ARM: remove broken "kb9202" board

Signed-off-by: Wolfgang Denk <wd@denx.de>

1 files changed, 0 insertions, 196 deletions

diff --git a/include/configs/kb9202.h b/include/configs/kb9202.h
deleted file mode 100644
index cfb7ceacc1..0000000000
--- a/include/configs/kb9202.h
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- * Rick Bronson <rick@efn.org>
- *
- * Configuation settings for the AT91RM9200DK board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * Adatped for KwikByte KB920x board from at91rm9200dk.h: 22APR2005
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_AT91_LEGACY
-
-/* ARM asynchronous clock */
-#define AT91C_MAIN_CLOCK	180000000	/* from 10 MHz crystal */
-#define AT91C_MASTER_CLOCK	60000000	/* peripheral clock (AT91C_MASTER_CLOCK / 3) */
-
-#define AT91_SLOW_CLOCK		32768	/* slow clock */
-
-#define CONFIG_ARM920T		1	/* This is an ARM920T Core	*/
-#define CONFIG_AT91RM9200	1	/* It's an Atmel AT91RM9200 SoC	*/
-/* Only define one of the following, based on board type		*/
-/* #define	CONFIG_KB9200		1	 KwikByte KB9202 board	*/
-/* #define	CONFIG_KB9201		1	 KwikByte KB9202 board	*/
-#define	CONFIG_KB9202		1	/* KwikByte KB9202 board	*/
-
-#define	CONFIG_KB920x		1	/* Any KB920x board		*/
-#undef  CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
-#define USE_920T_MMU		1
-
-#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs	*/
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG	1
-
-#define	CONFIG_SKIP_LOWLEVEL_INIT
-
-#define	CONFIG_SYS_LONGHELP
-
-#ifndef roundup
-#define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y))
-#endif
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN	(roundup(CONFIG_ENV_SIZE,4096) + 128*1024)
-
-#define CONFIG_BAUDRATE 115200
-
-/*
- * Hardware drivers
- */
-
-/* define one of these to choose the DBGU, USART0  or USART1 as console */
-#define CONFIG_AT91RM9200_USART
-#define CONFIG_DBGU
-#undef CONFIG_USART0
-#undef CONFIG_USART1
-
-#undef	CONFIG_HWFLOW			/* don't include RTS/CTS flow control support	*/
-
-#undef	CONFIG_MODEM_SUPPORT		/* disable modem initialization stuff */
-
-#define CONFIG_BOOTDELAY	3
-#define CONFIG_ENV_OVERWRITE	1
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_MISC
-
-
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM 0x20000000
-#define PHYS_SDRAM_SIZE 0x2000000  /* 32 megs */
-
-#define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END			CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - (512*1024)
-
-#define CONFIG_NET_MULTI		1
-#ifdef CONFIG_NET_MULTI
-#define CONFIG_DRIVER_AT91EMAC		1
-#define CONFIG_SYS_RX_ETH_BUFFER	8
-#else
-#define CONFIG_DRIVER_ETHER		1
-#endif
-#define CONFIG_NET_RETRY_COUNT		20
-
-#define CONFIG_SYS_FLASH_BASE			0x10000000
-
-#ifdef CONFIG_KB9202
-#define PHYS_FLASH_SIZE			0x1000000
-#else
-#define PHYS_FLASH_SIZE			0x200000
-#endif
-
-#define CONFIG_SYS_MAX_FLASH_BANKS		1
-#define CONFIG_SYS_MAX_FLASH_SECT		256
-
-#define	CONFIG_HARD_I2C
-
-#define	CONFIG_ENV_IS_IN_EEPROM
-
-#ifdef CONFIG_KB9202
-#define CONFIG_ENV_OFFSET			0x3E00
-#define CONFIG_ENV_SIZE			0x0200
-#else
-#define CONFIG_ENV_OFFSET			0x1000
-#define CONFIG_ENV_SIZE			0x1000
-#endif
-#define	CONFIG_SYS_I2C_EEPROM_ADDR		0x50
-#define	CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	6
-#define	CONFIG_SYS_I2C_EEPROM_ADDR_LEN		2
-#define	CONFIG_SYS_I2C_SPEED			50000
-#define	CONFIG_SYS_I2C_SLAVE			0 /* not used */
-#define	CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10
-
-#define CONFIG_SYS_LOAD_ADDR		0x21000000  /* default load address */
-
-#define CONFIG_SYS_BAUDRATE_TABLE	{115200 , 19200, 38400, 57600, 9600 }
-
-#define CONFIG_SYS_PROMPT		"U-Boot> "	/* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size */
-#define CONFIG_SYS_MAXARGS		16		/* max number of command args */
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-
-#define	CONFIG_FLASH_CFI_DRIVER
-#define	CONFIG_SYS_FLASH_CFI
-
-#ifndef __ASSEMBLY__
-/*-----------------------------------------------------------------------
- * Board specific extension for bd_info
- *
- * This structure is embedded in the global bd_info (bd_t) structure
- * and can be used by the board specific code (eg board/...)
- */
-
-struct bd_info_ext {
-	/* helper variable for board environment handling
-	 *
-	 * env_crc_valid == 0    =>   uninitialised
-	 * env_crc_valid  > 0    =>   environment crc in flash is valid
-	 * env_crc_valid  < 0    =>   environment crc in flash is invalid
-	 */
-	int env_crc_valid;
-};
-#endif
-
-#define CONFIG_SYS_HZ 1000
-#define CONFIG_SYS_HZ_CLOCK AT91C_MASTER_CLOCK/2	/* AT91C_TC0_CMR is implicitly set to */
-					/* AT91C_TC_TIMER_DIV1_CLOCK */
-
-#define CONFIG_STACKSIZE	(32*1024)	/* regular stack */
-
-#ifdef CONFIG_USE_IRQ
-#error CONFIG_USE_IRQ not supported
-#endif
-
-#endif