* Patches by Robert Schwebel, 26 Jun 2003:

  - logdl
  - csb226
  - innokom

* Patch by Pantelis Antoniou, 25 Jun 2003:
  update NetVia with V2 board support

7 files changed, 508 insertions, 66 deletions

diff --git a/include/commproc.h b/include/commproc.h
index f0ee1792b2..c10525d4e8 100644
--- a/include/commproc.h
+++ b/include/commproc.h
@@ -1191,7 +1191,12 @@ typedef struct scc_enet {
 #define PA_ENET_RCLK	((ushort)0x0200)	/* PA  6 */
 #define PA_ENET_TCLK	((ushort)0x0800)	/* PA  4 */
 
-#define PB_ENET_PDN	((ushort)0x4000)	/* PB 17 */
+#if !defined(CONFIG_NETVIA_VERSION) || CONFIG_NETVIA_VERSION == 1
+# define PB_ENET_PDN	((ushort)0x4000)	/* PB 17 */
+#elif CONFIG_NETVIA_VERSION >= 2
+# define PC_ENET_PDN	((ushort)0x0008)	/* PC 12 */
+#endif
+
 #define PB_ENET_TENA	((ushort)0x2000)	/* PB 18 */
 
 #define PC_ENET_CLSN	((ushort)0x0040)	/* PC  9 */
diff --git a/include/configs/NETVIA.h b/include/configs/NETVIA.h
index 28ae9fa9e3..4e213dec78 100644
--- a/include/configs/NETVIA.h
+++ b/include/configs/NETVIA.h
@@ -38,9 +38,15 @@
 #define CONFIG_NETVIA		1	/* ...on a NetVia board		*/
 #undef  CONFIG_NETVIA_PLL_CLOCK		/* PLL or fixed crystal clock	*/
 
+#if !defined(CONFIG_NETVIA_VERSION) || CONFIG_NETVIA_VERSION == 1
 #define	CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
 #undef	CONFIG_8xx_CONS_SMC2
 #undef	CONFIG_8xx_CONS_NONE
+#else
+#define CONFIG_8xx_CONS_NONE
+#define CONFIG_MAX3100_SERIAL
+#endif
+
 #define CONFIG_BAUDRATE		115200	/* console baudrate = 115kbps	*/
 
 #ifdef CONFIG_NETVIA_PLL_CLOCK
@@ -76,17 +82,28 @@
 
 #define	CONFIG_STATUS_LED	1	/* Status LED enabled		*/
 
+#if defined(CONFIG_NETVIA_VERSION) && CONFIG_NETVIA_VERSION >= 2
+#define CONFIG_BOARD_SPECIFIC_LED	/* version has board specific leds */
+#endif
+
 #undef	CONFIG_CAN_DRIVER		/* CAN Driver support disabled	*/
 
-#define CONFIG_BOOTP_MASK	(CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+#define CONFIG_BOOTP_MASK		(CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE | CONFIG_BOOTP_NISDOMAIN)
 
 #undef CONFIG_MAC_PARTITION
 #undef CONFIG_DOS_PARTITION
 
 #define	CONFIG_RTC_MPC8xx		/* use internal RTC of MPC8xx	*/
 
-#define CONFIG_COMMANDS	      ( CONFIG_CMD_DFL	| \
-				CFG_CMD_DHCP	)
+#define CONFIG_COMMANDS_BASE  ( CONFIG_CMD_DFL	| \
+				CFG_CMD_DHCP	| \
+				CFG_CMD_PING )
+
+#if defined(CONFIG_NETVIA_VERSION) && CONFIG_NETVIA_VERSION >= 2
+#define CONFIG_COMMANDS		(CONFIG_COMMANDS_BASE | CFG_CMD_NAND)
+#else
+#define CONFIG_COMMANDS		CONFIG_COMMANDS_BASE
+#endif
 
 #define CONFIG_BOARD_PRE_INIT
 #define CONFIG_MISC_INIT_R
@@ -168,10 +185,16 @@
 #define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
 #define	CFG_ENV_IS_IN_FLASH	1
-#define	CFG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
-#define	CFG_ENV_SIZE		0x1000	/* Total Size of Environment Sector	*/
 #define CFG_ENV_SECT_SIZE	0x10000
 
