mpc8xx: remove RPXlite_dw, quantum board support

These boards are old enough and have no maintainers.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

5 files changed, 1 insertions, 924 deletions

diff --git a/include/common.h b/include/common.h
index 2e5a6d3d2f..136a445139 100644
--- a/include/common.h
+++ b/include/common.h
@@ -499,8 +499,6 @@ extern ssize_t spi_read	 (uchar *, int, uchar *, int);
 extern ssize_t spi_write (uchar *, int, uchar *, int);
 #endif
 
-void rpxlite_init (void);
-
 #ifdef CONFIG_HERMES
 /* $(BOARD)/hermes.c */
 void hermes_start_lxt980 (int speed);
diff --git a/include/commproc.h b/include/commproc.h
index 5992f11de3..ef59df9388 100644
--- a/include/commproc.h
+++ b/include/commproc.h
@@ -900,32 +900,6 @@ typedef struct scc_enet {
 
 #endif	/* CONFIG_NETVIA */
 
-/***  RPXLITE  ********************************************************/
-
-#ifdef CONFIG_RPXLITE
-/* This ENET stuff is for the MPC850 with ethernet on SCC2.  Some of
- * this may be unique to the RPX-Lite configuration.
- * Note TENA is on Port B.
- */
-#define	PROFF_ENET	PROFF_SCC2
-#define	CPM_CR_ENET	CPM_CR_CH_SCC2
-#define	SCC_ENET	1
-#define PA_ENET_RXD	((ushort)0x0004)
-#define PA_ENET_TXD	((ushort)0x0008)
-#define PA_ENET_TCLK	((ushort)0x0200)
-#define PA_ENET_RCLK	((ushort)0x0800)
-#if defined(CONFIG_RMU)
-#define PC_ENET_TENA	((uint)0x00000002)	/* PC14 */
-#else
-#define PB_ENET_TENA	((uint)0x00002000)
-#endif
-#define PC_ENET_CLSN	((ushort)0x0040)
-#define PC_ENET_RENA	((ushort)0x0080)
-
-#define SICR_ENET_MASK	((uint)0x0000ff00)
-#define SICR_ENET_CLKRT	((uint)0x00003d00)
-#endif	/* CONFIG_RPXLITE */
-
 /***  SM850  *********************************************************/
 
 /* The SM850 Service Module uses SCC2 for IrDA and SCC3 for Ethernet */
diff --git a/include/configs/RPXlite_DW.h b/include/configs/RPXlite_DW.h
deleted file mode 100644
index 50c82c68eb..0000000000
--- a/include/configs/RPXlite_DW.h
+++ /dev/null
@@ -1,462 +0,0 @@
-/*
- * (C) Copyright 2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- * Sam Song, IEMC. SHU, samsongshu@yahoo.com.cn
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-/* Yoo. Jonghoon, IPone, yooth@ipone.co.kr
- * U-BOOT port on RPXlite board
- */
-
-/*
- * Sam Song, IEMC. SHU, samsongshu@yahoo.com.cn
- * U-BOOT port on RPXlite DW version board--RPXlite_DW
- * June 8 ,2004
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-/* #define DEBUG	1 */
-/* #define DEPLOYMENT	1 */
-
-#undef	CONFIG_MPC860
-#define CONFIG_MPC823		1	/* This is a MPC823e CPU. */
-#define CONFIG_RPXLITE		1	/* RPXlite DW version board */
-
-#define	CONFIG_SYS_TEXT_BASE	0xff000000
-
-#ifdef	CONFIG_LCD			/* with LCD controller ?	*/
-#define CONFIG_MPC8XX_LCD
-#define CONFIG_SPLASH_SCREEN		/* ... with splashscreen support*/
-#endif
-
-#define CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
-#undef	CONFIG_8xx_CONS_SMC2
-#undef	CONFIG_8xx_CONS_NONE
-#define CONFIG_BAUDRATE		9600	/* console default baudrate = 9600bps	*/
-
-#ifdef DEBUG
-#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
-#else
-#define CONFIG_BOOTDELAY	6	/* autoboot after 6 seconds	*/
-
-#ifdef DEPLOYMENT
-#define CONFIG_BOOT_RETRY_TIME		-1
-#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT		\
-	"autoboot in %d seconds (stop with 'st')...\n", bootdelay
-#define CONFIG_AUTOBOOT_STOP_STR	"st"
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-#define CONFIG_RESET_TO_RETRY		1
-#define CONFIG_BOOT_RETRY_MIN		1
-#endif	/* DEPLOYMENT */
-#endif	/* DEBUG */
-
-/* pre-boot commands */
-#define CONFIG_PREBOOT		"setenv stdout serial;setenv stdin serial"
-
-#undef	CONFIG_BOOTARGS
