diff options
36 files changed, 115 insertions, 248 deletions
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Makefile b/arch/arm/cpu/armv8/fsl-layerscape/Makefile index cce74052f7..5f86ef90d2 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Makefile +++ b/arch/arm/cpu/armv8/fsl-layerscape/Makefile @@ -25,10 +25,6 @@ ifneq ($(CONFIG_LS2080A),) obj-$(CONFIG_SYS_HAS_SERDES) += ls2080a_serdes.o endif -ifneq ($(CONFIG_LS2085A),) -obj-$(CONFIG_SYS_HAS_SERDES) += ls2080a_serdes.o -endif - ifneq ($(CONFIG_LS1043A),) obj-$(CONFIG_SYS_HAS_SERDES) += ls1043a_serdes.o endif diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c index 4b9e209054..d93990036b 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c @@ -538,12 +538,12 @@ int print_cpuinfo(void) struct sys_info sysinfo; char buf[32]; unsigned int i, core; - u32 type, rcw; + u32 type, rcw, svr = gur_in32(&gur->svr); puts("SoC: "); cpu_name(buf); - printf(" %s (0x%x)\n", buf, gur_in32(&gur->svr)); + printf(" %s (0x%x)\n", buf, svr); memset((u8 *)buf, 0x00, ARRAY_SIZE(buf)); get_sys_info(&sysinfo); puts("Clock Configuration:"); @@ -564,7 +564,10 @@ int print_cpuinfo(void) printf(" FMAN: %-4s MHz", strmhz(buf, sysinfo.freq_fman[0])); #endif #ifdef CONFIG_SYS_FSL_HAS_DP_DDR - printf(" DP-DDR: %-4s MT/s", strmhz(buf, sysinfo.freq_ddrbus2)); + if (soc_has_dp_ddr()) { + printf(" DP-DDR: %-4s MT/s", + strmhz(buf, sysinfo.freq_ddrbus2)); + } #endif puts("\n"); diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c index 81cf47049f..d580a43b41 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c @@ -97,9 +97,13 @@ void get_sys_info(struct sys_info *sys_info) FSL_CHASSIS3_RCWSR0_MEM_PLL_RAT_SHIFT) & FSL_CHASSIS3_RCWSR0_MEM_PLL_RAT_MASK; #ifdef CONFIG_SYS_FSL_HAS_DP_DDR - sys_info->freq_ddrbus2 *= (gur_in32(&gur->rcwsr[0]) >> + if (soc_has_dp_ddr()) { + sys_info->freq_ddrbus2 *= (gur_in32(&gur->rcwsr[0]) >> FSL_CHASSIS3_RCWSR0_MEM2_PLL_RAT_SHIFT) & FSL_CHASSIS3_RCWSR0_MEM2_PLL_RAT_MASK; + } else { + sys_info->freq_ddrbus2 = 0; + } #endif for (i = 0; i < CONFIG_SYS_FSL_NUM_CC_PLLS; i++) { diff --git a/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S b/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S index 9c69ed13b4..04831ca5bb 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S +++ b/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S @@ -20,7 +20,7 @@ ENTRY(lowlevel_init) #ifdef CONFIG_FSL_LSCH3 /* Set Wuo bit for RN-I 20 */ -#if defined(CONFIG_LS2085A) || defined (CONFIG_LS2080A) +#ifdef CONFIG_LS2080A ldr x0, =CCI_AUX_CONTROL_BASE(20) ldr x1, =0x00000010 bl ccn504_set_aux diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c index a76447ec27..0cb010012e 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c @@ -18,7 +18,31 @@ DECLARE_GLOBAL_DATA_PTR; -#if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A) +bool soc_has_dp_ddr(void) +{ + struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); + u32 svr = gur_in32(&gur->svr); + + /* LS2085A has DP_DDR */ + if (SVR_SOC_VER(svr) == SVR_LS2085) + return true; + + return false; +} + +bool soc_has_aiop(void) +{ + struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); + u32 svr = gur_in32(&gur->svr); + + /* LS2085A has AIOP */ + if (SVR_SOC_VER(svr) == SVR_LS2085) + return true; + + return false; +} + +#ifdef CONFIG_LS2080A /* * This erratum requires setting a value to eddrtqcr1 to * optimal the DDR performance. diff --git a/arch/arm/cpu/armv8/fsl-layerscape/spl.c b/arch/arm/cpu/armv8/fsl-layerscape/spl.c index f434c443ed..c1229c88af 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/spl.