ARM: Remove apollon board

This board is the only board that still sticks to OneNAND IPL.
Remove this board, since we have SPL around for a while and
OneNAND is well supported in the SPL framework. The board can
be revived if necessary.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Tom Rini <trini@ti.com>

1 files changed, 0 insertions, 261 deletions

diff --git a/include/configs/apollon.h b/include/configs/apollon.h
deleted file mode 100644
index b8ca8a849f..0000000000
--- a/include/configs/apollon.h
+++ /dev/null
@@ -1,261 +0,0 @@
-/*
- * (C) Copyright 2005-2008
- * Samsung Electronics,
- * Kyungmin Park <kyungmin.park@samsung.com>
- *
- * Configuration settings for the 2420 Samsung Apollon board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_ARM1136		1 /* This is an arm1136 CPU core */
-#define CONFIG_OMAP		1 /* in a TI OMAP core */
-#define CONFIG_OMAP2420		1 /* which is in a 2420 */
-#define CONFIG_OMAP2420_APOLLON	1
-#define CONFIG_APOLLON		1
-#define CONFIG_APOLLON_PLUS	1 /* If you have apollon plus 1.x */
-
-#define CONFIG_ONENAND_U_BOOT	y
-
-/* Clock config to target*/
-#define PRCM_CONFIG_I		1
-/* #define PRCM_CONFIG_II	1 */
-
-/* Boot method */
-/* uncomment if you use NOR boot */
-/* #define CONFIG_SYS_NOR_BOOT		1 */
-
-/* uncomment if you use NOR on CS3 */
-/* #define CONFIG_SYS_USE_NOR		1 */
-
-#ifdef CONFIG_SYS_NOR_BOOT
-#undef CONFIG_SYS_USE_NOR
-#define CONFIG_SYS_USE_NOR		1
-#endif
-
-/* uncommnet if you want to use UBI */
-#define CONFIG_SYS_USE_UBI
-
-#include <asm/arch/omap2420.h>	/* get chip and board defs */
-
-#define	V_SCLK	12000000
-
-/* input clock of PLL */
-/* the OMAP2420 H4 has 12MHz, 13MHz, or 19.2Mhz crystal input */
-#define	CONFIG_SYS_CLK_FREQ	V_SCLK
-
-#define	CONFIG_MISC_INIT_R
-
-#define	CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs */
-#define	CONFIG_SETUP_MEMORY_TAGS	1
-#define	CONFIG_INITRD_TAG	1
-#define	CONFIG_REVISION_TAG	1
-
-/*
- * Size of malloc() pool
- */
-#define	CONFIG_ENV_SIZE SZ_128K	/* Total Size of Environment Sector */
-#define CONFIG_ENV_SIZE_FLEX SZ_256K
-#define	CONFIG_SYS_MALLOC_LEN	(CONFIG_ENV_SIZE + SZ_1M)
-
-/*
- * Hardware drivers
- */
-
-/*
- * SMC91c96 Etherent
- */
-#define	CONFIG_LAN91C96
-#define	CONFIG_LAN91C96_BASE	(APOLLON_CS1_BASE+0x300)
-#define	CONFIG_LAN91C96_EXT_PHY
-
-/*
- * NS16550 Configuration
- */
-#define	V_NS16550_CLK	(48000000)	/* 48MHz (APLL96/2) */
-
-#define	CONFIG_SYS_NS16550
-#define	CONFIG_SYS_NS16550_SERIAL
-#define	CONFIG_SYS_NS16550_REG_SIZE	(-4)
-#define	CONFIG_SYS_NS16550_CLK	V_NS16550_CLK	/* 3MHz (1.5MHz*2) */
-#define	CONFIG_SYS_NS16550_COM1	OMAP2420_UART1
-
-/*
- * select serial console configuration
- */
-#define	CONFIG_SERIAL1	1	/* UART1 on H4 */
-
-/* allow to overwrite serial and ethaddr */
-#define	CONFIG_ENV_OVERWRITE
-#define	CONFIG_CONS_INDEX	1
-#define	CONFIG_BAUDRATE		115200
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include	<config_cmd_default.h>
-
-#define	CONFIG_CMD_DHCP
-#define	CONFIG_CMD_DIAG
-#define	CONFIG_CMD_ONENAND
-
-#ifdef CONFIG_SYS_USE_UBI
-#define	CONFIG_CMD_JFFS2
-#define	CONFIG_CMD_UBI
-#define	CONFIG_RBTREE
-#define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
-#define CONFIG_MTD_PARTITIONS
-#endif
-
-#undef	CONFIG_CMD_SOURCE
-
-#ifndef	CONFIG_SYS_USE_NOR
-# undef	CONFIG_CMD_FLASH
-# undef	CONFIG_CMD_IMLS
-#endif
-
-#define	CONFIG_BOOTP_MASK	CONFIG_BOOTP_DEFAULT
-
-#define	CONFIG_BOOTDELAY	1
-
-#define	CONFIG_NETMASK	255.255.255.0
-#define	CONFIG_IPADDR	192.168.116.25
-#define	CONFIG_SERVERIP	192.168.116.1
-#define	CONFIG_BOOTFILE	"uImage"
-#define	CONFIG_ETHADDR	00:0E:99:00:24:20
-
-#ifdef CONFIG_APOLLON_PLUS
-#define CONFIG_SYS_MEM	"mem=64M"
-#else
-#define CONFIG_SYS_MEM	"mem=128"
-#endif
-
-#ifdef CONFIG_SYS_USE_UBI
-#define CONFIG_SYS_UBI "ubi.mtd=4"
-#else
-#define CONFIG_SYS_UBI ""
-#endif
-
-#define CONFIG_BOOTARGS "root=/dev/nfs rw " CONFIG_SYS_MEM \
