PXA: Balloon3 board support

The following hardware is currently supported:
- UART
- USB Host
- FPGA

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>

1 files changed, 269 insertions, 0 deletions

diff --git a/include/configs/balloon3.h b/include/configs/balloon3.h
new file mode 100644
index 0000000000..9066a24304
--- /dev/null
+++ b/include/configs/balloon3.h
@@ -0,0 +1,269 @@
+/*
+ * Balloon3 configuration file
+ *
+ * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef	__CONFIG_H
+#define	__CONFIG_H
+
+/*
+ * High Level Board Configuration Options
+ */
+#define	CONFIG_PXA27X		1	/* Marvell PXA270 CPU */
+#define	CONFIG_BALLOON3		1	/* Balloon3 board */
+
+/*
+ * Environment settings
+ */
+#define	CONFIG_ENV_OVERWRITE
+#define	CONFIG_SYS_MALLOC_LEN		(128*1024)
+#define	CONFIG_SYS_GBL_DATA_SIZE	128
+
+#define	CONFIG_BOOTCOMMAND						\
+	"if usb reset && fatload usb 0 0xa4000000 uImage; then "	\
+		"bootm 0xa4000000; "					\
+	"fi; "								\
+	"bootm 0x40000;"
+#define	CONFIG_BOOTARGS			"console=tty0 console=ttyS2,115200"
+#define	CONFIG_TIMESTAMP
+#define	CONFIG_BOOTDELAY		2	/* Autoboot delay */
+#define	CONFIG_CMDLINE_TAG
+#define	CONFIG_SETUP_MEMORY_TAGS
+
+#define	CONFIG_LZMA			/* LZMA compression support */
+
+/*
+ * Serial Console Configuration
+ */
+#define	CONFIG_PXA_SERIAL
+#define	CONFIG_STUART			1
+#define	CONFIG_BAUDRATE			115200
+#define	CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * Bootloader Components Configuration
+ */
+#include <config_cmd_default.h>
+
+#undef	CONFIG_CMD_NET
+#undef	CONFIG_CMD_ENV
+#undef	CONFIG_CMD_IMLS
+#define	CONFIG_CMD_USB
+#define	CONFIG_CMD_FPGA
+#undef	CONFIG_LCD
+
+/*
+ * KGDB
+ */
+#ifdef	CONFIG_CMD_KGDB
+#define	CONFIG_KGDB_BAUDRATE		230400	/* kgdb serial port speed */
+#define	CONFIG_KGDB_SER_INDEX		2	/* which serial port to use */
+#endif
+
+/*
+ * HUSH Shell Configuration
+ */
+#define	CONFIG_SYS_HUSH_PARSER		1
+#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+
+#define	CONFIG_SYS_LONGHELP
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define	CONFIG_SYS_PROMPT		"$ "
+#else
+#define	CONFIG_SYS_PROMPT		"=> "
+#endif
+#define	CONFIG_SYS_CBSIZE		256
+#define	CONFIG_SYS_PBSIZE		\
+	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+#define	CONFIG_SYS_MAXARGS		16
+#define	CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
+#define	CONFIG_SYS_DEVICE_NULLDEV	1
+
+/*
+ * Clock Configuration
+ */
