Merge branch 'mpc85xx'

Conflicts:

	include/ft_build.h
	include/pci.h

Resolved, though.

8 files changed, 132 insertions, 56 deletions

diff --git a/include/asm-ppc/immap_85xx.h b/include/asm-ppc/immap_85xx.h
index 2f10e9591d..7a4345a740 100644
--- a/include/asm-ppc/immap_85xx.h
+++ b/include/asm-ppc/immap_85xx.h
@@ -246,7 +246,6 @@ typedef struct ccsr_lbc {
 
 /*
  * PCI Registers(0x8000-0x9000)
- * Omitting Reserved(0x9000-0x2_0000)
  */
 typedef struct ccsr_pcix {
 	uint	cfg_addr;	/* 0x8000 - PCIX Configuration Address Register */
@@ -309,9 +308,27 @@ typedef struct ccsr_pcix {
 	uint	peextaddrcr;	/* 0x8e14 - PCIX  Error Extended Address Capture Register */
 	uint	pedlcr;		/* 0x8e18 - PCIX Error Data Low Capture Register */
 	uint	pedhcr;		/* 0x8e1c - PCIX Error Error Data High Capture Register */
-	char	res11[94688];
+	uint	gas_timr;	/* 0x8e20 - PCIX Gasket Timer Register */
+	char	res11[476];
 } ccsr_pcix_t;
 
+#define PCIX_COMMAND	0x62
+#define POWAR_EN	0x80000000
+#define POWAR_IO_READ	0x00080000
+#define POWAR_MEM_READ	0x00040000
+#define POWAR_IO_WRITE	0x00008000
+#define POWAR_MEM_WRITE	0x00004000
+#define POWAR_MEM_512M	0x0000001c
+#define POWAR_IO_1M	0x00000013
+
+#define PIWAR_EN	0x80000000
+#define PIWAR_PF	0x20000000
+#define PIWAR_LOCAL	0x00f00000
+#define PIWAR_READ_SNOOP	0x00050000
+#define PIWAR_WRITE_SNOOP	0x00005000
+#define PIWAR_MEM_2G		0x0000001e
+
+
 /*
  * L2 Cache Registers(0x2_0000-0x2_1000)
  */
@@ -1572,6 +1589,8 @@ typedef struct ccsr_gur {
 	char	res15[61651];
 } ccsr_gur_t;
 
+#define PORDEVSR_PCI	(0x00800000)	/* PCI Mode */
+
 typedef struct immap {
 	ccsr_local_ecm_t	im_local_ecm;
 	ccsr_ddr_t		im_ddr;
@@ -1579,6 +1598,8 @@ typedef struct immap {
 	ccsr_duart_t		im_duart;
 	ccsr_lbc_t		im_lbc;
 	ccsr_pcix_t		im_pcix;
+	ccsr_pcix_t		im_pcix2;
+	char			reserved[90112];
 	ccsr_l2cache_t		im_l2cache;
 	ccsr_dma_t		im_dma;
 	ccsr_tsec_t		im_tsec1;
diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index 131c832242..8e4d2c95a4 100644
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -68,6 +68,10 @@
  * The board, however, can run at 66MHz.  In any event, this value
  * must match the settings of some switches.  Details can be found
  * in the README.mpc85xxads.
+ *
+ * XXX -- Can't we run at 66 MHz, anyway?  PCI should drop to
+ * 33MHz to accommodate, based on a PCI pin.
+ * Note that PCI-X won't work at 33MHz.
  */
 
 #ifndef CONFIG_SYS_CLK_FREQ
@@ -293,6 +297,21 @@
 #define CFG_PROMPT_HUSH_PS2 "> "
 #endif
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_FLAT_TREE	1
+#define CONFIG_OF_BOARD_SETUP	1
+
+/* maximum size of the flat tree (8K) */
+#define OF_FLAT_TREE_MAX_SIZE	8192
+
+#define OF_CPU			"PowerPC,8540@0"
+#define OF_SOC			"soc8540@e0000000"
+#define OF_TBCLK		(bd->bi_busfreq / 8)
+#define OF_STDOUT_PATH		"/soc8540@e0000000/serial@4500"
+
+#define CFG_64BIT_VSPRINTF	1
+#define CFG_64BIT_STRTOUL	1
+
 /* I2C */
 #define  CONFIG_HARD_I2C		/* I2C with hardware support*/
 #undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
@@ -312,9 +331,10 @@
 #define CFG_PCI1_MEM_BASE	0x80000000
 #define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
 #define CFG_PCI1_MEM_SIZE	0x20000000	/* 512M */
-#define CFG_PCI1_IO_BASE	0xe2000000
-#define CFG_PCI1_IO_PHYS	CFG_PCI1_IO_BASE
-#define CFG_PCI1_IO_SIZE	0x1000000	/* 16M */
+
+#define CFG_PCI1_IO_BASE	0x0
+#define CFG_PCI1_IO_PHYS	0xe2000000
+#define CFG_PCI1_IO_SIZE	0x100000	/* 1M */
 