+#define	CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x60000)
+#define CFG_ENV_OFFSET		0
+#define	CFG_ENV_SIZE		0x4000
+
+#define CFG_ENV_ADDR_REDUND	(CFG_FLASH_BASE + 0x70000)
+#define CFG_ENV_OFFSET_REDUND	0
+#define CFG_ENV_SIZE_REDUND	CFG_ENV_SIZE
+
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
@@ -277,22 +300,6 @@
 #define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
 
 /*
- * BR1/2 and OR1/2 (4MByte Flash Bank x 2)
- *
- */
-#define FLASH0_SIZE	0x00400000	/* 4MByte */
-#define FLASH0_BASE	0xF0000000
-
-#define CFG_OR1_PRELIM	((0xFFFFFFFFLU & ~(FLASH0_SIZE - 1)) | OR_CSNT_SAM | OR_BI | OR_SCY_5_CLK | OR_TRLX)
-#define CFG_BR1_PRELIM	((FLASH0_BASE & BR_BA_MSK) | BR_PS_32 | BR_V)
-
-#define FLASH1_SIZE	0x00400000
-#define FLASH1_BASE	0xF0400000
-
-#define CFG_OR2_PRELIM	((0xFFFFFFFFLU & ~(FLASH1_SIZE - 1)) | OR_CSNT_SAM | OR_BI | OR_SCY_5_CLK | OR_TRLX)
-#define CFG_BR2_PRELIM	((FLASH1_BASE & BR_BA_MSK) | BR_PS_32 | BR_V)
-
-/*
  * BR3 and OR3 (SDRAM)
  *
  */
@@ -306,16 +313,6 @@
 #define CFG_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_PS_32 | BR_V)
 
 /*
- * BR6 (External register)
- * 16 bit port size - leds are at high 8 bits
- */
-#define EXTREG_BASE			0x30000000	/* external register				*/
-#define EXTREG_SIZE			0x00010000	/* max 64K							*/
-
-#define CFG_OR6_PRELIM		((0xFFFFFFFFLU & ~(EXTREG_SIZE - 1)) | OR_CSNT_SAM | OR_BI | OR_SCY_15_CLK | OR_TRLX)
-#define CFG_BR6_PRELIM		((EXTREG_BASE & BR_BA_MSK) | BR_PS_32 | BR_V)
-
-/*
  * Memory Periodic Timer Prescaler
  */
 
