zynq-common: Rename zynq with zynq-common

zynq.h -> zynq-common.h, zynq-common is Common
configuration options for all Zynq boards.

zynq.h is no longer exists hense removed from boards.cfg

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>

1 files changed, 0 insertions, 173 deletions

diff --git a/include/configs/zynq.h b/include/configs/zynq.h
deleted file mode 100644
index ea25159a20..0000000000
--- a/include/configs/zynq.h
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
- * (C) Copyright 2012 Michal Simek <monstr@monstr.eu>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_ZYNQ_H
-#define __CONFIG_ZYNQ_H
-
-/* High Level configuration Options */
-#define CONFIG_ARMV7
-#define CONFIG_ZYNQ
-
-/* CPU clock */
-#ifndef CONFIG_CPU_FREQ_HZ
-# define CONFIG_CPU_FREQ_HZ	800000000
-#endif
-
-/* Cache options */
-#define CONFIG_CMD_CACHE
-#define CONFIG_SYS_CACHELINE_SIZE	32
-
-#define CONFIG_SYS_L2CACHE_OFF
-#ifndef CONFIG_SYS_L2CACHE_OFF
-# define CONFIG_SYS_L2_PL310
-# define CONFIG_SYS_PL310_BASE		0xf8f02000
-#endif
-
-/* Serial drivers */
-#define CONFIG_BAUDRATE		115200
-/* The following table includes the supported baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE  \
-	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
-
-/* Zynq Serial driver */
-#define CONFIG_ZYNQ_SERIAL_UART1
-#ifdef CONFIG_ZYNQ_SERIAL_UART0
-# define CONFIG_ZYNQ_SERIAL_BASEADDR0	0xE0000000
-# define CONFIG_ZYNQ_SERIAL_BAUDRATE0	CONFIG_BAUDRATE
-# define CONFIG_ZYNQ_SERIAL_CLOCK0	50000000
-#endif
-
-#ifdef CONFIG_ZYNQ_SERIAL_UART1
-# define CONFIG_ZYNQ_SERIAL_BASEADDR1	0xE0001000
-# define CONFIG_ZYNQ_SERIAL_BAUDRATE1	CONFIG_BAUDRATE
-# define CONFIG_ZYNQ_SERIAL_CLOCK1	50000000
-#endif
-
-#if defined(CONFIG_ZYNQ_SERIAL_UART0) || defined(CONFIG_ZYNQ_SERIAL_UART1)
-# define CONFIG_ZYNQ_SERIAL
-#endif
-
-/* DCC driver */
-#if defined(CONFIG_ZYNQ_DCC)
-# define CONFIG_ARM_DCC
-# define CONFIG_CPU_V6 /* Required by CONFIG_ARM_DCC */
-#endif
-
-/* Ethernet driver */
-#define CONFIG_ZYNQ_GEM0
-#define CONFIG_ZYNQ_GEM_PHY_ADDR0	7
-#if defined(CONFIG_ZYNQ_GEM0) || defined(CONFIG_ZYNQ_GEM1)
-# define CONFIG_NET_MULTI
-# define CONFIG_ZYNQ_GEM
-# define CONFIG_MII
-# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-# define CONFIG_PHYLIB
-# define CONFIG_PHY_MARVELL
-#endif
-
-#define CONFIG_ZYNQ_SPI
-/* SPI */
-#ifdef CONFIG_ZYNQ_SPI
-# define CONFIG_SPI_FLASH
-# define CONFIG_SPI_FLASH_SST
-# define CONFIG_CMD_SF
-#endif
-
-/* NOR */
-#define CONFIG_SYS_NO_FLASH
-
-#define CONFIG_ZYNQ_SDHCI0
-/* MMC */
-#if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1)
-# define CONFIG_MMC
-# define CONFIG_GENERIC_MMC
-# define CONFIG_SDHCI
-# define CONFIG_ZYNQ_SDHCI
-# define CONFIG_CMD_MMC
-# define CONFIG_CMD_FAT
-# define CONFIG_SUPPORT_VFAT
-# define CONFIG_CMD_EXT2
-# define CONFIG_DOS_PARTITION
-#endif
-
-#define CONFIG_ZYNQ_I2C0
-/* I2C */
-#if defined(CONFIG_ZYNQ_I2C0) || defined(CONFIG_ZYNQ_I2C1)
-# define CONFIG_CMD_I2C
-# define CONFIG_SYS_I2C
-# define CONFIG_SYS_I2C_ZYNQ
-# define CONFIG_SYS_I2C_ZYNQ_SPEED		100000
-# define CONFIG_SYS_I2C_ZYNQ_SLAVE		1
-#endif
-
-#define CONFIG_BOOTP_SERVERIP
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_MAY_FAIL
-
-/* Environment */
-#define CONFIG_ENV_SIZE		0x10000 /* Env. sector size */
-#define CONFIG_ENV_IS_NOWHERE
-#define CONFIG_SYS_LOAD_ADDR	0
-
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_PROMPT		"zynq-uboot> "
-#define CONFIG_SYS_HUSH_PARSER
-
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_MAXARGS		15 /* max number of command args */
-#define CONFIG_SYS_CBSIZE		256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					sizeof(CONFIG_SYS_PROMPT) + 16)
-
-/* Physical Memory map */
-#define CONFIG_SYS_TEXT_BASE		0
-
-#define CONFIG_NR_DRAM_BANKS		1
-#define CONFIG_SYS_SDRAM_BASE		0
-#define CONFIG_SYS_SDRAM_SIZE		0x40000000
-
-#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x1000)
-
-#define CONFIG_SYS_MALLOC_LEN		0x400000
-#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_INIT_RAM_SIZE	CONFIG_SYS_MALLOC_LEN
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
-					CONFIG_SYS_INIT_RAM_SIZE - \
-					GENERATED_GBL_DATA_SIZE)
-
-/* Enable the PL to be downloaded */
-#define CONFIG_FPGA
-#define CONFIG_FPGA_XILINX
-#define CONFIG_FPGA_ZYNQPL
-#define CONFIG_CMD_FPGA
-
-/* Open Firmware flat tree */
-#define CONFIG_OF_LIBFDT
-
-/* FIT support */
-#define CONFIG_FIT
-#define CONFIG_FIT_VERBOSE	1 /* enable fit_format_{error,warning}() */
-
-/* Boot FreeBSD/vxWorks from an ELF image */
-#if defined(CONFIG_ZYNQ_BOOT_FREEBSD)
-# define CONFIG_API
-# define CONFIG_CMD_ELF
-# define CONFIG_SYS_MMC_MAX_DEVICE	1
-#endif
-
-/* Commands */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
-
-#endif /* __CONFIG_ZYNQ_H */