+#undef	CONFIG_SYS_CLKS_IN_HZ
+#define	CONFIG_SYS_HZ			3250000		/* Timer @ 3250000 Hz */
+#define	CONFIG_SYS_CPUSPEED		0x290		/* 520MHz */
+
+/*
+ * Stack sizes
+ */
+#define	CONFIG_STACKSIZE		(128*1024)	/* regular stack */
+#ifdef	CONFIG_USE_IRQ
+#define	CONFIG_STACKSIZE_IRQ		(4*1024)	/* IRQ stack */
+#define	CONFIG_STACKSIZE_FIQ		(4*1024)	/* FIQ stack */
+#endif
+
+/*
+ * DRAM Map
+ */
+#define	CONFIG_NR_DRAM_BANKS		3		/* 2 banks of DRAM */
+#define	PHYS_SDRAM_1			0xa0000000	/* SDRAM Bank #1 */
+#define	PHYS_SDRAM_1_SIZE		0x08000000	/* 128 MB */
+#define	PHYS_SDRAM_2			0xb0000000	/* SDRAM Bank #2 */
+#define	PHYS_SDRAM_2_SIZE		0x08000000	/* 128 MB */
+#define	PHYS_SDRAM_3			0x80000000	/* SDRAM Bank #2 */
+#define	PHYS_SDRAM_3_SIZE		0x08000000	/* 128 MB */
+
+#define	CONFIG_SYS_DRAM_BASE		0xa0000000	/* CS0 */
+#define	CONFIG_SYS_DRAM_SIZE		0x18000000	/* 384 MB DRAM */
+
+#define	CONFIG_SYS_MEMTEST_START	0xa0400000	/* memtest works on */
+#define	CONFIG_SYS_MEMTEST_END		0xa0800000	/* 4 ... 8 MB in DRAM */
+
+#define	CONFIG_SYS_LOAD_ADDR		0xa1000000
+
+/*
+ * NOR FLASH
+ */
+#ifdef	CONFIG_CMD_FLASH
+#define	PHYS_FLASH_1			0x00000000	/* Flash Bank #1 */
+#define	PHYS_FLASH_SIZE			0x00800000	/* 8 MB */
+#define	CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
+
+#define	CONFIG_SYS_FLASH_CFI
+#define	CONFIG_FLASH_CFI_DRIVER		1
+#define	CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_16BIT
+
+#define	CONFIG_SYS_MAX_FLASH_BANKS	1
+#define	CONFIG_SYS_MAX_FLASH_SECT	256
+
+#define	CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
+
+#define	CONFIG_SYS_FLASH_ERASE_TOUT	(2*CONFIG_SYS_HZ)
+#define	CONFIG_SYS_FLASH_WRITE_TOUT	(2*CONFIG_SYS_HZ)
+#define	CONFIG_SYS_FLASH_LOCK_TOUT	(2*CONFIG_SYS_HZ)
+#define	CONFIG_SYS_FLASH_UNLOCK_TOUT	(2*CONFIG_SYS_HZ)
+#define	CONFIG_SYS_FLASH_PROTECTION
+#define	CONFIG_ENV_IS_IN_FLASH
+#else
+#define	CONFIG_SYS_NO_FLASH
+#define	CONFIG_SYS_ENV_IS_NOWHERE
+#endif
+
+#define	CONFIG_SYS_MONITOR_BASE		0x000000
+#define	CONFIG_SYS_MONITOR_LEN		0x40000
+
+#define	CONFIG_ENV_SIZE			0x2000
+#define	CONFIG_ENV_ADDR			0x40000
+#define	CONFIG_ENV_SECT_SIZE		0x10000
+
+/*
+ * GPIO settings
+ */
+#define	CONFIG_SYS_GPSR0_VAL	0x307dc7fd
+#define	CONFIG_SYS_GPSR1_VAL	0x03cffa4e
+#define	CONFIG_SYS_GPSR2_VAL	0x7131c000
+#define	CONFIG_SYS_GPSR3_VAL	0x01e1f3ff
+
+#define	CONFIG_SYS_GPCR0_VAL	0x0
+#define	CONFIG_SYS_GPCR1_VAL	0x0
+#define	CONFIG_SYS_GPCR2_VAL	0x0