-#define CONFIG_EXTRA_ENV_SETTINGS					\
-	"netdev=eth0\0"							\
-	"nfsargs=setenv bootargs console=tty0 console=ttyS0,9600 "	\
-		"root=/dev/nfs rw nfsroot=${serverip}:${rootpath}\0"	\
-	"ramargs=setenv bootargs console=tty0 root=/dev/ram rw\0"	\
-	"addip=setenv bootargs ${bootargs} "				\
-		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
-		":${hostname}:${netdev}:off panic=1\0"			\
-	"flash_nfs=run nfsargs addip;"					\
-		"bootm ${kernel_addr}\0"				\
-	"flash_self=run ramargs addip;"					\
-		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
-	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
-	"gatewayip=172.16.115.254\0"					\
-	"netmask=255.255.255.0\0"					\
-	"kernel_addr=ff040000\0"					\
-	"ramdisk_addr=ff200000\0"					\
-	"ku=era ${kernel_addr} ff1fffff;cp.b 100000 ${kernel_addr} "	\
-		"${filesize};md ${kernel_addr};"			\
-		"echo kernel updating finished\0"			\
-	"uu=protect off 1:0-4;era 1:0-4;cp.b 100000 ff000000 "		\
-		"${filesize};md ff000000;"				\
-		"echo u-boot updating finished\0"			\
-	"eu=protect off 1:6;era 1:6;reset\0"				\
-	"lcd=setenv stdout lcd;setenv stdin lcd\0"			\
-	"ser=setenv stdout serial;setenv stdin serial\0"		\
-	"verify=no"
-
-#define CONFIG_BOOTCOMMAND	"run flash_self"
-
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
-#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
-#undef	CONFIG_STATUS_LED		/* disturbs display. Status LED disabled. */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-#if 1	       /* Enable this stuff could make image enlarge about 25KB. Mask it if you
-		  don't want the advanced function */
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_DHCP
-
-#ifdef	CONFIG_SPLASH_SCREEN
-#define CONFIG_CMD_BMP
-#endif
-
-
-/* test-only */
-#define CONFIG_SYS_JFFS2_FIRST_BANK	0	    /* use for JFFS2 */
-#define CONFIG_SYS_JFFS2_NUM_BANKS	1	    /* ! second bank contains U-Boot */
-
-#define CONFIG_NETCONSOLE
-
-#endif	/* 1 */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
-#define CONFIG_SYS_PROMPT	"u-boot>"	/* Monitor Command Prompt   */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
-#else
-#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
-#endif
-
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_MEMTEST_START	0x0040000	/* memtest works on	*/
-#define CONFIG_SYS_MEMTEST_END		0x00C0000	/* 4 ... 12 MB in DRAM	*/
-#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR		0xFA200000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE	0x2F00		/* Size of used area in DPRAM	*/
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_FLASH_BASE		0xFF000000
-
-#if defined(DEBUG) || defined(CONFIG_CMD_IDE)
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#else
-#define CONFIG_SYS_MONITOR_LEN		(128 << 10)	/* Reserve 128 kB for Monitor */
-#endif
-
-#define CONFIG_SYS_MONITOR_BASE	0xFF000000
-#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CONFIG_SYS_MAX_FLASH_SECT	71	/* max number of sectors on one chip	*/
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
-
-#ifdef	CONFIG_ENV_IS_IN_NVRAM
-#define CONFIG_ENV_ADDR		0xFA000100
-#define CONFIG_ENV_SIZE		0x1000
-#else
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_OFFSET		0x30000 /* Offset of Environment Sector		*/
-#define CONFIG_ENV_SIZE		0x8000	/* Total Size of Environment Sector	*/
-#endif	/* CONFIG_ENV_IS_IN_NVRAM */
-
-#define CONFIG_SYS_RESET_ADDRESS	((ulong)((((immap_t *)CONFIG_SYS_IMMR)->im_clkrst.res)))
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control	32-bit			12-35
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
