Merge branch 'master' of git://git.denx.de/u-boot-arm

23 files changed, 225 insertions, 1186 deletions

diff --git a/include/common.h b/include/common.h
index 08b294cfd9..033b5d946d 100644
--- a/include/common.h
+++ b/include/common.h
@@ -971,6 +971,22 @@ static inline phys_addr_t map_to_sysmem(const void *ptr)
 #define DIV_ROUND_UP(n,d)	(((n) + (d) - 1) / (d))
 #define roundup(x, y)		((((x) + ((y) - 1)) / (y)) * (y))
 
+/*
+ * Divide positive or negative dividend by positive divisor and round
+ * to closest integer. Result is undefined for negative divisors and
+ * for negative dividends if the divisor variable type is unsigned.
+ */
+#define DIV_ROUND_CLOSEST(x, divisor)(			\
+{							\
+	typeof(x) __x = x;				\
+	typeof(divisor) __d = divisor;			\
+	(((typeof(x))-1) > 0 ||				\
+	 ((typeof(divisor))-1) > 0 || (__x) > 0) ?	\
+		(((__x) + ((__d) / 2)) / (__d)) :	\
+		(((__x) - ((__d) / 2)) / (__d));	\
+}							\
+)
+
 #define ALIGN(x,a)		__ALIGN_MASK((x),(typeof(x))(a)-1)
 #define __ALIGN_MASK(x,mask)	(((x)+(mask))&~(mask))
 
