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ #undef CFG_FLASH_CHECKSUM -#define CFG_FLASH_ERASE_TOUT 200000 /* Timeout for Flash Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 50000 /* Timeout for Flash Write (in ms) */ +#define CFG_FLASH_ERASE_TOUT 200000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 50000 /* Timeout for Flash Write (in ms) */ -#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ +#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ #if 0 /* XXX This doesn't work and I don't want to fix it */ @@ -315,9 +332,8 @@ #define CFG_ENV_SIZE 0x2000 #endif -#define CONFIG_BOOTARGS "root=/dev/nfs rw nfsroot=192.168.0.251:/tftpboot ip=192.168.0.105:192.168.0.251::255.255.255.0:sbc8560:eth0:off console=ttyS0,9600" +#define CONFIG_BOOTARGS "root=/dev/nfs rw ip=dhcp console=ttyS0,9600" /*#define CONFIG_BOOTARGS "root=/dev/ram rw console=ttyS0,115200"*/ -#define CONFIG_BOOTCOMMAND "bootm 0xff800000 0xffa00000" #define CONFIG_BOOTDELAY 5 /* -1 disable autoboot */ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ @@ -389,25 +405,57 @@ #define BOOTFLAG_WARM 0x02 /* Software reboot */ #if defined(CONFIG_CMD_KGDB) - #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ - #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif -/*Note: change below for your network setting!!! */ #if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC) -# define CONFIG_ETHADDR 00:01:af:07:9b:8a -# define CONFIG_HAS_ETH1 -# define CONFIG_ETH1ADDR 00:01:af:07:9b:8b -# define CONFIG_HAS_ETH2 -# define CONFIG_ETH2ADDR 00:01:af:07:9b:8c +#define CONFIG_HAS_ETH0 +#define CONFIG_HAS_ETH1 #endif -#define CONFIG_SERVERIP 192.168.0.131 -#define CONFIG_IPADDR 192.168.0.105 -#define CONFIG_GATEWAYIP 0.0.0.0 -#define CONFIG_NETMASK 255.255.255.0 +/* You can compile in a MAC address and your custom net settings by using + * the following syntax. Your board should be marked with the assigned + * MAC addresses directly on it. + * + * #define CONFIG_ETHADDR de:ad:be:ef:00:00 + * #define CONFIG_ETH1ADDR fa:ke:ad:dr:es:s! + * #define CONFIG_SERVERIP <server ip> + * #define CONFIG_IPADDR <board ip> + * #define CONFIG_GATEWAYIP <gateway ip> + * #define CONFIG_NETMASK <your netmask> + */ + #define CONFIG_HOSTNAME SBC8560 #define CONFIG_ROOTPATH /home/ppc -#define CONFIG_BOOTFILE pImage +#define CONFIG_BOOTFILE uImage + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "consoledev=ttyS0\0" \ + "ramdiskaddr=2000000\0" \ + "ramdiskfile=ramdisk.uboot\0" \ + "fdtaddr=c00000\0" \ + "fdtfile=sbc8560.dtb\0" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND #endif /* __CONFIG_H */ diff --git a/include/configs/sc520_spunk.h b/include/configs/sc520_spunk.h index 051b2e0f58..072675b0bd 100644 --- a/include/configs/sc520_spunk.h +++ b/include/configs/sc520_spunk.h @@ -144,7 +144,7 @@ #define CONFIG_SPI_EEPROM /* SPI EEPROMs such as AT25010 or AT25640 */ #define CONFIG_MW_EEPROM /* MicroWire EEPROMS such as AT93LC46 */ -#define CONFIG_DS1722 /* Dallas DS1722 SPI