@@ -347,4 +344,183 @@
 
 #define CONFIG_ARTOS			/* include ARTOS support */
 
+/****************************************************************/
+
+#define DSP_SIZE	0x00010000	/* 64K */
+#define FPGA_SIZE	0x00010000	/* 64K */
+
+#define DSP0_BASE	0xF1000000
+#define DSP1_BASE	(DSP0_BASE + DSP_SIZE)
+#define FPGA_BASE	(DSP1_BASE + DSP_SIZE)
+
+#if defined(CONFIG_NETVIA_VERSION) && CONFIG_NETVIA_VERSION >= 2
+
+#define ER_SIZE		0x00010000	/* 64K */
+#define ER_BASE		(FPGA_BASE + FPGA_SIZE)
+
+#define NAND_SIZE	0x00010000	/* 64K */
+#define NAND_BASE	(ER_BASE + ER_SIZE)
+
+#endif
+
+/****************************************************************/
+
+#if defined(CONFIG_NETVIA_VERSION) && CONFIG_NETVIA_VERSION >= 2
+
+#define STATUS_LED_BIT		0x00000001		/* bit 31 */
+#define STATUS_LED_PERIOD	(CFG_HZ / 2)
+#define STATUS_LED_STATE	STATUS_LED_BLINKING
+
+#define STATUS_LED_BIT1		0x00000002		/* bit 30 */
+#define STATUS_LED_PERIOD1	(CFG_HZ / 2)
+#define STATUS_LED_STATE1	STATUS_LED_OFF
+
+#define STATUS_LED_ACTIVE	0		/* LED on for bit == 0	*/
+#define STATUS_LED_BOOT		0		/* LED 0 used for boot status */
+
+#endif
+
+/*****************************************************************************/
+
+#if defined(CONFIG_NETVIA_VERSION) && CONFIG_NETVIA_VERSION >= 2
+
+/* NAND */
+#define CFG_NAND_BASE			NAND_BASE
+
+#define CONFIG_MTD_NAND_ECC_JFFS2	1
+
+#define CFG_MAX_NAND_DEVICE		1
+
+#define SECTORSIZE		512
+#define ADDR_COLUMN		1
+#define ADDR_PAGE		2
+#define ADDR_COLUMN_PAGE	3
+#define NAND_ChipID_UNKNOWN 	0x00
+#define NAND_MAX_FLOORS		1
+#define NAND_MAX_CHIPS		1
+
+#define NAND_DISABLE_CE(nand) \
+	do { \
+		(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat) |=  0x0040; \
+	} while(0)
+
+#define NAND_ENABLE_CE(nand) \
+	do { \
+		(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat) &= ~0x0040; \
+	} while(0)
+
+#define NAND_CTL_CLRALE(nandptr) \
+	do { \
+		(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat) &= ~0x0100; \
+	} while(0)
+
+#define NAND_CTL_SETALE(nandptr) \
+	do { \
+		(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat) |=  0x0100; \
+	} while(0)
+
+#define NAND_CTL_CLRCLE(nandptr) \
+	do { \
+		(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat) &= ~0x0080; \
+	} while(0)
+
+#define NAND_CTL_SETCLE(nandptr) \
+	do { \
+		(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat) |=  0x0080; \
+	} while(0)
+
+#define NAND_WAIT_READY(nand) \
+	do { \
+		while ((((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pcdat & 0x100) == 0) \
+			; \
+	} while (0)
+
+#define WRITE_NAND_COMMAND(d, adr) \
+	do { \
+		*(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \
+	} while(0)
+
+#define WRITE_NAND_ADDRESS(d, adr) \
+	do { \
+		*(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \
+	} while(0)
+
+#define WRITE_NAND(d, adr) \
+	do { \
+		*(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \
+	} while(0)
+
+#define READ_NAND(adr) \
+	((unsigned char)(*(volatile unsigned char *)(unsigned long)(adr)))
+
+#endif
+
+/*****************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+#if defined(CONFIG_NETVIA_VERSION) && CONFIG_NETVIA_VERSION >= 2
+
+/* LEDs */
+
+/* last value written to the external register; we cannot read back */
+extern unsigned int last_er_val;
+
+/* led_id_t is unsigned long mask */
+typedef unsigned int led_id_t;
+
+static inline void __led_init(led_id_t mask, int state)
+{
+	unsigned int new_er_val;
+
+	if (state)
+		new_er_val = last_er_val & ~mask;
+	else
+		new_er_val = last_er_val |  mask;
+
+	*(volatile unsigned int *)ER_BASE = new_er_val;
+	last_er_val = new_er_val;
+}
+
+static inline void __led_toggle(led_id_t mask)
+{
+	unsigned int new_er_val;
+
+	new_er_val = last_er_val ^ mask;
+	*(volatile unsigned int *)ER_BASE = new_er_val;
+	last_er_val = new_er_val;
+}
+
+static inline void __led_set(led_id_t mask, int state)
+{
+	unsigned int new_er_val;
+
+	if (state)
+		new_er_val = last_er_val & ~mask;
+	else
+		new_er_val = last_er_val |  mask;
+
+	*(volatile unsigned int *)ER_BASE = new_er_val;
+	last_er_val = new_er_val;
+}
+
+/* MAX3100 console */
+#define MAX3100_SPI_RXD_PORT	(((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pbdat)
+#define MAX3100_SPI_RXD_BIT	0x00000008
+
+#define MAX3100_SPI_TXD_PORT	(((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pbdat)
+#define MAX3100_SPI_TXD_BIT	0x00000004
+
+#define MAX3100_SPI_CLK_PORT	(((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pbdat)
+#define MAX3100_SPI_CLK_BIT	0x00000002
+
+#define MAX3100_CS_PORT		(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat)
+#define MAX3100_CS_BIT		0x0010
+
+#endif
+
+#endif
+
+/****************************************************************/
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/csb226.h b/include/configs/csb226.h
index 2806b6dd0f..a257b82eb3 100644
--- a/include/configs/csb226.h
+++ b/include/configs/csb226.h
@@ -63,17 +63,17 @@
 #define CONFIG_BAUDRATE		19200
 #undef  CONFIG_MISC_INIT_R		/* not used yet                     */
 
-#define CONFIG_COMMANDS		(CONFIG_CMD_DFL & ~CFG_CMD_NET)
+#define CONFIG_COMMANDS (CFG_CMD_BDI|CFG_CMD_LOADB|CFG_CMD_IMI|CFG_CMD_FLASH|CFG_CMD_MEMORY|CFG_CMD_NET|CFG_CMD_ENV|CFG_CMD_RUN|CFG_CMD_ASKENV|CFG_CMD_ECHO|CFG_CMD_DHCP|CFG_CMD_CACHE)
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
 