diff --git a/include/configs/actux1.h b/include/configs/actux1.h
deleted file mode 100644
index 9b8bd78943..0000000000
--- a/include/configs/actux1.h
+++ /dev/null
@@ -1,226 +0,0 @@
-/*
- * (C) Copyright 2007
- * Michael Schwingen, michael@schwingen.org
- *
- * Configuration settings for the AcTux-1 board.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_IXP425			1
-#define CONFIG_ACTUX1			1
-
-#define	CONFIG_MACH_TYPE		1479
-
-#define CONFIG_DISPLAY_CPUINFO		1
-#define CONFIG_DISPLAY_BOARDINFO	1
-
-#define CONFIG_IXP_SERIAL
-#define CONFIG_SYS_IXP425_CONSOLE		IXP425_UART2
-#define CONFIG_BAUDRATE			115200
-#define CONFIG_BOOTDELAY		3
-#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
-#define CONFIG_BOARD_EARLY_INIT_F	1
-#define CONFIG_SYS_LDSCRIPT	"board/actux1/u-boot.lds"
-
-/***************************************************************
- * U-boot generic defines start here.
- ***************************************************************/
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN			(CONFIG_ENV_SIZE + 128*1024)
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-/* Command line configuration. */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ELF
-#ifdef CONFIG_PCI
-#define CONFIG_CMD_PCI
-#define CONFIG_PCI_PNP
-#define CONFIG_IXP_PCI
-#define CONFIG_PCI_SCAN_SHOW
-#define CONFIG_CMD_PCI_ENUM
-#endif
-
-#define CONFIG_BOOTCOMMAND		"run boot_flash"
-/* enable passing of ATAGs */
-#define CONFIG_CMDLINE_TAG		1
-#define CONFIG_SETUP_MEMORY_TAGS	1
-#define CONFIG_INITRD_TAG		1
-#define CONFIG_REVISION_TAG		1
-
-#if defined(CONFIG_CMD_KGDB)
-# define CONFIG_KGDB_BAUDRATE		230400
-#endif
-
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP
-/* Console I/O Buffer Size */
-#define CONFIG_SYS_CBSIZE			256
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-/* max number of command args */
-#define CONFIG_SYS_MAXARGS			16
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE			CONFIG_SYS_CBSIZE
-
-#define CONFIG_SYS_MEMTEST_START		0x00400000
-#define CONFIG_SYS_MEMTEST_END			0x00800000
-
-/* timer clock - 2* OSC_IN system clock */
-#define CONFIG_IXP425_TIMER_CLK                 66666666
-
-/* default load address */
-#define CONFIG_SYS_LOAD_ADDR			0x00010000
-
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE		{ 9600, 19200, 38400, 57600,	\
-					  115200, 230400 }
-#define CONFIG_SERIAL_RTS_ACTIVE	1
-
-/* Expansion bus settings */
-#define CONFIG_SYS_EXP_CS0			0xbd113842
-
-/* SDRAM settings */
-#define CONFIG_NR_DRAM_BANKS		1
-#define PHYS_SDRAM_1			0x00000000
-#define CONFIG_SYS_SDRAM_BASE			0x00000000
-
-#ifdef CONFIG_RAM_32MB
-# define CONFIG_SYS_SDR_CONFIG			0x18
-# define PHYS_SDRAM_1_SIZE		0x02000000
-# define CONFIG_SYS_SDRAM_REFRESH_CNT		0x81a
-# define CONFIG_SYS_SDR_MODE_CONFIG		0x1
-# define CONFIG_SYS_DRAM_SIZE			0x02000000
-#else /* 16MB SDRAM */
-# define CONFIG_SYS_SDR_CONFIG			0x3A
-# define PHYS_SDRAM_1_SIZE		0x01000000
-# define CONFIG_SYS_SDRAM_REFRESH_CNT		0x81a
-# define CONFIG_SYS_SDR_MODE_CONFIG		0x1
-# define CONFIG_SYS_DRAM_SIZE			0x01000000
-#endif
-
-/* FLASH organization */
-#define CONFIG_SYS_TEXT_BASE		0x50000000
-#ifdef CONFIG_FLASH2X2
-# define CONFIG_SYS_MAX_FLASH_BANKS		2
-/* max number of sectors on one chip */
-# define CONFIG_SYS_MAX_FLASH_SECT		40
-# define PHYS_FLASH_1			0x50000000
-# define PHYS_FLASH_2			0x50200000
-# define CONFIG_SYS_FLASH_BANKS_LIST		{ PHYS_FLASH_1, PHYS_FLASH_2 }
-#endif
-#ifdef CONFIG_FLASH1X8
-# define CONFIG_SYS_MAX_FLASH_BANKS		1
-/* max number of sectors on one chip */
-# define CONFIG_SYS_MAX_FLASH_SECT		140
-# define PHYS_FLASH_1			0x50000000
-# define CONFIG_SYS_FLASH_BANKS_LIST		{ PHYS_FLASH_1 }
-#endif
-
-#define CONFIG_SYS_FLASH_BASE			PHYS_FLASH_1
-#define CONFIG_SYS_MONITOR_BASE		PHYS_FLASH_1
-#define CONFIG_SYS_MONITOR_LEN			(256 << 10)
-#define CONFIG_BOARD_SIZE_LIMIT			262144
-
-/* Use common CFI driver */
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-/* no byte writes on IXP4xx */
-#define CONFIG_SYS_FLASH_CFI_WIDTH		FLASH_CFI_16BIT
-/* print 'E' for empty sector on flinfo */
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-
-/* Ethernet */
-
-/* include IXP4xx NPE support */
-#define CONFIG_IXP4XX_NPE		1
-/* NPE0 PHY address */
-#define	CONFIG_PHY_ADDR			0
-/* NPE1 PHY address (HW Release E only) */
-#define	CONFIG_PHY1_ADDR		1
-/* MII PHY management */
-#define CONFIG_MII			1
-/* Number of ethernet rx buffers & descriptors */
-#define CONFIG_SYS_RX_ETH_BUFFER		16
-#define CONFIG_RESET_PHY_R		1
-
-#define CONFIG_HAS_ETH1			1
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#undef  CONFIG_CMD_NFS
-
-/* BOOTP options */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/* Cache Configuration */
-#define CONFIG_SYS_CACHELINE_SIZE		32
-
-/*
- * environment organization:
- * one flash sector, embedded in uboot area (bottom bootblock flash)
- */
-#define	CONFIG_ENV_IS_IN_FLASH		1
-#define CONFIG_ENV_SIZE			0x2000
-#define CONFIG_ENV_ADDR			(PHYS_FLASH_1 + 0x4000)
-#define CONFIG_SYS_USE_PPCENV			1
-
-#define CONFIG_EXTRA_ENV_SETTINGS					\
-	"npe_ucode=50040000\0"						\
-	"mtd=IXP4XX-Flash.0:256k(uboot),64k(ucode),1152k(linux),-(root)\0" \
-	"kerneladdr=50050000\0"						\
-	"kernelfile=actux1/uImage\0"					\
-	"rootfile=actux1/rootfs\0"					\
-	"rootaddr=50170000\0"						\
-	"loadaddr=10000\0"						\
-	"updateboot_ser=mw.b 10000 ff 40000;"				\
-	" loady ${loadaddr};"						\
-	" run eraseboot writeboot\0"					\
-	"updateboot_net=mw.b 10000 ff 40000;"				\
-	" tftp ${loadaddr} actux1/u-boot.bin;"				\
-	" run eraseboot writeboot\0"					\
-	"eraseboot=protect off 50000000 50003fff;"			\
-	" protect off 50006000 5003ffff;"				\
-	" erase 50000000 50003fff;"					\
-	" erase 50006000 5003ffff\0"					\
-	"writeboot=cp.b 10000 50000000 4000;"				\
-	" cp.b 16000 50006000 3a000\0"					\
-	"updateucode=loady;"						\
-	" era ${npe_ucode} +${filesize};"				\
-	" cp.b ${loadaddr} ${npe_ucode} ${filesize}\0"			\
-	"updateroot=tftp ${loadaddr} ${rootfile};"			\
-	" era ${rootaddr} +${filesize};"				\
-	" cp.b ${loadaddr} ${rootaddr} ${filesize}\0"			\
-	"updatekern=tftp ${loadaddr} ${kernelfile};"			\
-	" era ${kerneladdr} +${filesize};"				\
-	" cp.b ${loadaddr} ${kerneladdr} ${filesize}\0"			\
-	"flashargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock3"	\
-	" rootfstype=squashfs,jffs2 init=/etc/preinit\0"		\
-	"netargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock3"	\
-	" rootfstype=squashfs,jffs2 init=/etc/preinit\0"		\
-	"addtty=setenv bootargs ${bootargs} console=ttyS1,${baudrate}\0" \
-	"addeth=setenv bootargs ${bootargs} ethaddr=${ethaddr}\0"	\
-	"boot_flash=run flashargs addtty addeth;"			\
-	" bootm ${kerneladdr}\0"					\
-	"boot_net=run netargs addtty addeth;"				\
-	" tftpboot ${loadaddr} ${kernelfile};"				\
-	" bootm\0"
-
-/* additions for new relocation code, must be added to all boards */
-#define CONFIG_SYS_INIT_SP_ADDR						\
-	(CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/actux2.h b/include/configs/actux2.h
deleted file mode 100644
index f0cbff79ca..0000000000
--- a/include/configs/actux2.h
+++ /dev/null
@@ -1,206 +0,0 @@
-/*
- * (C) Copyright 2007
- * Michael Schwingen, michael@schwingen.org
- *
- * Configuration settings for the AcTux-2 board.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_IXP425			1
-#define CONFIG_ACTUX2			1
-
-#define	CONFIG_MACH_TYPE		1480
-
-#define CONFIG_DISPLAY_CPUINFO		1
-#define CONFIG_DISPLAY_BOARDINFO	1
-
-#define CONFIG_IXP_SERIAL
-#define CONFIG_SYS_IXP425_CONSOLE		IXP425_UART2
-#define CONFIG_BAUDRATE			115200
-#define CONFIG_BOOTDELAY		5
-#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
-#define CONFIG_BOARD_EARLY_INIT_F	1
-#define CONFIG_SYS_LDSCRIPT	"board/actux2/u-boot.lds"
-
-/***************************************************************
- * U-boot generic defines start here.
- ***************************************************************/
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN			(CONFIG_ENV_SIZE + 128*1024)
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-/* Command line configuration. */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ELF
-#undef CONFIG_CMD_PCI
-#undef CONFIG_PCI
-
-#define CONFIG_BOOTCOMMAND		"run boot_flash"
-/* enable passing of ATAGs */
-#define CONFIG_CMDLINE_TAG		1
-#define CONFIG_SETUP_MEMORY_TAGS	1
-#define CONFIG_INITRD_TAG		1
-#define CONFIG_REVISION_TAG		1
-
-#if defined(CONFIG_CMD_KGDB)
-# define CONFIG_KGDB_BAUDRATE		230400
-#endif
-
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP
-/* Console I/O Buffer Size */
-#define CONFIG_SYS_CBSIZE			256
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-/* max number of command args */
-#define CONFIG_SYS_MAXARGS			16
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE			CONFIG_SYS_CBSIZE
-
-#define CONFIG_SYS_MEMTEST_START		0x00400000
-#define CONFIG_SYS_MEMTEST_END			0x00800000
-
-/* timer clock - 2* OSC_IN system clock */
-#define CONFIG_IXP425_TIMER_CLK                 66666666
-
-/* default load address */
-#define CONFIG_SYS_LOAD_ADDR			0x00010000
-
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE		{ 9600, 19200, 38400, 57600, \
-					  115200, 230400 }
-#define CONFIG_SERIAL_RTS_ACTIVE	1
-
-/* Expansion bus settings */
-#define CONFIG_SYS_EXP_CS0			0xbd113042
-
-/* SDRAM settings */
-#define CONFIG_NR_DRAM_BANKS		1
-#define PHYS_SDRAM_1			0x00000000
-#define CONFIG_SYS_SDRAM_BASE			0x00000000
-
-/* 16MB SDRAM */
-#define CONFIG_SYS_SDR_CONFIG			0x3A
-#define PHYS_SDRAM_1_SIZE		0x01000000
-#define CONFIG_SYS_SDRAM_REFRESH_CNT		0x81a
-#define CONFIG_SYS_SDR_MODE_CONFIG		0x1
-#define CONFIG_SYS_DRAM_SIZE			0x01000000
-
-/* FLASH organization */
-#define CONFIG_SYS_TEXT_BASE		0x50000000
-#define CONFIG_SYS_MAX_FLASH_BANKS		1
-/* max number of sectors on one chip */
-#define CONFIG_SYS_MAX_FLASH_SECT		140
-#define PHYS_FLASH_1			0x50000000
-#define CONFIG_SYS_FLASH_BANKS_LIST		{ PHYS_FLASH_1 }
-
-#define CONFIG_SYS_FLASH_BASE			PHYS_FLASH_1
-#define CONFIG_SYS_MONITOR_BASE		PHYS_FLASH_1
-#define CONFIG_SYS_MONITOR_LEN			(256 << 10)
-#define CONFIG_BOARD_SIZE_LIMIT			262144
-
-/* Use common CFI driver */
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-/* no byte writes on IXP4xx */
-#define CONFIG_SYS_FLASH_CFI_WIDTH		FLASH_CFI_16BIT
-
-/* print 'E' for empty sector on flinfo */
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-
-/* Ethernet */
-
-/* include IXP4xx NPE support */
-#define CONFIG_IXP4XX_NPE		1
-/* NPE0 PHY address */
-#define	CONFIG_PHY_ADDR			0x00
-/* MII PHY management */
-#define CONFIG_MII			1
-/* fixed-speed switch without standard PHY registers on MII */
-#define CONFIG_MII_NPE0_FIXEDLINK       1
-#define CONFIG_MII_NPE0_SPEED           100
-#define CONFIG_MII_NPE0_FULLDUPLEX      1
-
-/* Number of ethernet rx buffers & descriptors */
-#define CONFIG_SYS_RX_ETH_BUFFER		16
-#define CONFIG_RESET_PHY_R		1
-/* ethernet switch connected to MII port */
-#define CONFIG_MII_ETHSWITCH		1
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#undef  CONFIG_CMD_NFS
-
-/* BOOTP options */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/* Cache Configuration */
-#define CONFIG_SYS_CACHELINE_SIZE		32
-
-/*
- * environment organization:
- * one flash sector, embedded in uboot area (bottom bootblock flash)
- */
-#define	CONFIG_ENV_IS_IN_FLASH		1
-#define CONFIG_ENV_SIZE			0x2000
-#define CONFIG_ENV_ADDR			(PHYS_FLASH_1 + 0x4000)
-#define CONFIG_SYS_USE_PPCENV			1
-
-#define CONFIG_EXTRA_ENV_SETTINGS					\
-	"npe_ucode=50040000\0"						\
-	"mtd=IXP4XX-Flash.0:256k(uboot),64k(ucode),1152k(linux),-(root)\0" \
-	"kerneladdr=50050000\0"						\
-	"kernelfile=actux2/uImage\0"					\
-	"rootfile=actux2/rootfs\0"					\
-	"rootaddr=50170000\0"						\
-	"loadaddr=10000\0"						\
-	"updateboot_ser=mw.b 10000 ff 40000;"				\
-	" loady ${loadaddr};"						\
-	" run eraseboot writeboot\0"					\
-	"updateboot_net=mw.b 10000 ff 40000;"				\
-	" tftp ${loadaddr} actux2/u-boot.bin;"				\
-	" run eraseboot writeboot\0"					\
-	"eraseboot=protect off 50000000 50003fff;"			\
-	" protect off 50006000 5003ffff;"				\
-	" erase 50000000 50003fff;"					\
-	" erase 50006000 5003ffff\0"					\
-	"writeboot=cp.b 10000 50000000 4000;"				\
-	" cp.b 16000 50006000 3a000\0"					\
-	"updateucode=loady;"						\
-	" era ${npe_ucode} +${filesize};"				\
-	" cp.b ${loadaddr} ${npe_ucode} ${filesize}\0"			\
-	"updateroot=tftp ${loadaddr} ${rootfile};"			\
-	" era ${rootaddr} +${filesize};"				\
-	" cp.b ${loadaddr} ${rootaddr} ${filesize}\0"			\
-	"updatekern=tftp ${loadaddr} ${kernelfile};"			\
-	" era ${kerneladdr} +${filesize};"				\
-	" cp.b ${loadaddr} ${kerneladdr} ${filesize}\0"			\
-	"flashargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock3"	\
-	" rootfstype=squashfs,jffs2 init=/etc/preinit\0"		\
-	"netargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock3"	\
-	" rootfstype=squashfs,jffs2 init=/etc/preinit\0"		\
-	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0" \
-	"addeth=setenv bootargs ${bootargs} ethaddr=${ethaddr}\0"	\
-	"boot_flash=run flashargs addtty addeth;"			\
-	" bootm ${kerneladdr}\0"					\
-	"boot_net=run netargs addtty addeth;"				\
-	" tftpboot ${loadaddr} ${kernelfile};"				\
-	" bootm\0"
-
-/* additions for new relocation code, must be added to all boards */
-#define CONFIG_SYS_INIT_SP_ADDR						\
-	(CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/actux3.h b/include/configs/actux3.h
deleted file mode 100644
index 763910745c..0000000000
--- a/include/configs/actux3.h
+++ /dev/null
@@ -1,205 +0,0 @@
-/*
- * (C) Copyright 2007
- * Michael Schwingen, michael@schwingen.org
- *