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/spl.c @@ -46,7 +46,7 @@ void board_init_f(ulong dummy) { /* Clear global data */ memset((void *)gd, 0, sizeof(gd_t)); -#if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A) +#ifdef CONFIG_LS2080A arch_cpu_init(); #endif #ifdef CONFIG_FSL_IFC @@ -54,7 +54,7 @@ void board_init_f(ulong dummy) #endif board_early_init_f(); timer_init(); -#if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A) +#ifdef CONFIG_LS2080A env_init(); #endif get_clocks(); diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h index ceefe431fd..10d17b2bef 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/config.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h @@ -23,16 +23,11 @@ */ #define CONFIG_SYS_MEM_RESERVE_SECURE (2048 * 1024) /* 2MB */ -#if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A) +#ifdef CONFIG_LS2080A #define CONFIG_MAX_CPUS 16 #define CONFIG_SYS_FSL_IFC_BANK_COUNT 8 -#ifdef CONFIG_LS2080A -#define CONFIG_NUM_DDR_CONTROLLERS 2 -#endif -#ifdef CONFIG_LS2085A #define CONFIG_NUM_DDR_CONTROLLERS 3 -#define CONFIG_SYS_FSL_HAS_DP_DDR -#endif +#define CONFIG_SYS_FSL_HAS_DP_DDR /* Runtime check to confirm */ #define CONFIG_SYS_FSL_CLUSTER_CLOCKS { 1, 1, 4, 4 } #define SRDS_MAX_LANES 8 #define CONFIG_SYS_FSL_SRDS_1 diff --git a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h index 905494232f..702b9faabd 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h @@ -206,7 +206,7 @@ static const struct sys_mmu_table final_mmu_table[] = { { CONFIG_SYS_PCIE3_PHYS_ADDR, CONFIG_SYS_PCIE3_PHYS_ADDR, CONFIG_SYS_PCIE3_PHYS_SIZE, MT_DEVICE_NGNRNE, PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN }, -#if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A) +#ifdef CONFIG_LS2080A { CONFIG_SYS_PCIE4_PHYS_ADDR, CONFIG_SYS_PCIE4_PHYS_ADDR, CONFIG_SYS_PCIE4_PHYS_SIZE, MT_DEVICE_NGNRNE, PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN }, diff --git a/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h b/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h index d1fbde79d5..f71c2c1773 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h @@ -9,7 +9,7 @@ #include <config.h> -#if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A) +#ifdef CONFIG_LS2080A enum srds_prtcl { NONE = 0, PCIE1, diff --git a/arch/arm/include/asm/arch-fsl-layerscape/soc.h b/arch/arm/include/asm/arch-fsl-layerscape/soc.h index 56989e1e08..831d81764e 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/soc.