diff options
| -rw-r--r-- | cpu/ppc4xx/44x_spd_ddr2.c | 56 | ||||
| -rw-r--r-- | include/asm-ppc/ppc4xx-sdram.h | 4 | ||||
| -rw-r--r-- | include/configs/katmai.h | 7 |
3 files changed, 54 insertions, 13 deletions
diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c index c28fc463b5..9a5340c351 100644 --- a/cpu/ppc4xx/44x_spd_ddr2.c +++ b/cpu/ppc4xx/44x_spd_ddr2.c @@ -138,6 +138,20 @@ #endif /* + * Newer PPC's like 440SPe, 460EX/GT can be equipped with more than 2GB of SDRAM. + * To support such configurations, we "only" map the first 2GB via the TLB's. We + * need some free virtual address space for the remaining peripherals like, SoC + * devices, FLASH etc. + * + * Note that ECC is currently not supported on configurations with more than 2GB + * SDRAM. This is because we only map the first 2GB on such systems, and therefore + * the ECC parity byte of the remaining area can't be written. + */ +#ifndef CONFIG_MAX_MEM_MAPPED +#define CONFIG_MAX_MEM_MAPPED ((phys_size_t)2 << 30) +#endif + +/* * Board-specific Platform code can reimplement spd_ddr_init_hang () if needed */ void __spd_ddr_init_hang (void) @@ -181,7 +195,7 @@ typedef enum ddr_cas_id { /*-----------------------------------------------------------------------------+ * Prototypes *-----------------------------------------------------------------------------*/ -static unsigned long sdram_memsize(void); +static phys_size_t sdram_memsize(void); static void get_spd_info(unsigned long *dimm_populated, unsigned char *iic0_dimm_addr, unsigned long num_dimm_banks); @@ -306,9 +320,9 @@ static unsigned char spd_read(uchar chip, uint addr) /*-----------------------------------------------------------------------------+ * sdram_memsize *-----------------------------------------------------------------------------*/ -static unsigned long sdram_memsize(void) +static phys_size_t sdram_memsize(void) { - unsigned long mem_size; + phys_size_t mem_size; unsigned long mcopt2; unsigned long mcstat; unsigned long mb0cf; @@ -364,6 +378,8 @@ static unsigned long sdram_memsize(void) mem_size+=4096; break; default: + printf("WARNING: Unsupported bank size (SDSZ=0x%x)!\n" + , sdsz); mem_size=0; break; } @@ -371,8 +387,7 @@ static unsigned long sdram_memsize(void) } } - mem_size *= 1024 * 1024; - return(mem_size); + return mem_size << 20; } /*-----------------------------------------------------------------------------+ @@ -400,7 +415,7 @@ phys_size_t initdram(int board_type) unsigned long val; ddr_cas_id_t selected_cas = DDR_CAS_5; /* preset to silence compiler */ int write_recovery; - unsigned long dram_size = 0; + phys_size_t dram_size = 0; num_dimm_banks = sizeof(iic0_dimm_addr); @@ -558,6 +573,12 @@ phys_size_t initdram(int board_type) /* get installed memory size */ dram_size = sdram_memsize(); + /* + * Limit size to 2GB + */ + if (dram_size > CONFIG_MAX_MEM_MAPPED) + dram_size = CONFIG_MAX_MEM_MAPPED; + /* and program tlb entries for this size (dynamic) */ /* @@ -595,7 +616,7 @@ phys_size_t initdram(int board_type) */ set_mcsr(get_mcsr()); - return dram_size; + return sdram_memsize(); } static