+#define	CONFIG_SYS_GPCR3_VAL	0x0
+
+#define	CONFIG_SYS_GPDR0_VAL	0xc0f98e02
+#define	CONFIG_SYS_GPDR1_VAL	0xfcffa8b7
+#define	CONFIG_SYS_GPDR2_VAL	0x22e3ffff
+#define	CONFIG_SYS_GPDR3_VAL	0x000201fe
+
+#define	CONFIG_SYS_GAFR0_L_VAL	0x96c00000
+#define	CONFIG_SYS_GAFR0_U_VAL	0xa5e5459b
+#define	CONFIG_SYS_GAFR1_L_VAL	0x699b759a
+#define	CONFIG_SYS_GAFR1_U_VAL	0xaaa5a5aa
+#define	CONFIG_SYS_GAFR2_L_VAL	0xaaaaaaaa
+#define	CONFIG_SYS_GAFR2_U_VAL	0x01f9a6aa
+#define	CONFIG_SYS_GAFR3_L_VAL	0x54510003
+#define	CONFIG_SYS_GAFR3_U_VAL	0x00001599
+
+#define	CONFIG_SYS_PSSR_VAL	0x30
+
+/*
+ * Clock settings
+ */
+#define	CONFIG_SYS_CKEN		0xffffffff
+#define	CONFIG_SYS_CCCR		0x00000290
+
+/*
+ * Memory settings
+ */
+#define	CONFIG_SYS_MSC0_VAL	0x7ff07ff8
+#define	CONFIG_SYS_MSC1_VAL	0x7ff07ff0
+#define	CONFIG_SYS_MSC2_VAL	0x74a42491
+#define	CONFIG_SYS_MDCNFG_VAL	0x89d309d3
+#define	CONFIG_SYS_MDREFR_VAL	0x001d8018
+#define	CONFIG_SYS_MDMRS_VAL	0x00220022
+#define	CONFIG_SYS_FLYCNFG_VAL	0x00000000
+#define	CONFIG_SYS_SXCNFG_VAL	0x00000000
+#define	CONFIG_SYS_MEM_BUF_IMP	0x0f
+
+/*
+ * PCMCIA and CF Interfaces
+ */
+#define	CONFIG_SYS_MECR_VAL	0x00000000
+#define	CONFIG_SYS_MCMEM0_VAL	0x00014307
+#define	CONFIG_SYS_MCMEM1_VAL	0x00014307
+#define	CONFIG_SYS_MCATT0_VAL	0x0001c787
+#define	CONFIG_SYS_MCATT1_VAL	0x0001c787
+#define	CONFIG_SYS_MCIO0_VAL	0x0001430f
+#define	CONFIG_SYS_MCIO1_VAL	0x0001430f
+
+/*
+ * LCD
+ */
+#ifdef	CONFIG_LCD
+#define	CONFIG_BALLOON3LCD
+#define	CONFIG_VIDEO_LOGO
+#define	CONFIG_CMD_BMP
+#define	CONFIG_SPLASH_SCREEN
+#define	CONFIG_SPLASH_SCREEN_ALIGN
+#define	CONFIG_VIDEO_BMP_GZIP
+#define	CONFIG_VIDEO_BMP_RLE8
+#define	CONFIG_SYS_VIDEO_LOGO_MAX_SIZE	(2 << 20)
+#endif
+
+/*
+ * USB
+ */
+#ifdef	CONFIG_CMD_USB
+#define	CONFIG_USB_OHCI_NEW
+#define	CONFIG_SYS_USB_OHCI_CPU_INIT
+#define	CONFIG_SYS_USB_OHCI_BOARD_INIT
+#define	CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
+#define	CONFIG_SYS_USB_OHCI_REGS_BASE	0x4C000000
+#define	CONFIG_SYS_USB_OHCI_SLOT_NAME	"balloon3"
+#define	CONFIG_USB_STORAGE
+#define	CONFIG_DOS_PARTITION
+#define	CONFIG_CMD_FAT
+#define	CONFIG_CMD_EXT2
+#endif
+
+/*
+ * FPGA
+ */
+#ifdef	CONFIG_CMD_FPGA
+#define	CONFIG_FPGA
+#define	CONFIG_FPGA_XILINX
+#define	CONFIG_FPGA_SPARTAN3
+#define	CONFIG_SYS_FPGA_PROG_FEEDBACK
+#define	CONFIG_SYS_FPGA_WAIT	1000
+#define	CONFIG_MAX_FPGA_DEVICES	1
+#endif
+
+#endif	/* __CONFIG_H */