 #if defined(CONFIG_PCI)
 
diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h
index c96b98b54d..f73caf0319 100644
--- a/include/configs/MPC8541CDS.h
+++ b/include/configs/MPC8541CDS.h
@@ -308,6 +308,18 @@ extern unsigned long get_clock_freq(void);
 #define CFG_PROMPT_HUSH_PS2 "> "
 #endif
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_FLAT_TREE	1
+#define CONFIG_OF_BOARD_SETUP	1
+
+/* maximum size of the flat tree (8K) */
+#define OF_FLAT_TREE_MAX_SIZE	8192
+
+#define OF_CPU			"PowerPC,8541@0"
+#define OF_SOC			"soc8541@e0000000"
+#define OF_TBCLK		(bd->bi_busfreq / 8)
+#define OF_STDOUT_PATH		"/soc8541@e0000000/serial@4600"
+
 /* I2C */
 #define CONFIG_HARD_I2C			/* I2C with hardware support */
 #undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
@@ -323,32 +335,27 @@ extern unsigned long get_clock_freq(void);
 #define CFG_PCI1_MEM_BASE	0x80000000
 #define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
 #define CFG_PCI1_MEM_SIZE	0x20000000	/* 512M */
-#define CFG_PCI1_IO_BASE	0xe2000000
-#define CFG_PCI1_IO_PHYS	CFG_PCI1_IO_BASE
-#define CFG_PCI1_IO_SIZE	0x1000000	/* 16M */
+#define CFG_PCI1_IO_BASE	0x00000000
+#define CFG_PCI1_IO_PHYS	0xe2000000
+#define CFG_PCI1_IO_SIZE	0x100000	/* 1M */
 
 #define CFG_PCI2_MEM_BASE	0xa0000000
 #define CFG_PCI2_MEM_PHYS	CFG_PCI2_MEM_BASE
 #define CFG_PCI2_MEM_SIZE	0x20000000	/* 512M */
-#define CFG_PCI2_IO_BASE	0xe3000000
-#define CFG_PCI2_IO_PHYS	CFG_PCI2_IO_BASE
-#define CFG_PCI2_IO_SIZE	0x1000000	/* 16M */
+#define CFG_PCI2_IO_BASE	0x00000000
+#define CFG_PCI2_IO_PHYS	0xe2100000
+#define CFG_PCI2_IO_SIZE	0x100000	/* 1M */
 
 
 #if defined(CONFIG_PCI)
 
+#define CONFIG_MPC85XX_PCI2
 #define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP	               	/* do pci plug-and-play */
 
 #undef CONFIG_EEPRO100
 #undef CONFIG_TULIP
 
-#if !defined(CONFIG_PCI_PNP)
-    #define PCI_ENET0_IOADDR      0xe0000000
-    #define PCI_ENET0_MEMADDR     0xe0000000
-    #define PCI_IDSEL_NUMBER      0x0c 	/*slot0->3(IDSEL)=12->15*/
-#endif
-
 #undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
 #define CFG_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
 
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index 4ca8bc35db..37b518cca5 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -314,6 +314,18 @@ extern unsigned long get_clock_freq(void);
 #define CFG_PROMPT_HUSH_PS2 "> "
 #endif
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_FLAT_TREE	1
+#define CONFIG_OF_BOARD_SETUP	1
+
+/* maximum size of the flat tree (8K) */
+#define OF_FLAT_TREE_MAX_SIZE	8192
+
+#define OF_CPU			"PowerPC,8548@0"
+#define OF_SOC			"soc8548@e0000000"
+#define OF_TBCLK		(bd->bi_busfreq / 8)
+#define OF_STDOUT_PATH		"/soc8548@e0000000/serial@4600"
+
 /* I2C */
 #define CONFIG_HARD_I2C			/* I2C with hardware support */
 #undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
@@ -329,32 +341,27 @@ extern unsigned long get_clock_freq(void);
 #define CFG_PCI1_MEM_BASE	0x80000000
 #define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
 #define CFG_PCI1_MEM_SIZE	0x20000000	/* 512M */
-#define CFG_PCI1_IO_BASE	0xe2000000
-#define CFG_PCI1_IO_PHYS	CFG_PCI1_IO_BASE
-#define CFG_PCI1_IO_SIZE	0x1000000	/* 16M */
+#define CFG_PCI1_IO_BASE	0x00000000
+#define CFG_PCI1_IO_PHYS	0xe2000000
+#define CFG_PCI1_IO_SIZE	0x00100000	/* 1M */
 