- * Configuration settings for the AcTux-3 board.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_IXP425			1
-#define CONFIG_ACTUX3			1
-
-#define	CONFIG_MACH_TYPE		1481
-
-#define CONFIG_DISPLAY_CPUINFO		1
-#define CONFIG_DISPLAY_BOARDINFO	1
-
-#define CONFIG_IXP_SERIAL
-#define CONFIG_SYS_IXP425_CONSOLE		IXP425_UART2
-#define CONFIG_BAUDRATE			115200
-#define CONFIG_BOOTDELAY		3
-#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
-#define CONFIG_BOARD_EARLY_INIT_F	1
-#define CONFIG_SYS_LDSCRIPT	"board/actux3/u-boot.lds"
-
-/***************************************************************
- * U-boot generic defines start here.
- ***************************************************************/
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN			(CONFIG_ENV_SIZE + 128*1024)
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-/* Command line configuration. */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ELF
-
-#define CONFIG_BOOTCOMMAND		"run boot_flash"
-/* enable passing of ATAGs */
-#define CONFIG_CMDLINE_TAG		1
-#define CONFIG_SETUP_MEMORY_TAGS	1
-#define CONFIG_INITRD_TAG		1
-#define CONFIG_REVISION_TAG		1
-
-#if defined(CONFIG_CMD_KGDB)
-# define CONFIG_KGDB_BAUDRATE		230400
-#endif
-
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP
-/* Console I/O Buffer Size */
-#define CONFIG_SYS_CBSIZE			256
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-/* max number of command args */
-#define CONFIG_SYS_MAXARGS			16
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE			CONFIG_SYS_CBSIZE
-
-#define CONFIG_SYS_MEMTEST_START		0x00400000
-#define CONFIG_SYS_MEMTEST_END			0x00800000
-
-/* timer clock - 2* OSC_IN system clock */
-#define CONFIG_IXP425_TIMER_CLK                 66666666
-
-/* default load address */
-#define CONFIG_SYS_LOAD_ADDR			0x00010000
-
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE		{ 9600, 19200, 38400, 57600, \
-					  115200, 230400 }
-#define CONFIG_SERIAL_RTS_ACTIVE	1
-
-/* Expansion bus settings */
-#define CONFIG_SYS_EXP_CS0			0xbd113442
-
-/* SDRAM settings */
-#define CONFIG_NR_DRAM_BANKS		1
-#define PHYS_SDRAM_1			0x00000000
-#define CONFIG_SYS_SDRAM_BASE			0x00000000
-
-/* 16MB SDRAM */
-#define CONFIG_SYS_SDR_CONFIG			0x3A
-#define PHYS_SDRAM_1_SIZE		0x01000000
-#define CONFIG_SYS_SDRAM_REFRESH_CNT		0x81a
-#define CONFIG_SYS_SDR_MODE_CONFIG		0x1
-#define CONFIG_SYS_DRAM_SIZE			0x01000000
-
-/* FLASH organization */
-#define CONFIG_SYS_TEXT_BASE		0x50000000
-#define CONFIG_SYS_MAX_FLASH_BANKS		1
-/* max number of sectors on one chip */
-#define CONFIG_SYS_MAX_FLASH_SECT		140
-#define PHYS_FLASH_1			0x50000000
-#define CONFIG_SYS_FLASH_BANKS_LIST		{ PHYS_FLASH_1 }
-
-#define CONFIG_SYS_FLASH_BASE			PHYS_FLASH_1
-#define CONFIG_SYS_MONITOR_BASE		PHYS_FLASH_1
-#define CONFIG_SYS_MONITOR_LEN			(256 << 10)
-#define CONFIG_BOARD_SIZE_LIMIT			262144
-
-/* Use common CFI driver */
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-/* no byte writes on IXP4xx */
-#define CONFIG_SYS_FLASH_CFI_WIDTH		FLASH_CFI_16BIT
-
-/* print 'E' for empty sector on flinfo */
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-
-/* Ethernet */
-
-/* include IXP4xx NPE support */
-#define CONFIG_IXP4XX_NPE		1
-
-/* NPE0 PHY address */
-#define	CONFIG_PHY_ADDR			0x10
-/* MII PHY management */
-#define CONFIG_MII			1
-/* fixed-speed switch without standard PHY registers on MII */
-#define CONFIG_MII_NPE0_FIXEDLINK       1
-#define CONFIG_MII_NPE0_SPEED           100
-#define CONFIG_MII_NPE0_FULLDUPLEX      1
-
-/* Number of ethernet rx buffers & descriptors */
-#define CONFIG_SYS_RX_ETH_BUFFER		16
-#define CONFIG_RESET_PHY_R		1
-/* ethernet switch connected to MII port */
-#define CONFIG_MII_ETHSWITCH		1
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#undef  CONFIG_CMD_NFS
-
-/* BOOTP options */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/* Cache Configuration */
-#define CONFIG_SYS_CACHELINE_SIZE		32
-
-/*
- * environment organization:
- * one flash sector, embedded in uboot area (bottom bootblock flash)
- */
-#define	CONFIG_ENV_IS_IN_FLASH		1
-#define CONFIG_ENV_SIZE			0x2000
-#define CONFIG_ENV_ADDR			(PHYS_FLASH_1 + 0x4000)
-#define CONFIG_SYS_USE_PPCENV			1
-
-#define CONFIG_EXTRA_ENV_SETTINGS					\
-	"npe_ucode=50040000\0"						\
-	"mtd=IXP4XX-Flash.0:256k(uboot),64k(ucode),1152k(linux),-(root)\0" \
-	"kerneladdr=50050000\0"						\
-	"kernelfile=actux3/uImage\0"					\
-	"rootfile=actux3/rootfs\0"					\
-	"rootaddr=50170000\0"						\
-	"loadaddr=10000\0"						\
-	"updateboot_ser=mw.b 10000 ff 40000;"				\
-	" loady ${loadaddr};"						\
-	" run eraseboot writeboot\0"					\
-	"updateboot_net=mw.b 10000 ff 40000;"				\
-	" tftp ${loadaddr} actux3/u-boot.bin;"				\
-	" run eraseboot writeboot\0"					\
-	"eraseboot=protect off 50000000 50003fff;"			\
-	" protect off 50006000 5003ffff;"				\
-	" erase 50000000 50003fff;"					\
-	" erase 50006000 5003ffff\0"					\
-	"writeboot=cp.b 10000 50000000 4000;"				\
-	" cp.b 16000 50006000 3a000\0"					\
-	"updateucode=loady;"						\
-	" era ${npe_ucode} +${filesize};"				\
-	" cp.b ${loadaddr} ${npe_ucode} ${filesize}\0"			\
-	"updateroot=tftp ${loadaddr} ${rootfile};"			\
-	" era ${rootaddr} +${filesize};"				\
-	" cp.b ${loadaddr} ${rootaddr} ${filesize}\0"			\
-	"updatekern=tftp ${loadaddr} ${kernelfile};"			\
-	" era ${kerneladdr} +${filesize};"				\
-	" cp.b ${loadaddr} ${kerneladdr} ${filesize}\0"			\
-	"flashargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock3"	\
-	" rootfstype=squashfs,jffs2 init=/etc/preinit\0"		\
-	"netargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock3"	\
-	" rootfstype=squashfs,jffs2 init=/etc/preinit\0"		\
-	"addtty=setenv bootargs ${bootargs} console=ttyS1,${baudrate}\0" \
-	"addeth=setenv bootargs ${bootargs} ethaddr=${ethaddr}\0"	\
-	"boot_flash=run flashargs addtty addeth;"			\
-	" bootm ${kerneladdr}\0"					\
-	"boot_net=run netargs addtty addeth;"				\
-	" tftpboot ${loadaddr} ${kernelfile};"				\
-	" bootm\0"
-
-/* additions for new relocation code, must be added to all boards */
-#define CONFIG_SYS_INIT_SP_ADDR						\
-	(CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/actux4.h b/include/configs/actux4.h
deleted file mode 100644
index 12bd98a7e1..0000000000
--- a/include/configs/actux4.h
+++ /dev/null
@@ -1,204 +0,0 @@
-/*
- * (C) Copyright 2007
- * Michael Schwingen, michael@schwingen.org
- *
- * Configuration settings for the AcTux-4 board.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_IXP425			1
-#define CONFIG_ACTUX4			1
-
-#define	CONFIG_MACH_TYPE		1532
-
-#define CONFIG_DISPLAY_CPUINFO		1
-#define CONFIG_DISPLAY_BOARDINFO	1
-
-#define CONFIG_IXP_SERIAL
-#define CONFIG_SYS_IXP425_CONSOLE		IXP425_UART1
-#define CONFIG_BAUDRATE			115200
-#define CONFIG_BOOTDELAY		3
-#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
-#define CONFIG_BOARD_EARLY_INIT_F	1
-
-/***************************************************************
- * U-boot generic defines start here.
- ***************************************************************/
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN			(CONFIG_ENV_SIZE + 128*1024)
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-/* Command line configuration */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ELF
-
-#define CONFIG_PCI
-#ifdef CONFIG_PCI
-#define CONFIG_CMD_PCI
-#define CONFIG_PCI_PNP
-#define CONFIG_IXP_PCI
-#define CONFIG_PCI_SCAN_SHOW
-#define CONFIG_CMD_PCI_ENUM
-#endif
-
-#define CONFIG_BOOTCOMMAND		"run boot_flash"
-/* enable passing of ATAGs */
-#define CONFIG_CMDLINE_TAG		1
-#define CONFIG_SETUP_MEMORY_TAGS	1
-#define CONFIG_INITRD_TAG		1
-
-#if defined(CONFIG_CMD_KGDB)
-# define CONFIG_KGDB_BAUDRATE		230400
-#endif
-
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP
-/* Console I/O Buffer Size */
-#define CONFIG_SYS_CBSIZE			256
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-/* max number of command args */
-#define CONFIG_SYS_MAXARGS			16
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE			CONFIG_SYS_CBSIZE
-
-#define CONFIG_SYS_MEMTEST_START		0x00400000
-#define CONFIG_SYS_MEMTEST_END			0x00800000
-
-/* timer clock - 2* OSC_IN system clock */
-#define CONFIG_IXP425_TIMER_CLK                 66000000
-
-/* default load address */
-#define CONFIG_SYS_LOAD_ADDR			0x00010000
-
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE		{ 9600, 19200, 38400, 57600, \
-					  115200, 230400 }
-#define CONFIG_SERIAL_RTS_ACTIVE	1
-
-/* Expansion bus settings */
-#define CONFIG_SYS_EXP_CS0			0xbd113003
-
-/* SDRAM settings */
-#define CONFIG_NR_DRAM_BANKS		1
-#define PHYS_SDRAM_1			0x00000000
-#define CONFIG_SYS_SDRAM_BASE			0x00000000
-
-/* 32MB SDRAM */
-#define CONFIG_SYS_SDR_CONFIG			0x18
-#define PHYS_SDRAM_1_SIZE		0x02000000
-#define CONFIG_SYS_SDRAM_REFRESH_CNT		0x81a
-#define CONFIG_SYS_SDR_MODE_CONFIG		0x1
-#define CONFIG_SYS_DRAM_SIZE			0x02000000
-
-/* FLASH organization */
-#define CONFIG_SYS_TEXT_BASE		0x50000000
-#define CONFIG_SYS_MAX_FLASH_BANKS		2
-/* max # of sectors per chip */
-#define CONFIG_SYS_MAX_FLASH_SECT		70
-#define PHYS_FLASH_1			0x50000000
-#define PHYS_FLASH_2			0x51000000
-#define CONFIG_SYS_FLASH_BANKS_LIST		{ PHYS_FLASH_1, PHYS_FLASH_2 }
-
-#define CONFIG_SYS_FLASH_BASE			PHYS_FLASH_1
-#define CONFIG_SYS_MONITOR_BASE		PHYS_FLASH_1
-#define CONFIG_SYS_MONITOR_LEN			(252 << 10)
-#define CONFIG_BOARD_SIZE_LIMIT			258048
-
-/* Use common CFI driver */
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-/* board provides its own flash_init code */
-#define CONFIG_FLASH_CFI_LEGACY		1
-/* no byte writes on IXP4xx */
-#define CONFIG_SYS_FLASH_CFI_WIDTH		FLASH_CFI_16BIT
-/* SST 39VF020 etc. support */
-#define CONFIG_SYS_FLASH_LEGACY_256Kx8	1
-
-/* print 'E' for empty sector on flinfo */
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-
-/* Ethernet */
-
-/* include IXP4xx NPE support */
-#define CONFIG_IXP4XX_NPE		1
-
-/* NPE0 PHY address */
-#define	CONFIG_PHY_ADDR			0x1C
-/* MII PHY management */
-#define CONFIG_MII			1
-
-/* Number of ethernet rx buffers & descriptors */
-#define CONFIG_SYS_RX_ETH_BUFFER		16
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#undef  CONFIG_CMD_NFS
-
-/* BOOTP options */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/* Cache Configuration */
-#define CONFIG_SYS_CACHELINE_SIZE		32
-
-/* environment organization: one complete 4k flash sector */
-#define	CONFIG_ENV_IS_IN_FLASH		1
-#define CONFIG_ENV_SIZE			0x1000
-#define CONFIG_ENV_ADDR			(PHYS_FLASH_1 + 0x3f000)
-
-#define CONFIG_EXTRA_ENV_SETTINGS					\
-	"npe_ucode=51000000\0"						\
-	"mtd=IXP4XX-Flash.0:252k(uboot),4k(uboot_env);"			\
-	"IXP4XX-Flash.1:128k(ucode),1280k(linux),-(root)\0"		\
-	"kerneladdr=51020000\0"						\
-	"kernelfile=actux4/uImage\0"					\
-	"rootfile=actux4/rootfs\0"					\
-	"rootaddr=51160000\0"						\
-	"loadaddr=10000\0"						\
-	"updateboot_ser=mw.b 10000 ff 40000;"				\
-	" loady ${loadaddr};"						\
-	" run eraseboot writeboot\0"					\
-	"updateboot_net=mw.b 10000 ff 40000;"				\
-	" tftp ${loadaddr} actux4/u-boot.bin;"					\
-	" run eraseboot writeboot\0"					\
-	"eraseboot=protect off 50000000 5003efff;"			\
-	" erase 50000000 +${filesize}\0"				\
-	"writeboot=cp.b 10000 50000000 ${filesize}\0"			\
-	"updateucode=loady;"						\
-	" era ${npe_ucode} +${filesize};"				\
-	" cp.b ${loadaddr} ${npe_ucode} ${filesize}\0"			\
-	"updateroot=tftp ${loadaddr} ${rootfile};"			\
-	" era ${rootaddr} +${filesize};"				\
-	" cp.b ${loadaddr} ${rootaddr} ${filesize}\0"			\
-	"updatekern=tftp ${loadaddr} ${kernelfile};"			\
-	" era ${kerneladdr} +${filesize};"				\
-	" cp.b ${loadaddr} ${kerneladdr} ${filesize}\0"			\
-	"flashargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock4"	\
-	" rootfstype=squashfs,jffs2 init=/etc/preinit\0"		\
-	"netargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock4"	\
-	" rootfstype=squashfs,jffs2 init=/etc/preinit\0"		\
-	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0" \
-	"addeth=setenv bootargs ${bootargs} ethaddr=${ethaddr}\0"	\
-	"boot_flash=run flashargs addtty addeth;"			\
-	" bootm ${kerneladdr}\0"					\
-	"boot_net=run netargs addtty addeth;"				\
-	" tftpboot ${loadaddr} ${kernelfile};"				\
-	" bootm\0"
-
-/* additions for new relocation code, must be added to all boards */
-#define CONFIG_SYS_INIT_SP_ADDR						\
-	(CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/cgtqmx6eval.h b/include/configs/cgtqmx6eval.h
index 29a023c499..b189bf116f 100644
--- a/include/configs/cgtqmx6eval.h
+++ b/include/configs/cgtqmx6eval.h
@@ -75,7 +75,7 @@
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"script=boot.scr\0" \
-	"uimage=uImage\0" \
+	"image=zImage\0" \
 	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
 	"boot_dir=/boot\0" \
 	"console=ttymxc1\0" \
@@ -92,24 +92,24 @@
 		"ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 	"bootscript=echo Running bootscript from mmc ...; " \
 		"source\0" \
-	"loaduimage=ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
-		"${boot_dir}/${uimage}\0" \
+	"loadimage=ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
+		"${boot_dir}/${image}\0" \
 	"loadfdt=ext2load mmc ${mmcdev}:${mmcpart} ${fdt_addr} " \
 		"${boot_dir}/${fdt_file}\0" \
 	"mmcboot=echo Booting from mmc ...; " \
 		"run mmcargs; " \
 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 			"if run loadfdt; then " \
-				"bootm ${loadaddr} - ${fdt_addr}; " \
+				"bootz ${loadaddr} - ${fdt_addr}; " \
 			"else " \
 				"if test ${boot_fdt} = try; then " \
-					"bootm; " \
+					"bootz; " \
 				"else " \
 					"echo WARN: Cannot load the DT; " \
 				"fi; " \
 			"fi; " \
 		"else " \
-			"bootm; " \
+			"bootz; " \
 		"fi;\0"
 