void get_spd_info(unsigned long *dimm_populated, @@ -2133,15 +2154,15 @@ static void program_memory_queue(unsigned long *dimm_populated, unsigned long num_dimm_banks) { unsigned long dimm_num; - unsigned long rank_base_addr; + phys_size_t rank_base_addr; unsigned long rank_reg; - unsigned long rank_size_bytes; + phys_size_t rank_size_bytes; unsigned long rank_size_id; unsigned long num_ranks; unsigned long baseadd_size; unsigned long i; unsigned long bank_0_populated = 0; - unsigned long total_size = 0; + phys_size_t total_size = 0; /*------------------------------------------------------------------ * Reset the rank_base_address. @@ -2289,6 +2310,11 @@ static void program_ecc(unsigned long *dimm_populated, if (ecc == 0) return; + if (sdram_memsize() > CONFIG_MAX_MEM_MAPPED) { + printf("\nWarning: Can't enable ECC on systems with more than 2GB of SDRAM!\n"); + return; + } + mfsdram(SDRAM_MCOPT1, mcopt1); mfsdram(SDRAM_MCOPT2, mcopt2); @@ -2441,6 +2467,7 @@ static int short_mem_test(void) u32 bxcf; int i; int j; + phys_size_t base_addr; u32 test[NUMMEMTESTS][NUMMEMWORDS] = { {0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF}, @@ -2467,10 +2494,17 @@ static int short_mem_test(void) if ((bxcf & SDRAM_BXCF_M_BE_MASK) == SDRAM_BXCF_M_BE_ENABLE) { /* Bank is enabled */ + /* + * Only run test on accessable memory (below 2GB) + */ + base_addr = SDRAM_RXBAS_SDBA_DECODE(mfdcr_any(SDRAM_R0BAS+bxcr_num)); + if (base_addr >= CONFIG_MAX_MEM_MAPPED) + continue; + /*------------------------------------------------------------------ * Run the short memory test. *-----------------------------------------------------------------*/ - membase = (u32 *)(SDRAM_RXBAS_SDBA_DECODE(mfdcr_any(SDRAM_R0BAS+bxcr_num))); + membase = (u32 *)(u32)base_addr; for (i = 0; i < NUMMEMTESTS; i++) { for (j = 0; j < NUMMEMWORDS; j++) { diff --git a/include/asm-ppc/ppc4xx-sdram.h b/include/asm-ppc/ppc4xx-sdram.h index 83931f17f5..e151f0c113 100644 --- a/include/asm-ppc/ppc4xx-sdram.h +++ b/include/asm-ppc/ppc4xx-sdram.h @@ -284,8 +284,8 @@ #if defined(CONFIG_440SPE) || \ defined(CONFIG_460EX) || defined(CONFIG_460GT) #define SDRAM_RXBAS_SDBA_MASK 0xFFE00000 /* Base address */ -#define SDRAM_RXBAS_SDBA_ENCODE(n) ((((u32)(n))&0xFFE00000)>>2) -#define SDRAM_RXBAS_SDBA_DECODE(n) ((((u32)(n))&0xFFE00000)<<2) +#define SDRAM_RXBAS_SDBA_ENCODE(n) ((u32)(((phys_size_t)(n) >> 2) & 0xFFE00000)) +#define SDRAM_RXBAS_SDBA_DECODE(n) ((((phys_size_t)(n)) & 0xFFE00000) << 2) #endif /* CONFIG_440SPE */ #if defined(CONFIG_440SP) #define SDRAM_RXBAS_SDBA_MASK 0xFF800000 /* Base address */ diff --git a/include/configs/katmai.h b/include/configs/katmai.h index d3789bd67a..f07e470683 100644 --- a/include/configs/katmai.h +++ b/include/configs/katmai.h @@ -41,6 +41,13 @@ #define CFG_4xx_RESET_TYPE 0x2 /* use chip reset on this board */ /* + * Enable this board for more than 2GB of SDRAM + */ +#define CONFIG_PHYS_64BIT +#define CONFIG_VERY_BIG_RAM +#define CONFIG_MAX_MEM_MAPPED ((phys_size_t)2 << 30) + +/* * Include common defines/options for all AMCC eval boards */ #define CONFIG_HOSTNAME katmai |