-			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | 0x00000600 | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
-#endif	/* We can get SYPCR: 0xFFFF0689. */
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration	32-bit			 12-30
- *-----------------------------------------------------------------------
- * PCMCIA config., multi-function pin tri-state
- */
-#define CONFIG_SYS_SIUMCR	(SIUMCR_MLRC10)	       /* SIUMCR:0x00000800 */
-
-/*---------------------------------------------------------------------
- * TBSCR - Time Base Status and Control	 16-bit			 12-16
- *---------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF | TBSCR_TBE)
-/* TBSCR: 0x00C3 [SAM] */
-
-/*-----------------------------------------------------------------------
- * RTCSC - Real-Time Clock Status and Control Register 16-bit	 12-18
- *-----------------------------------------------------------------------
- * [RTC enabled but not stopped on FRZ]
- */
-#define CONFIG_SYS_RTCSC    (RTCSC_SEC | RTCSC_ALR | RTCSC_RTE) /* RTCSC:0x00C1	*/
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control 16-bit		 12-23
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- * [Periodic timer enabled,Periodic timer interrupt disable. ]
- */
-#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF | PISCR_PTE)  /* PISCR:0x0083		*/
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register	32-bit	 5-7
- *-----------------------------------------------------------------------
- * Reset PLL lock status sticky bit, timer expired status bit and timer
- * interrupt status bit
- */
-/* up to 64 MHz we use a 1:2 clock */
-#if defined(RPXlite_64MHz)
-#define CONFIG_SYS_PLPRCR	( (7 << PLPRCR_MF_SHIFT) | PLPRCR_TEXPS )   /*PLPRCR: 0x00700000. */
-#else
-#define CONFIG_SYS_PLPRCR	( (5 << PLPRCR_MF_SHIFT) | PLPRCR_TEXPS )
-#endif
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register		5-3
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- */
-#define SCCR_MASK	SCCR_EBDF00
-/* Up to 48MHz system clock, we use 1:1 SYSTEM/BUS ratio */
-#if defined(RPXlite_64MHz)
-#define CONFIG_SYS_SCCR	( SCCR_TBS | SCCR_EBDF01 )  /* %%%SCCR:0x02020000 */
-#else
-#define CONFIG_SYS_SCCR	( SCCR_TBS | SCCR_EBDF00 )  /* %%%SCCR:0x02000000 */
-#endif
-
-/*-----------------------------------------------------------------------
- * PCMCIA stuff
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
-#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
-
-/*-----------------------------------------------------------------------
- * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
- *-----------------------------------------------------------------------
- */
-#define CONFIG_IDE_PREINIT	1	/* Use preinit IDE hook */
-#define CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card Adapter */
-
-#undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE	 not supported	*/
-#undef	CONFIG_IDE_LED			/* LED	 for ide not supported	*/
-#undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
-
-#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
-
-#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
-#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_PCMCIA_MEM_ADDR
-
-/* Offset for data I/O			*/
-#define CONFIG_SYS_ATA_DATA_OFFSET	(CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
-
-/* Offset for normal register accesses	*/
-#define CONFIG_SYS_ATA_REG_OFFSET	(2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
-
-/* Offset for alternate registers	*/
-#define CONFIG_SYS_ATA_ALT_OFFSET	0x0100
-
-#define		CONFIG_SYS_DER		0
-
-/*
- * Init Memory Controller:
- *
- * BR0 and OR0 (FLASH)
- */
-#define FLASH_BASE_PRELIM	0xFC000000	/* FLASH base	*/