 #define CONFIG_BOOTDELAY	3
-#define CONFIG_BOOTARGS		"console=ttyS0,19200 ip=dhcp root=/dev/nfs, ether=0,0x08000000,eth0"
+#define CONFIG_BOOTARGS		"console=ttyS0,19200 ip=192.168.1.10,192.168.1.5,,255,255,255,0,csb root=/dev/nfs, ether=0,0x08000000,eth0"
 #define CONFIG_ETHADDR		FF:FF:FF:FF:FF:FF
 #define CONFIG_NETMASK		255.255.255.0
 #define CONFIG_IPADDR		192.168.1.56
-#define CONFIG_SERVERIP		192.168.1.2
+#define CONFIG_SERVERIP		192.168.1.5
 #define CONFIG_BOOTCOMMAND	"bootm 0x40000"
 #define CONFIG_SHOW_BOOT_PROGRESS
 
@@ -126,6 +126,13 @@
 #define CFG_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 
 /*
+ * Network chip
+ */
+#define CONFIG_DRIVER_CS8900	1
+#define CS8900_BUS32		1
+#define CS8900_BASE		0x08000000
+
+/*
  * Stack sizes
  *
  * The stack sizes are set up in start.S using the settings below
@@ -151,25 +158,276 @@
 
 #define CFG_FLASH_BASE          PHYS_FLASH_1
 
+# if 0
+/* FIXME: switch to _documented_ registers */
 /*
  * GPIO settings
+ *
+ * GP15 == nCS1      is 1
+ * GP24 == SFRM      is 1
+ * GP25 == TXD       is 1
+ * GP33 == nCS5      is 1
+ * GP39 == FFTXD     is 1
+ * GP41 == RTS       is 1
+ * GP47 == TXD       is 1
+ * GP49 == nPWE      is 1
+ * GP62 == LED_B     is 1
+ * GP63 == TDM_OE    is 1
+ * GP78 == nCS2      is 1
+ * GP79 == nCS3      is 1
+ * GP80 == nCS4      is 1
+ */
+#define CFG_GPSR0_VAL       0x03008000
+#define CFG_GPSR1_VAL       0xC0028282
+#define CFG_GPSR2_VAL       0x0001C000
+
+/* GP02 == DON_RST   is 0
+ * GP23 == SCLK      is 0
+ * GP45 == USB_ACT   is 0
+ * GP60 == PLLEN     is 0
+ * GP61 == LED_A     is 0
+ * GP73 == SWUPD_LED is 0
+ */
+#define CFG_GPCR0_VAL       0x00800004
+#define CFG_GPCR1_VAL       0x30002000
+#define CFG_GPCR2_VAL       0x00000100
+
+/* GP00 == DON_READY is input
+ * GP01 == DON_OK    is input
+ * GP02 == DON_RST   is output
+ * GP03 == RESET_IND is input
+ * GP07 == RES11     is input
+ * GP09 == RES12     is input
+ * GP11 == SWUPDATE  is input
+ * GP14 == nPOWEROK  is input
+ * GP15 == nCS1      is output
+ * GP17 == RES22     is input
+ * GP18 == RDY       is input
+ * GP23 == SCLK      is output
+ * GP24 == SFRM      is output
+ * GP25 == TXD       is output
+ * GP26 == RXD       is input
+ * GP32 == RES21     is input
+ * GP33 == nCS5      is output
+ * GP34 == FFRXD     is input
+ * GP35 == CTS       is input
+ * GP39 == FFTXD     is output
+ * GP41 == RTS       is output
+ * GP42 == USB_OK    is input
+ * GP45 == USB_ACT   is output
+ * GP46 == RXD       is input
+ * GP47 == TXD       is output
+ * GP49 == nPWE      is output
+ * GP58 == nCPUBUSINT is input
+ * GP59 == LANINT    is input
+ * GP60 == PLLEN     is output
+ * GP61 == LED_A     is output
+ * GP62 == LED_B     is output
+ * GP63 == TDM_OE    is output
+ * GP64 == nDSPINT   is input
+ * GP65 == STRAP0    is input
+ * GP67 == STRAP1    is input
+ * GP69 == STRAP2    is input
+ * GP70 == STRAP3    is input
+ * GP71 == STRAP4    is input
+ * GP73 == SWUPD_LED is output
+ * GP78 == nCS2      is output
+ * GP79 == nCS3      is output
+ * GP80 == nCS4      is output
+ */
+#define CFG_GPDR0_VAL       0x03808004
+#define CFG_GPDR1_VAL       0xF002A282
+#define CFG_GPDR2_VAL       0x0001C200
+
+/* GP15 == nCS1  is AF10
+ * GP18 == RDY   is AF01
+ * GP23 == SCLK  is AF10
+ * GP24 == SFRM  is AF10
+ * GP25 == TXD   is AF10
+ * GP26 == RXD   is AF01
+ * GP33 == nCS5  is AF10
+ * GP34 == FFRXD is AF01
+ * GP35 == CTS   is AF01
+ * GP39 == FFTXD is AF10
+ * GP41 == RTS   is AF10
+ * GP46 == RXD   is AF10
+ * GP47 == TXD   is AF01
+ * GP49 == nPWE  is AF10
+ * GP78 == nCS2  is AF10
+ * GP79 == nCS3  is AF10
+ * GP80 == nCS4  is AF10
  */
-#define CFG_GPSR0_VAL       0xFFFFFFFF
-#define CFG_GPSR1_VAL       0xFFFFFFFF
-#define CFG_GPSR2_VAL       0xFFFFFFFF
-#define CFG_GPCR0_VAL       0x08022080
-#define CFG_GPCR1_VAL       0x00000000
-#define CFG_GPCR2_VAL       0x00000000
-#define CFG_GPDR0_VAL       0xCD82A878
-#define CFG_GPDR1_VAL       0xFCFFAB80
-#define CFG_GPDR2_VAL       0x0001FFFF
 #define CFG_GAFR0_L_VAL     0x80000000
-#define CFG_GAFR0_U_VAL     0xA5254010
-#define CFG_GAFR1_L_VAL     0x599A9550
-#define CFG_GAFR1_U_VAL     0xAAA5AAAA
-#define CFG_GAFR2_L_VAL     0xAAAAAAAA
+#define CFG_GAFR0_U_VAL     0x001A8010
+#define CFG_GAFR1_L_VAL     0x60088058
+#define CFG_GAFR1_U_VAL     0x00000008
+#define CFG_GAFR2_L_VAL     0xA0000000
 #define CFG_GAFR2_U_VAL     0x00000002
 