 #define CONFIG_BOOTCOMMAND \
@@ -118,7 +118,7 @@
 		   "if run loadbootscript; then " \
 			   "run bootscript; " \
 		   "else " \
-			   "if run loaduimage; then " \
+			   "if run loadimage; then " \
 				   "run mmcboot; " \
 			   "else "\
 				   "echo ERR: Fail to boot from mmc; " \
diff --git a/include/configs/dvlhost.h b/include/configs/dvlhost.h
deleted file mode 100644
index 1af7f16989..0000000000
--- a/include/configs/dvlhost.h
+++ /dev/null
@@ -1,222 +0,0 @@
-/*
- * (C) Copyright 2009
- * Michael Schwingen, michael@schwingen.org
- *
- * Configuration settings for the
- * dLAN200 AV Wireless G ("dvlhost") board.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_IXP425			1
-#define CONFIG_DVLHOST			1
-
-#define	CONFIG_MACH_TYPE		1343
-
-#define CONFIG_DISPLAY_CPUINFO		1
-#define CONFIG_DISPLAY_BOARDINFO	1
-
-#define CONFIG_IXP_SERIAL
-#define CONFIG_SYS_IXP425_CONSOLE	IXP425_UART2
-#define CONFIG_BAUDRATE			115200
-#define CONFIG_BOOTDELAY		3
-#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
-#define CONFIG_BOARD_EARLY_INIT_F	1
-#define CONFIG_SYS_LDSCRIPT	"board/dvlhost/u-boot.lds"
-
-/***************************************************************
- * U-boot generic defines start here.
- ***************************************************************/
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN			(CONFIG_ENV_SIZE + 128*1024)
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-/* Command line configuration. */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ELF
-#define CONFIG_PCI
-#ifdef CONFIG_PCI
-#define CONFIG_CMD_PCI
-#define CONFIG_PCI_PNP
-#define CONFIG_IXP_PCI
-#define CONFIG_PCI_SCAN_SHOW
-#define CONFIG_CMD_PCI_ENUM
-#endif
-
-#define CONFIG_BOOTCOMMAND		"run boot_flash"
-/* enable passing of ATAGs */
-#define CONFIG_CMDLINE_TAG		1
-#define CONFIG_SETUP_MEMORY_TAGS	1
-#define CONFIG_INITRD_TAG		1
-
-#if defined(CONFIG_CMD_KGDB)
-# define CONFIG_KGDB_BAUDRATE		230400
-#endif
-
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP
-/* Console I/O Buffer Size */
-#define CONFIG_SYS_CBSIZE		256
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-/* max number of command args */
-#define CONFIG_SYS_MAXARGS		16
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-
-#define CONFIG_SYS_MEMTEST_START	0x00000000
-#define CONFIG_SYS_MEMTEST_END		0x01D80000
-
-/* timer clock - 2* OSC_IN system clock */
-#define CONFIG_IXP425_TIMER_CLK         66666666
-
-/* default load address */
-#define CONFIG_SYS_LOAD_ADDR		0x00010000
-
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, \
-					  115200, 230400 }
-#define CONFIG_SERIAL_RTS_ACTIVE	1
-
-/* Expansion bus settings */
-#define CONFIG_SYS_EXP_CS0		0xbd113442
-
-/* SDRAM settings */
-#define CONFIG_NR_DRAM_BANKS		1
-#define PHYS_SDRAM_1			0x00000000
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-
-/* 32MB SDRAM: 2* 8Mx16, CL3 */
-#define CONFIG_SYS_SDR_CONFIG		0x18
-#define PHYS_SDRAM_1_SIZE		0x02000000
-#define CONFIG_SYS_SDRAM_REFRESH_CNT	0x800
-#define CONFIG_SYS_SDR_MODE_CONFIG	0x1
-#define CONFIG_SYS_DRAM_SIZE		PHYS_SDRAM_1_SIZE
-
-/* FLASH organization: one Spansion S29AL032D-04 Flash */
-#define CONFIG_SYS_TEXT_BASE		0x50000000
-#define CONFIG_SYS_MAX_FLASH_BANKS	1
-/* max number of sectors on one chip */
-#define CONFIG_SYS_MAX_FLASH_SECT	140
-#define PHYS_FLASH_1			0x50000000
-#define CONFIG_SYS_FLASH_BANKS_LIST	{ PHYS_FLASH_1 }
-
-#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
-#define CONFIG_SYS_MONITOR_BASE		PHYS_FLASH_1
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10)
-#define CONFIG_BOARD_SIZE_LIMIT         262144
-
-/* Use common CFI driver */
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-/* no byte writes on IXP4xx */
-#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
-
-/* print 'E' for empty sector on flinfo */
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-
-/* Ethernet */
-
-/* include IXP4xx NPE support */
-#define CONFIG_IXP4XX_NPE		1
-
-/* NPE0 PHY: MII dLAN200 AVmodule, 100BaseT-FDX fixed */
-#define	CONFIG_PHY_ADDR			0x18
-/* NPE1 PHY: MII IP175 switch, port 5 is host port */
-#define	CONFIG_PHY1_ADDR		0x05
-/* MII PHY management */
-#define CONFIG_MII			1
-/* fixed-speed powerline modem without standard PHY registers on MII */
-#define CONFIG_MII_NPE0_FIXEDLINK       1
-#define CONFIG_MII_NPE0_SPEED           100
-#define CONFIG_MII_NPE0_FULLDUPLEX      1
-/* fixed-speed switch without standard PHY registers on MII */
-#define CONFIG_MII_NPE1_FIXEDLINK       1
-#define CONFIG_MII_NPE1_SPEED           100
-#define CONFIG_MII_NPE1_FULLDUPLEX      1
-
-/* Number of ethernet rx buffers & descriptors */
-#define CONFIG_SYS_RX_ETH_BUFFER	16
-#define CONFIG_RESET_PHY_R		1
-/* ethernet switch connected to MII port */
-#define CONFIG_MII_ETHSWITCH		1
-#define CONFIG_HAS_ETH1			1
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#undef  CONFIG_CMD_NFS
-
-/* BOOTP options */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/* Cache Configuration */
-#define CONFIG_SYS_CACHELINE_SIZE	32
-
-/*
- * environment organization:
- * one flash sector, embedded in uboot area (bottom bootblock flash)
- */
-#define	CONFIG_ENV_IS_IN_FLASH		1
-#define CONFIG_ENV_SIZE			0x2000
-#define CONFIG_ENV_ADDR			(PHYS_FLASH_1 + 0x4000)
-#define CONFIG_SYS_USE_PPCENV		1
-
-#define CONFIG_EXTRA_ENV_SETTINGS					\
-	"npe_ucode=50040000\0"						\
-	"ethprime=NPE1\0"						\
-	"ethrotate=no\0"						\
-	"mtd=IXP4XX-Flash.0:256k(uboot),64k(ucode),1152k(linux),-(root),\0" \
-	"kerneladdr=50050000\0"						\
-	"kernelfile=dvlhost/uImage\0"					\
-	"rootfile=dvlhost/rootfs\0"					\
-	"rootaddr=50170000\0"						\
-	"loadaddr=10000\0"						\
-	"updateboot_ser=mw.b 10000 ff 40000;"				\
-	" loady ${loadaddr};"						\
-	" run eraseboot writeboot\0"					\
-	"updateboot_net=mw.b 10000 ff 40000;"				\
-	" tftp ${loadaddr} dvlhost/u-boot.bin;"				\
-	" run eraseboot writeboot\0"					\
-	"eraseboot=protect off 50000000 50003fff;"			\
-	" protect off 50006000 5003ffff;"				\
-	" erase 50000000 50003fff;"					\
-	" erase 50006000 5003ffff\0"					\
-	"writeboot=cp.b 10000 50000000 4000;"				\
-	" cp.b 16000 50006000 3a000\0"					\
-	"updateucode=loady;"						\
-	" era ${npe_ucode} +${filesize};"				\
-	" cp.b ${loadaddr} ${npe_ucode} ${filesize}\0"			\
-	"updateroot=tftp ${loadaddr} ${rootfile};"			\
-	" era ${rootaddr} +${filesize};"				\
-	" cp.b ${loadaddr} ${rootaddr} ${filesize}\0"			\
-	"updatekern=tftp ${loadaddr} ${kernelfile};"			\
-	" era ${kerneladdr} +${filesize};"				\
-	" cp.b ${loadaddr} ${kerneladdr} ${filesize}\0"			\
-	"flashargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock3"	\
-	" rootfstype=squashfs,jffs2 init=/etc/preinit\0"		\
-	"netargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock3"	\
-	" rootfstype=squashfs,jffs2 init=/etc/preinit\0"		\
-	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0" \
-	"addeth=setenv bootargs ${bootargs} ethaddr=${ethaddr}\0"	\
-	"boot_flash=run flashargs addtty addeth;"			\
-	" bootm ${kerneladdr}\0"					\
-	"boot_net=run netargs addtty addeth;"				\
-	" tftpboot ${loadaddr} ${kernelfile};"				\
-	" bootm\0"
-
-/* additions for new relocation code, must be added to all boards */
-#define CONFIG_SYS_INIT_SP_ADDR						\
-	(CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/hummingboard.h b/include/configs/hummingboard.h
index d36d16e6e3..6bf3408dd0 100644
--- a/include/configs/hummingboard.h
+++ b/include/configs/hummingboard.h
@@ -92,7 +92,7 @@
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"script=boot.scr\0" \
-	"uimage=uImage\0" \
+	"image=zImage\0" \
 	"console=ttymxc0\0" \
 	"splashpos=m,m\0" \
 	"fdt_high=0xffffffff\0" \
@@ -124,22 +124,22 @@
 		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 	"bootscript=echo Running bootscript from mmc ...; " \
 		"source\0" \
-	"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
+	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 	"mmcboot=echo Booting from mmc ...; " \
 		"run mmcargs; " \
 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 			"if run loadfdt; then " \
-				"bootm ${loadaddr} - ${fdt_addr}; " \
+				"bootz ${loadaddr} - ${fdt_addr}; " \
 			"else " \
 				"if test ${boot_fdt} = try; then " \
-					"bootm; " \
+					"bootz; " \
 				"else " \
 					"echo WARN: Cannot load the DT; " \
 				"fi; " \
 			"fi; " \
 		"else " \
-			"bootm; " \
+			"bootz; " \
 		"fi;\0" \
 	"netargs=setenv bootargs console=${console},${baudrate} " \
 		"root=/dev/nfs " \
@@ -151,19 +151,19 @@
 		"else " \
 			"setenv get_cmd tftp; " \
 		"fi; " \
-		"${get_cmd} ${uimage}; " \
+		"${get_cmd} ${image}; " \
 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
-				"bootm ${loadaddr} - ${fdt_addr}; " \
+				"bootz ${loadaddr} - ${fdt_addr}; " \
 			"else " \
 				"if test ${boot_fdt} = try; then " \
-					"bootm; " \
+					"bootz; " \
 				"else " \
 					"echo WARN: Cannot load the DT; " \
 				"fi; " \
 			"fi; " \
 		"else " \
-			"bootm; " \
+			"bootz; " \
 		"fi;\0"
 