-#define CONFIG_SYS_PRELIM_OR_AM	0xFC000000	/* OR addr mask */
-
-/* FLASH timing: ACS = 0, TRLX = 0, CSNT = 0, SCY = 8, ETHR = 0, BIH = 1 */
-#define CONFIG_SYS_OR_TIMING_FLASH (OR_SCY_8_CLK | OR_BI)
-#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE_PRELIM & BR_BA_MSK) | BR_V)
-
-/*
- * BR1 and OR1 (SDRAM)
- *
- */
-#define SDRAM_BASE_PRELIM	0x00000000	/* SDRAM base	*/
-#define SDRAM_MAX_SIZE		0x08000000	/* max 128 MB in system */
-
-/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-#define CONFIG_SYS_OR_TIMING_SDRAM	0x00000E00
-#define CONFIG_SYS_OR_AM_SDRAM		(-(SDRAM_MAX_SIZE & OR_AM_MSK))
-#define CONFIG_SYS_OR1_PRELIM	( CONFIG_SYS_OR_AM_SDRAM | CONFIG_SYS_OR_TIMING_SDRAM )
-#define CONFIG_SYS_BR1_PRELIM	((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
-
-/* RPXlite mem setting */
-#define CONFIG_SYS_BR3_PRELIM	0xFA400001		/* BCSR */
-#define CONFIG_SYS_OR3_PRELIM	0xFF7F8900
-#define CONFIG_SYS_BR4_PRELIM	0xFA000401		/* NVRAM&SRAM */
-#define CONFIG_SYS_OR4_PRELIM	0xFFFE0040
-
-/*
- * Memory Periodic Timer Prescaler
- */
-/* periodic timer for refresh */
-#if defined(RPXlite_64MHz)
-#define CONFIG_SYS_MAMR_PTA	32
-#else
-#define CONFIG_SYS_MAMR_PTA	20
-#endif
-
-/*
- * Refresh clock Prescalar
- */
-#define CONFIG_SYS_MPTPR	MPTPR_PTP_DIV2
-
-/*
- * MAMR settings for SDRAM
- */
-
-/* 9 column SDRAM */
-#define CONFIG_SYS_MAMR_9COL  ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE | \
-			MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10)
-/* CONFIG_SYS_MAMR_9COL:0x20904000 @ 64MHz */
-
-/*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */
-/* Configuration variable added by yooth. */
-/*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */
-/*
- * BCSRx
- *
- * Board Status and Control Registers
- *
- */
-#define BCSR0 0xFA400000
-#define BCSR1 0xFA400001
-#define BCSR2 0xFA400002
-#define BCSR3 0xFA400003
-
-#define BCSR0_ENMONXCVR 0x01	/* Monitor XVCR Control */
-#define BCSR0_ENNVRAM	0x02	/* CS4# Control */
-#define BCSR0_LED5	0x04	/* LED5 control 0='on' 1='off' */
-#define BCSR0_LED4	0x08	/* LED4 control 0='on' 1='off' */
-#define BCSR0_FULLDPLX	0x10	/* Ethernet XCVR Control */
-#define BCSR0_COLTEST	0x20
-#define BCSR0_ETHLPBK	0x40
-#define BCSR0_ETHEN	0x80
-
-#define BCSR1_PCVCTL7	0x01	/* PC Slot B Control */
-#define BCSR1_PCVCTL6	0x02
-#define BCSR1_PCVCTL5	0x04
-#define BCSR1_PCVCTL4	0x08
-#define BCSR1_IPB5SEL	0x10
-
-#define BCSR1_SMC1CTS	0x40	/* Added by SAM. */
-#define BCSR1_SMC1TRS	0x80	/* Added by SAM. */
-
-#define BCSR2_ENRTCIRQ	0x01	/* Added by SAM. */
-#define BCSR2_ENBRG1	0x04	/* Added by SAM. */
-
-#define BCSR2_ENPA5HDR	0x08	/* USB Control */
-#define BCSR2_ENUSBCLK	0x10
-#define BCSR2_USBPWREN	0x20
-#define BCSR2_USBSPD	0x40
-#define BCSR2_USBSUSP	0x80
-
-#define BCSR3_BWKAPWR	0x01   /* Changed by SAM. Backup battery situation */
-#define BCSR3_IRQRTC	0x02   /* Changed by SAM. NVRAM Battery */
-#define BCSR3_RDY_BSY	0x04   /* Changed by SAM. Flash Operation */
-#define BCSR3_MPLX_LIN	0x08   /* Changed by SAM. Linear or Multiplexed address Mode */
-
-#define BCSR3_D27	0x10	  /* Dip Switch settings */
-#define BCSR3_D26	0x20
-#define BCSR3_D25	0x40
-#define BCSR3_D24	0x80
-
-/*
- * Environment setting
- */
-#define CONFIG_ETHADDR	00:10:EC:00:37:5B
-#define CONFIG_IPADDR	172.16.115.7
-#define CONFIG_SERVERIP 172.16.115.6
-#define CONFIG_ROOTPATH "/workspace/myfilesystem/target/"
-#define CONFIG_BOOTFILE "uImage.rpxusb"
-#define CONFIG_HOSTNAME LITE_H1_DW
-
-#endif	/* __CONFIG_H */
diff --git a/include/configs/quantum.h b/include/configs/quantum.h
deleted file mode 100644
index f3540c1421..0000000000