+
+/* FIXME: set GPIO_RER/FER */
+
+/* RDH = 1
+ * PH  = 1
+ * VFS = 1
+ * BFS = 1
+ * SSS = 1
+ */
+#define CFG_PSSR_VAL		0x37
+
+/*
+ * Memory settings
+ *
+ * This is the configuration for nCS0/1 -> flash banks
+ * configuration for nCS1:
+ * [31]    0    - Slower Device
+ * [30:28] 010  - CS deselect to CS time: 2*(2*MemClk) = 40 ns
+ * [27:24] 0101 - Address to data valid in bursts: (5+1)*MemClk = 60 ns
+ * [23:20] 1011 - " for first access: (11+2)*MemClk = 130 ns
+ * [19]    1    - 16 Bit bus width
+ * [18:16] 000  - nonburst RAM or FLASH
+ * configuration for nCS0:
+ * [15]    0    - Slower Device
+ * [14:12] 010  - CS deselect to CS time: 2*(2*MemClk) = 40 ns
+ * [11:08] 0101 - Address to data valid in bursts: (5+1)*MemClk = 60 ns
+ * [07:04] 1011 - " for first access: (11+2)*MemClk = 130 ns
+ * [03]    1    - 16 Bit bus width
+ * [02:00] 000  - nonburst RAM or FLASH
+ */
+#define CFG_MSC0_VAL		0x25b825b8 /* flash banks                   */
+
+/* This is the configuration for nCS2/3 -> TDM-Switch, DSP
+ * configuration for nCS3: DSP
+ * [31]    0    - Slower Device
+ * [30:28] 001  - RRR3: CS deselect to CS time: 1*(2*MemClk) = 20 ns
+ * [27:24] 0010 - RDN3: Address to data valid in bursts: (2+1)*MemClk = 30 ns
+ * [23:20] 0011 - RDF3: Address for first access: (3+1)*MemClk = 40 ns
+ * [19]    1    - 16 Bit bus width
+ * [18:16] 100  - variable latency I/O
+ * configuration for nCS2: TDM-Switch
+ * [15]    0    - Slower Device
+ * [14:12] 101  - RRR2: CS deselect to CS time: 5*(2*MemClk) = 100 ns
+ * [11:08] 1001 - RDN2: Address to data valid in bursts: (9+1)*MemClk = 100 ns
+ * [07:04] 0011 - RDF2: Address for first access: (3+1)*MemClk = 40 ns
+ * [03]    1    - 16 Bit bus width
+ * [02:00] 100  - variable latency I/O
+ */
+#define CFG_MSC1_VAL		0x123C593C /* TDM switch, DSP               */
+
+/* This is the configuration for nCS4/5 -> ExtBus, LAN Controller
+ *
+ * configuration for nCS5: LAN Controller
+ * [31]    0    - Slower Device
+ * [30:28] 001  - RRR5: CS deselect to CS time: 1*(2*MemClk) = 20 ns
+ * [27:24] 0010 - RDN5: Address to data valid in bursts: (2+1)*MemClk = 30 ns
+ * [23:20] 0011 - RDF5: Address for first access: (3+1)*MemClk = 40 ns
+ * [19]    1    - 16 Bit bus width
+ * [18:16] 100  - variable latency I/O
+ * configuration for nCS4: ExtBus
+ * [15]    0    - Slower Device
+ * [14:12] 110  - RRR4: CS deselect to CS time: 6*(2*MemClk) = 120 ns
+ * [11:08] 1100 - RDN4: Address to data valid in bursts: (12+1)*MemClk = 130 ns
+ * [07:04] 1101 - RDF4: Address for first access: 13->(15+1)*MemClk = 160 ns
+ * [03]    1    - 16 Bit bus width
+ * [02:00] 100  - variable latency I/O
+ */
+#define CFG_MSC2_VAL		0x123C6CDC /* extra bus, LAN controller     */
+
+/* MDCNFG: SDRAM Configuration Register
+ *
+ * [31:29]   000 - reserved
+ * [28]      0	 - no SA1111 compatiblity mode
+ * [27]      0   - latch return data with return clock
+ * [26]      0   - alternate addressing for pair 2/3
+ * [25:24]   00  - timings
+ * [23]      0   - internal banks in lower partition 2/3 (not used)
+ * [22:21]   00  - row address bits for partition 2/3 (not used)
+ * [20:19]   00  - column address bits for partition 2/3 (not used)