Temperature probe */ +#define CONFIG_DTT_DS1722 /* Dallas DS1722 SPI Temperature probe */ /* allow to overwrite serial and ethaddr */ diff --git a/include/dataflash.h b/include/dataflash.h index f20c738686..80f0633aa9 100644 --- a/include/dataflash.h +++ b/include/dataflash.h @@ -137,6 +137,7 @@ struct dataflash_addr { /*-------------------------------------------------------------------------------------------------*/ #define AT45DB161 0x2c +#define AT45DB021 0x14 #define AT45DB321 0x34 #define AT45DB642 0x3c #define AT45DB128 0x10 diff --git a/include/dtt.h b/include/dtt.h index 4e8aaad87f..34053d10ab 100644 --- a/include/dtt.h +++ b/include/dtt.h @@ -40,9 +40,11 @@ #define DTT_COMMERCIAL_MAX_TEMP 70 /* 0 - +70 C */ #define DTT_INDUSTRIAL_MAX_TEMP 85 /* -40 - +85 C */ #define DTT_AUTOMOTIVE_MAX_TEMP 105 /* -40 - +105 C */ + #ifndef CFG_DTT_MAX_TEMP #define CFG_DTT_MAX_TEMP DTT_COMMERCIAL_MAX_TEMP #endif + #ifndef CFG_DTT_HYSTERESIS #define CFG_DTT_HYSTERESIS 5 /* 5 C */ #endif @@ -54,79 +56,4 @@ extern int dtt_write(int sensor, int reg, int val); extern int dtt_get_temp(int sensor); #endif -#if defined(CONFIG_DTT_LM75) -#define DTT_READ_TEMP 0x0 -#define DTT_CONFIG 0x1 -#define DTT_TEMP_HYST 0x2 -#define DTT_TEMP_SET 0x3 -#endif - -#if defined(CONFIG_DTT_LM81) -#define DTT_READ_TEMP 0x27 -#define DTT_CONFIG_TEMP 0x4b -#define DTT_TEMP_MAX 0x39 -#define DTT_TEMP_HYST 0x3a -#define DTT_CONFIG 0x40 -#endif - -#if defined(CONFIG_DTT_DS1621) -#define DTT_READ_TEMP 0xAA -#define DTT_READ_COUNTER 0xA8 -#define DTT_READ_SLOPE 0xA9 -#define DTT_WRITE_START_CONV 0xEE -#define DTT_WRITE_STOP_CONV 0x22 -#define DTT_TEMP_HIGH 0xA1 -#define DTT_TEMP_LOW 0xA2 -#define DTT_CONFIG 0xAC -#endif - -#if defined(CONFIG_DTT_DS1775) -#define DTT_READ_TEMP 0x0 -#define DTT_CONFIG 0x1 -#define DTT_TEMP_HYST 0x2 -#define DTT_TEMP_OS 0x3 -#endif - -#if defined(CONFIG_DTT_ADM1021) -#define DTT_READ_LOC_VALUE 0x00 -#define DTT_READ_REM_VALUE 0x01 -#define DTT_READ_STATUS 0x02 -#define DTT_READ_CONFIG 0x03 -#define DTT_READ_CONVRATE 0x04 -#define DTT_READ_LOC_HIGHLIM 0x05 -#define DTT_READ_LOC_LOWLIM 0x06 -#define DTT_READ_REM_HIGHLIM 0x07 -#define DTT_READ_REM_LOWLIM 0x08 -#define DTT_READ_DEVID 0xfe - -#define DTT_WRITE_CONFIG 0x09 -#define DTT_WRITE_CONVRATE 0x0a -#define DTT_WRITE_LOC_HIGHLIM 0x0b -#define DTT_WRITE_LOC_LOWLIM 0x0c -#define DTT_WRITE_REM_HIGHLIM 0x0d -#define DTT_WRITE_REM_LOWLIM 0x0e -#define DTT_WRITE_ONESHOT 0x0f - -#define DTT_STATUS_BUSY 0x80 /* 1=ADC Converting */ -#define DTT_STATUS_LHIGH 0x40 /* 1=Local High Temp Limit Tripped */ -#define DTT_STATUS_LLOW 0x20 /* 1=Local Low Temp Limit Tripped */ -#define DTT_STATUS_RHIGH 0x10 /* 1=Remote High Temp Limit Tripped */ -#define DTT_STATUS_RLOW 0x08 /* 1=Remote Low Temp Limit Tripped */ -#define DTT_STATUS_OPEN 0x04 /* 1=Remote Sensor Open-Circuit */ - -#define DTT_CONFIG_ALERT_MASKED 0x80 /* 0=ALERT Enabled, 1=ALERT Masked */ -#define DTT_CONFIG_STANDBY 0x40 /* 0=Run, 1=Standby */ - -#define DTT_ADM1021_DEVID 