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/soc.h @@ -94,4 +94,7 @@ void cpu_name(char *name); #ifdef CONFIG_SYS_FSL_ERRATUM_A009635 void erratum_a009635(void); #endif + +bool soc_has_dp_ddr(void); +bool soc_has_aiop(void); #endif /* _ASM_ARMV8_FSL_LAYERSCAPE_SOC_H_ */ diff --git a/arch/arm/include/asm/fsl_secure_boot.h b/arch/arm/include/asm/fsl_secure_boot.h index d576f2ef45..53cd7550a0 100644 --- a/arch/arm/include/asm/fsl_secure_boot.h +++ b/arch/arm/include/asm/fsl_secure_boot.h @@ -44,15 +44,14 @@ #endif -#if defined(CONFIG_LS1043A) || defined(CONFIG_LS2080A) ||\ - defined(CONFIG_LS2085A) +#if defined(CONFIG_LS1043A) || defined(CONFIG_LS2080A) /* For LS1043 (ARMv8), ESBC image Address in Header is 64 bit - * Similiarly for LS2080 and LS2085 + * Similiarly for LS2080 */ #define CONFIG_ESBC_ADDR_64BIT #endif -#if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A) +#ifdef CONFIG_LS2080A #define CONFIG_EXTRA_ENV \ "setenv fdt_high 0xa0000000;" \ "setenv initrd_high 0xcfffffff;" \ @@ -66,12 +65,11 @@ /* Copying Bootscript and Header to DDR from NOR for LS2 and for rest, from * Non-XIP Memory (Nand/SD)*/ -#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_LS2080A) ||\ - defined(CONFIG_LS2085A) +#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_LS2080A) #define CONFIG_BOOTSCRIPT_COPY_RAM #endif /* The address needs to be modified according to NOR and DDR memory map */ -#if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A) +#ifdef CONFIG_LS2080A #define CONFIG_BS_HDR_ADDR_FLASH 0x583920000 #define CONFIG_BS_ADDR_FLASH 0x583900000 #define CONFIG_BS_HDR_ADDR_RAM 0xa3920000 diff --git a/board/freescale/ls2080a/MAINTAINERS b/board/freescale/ls2080a/MAINTAINERS index 975ea2da48..c8dac99889 100644 --- a/board/freescale/ls2080a/MAINTAINERS +++ b/board/freescale/ls2080a/MAINTAINERS @@ -6,5 +6,3 @@ F: include/configs/ls2080a_emu.h F: configs/ls2080a_emu_defconfig F: include/configs/ls2080a_simu.h F: configs/ls2080a_simu_defconfig -F: configs/ls2085a_emu_defconfig -F: configs/ls2085a_simu_defconfig diff --git a/board/freescale/ls2080a/ddr.c b/board/freescale/ls2080a/ddr.c index 56c5d96e99..1827ddca69 100644 --- a/board/freescale/ls2080a/ddr.c +++ b/board/freescale/ls2080a/ddr.c @@ -7,6 +7,7 @@ #include <common.h> #include <fsl_ddr_sdram.h> #include <fsl_ddr_dimm_params.h> +#include <asm/arch/soc.h> #include "ddr.h" DECLARE_GLOBAL_DATA_PTR; @@ -201,22 +202,24 @@ void dram_init_banksize(void) } #ifdef CONFIG_SYS_DP_DDR_BASE_PHY - /* initialize DP-DDR here */ - puts("DP-DDR: "); - /* - * DDR controller use 0 as the base address for binding. - * It is mapped to CONFIG_SYS_DP_DDR_BASE for core to access. - */ - dp_ddr_size = fsl_other_ddr_sdram(CONFIG_SYS_DP_DDR_BASE_PHY, + if (soc_has_dp_ddr()) { + /* initialize DP-DDR here */ + puts("DP-DDR: "); + /* + * DDR controller use 0 as the base address for binding. + * It is mapped to CONFIG_SYS_DP_DDR_BASE for core to access. + */ + dp_ddr_size = fsl_other_ddr_sdram(CONFIG_SYS_DP_DDR_BASE_PHY, CONFIG_DP_DDR_CTRL, CONFIG_DP_DDR_NUM_CTRLS, CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR, NULL, NULL, NULL); - if (dp_ddr_size) { - gd->bd->bi_dram[2].start = CONFIG_SYS_DP_DDR_BASE; - gd->bd->bi_dram[2].size = dp_ddr_size; - } else { - puts("Not detected"); + if (dp_ddr_size) { + gd->bd->bi_dram[2].start = CONFIG_SYS_DP_DDR_BASE; + gd->bd->bi_dram[2].size = dp_ddr_size; + } else { + puts("Not detected"); + } } #endif } diff --git a/board/freescale/ls2080a/ls2080a.c b/board/freescale/ls2080a/ls2080a.c index ace0d79543..00337d7091 