diff options
| author | Ash Charles <ashcharles@gmail.com> | 2015-04-28 16:17:53 -0700 |
|---|---|---|
| committer | Tom Rini <trini@konsulko.com> | 2015-05-10 07:29:39 -0400 |
| commit | ce170a1c3d7223d678491e4180b088d196379eef (patch) | |
| tree | f303e130ab366a8b38d03049203c493837cd8f71 /include/configs | |
| parent | 2ed43b549b8c40ab372b2be2d6f14be6bf89cb43 (diff) | |
| download | talos-obmc-uboot-ce170a1c3d7223d678491e4180b088d196379eef.tar.gz talos-obmc-uboot-ce170a1c3d7223d678491e4180b088d196379eef.zip | |
omap3: overo: Use software BCH8 ECC for NAND
Overo COMs have NAND flash that requires 4-bit ECC or better except for
the first sector which can use 1-bit ECC. The boot ROM expects to load
a payload from NAND written using 1-bit hardware-based ECC. In short,
write SPL to NAND something like this (4 times for redundancy):
#> nandecc hw
#> nand write ${loadaddr} 0x0 ${filesize}
#> nand write ${loadaddr} 0x20000 ${filesize}
#> nand write ${loadaddr} 0x40000 ${filesize}
#> nand write ${loadaddr} 0x60000 ${filesize}
Then, switch back to software-based BCH8 for everything else:
#> nandecc sw bch8
After [1], enlarge the max size of the SPL so the BCH code can fit.
[1] https://www.mail-archive.com/u-boot@lists.denx.de/msg163912.html
Signed-off-by: Ash Charles <ashcharles@gmail.com>
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/omap3_overo.h | 19 |
1 files changed, 15 insertions, 4 deletions
diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h index c58636a541..61213df9a8 100644 --- a/include/configs/omap3_overo.h +++ b/include/configs/omap3_overo.h @@ -11,6 +11,12 @@ #define CONFIG_NAND #include <configs/ti_omap3_common.h> +#undef CONFIG_SPL_MAX_SIZE +#define CONFIG_SPL_MAX_SIZE (64*1024) +#undef CONFIG_SPL_TEXT_BASE +#define CONFIG_SPL_TEXT_BASE 0x40200000 + +#define CONFIG_BCH /* Display CPU and Board information */ #define CONFIG_DISPLAY_CPUINFO @@ -212,17 +218,22 @@ /* NAND boot config */ #define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16 +#define CONFIG_SYS_NAND_MAX_ECCPOS 56 #define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_PAGE_COUNT 64 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 #define CONFIG_SYS_NAND_OOBSIZE 64 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS -#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\ - 10, 11, 12, 13} +#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, \ + 13, 14, 16, 17, 18, 19, 20, 21, 22, \ + 23, 24, 25, 26, 27, 28, 30, 31, 32, \ + 33, 34, 35, 36, 37, 38, 39, 40, 41, \ + 42, 44, 45, 46, 47, 48, 49, 50, 51, \ + 52, 53, 54, 55, 56} #define CONFIG_SYS_NAND_ECCSIZE 512 -#define CONFIG_SYS_NAND_ECCBYTES 3 -#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW +#define CONFIG_SYS_NAND_ECCBYTES 13 +#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW_DETECTION_SW #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 /* NAND: SPL falcon mode configs */ |