--- a/include/configs/quantum.h
+++ /dev/null
@@ -1,430 +0,0 @@
-/*
- * (C) Copyright 2003-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * board/config.h - configuration options, board specific
- * changes for 16M board
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#undef CONFIG_MPC860
-#define CONFIG_MPC850		1	/* This is a MPC850 CPU		*/
-#define CONFIG_RPXLITE		1	/* QUANTUM is the RPXlite clone */
-#define CONFIG_RMU		1   /* The QUNATUM is based on our RMU */
-
-#define	CONFIG_SYS_TEXT_BASE	0xfff00000
-
-#define CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
-#undef	CONFIG_8xx_CONS_SMC2
-#undef	CONFIG_8xx_CONS_NONE
-#define CONFIG_BAUDRATE		9600	/* console baudrate = 9600bps	*/
-#if 0
-#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
-#else
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
-#endif
-
-/* default developmenmt environment */
-
-#define CONFIG_ETHADDR 00:0B:17:00:00:00
-
-#define CONFIG_IPADDR  10.10.69.10
-#define CONFIG_SERVERIP 10.10.69.49
-#define CONFIG_NETMASK	255.255.255.0
-#define CONFIG_HOSTNAME QUANTUM
-#define CONFIG_ROOTPATH "/opt/eldk/pcc_8xx"
-
-#define CONFIG_BOOTARGS	 "root=/dev/ram rw"
-
-#define CONFIG_BOOTCOMMAND "bootm ff000000"
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
-    "serial#=12345\0"		\
-	"nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath}\0"	\
-	"ramargs=setenv bootargs root=/dev/ram rw\0" \
-    "addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off\0"
-
-/*
- * Select the more full-featured memory test (Barr embedded systems)
- */
-#define CONFIG_SYS_ALT_MEMTEST
-
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
-
-
-/* M48T02 Paralled access timekeeper with same interface as the M48T35A*/
-#define CONFIG_RTC_M48T35A 1
-
-#if 0
-#define CONFIG_WATCHDOG 1		/* watchdog enabled		*/
-#else
-#undef CONFIG_WATCHDOG
-#endif
-
-/*  NVRAM and RTC */
-#define CONFIG_SYS_NVRAM_BASE_ADDR 0xFA000000
-#define CONFIG_SYS_NVRAM_SIZE 2048
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_SNTP
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-#define CONFIG_AUTOBOOT_KEYED	/* Enable password protection */
-#define CONFIG_AUTOBOOT_PROMPT		\
-	"\nEnter password - autoboot in %d sec...\n", bootdelay
-#define CONFIG_AUTOBOOT_DELAY_STR	"system"
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
-#else
-#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_MEMTEST_START	0x00040000	/* memtest works on	*/
-#define CONFIG_SYS_MEMTEST_END		0x01f00000	/* 256K ... 15 MB in DRAM	*/
-
-#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR		0xFA200000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE	0x2F00	/* Size of used area in DPRAM	*/
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_FLASH_BASE	0xFF000000
-
-#if 1
-    #define CONFIG_FLASH_CFI_DRIVER
-#else
-    #undef CONFIG_FLASH_CFI_DRIVER
-#endif
-
-
-#ifdef CONFIG_FLASH_CFI_DRIVER
-    #define CONFIG_SYS_FLASH_CFI 1
-    #undef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
-    #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE}
-#endif
-
-/*%%% #define CONFIG_SYS_FLASH_BASE		0xFFF00000 */
-#if defined(DEBUG) || defined(CONFIG_CMD_IDE)
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#else
-#define CONFIG_SYS_MONITOR_LEN		(128 << 10)	/* Reserve 128 kB for Monitor	*/
-#endif
-#define CONFIG_SYS_MONITOR_BASE	0xFFF00000
-/*%%% #define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE */
-#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CONFIG_SYS_MAX_FLASH_SECT	512	/* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
-