0x41 -#endif - -#if defined(CONFIG_DTT_LM73) -#define DTT_READ_TEMP 0x0 -#define DTT_CONFIG 0x1 -#define DTT_TEMP_HIGH 0x2 -#define DTT_TEMP_LOW 0x3 -#define DTT_CONTROL 0x4 -#define DTT_ID 0x7 -#endif - #endif /* _DTT_H_ */ diff --git a/include/fdt_support.h b/include/fdt_support.h index 890993ff9d..a7c6326e12 100644 --- a/include/fdt_support.h +++ b/include/fdt_support.h @@ -56,6 +56,12 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd); static inline void fdt_fixup_dr_usb(void *blob, bd_t *bd) {} #endif /* CONFIG_HAS_FSL_DR_USB */ +#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC83XX) +void fdt_fixup_crypto_node(void *blob, int sec_rev); +#else +static inline void fdt_fixup_crypto_node(void *blob, int sec_rev) {} +#endif + #ifdef CONFIG_OF_BOARD_SETUP void ft_board_setup(void *blob, bd_t *bd); void ft_cpu_setup(void *blob, bd_t *bd); diff --git a/include/mpc5xxx.h b/include/mpc5xxx.h index a4581a3e6b..5d11ef0f48 100644 --- a/include/mpc5xxx.h +++ b/include/mpc5xxx.h @@ -198,6 +198,35 @@ #define GPIO_PSC3_9 0x04000000UL #define GPIO_PSC1_4 0x01000000UL +#define MPC5XXX_GPIO_SIMPLE_PSC6_3 0x20000000UL +#define MPC5XXX_GPIO_SIMPLE_PSC6_2 0x10000000UL +#define MPC5XXX_GPIO_SIMPLE_PSC3_7 0x00002000UL +#define MPC5XXX_GPIO_SIMPLE_PSC3_6 0x00001000UL +#define MPC5XXX_GPIO_SIMPLE_PSC3_3 0x00000800UL +#define MPC5XXX_GPIO_SIMPLE_PSC3_2 0x00000400UL +#define MPC5XXX_GPIO_SIMPLE_PSC3_1 0x00000200UL +#define MPC5XXX_GPIO_SIMPLE_PSC3_0 0x00000100UL +#define MPC5XXX_GPIO_SIMPLE_PSC2_3 0x00000080UL +#define MPC5XXX_GPIO_SIMPLE_PSC2_2 0x00000040UL +#define MPC5XXX_GPIO_SIMPLE_PSC2_1 0x00000020UL +#define MPC5XXX_GPIO_SIMPLE_PSC2_0 0x00000010UL +#define MPC5XXX_GPIO_SIMPLE_PSC1_3 0x00000008UL +#define MPC5XXX_GPIO_SIMPLE_PSC1_2 0x00000004UL +#define MPC5XXX_GPIO_SIMPLE_PSC1_1 0x00000002UL +#define MPC5XXX_GPIO_SIMPLE_PSC1_0 0x00000001UL + +#define MPC5XXX_GPIO_SINT_PSC3_5 0x02 +#define MPC5XXX_GPIO_SINT_PSC3_4 0x01 + +#define MPC5XXX_GPIO_WKUP_7 0x80 +#define MPC5XXX_GPIO_WKUP_6 0x40 +#define MPC5XXX_GPIO_WKUP_PSC6_1 0x20 +#define MPC5XXX_GPIO_WKUP_PSC6_0 0x10 +#define MPC5XXX_GPIO_WKUP_ETH17 0x08 +#define MPC5XXX_GPIO_WKUP_PSC3_9 0x04 +#define MPC5XXX_GPIO_WKUP_PSC2_4 0x02 +#define MPC5XXX_GPIO_WKUP_PSC1_4 0x01 + /* PCI registers */ #define MPC5XXX_PCI_CMD (MPC5XXX_PCI + 0x04) #define MPC5XXX_PCI_CFG (MPC5XXX_PCI + 0x0c) diff --git a/include/mpc83xx.h b/include/mpc83xx.h index 939b82541a..897ecd6bc9 100644 --- a/include/mpc83xx.h +++ b/include/mpc83xx.h @@ -61,21 +61,26 @@ #endif #define PARTID_NO_E(spridr) ((spridr & 0xFFFE0000) >> 16) -#define IS_E_PROCESSOR(spridr) (!