powerpc/t2081qds: Add T2081 QDS board support

T2081 QDS is a high-performance computing evaluation, development and
test platform supporting the T2081 QorIQ Power Architecture processor.

T2081QDS board Overview
-----------------------
- T2081 SoC integrating four 64-bit dual-threads e6500 cores up to 1.8GHz
- 2MB shared L2 and 512KB L3 CoreNet platform cache (CPC)
- CoreNet fabric supporting coherent and noncoherent transactions with
  prioritization and bandwidth allocation
- 32-/64-bit DDR3/DDR3LP SDRAM memory controller with ECC and interleaving
- Ethernet interfaces:
  - Two on-board 10M/100M/1G bps RGMII ports
  - Two 10Gbps XFI with on-board SFP+ cage
  - 1Gbps/2.5Gbps SGMII Riser card
  - 10Gbps XAUI Riser card
- Accelerator:
  - DPAA components consist of FMan, BMan, QMan, PME, DCE and SEC
- SerDes:
  - 8 lanes up to 10.3125GHz
  - Supports SGMII, HiGig, XFI, XAUI and Aurora debug,
- IFC:
  - 512MB NOR Flash, 2GB NAND Flash, PromJet debug port and Qixis FPGA
- eSPI:
  - Three SPI flash (16MB N25Q128A + 16MB EN25S64 + 512KB SST25WF040)
- USB:
  - Two USB2.0 ports with internal PHY (one Type-A + one micro Type mini-AB)
- PCIe:
  - Four PCI Express controllers (two PCIe 2.0 and two PCIe 3.0 with SR-IOV)
- eSDHC:
  - Supports various SD/SDHC/SDXC/eMMC devices with adapter cards and
    voltage translators
- I2C:
  - Four I2C controllers.
- UART:
  - Dual 4-pins UART serial ports

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>

1 files changed, 21 insertions, 8 deletions

diff --git a/include/configs/T2080QDS.h b/include/configs/T208xQDS.h
index 9bd0fe2382..36afe9e0f9 100644
--- a/include/configs/T2080QDS.h
+++ b/include/configs/T208xQDS.h
@@ -5,21 +5,25 @@
  */
 
 /*
- * T2080 QDS board configuration file
+ * T2080/T2081 QDS board configuration file
  */
 
-#ifndef __T2080QDS_H
-#define __T2080QDS_H
+#ifndef __T208xQDS_H
+#define __T208xQDS_H
 
-#define CONFIG_T2080QDS
 #define CONFIG_ICS307_REFCLK_HZ 25000000  /* ICS307 ref clk freq */
 #define CONFIG_MMC
 #define CONFIG_SPI_FLASH
 #define CONFIG_USB_EHCI
+#if defined(CONFIG_PPC_T2080)
+#define CONFIG_T2080QDS
 #define CONFIG_FSL_SATA_V2
 #define CONFIG_SYS_SRIO		/* Enable Serial RapidIO Support */
 #define CONFIG_SRIO1		/* SRIO port 1 */
 #define CONFIG_SRIO2		/* SRIO port 2 */
+#elif defined(CONFIG_PPC_T2081)
+#define CONFIG_T2081QDS
+#endif
 
 /* High Level Configuration Options */
 #define CONFIG_PHYS_64BIT
@@ -44,8 +48,12 @@
 #ifdef CONFIG_RAMBOOT_PBL
 #define CONFIG_RAMBOOT_TEXT_BASE	CONFIG_SYS_TEXT_BASE
 #define CONFIG_RESET_VECTOR_ADDRESS	0xfffffffc
-#define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t2080qds/t2080_pbi.cfg
-#define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t2080qds/t2080_rcw.cfg
+#define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t208xqds/t208x_pbi.cfg
+#if defined(CONFIG_PPC_T2080)
+#define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t208xqds/t2080_rcw.cfg
+#elif defined(CONFIG_PPC_T2081)
+#define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t208xqds/t2081_rcw.cfg
+#endif
 #endif
 
 #define CONFIG_SRIO_PCIE_BOOT_MASTER
@@ -447,7 +455,12 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_FSL_ESPI
 #define CONFIG_SPI_FLASH_SST
 #define CONFIG_SPI_FLASH_STMICRO
+#if defined(CONFIG_T2080QDS)
 #define CONFIG_SPI_FLASH_SPANSION
+#elif defined(CONFIG_T2081QDS)
+#define CONFIG_SPI_FLASH_EON
+#endif
+
 #define CONFIG_CMD_SF
 #define CONFIG_SF_DEFAULT_SPEED	 10000000
 #define CONFIG_SF_DEFAULT_MODE	  0
@@ -505,7 +518,7 @@ unsigned long get_board_ddr_clk(void);
 
 #ifdef CONFIG_PCI
 #define CONFIG_PCI_INDIRECT_BRIDGE
-#define CONFIG_FSL_PCIE_RESET           /* need PCIe reset errata LSZ ADD */
+#define CONFIG_FSL_PCIE_RESET	   /* need PCIe reset errata */
 #define CONFIG_NET_MULTI
 #define CONFIG_E1000
 #define CONFIG_PCI_PNP		/* do pci plug-and-play */
@@ -801,4 +814,4 @@ unsigned long get_board_ddr_clk(void);
 #undef CONFIG_CMD_USB
 #endif
 
-#endif	/* __T2080QDS_H */
+#endif	/* __T208xQDS_H */