 #define CONFIG_BOOTCOMMAND \
@@ -171,7 +171,7 @@
 		   "if run loadbootscript; then " \
 			   "run bootscript; " \
 		   "else " \
-			   "if run loaduimage; then " \
+			   "if run loadimage; then " \
 				   "run mmcboot; " \
 			   "else run netboot; " \
 			   "fi; " \
diff --git a/include/configs/m53evk.h b/include/configs/m53evk.h
index a344af4573..bd67603b50 100644
--- a/include/configs/m53evk.h
+++ b/include/configs/m53evk.h
@@ -39,6 +39,8 @@
 #define CONFIG_CMD_USB
 #define CONFIG_VIDEO
 
+#define CONFIG_REGEX			/* Enable regular expression support */
+
 /*
  * Memory configurations
  */
@@ -128,9 +130,9 @@
 #define CONFIG_LZO
 #define CONFIG_MTD_DEVICE
 #define CONFIG_MTD_PARTITIONS
-#define MTDIDS_DEFAULT			"nand0=mxc-nand"
+#define MTDIDS_DEFAULT			"nand0=mxc_nand"
 #define MTDPARTS_DEFAULT			\
-	"mtdparts=mxc-nand:"			\
+	"mtdparts=mxc_nand:"			\
 		"1m(bootloader)ro,"		\
 		"512k(environment),"		\
 		"512k(redundant-environment),"	\
diff --git a/include/configs/mx23evk.h b/include/configs/mx23evk.h
index 1b40a36fcf..b496892f06 100644
--- a/include/configs/mx23evk.h
+++ b/include/configs/mx23evk.h
@@ -84,7 +84,7 @@
 		"fi ; "	\
 		"fi\0" \
 	"script=boot.scr\0"	\
-	"uimage=uImage\0" \
+	"image=zImage\0" \
 	"console=ttyAMA0\0" \
 	"fdt_file=imx23-evk.dtb\0" \
 	"fdt_addr=0x41000000\0" \
@@ -98,22 +98,22 @@
 		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 	"bootscript=echo Running bootscript from mmc ...; "	\
 		"source\0" \
-	"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
+	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 	"mmcboot=echo Booting from mmc ...; " \
 		"run mmcargs; " \
 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 			"if run loadfdt; then " \
-				"bootm ${loadaddr} - ${fdt_addr}; " \
+				"bootz ${loadaddr} - ${fdt_addr}; " \
 			"else " \
 				"if test ${boot_fdt} = try; then " \
-					"bootm; " \
+					"bootz; " \
 				"else " \
 					"echo WARN: Cannot load the DT; " \
 				"fi; " \
 			"fi; " \
 		"else " \
-			"bootm; " \
+			"bootz; " \
 		"fi;\0"
 