(spridr & 0x00010000)) /* has SEC */ +#define SPR_FAMILY(spridr) ((spridr & 0xFFF00000) >> 20) +#define SPR_831X_FAMILY 0x80B #define SPR_8311 0x80B2 #define SPR_8313 0x80B0 #define SPR_8314 0x80B6 #define SPR_8315 0x80B4 +#define SPR_832X_FAMILY 0x806 #define SPR_8321 0x8066 #define SPR_8323 0x8062 +#define SPR_834X_FAMILY 0x803 #define SPR_8343 0x8036 #define SPR_8347_TBGA_ 0x8032 #define SPR_8347_PBGA_ 0x8034 #define SPR_8349 0x8030 +#define SPR_836X_FAMILY 0x804 #define SPR_8358_TBGA_ 0x804A #define SPR_8358_PBGA_ 0x804E #define SPR_8360 0x8048 +#define SPR_837X_FAMILY 0x80C #define SPR_8377 0x80C6 #define SPR_8378 0x80C4 #define SPR_8379 0x80C2 diff --git a/include/ppc4xx.h b/include/ppc4xx.h index 0a8479f262..1d06da8779 100644 --- a/include/ppc4xx.h +++ b/include/ppc4xx.h @@ -46,6 +46,12 @@ #endif #if defined(CONFIG_440) +/* + * Enable long long (%ll ...) printf format on 440 PPC's since most of + * them support 36bit physical addressing + */ +#define CFG_64BIT_VSPRINTF +#define CFG_64BIT_STRTOUL #include <ppc440.h> #else #include <ppc405.h> diff --git a/lib_arm/bootm.c b/lib_arm/bootm.c index 6b4a80723f..b838c374ac 100644 --- a/lib_arm/bootm.c +++ b/lib_arm/bootm.c @@ -43,9 +43,6 @@ static void setup_memory_tags (bd_t *bd); # endif static void setup_commandline_tag (bd_t *bd, char *commandline); -#if 0 -static void setup_ramdisk_tag (bd_t *bd); -#endif # ifdef CONFIG_INITRD_TAG static void setup_initrd_tag (bd_t *bd, ulong initrd_start, ulong initrd_end); diff --git a/lib_generic/lmb.c b/lib_generic/lmb.c index 6b46fa8868..1c6cf7ce00 100644 --- a/lib_generic/lmb.c +++ b/lib_generic/lmb.c @@ -25,19 +25,21 @@ void lmb_dump_all(struct lmb *lmb) debug(" memory.size = 0x%llx\n", (unsigned long long)lmb->memory.size); for (i=0; i < lmb->memory.cnt ;i++) { - debug(" memory.reg[0x%x].base = 0x%llx\n", i, - lmb->memory.region[i].base); + debug(" memory.reg[0x%lx].base = 0x%llx\n", i, + (long long unsigned)lmb->memory.region[i].base); debug(" .size = 0x%llx\n", - lmb->memory.region[i].size); + (long long unsigned)lmb->memory.region[i].size); } - debug("\n reserved.cnt = 0x%lx\n", lmb->reserved.cnt); - debug(" reserved.size = 0x%llx\n", lmb->reserved.size); + debug("\n reserved.cnt = 0x%lx\n", + lmb->reserved.cnt); + debug(" reserved.size = 0x%llx\n", + (long long unsigned)lmb->reserved.size); for (i=0; i < lmb->reserved.cnt ;i++) { - debug(" reserved.reg[0x%x].base = 0x%llx\n", i, - lmb->reserved.region[i].base); + debug(" reserved.reg[0x%lx].base = 0x%llx\n", i, + (long long unsigned)lmb->reserved.region[i].base); debug(" .size = 0x%llx\n", - lmb->reserved.region[i].size); + (long long unsigned)lmb->reserved.region[i].size); } #endif /* DEBUG */ } @@ -266,7 +268,7 @@ phys_addr_t lmb_alloc_base(struct lmb *lmb, phys_size_t size, ulong align, phys_ if (alloc == 0) printf("ERROR: Failed to allocate 0x%lx bytes below 0x%lx.\n", - size, max_addr); + (ulong)size, (ulong)max_addr); return alloc; } diff --git a/lib_generic/vsprintf.c b/lib_generic/vsprintf.c index 3db6c3f936..7c9cfe16ce 100644 --- a/lib_generic/vsprintf.c +++ b/lib_generic/vsprintf.c @@ -262,7 +262,9 @@ int vsprintf(char *buf, const char *fmt, va_list args) /* get the conversion qualifier */ qualifier = -1; - if (*fmt == 'h' || *fmt == 'l' || *fmt == 'q') { + if (*fmt == 'h' || *fmt == 'l' || *fmt == 'L' || + *fmt == 'Z' || *fmt == 'z' || *fmt == 't' || + *fmt == 