-#define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_OFFSET	    0x00040000	/*   Offset   of Environment Sector	absolute address 0xfff40000*/
-#define CONFIG_ENV_SECT_SIZE	0x40000	/* Total Size of Environment Sector	*/
-#define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
-
-/* Address and size of Redundant Environment Sector	*/
-#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET+CONFIG_ENV_SIZE)
-#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
-
-/* FPGA */
-#define CONFIG_MISC_INIT_R
-#define CONFIG_SYS_FPGA_SPARTAN2
-#define CONFIG_SYS_FPGA_PROG_FEEDBACK
-
-
-/*-----------------------------------------------------------------------
- * Reset address
- */
-#define CONFIG_SYS_RESET_ADDRESS	((ulong)((((immap_t *)CONFIG_SYS_IMMR)->im_clkrst.res)))
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control				11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
-			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | 0x00000600 | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration				11-6
- *-----------------------------------------------------------------------
- * PCMCIA config., multi-function pin tri-state
- */
-#define CONFIG_SYS_SIUMCR	(SIUMCR_MLRC10)
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control				11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF | TBSCR_TBE)
-
-/*-----------------------------------------------------------------------
- * RTCSC - Real-Time Clock Status and Control Register		11-27
- *-----------------------------------------------------------------------
- */
-/*%%%#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) */
-#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_RTE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control		11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- */
-#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
- *-----------------------------------------------------------------------
- * Reset PLL lock status sticky bit, timer expired status bit and timer
- * interrupt status bit
- *
- * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)!
- */
-/* up to 50 MHz we use a 1:1 clock */
-#define CONFIG_SYS_PLPRCR	( (5 << PLPRCR_MF_SHIFT) | PLPRCR_TEXPS )
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register		15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- */
-#define SCCR_MASK	SCCR_EBDF00
-/* up to 50 MHz we use a 1:1 clock */
-#define CONFIG_SYS_SCCR	(SCCR_COM00 | SCCR_TBS)
-
-/*-----------------------------------------------------------------------
- * PCMCIA stuff
- *-----------------------------------------------------------------------
- *
- */
-#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
-#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
-
-/*-----------------------------------------------------------------------
- * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
- *-----------------------------------------------------------------------
- */
-
-#define CONFIG_IDE_PREINIT	1	/* Use preinit IDE hook */
-#define CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card Adapter */
-
-#undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE	 not supported	*/
-#undef	CONFIG_IDE_LED			/* LED	 for ide not supported	*/
-#undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
-
-#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
-
-#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
-
-#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_PCMCIA_MEM_ADDR
-
-/* Offset for data I/O			*/
-#define CONFIG_SYS_ATA_DATA_OFFSET	(CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
-
-/* Offset for normal register accesses	*/