 #define CONFIG_BOOTCOMMAND \
@@ -121,7 +121,7 @@
 		"if run loadbootscript; then " \
 			"run bootscript; " \
 		"else " \
-			"if run loaduimage; then " \
+			"if run loadimage; then " \
 				"run mmcboot; " \
 			"else " \
 				"echo ERR: Fail to boot from MMC; " \
diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h
index 4fd67eb4a0..9b9124ac14 100644
--- a/include/configs/mx28evk.h
+++ b/include/configs/mx28evk.h
@@ -198,7 +198,7 @@
 		"else " \
 			"setenv get_cmd tftp; " \
 		"fi; " \
-		"${get_cmd} ${uimage}; " \
+		"${get_cmd} ${image}; " \
 		"nand write ${loadaddr} kernel ${filesize}\0" \
 	"update_nand_fdt="		/* Update fdt */ \
 		"mtdparts default; " \
@@ -230,10 +230,10 @@
 		"nand read ${loadaddr} kernel 0x00400000; " \
 		"if test ${boot_fdt} = yes; then " \
 			"nand read ${fdt_addr} fdt 0x00080000; " \
-			"bootm ${loadaddr} - ${fdt_addr}; " \
+			"bootz ${loadaddr} - ${fdt_addr}; " \
 		"else " \
 			"if test ${boot_fdt} = no; then " \
-				"bootm; " \
+				"bootz; " \
 			"else " \
 				"echo \"ERROR: Set boot_fdt to yes or no.\"; " \
 			"fi; " \
@@ -248,7 +248,7 @@
 		"fi ; "	\
 		"fi\0" \
 	"script=boot.scr\0"	\
-	"uimage=uImage\0" \
+	"image=zImage\0" \
 	"console_fsl=ttyAM0\0" \
 	"console_mainline=ttyAMA0\0" \
 	"fdt_file=imx28-evk.dtb\0" \
@@ -264,22 +264,22 @@
 		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 	"bootscript=echo Running bootscript from mmc ...; "	\
 		"source\0" \
-	"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
+	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 	"mmcboot=echo Booting from mmc ...; " \
 		"run mmcargs; " \
 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 			"if run loadfdt; then " \
-				"bootm ${loadaddr} - ${fdt_addr}; " \
+				"bootz ${loadaddr} - ${fdt_addr}; " \
 			"else " \
 				"if test ${boot_fdt} = try; then " \
-					"bootm; " \
+					"bootz; " \
 				"else " \
 					"echo WARN: Cannot load the DT; " \
 				"fi; " \
 			"fi; " \
 		"else " \
-			"bootm; " \
+			"bootz; " \
 		"fi;\0" \
 	"netargs=setenv bootargs console=${console_mainline},${baudrate} " \
 		"root=/dev/nfs " \
@@ -291,19 +291,19 @@
 		"else " \
 			"setenv get_cmd tftp; " \
 		"fi; " \
-		"${get_cmd} ${uimage}; " \
+		"${get_cmd} ${image}; " \
 		"if test ${boot_fdt} = yes; then " \
 			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
-				"bootm ${loadaddr} - ${fdt_addr}; " \
+				"bootz ${loadaddr} - ${fdt_addr}; " \
 			"else " \
 				"if test ${boot_fdt} = try; then " \
-					"bootm; " \
+					"bootz; " \
 				"else " \
 					"echo WARN: Cannot load the DT; " \
 				"fi;" \
 			"fi; " \
 		"else " \
-			"bootm; " \
+			"bootz; " \
 		"fi;\0"
 
 #define CONFIG_BOOTCOMMAND \
@@ -311,7 +311,7 @@
 		"if run loadbootscript; then " \
 			"run bootscript; " \
 		"else " \
-			"if run loaduimage; then " \
+			"if run loadimage; then " \
 				"run mmcboot; " \
 			"else run netboot; " \
 			"fi; " \
diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h
index 1cff171951..b389475ebe 100644
--- a/include/configs/mx51evk.h
+++ b/include/configs/mx51evk.h
@@ -143,7 +143,7 @@
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"script=boot.scr\0" \
-	"uimage=uImage\0" \
+	"image=zImage\0" \
 	"fdt_file=imx51-babbage.dtb\0" \
 	"fdt_addr=0x91000000\0" \
 	"boot_fdt=try\0" \
@@ -157,22 +157,22 @@
 		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 	"bootscript=echo Running bootscript from mmc ...; " \
 		"source\0" \
-	"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
+	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 	"mmcboot=echo Booting from mmc ...; " \
 		"run mmcargs; " \
 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 			"if run loadfdt; then " \
-				"bootm ${loadaddr} - ${fdt_addr}; " \
+				"bootz ${loadaddr} - ${fdt_addr}; " \
 			"else " \
 				"if test ${boot_fdt} = try; then " \
-					"bootm; " \
+					"bootz; " \
 				"else " \
 					"echo WARN: Cannot load the DT; " \
 				"fi; " \
 			"fi; " \
 		"else " \
-			"bootm; " \
+			"bootz; " \
 		"fi;\0" \
 	"netargs=setenv bootargs console=ttymxc0,${baudrate} " \
 		"root=/dev/nfs " \
@@ -184,20 +184,20 @@
 		"else " \
 			"setenv get_cmd tftp; " \
 		"fi; " \
-		"${get_cmd} ${uimage}; " \
+		"${get_cmd} ${image}; " \
 		"if test ${boot_fdt} = yes ||  test ${boot_fdt} = try; then " \
 			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
-				"bootm ${loadaddr} - ${fdt_addr}; " \
+				"bootz ${loadaddr} - ${fdt_addr}; " \
 			"else " \
 				"if test ${boot_fdt} = try; then " \
-					"bootm; " \
+					"bootz; " \
 				"else " \
 					"echo ERROR: Cannot load the DT; " \
 					"exit; " \
 				"fi; " \
 			"fi; " \
 		"else " \
-			"bootm; " \
+			"bootz; " \
 		"fi;\0"
 
 #define CONFIG_BOOTCOMMAND \
@@ -205,7 +205,7 @@
 		"if run loadbootscript; then " \
 			"run bootscript; " \
 		"else " \
-			"if run loaduimage; then " \
+			"if run loadimage; then " \
 				"run mmcboot; " \
 			"else run netboot; " \
 			"fi; " \
diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
index ae43ea3c1f..77f8567705 100644
--- a/include/configs/mx53loco.h
+++ b/include/configs/mx53loco.h
@@ -103,7 +103,7 @@
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"script=boot.scr\0" \
-	"uimage=uImage\0" \
+	"image=zImage\0" \
 	"fdt_file=imx53-qsb.dtb\0" \
 	"fdt_addr=0x71000000\0" \
 	"boot_fdt=try\0" \
@@ -116,22 +116,22 @@
 		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 	"bootscript=echo Running bootscript from mmc ...; " \
 		"source\0" \
-	"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
+	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 	"mmcboot=echo Booting from mmc ...; " \
 		"run mmcargs; " \
 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 			"if run loadfdt; then " \
-				"bootm ${loadaddr} - ${fdt_addr}; " \
+				"bootz ${loadaddr} - ${fdt_addr}; " \
 			"else " \
 				"if test ${boot_fdt} = try; then " \
-					"bootm; " \
+					"bootz; " \
 				"else " \
 					"echo WARN: Cannot load the DT; " \
 				"fi; " \
 			"fi; " \
 		"else " \
-			"bootm; " \
+			"bootz; " \
 		"fi;\0" \
 	"netargs=setenv bootargs console=ttymxc0,${baudrate} " \
 		"root=/dev/nfs " \
@@ -143,20 +143,20 @@
 		"else " \
 			"setenv get_cmd tftp; " \
 		"fi; " \
-		"${get_cmd} ${uimage}; " \
+		"${get_cmd} ${image}; " \
 		"if test ${boot_fdt} = yes ||  test ${boot_fdt} = try; then " \
 			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
-				"bootm ${loadaddr} - ${fdt_addr}; " \
+				"bootz ${loadaddr} - ${fdt_addr}; " \
 			"else " \
 				"if test ${boot_fdt} = try; then " \
-					"bootm; " \
+					"bootz; " \
 				"else " \
 					"echo ERROR: Cannot load the DT; " \
 					"exit; " \
 				"fi; " \
 			"fi; " \
 		"else " \
-			"bootm; " \
+			"bootz; " \
 		"fi;\0"
 