'q' ) { qualifier = *fmt; if (qualifier == 'l' && *(fmt+1) == 'l') { qualifier = 'q'; @@ -355,9 +357,13 @@ int vsprintf(char *buf, const char *fmt, va_list args) num = va_arg(args, unsigned long long); else #endif - if (qualifier == 'l') + if (qualifier == 'l') { num = va_arg(args, unsigned long); - else if (qualifier == 'h') { + } else if (qualifier == 'Z' || qualifier == 'z') { + num = va_arg(args, size_t); + } else if (qualifier == 't') { + num = va_arg(args, ptrdiff_t); + } else if (qualifier == 'h') { num = (unsigned short) va_arg(args, int); if (flags & SIGN) num = (short) num; diff --git a/lib_m68k/board.c b/lib_m68k/board.c index ae942e5e57..a13ea2682b 100644 --- a/lib_m68k/board.c +++ b/lib_m68k/board.c @@ -176,7 +176,7 @@ typedef int (init_fnc_t) (void); static int init_baudrate (void) { - uchar tmp[64]; /* long enough for environment variables */ + char tmp[64]; /* long enough for environment variables */ int i = getenv_r ("baudrate", tmp, sizeof (tmp)); gd->baudrate = (i > 0) @@ -267,7 +267,7 @@ board_init_f (ulong bootflag) #ifdef CONFIG_PRAM int i; ulong reg; - uchar tmp[64]; /* long enough for environment variables */ + char tmp[64]; /* long enough for environment variables */ #endif /* Pointer is writable since we allocated a register for it */ @@ -347,11 +347,11 @@ board_init_f (ulong bootflag) addr_sp -= sizeof (bd_t); bd = (bd_t *) addr_sp; gd->bd = bd; - debug ("Reserving %d Bytes for Board Info at: %08lx\n", + debug ("Reserving %zu Bytes for Board Info at: %08lx\n", sizeof (bd_t), addr_sp); addr_sp -= sizeof (gd_t); id = (gd_t *) addr_sp; - debug ("Reserving %d Bytes for Global Data at: %08lx\n", + debug ("Reserving %zu Bytes for Global Data at: %08lx\n", sizeof (gd_t), addr_sp); /* Reserve memory for boot params. */ @@ -752,7 +752,7 @@ void board_init_r (gd_t *id, ulong dest_addr) */ { ulong pram; - uchar memsz[32]; + char memsz[32]; #ifdef CONFIG_PRAM char *s; diff --git a/lib_mips/board.c b/lib_mips/board.c index 532550b603..09b8b3bb3c 100644 --- a/lib_mips/board.c +++ b/lib_mips/board.c @@ -242,12 +242,12 @@ void board_init_f(ulong bootflag) addr_sp -= sizeof(bd_t); bd = (bd_t *)addr_sp; gd->bd = bd; - debug ("Reserving %d Bytes for Board Info at: %08lx\n", + debug ("Reserving %zu Bytes for Board Info at: %08lx\n", sizeof(bd_t), addr_sp); addr_sp -= sizeof(gd_t); id = (gd_t *)addr_sp; - debug ("Reserving %d Bytes for Global Data at: %08lx\n", + debug ("Reserving %zu Bytes for Global Data at: %08lx\n", sizeof (gd_t), addr_sp); /* Reserve memory for boot params. diff --git a/lib_mips/bootm.c b/lib_mips/bootm.c index 8fe3782b75..5c46a5aec3 100644 --- a/lib_mips/bootm.c +++ b/lib_mips/bootm.c @@ -54,7 +54,7 @@ void do_bootm_linux (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[], char *commandline = getenv ("bootargs"); char env_buf[12]; int ret; - const char *cp; + char *cp; /* find kernel entry point */ if (images->legacy_hdr_valid) { @@ -89,15 +89,11 @@ void do_bootm_linux (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[], linux_params_init (UNCACHED_SDRAM (gd->bd->bi_boot_params), commandline); #ifdef CONFIG_MEMSIZE_IN_BYTES - sprintf (env_buf, "%lu", gd->ram_size); -#ifdef DEBUG - printf ("## Giving linux memsize in bytes, %lu\n", gd->ram_size); -#endif + sprintf (env_buf, "%lu", (ulong)gd->ram_size); + debug ("## Giving linux memsize in bytes, %lu\n", (ulong)gd->ram_size); #else - sprintf (env_buf, "%lu", gd->ram_size >> 20); -#ifdef DEBUG - printf ("## Giving linux memsize in MB, %lu\n", gd->ram_size >> 20); -#endif + sprintf (env_buf, "%lu", (ulong)(gd->ram_size >> 20)); + debug ("## Giving linux memsize in MB, %lu\n", (ulong)(gd->ram_size >> 20)); #endif /* CONFIG_MEMSIZE_IN_BYTES */ linux_env_set ("memsize", env_buf); diff --git a/lib_ppc/board.c b/lib_ppc/board.c index 1bc2f46d46..71a70db504 100644 --- a/lib_ppc/board.c +++ b/lib_ppc/board.c @@ -524,11 +524,11 @@ void board_init_f (ulong bootflag) addr_sp -= sizeof (bd_t); bd = (bd_t *) addr_sp; gd->bd = bd; - debug ("Reserving %d Bytes for Board Info at: %08lx\n", + debug ("Reserving %zu Bytes for Board Info at: %08lx\n", sizeof (bd_t), addr_sp); addr_sp -= sizeof (gd_t); id = (gd_t *) addr_sp; - debug ("Reserving %d Bytes for Global Data at: %08lx\n", + debug ("Reserving %zu Bytes for Global Data at: %08lx\n", sizeof (gd_t), addr_sp); /* diff --git a/net/bootp.c b/net/bootp.c index 3c0614c5cf..5121caa51b 100644 --- a/net/bootp.c +++ b/net/bootp.c @@ -313,7 +313,7 @@ BootpHandler(uchar * pkt, unsigned dest, unsigned src, unsigned len) Bootp_t *bp; char *s; - debug ("got BOOTP packet (src=%d, dst=%d, len=%d want_len=%d)\n", + debug ("got BOOTP packet (src=%d, dst=%d, len=%d want_len=%zu)\n", src, dest, len, sizeof (Bootp_t)); bp = (Bootp_t *)pkt; @@ -924,8 +924,6 @@ DhcpHandler(uchar * pkt, unsigned dest, unsigned src, unsigned len) if (NetReadLong((ulong*)&bp->bp_vend[0]) == htonl(BOOTP_VENDOR_MAGIC)) DhcpOptionsProcess((u8 *)&bp->bp_vend[4], bp); - BootpCopyNetParams(bp); /* Store net params from reply */ - NetSetTimeout(TIMEOUT * CFG_HZ, BootpTimeout); DhcpSendRequestPkt(bp); #ifdef CFG_BOOTFILE_PREFIX @@ -627,7 +627,7 @@ int eth_initialize(bd_t *bis) #if defined(CONFIG_MCF52x2) mcf52x2_miiphy_initialize(bis); #endif -#if defined(CONFIG_NETARM) +#if defined(CONFIG_DRIVER_NS7520_ETHERNET) ns7520_miiphy_initialize(bis); #endif #if defined(CONFIG_DRIVER_TI_EMAC) @@ -1390,7 +1390,7 @@ NetReceive(volatile uchar * inpkt, int len) puts ("Got IP\n"); #endif if (len < IP_HDR_SIZE) { - debug ("len bad %d < %d\n", len, IP_HDR_SIZE); + debug ("len bad %d < %lu\n", len, (ulong)IP_HDR_SIZE); return; } if (len < ntohs(ip->ip_len)) { @@ -1520,7 +1520,8 @@ NetReceive(volatile uchar * inpkt, int len) xsum = (xsum & 0x0000ffff) + ((xsum >> 16) & 0x0000ffff); } if ((xsum != 0x00000000) && (xsum != 0x0000ffff)) { - printf(" UDP wrong checksum %08x %08x\n", xsum, ntohs(ip->udp_xsum)); + printf(" UDP wrong checksum %08lx %08x\n", + xsum, ntohs(ip->udp_xsum)); return; } } diff --git a/post/cpu/ppc4xx/spr.c