-#define CONFIG_SYS_ATA_REG_OFFSET	(2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
-
-/* Offset for alternate registers	*/
-#define CONFIG_SYS_ATA_ALT_OFFSET	0x0100
-
-/*-----------------------------------------------------------------------
- *
- *-----------------------------------------------------------------------
- *
- */
-/*#define	CONFIG_SYS_DER 0x2002000F*/
-#define CONFIG_SYS_DER 0
-
-/*
- * Init Memory Controller:
- *
- * BR0 and OR0 (FLASH)
- */
-
-#define FLASH_BASE_PRELIM	0xFE000000	/* FLASH base */
-#define CONFIG_SYS_PRELIM_OR_AM	0xFE000000	/* OR addr mask */
-
-/* FLASH timing: ACS = 0, TRLX = 0, CSNT = 0, SCY = 4, ETHR = 0, BIH = 1 */
-#define CONFIG_SYS_OR_TIMING_FLASH (OR_SCY_4_CLK | OR_BI)
-
-#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE_PRELIM & BR_BA_MSK) | BR_V)
-
-/*
- * BR1 and OR1 (SDRAM)
- *
- */
-#define SDRAM_BASE_PRELIM	0x00000000	/* SDRAM base	*/
-#define SDRAM_MAX_SIZE		0x08000000	/* max 128 MB */
-
-/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-#define CONFIG_SYS_OR_TIMING_SDRAM	0x00000E00
-
-#define CONFIG_SYS_OR1_PRELIM	(0xF0000000 | CONFIG_SYS_OR_TIMING_SDRAM ) /* map 256 MB */
-#define CONFIG_SYS_BR1_PRELIM	((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
-
-/* RPXLITE mem setting */
-#define CONFIG_SYS_BR3_PRELIM	0xFA400001		/* FPGA */
-#define CONFIG_SYS_OR3_PRELIM	0xFFFF8910
-
-#define CONFIG_SYS_BR4_PRELIM	0xFA000401		/* NVRAM&SRAM */
-#define CONFIG_SYS_OR4_PRELIM	0xFFFE0970
-
-/*
- * Memory Periodic Timer Prescaler
- */
-
-/* periodic timer for refresh */
-#define CONFIG_SYS_MAMR_PTA	20
-
-/*
- * Refresh clock Prescalar
- */
-#define CONFIG_SYS_MPTPR	MPTPR_PTP_DIV2
-
-/*
- * MAMR settings for SDRAM
- */
-
-/* 9 column SDRAM */
-#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
-			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
-			 MAMR_RLFA_16X | MAMR_WLFA_16X | MAMR_TLFA_16X)
-
-/*
- * BCSRx
- *
- * Board Status and Control Registers
- *
- */
-
-#define BCSR0 0xFA400000
-#define BCSR1 0xFA400001
-#define BCSR2 0xFA400002
-#define BCSR3 0xFA400003
-
-#define BCSR0_ENMONXCVR 0x01	/* Monitor XVCR Control */
-#define BCSR0_ENNVRAM	0x02	/* CS4# Control */
-#define BCSR0_LED5	0x04	/* LED5 control 0='on' 1='off' */
-#define BCSR0_LED4	0x08	/* LED4 control 0='on' 1='off' */
-#define BCSR0_FULLDPLX	0x10	/* Ethernet XCVR Control */
-#define BCSR0_COLTEST	0x20
-#define BCSR0_ETHLPBK	0x40
-#define BCSR0_ETHEN	0x80
-
-#define BCSR1_PCVCTL7	0x01	/* PC Slot B Control */
-#define BCSR1_PCVCTL6	0x02
-#define BCSR1_PCVCTL5	0x04
-#define BCSR1_PCVCTL4	0x08
-#define BCSR1_IPB5SEL	0x10
-
-#define BCSR2_ENPA5HDR	0x08	/* USB Control */
-#define BCSR2_ENUSBCLK	0x10
-#define BCSR2_USBPWREN	0x20
-#define BCSR2_USBSPD	0x40
-#define BCSR2_USBSUSP	0x80
-
-#define BCSR3_BWRTC	0x01	/* Real Time Clock Battery */
-#define BCSR3_BWNVR	0x02	/* NVRAM Battery */
-#define BCSR3_RDY_BSY	0x04	/* Flash Operation */
-#define BCSR3_RPXL	0x08	/* Reserved (reads back '1') */
-#define BCSR3_D27	0x10	/* Dip Switch settings */
-#define BCSR3_D26	0x20
-#define BCSR3_D25	0x40
-#define BCSR3_D24	0x80
-
-#endif	/* __CONFIG_H */
diff --git a/include/pcmcia.h b/include/pcmcia.h
index 952a67c17c..b0f6b92404 100644
--- a/include/pcmcia.h
+++ b/include/pcmcia.h
@@ -21,10 +21,7 @@
 
 #if !defined(CONFIG_PCMCIA_SLOT_A) && !defined(CONFIG_PCMCIA_SLOT_B)
 
-					/* The RPX series use SLOT_B	*/
-#if defined(CONFIG_RPXLITE)
-# define CONFIG_PCMCIA_SLOT_B
-#elif defined(CONFIG_FADS)		/* The FADS series are a mess	*/
+#if defined(CONFIG_FADS)		/* The FADS series are a mess	*/
 # if defined(CONFIG_MPC86x) || defined(CONFIG_MPC821)
 #  define CONFIG_PCMCIA_SLOT_A
 # else