+ * [18]      0   - SDRAM partition 2/3 width is 32 bit
+ * [17]      0   - SDRAM partition 3 disabled
+ * [16]      0   - SDRAM partition 2 disabled
+ * [15:13]   000 - reserved
+ * [12]      1	 - SA1111 compatiblity mode
+ * [11]      1   - latch return data with return clock
+ * [10]      0   - no alternate addressing for pair 0/1
+ * [09:08]   01  - tRP=2*MemClk CL=2 tRCD=2*MemClk tRAS=5*MemClk tRC=8*MemClk
+ * [7]       1   - 4 internal banks in lower partition pair
+ * [06:05]   10  - 13 row address bits for partition 0/1
+ * [04:03]   01  - 9 column address bits for partition 0/1
+ * [02]      0   - SDRAM partition 0/1 width is 32 bit
+ * [01]      0   - disable SDRAM partition 1
+ * [00]      1   - enable  SDRAM partition 0
+ */
+/* use the configuration above but disable partition 0 */
+#define CFG_MDCNFG_VAL		0x000019c8
+
+/* MDREFR: SDRAM Refresh Control Register
+ *
+ * [32:26] 0     - reserved
+ * [25]    0     - K2FREE: not free running
+ * [24]    0     - K1FREE: not free running
+ * [23]    1     - K0FREE: not free running
+ * [22]    0     - SLFRSH: self refresh disabled
+ * [21]    0     - reserved
+ * [20]    0     - APD: no auto power down
+ * [19]    0     - K2DB2: SDCLK2 is MemClk
+ * [18]    0     - K2RUN: disable SDCLK2
+ * [17]    0     - K1DB2: SDCLK1 is MemClk
+ * [16]    1     - K1RUN: enable SDCLK1
+ * [15]    1     - E1PIN: SDRAM clock enable
+ * [14]    1     - K0DB2: SDCLK0 is MemClk
+ * [13]    0     - K0RUN: disable SDCLK0
+ * [12]    1     - E0PIN: disable SDCKE0
+ * [11:00] 000000011000 - (64ms/8192)*MemClkFreq/32 = 24
+ */
+#define CFG_MDREFR_VAL		0x0081D018
+
+/* MDMRS: Mode Register Set Configuration Register
+ *
+ * [31]      0       - reserved
+ * [30:23]   00000000- MDMRS2: SDRAM2/3 MRS Value. (not used)
+ * [22:20]   000     - MDCL2:  SDRAM2/3 Cas Latency.  (not used)
+ * [19]      0       - MDADD2: SDRAM2/3 burst Type. Fixed to sequential.  (not used)
+ * [18:16]   010     - MDBL2:  SDRAM2/3 burst Length. Fixed to 4.  (not used)
+ * [15]      0       - reserved
+ * [14:07]   00000000- MDMRS0: SDRAM0/1 MRS Value.
+ * [06:04]   010     - MDCL0:  SDRAM0/1 Cas Latency.
+ * [03]      0       - MDADD0: SDRAM0/1 burst Type. Fixed to sequential.
+ * [02:00]   010     - MDBL0:  SDRAM0/1 burst Length. Fixed to 4.
+ */
+#define CFG_MDMRS_VAL		0x00020022
+
+/*
+ * PCMCIA and CF Interfaces
+ */
+#define CFG_MECR_VAL		0x00000000
+#define CFG_MCMEM0_VAL		0x00000000
+#define CFG_MCMEM1_VAL		0x00000000
+#define CFG_MCATT0_VAL		0x00000000
+#define CFG_MCATT1_VAL		0x00000000
+#define CFG_MCIO0_VAL		0x00000000
+#define CFG_MCIO1_VAL		0x00000000
+#endif
+
+/*
+ * GPIO settings
+ */
+#define CFG_GPSR0_VAL		0xFFFFFFFF
+#define CFG_GPSR1_VAL		0xFFFFFFFF
+#define CFG_GPSR2_VAL		0xFFFFFFFF
+#define CFG_GPCR0_VAL		0x08022080
+#define CFG_GPCR1_VAL		0x00000000
+#define CFG_GPCR2_VAL		0x00000000
+#define CFG_GPDR0_VAL		0xCD82A878
+#define CFG_GPDR1_VAL		0xFCFFAB80
+#define CFG_GPDR2_VAL		0x0001FFFF
+#define CFG_GAFR0_L_VAL		0x80000000
+#define CFG_GAFR0_U_VAL		0xA5254010
+#define CFG_GAFR1_L_VAL		0x599A9550
+#define CFG_GAFR1_U_VAL		0xAAA5AAAA
+#define CFG_GAFR2_L_VAL		0xAAAAAAAA
+#define CFG_GAFR2_U_VAL		0x00000002
+
 /* FIXME: set GPIO_RER/FER */
 