100644 --- a/board/freescale/ls2080a/ls2080a.c +++ b/board/freescale/ls2080a/ls2080a.c @@ -42,7 +42,7 @@ void detail_board_ddr_info(void) print_size(gd->bd->bi_dram[0].size + gd->bd->bi_dram[1].size, ""); print_ddr_info(0); #ifdef CONFIG_SYS_FSL_HAS_DP_DDR - if (gd->bd->bi_dram[2].size) { + if (soc_has_dp_ddr() && gd->bd->bi_dram[2].size) { puts("\nDP-DDR "); print_size(gd->bd->bi_dram[2].size, ""); print_ddr_info(CONFIG_DP_DDR_CTRL); diff --git a/board/freescale/ls2080aqds/MAINTAINERS b/board/freescale/ls2080aqds/MAINTAINERS index 558cef1190..7d3bfc8e4e 100644 --- a/board/freescale/ls2080aqds/MAINTAINERS +++ b/board/freescale/ls2080aqds/MAINTAINERS @@ -6,11 +6,8 @@ F: board/freescale/ls2080a/ls2080aqds.c F: include/configs/ls2080aqds.h F: configs/ls2080aqds_defconfig F: configs/ls2080aqds_nand_defconfig -F: configs/ls2085aqds_defconfig -F: configs/ls2085aqds_nand_defconfig LS2080A_SECURE_BOOT BOARD M: Saksham Jain <saksham.jain@nxp.freescale.com> S: Maintained F: configs/ls2080aqds_SECURE_BOOT_defconfig -F: configs/ls2085aqds_SECURE_BOOT_defconfig diff --git a/board/freescale/ls2080aqds/ddr.c b/board/freescale/ls2080aqds/ddr.c index 9fb5e112db..fcb03665bf 100644 --- a/board/freescale/ls2080aqds/ddr.c +++ b/board/freescale/ls2080aqds/ddr.c @@ -7,6 +7,7 @@ #include <common.h> #include <fsl_ddr_sdram.h> #include <fsl_ddr_dimm_params.h> +#include <asm/arch/soc.h> #include "ddr.h" DECLARE_GLOBAL_DATA_PTR; @@ -201,22 +202,24 @@ void dram_init_banksize(void) } #ifdef CONFIG_SYS_DP_DDR_BASE_PHY - /* initialize DP-DDR here */ - puts("DP-DDR: "); - /* - * DDR controller use 0 as the base address for binding. - * It is mapped to CONFIG_SYS_DP_DDR_BASE for core to access. - */ - dp_ddr_size = fsl_other_ddr_sdram(CONFIG_SYS_DP_DDR_BASE_PHY, + if (soc_has_dp_ddr()) { + /* initialize DP-DDR here */ + puts("DP-DDR: "); + /* + * DDR controller use 0 as the base address for binding. + * It is mapped to CONFIG_SYS_DP_DDR_BASE for core to access. + */ + dp_ddr_size = fsl_other_ddr_sdram(CONFIG_SYS_DP_DDR_BASE_PHY, CONFIG_DP_DDR_CTRL, CONFIG_DP_DDR_NUM_CTRLS, CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR, NULL, NULL, NULL); - if (dp_ddr_size) { - gd->bd->bi_dram[2].start = CONFIG_SYS_DP_DDR_BASE; - gd->bd->bi_dram[2].size = dp_ddr_size; - } else { - puts("Not detected"); + if (dp_ddr_size) { + gd->bd->bi_dram[2].start = CONFIG_SYS_DP_DDR_BASE; + gd->bd->bi_dram[2].size = dp_ddr_size; + } else { + puts("Not detected"); + } } #endif } diff --git a/board/freescale/ls2080aqds/ls2080aqds.c b/board/freescale/ls2080aqds/ls2080aqds.c index e1a521d080..b3bd40afb7 100644 --- a/board/freescale/ls2080aqds/ls2080aqds.c +++ b/board/freescale/ls2080aqds/ls2080aqds.c @@ -228,7 +228,7 @@ void detail_board_ddr_info(void) print_size(gd->bd->bi_dram[0].size + gd->bd->bi_dram[1].size, ""); print_ddr_info(0); #ifdef CONFIG_SYS_FSL_HAS_DP_DDR - if (gd->bd->bi_dram[2].size) { + if (soc_has_dp_ddr() && gd->bd->bi_dram[2].size) { puts("\nDP-DDR "); print_size(gd->bd->bi_dram[2].size, ""); print_ddr_info(CONFIG_DP_DDR_CTRL); diff --git a/board/freescale/ls2080ardb/MAINTAINERS b/board/freescale/ls2080ardb/MAINTAINERS index 0817711d08..5562917ec9 100644 --- a/board/freescale/ls2080ardb/MAINTAINERS +++ b/board/freescale/ls2080ardb/MAINTAINERS @@ -6,11 +6,8 @@ F: board/freescale/ls2080a/ls2080ardb.c F: include/configs/ls2080ardb.h F: configs/ls2080ardb_defconfig F: configs/ls2080ardb_nand_defconfig -F: configs/ls2085ardb_defconfig -F: configs/ls2085ardb_nand_defconfig LS2080A_SECURE_BOOT BOARD M: Saksham Jain <saksham.jain@nxp.freescale.com> S: Maintained F: configs/ls2080ardb_SECURE_BOOT_defconfig -F: configs/ls2085ardb_SECURE_BOOT_defconfig diff --git a/board/freescale/ls2080ardb/ddr.c b/board/freescale/ls2080ardb/ddr.c index 6c191738ec..a04d21be13 100644 --- a/board/freescale/ls2080ardb/ddr.c +++ b/board/freescale/ls2080ardb/ddr.c @@ -7,6 +7,7 @@ #include <common.h> #include <fsl_ddr_sdram.h> #include <fsl_ddr_dimm_params.h> +#include <asm/arch/soc.h> #include "ddr.h" DECLARE_GLOBAL_DATA_PTR; @@ -201,22 +202,24 @@ void dram_init_banksize(void) } #ifdef CONFIG_SYS_DP_DDR_BASE_PHY - /* initialize DP-DDR here */ - puts("DP-DDR: "); - /* - * DDR controller use 0 as the base address for binding. - * It is mapped to CONFIG_SYS_DP_DDR_BASE for core to access. - */ - dp_ddr_size = fsl_other_ddr_sdram(CONFIG_SYS_DP_DDR_BASE_PHY, + if (soc_has_dp_ddr()) { + /* initialize DP-DDR here */ + puts("DP-DDR: "); + /* + * DDR controller use 0 as the base address for binding. + * It is mapped to CONFIG_SYS_DP_DDR_BASE for core to access. + */ + dp_ddr_size = fsl_other_ddr_sdram(CONFIG_SYS_DP_DDR_BASE_PHY, CONFIG_DP_DDR_CTRL, CONFIG_DP_DDR_NUM_CTRLS, CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR, NULL, NULL, NULL); - if (dp_ddr_size) { - gd->bd->bi_dram[2].start = CONFIG_SYS_DP_DDR_BASE; - gd->bd->bi_dram[2].size = dp_ddr_size; - } else { - puts("Not detected"); + if (dp_ddr_size) { + gd->bd->bi_dram[2].start = CONFIG_SYS_DP_DDR_BASE; + gd->bd->bi_dram[2].size = dp_ddr_size; + } else { + puts("Not detected"); + } } #endif } diff --git a/board/freescale/ls2080ardb/ls2080ardb.c b/board/freescale/ls2080ardb/ls2080ardb.c index 8201048193..fb39af6445 100644 --- a/board/freescale/ls2080ardb/ls2080ardb.c +++ b/board/freescale/ls2080ardb/ls2080ardb.c @@ -207,7 +207,7 @@ void detail_board_ddr_info(void) print_size(gd->bd->bi_dram[0].size + gd->bd->bi_dram[1].size, ""); print_ddr_info(0); #ifdef CONFIG_SYS_FSL_HAS_DP_DDR - if (gd->bd->bi_dram[2].size) { + if (soc_has_dp_ddr() && gd->bd->bi_dram[2].size) { puts("\nDP-DDR "); print_size(gd->bd->bi_dram[2].size, ""); print_ddr_info(CONFIG_DP_DDR_CTRL); diff --git a/configs/ls2085a_emu_defconfig b/configs/ls2085a_emu_defconfig deleted file mode 100644 index 036bb6f5ce..0000000000 --- a/configs/ls2085a_emu_defconfig +++ /dev/null @@ -1,20 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_LS2080A_EMU=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="EMU,SYS_FSL_DDR4, LS2085A" -# CONFIG_CMD_CONSOLE is not set -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_XIMG is not set -# CONFIG_CMD_EDITENV is not set -# CONFIG_CMD_ENV_EXISTS is not set -# CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_ITEST is not set -# CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NFS is not set -# CONFIG_CMD_MISC is not set -CONFIG_SYS_NS16550=y -CONFIG_OF_LIBFDT=y diff --git a/configs/ls2085a_simu_defconfig