-	" console=ttyS0,115200n8" \
-	" ip=192.168.116.25:192.168.116.1:192.168.116.1:255.255.255.0:" \
-	"apollon:eth0:off nfsroot=/tftpboot/nfsroot profile=2 " \
-	CONFIG_SYS_UBI
-
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
-	"Image=tftp 0x80008000 Image; go 0x80008000\0"			\
-	"zImage=tftp 0x80180000 zImage; go 0x80180000\0"		\
-	"uImage=tftp 0x80180000 uImage; bootm 0x80180000\0"		\
-	"uboot=tftp 0x80008000 u-boot.bin; go 0x80008000\0"		\
-	"xloader=tftp 0x80180000 x-load.bin; "				\
-	" cp.w 0x80180000 0x00000400 0x1000; go 0x00000400\0"		\
-	"syncmode50=mw.w 0x1e442 0xc0c4; mw 0x6800a060 0xe30d1201\0"	\
-	"syncmode=mw.w 0x1e442 0xe0f4; mw 0x6800a060 0xe30d1201\0"	\
-	"norboot=cp32 0x18040000 0x80008000 0x200000; go 0x80008000\0"	\
-	"oneboot=onenand read 0x80008000 0x40000 0x200000; go 0x80008000\0" \
-	"onesyncboot=run syncmode oneboot\0"				\
-	"updateb=tftp 0x80180000 u-boot-onenand.bin; "			\
-	" onenand erase 0x0 0x20000; onenand write 0x80180000 0x0 0x20000\0" \
-	"ubi=setenv bootargs ${bootargs} ubi.mtd=4 ${mtdparts}; run uImage\0" \
-	"bootcmd=run uboot\0"
-
-/*
- * Miscellaneous configurable options
- */
-#define	CONFIG_SYS_LONGHELP	/* undef to save memory */
-#define	CONFIG_SYS_PROMPT	"Apollon # "
-#define	CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
-/* Print Buffer Size */
-#define	CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define	CONFIG_SYS_MAXARGS	16	/* max number of command args */
-/* Boot Argument Buffer Size */
-#define	CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-/* memtest works on */
-#define	CONFIG_SYS_MEMTEST_START	(OMAP2420_SDRC_CS0)
-#define	CONFIG_SYS_MEMTEST_END		(OMAP2420_SDRC_CS0+SZ_31M)
-
-/* default load address */
-#define	CONFIG_SYS_LOAD_ADDR	(OMAP2420_SDRC_CS0)
-
-/* The 2420 has 12 GP timers, they can be driven by the SysClk (12/13/19.2)
- * or by 32KHz clk, or from external sig. This rate is divided by a local
- * divisor.
- */
-#define	CONFIG_SYS_TIMERBASE	OMAP2420_GPT2
-#define	CONFIG_SYS_PTV		7	/* 2^(PTV+1) */
-#define	CONFIG_SYS_HZ		((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PTV))
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define	CONFIG_NR_DRAM_BANKS	1	/* CS1 may or may not be populated */
-#define	PHYS_SDRAM_1		OMAP2420_SDRC_CS0
-#define	PHYS_SDRAM_1_SIZE	SZ_128M
-#define	PHYS_SDRAM_2		OMAP2420_SDRC_CS1
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#ifdef	CONFIG_SYS_USE_NOR
-/* OneNAND boot, NOR has CS3, But NOR has CS0 when NOR boot */
-# define	CONFIG_SYS_FLASH_BASE		0x18000000
-# define	CONFIG_SYS_MAX_FLASH_BANKS	1
-# define	CONFIG_SYS_MAX_FLASH_SECT	1024
-/*-----------------------------------------------------------------------
- * CFI FLASH driver setup
- */
-/* Flash memory is CFI compliant */
-# define	CONFIG_SYS_FLASH_CFI	1
-# define	CONFIG_FLASH_CFI_DRIVER	1	/* Use drivers/cfi_flash.c */
-/* Use buffered writes (~10x faster) */
-/* #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 */
-/* Use h/w sector protection*/
-# define	CONFIG_SYS_FLASH_PROTECTION	1
-
-#else	/* !CONFIG_SYS_USE_NOR */
-# define	CONFIG_SYS_NO_FLASH	1
-#endif	/* CONFIG_SYS_USE_NOR */
-
-/* OneNAND boot, OneNAND has CS0, NOR boot ONeNAND has CS2 */
-#define	CONFIG_SYS_ONENAND_BASE	0x00000000
-#define CONFIG_SYS_MONITOR_LEN		SZ_256K	/* U-Boot image size */
-#define	CONFIG_ENV_IS_IN_ONENAND	1
-#define CONFIG_ENV_ADDR		0x00020000
-#define CONFIG_ENV_ADDR_FLEX	0x00040000
-
-#ifdef CONFIG_SYS_USE_UBI
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT		"onenand0=onenand"
-#define MTDPARTS_DEFAULT	"mtdparts=onenand:128k(bootloader),"	\
-					"128k(params),"			\
-					"2m(kernel),"			\
-					"16m(rootfs),"			\
-					"32m(fs),"			\
-					"-(ubifs)"
-#endif
-
-#define PHYS_SRAM			0x4020F800
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR 	PHYS_SRAM
-
-#endif /* __CONFIG_H */