 #define CFG_PSSR_VAL        0x20
@@ -177,12 +435,13 @@
 /*
  * Memory settings
  */
-#define CFG_MSC0_VAL        0x2EF025D0
-#define CFG_MSC1_VAL        0x00003F64
-#define CFG_MSC2_VAL        0x00000000
-#define CFG_MDCNFG_VAL      0x09a909a9
-#define CFG_MDREFR_VAL      0x03ca0030
-#define CFG_MDMRS_VAL       0x00220022
+
+#define CFG_MSC0_VAL            0x2ef15af0
+#define CFG_MSC1_VAL            0x00003ff4
+#define CFG_MSC2_VAL            0x7ff07ff0
+#define CFG_MDCNFG_VAL          0x09a909a9
+#define CFG_MDREFR_VAL          0x038ff030
+#define CFG_MDMRS_VAL           0x00220022
 
 /*
  * PCMCIA and CF Interfaces
diff --git a/include/configs/innokom.h b/include/configs/innokom.h
index 312c854b67..60699fec45 100644
--- a/include/configs/innokom.h
+++ b/include/configs/innokom.h
@@ -30,8 +30,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define DEBUG 1
-
 /*
  * If we are developing, we might want to start U-Boot from ram
  * so we MUST NOT initialize critical regs like mem-timing ...
@@ -62,7 +60,7 @@
 #define CONFIG_BAUDRATE		19200
 #define CONFIG_MISC_INIT_R	1	/* we have a misc_init_r() function */
 