 #define CONFIG_BOOTCOMMAND \
@@ -164,7 +164,7 @@
 		"if run loadbootscript; then " \
 			"run bootscript; " \
 		"else " \
-			"if run loaduimage; then " \
+			"if run loadimage; then " \
 				"run mmcboot; " \
 			"else run netboot; " \
 			"fi; " \
diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h
index 514d634c0c..eb107d312a 100644
--- a/include/configs/mx6_common.h
+++ b/include/configs/mx6_common.h
@@ -22,4 +22,9 @@
 #define CONFIG_ARM_ERRATA_751472
 #define CONFIG_BOARD_POSTCLK_INIT
 
+#ifndef CONFIG_SYS_L2CACHE_OFF
+#define CONFIG_SYS_L2_PL310
+#define CONFIG_SYS_PL310_BASE	L2_PL310_BASE
+#endif
+
 #endif
diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h
index f0a82d194c..fd651cfa50 100644
--- a/include/configs/mx6qarm2.h
+++ b/include/configs/mx6qarm2.h
@@ -72,7 +72,7 @@
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"script=boot.scr\0" \
-	"uimage=uImage\0" \
+	"image=zImage\0" \
 	"console=ttymxc3\0" \
 	"fdt_high=0xffffffff\0" \
 	"initrd_high=0xffffffff\0" \
@@ -85,16 +85,16 @@
 		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 	"bootscript=echo Running bootscript from mmc ...; " \
 		"source\0" \
-	"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
+	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 	"mmcboot=echo Booting from mmc ...; " \
 		"run mmcargs; " \
-		"bootm\0" \
+		"bootz\0" \
 	"netargs=setenv bootargs console=${console},${baudrate} " \
 		"root=/dev/nfs " \
 		"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 	"netboot=echo Booting from net ...; " \
 		"run netargs; " \
-		"dhcp ${uimage}; bootm\0" \
+		"dhcp ${image}; bootz\0" \
 
 #define CONFIG_BOOTCOMMAND \
 	"mmc dev ${mmcdev};" \
@@ -102,7 +102,7 @@
 		"if run loadbootscript; then " \
 			"run bootscript; " \
 		"else " \
-			"if run loaduimage; then " \
+			"if run loadimage; then " \
 				"run mmcboot; " \
 			"else run netboot; " \
 			"fi; " \
diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h
index 5ee7fa5448..4efcebf4ff 100644
--- a/include/configs/mx6sabre_common.h
+++ b/include/configs/mx6sabre_common.h
@@ -119,7 +119,7 @@
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"script=boot.scr\0" \
-	"uimage=uImage\0" \
+	"image=zImage\0" \
 	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
 	"fdt_addr=0x18000000\0" \
 	"boot_fdt=try\0" \
@@ -150,22 +150,22 @@
 		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 	"bootscript=echo Running bootscript from mmc ...; " \
 		"source\0" \
-	"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
+	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 	"mmcboot=echo Booting from mmc ...; " \
 		"run mmcargs; " \
 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 			"if run loadfdt; then " \
-				"bootm ${loadaddr} - ${fdt_addr}; " \
+				"bootz ${loadaddr} - ${fdt_addr}; " \
 			"else " \
 				"if test ${boot_fdt} = try; then " \
-					"bootm; " \
+					"bootz; " \
 				"else " \
 					"echo WARN: Cannot load the DT; " \
 				"fi; " \
 			"fi; " \
 		"else " \
-			"bootm; " \
+			"bootz; " \
 		"fi;\0" \
 	"netargs=setenv bootargs console=${console},${baudrate} " \
 		"root=/dev/nfs " \
@@ -177,19 +177,19 @@
 		"else " \
 			"setenv get_cmd tftp; " \
 		"fi; " \
-		"${get_cmd} ${uimage}; " \
+		"${get_cmd} ${image}; " \
 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
-				"bootm ${loadaddr} - ${fdt_addr}; " \
+				"bootz ${loadaddr} - ${fdt_addr}; " \
 			"else " \
 				"if test ${boot_fdt} = try; then " \
-					"bootm; " \
+					"bootz; " \
 				"else " \
 					"echo WARN: Cannot load the DT; " \
 				"fi; " \
 			"fi; " \
 		"else " \
-			"bootm; " \
+			"bootz; " \
 		"fi;\0"
 
 #define CONFIG_BOOTCOMMAND \
@@ -198,7 +198,7 @@
 		"if run loadbootscript; then " \
 		"run bootscript; " \
 		"else " \
-			"if run loaduimage; then " \
+			"if run loadimage; then " \
 				"run mmcboot; " \
 			"else run netboot; " \
 			"fi; " \
diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h
index b29f78cc2c..e5bdcc2c0d 100644
--- a/include/configs/mx6slevk.h
+++ b/include/configs/mx6slevk.h
@@ -76,12 +76,12 @@
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"script=boot.scr\0" \
-	"uimage=uImage\0" \
+	"image=zImage\0" \
 	"console=ttymxc0\0" \
 	"fdt_high=0xffffffff\0" \
 	"initrd_high=0xffffffff\0" \
 	"fdt_file=imx6sl-evk.dtb\0" \
-	"fdt_addr=0x81000000\0" \
+	"fdt_addr=0x88000000\0" \
 	"boot_fdt=try\0" \
 	"ip_dyn=yes\0" \
 	"mmcdev=0\0" \
@@ -93,22 +93,22 @@
 		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 	"bootscript=echo Running bootscript from mmc ...; " \
 		"source\0" \
-	"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
+	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 	"mmcboot=echo Booting from mmc ...; " \
 		"run mmcargs; " \
 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 			"if run loadfdt; then " \
-				"bootm ${loadaddr} - ${fdt_addr}; " \
+				"bootz ${loadaddr} - ${fdt_addr}; " \
 			"else " \
 				"if test ${boot_fdt} = try; then " \
-					"bootm; " \
+					"bootz; " \
 				"else " \
 					"echo WARN: Cannot load the DT; " \
 				"fi; " \
 			"fi; " \
 		"else " \
-			"bootm; " \
+			"bootz; " \
 		"fi;\0" \
 	"netargs=setenv bootargs console=${console},${baudrate} " \
 		"root=/dev/nfs " \
@@ -120,19 +120,19 @@
 		"else " \
 			"setenv get_cmd tftp; " \
 		"fi; " \
-		"${get_cmd} ${uimage}; " \
+		"${get_cmd} ${image}; " \
 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
-				"bootm ${loadaddr} - ${fdt_addr}; " \
+				"bootz ${loadaddr} - ${fdt_addr}; " \
 			"else " \
 				"if test ${boot_fdt} = try; then " \
-					"bootm; " \
+					"bootz; " \
 				"else " \
 					"echo WARN: Cannot load the DT; " \
 				"fi; " \
 			"fi; " \
 		"else " \
-			"bootm; " \
+			"bootz; " \
 		"fi;\0"
 
 #define CONFIG_BOOTCOMMAND \
@@ -141,7 +141,7 @@
 		   "if run loadbootscript; then " \
 			   "run bootscript; " \
 		   "else " \
-			   "if run loaduimage; then " \
+			   "if run loadimage; then " \
 				   "run mmcboot; " \
 			   "else run netboot; " \
 			   "fi; " \
diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h
index e44ec88f71..ac517ce25e 100644
--- a/include/configs/nitrogen6x.h
+++ b/include/configs/nitrogen6x.h
@@ -352,4 +352,15 @@
 #define CONFIG_SUPPORT_RAW_INITRD
 #define CONFIG_CMD_FS_GENERIC
 
+/*
+ * PCI express
+ */
+#define CONFIG_CMD_PCI
+#ifdef CONFIG_CMD_PCI
+#define CONFIG_PCI
+#define CONFIG_PCI_PNP
+#define CONFIG_PCI_SCAN_SHOW
+#define CONFIG_PCIE_IMX
+#endif
+
 #endif	       /* __CONFIG_H */
diff --git a/include/configs/udoo.h b/include/configs/udoo.h
index 28e20b9092..4f518527a0 100644
--- a/include/configs/udoo.h
+++ b/include/configs/udoo.h
@@ -100,7 +100,7 @@
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"script=boot.scr\0" \
-	"uimage=uImage\0" \
+	"image=zImage\0" \
 	"console=ttymxc1\0" \
 	"splashpos=m,m\0" \
 	"fdt_high=0xffffffff\0" \
@@ -132,22 +132,22 @@
 		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 	"bootscript=echo Running bootscript from mmc ...; " \
 		"source\0" \
-	"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
+	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 	"mmcboot=echo Booting from mmc ...; " \
 		"run mmcargs; " \
 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 			"if run loadfdt; then " \
-				"bootm ${loadaddr} - ${fdt_addr}; " \
+				"bootz ${loadaddr} - ${fdt_addr}; " \
 			"else " \
 				"if test ${boot_fdt} = try; then " \
-					"bootm; " \
+					"bootz; " \
 				"else " \
 					"echo WARN: Cannot load the DT; " \
 				"fi; " \
 			"fi; " \
 		"else " \
-			"bootm; " \
+			"bootz; " \
 		"fi;\0" \
 	"netargs=setenv bootargs console=${console},${baudrate} " \
 		"root=/dev/nfs " \
@@ -159,19 +159,19 @@
 		"else " \
 			"setenv get_cmd tftp; " \
 		"fi; " \
-		"${get_cmd} ${uimage}; " \
+		"${get_cmd} ${image}; " \
 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
-				"bootm ${loadaddr} - ${fdt_addr}; " \
+				"bootz ${loadaddr} - ${fdt_addr}; " \
 			"else " \
 				"if test ${boot_fdt} = try; then " \
-					"bootm; " \
+					"bootz; " \
 				"else " \
 					"echo WARN: Cannot load the DT; " \
 				"fi; " \
 			"fi; " \
 		"else " \
-			"bootm; " \
+			"bootz; " \
 		"fi;\0"
 
