zipitz2: restore board support

zipitz2 was dropped in 49d8899ba9c26335e4a12e01c18028fc5e40c796

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>

1 files changed, 224 insertions, 0 deletions

diff --git a/include/configs/zipitz2.h b/include/configs/zipitz2.h
new file mode 100644
index 0000000000..586a445f3e
--- /dev/null
+++ b/include/configs/zipitz2.h
@@ -0,0 +1,224 @@
+/*
+ * Aeronix Zipit Z2 configuration file
+ *
+ * Copyright (C) 2009-2010 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Board Configuration Options
+ */
+#define	CONFIG_CPU_PXA27X		1	/* Marvell PXA270 CPU */
+#define	CONFIG_SYS_TEXT_BASE		0x0
+
+#undef	CONFIG_BOARD_LATE_INIT
+#undef	CONFIG_SKIP_LOWLEVEL_INIT
+#define	CONFIG_PREBOOT
+
+/*
+ * Environment settings
+ */
+#define	CONFIG_ENV_OVERWRITE
+#define CONFIG_ENV_IS_IN_FLASH		1
+#define CONFIG_ENV_ADDR			0x40000
+#define CONFIG_ENV_SIZE			0x10000
+
+#define CONFIG_SYS_DCACHE_OFF
+
+#define	CONFIG_SYS_MALLOC_LEN		(128*1024)
+#define	CONFIG_ARCH_CPU_INIT
+
+#define	CONFIG_BOOTCOMMAND						\
+	"if mmc rescan && ext2load mmc 0 0xa0000000 boot/uboot.script ;"\
+	"then "								\
+		"source 0xa0000000; "					\
+	"else "								\
+		"bootm 0x50000; "					\
+	"fi; "
+#define	CONFIG_BOOTARGS							\
+	"console=tty0 console=ttyS2,115200 fbcon=rotate:3"
+#define	CONFIG_TIMESTAMP
+#define	CONFIG_BOOTDELAY		2	/* Autoboot delay */
+#define	CONFIG_CMDLINE_TAG
+#define	CONFIG_SETUP_MEMORY_TAGS
+#define	CONFIG_SYS_TEXT_BASE		0x0
+#define	CONFIG_LZMA			/* LZMA compression support */
+
+/*
+ * Serial Console Configuration
+ * STUART - the lower serial port on Colibri board
+ */
+#define	CONFIG_PXA_SERIAL
+#define	CONFIG_STUART			1
+#define CONFIG_CONS_INDEX		2
+#define	CONFIG_BAUDRATE			115200
+
+/*
+ * Bootloader Components Configuration
+ */
+#define	CONFIG_CMD_ENV
+#define	CONFIG_CMD_MMC
+#define	CONFIG_CMD_SPI
+
+/*
+ * MMC Card Configuration
+ */
+#ifdef	CONFIG_CMD_MMC
+#define	CONFIG_MMC
+#define	CONFIG_GENERIC_MMC
+#define	CONFIG_PXA_MMC_GENERIC
+#define	CONFIG_SYS_MMC_BASE		0xF0000000
+#define	CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
+#define	CONFIG_DOS_PARTITION
+#endif
+
+/*
+ * SPI and LCD
+ */
+#ifdef	CONFIG_CMD_SPI
+#define	CONFIG_SOFT_SPI
+#define	CONFIG_LCD
+#define	CONFIG_PXA_LCD
+#define	CONFIG_LMS283GF05
+
+#define	SPI_DELAY	udelay(10)
+#define	SPI_SDA(val)	zipitz2_spi_sda(val)
+#define	SPI_SCL(val)	zipitz2_spi_scl(val)
+#define	SPI_READ	zipitz2_spi_read()
+#ifndef	__ASSEMBLY__
+void zipitz2_spi_sda(int);
+void zipitz2_spi_scl(int);
+unsigned char zipitz2_spi_read(void);
+#endif
+#endif
+
+/*
+ * HUSH Shell Configuration
+ */
+#define	CONFIG_SYS_HUSH_PARSER		1
+
+#define	CONFIG_SYS_LONGHELP				/* undef to save memory	*/
+#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size */
+#define	CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		16		/* max number of command args */
+#define	CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
+#define	CONFIG_SYS_DEVICE_NULLDEV	1
+
+/*
+ * Clock Configuration
+ */
+#define CONFIG_SYS_CPUSPEED		0x190		/* standard setting for 312MHz; L=16, N=1.5, A=0, SDCLK!=SystemBus */
+
+/*
+ * SRAM Map
+ */
+#define	PHYS_SRAM			0x5c000000	/* SRAM Bank #1 */
+#define	PHYS_SRAM_SIZE			0x00040000	/* 256k */
+
+/*
+ * DRAM Map
+ */
+#define	CONFIG_NR_DRAM_BANKS		1		/* We have 1 bank of DRAM */
+#define	PHYS_SDRAM_1			0xa0000000	/* SDRAM Bank #1 */
+#define	PHYS_SDRAM_1_SIZE		0x02000000	/* 32 MB */
+
+#define	CONFIG_SYS_DRAM_BASE		0xa0000000	/* CS0 */
+#define	CONFIG_SYS_DRAM_SIZE		0x02000000	/* 32 MB DRAM */
+
+#define CONFIG_SYS_MEMTEST_START	0xa0400000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0xa0800000	/* 4 ... 8 MB in DRAM */
+
+#define	CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_DRAM_BASE
+
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
+#define	CONFIG_SYS_INIT_SP_ADDR		(GENERATED_GBL_DATA_SIZE + PHYS_SRAM + 2048)
+
+/*
+ * NOR FLASH
+ */
+#define PHYS_FLASH_1			0x00000000	/* Flash Bank #1 */
+#define PHYS_FLASH_SIZE			0x00800000	/* 8 MB */
+#define PHYS_FLASH_SECT_SIZE		0x00010000	/* 64 KB sectors */
+#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
+
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER		1
+#define CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_16BIT
+
+#define CONFIG_SYS_MONITOR_BASE		PHYS_FLASH_1
+#define CONFIG_SYS_MONITOR_LEN		PHYS_FLASH_SECT_SIZE
+
+#define CONFIG_SYS_MAX_FLASH_BANKS	1
+#define CONFIG_SYS_MAX_FLASH_SECT	256
+
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
+
+#define CONFIG_SYS_FLASH_ERASE_TOUT	240000
+#define CONFIG_SYS_FLASH_WRITE_TOUT	240000
+#define CONFIG_SYS_FLASH_LOCK_TOUT	240000
+#define CONFIG_SYS_FLASH_UNLOCK_TOUT	240000
+#define CONFIG_SYS_FLASH_PROTECTION
+
+/*
+ * GPIO settings
+ */
+#define CONFIG_SYS_GAFR0_L_VAL	0x02000140
+#define CONFIG_SYS_GAFR0_U_VAL	0x59188000
+#define CONFIG_SYS_GAFR1_L_VAL	0x63900002
+#define CONFIG_SYS_GAFR1_U_VAL	0xaaa03950
+#define CONFIG_SYS_GAFR2_L_VAL	0x0aaaaaaa
+#define CONFIG_SYS_GAFR2_U_VAL	0x29000308
+#define CONFIG_SYS_GAFR3_L_VAL	0x54000000
+#define CONFIG_SYS_GAFR3_U_VAL	0x000000d5
+#define CONFIG_SYS_GPCR0_VAL	0x00000000
+#define CONFIG_SYS_GPCR1_VAL	0x00000020
+#define CONFIG_SYS_GPCR2_VAL	0x00000000
+#define CONFIG_SYS_GPCR3_VAL	0x00000000
+#define CONFIG_SYS_GPDR0_VAL	0xdafcee00
+#define CONFIG_SYS_GPDR1_VAL	0xffa3aaab
+#define CONFIG_SYS_GPDR2_VAL	0x8fe9ffff
+#define CONFIG_SYS_GPDR3_VAL	0x001b1f8a
+#define CONFIG_SYS_GPSR0_VAL	0x06080400
+#define CONFIG_SYS_GPSR1_VAL	0x007f0000
+#define CONFIG_SYS_GPSR2_VAL	0x032a0000
+#define CONFIG_SYS_GPSR3_VAL	0x00000180
+
+#define CONFIG_SYS_PSSR_VAL	0x30
+
+/*
+ * Clock settings
+ */
+#define CONFIG_SYS_CKEN		0x00511220
+#define CONFIG_SYS_CCCR		0x00000190
+
+/*
+ * Memory settings
+ */
+#define CONFIG_SYS_MSC0_VAL	0x2ffc38f8
+#define CONFIG_SYS_MSC1_VAL	0x0000ccd1
+#define CONFIG_SYS_MSC2_VAL	0x0000b884
+#define CONFIG_SYS_MDCNFG_VAL	0x08000ba9
+#define CONFIG_SYS_MDREFR_VAL	0x2011a01e
+#define CONFIG_SYS_MDMRS_VAL	0x00000000
+#define CONFIG_SYS_FLYCNFG_VAL	0x00010001
+#define CONFIG_SYS_SXCNFG_VAL	0x40044004
+
+/*
+ * PCMCIA and CF Interfaces
+ */
+#define CONFIG_SYS_MECR_VAL	0x00000001
+#define CONFIG_SYS_MCMEM0_VAL	0x00014307
+#define CONFIG_SYS_MCMEM1_VAL	0x00014307
+#define CONFIG_SYS_MCATT0_VAL	0x0001c787
+#define CONFIG_SYS_MCATT1_VAL	0x0001c787
+#define CONFIG_SYS_MCIO0_VAL	0x0001430f
+#define CONFIG_SYS_MCIO1_VAL	0x0001430f
+
+#include "pxa-common.h"
+
+#endif	/* __CONFIG_H */