b/post/cpu/ppc4xx/spr.c index 6152eb21a9..110df6e910 100644 --- a/post/cpu/ppc4xx/spr.c +++ b/post/cpu/ppc4xx/spr.c @@ -76,7 +76,9 @@ static struct { {0x3b, "CSRR1", 0x00000000, 0x00000000}, {0x3d, "DEAR", 0x00000000, 0x00000000}, {0x3e, "ESR", 0x00000000, 0x00000000}, +#ifdef CONFIG_440 {0x3f, "IVPR", 0xffff0000, 0x00000000}, +#endif {0x100, "USPRG0", 0x00000000, 0x00000000}, {0x104, "SPRG4", 0x00000000, 0x00000000}, {0x105, "SPRG5", 0x00000000, 0x00000000}, diff --git a/post/lib_ppc/b.c b/post/lib_ppc/b.c index 45b9ff26e8..7a2583dc74 100644 --- a/post/lib_ppc/b.c +++ b/post/lib_ppc/b.c @@ -95,6 +95,7 @@ int cpu_post_test_b (void) { int ret = 0; unsigned int i; + int flag = disable_interrupts(); if (ret == 0) { @@ -188,6 +189,9 @@ int cpu_post_test_b (void) } } + if (flag) + enable_interrupts(); + return ret; } diff --git a/post/lib_ppc/cmp.c b/post/lib_ppc/cmp.c index 8d80f86aaf..13809d417b 100644 --- a/post/lib_ppc/cmp.c +++ b/post/lib_ppc/cmp.c @@ -102,6 +102,7 @@ int cpu_post_test_cmp (void) { int ret = 0; unsigned int i; + int flag = disable_interrupts(); for (i = 0; i < cpu_post_cmp_size && ret == 0; i++) { @@ -124,6 +125,9 @@ int cpu_post_test_cmp (void) } } + if (flag) + enable_interrupts(); + return ret; } diff --git a/post/lib_ppc/cmpi.c b/post/lib_ppc/cmpi.c index 92b4d57b1f..5ecfe872a4 100644 --- a/post/lib_ppc/cmpi.c +++ b/post/lib_ppc/cmpi.c @@ -102,6 +102,7 @@ int cpu_post_test_cmpi (void) { int ret = 0; unsigned int i; + int flag = disable_interrupts(); for (i = 0; i < cpu_post_cmpi_size && ret == 0; i++) { @@ -124,6 +125,9 @@ int cpu_post_test_cmpi (void) } } + if (flag) + enable_interrupts(); + return ret; } diff --git a/post/lib_ppc/complex.c b/post/lib_ppc/complex.c index 271392a0e8..4983c51919 100644 --- a/post/lib_ppc/complex.c +++ b/post/lib_ppc/complex.c @@ -101,6 +101,7 @@ static int cpu_post_test_complex_2 (void) int cpu_post_test_complex (void) { int ret = 0; + int flag = disable_interrupts(); if (ret == 0) { @@ -117,6 +118,9 @@ int cpu_post_test_complex (void) post_log ("Error at complex test !\n"); } + if (flag) + enable_interrupts(); + return ret; } diff --git a/post/lib_ppc/cr.c b/post/lib_ppc/cr.c index 0bd9e748f2..2c7976ac31 100644 --- a/post/lib_ppc/cr.c +++ b/post/lib_ppc/cr.c @@ -248,6 +248,7 @@ int cpu_post_test_cr (void) int ret = 0; unsigned int i; unsigned long cr_sav; + int flag = disable_interrupts(); asm ( "mfcr %0" : "=r" (cr_sav) : ); @@ -347,6 +348,9 @@ int cpu_post_test_cr (void) asm ( "mtcr %0" : : "r" (cr_sav)); + if (flag) + enable_interrupts(); + return ret; } diff --git a/post/lib_ppc/load.c b/post/lib_ppc/load.c index 86bc2234cf..eccebb7ca1 100644 --- a/post/lib_ppc/load.c +++ b/post/lib_ppc/load.c @@ -178,6 +178,7 @@ int cpu_post_test_load (void) { int ret = 0; unsigned int i; + int flag = disable_interrupts(); for (i = 0; i < cpu_post_load_size && ret == 0; i++) { @@ -246,6 +247,9 @@ int cpu_post_test_load (void) } } + if (flag) + enable_interrupts(); + return ret; } diff --git a/post/lib_ppc/multi.c b/post/lib_ppc/multi.c index 5d3f584281..47135abd4c 100644 --- a/post/lib_ppc/multi.c +++ b/post/lib_ppc/multi.c @@ -44,6 +44,7 @@ int cpu_post_test_multi (void) { int ret = 0; unsigned int i; + int flag = disable_interrupts(); if (ret == 0) { @@ -72,6 +73,9 @@ int cpu_post_test_multi (void) post_log ("Error at multi test !\n"); } + if (flag) + enable_interrupts(); + return ret; } diff --git a/post/lib_ppc/store.c b/post/lib_ppc/store.c index 09ec48554e..c96f263e30 100644 --- a/post/lib_ppc/store.c +++ b/post/lib_ppc/store.c @@ -163,6 +163,7 @@ int cpu_post_test_store (void) { int ret = 0; unsigned int i; + int flag = disable_interrupts(); for (i = 0; i < cpu_post_store_size && ret == 0; i++) { @@ -226,6 +227,9 @@ int cpu_post_test_store (void) } } + if (flag) + enable_interrupts(); + return ret; } diff --git a/post/lib_ppc/string.c b/post/lib_ppc/string.c index b2daa88049..3683ac9956 100644 --- a/post/lib_ppc/string.c +++ b/post/lib_ppc/string.c @@ -47,6 +47,7 @@ int cpu_post_test_string (void) { int ret = 0; unsigned int i; + int flag = disable_interrupts(); if (ret == 0) { @@ -97,6 +98,9 @@ int cpu_post_test_string (void) post_log ("Error at string test !\n"); } + if (flag) + enable_interrupts(); + return ret; } diff --git a/tools/.gitignore b/tools/.gitignore index df3500d965..157b6790e1 100644 --- a/tools/.gitignore +++ b/tools/.gitignore @@ -6,8 +6,11 @@ /img2srec /md5.c /mkimage +/mpc86x_clk +/ncp /sha1.c /ubsha1 +/inca-swap-bytes /image.c /fdt.c /fdt_ro.c diff --git a/tools/gdb/Makefile b/tools/gdb/Makefile index 632103d453..c44cc8a555 100644 --- a/tools/gdb/Makefile +++ b/tools/gdb/Makefile @@ -47,7 +47,7 @@ HOSTOS := $(shell uname -s | sed -e 's/\([Cc][Yy][Gg][Ww][Ii][Nn]\).*/cygwin/') ifeq ($(HOSTOS),cygwin) all: -.depend: +$(obj).depend: else # ! CYGWIN diff --git a/tools/updater/cmd_flash.c b/tools/updater/cmd_flash.c index a976e0da61..0f6f62b944 100644 --- a/tools/updater/cmd_flash.c +++ b/tools/updater/cmd_flash.c @@ -187,7 +187,7 @@ int flash_sect_erase (ulong addr_first, ulong addr_last) erased = 0; - for (bank=0,info=&flash_info[0]; bank < CFG_MAX_FLASH_BANKS; ++bank, ++info) { + for (bank=0,info = &flash_info[0]; bank < CFG_MAX_FLASH_BANKS; ++bank, ++info) { ulong b_end; int sect; @@ -366,7 +366,7 @@ int flash_sect_protect (int p, ulong addr_first, ulong addr_last) protected = 0; - for (bank=0,info=&flash_info[0]; bank < CFG_MAX_FLASH_BANKS; ++bank, ++info) { + for (bank=0,info = &flash_info[0]; bank < CFG_MAX_FLASH_BANKS; ++bank, ++info) { ulong b_end; int sect; diff --git a/tools/updater/flash.c b/tools/updater/flash.c index 1ed77b1b18..a73159ff9b 100644 --- a/tools/updater/flash.c +++ b/tools/updater/flash.c @@ -93,7 +93,7 @@ addr2info (ulong addr) flash_info_t *info; int i; - for (i=0, info=&flash_info[0]; i<CFG_MAX_FLASH_BANKS; ++i, ++info) { + for (i=0, info = &flash_info[0]; i<CFG_MAX_FLASH_BANKS; ++i, ++info) { if (info->flash_id != FLASH_UNKNOWN && addr >= info->start[0] && /* WARNING - The '- 1' is needed if the flash |