 #define CONFIG_BOOTCOMMAND \
@@ -179,7 +179,7 @@
 		   "if run loadbootscript; then " \
 			   "run bootscript; " \
 		   "else " \
-			   "if run loaduimage; then " \
+			   "if run loadimage; then " \
 				   "run mmcboot; " \
 			   "else run netboot; " \
 			   "fi; " \
diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h
index 8d0a00dcd9..500fd2fd61 100644
--- a/include/configs/vf610twr.h
+++ b/include/configs/vf610twr.h
@@ -81,7 +81,7 @@
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"script=boot.scr\0" \
-	"uimage=uImage\0" \
+	"image=zImage\0" \
 	"console=ttyLP1\0" \
 	"fdt_high=0xffffffff\0" \
 	"initrd_high=0xffffffff\0" \
@@ -112,22 +112,22 @@
 		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 	"bootscript=echo Running bootscript from mmc ...; " \
 		"source\0" \
-	"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
+	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 	"mmcboot=echo Booting from mmc ...; " \
 		"run mmcargs; " \
 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 			"if run loadfdt; then " \
-				"bootm ${loadaddr} - ${fdt_addr}; " \
+				"bootz ${loadaddr} - ${fdt_addr}; " \
 			"else " \
 				"if test ${boot_fdt} = try; then " \
-					"bootm; " \
+					"bootz; " \
 				"else " \
 					"echo WARN: Cannot load the DT; " \
 				"fi; " \
 			"fi; " \
 		"else " \
-			"bootm; " \
+			"bootz; " \
 		"fi;\0" \
 	"netargs=setenv bootargs console=${console},${baudrate} " \
 		"root=/dev/nfs " \
@@ -139,19 +139,19 @@
 		"else " \
 			"setenv get_cmd tftp; " \
 		"fi; " \
-		"${get_cmd} ${uimage}; " \
+		"${get_cmd} ${image}; " \
 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
-				"bootm ${loadaddr} - ${fdt_addr}; " \
+				"bootz ${loadaddr} - ${fdt_addr}; " \
 			"else " \
 				"if test ${boot_fdt} = try; then " \
-					"bootm; " \
+					"bootz; " \
 				"else " \
 					"echo WARN: Cannot load the DT; " \
 				"fi; " \
 			"fi; " \
 		"else " \
-			"bootm; " \
+			"bootz; " \
 		"fi;\0"
 
 #define CONFIG_BOOTCOMMAND \
@@ -159,7 +159,7 @@
 		   "if run loadbootscript; then " \
 			   "run bootscript; " \
 		   "else " \
-			   "if run loaduimage; then " \
+			   "if run loadimage; then " \
 				   "run mmcboot; " \
 			   "else run netboot; " \
 			   "fi; " \
diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index 787d32d2b8..14f0b90b9b 100644
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -35,27 +35,12 @@
 #define CONFIG_SYS_BAUDRATE_TABLE  \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
 
-/* Zynq Serial driver */
-#ifdef CONFIG_ZYNQ_SERIAL_UART0
-# define CONFIG_ZYNQ_SERIAL_BASEADDR0	0xE0000000
-# define CONFIG_ZYNQ_SERIAL_BAUDRATE0	CONFIG_BAUDRATE
-# define CONFIG_ZYNQ_SERIAL_CLOCK0	50000000
-#endif
-
-#ifdef CONFIG_ZYNQ_SERIAL_UART1
-# define CONFIG_ZYNQ_SERIAL_BASEADDR1	0xE0001000
-# define CONFIG_ZYNQ_SERIAL_BAUDRATE1	CONFIG_BAUDRATE
-# define CONFIG_ZYNQ_SERIAL_CLOCK1	50000000
-#endif
-
-#if defined(CONFIG_ZYNQ_SERIAL_UART0) || defined(CONFIG_ZYNQ_SERIAL_UART1)
-# define CONFIG_ZYNQ_SERIAL
-#endif
-
 /* DCC driver */
 #if defined(CONFIG_ZYNQ_DCC)
 # define CONFIG_ARM_DCC
 # define CONFIG_CPU_V6 /* Required by CONFIG_ARM_DCC */
+#else
+# define CONFIG_ZYNQ_SERIAL
 #endif
 
 /* Ethernet driver */
@@ -178,6 +163,8 @@
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_BOARD_LATE_INIT
 #define CONFIG_SYS_LONGHELP
+#define CONFIG_CLOCKS
+#define CONFIG_CMD_CLK
 #define CONFIG_SYS_MAXARGS		15 /* max number of command args */
 #define CONFIG_SYS_CBSIZE		256 /* Console I/O Buffer Size */
 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
@@ -221,6 +208,9 @@
 #define CONFIG_FIT_SIGNATURE
 #define CONFIG_RSA
 
+/* Extend size of kernel image for uncompression */
+#define CONFIG_SYS_BOOTM_LEN	(20 * 1024 * 1024)
+
 /* Boot FreeBSD/vxWorks from an ELF image */
 #if defined(CONFIG_ZYNQ_BOOT_FREEBSD)
 # define CONFIG_API
@@ -236,5 +226,83 @@
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_MII
+#define CONFIG_CMD_TFTPPUT
+
+/* SPL part */
+#define CONFIG_SPL
+#define CONFIG_CMD_SPL
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+
+#define CONFIG_SPL_LDSCRIPT	"arch/arm/cpu/armv7/zynq/u-boot-spl.lds"
+
+/* Disable dcache for SPL just for sure */
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_DCACHE_OFF
+#undef CONFIG_FPGA
+#endif
+
+/* MMC support */
+#ifdef CONFIG_ZYNQ_SDHCI0
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS      0x200 /* 256 KB */
+#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION    1
+#define CONFIG_SPL_LIBDISK_SUPPORT
+#define CONFIG_SPL_FAT_SUPPORT
+#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME     "u-boot.img"
+#endif
+
+/* Address in RAM where the parameters must be copied by SPL. */
+#define CONFIG_SYS_SPL_ARGS_ADDR	0x10000000
+
+#define CONFIG_SPL_FAT_LOAD_ARGS_NAME		"system.dtb"
+#define CONFIG_SPL_FAT_LOAD_KERNEL_NAME		"uImage"
+
+/* Not using MMC raw mode - just for compilation purpose */
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	0
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS	0
+#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR	0
+
+/* qspi mode is working fine */
+#ifdef CONFIG_ZYNQ_QSPI
+#define CONFIG_SPL_SPI_SUPPORT
+#define CONFIG_SPL_SPI_LOAD
+#define CONFIG_SPL_SPI_FLASH_SUPPORT
+#define CONFIG_SPL_SPI_BUS	0
+#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x100000
+#define CONFIG_SPL_SPI_CS	0
+#endif
+
+/* for booting directly linux */
+#define CONFIG_SPL_OS_BOOT
+
+/* SP location before relocation, must use scratch RAM */
+#define CONFIG_SPL_TEXT_BASE	0x0
+
+/* 3 * 64kB blocks of OCM - one is on the top because of bootrom */
+#define CONFIG_SPL_MAX_SIZE	0x30000
+
+/* The highest 64k OCM address */
+#define OCM_HIGH_ADDR	0xffff0000
+
+/* Just define any reasonable size */
+#define CONFIG_SPL_STACK_SIZE	0x1000
+
+/* SPL stack position - and stack goes down */
+#define CONFIG_SPL_STACK	(OCM_HIGH_ADDR + CONFIG_SPL_STACK_SIZE)
+
+/* On the top of OCM space */
+#define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SPL_STACK + \
+					 GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_SPL_MALLOC_SIZE	0x1000
+
+/* BSS setup */
+#define CONFIG_SPL_BSS_START_ADDR	0x100000
+#define CONFIG_SPL_BSS_MAX_SIZE		0x100000
+
+#define CONFIG_SYS_UBOOT_START	CONFIG_SYS_TEXT_BASE
 
 #endif /* __CONFIG_ZYNQ_COMMON_H */
diff --git a/include/configs/zynq_zc70x.h b/include/configs/zynq_zc70x.h
index 673660e659..de0e24129c 100644
--- a/include/configs/zynq_zc70x.h
+++ b/include/configs/zynq_zc70x.h
@@ -2,7 +2,7 @@
  * (C) Copyright 2013 Xilinx, Inc.
  *
  * Configuration settings for the Xilinx Zynq ZC702 and ZC706 boards
- * See zynq_common.h for Zynq common configs
+ * See zynq-common.h for Zynq common configs
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
diff --git a/include/configs/zynq_zed.h b/include/configs/zynq_zed.h
index 412dede533..274140cb3f 100644
--- a/include/configs/zynq_zed.h
+++ b/include/configs/zynq_zed.h
@@ -2,7 +2,7 @@
  * (C) Copyright 2013 Xilinx, Inc.
  *
  * Configuration for Zynq Evaluation and Development Board - ZedBoard
- * See zynq_common.h for Zynq common configs
+ * See zynq-common.h for Zynq common configs
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */