diff options
| author | Wolfgang Denk <wd@denx.de> | 2011-12-07 09:09:58 +0100 |
|---|---|---|
| committer | Wolfgang Denk <wd@denx.de> | 2011-12-07 09:09:58 +0100 |
| commit | c786f54b9ace5d7b20a0404a7deb1bae683cd4e8 (patch) | |
| tree | 8c612b0abb45c0b1bb1ca39df97620a0ab026797 /include | |
| parent | 99dee4b2ef570f289e2b1f105df0fdb8ad57ebd1 (diff) | |
| parent | 15422043c4a213dc5d7d59a337be1ab34c9b2e7f (diff) | |
| download | talos-obmc-uboot-c786f54b9ace5d7b20a0404a7deb1bae683cd4e8.tar.gz talos-obmc-uboot-c786f54b9ace5d7b20a0404a7deb1bae683cd4e8.zip | |
Merge branch 'master' of git://git.denx.de/u-boot-arm
* 'master' of git://git.denx.de/u-boot-arm:
davinci: Remove unwanted memsize.c from hawkboard's nand spl build
devkit8000: Move CONFIG_SYS_TEXT_BASE out of bss
da850evm: pass board revision info to kernel
arch/arm/include/asm/arch-omap5/clocks.h: Fix GCC 4.2 warnings
arch/arm/cpu/armv7/omap-common/clocks-common.c: Fix GCC 4.6 warnings
arch/arm/cpu/armv7/omap-common/spl.c: Fix GCC 4.2 warnings
MX35: flea3: changes due to hardware revision B
MX: serial_mxc: cleanup removing nasty #ifdef
M28: Fix OB1 bug in GPIO driver
MXS: Add static annotations to dma driver
apbh_dma: return error value on timeout
Efika: Configure additional regulators for HDMI output
mx5: Correct a warning in clock.c
MC13892: Add REGMODE0 bits definitions
mx51evk: Configure the pins as GPIOs prior to using gpio_get_value
mx53smd: Configure the pins as GPIOs prior to using gpio_get_value
mx53evk: Configure the pins as GPIOs prior to using gpio_get_value
mx53ard: Configure the pins as GPIOs prior to using gpio_get_value
mx53loco: Configure the pins as GPIOs prior to using gpio_get_value
OMAP3: Add SPL_BOARD_INIT hook
AM3517 CraneBoard: Add SPL support
AM3517: Add SPL support
OMAP3: Add SPL support to omap3_evm
OMAP3: Add SPL support to Beagleboard
OMAP3 SPL: Add identify_nand_chip function
OMAP3 SPL: Rework memory initalization and devkit8000 support
OMAP3: Suffix all Micron memory timing parts with their speed
OMAP3: Add optimal SDRC autorefresh control values
omap3: mem: Add MCFG helper macro
OMAP3: Remove get_mem_type prototype
OMAP3: Change mem_ok to clear again after reading back
OMAP3: Add a helper function to set timings in SDRC
OMAP3: Update SDRC dram_init to always call make_cs1_contiguous()
omap3: mem: Comment enable_gpmc_cs_config more
ARM: davici_emac: Fix condition for number of phy detects
arm: printf() is not available in some SPL configurations
arm, davinci: add support for am1808 based enbw_cmc board
arm, davinci: move misc function in arch tree
arm, board/davinci/common/misc.c: Codingstyle cleanup
arm, davinci, da850: add uart1 tx rx pinmux config
arm, davinci: move davinci_rtc struct to hardware.h
arm, davinci: Remove duplication of pinmux configuration code
arm, hawkboard: Use the pinmux configurations defined in the arch tree
arm, da850evm: Use the pinmux configurations defined in the arch tree
arm, da850: Add pinmux configurations to the arch tree
arm, da850evm: Do pinmux configuration for EMAC together with other pinmuxes
arm, hawkboard: Remove obsolete struct pinmux_config i2c_pins
arm, davinci: Move pinmux functions from board to arch tree
arm, arm926ejs: always do cpu critical inits
omap_gpmc: use SOFTECC in SPL if it's enabled
nand_spl_simple: add support for software ECC
AM3517: move AM3517 specific mux defines to generic header
AM35xx: add EMAC support
davinci_emac: hardcode 100Mbps for AM35xx and RMII
davinci_emac: fix for running with dcache enabled
arm926ejs: add noop implementation for dcache ops
davinci_emac: conditionally compile specific PHY support
davinci_emac: use internal addresses in buffer descriptors
davinci_emac: move arch-independent defines to separate header
BeagleBoard: config: Really switch to ttyO2
ARM: davinci_dm6467Tevm: Fix build breakage
ARM: OMAP: Remove STACKSIZE for IRQ and FIQ if unused
ARM: OMAP3: Remove unused define SDRC_R_C_B
ARM: OMAP3: Remove unused define CONFIG_OMAP3430
omap4: fix IO setting
omap4+: streamline CONFIG_SYS_TEXT_BASE and other SDRAM addresses
omap4460: add ES1.1 identification
omap4: emif: fix error in driver
omap: remove I2C from SPL
omap4460: fix TPS initialization
omap: fix cache line size for omap3/omap4 boards
omap4: ttyO2 instead of ttyS2 in default bootargs
omap: Improve PLL parameter calculation tool
start.S: remove omap3 specific code from start.S
armv7: setup vector
armv7: include armv7/cpu.c in SPL build
armv7: disable L2 cache in cleanup_before_linux()
arm, arm926ejs: Fix clear bss loop for zero length bss
PXA: Move colibri_pxa270 to board/toradex/
PXA: Flip colibri_pxa27x to pxa-common.h
PXA: Introduce common configuration header for PXA
PXA: Rename pxa_dram_init to pxa2xx_dram_init
PXA: Squash extern pxa_dram_init()
PXA: Export cpu_is_ and pxa_dram_init functions
PXA: Cleanup Colibri PXA270
PXA: Replace timer driver
PXA: Add cpuinfo display for PXA2xx
PXA: Separate PXA2xx CPU init
PXA: Rename CONFIG_PXA2[57]X to CONFIG_CPU_PXA2[57]X
PXA: Unify vpac270 environment size
PXA: Enable command line editing for vpac270
PXA: Adapt Voipac PXA270 to OneNAND SPL
PXA: Drop Voipac PXA270 OneNAND IPL
PXA: Fixup PXA25x boards after start.S update
PXA: Re-add the Dcache locking as RAM for pxa250
PXA: Rework start.S to be closer to other ARMs
PXA: Drop XM250 board
PXA: Drop PLEB2 board
PXA: Drop CRADLE board
PXA: Drop CERF250 board
Fix regression in SMDK6400
nand: Add common functions to linux/mtd/nand.h
Ethernut 5 board support
net: Armada100: Fix compilation warnings
ARM: remove duplicated code for LaCie boards
ARM: add support for LaCie 2Big Network v2
mvsata: fix ide_preinit for missing disks
netspace_v2: Read Ethernet MAC address from EEPROM
omap3evm: Add support for EFI partitions
part_efi: Fix compile errors
Diffstat (limited to 'include')
66 files changed, 1265 insertions, 1508 deletions
diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h index 8842a183f8..0a0c261bf9 100644 --- a/include/configs/am3517_crane.h +++ b/include/configs/am3517_crane.h @@ -64,7 +64,6 @@ /* * DDR related */ -#define CONFIG_OMAP3_MICRON_DDR 1 /* Micron DDR */ #define CONFIG_SYS_CS0_SIZE (256 * 1024 * 1024) /* @@ -264,22 +263,14 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */ -#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */ -#endif /*----------------------------------------------------------------------- * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 -/* SDRAM Bank Allocation method */ -#define SDRC_R_B_C 1 - /*----------------------------------------------------------------------- * FLASH and environment organization */ @@ -330,4 +321,59 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ CONFIG_SYS_INIT_RAM_SIZE - \ GENERATED_GBL_DATA_SIZE) + +/* Defines for SPL */ +#define CONFIG_SPL +#define CONFIG_SPL_NAND_SIMPLE +#define CONFIG_SPL_TEXT_BASE 0x40200800 +#define CONFIG_SPL_MAX_SIZE (45 * 1024) +#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK + +#define CONFIG_SPL_BSS_START_ADDR 0x80000000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ + +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ +#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 +#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" + +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBDISK_SUPPORT +#define CONFIG_SPL_I2C_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SPL_FAT_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_POWER_SUPPORT +#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" + +/* NAND boot config */ +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_PAGE_COUNT 64 +#define CONFIG_SYS_NAND_PAGE_SIZE 2048 +#define CONFIG_SYS_NAND_OOBSIZE 64 +#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) +#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS +#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\ + 10, 11, 12, 13} +#define CONFIG_SYS_NAND_ECCSIZE 512 +#define CONFIG_SYS_NAND_ECCBYTES 3 +#define CONFIG_SYS_NAND_ECCSTEPS (CONFIG_SYS_NAND_PAGE_SIZE / \ + CONFIG_SYS_NAND_ECCSIZE) +#define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * \ + CONFIG_SYS_NAND_ECCSTEPS) +#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 + +/* + * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM + * 64 bytes before this address should be set aside for u-boot.img's + * header. That is 0x800FFFC0--0x80100000 should not be used for any + * other needs. + */ +#define CONFIG_SYS_TEXT_BASE 0x80100000 +#define CONFIG_SYS_SPL_MALLOC_START 0x80208000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 + #endif /* __CONFIG_H */ diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h index 1c70b9df69..d44eeec5b6 100644 --- a/include/configs/am3517_evm.h +++ b/include/configs/am3517_evm.h @@ -63,7 +63,6 @@ /* * DDR related */ -#define CONFIG_OMAP3_MICRON_DDR 1 /* Micron DDR */ #define CONFIG_SYS_CS0_SIZE (256 * 1024 * 1024) /* @@ -263,22 +262,14 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */ -#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */ -#endif /*----------------------------------------------------------------------- * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 -/* SDRAM Bank Allocation method */ -#define SDRC_R_B_C 1 - /*----------------------------------------------------------------------- * FLASH and environment organization */ @@ -331,4 +322,59 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ CONFIG_SYS_INIT_RAM_SIZE - \ GENERATED_GBL_DATA_SIZE) + +/* Defines for SPL */ +#define CONFIG_SPL +#define CONFIG_SPL_NAND_SIMPLE +#define CONFIG_SPL_TEXT_BASE 0x40200800 +#define CONFIG_SPL_MAX_SIZE (45 * 1024) +#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK + +#define CONFIG_SPL_BSS_START_ADDR 0x80000000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ + +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ +#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 +#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" + +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBDISK_SUPPORT +#define CONFIG_SPL_I2C_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SPL_FAT_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_POWER_SUPPORT +#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" + +/* NAND boot config */ +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_PAGE_COUNT 64 +#define CONFIG_SYS_NAND_PAGE_SIZE 2048 +#define CONFIG_SYS_NAND_OOBSIZE 64 +#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) +#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS +#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\ + 10, 11, 12, 13} +#define CONFIG_SYS_NAND_ECCSIZE 512 +#define CONFIG_SYS_NAND_ECCBYTES 3 +#define CONFIG_SYS_NAND_ECCSTEPS (CONFIG_SYS_NAND_PAGE_SIZE / \ + CONFIG_SYS_NAND_ECCSIZE) +#define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * \ + CONFIG_SYS_NAND_ECCSTEPS) +#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 + +/* + * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM + * 64 bytes before this address should be set aside for u-boot.img's + * header. That is 0x800FFFC0--0x80100000 should not be used for any + * other needs. + */ +#define CONFIG_SYS_TEXT_BASE 0x80100000 +#define CONFIG_SYS_SPL_MALLOC_START 0x80208000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 + #endif /* __CONFIG_H */ diff --git a/include/configs/apollon.h b/include/configs/apollon.h index 46595d911a..7fcf437c6d 100644 --- a/include/configs/apollon.h +++ b/include/configs/apollon.h @@ -211,10 +211,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE SZ_128K /* regular stack */ -#ifdef CONFIG_USE_IRQ -# define CONFIG_STACKSIZE_IRQ SZ_4K /* IRQ stack */ -# define CONFIG_STACKSIZE_FIQ SZ_4K /* FIQ stack */ -#endif /*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/balloon3.h b/include/configs/balloon3.h index b604b52023..a5ec224969 100644 --- a/include/configs/balloon3.h +++ b/include/configs/balloon3.h @@ -25,7 +25,7 @@ /* * High Level Board Configuration Options */ -#define CONFIG_PXA27X 1 /* Marvell PXA270 CPU */ +#define CONFIG_CPU_PXA27X 1 /* Marvell PXA270 CPU */ #define CONFIG_BALLOON3 1 /* Balloon3 board */ /* diff --git a/include/configs/cerf250.h b/include/configs/cerf250.h deleted file mode 100644 index 70427daca2..0000000000 --- a/include/configs/cerf250.h +++ /dev/null @@ -1,229 +0,0 @@ -/* - * (C) Copyright 2002 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * Configuation settings for the CERF250 board. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_PXA250 1 /* This is an PXA250 CPU */ -#define CONFIG_CERF250 1 /* on Cerf PXA Board */ -#define CONFIG_BOARD_LATE_INIT -#define CONFIG_BAUDRATE 38400 -#define CONFIG_SYS_TEXT_BASE 0x0 - -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ - -/* we will never enable dcache, because we have to setup MMU first */ -#define CONFIG_SYS_DCACHE_OFF - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -/* - * Hardware drivers - */ -#define CONFIG_SMC91111 -#define CONFIG_SMC91111_BASE 0x04000300 -#define CONFIG_SMC_USE_32_BIT - -/* - * select serial console configuration - */ -#define CONFIG_PXA_SERIAL -#define CONFIG_FFUART 1 /* we use FFUART on CERF PXA */ - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_ETHADDR 00:D0:CA:F1:3C:D2 -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_IPADDR 192.168.0.5 -#define CONFIG_SERVERIP 192.168.0.2 -#define CONFIG_BOOTCOMMAND "bootm 0xC0000" -#define CONFIG_BOOTARGS "root=/dev/mtdblock3 rootfstype=jffs2 console=ttyS0,38400" -#define CONFIG_CMDLINE_TAG - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_HUSH_PARSER 1 -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#ifdef CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT "uboot$ " /* Monitor Command Prompt */ -#else -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#endif -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) - /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_DEVICE_NULLDEV 1 - -#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0xa2000000 /* default load address */ - -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_CPUSPEED 0x141 /* set core clock to 400/200/100 MHz */ - -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - - -/* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/* - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ - -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ -#define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */ -#define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */ -#define PHYS_FLASH_BANK_SIZE 0x02000000 /* 32 MB Banks */ -#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors (x2) */ - -#define CONFIG_SYS_DRAM_BASE 0xa0000000 -#define CONFIG_SYS_DRAM_SIZE 0x04000000 - -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1) - -/* - * GPIO settings - */ - - -#define CONFIG_SYS_GPSR0_VAL 0x00408030 -#define CONFIG_SYS_GPSR1_VAL 0x00BFA882 -#define CONFIG_SYS_GPSR2_VAL 0x0001C000 -#define CONFIG_SYS_GPCR0_VAL 0xC0031100 -#define CONFIG_SYS_GPCR1_VAL 0xFC400300 -#define CONFIG_SYS_GPCR2_VAL 0x00003FFF -#define CONFIG_SYS_GPDR0_VAL 0xC0439330 -#define CONFIG_SYS_GPDR1_VAL 0xFCFFAB82 -#define CONFIG_SYS_GPDR2_VAL 0x0001FFFF -#define CONFIG_SYS_GAFR0_L_VAL 0x80000000 -#define CONFIG_SYS_GAFR0_U_VAL 0xA5000010 -#define CONFIG_SYS_GAFR1_L_VAL 0x60008018 -#define CONFIG_SYS_GAFR1_U_VAL 0xAAA5AAAA -#define CONFIG_SYS_GAFR2_L_VAL 0xAAA0000A -#define CONFIG_SYS_GAFR2_U_VAL 0x00000002 - -#define CONFIG_SYS_PSSR_VAL 0x20 - -#define CONFIG_SYS_CCCR CCCR_L27|CCCR_M2|CCCR_N10 -#define CONFIG_SYS_CKEN 0x0 - -/* - * Memory settings - */ -#define CONFIG_SYS_MSC0_VAL 0x12447FF0 -#define CONFIG_SYS_MSC1_VAL 0x12BC5554 -#define CONFIG_SYS_MSC2_VAL 0x7FF97FF1 -#define CONFIG_SYS_MDCNFG_VAL 0x00001AC9 -#define CONFIG_SYS_MDREFR_VAL 0x03CDC017 -#define CONFIG_SYS_MDMRS_VAL 0x00000000 -#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 -#define CONFIG_SYS_SXCNFG_VAL 0x00000000 - -/* - * PCMCIA and CF Interfaces - */ -#define CONFIG_SYS_MECR_VAL 0x00000000 -#define CONFIG_SYS_MCMEM0_VAL 0x00010504 -#define CONFIG_SYS_MCMEM1_VAL 0x00010504 -#define CONFIG_SYS_MCATT0_VAL 0x00010504 -#define CONFIG_SYS_MCATT1_VAL 0x00010504 -#define CONFIG_SYS_MCIO0_VAL 0x00004715 -#define CONFIG_SYS_MCIO1_VAL 0x00004715 - -#define _LED 0x08000010 /*check this */ -#define LED_BLANK 0x08000040 -#define LED_GPIO 0x10 - -/* - * FLASH and environment organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (25*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (25*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -#define CONFIG_SYS_MONITOR_LEN 0x40000 /* 256 KiB */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + CONFIG_SYS_MONITOR_LEN) -#define CONFIG_ENV_SIZE 0x40000 /* Total Size of Environment Sector */ - - -#endif /* __CONFIG_H */ diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index 026d22203c..a06a89d414 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -38,7 +38,6 @@ */ #define CONFIG_OMAP 1 /* in a TI OMAP core */ #define CONFIG_OMAP34XX 1 /* which is a 34XX */ -#define CONFIG_OMAP3430 1 /* which is in a 3430 */ #define CONFIG_CM_T3X 1 /* working with CM-T35 and CM-T3730 */ #define CONFIG_SYS_TEXT_BASE 0x80008000 @@ -284,10 +283,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */ -#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */ -#endif /*----------------------------------------------------------------------- * Physical Memory Map @@ -296,9 +291,6 @@ #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 #define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ -/* SDRAM Bank Allocation method */ -#define SDRC_R_B_C 1 - /*----------------------------------------------------------------------- * FLASH and environment organization */ diff --git a/include/configs/colibri_pxa270.h b/include/configs/colibri_pxa270.h index 8a3446efd1..7691fb3155 100644 --- a/include/configs/colibri_pxa270.h +++ b/include/configs/colibri_pxa270.h @@ -25,21 +25,15 @@ /* * High Level Board Configuration Options */ -#define CONFIG_PXA27X 1 /* Marvell PXA270 CPU */ -#define CONFIG_VPAC270 1 /* Toradex Colibri PXA270 board */ - -#undef CONFIG_BOARD_LATE_INIT -#undef CONFIG_USE_IRQ -#undef CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_CPU_PXA27X 1 /* Marvell PXA270 CPU */ +#define CONFIG_SYS_TEXT_BASE 0x0 /* * Environment settings */ -#define CONFIG_ENV_SIZE 0x4000 -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_TEXT_BASE 0x0 -#define CONFIG_ENV_OVERWRITE /* override default environment */ - +#define CONFIG_ENV_OVERWRITE +#define CONFIG_SYS_MALLOC_LEN (128 * 1024) +#define CONFIG_ARCH_CPU_INIT #define CONFIG_BOOTCOMMAND \ "if mmc init && fatload mmc 0 0xa0000000 uImage; then " \ "bootm 0xa0000000; " \ @@ -53,8 +47,8 @@ #define CONFIG_BOOTDELAY 2 /* Autoboot delay */ #define CONFIG_CMDLINE_TAG #define CONFIG_SETUP_MEMORY_TAGS - #define CONFIG_LZMA /* LZMA compression support */ +#define CONFIG_OF_LIBFDT /* * Serial Console Configuration @@ -97,58 +91,42 @@ #endif /* - * MMC Card Configuration - */ -#ifdef CONFIG_CMD_MMC -#define CONFIG_MMC -#define CONFIG_PXA_MMC -#define CONFIG_SYS_MMC_BASE 0xF0000000 -#define CONFIG_CMD_FAT -#define CONFIG_DOS_PARTITION -#endif - -/* - * KGDB - */ -#ifdef CONFIG_CMD_KGDB -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ -#endif - -/* * HUSH Shell Configuration */ #define CONFIG_SYS_HUSH_PARSER 1 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_LONGHELP #ifdef CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT "$ " /* Monitor Command Prompt */ +#define CONFIG_SYS_PROMPT "$ " #else -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#define CONFIG_SYS_PROMPT "=> " #endif -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_PBSIZE \ + (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE #define CONFIG_SYS_DEVICE_NULLDEV 1 +#define CONFIG_CMDLINE_EDITING 1 +#define CONFIG_AUTO_COMPLETE 1 + /* * Clock Configuration */ -#undef CONFIG_SYS_CLKS_IN_HZ -#define CONFIG_SYS_HZ 3250000 /* Timer @ 3250000 Hz */ -#define CONFIG_SYS_CPUSPEED 0x290 /* 520 MHz */ +#define CONFIG_SYS_HZ 1000 /* Timer @ 3250000 Hz */ +#define CONFIG_SYS_CPUSPEED 0x290 /* 520MHz */ /* * Stack sizes * * The stack sizes are set up in start.S using the settings below */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ #ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#define CONFIG_STACKSIZE_IRQ (4 * 1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4 * 1024) /* FIQ stack */ #endif /* @@ -164,10 +142,9 @@ #define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ -#define CONFIG_SYS_LOAD_ADDR (0xa1000000) - +#define CONFIG_SYS_LOAD_ADDR PHYS_SDRAM_1 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1) +#define CONFIG_SYS_INIT_SP_ADDR 0x5c010000 /* * NOR FLASH @@ -182,8 +159,8 @@ #define CONFIG_SYS_MAX_FLASH_SECT (4 + 255) #define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_FLASH_ERASE_TOUT (25*CONFIG_SYS_HZ) -#define CONFIG_SYS_FLASH_WRITE_TOUT (25*CONFIG_SYS_HZ) +#define CONFIG_SYS_FLASH_ERASE_TOUT (25 * CONFIG_SYS_HZ) +#define CONFIG_SYS_FLASH_WRITE_TOUT (25 * CONFIG_SYS_HZ) #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 #define CONFIG_SYS_FLASH_PROTECTION 1 @@ -195,14 +172,15 @@ #define CONFIG_SYS_ENV_IS_NOWHERE #endif -#define CONFIG_SYS_MONITOR_BASE 0x000000 -#define CONFIG_SYS_MONITOR_LEN 0x40000 - -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_LEN) -#define CONFIG_ENV_SECT_SIZE 0x40000 -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) +#define CONFIG_SYS_MONITOR_BASE 0x0 +#define CONFIG_SYS_MONITOR_LEN 0x80000 +#define CONFIG_ENV_ADDR \ + (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) +#define CONFIG_ENV_SIZE 0x40000 +#define CONFIG_ENV_SECT_SIZE 0x40000 +#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) /* * GPIO settings @@ -262,17 +240,6 @@ #define CONFIG_SYS_MCIO0_VAL 0x0001430f #define CONFIG_SYS_MCIO1_VAL 0x0001430f -/* - * USB - */ -#ifdef CONFIG_CMD_USB -#define CONFIG_USB_OHCI_NEW -#define CONFIG_SYS_USB_OHCI_CPU_INIT -#define CONFIG_SYS_USB_OHCI_BOARD_INIT -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 -#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x4C000000 -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "tdex270" -#define CONFIG_USB_STORAGE -#endif +#include "pxa-common.h" #endif /* __CONFIG_H */ diff --git a/include/configs/cradle.h b/include/configs/cradle.h deleted file mode 100644 index 25be616651..0000000000 --- a/include/configs/cradle.h +++ /dev/null @@ -1,358 +0,0 @@ -/* - * (C) Copyright 2002 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_PXA250 1 /* This is an PXA250 CPU */ -#define CONFIG_HHP_CRADLE 1 /* on an Cradle Board */ - -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ - -/* we will never enable dcache, because we have to setup MMU first */ -#define CONFIG_SYS_DCACHE_OFF -#define CONFIG_SYS_TEXT_BASE 0x0 -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -/* - * Hardware drivers - */ -#define CONFIG_SMC91111 -#define CONFIG_SMC91111_BASE 0x10000300 -#define CONFIG_SMC91111_EXT_PHY -#define CONFIG_SMC_USE_32_BIT - -/* - * select serial console configuration - */ -#define CONFIG_PXA_SERIAL -#define CONFIG_FFUART 1 /* we use FFUART on LUBBOCK */ - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BAUDRATE 115200 - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOTARGS "root=/dev/mtdblock2 console=ttyS0,115200" -#define CONFIG_ETHADDR 08:00:3e:26:0a:5b -#define CONFIG_NETMASK 255.255.0.0 -#define CONFIG_IPADDR 192.168.0.21 -#define CONFIG_SERVERIP 192.168.0.250 -#define CONFIG_BOOTCOMMAND "bootm 40000" -#define CONFIG_CMDLINE_TAG - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0xa2000000 /* default load address */ - -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_CPUSPEED 0x141 /* set core clock to 200/200/100 MHz */ - - /* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -/* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/* - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x01000000 /* 64 MB */ - -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ -#define PHYS_FLASH_2 0x04000000 /* Flash Bank #1 */ -#define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */ - -#define CONFIG_SYS_DRAM_BASE 0xa0000000 -#define CONFIG_SYS_DRAM_SIZE 0x04000000 - -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1) - -/* - * FLASH and environment organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 32 /* max number of sectors on one chip */ - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR 0x00020000 /* absolute address for now */ -#define CONFIG_ENV_SIZE 0x20000 /* 8K ouch, this may later be */ - -/****************************************************************************** - * - * CPU specific defines - * - ******************************************************************************/ - -/* - * GPIO settings - * - * GPIO pin assignments - * GPIO Name Dir Out AF - * 0 NC - * 1 NC - * 2 SIRQ1 I - * 3 SIRQ2 I - * 4 SIRQ3 I - * 5 DMAACK1 O 0 - * 6 DMAACK2 O 0 - * 7 DMAACK3 O 0 - * 8 TC1 O 0 - * 9 TC2 O 0 - * 10 TC3 O 0 - * 11 nDMAEN O 1 - * 12 AENCTRL O 0 - * 13 PLDTC O 0 - * 14 ETHIRQ I - * 15 NC - * 16 NC - * 17 NC - * 18 RDY I - * 19 DMASIO I - * 20 ETHIRQ NC - * 21 NC - * 22 PGMEN O 1 FIXME for debug only enable flash - * 23 NC - * 24 NC - * 25 NC - * 26 NC - * 27 NC - * 28 NC - * 29 NC - * 30 NC - * 31 NC - * 32 NC - * 33 NC - * 34 FFRXD I 01 - * 35 FFCTS I 01 - * 36 FFDCD I 01 - * 37 FFDSR I 01 - * 38 FFRI I 01 - * 39 FFTXD O 1 10 - * 40 FFDTR O 0 10 - * 41 FFRTS O 0 10 - * 42 RS232FOFF O 0 00 - * 43 NC - * 44 NC - * 45 IRSL0 O 0 - * 46 IRRX0 I 01 - * 47 IRTX0 O 0 10 - * 48 NC - * 49 nIOWE O 0 - * 50 NC - * 51 NC - * 52 NC - * 53 NC - * 54 NC - * 55 NC - * 56 NC - * 57 NC - * 58 DKDIRQ I - * 59 NC - * 60 NC - * 61 NC - * 62 NC - * 63 NC - * 64 COMLED O 0 - * 65 COMLED O 0 - * 66 COMLED O 0 - * 67 COMLED O 0 - * 68 COMLED O 0 - * 69 COMLED O 0 - * 70 COMLED O 0 - * 71 COMLED O 0 - * 72 NC - * 73 NC - * 74 NC - * 75 NC - * 76 NC - * 77 NC - * 78 CSIO O 1 - * 79 NC - * 80 CSETH O 1 - * - * NOTE: All NC's are defined to be outputs - * - */ -/* Pin direction control */ -/* NOTE GPIO 0, 61, 62 are set for inputs due to CPLD SPAREs */ -#define CONFIG_SYS_GPDR0_VAL 0xfff3bf02 -#define CONFIG_SYS_GPDR1_VAL 0xfbffbf83 -#define CONFIG_SYS_GPDR2_VAL 0x0001ffff -/* Set and Clear registers */ -#define CONFIG_SYS_GPSR0_VAL 0x00400800 -#define CONFIG_SYS_GPSR1_VAL 0x00000480 -#define CONFIG_SYS_GPSR2_VAL 0x00014000 -#define CONFIG_SYS_GPCR0_VAL 0x00000000 -#define CONFIG_SYS_GPCR1_VAL 0x00000000 -#define CONFIG_SYS_GPCR2_VAL 0x00000000 -/* Edge detect registers (these are set by the kernel) */ -#define CONFIG_SYS_GRER0_VAL 0x00000000 -#define CONFIG_SYS_GRER1_VAL 0x00000000 -#define CONFIG_SYS_GRER2_VAL 0x00000000 -#define CONFIG_SYS_GFER0_VAL 0x00000000 -#define CONFIG_SYS_GFER1_VAL 0x00000000 -#define CONFIG_SYS_GFER2_VAL 0x00000000 -/* Alternate function registers */ -#define CONFIG_SYS_GAFR0_L_VAL 0x00000000 -#define CONFIG_SYS_GAFR0_U_VAL 0x00000010 -#define CONFIG_SYS_GAFR1_L_VAL 0x900a9550 -#define CONFIG_SYS_GAFR1_U_VAL 0x00000008 -#define CONFIG_SYS_GAFR2_L_VAL 0x20000000 -#define CONFIG_SYS_GAFR2_U_VAL 0x00000002 - -/* - * Clocks, power control and interrupts - */ -#define CONFIG_SYS_PSSR_VAL 0x00000020 -#define CONFIG_SYS_CCCR 0x00000141 /* 100 MHz memory, 200 MHz CPU */ -#define CONFIG_SYS_CKEN 0x00000060 /* FFUART and STUART enabled */ -#define CONFIG_SYS_ICMR 0x00000000 /* No interrupts enabled */ - -/* FIXME - * - * RTC settings - * Watchdog - * - */ - -/* - * Memory settings - * - * FIXME Can ethernet be burst read and/or write?? This is set for lubbock - * Verify timings on all - */ -#define CONFIG_SYS_MSC0_VAL 0x000023FA /* flash bank (cs0) */ -/*#define CONFIG_SYS_MSC1_VAL 0x00003549 / * SuperIO bank (cs2) */ -#define CONFIG_SYS_MSC1_VAL 0x0000354c /* SuperIO bank (cs2) */ -#define CONFIG_SYS_MSC2_VAL 0x00001224 /* Ethernet bank (cs4) */ -#ifdef REDBOOT_WAY -#define CONFIG_SYS_MDCNFG_VAL 0x00001aa1 /* FIXME can DTC be 01? */ -#define CONFIG_SYS_MDMRS_VAL 0x00000000 -#define CONFIG_SYS_MDREFR_VAL 0x00018018 -#else -#define CONFIG_SYS_MDCNFG_VAL 0x00001aa1 /* FIXME can DTC be 01? */ -#define CONFIG_SYS_MDMRS_VAL 0x00000000 -#define CONFIG_SYS_MDREFR_VAL 0x00403018 /* Initial setting, individual bits set in lowlevel_init.S */ -#endif -#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 -#define CONFIG_SYS_SXCNFG_VAL 0x00000000 - -/* - * PCMCIA and CF Interfaces (NOT USED, these values from lubbock init) - */ -#define CONFIG_SYS_MECR_VAL 0x00000000 -#define CONFIG_SYS_MCMEM0_VAL 0x00010504 -#define CONFIG_SYS_MCMEM1_VAL 0x00010504 -#define CONFIG_SYS_MCATT0_VAL 0x00010504 -#define CONFIG_SYS_MCATT1_VAL 0x00010504 -#define CONFIG_SYS_MCIO0_VAL 0x00004715 -#define CONFIG_SYS_MCIO1_VAL 0x00004715 - -/* Board specific defines */ - -/* LED defines */ -#define YELLOW 0x03 -#define RED 0x02 -#define GREEN 0x01 -#define OFF 0x00 -#define LED_IRDA0 0 -#define LED_IRDA1 2 -#define LED_IRDA2 4 -#define LED_IRDA3 6 - -/* SuperIO defines */ -#define CRADLE_SIO_INDEX 0x2e -#define CRADLE_SIO_DATA 0x2f - -/* IO defines */ -#define CRADLE_CPLD_PHYS 0x08000000 -#define CRADLE_SIO1_PHYS 0x08100000 -#define CRADLE_SIO2_PHYS 0x08200000 -#define CRADLE_SIO3_PHYS 0x08300000 -#define CRADLE_ETH_PHYS 0x10000000 - -#ifndef __ASSEMBLY__ - -/* global prototypes */ -void led_code(int code, int color); - -#endif - -#endif /* __CONFIG_H */ diff --git a/include/configs/da850_am18xxevm.h b/include/configs/da850_am18xxevm.h index 92b83ff8d0..9b7bf1e792 100644 --- a/include/configs/da850_am18xxevm.h +++ b/include/configs/da850_am18xxevm.h @@ -36,6 +36,7 @@ #define CONFIG_MACH_DAVINCI_DA850_EVM #define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ +#define CONFIG_SOC_DA850 /* TI DA850 SoC */ #define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) #define CONFIG_SYS_OSCIN_FREQ 24000000 #define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE @@ -43,7 +44,7 @@ #define CONFIG_SYS_HZ 1000 #define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_SYS_TEXT_BASE 0xc1080000 - +#define CONFIG_DA850_AM18X_EVM /* * Memory Info */ diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index 4c143700dd..2e2aa19a45 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -36,6 +36,7 @@ #define CONFIG_MACH_DAVINCI_DA850_EVM #define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ +#define CONFIG_SOC_DA850 /* TI DA850 SoC */ #define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) #define CONFIG_SYS_OSCIN_FREQ 24000000 #define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE diff --git a/include/configs/davinci_dm6467Tevm.h b/include/configs/davinci_dm6467Tevm.h index f7c994eba9..b3a4e44344 100644 --- a/include/configs/davinci_dm6467Tevm.h +++ b/include/configs/davinci_dm6467Tevm.h @@ -23,6 +23,7 @@ /* Spectrum Digital TMS320DM6467T EVM board */ #define DAVINCI_DM6467EVM #define DAVINCI_DM6467TEVM +#define CONFIG_DISPLAY_CPUINFO #define CONFIG_SYS_USE_NAND #define CONFIG_SYS_NAND_SMALLPAGE diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index e1743dc5ee..758326bb9d 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -34,10 +34,15 @@ /* High Level Configuration Options */ #define CONFIG_OMAP 1 /* in a TI OMAP core */ #define CONFIG_OMAP34XX 1 /* which is a 34XX */ -#define CONFIG_OMAP3430 1 /* which is in a 3430 */ #define CONFIG_OMAP3_DEVKIT8000 1 /* working with DevKit8000 */ -#define CONFIG_SYS_TEXT_BASE 0x80008000 +/* + * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM + * 64 bytes before this address should be set aside for u-boot.img's + * header. That is 0x800FFFC0--0x80100000 should not be used for any + * other needs. + */ +#define CONFIG_SYS_TEXT_BASE 0x80100000 #define CONFIG_SDRC /* The chip has SDRC controller */ @@ -68,10 +73,6 @@ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) /* Hardware drivers */ - -/* DDR - I use Micron DDR */ -#define CONFIG_OMAP3_MICRON_DDR 1 - /* DM9000 */ #define CONFIG_NET_RETRY_COUNT 20 #define CONFIG_DRIVER_DM9000 1 @@ -276,20 +277,12 @@ /* The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */ -#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */ -#endif /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_1_SIZE (128 << 20) /* at least 128 MiB */ #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 -/* SDRAM Bank Allocation method */ -#define SDRC_R_B_C 1 - /* NAND and environment organization */ #define PISMO1_NAND_SIZE GPMC_SIZE_128M @@ -317,6 +310,7 @@ #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_LIBDISK_SUPPORT +#define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_I2C_SUPPORT #define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT @@ -359,7 +353,7 @@ #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 #define CONFIG_SYS_NAND_U_BOOT_SIZE 0x200000 -#define CONFIG_SYS_SPL_MALLOC_START 0x80108000 +#define CONFIG_SYS_SPL_MALLOC_START 0x80208000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */ #endif /* __CONFIG_H */ diff --git a/include/configs/dig297.h b/include/configs/dig297.h index 9baf41582b..42aab27fac 100644 --- a/include/configs/dig297.h +++ b/include/configs/dig297.h @@ -45,7 +45,6 @@ */ #define CONFIG_OMAP /* in a TI OMAP core */ #define CONFIG_OMAP34XX /* which is a 34XX */ -#define CONFIG_OMAP3430 /* which is in a 3430 */ #define CONFIG_SYS_TEXT_BASE 0x80008000 @@ -282,9 +281,6 @@ #define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 -/* SDRAM Bank Allocation method */ -#define SDRC_R_B_C 1 - /*----------------------------------------------------------------------- * FLASH and environment organization */ diff --git a/include/configs/efikamx.h b/include/configs/efikamx.h index a07c8b58e3..2b069d6b7a 100644 --- a/include/configs/efikamx.h +++ b/include/configs/efikamx.h @@ -85,7 +85,7 @@ * Hardware drivers */ #define CONFIG_MXC_UART -#define CONFIG_SYS_MX51_UART1 +#define CONFIG_MXC_UART_BASE UART1_BASE #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} diff --git a/include/configs/enbw_cmc.h b/include/configs/enbw_cmc.h new file mode 100644 index 0000000000..c427dc7c69 --- /dev/null +++ b/include/configs/enbw_cmc.h @@ -0,0 +1,451 @@ +/* + * (C) Copyright 2011 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * Based on: + * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ + * + * Based on davinci_dvevm.h. Original Copyrights follow: + * + * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * Board + */ +#define CONFIG_DRIVER_TI_EMAC +#define CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT 7 +#define CONFIG_USE_NAND + +/* + * SoC Configuration + */ +#define CONFIG_ARM926EJS /* arm926ejs CPU core */ +#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ +#define CONFIG_SOC_DA850 /* TI DA850 SoC */ +#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) +#define CONFIG_SYS_OSCIN_FREQ 24000000 +#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE +#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) +#define CONFIG_SYS_HZ 1000 +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_DA850_LOWLEVEL +#define CONFIG_ARCH_CPU_INIT +#define CONFIG_DA8XX_GPIO +#define CONFIG_HOSTNAME enbw_cmc +#define CONFIG_DISPLAY_CPUINFO + +#define MACH_TYPE_ENBW_CMC 3585 +#define CONFIG_MACH_TYPE MACH_TYPE_ENBW_CMC + +/* + * Memory Info + */ +#define CONFIG_SYS_MALLOC_LEN (0x10000 + 1*1024*1024) /* malloc() len */ +#define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */ +#define PHYS_SDRAM_1_SIZE (64 << 20) /* SDRAM size 64MB */ +#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/ + +/* memtest start addr */ +#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1 + 0x2000000) + +/* memtest will be run on 16MB */ +#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024) + +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define CONFIG_STACKSIZE (256*1024) /* regular stack */ + +/* + * Serial Driver info + */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size */ +#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART2_BASE /* Base address of UART2 */ +#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) +#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ +#define CONFIG_BAUDRATE 115200 /* Default baud rate */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CONFIG_SYS_DA850_LPSC_UART DAVINCI_LPSC_UART2 +/* + * I2C Configuration + */ +#define CONFIG_HARD_I2C +#define CONFIG_DRIVER_DAVINCI_I2C +#define CONFIG_SYS_I2C_SPEED 80000 +#define CONFIG_SYS_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ +#define CONFIG_SYS_I2C_EXPANDER_ADDR 0x20 +#define CONFIG_CMD_I2C + +#define CONFIG_CMD_DTT +#define CONFIG_DTT_LM75 +#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */ +#define CONFIG_SYS_DTT_MAX_TEMP 70 +#define CONFIG_SYS_DTT_LOW_TEMP -30 +#define CONFIG_SYS_DTT_HYSTERESIS 3 + +/* + * Flash & Environment + */ +#ifdef CONFIG_USE_NAND +#define CONFIG_NAND_DAVINCI +#define CONFIG_SYS_NAND_USE_FLASH_BBT +#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST +#define CONFIG_SYS_NAND_PAGE_2K +#define CONFIG_SYS_NAND_CS 3 +#define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE3_BASE +#define CONFIG_SYS_CLE_MASK 0x10 +#define CONFIG_SYS_ALE_MASK 0x8 +#undef CONFIG_SYS_NAND_HW_ECC +#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define NAND_MAX_CHIPS 1 + +#define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=davinci_nand.1" +#define MTDPARTS_DEFAULT \ + "mtdparts=" \ + "physmap-flash.0:" \ + "512k(U-Boot)," \ + "64k(env1)," \ + "64k(env2)," \ + "-(rest);" \ + "davinci_nand.1:" \ + "128k(dtb)," \ + "3m(kernel)," \ + "4m(rootfs)," \ + "-(userfs)" + + +#define CONFIG_CMD_MTDPARTS + +#endif + +/* + * Network & Ethernet Configuration + */ +#ifdef CONFIG_DRIVER_TI_EMAC +#define CONFIG_MII +#define CONFIG_BOOTP_DEFAULT +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_NET_RETRY_COUNT 10 +#define CONFIG_NET_MULTI +#endif + +/* + * Flash configuration + */ +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_FLASH_CFI_MTD +#define CONFIG_SYS_FLASH_BASE 0x60000000 +#define CONFIG_SYS_FLASH_SIZE 0x01000000 +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */ +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } +#define CONFIG_SYS_MAX_FLASH_SECT 128 +#define CONFIG_FLASH_16BIT /* Flash is 16-bit */ + +#define CONFIG_CMD_FLASH + +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_SYS_MONITOR_LEN 0x80000 +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + \ + CONFIG_SYS_MONITOR_LEN) +#define CONFIG_ENV_SECT_SIZE (64 << 10) +#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */ +#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + \ + CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) +#undef CONFIG_ENV_IS_IN_NAND +#define CONFIG_DEFAULT_SETTINGS_ADDR (CONFIG_ENV_ADDR_REDUND + \ + CONFIG_ENV_SECT_SIZE) + +#define xstr(s) str(s) +#define str(s) #s + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "u-boot_addr_r=c0000000\0" \ + "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin\0" \ + "load=tftp ${u-boot_addr_r} ${u-boot}\0" \ + "update=protect off " xstr(CONFIG_SYS_FLASH_BASE) " +${filesize};"\ + "erase " xstr(CONFIG_SYS_FLASH_BASE) " +${filesize};" \ + "cp.b ${u-boot_addr_r} " xstr(CONFIG_SYS_FLASH_BASE) \ + " ${filesize};" \ + "protect on " xstr(CONFIG_SYS_FLASH_BASE) " +${filesize}\0"\ + "netdev=eth0\0" \ + "rootpath=/opt/eldk-arm/arm\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "kernel_addr_r=c0700000\0" \ + "fdt_addr_r=c0600000\0" \ + "ramdisk_addr_r=c0b00000\0" \ + "fdt_file=" xstr(CONFIG_HOSTNAME) "/" \ + xstr(CONFIG_HOSTNAME) ".dtb\0" \ + "kernel_file=" xstr(CONFIG_HOSTNAME) "/uImage \0" \ + "nand_ld_ramdsk=nand read ${ramdisk_addr_r} 320000 400000\0" \ + "nand_ld_kernel=nand read ${kernel_addr_r} 20000 300000\0" \ + "nand_ld_fdt=nand read ${fdt_addr_r} 0 2000\0" \ + "load_kernel=tftp ${kernel_addr_r} ${kernel_file}\0" \ + "load_fdt=tftp ${fdt_addr_r} ${fdt_file}\0" \ + "load_nand=run nand_ld_ramdsk nand_ld_kernel nand_ld_fdt\0" \ + "addcon=setenv bootargs ${bootargs} console=ttyS2," \ + "${baudrate}n8\0" \ + "net_nfs=run load_fdt load_kernel; " \ + "run nfsargs addip addcon addmtd addmisc;" \ + "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ + "nand_selfnand=run load_nand ramargs addip addcon addmisc;bootm "\ + "${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}\0" \ + "bootcmd=run net_nfs\0" \ + "machid=e01\0" \ + "key_cmd_0=echo key: 0\0" \ + "key_cmd_1=echo key: 1\0" \ + "key_cmd_2=echo key: 2\0" \ + "key_cmd_3=echo key: 3\0" \ + "key_magic_0=0\0" \ + "key_magic_1=1\0" \ + "key_magic_2=2\0" \ + "key_magic_3=3\0" \ + "magic_keys=0123\0" \ + "hwconfig=switch:lan=on,pwl=off\0" \ + "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ + "addmisc=setenv bootargs ${bootargs} davinci_mmc.use_dma=0\0" \ + "mtdids=" MTDIDS_DEFAULT "\0" \ + "mtdparts=" MTDPARTS_DEFAULT "\0" \ + "logversion=2\0" \ + "\0" + +/* + * U-Boot general configuration + */ +#define CONFIG_BOOTFILE "uImage" /* Boot file name */ +#define CONFIG_SYS_PROMPT "=> " /* Command Prompt */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */ +#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000) +#define CONFIG_VERSION_VARIABLE +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_CMDLINE_EDITING +#define CONFIG_SYS_LONGHELP +#define CONFIG_CRC32_VERIFY +#define CONFIG_MX_CYCLIC +#define CONFIG_BOOTDELAY 3 +#define CONFIG_HWCONFIG +#define CONFIG_SHOW_BOOT_PROGRESS +#define CONFIG_BOARD_LATE_INIT + +/* + * U-Boot commands + */ +#include <config_cmd_default.h> +#define CONFIG_CMD_ENV +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_CACHE + +#ifndef CONFIG_DRIVER_TI_EMAC +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_DHCP +#undef CONFIG_CMD_MII +#undef CONFIG_CMD_PING +#endif + +#ifdef CONFIG_USE_NAND +#undef CONFIG_CMD_IMLS +#define CONFIG_CMD_NAND + +#define CONFIG_CMD_MTDPARTS +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS +#define CONFIG_LZO +#define CONFIG_RBTREE +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS +#endif + +#if !defined(CONFIG_USE_NAND) && \ + !defined(CONFIG_USE_NOR) && \ + !defined(CONFIG_USE_SPIFLASH) +#define CONFIG_ENV_IS_NOWHERE +#define CONFIG_SYS_NO_FLASH +#define CONFIG_ENV_SIZE (16 << 10) +#undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_ENV +#endif + +#define CONFIG_SYS_TEXT_BASE 0x60000000 +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_SDRAM_BASE 0xc0000000 +#define CONFIG_SYS_INIT_SP_ADDR (0x8001ff00) + +#define CONFIG_VERSION_VARIABLE +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ + "echo" +#define CONFIG_MISC_INIT_R + +#define CONFIG_CMC_RESET_PIN 0x04000000 +#define CONFIG_CMC_RESET_TIMEOUT 3 + +#define CONFIG_HW_WATCHDOG +#define CONFIG_SYS_WDTTIMERBASE DAVINCI_TIMER1_BASE +#define CONFIG_SYS_WDT_PERIOD_LOW 0x0c000000 +#define CONFIG_SYS_WDT_PERIOD_HIGH 0x0 + +#define CONFIG_CMD_DATE +#define CONFIG_RTC_DAVINCI + +/* SD/MMC */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_DAVINCI_MMC +#define CONFIG_MMC_MBLOCK +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_FAT +#define CONFIG_CMD_MMC + + +/* FDT support */ +#define CONFIG_OF_LIBFDT + +/* LowLevel Init */ +/* PLL */ +#define CONFIG_SYS_DV_CLKMODE 0 +#define CONFIG_SYS_DA850_PLL0_POSTDIV 0 +#define CONFIG_SYS_DA850_PLL0_PLLDIV1 0x8000 +#define CONFIG_SYS_DA850_PLL0_PLLDIV2 0x8001 +#define CONFIG_SYS_DA850_PLL0_PLLDIV3 0x8002 /* 150MHz */ +#define CONFIG_SYS_DA850_PLL0_PLLDIV4 0x8003 +#define CONFIG_SYS_DA850_PLL0_PLLDIV5 0x8002 +#define CONFIG_SYS_DA850_PLL0_PLLDIV6 CONFIG_SYS_DA850_PLL0_PLLDIV1 +#define CONFIG_SYS_DA850_PLL0_PLLDIV7 0x8005 + +#define CONFIG_SYS_DA850_PLL1_POSTDIV 1 +#define CONFIG_SYS_DA850_PLL1_PLLDIV1 0x8000 +#define CONFIG_SYS_DA850_PLL1_PLLDIV2 0x8001 +#define CONFIG_SYS_DA850_PLL1_PLLDIV3 0x8002 + +#define CONFIG_SYS_DA850_PLL0_PLLM 18 /* PLL0 -> 456 MHz */ +#define CONFIG_SYS_DA850_PLL1_PLLM 24 /* PLL1 -> 300 MHz */ + +/* DDR RAM */ +#define CONFIG_SYS_DA850_DDR2_DDRPHYCR (DV_DDR_PHY_PWRDNEN | \ + DV_DDR_PHY_EXT_STRBEN | \ + (0x4 << DV_DDR_PHY_RD_LATENCY_SHIFT)) + +#define CONFIG_SYS_DA850_DDR2_SDBCR (0 | \ + (0 << DV_DDR_SDCR_DDR2TERM1_SHIFT) | \ + (0 << DV_DDR_SDCR_MSDRAMEN_SHIFT) | \ + (1 << DV_DDR_SDCR_DDR2EN_SHIFT) | \ + (0x1 << DV_DDR_SDCR_DDREN_SHIFT) | \ + (0x1 << DV_DDR_SDCR_SDRAMEN_SHIFT) | \ + (0x1 << DV_DDR_SDCR_TIMUNLOCK_SHIFT) | \ + (0x1 << DV_DDR_SDCR_BUS_WIDTH_SHIFT) | \ + (0x3 << DV_DDR_SDCR_CL_SHIFT) | \ + (0x2 << DV_DDR_SDCR_IBANK_SHIFT) | \ + (0x2 << DV_DDR_SDCR_PAGESIZE_SHIFT)) + +#define CONFIG_SYS_DA850_DDR2_SDBCR2 4 /* 13 row address bits */ + +/* + * freq = 150MHz -> t = 7ns + */ +#define CONFIG_SYS_DA850_DDR2_SDTIMR (0 | \ + (0x0d << DV_DDR_SDTMR1_RFC_SHIFT) | \ + (1 << DV_DDR_SDTMR1_RP_SHIFT) | \ + (1 << DV_DDR_SDTMR1_RCD_SHIFT) | \ + (1 << DV_DDR_SDTMR1_WR_SHIFT) | \ + (5 << DV_DDR_SDTMR1_RAS_SHIFT) | \ + (7 << DV_DDR_SDTMR1_RC_SHIFT) | \ + (1 << DV_DDR_SDTMR1_RRD_SHIFT) | \ + (readl(&dv_ddr2_regs_ctrl->sdtimr) & 0x4) | /* Reserved */ \ + ((2 - 1) << DV_DDR_SDTMR1_WTR_SHIFT)) + +/* + * freq = 150MHz -> t=7ns + */ +#define CONFIG_SYS_DA850_DDR2_SDTIMR2 (0 | \ + (readl(&dv_ddr2_regs_ctrl->sdtimr2) & 0x80000000) | /* Reserved */ \ + (8 << DV_DDR_SDTMR2_RASMAX_SHIFT) | \ + (2 << DV_DDR_SDTMR2_XP_SHIFT) | \ + (0 << DV_DDR_SDTMR2_ODT_SHIFT) | \ + (15 << DV_DDR_SDTMR2_XSNR_SHIFT) | \ + (27 << DV_DDR_SDTMR2_XSRD_SHIFT) | \ + (0 << DV_DDR_SDTMR2_RTP_SHIFT) | \ + (2 << DV_DDR_SDTMR2_CKE_SHIFT)) + +#define CONFIG_SYS_DA850_DDR2_SDRCR 0x00000407 +#define CONFIG_SYS_DA850_DDR2_PBBPR 0x30 +#define CONFIG_SYS_DA850_SYSCFG_SUSPSRC (DAVINCI_SYSCFG_SUSPSRC_TIMER0 | \ + DAVINCI_SYSCFG_SUSPSRC_SPI1 | \ + DAVINCI_SYSCFG_SUSPSRC_UART2 | \ + DAVINCI_SYSCFG_SUSPSRC_EMAC |\ + DAVINCI_SYSCFG_SUSPSRC_I2C) + +#define CONFIG_SYS_DA850_CS2CFG (DAVINCI_ABCR_WSETUP(2) | \ + DAVINCI_ABCR_WSTROBE(6) | \ + DAVINCI_ABCR_WHOLD(1) | \ + DAVINCI_ABCR_RSETUP(2) | \ + DAVINCI_ABCR_RSTROBE(6) | \ + DAVINCI_ABCR_RHOLD(1) | \ + DAVINCI_ABCR_ASIZE_16BIT) + +#define CONFIG_SYS_DA850_CS3CFG (DAVINCI_ABCR_WSETUP(1) | \ + DAVINCI_ABCR_WSTROBE(2) | \ + DAVINCI_ABCR_WHOLD(1) | \ + DAVINCI_ABCR_RSETUP(1) | \ + DAVINCI_ABCR_RSTROBE(6) | \ + DAVINCI_ABCR_RHOLD(1) | \ + DAVINCI_ABCR_ASIZE_8BIT) + +/* + * NOR Bootconfiguration word: + * Method: Direc boot + * EMIFA access mode: 16 Bit + */ +#define CONFIG_SYS_DV_NOR_BOOT_CFG (0x11) + +#define CONFIG_POST (CONFIG_SYS_POST_MEMORY) +#define CONFIG_SYS_POST_WORD_ADDR 0x8001FFF0 +#define CONFIG_LOGBUFFER +#define CONFIG_SYS_CONSOLE_IS_IN_ENV + +#define CONFIG_BOOTCOUNT_LIMIT +#define CONFIG_SYS_BOOTCOUNT_ADDR DAVINCI_RTC_BASE + +#define CONFIG_SYS_NAND_U_BOOT_DST 0xc0080000 +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x60004000 +#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x70000 +#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST +#endif /* __CONFIG_H */ diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h new file mode 100644 index 0000000000..f878665b29 --- /dev/null +++ b/include/configs/ethernut5.h @@ -0,0 +1,287 @@ +/* + * (C) Copyright 2011 + * egnite GmbH <info@egnite.de> + * + * Configuation settings for Ethernut 5 with AT91SAM9XE. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <asm/hardware.h> + +/* The first stage boot loader expects u-boot running at this address. */ +#define CONFIG_SYS_TEXT_BASE 0x27000000 /* 16MB available */ + +/* The first stage boot loader takes care of low level initialization. */ +#define CONFIG_SKIP_LOWLEVEL_INIT + +/* Set our official architecture number. */ +#define MACH_TYPE_ETHERNUT5 1971 +#define CONFIG_MACH_TYPE MACH_TYPE_ETHERNUT5 + +/* CPU information */ +#define CONFIG_ARM926EJS +#define CONFIG_AT91FAMILY +#define CONFIG_DISPLAY_CPUINFO /* Display at console. */ +#define CONFIG_ARCH_CPU_INIT + +/* ARM asynchronous clock */ +#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ +#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* 18.432 MHz crystal */ +#define CONFIG_SYS_HZ 1000 +#undef CONFIG_USE_IRQ /* Running w/o interrupts */ + +/* 32kB internal SRAM */ +#define CONFIG_SRAM_BASE 0x00300000 /*AT91SAM9XE_SRAM_BASE */ +#define CONFIG_SRAM_SIZE (32 << 10) +#define CONFIG_STACKSIZE (CONFIG_SRAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SRAM_BASE + CONFIG_STACKSIZE) + +/* 128MB SDRAM in 1 bank */ +#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_SYS_SDRAM_BASE 0x20000000 +#define CONFIG_SYS_SDRAM_SIZE (128 << 20) +#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE +#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20)) +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_TEXT_BASE \ + - CONFIG_SYS_MALLOC_LEN) + +/* 512kB on-chip NOR flash */ +# define CONFIG_SYS_MAX_FLASH_BANKS 1 +# define CONFIG_SYS_FLASH_BASE 0x00200000 /* AT91SAM9XE_FLASH_BASE */ +# define CONFIG_AT91_EFLASH +# define CONFIG_SYS_MAX_FLASH_SECT 32 +# define CONFIG_SYS_FLASH_PROTECTION /* First stage loader in sector 0 */ +# define CONFIG_EFLASH_PROTSECTORS 1 + +/* 512kB DataFlash at NPCS0 */ +#define CONFIG_SYS_MAX_DATAFLASH_BANKS 1 +#define CONFIG_HAS_DATAFLASH +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_ATMEL +#define CONFIG_ATMEL_DATAFLASH_SPI +#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 +#define DATAFLASH_TCSS (0x1a << 16) +#define DATAFLASH_TCHS (0x1 << 24) + +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_OFFSET 0x3DE000 +#define CONFIG_ENV_SECT_SIZE (132 << 10) +#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE +#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 \ + + CONFIG_ENV_OFFSET) +#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 \ + + 0x042000) + +/* SPI */ +#define CONFIG_ATMEL_SPI +#define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ) +#define AT91_SPI_CLK 15000000 + +/* Serial port */ +#define CONFIG_ATMEL_USART +#define CONFIG_USART3 /* USART 3 is DBGU */ +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } +#define CONFIG_USART_BASE ATMEL_BASE_DBGU +#define CONFIG_USART_ID ATMEL_ID_SYS + +/* Misc. hardware drivers */ +#define CONFIG_AT91_GPIO + +/* Command line configuration */ +#include <config_cmd_default.h> +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_LOADS + +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MII +#define CONFIG_CMD_MTDPARTS +#define CONFIG_CMD_NAND +#define CONFIG_CMD_SPI + +#ifdef MINIMAL_LOADER +#undef CONFIG_CMD_CONSOLE +#undef CONFIG_CMD_EDITENV +#undef CONFIG_CMD_IMI +#undef CONFIG_CMD_ITEST +#undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_LOADB +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_NFS +#undef CONFIG_CMD_SETGETDCR +#undef CONFIG_CMD_XIMG +#else +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_BSP +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_CDP +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DNS +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MMC +#define CONFIG_CMD_PING +#define CONFIG_CMD_RARP +#define CONFIG_CMD_REISER +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_SETEXPR +#define CONFIG_CMD_SF +#define CONFIG_CMD_SNTP +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS +#define CONFIG_CMD_UNZIP +#define CONFIG_CMD_USB +#endif + +/* NAND flash */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE 0x40000000 +#define CONFIG_SYS_NAND_DBW_8 +#define CONFIG_NAND_ATMEL +/* our ALE is AD21 */ +#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) +/* our CLE is AD22 */ +#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTC, 14 +#endif + +/* JFFS2 */ +#ifdef CONFIG_CMD_JFFS2 +#define CONFIG_MTD_NAND_ECC_JFFS2 +#define CONFIG_JFFS2_CMDLINE +#define CONFIG_JFFS2_NAND +#endif + +/* Ethernet */ +#define CONFIG_NET_MULTI +#define CONFIG_NET_RETRY_COUNT 20 +#define CONFIG_MACB +#define CONFIG_RMII +#define CONFIG_PHY_ID 0 +#define CONFIG_MACB_SEARCH_PHY + +/* MMC */ +#ifdef CONFIG_CMD_MMC +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_GENERIC_ATMEL_MCI +#define CONFIG_SYS_MMC_CD_PIN AT91_PIO_PORTC, 8 +#endif + +/* USB */ +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_ATMEL +#define CONFIG_USB_OHCI_NEW +#define CONFIG_SYS_USB_OHCI_CPU_INIT +#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "host" +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 +#define CONFIG_USB_STORAGE +#endif + +/* RTC */ +#if defined(CONFIG_CMD_DATE) || defined(CONFIG_CMD_SNTP) +#define CONFIG_RTC_PCF8563 +#define CONFIG_SYS_I2C_RTC_ADDR 0x51 +#endif + +/* I2C */ +#define CONFIG_SYS_MAX_I2C_BUS 1 +#define CONFIG_SYS_I2C_SLAVE 0 +#define CONFIG_SYS_I2C_SPEED 100000 + +#define CONFIG_SOFT_I2C +#define I2C_SOFT_DECLARATIONS + +#define GPIO_I2C_SCL AT91_PIO_PORTA, 24 +#define GPIO_I2C_SDA AT91_PIO_PORTA, 23 + +#define I2C_INIT { \ + at91_set_pio_periph(AT91_PIO_PORTA, 23, 0); \ + at91_set_pio_multi_drive(AT91_PIO_PORTA, 23, 1); \ + at91_set_pio_periph(AT91_PIO_PORTA, 24, 0); \ + at91_set_pio_output(AT91_PIO_PORTA, 24, 0); \ + at91_set_pio_multi_drive(AT91_PIO_PORTA, 24, 1); \ +} + +#define I2C_ACTIVE at91_set_pio_output(AT91_PIO_PORTA, 23, 0) +#define I2C_TRISTATE at91_set_pio_input(AT91_PIO_PORTA, 23, 0) +#define I2C_SCL(bit) at91_set_pio_value(AT91_PIO_PORTA, 24, bit) +#define I2C_SDA(bit) at91_set_pio_value(AT91_PIO_PORTA, 23, bit) +#define I2C_DELAY udelay(100) +#define I2C_READ at91_get_pio_value(AT91_PIO_PORTA, 23) + +/* DHCP/BOOTP options */ +#ifdef CONFIG_CMD_DHCP +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_SYS_AUTOLOAD "n" +#endif + +/* File systems */ +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS +#if defined(CONFIG_CMD_MTDPARTS) || defined(CONFIG_CMD_NAND) +#define MTDIDS_DEFAULT "nand0=atmel_nand" +#define MTDPARTS_DEFAULT "mtdparts=atmel_nand:-(root)" +#endif +#if defined(CONFIG_CMD_REISER) || defined(CONFIG_CMD_EXT2) || \ + defined(CONFIG_CMD_USB) || defined(CONFIG_MMC) +#define CONFIG_DOS_PARTITION +#endif +#define CONFIG_LZO +#define CONFIG_RBTREE + +/* Boot command */ +#define CONFIG_BOOTDELAY 3 +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_BOOTCOMMAND "cp.b 0xC00C6000 ${loadaddr} 0x294000; bootm" +#if defined(CONFIG_CMD_NAND) +#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ + "root=/dev/mtdblock0 " \ + MTDPARTS_DEFAULT \ + " rw rootfstype=jffs2" +#endif + +/* Misc. u-boot settings */ +#define CONFIG_SYS_PROMPT "U-Boot> " +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + 16 \ + + sizeof(CONFIG_SYS_PROMPT)) +#define CONFIG_SYS_LONGHELP +#define CONFIG_CMDLINE_EDITING + +#endif diff --git a/include/configs/flea3.h b/include/configs/flea3.h index d88c578a70..aac3930f0a 100644 --- a/include/configs/flea3.h +++ b/include/configs/flea3.h @@ -77,7 +77,7 @@ * UART (console) */ #define CONFIG_MXC_UART -#define CONFIG_SYS_MX35_UART3 +#define CONFIG_MXC_UART_BASE UART3_BASE /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE @@ -107,7 +107,7 @@ #define CONFIG_BOOTDELAY 3 -#define CONFIG_LOADADDR 0x90800000 /* loadaddr env var */ +#define CONFIG_LOADADDR 0x80800000 /* loadaddr env var */ /* @@ -162,10 +162,10 @@ * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 CSD1_BASE_ADDR +#define PHYS_SDRAM_1 CSD0_BASE_ADDR #define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) -#define CONFIG_SYS_SDRAM_BASE CSD1_BASE_ADDR +#define CONFIG_SYS_SDRAM_BASE CSD0_BASE_ADDR #define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR + 0x10000) #define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE / 2) #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ @@ -181,10 +181,14 @@ #define CONFIG_FLASH_CFI_MTD #define CONFIG_MTD_PARTITIONS #define MTDIDS_DEFAULT "nand0=mxc_nand,nor0=physmap-flash.0" -#define MTDPARTS_DEFAULT "mtdparts=mxc_nand:196m(root1)," \ - "196m(root2),-(user);" \ +#define MTDPARTS_DEFAULT "mtdparts=mxc_nand:50m(root1)," \ + "32m(rootfb)," \ + "64m(pcache)," \ + "64m(app1)," \ + "10m(app2),-(spool);" \ "physmap-flash.0:512k(u-boot),64k(env1)," \ "64k(env2),3776k(kernel1),3776k(kernel2)" + /* * FLASH and environment organization */ @@ -249,10 +253,10 @@ "else run addip_sta;fi\0" \ "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ "addtty=setenv bootargs ${bootargs}" \ - " console=ttymxc0,${baudrate}\0" \ + " console=ttymxc2,${baudrate}\0" \ "addmisc=setenv bootargs ${bootargs} ${misc}\0" \ - "loadaddr=90800000\0" \ - "kernel_addr_r=90800000\0" \ + "loadaddr=80800000\0" \ + "kernel_addr_r=80800000\0" \ "hostname=" xstr(CONFIG_HOSTNAME) "\0" \ "bootfile=" xstr(CONFIG_HOSTNAME) "/uImage\0" \ "ramdisk_file=" xstr(CONFIG_HOSTNAME) "/uRamdisk\0" \ diff --git a/include/configs/hawkboard.h b/include/configs/hawkboard.h index 638643a2b2..12acb27aef 100644 --- a/include/configs/hawkboard.h +++ b/include/configs/hawkboard.h @@ -34,6 +34,7 @@ #define CONFIG_MACH_DAVINCI_HAWK #define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ +#define CONFIG_SOC_DA850 /* TI DA850 SoC */ #define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) #define CONFIG_SYS_OSCIN_FREQ 24000000 #define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE diff --git a/include/configs/igep0020.h b/include/configs/igep0020.h index 279a9d2cc6..56fd6de231 100644 --- a/include/configs/igep0020.h +++ b/include/configs/igep0020.h @@ -27,7 +27,6 @@ */ #define CONFIG_OMAP 1 /* in a TI OMAP core */ #define CONFIG_OMAP34XX 1 /* which is a 34XX */ -#define CONFIG_OMAP3430 1 /* which is in a 3430 */ #define CONFIG_OMAP3_IGEP0020 1 /* working with IGEP0020 */ #define CONFIG_SDRC /* The chip has SDRC controller */ @@ -238,9 +237,6 @@ #define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 meg */ #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 -/* SDRAM Bank Allocation method */ -#define SDRC_R_B_C 1 - /* * FLASH and environment organization */ diff --git a/include/configs/igep0030.h b/include/configs/igep0030.h index d85e5ae59f..36346187f8 100644 --- a/include/configs/igep0030.h +++ b/include/configs/igep0030.h @@ -27,7 +27,6 @@ */ #define CONFIG_OMAP 1 /* in a TI OMAP core */ #define CONFIG_OMAP34XX 1 /* which is a 34XX */ -#define CONFIG_OMAP3430 1 /* which is in a 3430 */ #define CONFIG_OMAP3_IGEP0030 1 /* working with IGEP0030 */ #define CONFIG_SDRC /* The chip has SDRC controller */ @@ -236,9 +235,6 @@ #define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 meg */ #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 -/* SDRAM Bank Allocation method */ -#define SDRC_R_B_C 1 - /* * FLASH and environment organization */ diff --git a/include/configs/imx27lite-common.h b/include/configs/imx27lite-common.h index 6953a800d5..2af4e7af31 100644 --- a/include/configs/imx27lite-common.h +++ b/include/configs/imx27lite-common.h @@ -102,7 +102,7 @@ * Serial Driver info */ #define CONFIG_MXC_UART -#define CONFIG_SYS_MX27_UART1 +#define CONFIG_MXC_UART_BASE UART1_BASE #define CONFIG_CONS_INDEX 1 /* use UART0 for console */ #define CONFIG_BAUDRATE 115200 /* Default baud rate */ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h index 1455ea247a..bbcbce1200 100644 --- a/include/configs/imx31_litekit.h +++ b/include/configs/imx31_litekit.h @@ -63,8 +63,8 @@ * Hardware drivers */ -#define CONFIG_MXC_UART 1 -#define CONFIG_SYS_MX31_UART1 1 +#define CONFIG_MXC_UART +#define CONFIG_MXC_UART_BASE UART1_BASE #define CONFIG_MXC_GPIO #define CONFIG_HARD_SPI 1 diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h index 1b75197c58..3153eb5b39 100644 --- a/include/configs/imx31_phycore.h +++ b/include/configs/imx31_phycore.h @@ -59,7 +59,7 @@ #define CONFIG_SYS_I2C_SLAVE 0xfe #define CONFIG_MXC_UART -#define CONFIG_SYS_MX31_UART1 +#define CONFIG_MXC_UART_BASE UART1_BASE /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE diff --git a/include/configs/netspace_v2.h b/include/configs/lacie_kw.h index bb27ed7648..6cbc752fbd 100644 --- a/include/configs/netspace_v2.h +++ b/include/configs/lacie_kw.h @@ -15,8 +15,8 @@ * GNU General Public License for more details. */ -#ifndef _CONFIG_NETSPACE_V2_H -#define _CONFIG_NETSPACE_V2_H +#ifndef _CONFIG_LACIE_KW_H +#define _CONFIG_LACIE_KW_H /* * Machine number definition @@ -30,6 +30,9 @@ #elif defined(CONFIG_NETSPACE_MAX_V2) #define CONFIG_MACH_TYPE MACH_TYPE_NETSPACE_MAX_V2 #define CONFIG_IDENT_STRING " NS Max v2" +#elif defined(CONFIG_NET2BIG_V2) +#define CONFIG_MACH_TYPE MACH_TYPE_NET2BIG_V2 +#define CONFIG_IDENT_STRING " 2Big v2" #else #error "Unknown board" #endif @@ -56,11 +59,19 @@ #define CONFIG_CMD_USB /* - * Core clock definition. + * Core clock definition */ #define CONFIG_SYS_TCLK 166000000 /* 166MHz */ +/* + * SDRAM configuration + */ +#if defined(CONFIG_NET2BIG_V2) +#define CONFIG_NR_DRAM_BANKS 2 +#else #define CONFIG_NR_DRAM_BANKS 1 +#endif + #ifdef CONFIG_INETSPACE_V2 /* Different SDRAM configuration and size for Internet Space v2 */ #define CONFIG_SYS_KWD_CONFIG ($(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-is2.cfg) @@ -81,12 +92,17 @@ #define CONFIG_ENV_SPI_MAX_HZ 20000000 /* 20Mhz */ #define CONFIG_SYS_IDE_MAXBUS 1 #define CONFIG_SYS_IDE_MAXDEVICE 1 +#if defined(CONFIG_NET2BIG_V2) +#define CONFIG_SYS_PROMPT "2big2> " +#else #define CONFIG_SYS_PROMPT "ns2> " +#endif /* * Ethernet Driver configuration */ #ifdef CONFIG_CMD_NET +#define CONFIG_MISC_INIT_R /* Call misc_init_r() to initialize MAC address */ #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ #define CONFIG_NETCONSOLE #endif @@ -96,11 +112,10 @@ */ #ifdef CONFIG_MVSATA_IDE #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET -/* Network Space Max v2 use 2 SATA ports */ -#ifdef CONFIG_NETSPACE_MAX_V2 +#if defined(CONFIG_NETSPACE_MAX_V2) || defined(CONFIG_NET2BIG_V2) #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET #endif -#endif +#endif /* CONFIG_MVSATA_IDE */ /* * Enable GPI0 support @@ -175,4 +190,4 @@ "usbload=usb start && " \ "fatload usb 0:1 $loadaddr /boot/$bootfile\0" -#endif /* _CONFIG_NETSPACE_V2_H */ +#endif /* _CONFIG_LACIE_KW_H */ diff --git a/include/configs/lubbock.h b/include/configs/lubbock.h index 90c5bf8974..361ffc504e 100644 --- a/include/configs/lubbock.h +++ b/include/configs/lubbock.h @@ -34,7 +34,7 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_PXA250 1 /* This is an PXA250 CPU */ +#define CONFIG_CPU_PXA25X 1 /* This is an PXA250 CPU */ #define CONFIG_LUBBOCK 1 /* on an LUBBOCK Board */ #define CONFIG_LCD 1 #ifdef CONFIG_LCD @@ -175,7 +175,7 @@ #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1) +#define CONFIG_SYS_INIT_SP_ADDR 0xfffff800 #define FPGA_REGS_BASE_PHYSICAL 0x08000000 diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h index 8414376edd..d1ba02b6ee 100644 --- a/include/configs/mx25pdk.h +++ b/include/configs/mx25pdk.h @@ -54,7 +54,7 @@ /* Serial Info */ #define CONFIG_MXC_UART -#define CONFIG_SYS_MX25_UART1 +#define CONFIG_MXC_UART_BASE UART1_BASE #define CONFIG_CONS_INDEX 1 /* use UART0 for console */ #define CONFIG_BAUDRATE 115200 /* Default baud rate */ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h index 7e011aea9d..87638a4fa5 100644 --- a/include/configs/mx31ads.h +++ b/include/configs/mx31ads.h @@ -60,8 +60,8 @@ * Hardware drivers */ -#define CONFIG_MXC_UART 1 -#define CONFIG_SYS_MX31_UART1 1 +#define CONFIG_MXC_UART +#define CONFIG_MXC_UART_BASE UART1_BASE #define CONFIG_HARD_SPI 1 #define CONFIG_MXC_SPI 1 diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h index 4253c3e2bc..4da6020c8c 100644 --- a/include/configs/mx31pdk.h +++ b/include/configs/mx31pdk.h @@ -61,7 +61,7 @@ */ #define CONFIG_MXC_UART -#define CONFIG_SYS_MX31_UART1 +#define CONFIG_MXC_UART_BASE UART1_BASE #define CONFIG_HW_WATCHDOG #define CONFIG_MXC_GPIO diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h index 32ed6096ae..0c62b9fdfb 100644 --- a/include/configs/mx35pdk.h +++ b/include/configs/mx35pdk.h @@ -85,7 +85,7 @@ * UART (console) */ #define CONFIG_MXC_UART -#define CONFIG_SYS_MX35_UART1 +#define CONFIG_MXC_UART_BASE UART1_BASE /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h index 7c7544f5a8..dd53f48b9a 100644 --- a/include/configs/mx51evk.h +++ b/include/configs/mx51evk.h @@ -59,7 +59,7 @@ * Hardware drivers */ #define CONFIG_MXC_UART -#define CONFIG_SYS_MX51_UART1 +#define CONFIG_MXC_UART_BASE UART1_BASE #define CONFIG_MXC_GPIO /* diff --git a/include/configs/mx53ard.h b/include/configs/mx53ard.h index 15dfcb49ed..f48a41ebc5 100644 --- a/include/configs/mx53ard.h +++ b/include/configs/mx53ard.h @@ -44,7 +44,7 @@ #define CONFIG_MXC_GPIO #define CONFIG_MXC_UART -#define CONFIG_SYS_MX53_UART1 +#define CONFIG_MXC_UART_BASE UART1_BASE /* I2C Configs */ #define CONFIG_CMD_I2C diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h index 7c491360f2..11fe6efe62 100644 --- a/include/configs/mx53evk.h +++ b/include/configs/mx53evk.h @@ -47,7 +47,7 @@ #define CONFIG_MXC_GPIO #define CONFIG_MXC_UART -#define CONFIG_SYS_MX53_UART1 +#define CONFIG_MXC_UART_BASE UART1_BASE /* I2C Configs */ #define CONFIG_CMD_I2C diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h index d6990107db..537649ee16 100644 --- a/include/configs/mx53loco.h +++ b/include/configs/mx53loco.h @@ -45,7 +45,7 @@ #define CONFIG_MXC_GPIO #define CONFIG_MXC_UART -#define CONFIG_SYS_MX53_UART1 +#define CONFIG_MXC_UART_BASE UART1_BASE /* MMC Configs */ #define CONFIG_FSL_ESDHC diff --git a/include/configs/mx53smd.h b/include/configs/mx53smd.h index 48b32ddab6..032f72261e 100644 --- a/include/configs/mx53smd.h +++ b/include/configs/mx53smd.h @@ -44,7 +44,7 @@ #define CONFIG_MXC_GPIO #define CONFIG_MXC_UART -#define CONFIG_SYS_MX53_UART1 +#define CONFIG_MXC_UART_BASE UART1_BASE /* I2C Configs */ #define CONFIG_CMD_I2C diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index 15e40c538e..91af8a0256 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -33,7 +33,6 @@ */ #define CONFIG_OMAP 1 /* in a TI OMAP core */ #define CONFIG_OMAP34XX 1 /* which is a 34XX */ -#define CONFIG_OMAP3430 1 /* which is in a 3430 */ #define CONFIG_OMAP3_BEAGLE 1 /* working with BEAGLE */ #define CONFIG_SDRC /* The chip has SDRC controller */ @@ -111,9 +110,6 @@ #define STATUS_LED_BOOT STATUS_LED_BIT #define STATUS_LED_GREEN STATUS_LED_BIT1 -/* DDR - I use Micron DDR */ -#define CONFIG_OMAP3_MICRON_DDR 1 - /* Enable Multi Bus support for I2C */ #define CONFIG_I2C_MULTI_BUS 1 @@ -215,7 +211,7 @@ "rdaddr=0x81000000\0" \ "usbtty=cdc_acm\0" \ "bootfile=uImage.beagle\0" \ - "console=tty02,115200n8\0" \ + "console=ttyO2,115200n8\0" \ "mpurate=auto\0" \ "buddy=none "\ "optargs=\0" \ @@ -337,22 +333,14 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */ -#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */ -#endif /*----------------------------------------------------------------------- * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 -/* SDRAM Bank Allocation method */ -#define SDRC_R_B_C 1 - /*----------------------------------------------------------------------- * FLASH and environment organization */ @@ -390,4 +378,61 @@ #define CONFIG_OMAP3_SPI +#define CONFIG_SYS_CACHELINE_SIZE 64 + +/* Defines for SPL */ +#define CONFIG_SPL +#define CONFIG_SPL_NAND_SIMPLE +#define CONFIG_SPL_TEXT_BASE 0x40200800 +#define CONFIG_SPL_MAX_SIZE (45 * 1024) +#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK + +#define CONFIG_SPL_BSS_START_ADDR 0x80000000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ + +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ +#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 +#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" + +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBDISK_SUPPORT +#define CONFIG_SPL_I2C_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SPL_FAT_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_POWER_SUPPORT +#define CONFIG_SPL_OMAP3_ID_NAND +#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" + +/* NAND boot config */ +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_PAGE_COUNT 64 +#define CONFIG_SYS_NAND_PAGE_SIZE 2048 +#define CONFIG_SYS_NAND_OOBSIZE 64 +#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) +#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 +#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\ + 10, 11, 12, 13} +#define CONFIG_SYS_NAND_ECCSIZE 512 +#define CONFIG_SYS_NAND_ECCBYTES 3 +#define CONFIG_SYS_NAND_ECCSTEPS (CONFIG_SYS_NAND_PAGE_SIZE / \ + CONFIG_SYS_NAND_ECCSIZE) +#define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * \ + CONFIG_SYS_NAND_ECCSTEPS) +#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 + +/* + * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM + * 64 bytes before this address should be set aside for u-boot.img's + * header. That is 0x800FFFC0--0x80100000 should not be used for any + * other needs. + */ +#define CONFIG_SYS_TEXT_BASE 0x80100000 +#define CONFIG_SYS_SPL_MALLOC_START 0x80208000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 + #endif /* __CONFIG_H */ diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index 47ec39f29d..2ce3959fda 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -83,6 +83,20 @@ #define CONFIG_MMC #define CONFIG_GENERIC_MMC #define CONFIG_OMAP_HSMMC + +/* SPL */ +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SPL_FAT_SUPPORT +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ +#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 +#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" + +/* Partition tables */ +/* Only need DOS partition support for SPL, currently */ +#ifndef CONFIG_SPL_BUILD +#define CONFIG_EFI_PARTITION +#endif #define CONFIG_DOS_PARTITION /* USB @@ -94,6 +108,26 @@ #define CONFIG_MUSB_HCD /* #define CONFIG_MUSB_UDC */ +/* NAND SPL */ +#define CONFIG_SPL_NAND_SIMPLE +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_PAGE_COUNT 64 +#define CONFIG_SYS_NAND_PAGE_SIZE 2048 +#define CONFIG_SYS_NAND_OOBSIZE 64 +#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) +#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 +#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\ + 10, 11, 12, 13} +#define CONFIG_SYS_NAND_ECCSIZE 512 +#define CONFIG_SYS_NAND_ECCBYTES 3 +#define CONFIG_SYS_NAND_ECCSTEPS (CONFIG_SYS_NAND_PAGE_SIZE / \ + CONFIG_SYS_NAND_ECCSIZE) +#define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * \ + CONFIG_SYS_NAND_ECCSTEPS) +#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 + /* ----------------------------------------------------------------------------- * Include common board configuration * ----------------------------------------------------------------------------- diff --git a/include/configs/omap3_evm_common.h b/include/configs/omap3_evm_common.h index 54aa7a7858..b256317905 100644 --- a/include/configs/omap3_evm_common.h +++ b/include/configs/omap3_evm_common.h @@ -22,12 +22,10 @@ */ #define CONFIG_OMAP /* This is TI OMAP core */ #define CONFIG_OMAP34XX /* belonging to 34XX family */ -#define CONFIG_OMAP3430 /* which is in a 3430 */ #define CONFIG_SDRC /* The chip has SDRC controller */ #define CONFIG_OMAP3_EVM /* This is a OMAP3 EVM */ -#define CONFIG_OMAP3_MICRON_DDR /* with MICRON DDR part */ #define CONFIG_TWL4030_POWER /* with TWL4030 PMIC */ #undef CONFIG_USE_IRQ /* no support for IRQs */ @@ -59,11 +57,6 @@ */ #define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */ -#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */ -#endif - /* * Physical Memory Map * Note 1: CS1 may or may not be populated @@ -71,12 +64,8 @@ */ #define CONFIG_NR_DRAM_BANKS 2 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_1_SIZE (32 << 20) #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 -/* SDRAM Bank Allocation method */ -#define SDRC_R_B_C - /* Limits for memtest */ #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) #define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ @@ -289,4 +278,34 @@ /* Uncomment to define the board revision statically */ /* #define CONFIG_STATIC_BOARD_REV OMAP3EVM_BOARD_GEN_2 */ +#define CONFIG_SYS_CACHELINE_SIZE 64 + +/* Defines for SPL */ +#define CONFIG_SPL +#define CONFIG_SPL_TEXT_BASE 0x40200800 +#define CONFIG_SPL_MAX_SIZE (45 * 1024) /* 45 KB */ +#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK + +#define CONFIG_SPL_BSS_START_ADDR 0x80000000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ + +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBDISK_SUPPORT +#define CONFIG_SPL_I2C_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_POWER_SUPPORT +#define CONFIG_SPL_OMAP3_ID_NAND +#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" + +/* + * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM + * 64 bytes before this address should be set aside for u-boot.img's + * header. That is 0x800FFFC0--0x80100000 should not be used for any + * other needs. + */ +#define CONFIG_SYS_TEXT_BASE 0x80100000 +#define CONFIG_SYS_SPL_MALLOC_START 0x80208000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 + #endif /* __OMAP3_EVM_COMMON_H */ diff --git a/include/configs/omap3_evm_quick_mmc.h b/include/configs/omap3_evm_quick_mmc.h index 691e4c2984..912da7d074 100644 --- a/include/configs/omap3_evm_quick_mmc.h +++ b/include/configs/omap3_evm_quick_mmc.h @@ -88,4 +88,14 @@ "root=/dev/mmcblk0p2 rw " \ "rootfstype=ext3 rootwait" +/* + * SPL + */ +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SPL_FAT_SUPPORT +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ +#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 +#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" + #endif /* __OMAP3_EVM_QUICK_MMC_H */ diff --git a/include/configs/omap3_evm_quick_nand.h b/include/configs/omap3_evm_quick_nand.h index 2d183140d7..2f879c0bf1 100644 --- a/include/configs/omap3_evm_quick_nand.h +++ b/include/configs/omap3_evm_quick_nand.h @@ -76,4 +76,26 @@ "root=/dev/mtdblock4 rw " \ "rootfstype=jffs2 " +/* + * SPL + */ +#define CONFIG_SPL_NAND_SIMPLE +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_PAGE_COUNT 64 +#define CONFIG_SYS_NAND_PAGE_SIZE 2048 +#define CONFIG_SYS_NAND_OOBSIZE 64 +#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) +#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 +#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\ + 10, 11, 12, 13} +#define CONFIG_SYS_NAND_ECCSIZE 512 +#define CONFIG_SYS_NAND_ECCBYTES 3 +#define CONFIG_SYS_NAND_ECCSTEPS (CONFIG_SYS_NAND_PAGE_SIZE / \ + CONFIG_SYS_NAND_ECCSIZE) +#define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * \ + CONFIG_SYS_NAND_ECCSTEPS) +#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 + #endif /* __OMAP3_EVM_QUICK_NAND_H */ diff --git a/include/configs/omap3_mvblx.h b/include/configs/omap3_mvblx.h index a0252a2999..eb51ea9f9b 100644 --- a/include/configs/omap3_mvblx.h +++ b/include/configs/omap3_mvblx.h @@ -37,7 +37,6 @@ #define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */ #define CONFIG_OMAP 1 /* in a TI OMAP core */ #define CONFIG_OMAP34XX 1 /* which is a 34XX */ -#define CONFIG_OMAP3430 1 /* which is in a 3430 */ #define CONFIG_MVBLX 1 /* working with mvBlueLYNX-X */ #define CONFIG_MACH_TYPE MACH_TYPE_MVBLX @@ -257,10 +256,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */ -#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */ -#endif /*----------------------------------------------------------------------- * Physical Memory Map @@ -270,9 +265,6 @@ #define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 -/* SDRAM Bank Allocation method */ -#define SDRC_R_B_C 1 - #define CONFIG_ENV_IS_NOWHERE 1 /*---------------------------------------------------------------------------- @@ -310,4 +302,6 @@ #define CONFIG_OMAP3_SPI +#define CONFIG_SYS_CACHELINE_SIZE 64 + #endif /* __CONFIG_H */ diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h index afdefd9557..0874716299 100644 --- a/include/configs/omap3_overo.h +++ b/include/configs/omap3_overo.h @@ -25,7 +25,6 @@ */ #define CONFIG_OMAP 1 /* in a TI OMAP core */ #define CONFIG_OMAP34XX 1 /* which is a 34XX */ -#define CONFIG_OMAP3430 1 /* which is in a 3430 */ #define CONFIG_OMAP3_OVERO 1 /* working with overo */ #define CONFIG_SDRC /* The chip has SDRC controller */ @@ -244,10 +243,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */ -#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */ -#endif /*----------------------------------------------------------------------- * Physical Memory Map @@ -257,9 +252,6 @@ #define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 -/* SDRAM Bank Allocation method */ -#define SDRC_R_B_C 1 - /*----------------------------------------------------------------------- * FLASH and environment organization */ @@ -307,4 +299,6 @@ CONFIG_SYS_INIT_RAM_SIZE - \ GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_CACHELINE_SIZE 64 + #endif /* __CONFIG_H */ diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h index 3c2793ea42..1a30454c7d 100644 --- a/include/configs/omap3_pandora.h +++ b/include/configs/omap3_pandora.h @@ -28,7 +28,6 @@ */ #define CONFIG_OMAP 1 /* in a TI OMAP core */ #define CONFIG_OMAP34XX 1 /* which is a 34XX */ -#define CONFIG_OMAP3430 1 /* which is in a 3430 */ #define CONFIG_OMAP3_PANDORA 1 /* working with pandora */ #define CONFIG_SDRC /* The chip has SDRC controller */ @@ -228,10 +227,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */ -#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */ -#endif /*----------------------------------------------------------------------- * Physical Memory Map @@ -241,9 +236,6 @@ #define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 -/* SDRAM Bank Allocation method */ -#define SDRC_R_B_C 1 - #define CONFIG_SYS_TEXT_BASE 0x80008000 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 @@ -278,4 +270,6 @@ #define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET +#define CONFIG_SYS_CACHELINE_SIZE 64 + #endif /* __CONFIG_H */ diff --git a/include/configs/omap3_sdp3430.h b/include/configs/omap3_sdp3430.h index 35472bb044..90f4b9036e 100644 --- a/include/configs/omap3_sdp3430.h +++ b/include/configs/omap3_sdp3430.h @@ -38,7 +38,6 @@ */ #define CONFIG_OMAP 1 /* in a TI OMAP core */ #define CONFIG_OMAP34XX 1 /* which is a 34XX */ -#define CONFIG_OMAP3430 1 /* which is in a 3430 */ #define CONFIG_OMAP3_3430SDP 1 /* working with SDP Rev2 */ #define CONFIG_SDRC /* The chip has SDRC controller */ @@ -304,10 +303,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128 << 10) /* Regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack */ -#endif #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 @@ -323,9 +318,6 @@ #define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 meg */ #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 -/* SDRAM Bank Allocation method */ -#define SDRC_R_B_C 1 - /*--------------------------------------------------------------------------*/ /* @@ -358,4 +350,6 @@ * - rest for filesystem */ +#define CONFIG_SYS_CACHELINE_SIZE 64 + #endif /* __CONFIG_H */ diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h index fbac22235c..b0e10c762b 100644 --- a/include/configs/omap3_zoom1.h +++ b/include/configs/omap3_zoom1.h @@ -34,7 +34,6 @@ */ #define CONFIG_OMAP 1 /* in a TI OMAP core */ #define CONFIG_OMAP34XX 1 /* which is a 34XX */ -#define CONFIG_OMAP3430 1 /* which is in a 3430 */ #define CONFIG_OMAP3_ZOOM1 1 /* working with Zoom MDK Rev1 */ #define CONFIG_SDRC /* The chip has SDRC controller */ @@ -259,10 +258,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */ -#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */ -#endif /*----------------------------------------------------------------------- * Physical Memory Map @@ -272,9 +267,6 @@ #define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 -/* SDRAM Bank Allocation method */ -#define SDRC_R_B_C 1 - /*----------------------------------------------------------------------- * FLASH and environment organization */ @@ -303,4 +295,6 @@ #define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET +#define CONFIG_SYS_CACHELINE_SIZE 64 + #endif /* __CONFIG_H */ diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h index 8de3d317f0..8a37ebfa3a 100644 --- a/include/configs/omap3_zoom2.h +++ b/include/configs/omap3_zoom2.h @@ -35,7 +35,6 @@ */ #define CONFIG_OMAP 1 /* in a TI OMAP core */ #define CONFIG_OMAP34XX 1 /* which is a 34XX */ -#define CONFIG_OMAP3430 1 /* which is in a 3430 */ #define CONFIG_OMAP3_ZOOM2 1 /* working with Zoom II */ #define CONFIG_SDRC /* The chip has SDRC controller */ @@ -227,10 +226,6 @@ * The stack sizes are set up in start.S using these settings */ #define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */ -#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */ -#endif /*----------------------------------------------------------------------- * Physical Memory Map @@ -240,9 +235,6 @@ #define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 -/* SDRAM Bank Allocation method */ -#define SDRC_R_B_C 1 - /*----------------------------------------------------------------------- * FLASH and environment organization */ @@ -269,4 +261,6 @@ #define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET +#define CONFIG_SYS_CACHELINE_SIZE 64 + #endif /* __CONFIG_H */ diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h index 42a8f10ade..a989721afc 100644 --- a/include/configs/omap4_common.h +++ b/include/configs/omap4_common.h @@ -150,7 +150,7 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x82000000\0" \ - "console=ttyS2,115200n8\0" \ + "console=ttyO2,115200n8\0" \ "usbtty=cdc_acm\0" \ "vram=16M\0" \ "mmcdev=0\0" \ @@ -239,6 +239,7 @@ #define CONFIG_SYS_L2_PL310 1 #define CONFIG_SYS_PL310_BASE 0x48242000 #endif +#define CONFIG_SYS_CACHELINE_SIZE 32 /* Defines for SDRAM init */ #define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS @@ -254,18 +255,21 @@ #define CONFIG_SPL_MAX_SIZE (38 * 1024) #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK -#define CONFIG_SPL_BSS_START_ADDR 0x80000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ /* - * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM * 64 bytes before this address should be set aside for u-boot.img's - * header. That is 0x800FFFC0--0x80100000 should not be used for any + * header. That is 80E7FFC0--0x80E80000 should not be used for any * other needs. */ -#define CONFIG_SYS_TEXT_BASE 0x80100000 -#define CONFIG_SYS_SPL_MALLOC_START 0x80200000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */ +#define CONFIG_SYS_TEXT_BASE 0x80E80000 +/* + * BSS and malloc area 64MB into memory to allow enough + * space for the kernel at the beginning of memory + */ +#define CONFIG_SPL_BSS_START_ADDR 0x84000000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */ +#define CONFIG_SYS_SPL_MALLOC_START 0x84100000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ diff --git a/include/configs/omap5_evm.h b/include/configs/omap5_evm.h index b763f01b21..d3d526310e 100644 --- a/include/configs/omap5_evm.h +++ b/include/configs/omap5_evm.h @@ -254,9 +254,6 @@ #define CONFIG_SPL_MAX_SIZE 0x1E000 /* 120K */ #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK -#define CONFIG_SPL_BSS_START_ADDR 0x80000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ - #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ #define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 @@ -272,13 +269,19 @@ #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/omap-common/u-boot-spl.lds" /* - * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM * 64 bytes before this address should be set aside for u-boot.img's - * header. That is 0x800FFFC0--0x80100000 should not be used for any + * header. That is 80E7FFC0--0x80E80000 should not be used for any * other needs. */ -#define CONFIG_SYS_TEXT_BASE 0x80100000 -#define CONFIG_SYS_SPL_MALLOC_START 0x80200000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */ +#define CONFIG_SYS_TEXT_BASE 0x80E80000 + +/* + * BSS and malloc area 64MB into memory to allow enough + * space for the kernel at the beginning of memory + */ +#define CONFIG_SPL_BSS_START_ADDR 0x84000000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */ +#define CONFIG_SYS_SPL_MALLOC_START 0x84100000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */ #endif /* __CONFIG_H */ diff --git a/include/configs/palmld.h b/include/configs/palmld.h index 514bcaa58e..88f4bfb453 100644 --- a/include/configs/palmld.h +++ b/include/configs/palmld.h @@ -25,7 +25,7 @@ /* * High Level Board Configuration Options */ -#define CONFIG_PXA27X 1 /* Marvell PXA270 CPU */ +#define CONFIG_CPU_PXA27X 1 /* Marvell PXA270 CPU */ #define CONFIG_PALMLD 1 /* Palm LifeDrive board */ /* diff --git a/include/configs/palmtc.h b/include/configs/palmtc.h index bdb5f57e42..d1fef258ce 100644 --- a/include/configs/palmtc.h +++ b/include/configs/palmtc.h @@ -27,7 +27,7 @@ /* * High Level Board Configuration Options */ -#define CONFIG_PXA250 1 /* Intel PXA255 CPU */ +#define CONFIG_CPU_PXA25X 1 /* Intel PXA255 CPU */ #define CONFIG_PALMTC 1 /* Palm Tungsten|C board */ /* @@ -157,7 +157,7 @@ #define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_DRAM_BASE #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1) +#define CONFIG_SYS_INIT_SP_ADDR 0xfffff800 /* * NOR FLASH diff --git a/include/configs/pleb2.h b/include/configs/pleb2.h deleted file mode 100644 index 2aeb7fb34e..0000000000 --- a/include/configs/pleb2.h +++ /dev/null @@ -1,266 +0,0 @@ -/* - * (C) Copyright 2002 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * Configuration settings for the PLEB 2 board. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_PXA250 1 /* This is an PXA255 CPU */ -#define CONFIG_PLEB2 1 /* on an PLEB2 Board */ -#undef CONFIG_LCD -#undef CONFIG_MMC -#define CONFIG_BOARD_LATE_INIT -#define CONFIG_SYS_TEXT_BASE 0x0 - -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ - -/* we will never enable dcache, because we have to setup MMU first */ -#define CONFIG_SYS_DCACHE_OFF - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -/* - * Hardware drivers - */ - -/* None - PLEB 2 doesn't have any of this. - #define CONFIG_LAN91C96 - #define CONFIG_LAN91C96_BASE 0x0C000000 - */ - -/* - * select serial console configuration - */ -#define CONFIG_PXA_SERIAL -#define CONFIG_FFUART 1 /* we use FFUART on PLEB 2 */ - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BAUDRATE 115200 - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#undef CONFIG_CMD_NET -#undef CONFIG_CMD_NFS - - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_ETHADDR 08:00:3e:26:0a:5b -#define CONFIG_NETMASK 255.255.0.0 -#define CONFIG_IPADDR 192.168.0.21 -#define CONFIG_SERVERIP 192.168.0.250 -#define CONFIG_BOOTCOMMAND "bootm 40000" -#define CONFIG_BOOTARGS "root=/dev/mtdblock2 prompt_ramdisk=0 load_ramdisk=1 console=ttyS0,115200" - -#define CONFIG_CMDLINE_TAG -#define CONFIG_INITRD_TAG -#define CONFIG_SETUP_MEMORY_TAGS - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_HUSH_PARSER 1 -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#ifdef CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT "$ " /* Monitor Command Prompt */ -#else -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#endif -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_DEVICE_NULLDEV 1 - -#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0xa2000000 /* default load address */ - -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_CPUSPEED 0x141 /* set core clock to 200/200/100 MHz */ - - /* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -#ifdef CONFIG_MMC -#define CONFIG_PXA_MMC -#define CONFIG_CMD_MMC -#endif - -/* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/* - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ - -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ -#define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */ -#define PHYS_FLASH_SIZE 0x00800000 /* 4 MB */ - -/* Not entirely sure about this - DS/CHC */ -#define PHYS_FLASH_BANK_SIZE 0x02000000 /* 32 MB Banks */ -#define PHYS_FLASH_SECT_SIZE 0x00010000 /* 64 KB sectors (x2) */ - -#define CONFIG_SYS_DRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_DRAM_SIZE PHYS_SDRAM_1_SIZE - -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1) - -/* - * GPIO settings - */ -#define CONFIG_SYS_GPSR0_VAL 0x00000000 /* Don't set anything */ -#define CONFIG_SYS_GPSR1_VAL 0x00000080 -#define CONFIG_SYS_GPSR2_VAL 0x00000000 - -#define CONFIG_SYS_GPCR0_VAL 0x00000000 /* Don't clear anything */ -#define CONFIG_SYS_GPCR1_VAL 0x00000000 -#define CONFIG_SYS_GPCR2_VAL 0x00000000 - -#define CONFIG_SYS_GPDR0_VAL 0x00000000 -#define CONFIG_SYS_GPDR1_VAL 0x000007C3 -#define CONFIG_SYS_GPDR2_VAL 0x00000000 - -/* Edge detect registers (these are set by the kernel) */ -#define CONFIG_SYS_GRER0_VAL 0x00000000 -#define CONFIG_SYS_GRER1_VAL 0x00000000 -#define CONFIG_SYS_GRER2_VAL 0x00000000 -#define CONFIG_SYS_GFER0_VAL 0x00000000 -#define CONFIG_SYS_GFER1_VAL 0x00000000 -#define CONFIG_SYS_GFER2_VAL 0x00000000 - -#define CONFIG_SYS_GAFR0_L_VAL 0x00000000 -#define CONFIG_SYS_GAFR0_U_VAL 0x00000000 -#define CONFIG_SYS_GAFR1_L_VAL 0x00008010 /* Use FF UART Send and Receive */ -#define CONFIG_SYS_GAFR1_U_VAL 0x00000000 -#define CONFIG_SYS_GAFR2_L_VAL 0x00000000 -#define CONFIG_SYS_GAFR2_U_VAL 0x00000000 - -#define CONFIG_SYS_PSSR_VAL 0x20 -#define CONFIG_SYS_CCCR 0x00000141 /* 100 MHz memory, 200 MHz CPU */ -#define CONFIG_SYS_CKEN 0x00000060 /* FFUART and STUART enabled */ -#define CONFIG_SYS_ICMR 0x00000000 /* No interrupts enabled */ - -/* - * Memory settings - */ -#define CONFIG_SYS_MSC0_VAL 0x00007FF0 /* Not properly calculated - FIXME (DS) */ -#define CONFIG_SYS_MSC1_VAL 0x00000000 -#define CONFIG_SYS_MSC2_VAL 0x00000000 - -#define CONFIG_SYS_MDCNFG_VAL 0x00000aC9 /* Memory timings for the SDRAM. - tRP=2, CL=2, tRCD=2, tRAS=5, tRC=8 */ - -#define CONFIG_SYS_MDREFR_VAL 0x00403018 /* Initial setting, individual */ - /* bits set in lowlevel_init.S */ -#define CONFIG_SYS_MDMRS_VAL 0x00000000 - -#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 -#define CONFIG_SYS_SXCNFG_VAL 0x00000000 - -/* - * PCMCIA and CF Interfaces - */ -#define CONFIG_SYS_MECR_VAL 0x00000000 /* Hangover from Lubbock. - Needs calculating. (DS/CHC) */ -#define CONFIG_SYS_MCMEM0_VAL 0x00010504 -#define CONFIG_SYS_MCMEM1_VAL 0x00010504 -#define CONFIG_SYS_MCATT0_VAL 0x00010504 -#define CONFIG_SYS_MCATT1_VAL 0x00010504 -#define CONFIG_SYS_MCIO0_VAL 0x00004715 -#define CONFIG_SYS_MCIO1_VAL 0x00004715 - -/* - * FLASH and environment organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 64 /* max number of sectors on one chip */ - -/* timeout values are in ticks */ -/* FIXME */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (25*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (25*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -/* Flash protection */ -#define CONFIG_SYS_FLASH_PROTECTION 1 - -/* FIXME */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x3C000) /* Addr of Environment Sector */ -#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment */ -#define CONFIG_ENV_SECT_SIZE 0x20000 - -/* Option added to get around byte ordering issues in the flash driver */ -#define CONFIG_SYS_LITTLE_ENDIAN 1 - -#endif /* __CONFIG_H */ diff --git a/include/configs/pxa-common.h b/include/configs/pxa-common.h new file mode 100644 index 0000000000..e8ddda6661 --- /dev/null +++ b/include/configs/pxa-common.h @@ -0,0 +1,60 @@ +/* + * Toradex Colibri PXA270 configuration file + * + * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_PXA_COMMON_H__ +#define __CONFIG_PXA_COMMON_H__ + +#define CONFIG_DISPLAY_CPUINFO + +/* + * KGDB + */ +#ifdef CONFIG_CMD_KGDB +#define CONFIG_KGDB_BAUDRATE 230400 +#define CONFIG_KGDB_SER_INDEX 2 +#endif + +/* + * MMC Card Configuration + */ +#ifdef CONFIG_CMD_MMC +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_PXA_MMC_GENERIC +#define CONFIG_CMD_FAT +#define CONFIG_CMD_EXT2 +#define CONFIG_DOS_PARTITION +#endif + +/* + * OHCI USB + */ +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_OHCI_NEW +#define CONFIG_SYS_USB_OHCI_CPU_INIT +#define CONFIG_SYS_USB_OHCI_BOARD_INIT +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 +#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x4c000000 +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "pxa-ohci" +#define CONFIG_USB_STORAGE +#endif + +#endif /* __CONFIG_PXA_COMMON_H__ */ diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h index 620d270893..0666f7ba4f 100644 --- a/include/configs/pxa255_idp.h +++ b/include/configs/pxa255_idp.h @@ -55,7 +55,7 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_PXA250 1 /* This is an PXA250 CPU */ +#define CONFIG_CPU_PXA25X 1 /* This is an PXA250 CPU */ #undef CONFIG_LCD #ifdef CONFIG_LCD @@ -291,7 +291,7 @@ #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1) +#define CONFIG_SYS_INIT_SP_ADDR 0xfffff800 /* * GPIO settings diff --git a/include/configs/qong.h b/include/configs/qong.h index 3346802d13..3e36bb0788 100644 --- a/include/configs/qong.h +++ b/include/configs/qong.h @@ -49,8 +49,8 @@ * Hardware drivers */ -#define CONFIG_MXC_UART 1 -#define CONFIG_SYS_MX31_UART1 1 +#define CONFIG_MXC_UART +#define CONFIG_MXC_UART_BASE UART1_BASE #define CONFIG_MXC_GPIO #define CONFIG_HW_WATCHDOG diff --git a/include/configs/trizepsiv.h b/include/configs/trizepsiv.h index 2d55044ede..af464e1bea 100644 --- a/include/configs/trizepsiv.h +++ b/include/configs/trizepsiv.h @@ -40,7 +40,7 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_PXA27X 1 /* This is an PXA27x CPU */ +#define CONFIG_CPU_PXA27X 1 /* This is an PXA27x CPU */ #define CONFIG_MMC 1 #define CONFIG_BOARD_LATE_INIT diff --git a/include/configs/tt01.h b/include/configs/tt01.h index 6ef25cd647..a553712699 100644 --- a/include/configs/tt01.h +++ b/include/configs/tt01.h @@ -148,7 +148,7 @@ * make sure that the transceiver is enabled during PL=1 for testing! */ #define CONFIG_MXC_UART -#define CONFIG_SYS_MX31_UART2 +#define CONFIG_MXC_UART_BASE UART2_BASE #define CONFIG_MXC_SPI #define CONFIG_MXC_GPIO diff --git a/include/configs/tx25.h b/include/configs/tx25.h index f77c546687..87bd8a6756 100644 --- a/include/configs/tx25.h +++ b/include/configs/tx25.h @@ -90,7 +90,7 @@ * Serial Info */ #define CONFIG_MXC_UART -#define CONFIG_SYS_MX25_UART1 +#define CONFIG_MXC_UART_BASE UART1_BASE #define CONFIG_CONS_INDEX 1 /* use UART0 for console */ #define CONFIG_BAUDRATE 115200 /* Default baud rate */ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } diff --git a/include/configs/vision2.h b/include/configs/vision2.h index f321ad2dbc..35b71f79e6 100644 --- a/include/configs/vision2.h +++ b/include/configs/vision2.h @@ -54,7 +54,7 @@ * Hardware drivers */ #define CONFIG_MXC_UART -#define CONFIG_SYS_MX51_UART3 +#define CONFIG_MXC_UART_BASE UART3_BASE #define CONFIG_MXC_GPIO #define CONFIG_MXC_SPI #define CONFIG_HW_WATCHDOG diff --git a/include/configs/vpac270.h b/include/configs/vpac270.h index dd68c66dfa..7802f4449d 100644 --- a/include/configs/vpac270.h +++ b/include/configs/vpac270.h @@ -25,9 +25,19 @@ /* * High Level Board Configuration Options */ -#define CONFIG_PXA27X 1 /* Marvell PXA270 CPU */ +#define CONFIG_CPU_PXA27X 1 /* Marvell PXA270 CPU */ #define CONFIG_VPAC270 1 /* Voipac PXA270 board */ -#define CONFIG_SYS_TEXT_BASE 0x0 +#define CONFIG_SYS_TEXT_BASE 0xa0000000 + +#ifdef CONFIG_ONENAND +#define CONFIG_SPL +#define CONFIG_SPL_ONENAND_SUPPORT +#define CONFIG_SPL_ONENAND_LOAD_ADDR 0x2000 +#define CONFIG_SPL_ONENAND_LOAD_SIZE \ + (512 * 1024 - CONFIG_SPL_ONENAND_LOAD_ADDR) +#define CONFIG_SPL_TEXT_BASE 0x5c000000 +#define CONFIG_SPL_LDSCRIPT "board/vpac270/u-boot-spl.lds" +#endif /* * Environment settings @@ -46,12 +56,19 @@ "bootm 0xa4000000; " \ "fi; " \ "bootm 0x60000;" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "update_onenand=" \ + "onenand erase 0x0 0x80000 ; " \ + "onenand write 0xa0000000 0x0 0x80000" + #define CONFIG_BOOTARGS "console=tty0 console=ttyS0,115200" #define CONFIG_TIMESTAMP #define CONFIG_BOOTDELAY 2 /* Autoboot delay */ #define CONFIG_CMDLINE_TAG #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_LZMA /* LZMA compression support */ +#define CONFIG_OF_LIBFDT /* * Serial Console Configuration @@ -141,6 +158,8 @@ #define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE #define CONFIG_SYS_DEVICE_NULLDEV 1 +#define CONFIG_CMDLINE_EDITING 1 +#define CONFIG_AUTO_COMPLETE 1 /* * Clock Configuration @@ -180,19 +199,18 @@ #define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ #define CONFIG_SYS_LOAD_ADDR PHYS_SDRAM_1 -#define CONFIG_SYS_IPL_LOAD_ADDR (0x5c000000) #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR \ - (PHYS_SDRAM_1 + GENERATED_GBL_DATA_SIZE + 2048) +#define CONFIG_SYS_INIT_SP_ADDR 0x5c010000 /* * NOR FLASH */ #define CONFIG_SYS_MONITOR_BASE 0x0 -#define CONFIG_SYS_MONITOR_LEN 0x40000 +#define CONFIG_SYS_MONITOR_LEN 0x80000 #define CONFIG_ENV_ADDR \ (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) -#define CONFIG_ENV_SIZE 0x4000 +#define CONFIG_ENV_SIZE 0x20000 +#define CONFIG_ENV_SECT_SIZE 0x20000 #if defined(CONFIG_CMD_FLASH) /* NOR */ #define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ @@ -221,22 +239,11 @@ #define CONFIG_ENV_IS_IN_FLASH 1 -/* - * The first four sectors of the NOR flash are 0x8000 bytes big, the rest of the - * flash consists of 0x20000 bytes big sectors. - */ -#if (CONFIG_ENV_ADDR <= 0x18000) -#define CONFIG_ENV_SECT_SIZE 0x8000 -#else -#define CONFIG_ENV_SECT_SIZE 0x20000 -#endif - #elif defined(CONFIG_CMD_ONENAND) /* OneNAND */ #define CONFIG_SYS_NO_FLASH #define CONFIG_SYS_ONENAND_BASE 0x00000000 #define CONFIG_ENV_IS_IN_ONENAND 1 -#define CONFIG_ENV_SECT_SIZE 0x20000 #else /* No flash */ #define CONFIG_SYS_NO_FLASH diff --git a/include/configs/xaeniax.h b/include/configs/xaeniax.h index 6dce8aeaf1..941f80cb97 100644 --- a/include/configs/xaeniax.h +++ b/include/configs/xaeniax.h @@ -40,7 +40,7 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_PXA250 1 /* This is an PXA255 CPU */ +#define CONFIG_CPU_PXA25X 1 /* This is an PXA255 CPU */ #define CONFIG_XAENIAX 1 /* on a xaeniax board */ #define CONFIG_SYS_TEXT_BASE 0x0 @@ -168,7 +168,7 @@ #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1) +#define CONFIG_SYS_INIT_SP_ADDR 0xfffff800 /* * FLASH and environment organization diff --git a/include/configs/xm250.h b/include/configs/xm250.h deleted file mode 100644 index a35bce3703..0000000000 --- a/include/configs/xm250.h +++ /dev/null @@ -1,369 +0,0 @@ -/* - * (C) Copyright 2002 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_PXA250 1 /* This is an PXA250 CPU */ -#define CONFIG_XM250 1 /* on a MicroSys XM250 Board */ -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ -#define CONFIG_SYS_TEXT_BASE 0x0 - -/* we will never enable dcache, because we have to setup MMU first */ -#define CONFIG_SYS_DCACHE_OFF - -/* - * Size of malloc() pool; this lives below the uppermost 128 KiB which are - * used for the RAM copy of the uboot code - * - */ -#define CONFIG_SYS_MALLOC_LEN (256*1024) - -/* - * Hardware drivers - */ -#define CONFIG_SMC91111 -#define CONFIG_SMC91111_BASE 0x04000300 -#undef CONFIG_SMC91111_EXT_PHY -#define CONFIG_SMC_USE_32_BIT -#undef CONFIG_SHOW_ACTIVITY -#define CONFIG_NET_RETRY_COUNT 10 /* # of retries */ - -/* - * I2C bus - */ -#define CONFIG_I2C_MV 1 -#define CONFIG_MV_I2C_REG 0x40301680 -#define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_SPEED 50000 -#define CONFIG_SYS_I2C_SLAVE 0xfe - -#define CONFIG_RTC_PCF8563 1 -#define CONFIG_SYS_I2C_RTC_ADDR 0x51 - -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x58 /* A0 = 0 (hardwired) */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* 4 bits = 16 octets */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* between stop and start */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* length of address */ -#define CONFIG_SYS_EEPROM_SIZE 2048 /* size in bytes */ -#undef CONFIG_SYS_I2C_INIT_BOARD /* board has no own init */ - -/* - * select serial console configuration - */ -#define CONFIG_PXA_SERIAL -#define CONFIG_FFUART 1 /* we use FFUART */ - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BAUDRATE 115200 - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ELF -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_DATE -#define CONFIG_CMD_I2C - - -#define CONFIG_BOOTDELAY 3 - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0xa3000000 /* default load address */ - -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_CPUSPEED 0x161 /* set core clock to 400/400/100 MHz */ - - /* valid baudrates */ - -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -/* - * Definitions related to passing arguments to kernel. - */ -#define CONFIG_CMDLINE_TAG 1 /* send commandline to Kernel */ -#define CONFIG_SETUP_MEMORY_TAGS 1 /* send memory definition to kernel */ -#define CONFIG_INITRD_TAG 1 /* do not send initrd params */ - -/* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/* - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 4 -#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ -#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */ -#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */ -#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */ -#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */ -#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */ -#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */ - -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ -#define PHYS_FLASH_2 0x04000000 /* Flash Bank #1 */ -#define PHYS_FLASH_SIZE 0x01000000 /* 16 MB */ -#define PHYS_FLASH_BANK_SIZE 0x01000000 /* 16 MB Banks */ -#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors (x2) */ - -#define CONFIG_SYS_DRAM_BASE 0xa0000000 -#define CONFIG_SYS_DRAM_SIZE 0x04000000 - -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1) - -/* - * FLASH and environment organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */ -#define CONFIG_SYS_FLASH_LOCK_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Set Lock Bit */ -#define CONFIG_SYS_FLASH_UNLOCK_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Clear Lock Bits */ -#define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x40000) /* Addr of Environment Sector */ -#define CONFIG_ENV_SIZE 0x4000 -#define CONFIG_ENV_SECT_SIZE 0x40000 /* Size of the Environment Sector */ -#define CONFIG_SYS_MONITOR_LEN 0x20000 /* 128 KiB */ - -/****************************************************************************** - * - * CPU specific defines - * - ******************************************************************************/ - -/* - * GPIO settings - * - * GPIO pin assignments - * GPIO Name Dir Out AF - * 0 NC - * 1 NC - * 2 SIRQ1 I - * 3 SIRQ2 I - * 4 SIRQ3 I - * 5 DMAACK1 O 0 - * 6 DMAACK2 O 0 - * 7 DMAACK3 O 0 - * 8 TC1 O 0 - * 9 TC2 O 0 - * 10 TC3 O 0 - * 11 nDMAEN O 1 - * 12 AENCTRL O 0 - * 13 PLDTC O 0 - * 14 ETHIRQ I - * 15 NC - * 16 NC - * 17 NC - * 18 RDY I - * 19 DMASIO I - * 20 ETHIRQ NC - * 21 NC - * 22 PGMEN O 1 FIXME for debug only enable flash - * 23 NC - * 24 NC - * 25 NC - * 26 NC - * 27 NC - * 28 NC - * 29 NC - * 30 NC - * 31 NC - * 32 NC - * 33 NC - * 34 FFRXD I 01 - * 35 FFCTS I 01 - * 36 FFDCD I 01 - * 37 FFDSR I 01 - * 38 FFRI I 01 - * 39 FFTXD O 1 10 - * 40 FFDTR O 0 10 - * 41 FFRTS O 0 10 - * 42 RS232FOFF O 0 00 - * 43 NC - * 44 NC - * 45 IRSL0 O 0 - * 46 IRRX0 I 01 - * 47 IRTX0 O 0 10 - * 48 NC - * 49 nIOWE O 0 - * 50 NC - * 51 NC - * 52 NC - * 53 NC - * 54 NC - * 55 NC - * 56 NC - * 57 NC - * 58 DKDIRQ I - * 59 NC - * 60 NC - * 61 NC - * 62 NC - * 63 NC - * 64 COMLED O 0 - * 65 COMLED O 0 - * 66 COMLED O 0 - * 67 COMLED O 0 - * 68 COMLED O 0 - * 69 COMLED O 0 - * 70 COMLED O 0 - * 71 COMLED O 0 - * 72 NC - * 73 NC - * 74 NC - * 75 NC - * 76 NC - * 77 NC - * 78 CSIO O 1 - * 79 NC - * 80 CSETH O 1 - * - * NOTE: All NC's are defined to be outputs - * - */ -/* Pin direction control */ -#define CONFIG_SYS_GPDR0_VAL 0xd3808000 -#define CONFIG_SYS_GPDR1_VAL 0xfcffab83 -#define CONFIG_SYS_GPDR2_VAL 0x0001ffff -/* Set and Clear registers */ -#define CONFIG_SYS_GPSR0_VAL 0x00008000 -#define CONFIG_SYS_GPSR1_VAL 0x00ff0002 -#define CONFIG_SYS_GPSR2_VAL 0x0001c000 -#define CONFIG_SYS_GPCR0_VAL 0x00000000 -#define CONFIG_SYS_GPCR1_VAL 0x00000000 -#define CONFIG_SYS_GPCR2_VAL 0x00000000 -/* Edge detect registers (these are set by the kernel) */ -#define CONFIG_SYS_GRER0_VAL 0x00002180 -#define CONFIG_SYS_GRER1_VAL 0x00000000 -#define CONFIG_SYS_GRER2_VAL 0x00000000 -#define CONFIG_SYS_GFER0_VAL 0x000043e0 -#define CONFIG_SYS_GFER1_VAL 0x00000000 -#define CONFIG_SYS_GFER2_VAL 0x00000000 -/* Alternate function registers */ -#define CONFIG_SYS_GAFR0_L_VAL 0x80000004 -#define CONFIG_SYS_GAFR0_U_VAL 0x595a8010 -#define CONFIG_SYS_GAFR1_L_VAL 0x699a9559 -#define CONFIG_SYS_GAFR1_U_VAL 0xaaa5aaaa -#define CONFIG_SYS_GAFR2_L_VAL 0xaaaaaaaa -#define CONFIG_SYS_GAFR2_U_VAL 0x00000002 - -/* - * Clocks, power control and interrupts - */ -#define CONFIG_SYS_PSSR_VAL 0x00000030 -#define CONFIG_SYS_CCCR 0x00000161 /* 100 MHz memory, 400 MHz CPU, 400 Turbo */ -#define CONFIG_SYS_CKEN 0x000141ec /* FFUART and STUART enabled */ -#define CONFIG_SYS_ICMR 0x00000000 /* No interrupts enabled */ - -/* FIXME - * - * RTC settings - * Watchdog - * - */ - -/* - * Memory settings - * - */ -#define CONFIG_SYS_MSC0_VAL 0x122423f0 /* FLASH / LAN (cs0)/(cS1) */ -#define CONFIG_SYS_MSC1_VAL 0x35f4aa4c /* USB / ST3+ST5 (cs2)/(cS3) */ -#define CONFIG_SYS_MSC2_VAL 0x35f435fc /* IDE / BCR + WatchDog (cs4)/(cS5) */ -#define CONFIG_SYS_MDCNFG_VAL 0x000009c9 -#define CONFIG_SYS_MDMRS_VAL 0x00220022 -#define CONFIG_SYS_MDREFR_VAL 0x000da018 /* Initial setting, individual bits set in lowlevel_init.S */ -#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 -#define CONFIG_SYS_SXCNFG_VAL 0x00000000 - -/* - * PCMCIA and CF Interfaces (NOT USED, these values from lubbock init) - */ -#define CONFIG_SYS_MECR_VAL 0x00000000 -#define CONFIG_SYS_MCMEM0_VAL 0x00010504 -#define CONFIG_SYS_MCMEM1_VAL 0x00010504 -#define CONFIG_SYS_MCATT0_VAL 0x00010504 -#define CONFIG_SYS_MCATT1_VAL 0x00010504 -#define CONFIG_SYS_MCIO0_VAL 0x00004715 -#define CONFIG_SYS_MCIO1_VAL 0x00004715 - -/* Board specific defines */ - -#ifndef __ASSEMBLY__ - -/* global prototypes */ -void led_code(int code, int color); - -#endif - -#endif /* __CONFIG_H */ diff --git a/include/configs/zipitz2.h b/include/configs/zipitz2.h index 9505007a8e..26204af2c2 100644 --- a/include/configs/zipitz2.h +++ b/include/configs/zipitz2.h @@ -25,7 +25,7 @@ /* * High Level Board Configuration Options */ -#define CONFIG_PXA27X 1 /* Marvell PXA270 CPU */ +#define CONFIG_CPU_PXA27X 1 /* Marvell PXA270 CPU */ #define CONFIG_ZIPITZ2 1 /* Zipit Z2 board */ #define CONFIG_SYS_TEXT_BASE 0x0 diff --git a/include/configs/zmx25.h b/include/configs/zmx25.h index 9a7a27ac1d..599d5bb42a 100644 --- a/include/configs/zmx25.h +++ b/include/configs/zmx25.h @@ -66,7 +66,7 @@ * Serial */ #define CONFIG_MXC_UART -#define CONFIG_SYS_MX25_UART2 +#define CONFIG_MXC_UART_BASE UART2_BASE #define CONFIG_CONS_INDEX 1 /* use UART2 for console */ #define CONFIG_BAUDRATE 115200 /* Default baud rate */ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } diff --git a/include/lcd.h b/include/lcd.h index 83b50f46a4..d95feeb791 100644 --- a/include/lcd.h +++ b/include/lcd.h @@ -87,7 +87,8 @@ typedef struct vidinfo { u_char vl_wbf; /* Wait between frames */ } vidinfo_t; -#elif defined CONFIG_PXA250 || defined CONFIG_PXA27X || defined CONFIG_CPU_MONAHANS +#elif defined(CONFIG_CPU_PXA25X) || defined(CONFIG_CPU_PXA27X) || \ + defined CONFIG_CPU_MONAHANS /* * PXA LCD DMA descriptor */ @@ -195,7 +196,7 @@ typedef struct vidinfo { void *priv; /* Pointer to driver-specific data */ } vidinfo_t; -#endif /* CONFIG_MPC823, CONFIG_PXA250 or CONFIG_MCC200 or CONFIG_ATMEL_LCD */ +#endif /* CONFIG_MPC823, CONFIG_CPU_PXA25X, CONFIG_MCC200, CONFIG_ATMEL_LCD */ extern vidinfo_t panel_info; diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 987a2ec85d..1cdc7ae279 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -623,4 +623,11 @@ struct platform_nand_chip *get_platform_nandchip(struct mtd_info *mtd) return chip->priv; } +/* Standard NAND functions from nand_base.c */ +void nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len); +void nand_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len); +void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len); +void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len); +uint8_t nand_read_byte(struct mtd_info *mtd); + #endif /* __LINUX_MTD_NAND_H */ diff --git a/include/mc13892.h b/include/mc13892.h index 8138bb72fa..ea4127215e 100644 --- a/include/mc13892.h +++ b/include/mc13892.h @@ -139,6 +139,22 @@ #define VCAM_3_0 (3 << 16) #define VCAM_MASK (3 << 16) +/* Reg Mode 0 */ +#define VGEN1EN (1 << 0) +#define VGEN1STBY (1 << 1) +#define VGEN1MODE (1 << 2) +#define VIOHIEN (1 << 3) +#define VIOHISTBY (1 << 4) +#define VDIGEN (1 << 9) +#define VDIGSTBY (1 << 10) +#define VGEN2EN (1 << 12) +#define VGEN2STBY (1 << 13) +#define VGEN2MODE (1 << 14) +#define VPLLEN (1 << 15) +#define VPLLSTBY (1 << 16) +#define VUSBEN (1 << 18) +#define VUSBSTBY (1 << 19) + /* Reg Mode 1 */ #define VGEN3EN (1 << 0) #define VGEN3STBY (1 << 1) diff --git a/include/nand.h b/include/nand.h index b4140794c5..d444ddcefe 100644 --- a/include/nand.h +++ b/include/nand.h @@ -135,9 +135,6 @@ int nand_get_lock_status(nand_info_t *meminfo, loff_t offset); int nand_spl_load_image(uint32_t offs, unsigned int size, void *dst); void nand_deselect(void); -void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len); -void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len); - #ifdef CONFIG_SYS_NAND_SELECT_DEVICE void board_nand_select_device(struct nand_chip *nand, int chip); #endif |