 #define CFG_PCI2_MEM_BASE	0xa0000000
 #define CFG_PCI2_MEM_PHYS	CFG_PCI2_MEM_BASE
 #define CFG_PCI2_MEM_SIZE	0x20000000	/* 512M */
-#define CFG_PCI2_IO_BASE	0xe3000000
-#define CFG_PCI2_IO_PHYS	CFG_PCI2_IO_BASE
-#define CFG_PCI2_IO_SIZE	0x1000000	/* 16M */
+#define CFG_PCI2_IO_BASE	0x00000000
+#define CFG_PCI2_IO_PHYS	0xe2100000
+#define CFG_PCI2_IO_SIZE	0x00100000	/* 1M */
 
 
 #if defined(CONFIG_PCI)
 
 #define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP	               	/* do pci plug-and-play */
+#define CONFIG_85XX_PCI2
 
 #undef CONFIG_EEPRO100
 #undef CONFIG_TULIP
 
-#if !defined(CONFIG_PCI_PNP)
-    #define PCI_ENET0_IOADDR      0xe0000000
-    #define PCI_ENET0_MEMADDR     0xe0000000
-    #define PCI_IDSEL_NUMBER      0x0c 	/*slot0->3(IDSEL)=12->15*/
-#endif
-
 #undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
 #define CFG_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
 
@@ -374,7 +381,7 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_MPC85XX_TSEC2_NAME	"eTSEC1"
 #define CONFIG_MPC85XX_TSEC3	1
 #define CONFIG_MPC85XX_TSEC3_NAME	"eTSEC2"
-#define CONFIG_MPC85XX_TSEC4	1
+#undef CONFIG_MPC85XX_TSEC4
 #define CONFIG_MPC85XX_TSEC4_NAME	"eTSEC3"
 #undef CONFIG_MPC85XX_FEC
 
diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h
index a44e3ec845..b94e38ae34 100644
--- a/include/configs/MPC8555CDS.h
+++ b/include/configs/MPC8555CDS.h
@@ -308,6 +308,18 @@ extern unsigned long get_clock_freq(void);
 #define CFG_PROMPT_HUSH_PS2 "> "
 #endif
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_FLAT_TREE	1
+#define CONFIG_OF_BOARD_SETUP	1
+
+/* maximum size of the flat tree (8K) */
+#define OF_FLAT_TREE_MAX_SIZE	8192
+
+#define OF_CPU			"PowerPC,8555@0"
+#define OF_SOC			"soc8555@e0000000"
+#define OF_TBCLK		(bd->bi_busfreq / 8)
+#define OF_STDOUT_PATH		"/soc8555@e0000000/serial@4600"
+
 /* I2C */
 #define CONFIG_HARD_I2C			/* I2C with hardware support */
 #undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
@@ -323,33 +335,28 @@ extern unsigned long get_clock_freq(void);
 #define CFG_PCI1_MEM_BASE	0x80000000
 #define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
 #define CFG_PCI1_MEM_SIZE	0x20000000	/* 512M */
-#define CFG_PCI1_IO_BASE	0xe2000000
-#define CFG_PCI1_IO_PHYS	CFG_PCI1_IO_BASE
-#define CFG_PCI1_IO_SIZE	0x1000000	/* 16M */
+#define CFG_PCI1_IO_BASE	0x00000000
+#define CFG_PCI1_IO_PHYS	0xe2000000
+#define CFG_PCI1_IO_SIZE	0x00100000	/* 1M */
 
 #define CFG_PCI2_MEM_BASE	0xa0000000
 #define CFG_PCI2_MEM_PHYS	CFG_PCI2_MEM_BASE
 #define CFG_PCI2_MEM_SIZE	0x20000000	/* 512M */
-#define CFG_PCI2_IO_BASE	0xe3000000
-#define CFG_PCI2_IO_PHYS	CFG_PCI2_IO_BASE
-#define CFG_PCI2_IO_SIZE	0x1000000	/* 16M */
+#define CFG_PCI2_IO_BASE	0x00000000
+#define CFG_PCI2_IO_PHYS	0xe2100000
+#define CFG_PCI2_IO_SIZE	0x00100000	/* 1M */
 
 
 #if defined(CONFIG_PCI)
 
 #define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP	               	/* do pci plug-and-play */
+#define CONFIG_MPC85XX_PCI2
 
 #undef CONFIG_EEPRO100
 #undef CONFIG_TULIP
 
-#if !defined(CONFIG_PCI_PNP)
-    #define PCI_ENET0_IOADDR      0xe0000000
-    #define PCI_ENET0_MEMADDR     0xe0000000
-    #define PCI_IDSEL_NUMBER      0x0c 	/*slot0->3(IDSEL)=12->15*/
-#endif
-
-#undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
+#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
 #define CFG_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
 