b/configs/ls2085a_simu_defconfig deleted file mode 100644 index 0702bab71b..0000000000 --- a/configs/ls2085a_simu_defconfig +++ /dev/null @@ -1,21 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_LS2080A_SIMU=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="SIMU, LS2085A" -# CONFIG_CMD_CONSOLE is not set -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_XIMG is not set -# CONFIG_CMD_EDITENV is not set -# CONFIG_CMD_ENV_EXISTS is not set -# CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_ITEST is not set -# CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NFS is not set -# CONFIG_CMD_MISC is not set -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_SYS_NS16550=y -CONFIG_OF_LIBFDT=y diff --git a/configs/ls2085aqds_SECURE_BOOT_defconfig b/configs/ls2085aqds_SECURE_BOOT_defconfig deleted file mode 100644 index f13ee41c77..0000000000 --- a/configs/ls2085aqds_SECURE_BOOT_defconfig +++ /dev/null @@ -1,20 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_LS2080AQDS=y -# CONFIG_SYS_MALLOC_F is not set -CONFIG_DM_SPI=y -CONFIG_DM_SPI_FLASH=y -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-qds" -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, LS2085A, SECURE_BOOT" -# CONFIG_CMD_SETEXPR is not set -CONFIG_OF_CONTROL=y -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_DM=y -CONFIG_NETDEVICES=y -CONFIG_E1000=y -CONFIG_SYS_NS16550=y -CONFIG_FSL_DSPI=y -CONFIG_RSA=y diff --git a/configs/ls2085aqds_defconfig b/configs/ls2085aqds_defconfig deleted file mode 100644 index a5c8388c41..0000000000 --- a/configs/ls2085aqds_defconfig +++ /dev/null @@ -1,19 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_LS2080AQDS=y -# CONFIG_SYS_MALLOC_F is not set -CONFIG_DM_SPI=y -CONFIG_DM_SPI_FLASH=y -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-qds" -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, LS2085A" -# CONFIG_CMD_SETEXPR is not set -CONFIG_OF_CONTROL=y -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_DM=y -CONFIG_NETDEVICES=y -CONFIG_E1000=y -CONFIG_SYS_NS16550=y -CONFIG_FSL_DSPI=y diff --git a/configs/ls2085aqds_nand_defconfig b/configs/ls2085aqds_nand_defconfig deleted file mode 100644 index d355c9abcc..0000000000 --- a/configs/ls2085aqds_nand_defconfig +++ /dev/null @@ -1,14 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_LS2080AQDS=y -CONFIG_SPL=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,NAND,LS2085A" -# CONFIG_CMD_SETEXPR is not set -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_NETDEVICES=y -CONFIG_E1000=y -CONFIG_SYS_NS16550=y -CONFIG_OF_LIBFDT=y diff --git a/configs/ls2085ardb_SECURE_BOOT_defconfig b/configs/ls2085ardb_SECURE_BOOT_defconfig deleted file mode 100644 index aa6650849c..0000000000 --- a/configs/ls2085ardb_SECURE_BOOT_defconfig +++ /dev/null @@ -1,20 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_LS2080ARDB=y -# CONFIG_SYS_MALLOC_F is not set -CONFIG_DM_SPI=y -CONFIG_DM_SPI_FLASH=y -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-rdb" -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, LS2085A, SECURE_BOOT" -# CONFIG_CMD_SETEXPR is not set -CONFIG_OF_CONTROL=y -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_DM=y -CONFIG_NETDEVICES=y -CONFIG_E1000=y -CONFIG_SYS_NS16550=y -CONFIG_FSL_DSPI=y -CONFIG_RSA=y diff --git a/configs/ls2085ardb_defconfig b/configs/ls2085ardb_defconfig deleted file mode 100644 index fe46dbc4f6..0000000000 --- a/configs/ls2085ardb_defconfig +++ /dev/null @@ -1,19 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_LS2080ARDB=y -# CONFIG_SYS_MALLOC_F is not set -CONFIG_DM_SPI=y -CONFIG_DM_SPI_FLASH=y -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-rdb" -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, LS2085A" -# CONFIG_CMD_SETEXPR is not set -CONFIG_OF_CONTROL=y -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_DM=y -CONFIG_NETDEVICES=y -CONFIG_E1000=y -CONFIG_SYS_NS16550=y -CONFIG_FSL_DSPI=y diff --git a/configs/ls2085ardb_nand_defconfig b/configs/ls2085ardb_nand_defconfig deleted file mode 100644 index 5fb0cf6aaa..0000000000 --- a/configs/ls2085ardb_nand_defconfig +++ /dev/null @@ -1,14 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_LS2080ARDB=y -CONFIG_SPL=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,NAND,LS2085A" -# CONFIG_CMD_SETEXPR is not set -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_NETDEVICES=y -CONFIG_E1000=y -CONFIG_SYS_NS16550=y -CONFIG_OF_LIBFDT=y diff --git a/doc/device-tree-bindings/serial/8250.txt b/doc/device-tree-bindings/serial/8250.txt index 91d5ab0e60..ba8edae0ee 100644 --- a/doc/device-tree-bindings/serial/8250.txt +++ b/doc/device-tree-bindings/serial/8250.txt @@ -53,7 +53,7 @@ Note: Represents a single port that is compatible with the DUART found on many Freescale chips (examples include mpc8349, mpc8548, - mpc8641d, p4080 and ls2085a). + mpc8641d, p4080 and ls2080a). Example: diff --git a/drivers/crypto/fsl/jr.c b/drivers/crypto/fsl/jr.c index 3fc418a8c4..8bc517dadc 100644 --- a/drivers/crypto/fsl/jr.c +++ b/drivers/crypto/fsl/jr.c @@ -545,12 +545,12 @@ int sec_init(void) /* * Modifying CAAM Read/Write Attributes - * For LS2080A and LS2085A + * For LS2080A * For AXI Write - Cacheable, Write Back, Write allocate * For AXI Read - Cacheable, Read allocate - * Only For LS2080a and LS2085a, to solve CAAM coherency issues + * Only For LS2080a, to solve CAAM coherency issues */ -#if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A) +#ifdef CONFIG_LS2080A mcr = (mcr & ~MCFGR_AWCACHE_MASK) | (0xb << MCFGR_AWCACHE_SHIFT); mcr = (mcr & ~MCFGR_ARCACHE_MASK) | (0x6 << MCFGR_ARCACHE_SHIFT); #else diff --git a/drivers/net/fsl-mc/mc.c b/drivers/net/fsl-mc/mc.c index d2b8b5c47f..1811b0fe1a 100644 --- a/drivers/net/fsl-mc/mc.c +++ b/drivers/net/fsl-mc/mc.c @@ -356,6 +356,12 @@ static unsigned long get_mc_boot_timeout_ms(void) } #ifdef CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET + +__weak bool soc_has_aiop(void) +{ + return false; +} + static int load_mc_aiop_img(u64 aiop_fw_addr) { u64 mc_ram_addr = mc_get_dram_addr(); @@ -363,6 +369,9 @@ static int load_mc_aiop_img(u64 aiop_fw_addr) void *aiop_img; #endif + /* Check if AIOP is available */ + if (!soc_has_aiop()) + return -ENODEV; /* * Load the MC AIOP image in the MC private DRAM block: */ @@ -1235,6 +1244,7 @@ static int do_fsl_mc(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) aiop_fw_addr = simple_strtoull(argv[3], NULL, 16); + /* if SoC doesn't have AIOP, err = -ENODEV */ err = load_mc_aiop_img(aiop_fw_addr); if (!err) printf("fsl-mc: AIOP FW applied\n"); diff --git a/drivers/net/ldpaa_eth/Makefile b/drivers/net/ldpaa_eth/Makefile index 74c49165d5..5587aa618d 100644 --- a/drivers/net/ldpaa_eth/Makefile +++ b/drivers/net/ldpaa_eth/Makefile @@ -7,4 +7,3 @@ obj-y += ldpaa_wriop.o obj-y += ldpaa_eth.o obj-$(CONFIG_LS2080A) += ls2080a.o -obj-$(CONFIG_LS2085A) += ls2080a.o diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h index 13ce349446..57e2a2919c 100644 --- a/include/configs/ls2080a_common.h +++ b/include/configs/ls2080a_common.h @@ -171,10 +171,9 @@ unsigned long long get_qixis_addr(void); #define CONFIG_SYS_LS_MC_DRAM_DPC_OFFSET 0x00F00000 #define CONFIG_SYS_LS_MC_DPL_MAX_LENGTH 0x20000 #define CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET 0x00F20000 -#ifdef CONFIG_LS2085A +/* For LS2085A */ #define CONFIG_SYS_LS_MC_AIOP_IMG_MAX_LENGTH 0x200000 #define CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET 0x07000000 -#endif /* * Carve out a DDR region which will not be used by u-boot/Linux @@ -198,10 +197,6 @@ unsigned long long get_qixis_addr(void); #define FSL_PCIE_COMPAT "fsl,ls2080a-pcie" #endif -#ifdef CONFIG_LS2085A -#define FSL_PCIE_COMPAT "fsl,ls2085a-pcie" -#endif - #define CONFIG_SYS_PCI_64BIT #define CONFIG_SYS_PCIE_CFG0_PHYS_OFF 0x00000000 diff --git a/include/configs/ls2080a_emu.h b/include/configs/ls2080a_emu.h index 534ebb6735..f4ace856b8 100644 --- a/include/configs/ls2080a_emu.h +++ b/include/configs/ls2080a_emu.h @@ -9,15 +9,8 @@ #include "ls2080a_common.h" -#ifdef CONFIG_LS2080A #define CONFIG_IDENT_STRING " LS2080A-EMU" #define CONFIG_BOOTP_VCI_STRING "U-Boot.LS2080A-EMU" -#endif - -#ifdef CONFIG_LS2085A -#define CONFIG_IDENT_STRING " LS2085A-EMU" -#define CONFIG_BOOTP_VCI_STRING "U-Boot.LS2085A-EMU" -#endif #define CONFIG_SYS_CLK_FREQ 100000000 #define CONFIG_DDR_CLK_FREQ 133333333 diff --git a/include/configs/ls2080a_simu.h b/include/configs/ls2080a_simu.h index 2c2ce7bfec..0dbe95f406 100644 --- a/include/configs/ls2080a_simu.h +++ b/include/configs/ls2080a_simu.h @@ -9,15 +9,8 @@ #include "ls2080a_common.h" -#ifdef CONFIG_LS2080A #define CONFIG_IDENT_STRING " LS2080A-SIMU" #define CONFIG_BOOTP_VCI_STRING "U-Boot.LS2080A-SIMU" -#endif - -#ifdef CONFIG_LS2085A -#define CONFIG_IDENT_STRING " LS2085A-SIMU" -#define CONFIG_BOOTP_VCI_STRING "U-Boot.LS2085A-SIMU" -#endif #define CONFIG_SYS_CLK_FREQ 100000000 #define CONFIG_DDR_CLK_FREQ 133333333 diff --git a/include/linux/usb/xhci-fsl.h b/include/linux/usb/xhci-fsl.h index e922e322eb..c5e42e69fe 100644 --- a/include/linux/usb/xhci-fsl.h +++ b/include/linux/usb/xhci-fsl.h @@ -55,7 +55,7 @@ struct fsl_xhci { #define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_LS102XA_XHCI_USB1_ADDR #define CONFIG_SYS_FSL_XHCI_USB2_ADDR 0 #define CONFIG_SYS_FSL_XHCI_USB3_ADDR 0 -#elif defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A) +#elif defined(CONFIG_LS2080A) #define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_LS2080A_XHCI_USB1_ADDR #define CONFIG_SYS_FSL_XHCI_USB2_ADDR CONFIG_SYS_LS2080A_XHCI_USB2_ADDR #define CONFIG_SYS_FSL_XHCI_USB3_ADDR 0 |
