Coding style cleanup

1 files changed, 56 insertions, 56 deletions

diff --git a/include/configs/walnut.h b/include/configs/walnut.h
index ac5b530934..3a8e61c087 100644
--- a/include/configs/walnut.h
+++ b/include/configs/walnut.h
@@ -34,21 +34,21 @@
  */
 
 #define CONFIG_405GP		1	/* This is a PPC405 CPU		*/
-#define CONFIG_4xx		1	/* ...member of PPC4xx family   */
-#define CONFIG_WALNUT	        1	/* ...on a WALNUT board	        */
-                                   	/* ...and on a SYCAMORE board   */
+#define CONFIG_4xx		1	/* ...member of PPC4xx family	*/
+#define CONFIG_WALNUT		1	/* ...on a WALNUT board		*/
+					/* ...and on a SYCAMORE board	*/
 
 #define CONFIG_BOARD_EARLY_INIT_F 1	/* Call board_early_init_f	*/
 
-#define CONFIG_SYS_CLK_FREQ     33333333 /* external frequency to pll   */
+#define CONFIG_SYS_CLK_FREQ	33333333 /* external frequency to pll	*/
 
-#define CONFIG_PREBOOT	"echo;"	\
+#define CONFIG_PREBOOT	"echo;" \
 	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
 	"echo"
 
 #undef	CONFIG_BOOTARGS
 
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
+#define CONFIG_EXTRA_ENV_SETTINGS					\
 	"netdev=eth0\0"							\
 	"hostname=walnut\0"						\
 	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
@@ -62,15 +62,15 @@
 		"bootm $(kernel_addr)\0"				\
 	"flash_self=run ramargs addip addtty;"				\
 		"bootm $(kernel_addr) $(ramdisk_addr)\0"		\
-	"net_nfs=tftp 200000 $(bootfile);run nfsargs addip addtty;"     \
-	        "bootm\0"						\
+	"net_nfs=tftp 200000 $(bootfile);run nfsargs addip addtty;"	\
+		"bootm\0"						\
 	"rootpath=/opt/eldk/ppc_4xx\0"					\
 	"bootfile=/tftpboot/walnut/uImage\0"				\
 	"kernel_addr=fff80000\0"					\
 	"ramdisk_addr=fff80000\0"					\
 	"load=tftp 100000 /tftpboot/walnut/u-boot.bin\0"		\
 	"update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;"	\
-		"cp.b 100000 fffc0000 40000;"			        \
+		"cp.b 100000 fffc0000 40000;"				\
 		"setenv filesize;saveenv\0"				\
 	"upd=run load;run update\0"					\
 	""
@@ -88,7 +88,7 @@
 #define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
 #define CONFIG_MII		1	/* MII PHY management		*/
-#define	CONFIG_PHY_ADDR		1	/* PHY address			*/
+#define CONFIG_PHY_ADDR		1	/* PHY address			*/
 
 #define CONFIG_RTC_DS174x	1	/* use DS1743 RTC in Walnut	*/
 
@@ -105,7 +105,7 @@
 				CFG_CMD_NFS	| \
 				CFG_CMD_PCI	| \
 				CFG_CMD_PING	| \
-				CFG_CMD_REGINFO	| \
+				CFG_CMD_REGINFO | \
 				CFG_CMD_SDRAM	| \
 				CFG_CMD_SNTP	)
 
@@ -122,9 +122,9 @@
 #define CFG_LONGHELP			/* undef to save memory		*/
 #define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
 #define CFG_MAXARGS	16		/* max number of command args	*/
@@ -143,9 +143,9 @@
  * set Linux BASE_BAUD to 403200.
  */
 #undef	CONFIG_SERIAL_SOFTWARE_FIFO
-#undef  CFG_EXT_SERIAL_CLOCK           /* external serial clock */
-#undef  CFG_405_UART_ERRATA_59         /* 405GP/CR Rev. D silicon */
-#define CFG_BASE_BAUD       691200
+#undef	CFG_EXT_SERIAL_CLOCK	       /* external serial clock */
+#undef	CFG_405_UART_ERRATA_59	       /* 405GP/CR Rev. D silicon */
+#define CFG_BASE_BAUD	    691200
 
 /* The following table includes the supported baudrates */
 #define CFG_BAUDRATE_TABLE  \
@@ -154,10 +154,10 @@
 #define CFG_LOAD_ADDR		0x100000	/* default load address */
 #define CFG_EXTBDINFO		1	/* To use extended board_into (bd_t) */
 
-#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
 
-#define CONFIG_AUTO_COMPLETE	1       /* add autocompletion support   */
-#define CONFIG_LOOPW            1       /* enable loopw command         */
+#define CONFIG_AUTO_COMPLETE	1	/* add autocompletion support	*/
+#define CONFIG_LOOPW		1	/* enable loopw command		*/
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
 #define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
 
@@ -168,7 +168,7 @@
  *-----------------------------------------------------------------------
  */
 #define CONFIG_HARD_I2C		1	/* I2C with hardware support	*/
-#undef  CONFIG_SOFT_I2C			/* I2C bit-banged		*/
+#undef	CONFIG_SOFT_I2C			/* I2C bit-banged		*/
 #define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
 #define CFG_I2C_SLAVE		0x7F
 
@@ -176,24 +176,24 @@
  * PCI stuff
  *-----------------------------------------------------------------------
  */
-#define PCI_HOST_ADAPTER 0              /* configure ar pci adapter     */
-#define PCI_HOST_FORCE  1               /* configure as pci host        */
-#define PCI_HOST_AUTO   2               /* detected via arbiter enable  */
-
-#define CONFIG_PCI			/* include pci support	        */
-#define CONFIG_PCI_HOST	PCI_HOST_FORCE  /* select pci host function     */
-#define CONFIG_PCI_PNP			/* do pci plug-and-play         */
-					/* resource configuration       */
+#define PCI_HOST_ADAPTER 0		/* configure ar pci adapter	*/
+#define PCI_HOST_FORCE	1		/* configure as pci host	*/
+#define PCI_HOST_AUTO	2		/* detected via arbiter enable	*/
+
+#define CONFIG_PCI			/* include pci support		*/
+#define CONFIG_PCI_HOST PCI_HOST_FORCE	/* select pci host function	*/
+#define CONFIG_PCI_PNP			/* do pci plug-and-play		*/
+					/* resource configuration	*/
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup	*/
 
 #define CFG_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC */
 #define CFG_PCI_SUBSYS_DEVICEID 0xcafe	/* Whatever */
-#define CFG_PCI_PTM1LA  0x00000000      /* point to sdram               */
-#define CFG_PCI_PTM1MS  0x80000001      /* 2GB, enable hard-wired to 1  */
-#define CFG_PCI_PTM1PCI 0x00000000      /* Host: use this pci address   */
-#define CFG_PCI_PTM2LA  0x00000000      /* disabled                     */
-#define CFG_PCI_PTM2MS  0x00000000      /* disabled                     */
-#define CFG_PCI_PTM2PCI 0x04000000      /* Host: use this pci address   */
+#define CFG_PCI_PTM1LA	0x00000000	/* point to sdram		*/
+#define CFG_PCI_PTM1MS	0x80000001	/* 2GB, enable hard-wired to 1	*/
+#define CFG_PCI_PTM1PCI 0x00000000	/* Host: use this pci address	*/
+#define CFG_PCI_PTM2LA	0x00000000	/* disabled			*/
+#define CFG_PCI_PTM2MS	0x00000000	/* disabled			*/
+#define CFG_PCI_PTM2PCI 0x04000000	/* Host: use this pci address	*/
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
@@ -209,10 +209,10 @@
 /*
  * Define here the location of the environment variables (FLASH or NVRAM).
  * Note: DENX encourages to use redundant environment in FLASH. NVRAM is only
- *       supported for backward compatibility.
+ *	 supported for backward compatibility.
  */
 #if 1
-#define CFG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
+#define CFG_ENV_IS_IN_FLASH	1	/* use FLASH for environment vars	*/
 #else
 #define CFG_ENV_IS_IN_NVRAM	1	/* use NVRAM for environment vars	*/
 #endif
@@ -227,8 +227,8 @@
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define FLASH_BASE0_PRELIM	CFG_FLASH_BASE	/* FLASH bank #0	        */
-#define FLASH_BASE1_PRELIM	0	        /* FLASH bank #1	        */
+#define FLASH_BASE0_PRELIM	CFG_FLASH_BASE	/* FLASH bank #0		*/
+#define FLASH_BASE1_PRELIM	0		/* FLASH bank #1		*/
 
 #define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
 #define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
@@ -238,14 +238,14 @@
 
 #define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
-#define CFG_FLASH_ADDR0         0x5555
-#define CFG_FLASH_ADDR1         0x2aaa
-#define CFG_FLASH_WORD_SIZE     unsigned char
+#define CFG_FLASH_ADDR0		0x5555
+#define CFG_FLASH_ADDR1		0x2aaa
+#define CFG_FLASH_WORD_SIZE	unsigned char
 
 #ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE	0x10000 	/* size of one complete sector	*/
+#define CFG_ENV_SECT_SIZE	0x10000		/* size of one complete sector	*/
 #define CFG_ENV_ADDR		(CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
-#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+#define CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
 #define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
@@ -280,44 +280,44 @@
 
 /* Memory Bank 0 (Flash Bank 0) initialization					*/
 #define CFG_EBC_PB0AP		0x9B015480
-#define CFG_EBC_PB0CR		0xFFF18000  /* BAS=0xFFF,BS=1MB,BU=R/W,BW=8bit  */
+#define CFG_EBC_PB0CR		0xFFF18000  /* BAS=0xFFF,BS=1MB,BU=R/W,BW=8bit	*/
 
 #define CFG_EBC_PB1AP		0x02815480
-#define CFG_EBC_PB1CR		0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit  */
+#define CFG_EBC_PB1CR		0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/
 
 #define CFG_EBC_PB2AP		0x04815A80
-#define CFG_EBC_PB2CR		0xF0118000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=8bit  */
+#define CFG_EBC_PB2CR		0xF0118000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=8bit	*/
 
 #define CFG_EBC_PB3AP		0x01815280
-#define CFG_EBC_PB3CR		0xF0218000  /* BAS=0xF02,BS=1MB,BU=R/W,BW=8bit  */
+#define CFG_EBC_PB3CR		0xF0218000  /* BAS=0xF02,BS=1MB,BU=R/W,BW=8bit	*/
 
 #define CFG_EBC_PB7AP		0x01815280
-#define CFG_EBC_PB7CR		0xF0318000  /* BAS=0xF03,BS=1MB,BU=R/W,BW=8bit  */
+#define CFG_EBC_PB7CR		0xF0318000  /* BAS=0xF03,BS=1MB,BU=R/W,BW=8bit	*/
 
 /*-----------------------------------------------------------------------
  * External peripheral base address
  *-----------------------------------------------------------------------
  */
-#define	CFG_KEY_REG_BASE_ADDR	0xF0100000
-#define	CFG_IR_REG_BASE_ADDR	0xF0200000
-#define	CFG_FPGA_REG_BASE_ADDR	0xF0300000
+#define CFG_KEY_REG_BASE_ADDR	0xF0100000
+#define CFG_IR_REG_BASE_ADDR	0xF0200000
+#define CFG_FPGA_REG_BASE_ADDR	0xF0300000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area
  */
-#define CFG_INIT_DCACHE_CS      4       /* use cs # 4 for data cache memory    */
+#define CFG_INIT_DCACHE_CS	4	/* use cs # 4 for data cache memory    */
 
-#define CFG_INIT_RAM_ADDR       0x40000000  /* inside of SDRAM                     */
-#define CFG_INIT_RAM_END        0x2000  /* End of used area in RAM             */
+#define CFG_INIT_RAM_ADDR	0x40000000  /* inside of SDRAM			   */
+#define CFG_INIT_RAM_END	0x2000	/* End of used area in RAM	       */
 #define CFG_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
 #define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET      CFG_GBL_DATA_OFFSET
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Definitions for Serial Presence Detect EEPROM address
  * (to get SDRAM settings)
  */
-#define SPD_EEPROM_ADDRESS      0x50
+#define SPD_EEPROM_ADDRESS	0x50
 
 /*
  * Internal Definitions