 #endif	/* CONFIG_PCI */
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index 2d5031b77d..1c684f2fd1 100644
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -290,6 +290,18 @@
 #define CFG_PROMPT_HUSH_PS2 "> "
 #endif
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_FLAT_TREE	1
+#define CONFIG_OF_BOARD_SETUP	1
+
+/* maximum size of the flat tree (8K) */
+#define OF_FLAT_TREE_MAX_SIZE	8192
+
+#define OF_CPU			"PowerPC,8560@0"
+#define OF_SOC			"soc8560@e0000000"
+#define OF_TBCLK		(bd->bi_busfreq / 8)
+#define OF_STDOUT_PATH		"/soc8560@e0000000/serial@4500"
+
 /* I2C */
 #define  CONFIG_HARD_I2C		/* I2C with hardware support*/
 #undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
diff --git a/include/ft_build.h b/include/ft_build.h
index 5c5e06309b..f5156879de 100644
--- a/include/ft_build.h
+++ b/include/ft_build.h
@@ -36,19 +36,18 @@ struct boot_param_header {
 
 struct ft_cxt {
 	struct boot_param_header *bph;
-	int max_size;		/* maximum size of tree */
-	int overflow;		/* set when this happens */
-	u8 *p, *pstr, *pres;	/* running pointers */
-	u8 *p_begin, *pstr_begin, *pres_begin;	/* starting pointers */
-	u8 *p_anchor;		/* start of constructed area */
-	int struct_size, strings_size, res_size;
+	u8 *p_rsvmap;
+	u8 *p_start;  /* pointer to beginning of dt_struct */
+	u8 *p_end; /* pointer to end of dt_strings */
+	u8 *p; /* pointer to end of dt_struct and beginning of dt_strings */
 };
 
 void ft_begin_node(struct ft_cxt *cxt, const char *name);
+void ft_init_cxt(struct ft_cxt *cxt, void *blob);
 void ft_end_node(struct ft_cxt *cxt);
 
-void ft_begin_tree(struct ft_cxt *cxt);
-int ft_end_tree(struct ft_cxt *cxt);
+void ft_end_tree(struct ft_cxt *cxt);
+void ft_finalize_tree(struct ft_cxt *cxt);
 
 void ft_nop(struct ft_cxt *cxt);
 void ft_prop(struct ft_cxt *cxt, const char *name, const void *data, int sz);
@@ -57,14 +56,14 @@ void ft_prop_int(struct ft_cxt *cxt, const char *name, int val);
 void ft_begin(struct ft_cxt *cxt, void *blob, int max_size);
 void ft_add_rsvmap(struct ft_cxt *cxt, u64 physaddr, u64 size);
 
-void ft_setup(void *blob, int size, bd_t * bd, ulong initrd_start, ulong initrd_end);
-#ifdef CONFIG_OF_BOARD_SETUP
-void ft_board_setup(void *blob, bd_t *bd);
-#endif
+void ft_setup(void *blob, bd_t * bd, ulong initrd_start, ulong initrd_end);
+
 void ft_dump_blob(const void *bphp);
 void ft_merge_blob(struct ft_cxt *cxt, void *blob);
 void *ft_get_prop(void *bphp, const char *propname, int *szp);
 
+#ifdef CONFIG_OF_BOARD_SETUP
 void ft_board_setup(void *blob, bd_t *bd);
+#endif
 
 #endif
diff --git a/include/pci.h b/include/pci.h
index 705d1fcd8a..e0e8783a7a 100644
--- a/include/pci.h
+++ b/include/pci.h
@@ -271,11 +271,14 @@
 #define PCI_AGP_SIZEOF		12
 
 /* PCI-X registers */
-#define  PCI_X_CMD_DPERR_E      0x0001  /* Data Parity Error Recovery Enable */+#define  PCI_X_CMD_ERO          0x0002  /* Enable Relaxed Ordering */
+
+#define  PCI_X_CMD_DPERR_E      0x0001  /* Data Parity Error Recovery Enable */
+#define  PCI_X_CMD_ERO          0x0002  /* Enable Relaxed Ordering */
 #define  PCI_X_CMD_MAX_READ     0x0000  /* Max Memory Read Byte Count */
 #define  PCI_X_CMD_MAX_SPLIT    0x0030  /* Max Outstanding Split Transactions */
 #define  PCI_X_CMD_VERSION(x)   (((x) >> 12) & 3) /* Version */
 
+
 /* Slot Identification */
 
 #define PCI_SID_ESR		2	/* Expansion Slot Register */