-#define CONFIG_COMMANDS (CFG_CMD_BDI|CFG_CMD_LOADB|CFG_CMD_IMI|CFG_CMD_FLASH|CFG_CMD_MEMORY|CFG_CMD_NET|CFG_CMD_ENV|CFG_CMD_RUN|CFG_CMD_ASKENV|CFG_CMD_ECHO|CFG_CMD_I2C|CFG_CMD_DHCP)
+#define CONFIG_COMMANDS (CFG_CMD_BDI|CFG_CMD_LOADB|CFG_CMD_IMI|CFG_CMD_FLASH|CFG_CMD_MEMORY|CFG_CMD_NET|CFG_CMD_ENV|CFG_CMD_RUN|CFG_CMD_ASKENV|CFG_CMD_ECHO|CFG_CMD_I2C|CFG_CMD_DHCP|CFG_CMD_CACHE)
 /* CONFIG_CMD_DFL|CFG_CMD_I2C|CFG_CMD_EEPROM|CFG_CMD_NET|CFG_CMD_JFFS2|CFG_CMD_DHCP) */
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any)   */
 #include <cmd_confdefs.h>
diff --git a/include/configs/logodl.h b/include/configs/logodl.h
index c018b6b646..cb737fc2da 100644
--- a/include/configs/logodl.h
+++ b/include/configs/logodl.h
@@ -58,8 +58,7 @@
 #define CONFIG_ENV_OVERWRITE
 
 #define CONFIG_BAUDRATE		19200
-/*#define CONFIG_MISC_INIT_R	1	/ * we have a misc_init_r() function */
-#undef CONFIG_MISC_INIT_R		/* FIXME                            */
+#undef CONFIG_MISC_INIT_R		/* FIXME: misc_init_r() missing     */
 
 #define CONFIG_COMMANDS (CFG_CMD_FLASH|CFG_CMD_MEMORY|CFG_CMD_ENV|CFG_CMD_RUN|CFG_CMD_ASKENV|CFG_CMD_ECHO)
 /* CONFIG_CMD_DFL|CFG_CMD_I2C|CFG_CMD_EEPROM|CFG_CMD_NET|CFG_CMD_JFFS2|CFG_CMD_DHCP) */
@@ -120,12 +119,14 @@
 /*
  * SMSC91C111 Network Card
  */
-/*#define CONFIG_DRIVER_SMC91111		1	*/
-/*#define CONFIG_SMC91111_BASE		0x10000000 / * chip select 4         */
-/*#undef  CONFIG_SMC_USE_32_BIT		           / * 16 bit bus access     */
-/*#undef  CONFIG_SMC_91111_EXT_PHY		   / * we use internal phy   */
-/*#undef  CONFIG_SHOW_ACTIVITY	*/
-/*#define CONFIG_NET_RETRY_COUNT		10	   / * # of retries          */
+#if 0
+#define CONFIG_DRIVER_SMC91111		1
+#define CONFIG_SMC91111_BASE		0x10000000 /* chip select 4         */
+#undef  CONFIG_SMC_USE_32_BIT		           /* 16 bit bus access     */
+#undef  CONFIG_SMC_91111_EXT_PHY		   /* we use internal phy   */
+#undef  CONFIG_SHOW_ACTIVITY
+#define CONFIG_NET_RETRY_COUNT		10	   /* # of retries          */
+#endif
 
 /*
  * Stack sizes
diff --git a/include/status_led.h b/include/status_led.h
index 5a33e31e93..e8ba9fd42d 100644
--- a/include/status_led.h
+++ b/include/status_led.h
@@ -236,6 +236,8 @@ void status_led_set  (int led, int state);
 /*****  NetVia   ********************************************************/
 #elif defined(CONFIG_NETVIA)
 
+#if !defined(CONFIG_NETVIA_VERSION) || CONFIG_NETVIA_VERSION == 1
+
 #define STATUS_LED_PAR		im_ioport.iop_pdpar
 #define STATUS_LED_DIR		im_ioport.iop_pddir
 #undef  STATUS_LED_ODR
@@ -252,6 +254,7 @@ void status_led_set  (int led, int state);
 # define STATUS_LED_ACTIVE	0		/* LED on for bit == 0	*/
 # define STATUS_LED_BOOT	0		/* LED 0 used for boot status */
 
+#endif
 
 /*****  CMI   ********************************************************/
 #elif defined(CONFIG_CMI)
diff --git a/include/version.h b/include/version.h
index 8876686aa1..3f228c8b81 100644
--- a/include/version.h
+++ b/include/version.h
@@ -24,6 +24,6 @@
 #ifndef	__VERSION_H__
 #define	__VERSION_H__
 
-#define	U_BOOT_VERSION	"U-Boot 0.3.2"
+#define	U_BOOT_VERSION	"U-Boot 0.4.0"
 
 #endif	/* __VERSION_H__ */