arm: socfpga: Split SoCFPGA configuration

Split the SoCFPGA configuration into SoC-specific part which is
common for all boards (socfpga_cyclone5_common.h) and a board
specific part. There is currently only one board, which is the
generic SoCFPGA board (socfpga_cyclone5.h), but there are more
to come.

This is necessary due to various features of the boards, which
unfortunatelly cannot be autodetected.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@altera.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Tom Rini <trini@ti.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Pavel Machek <pavel@denx.de>
Acked-by: Pavel Machek <pavel@denx.de>

1 files changed, 11 insertions, 200 deletions

diff --git a/include/configs/socfpga_cyclone5.h b/include/configs/socfpga_cyclone5.h
index 5349a359f6..34d9cf6134 100644
--- a/include/configs/socfpga_cyclone5.h
+++ b/include/configs/socfpga_cyclone5.h
@@ -1,26 +1,16 @@
 /*
- * Copyright (C) 2012 Altera Corporation <www.altera.com>
+ * Copyright (C) 2014 Marek Vasut <marex@denx.de>
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
-#ifndef __CONFIG_SOCFPGA_CYCLONE5_COMMON_H__
-#define __CONFIG_SOCFPGA_CYCLONE5_COMMON_H__
+#ifndef __CONFIG_SOCFPGA_CYCLONE5_H__
+#define __CONFIG_SOCFPGA_CYCLONE5_H__
 
 #include <asm/arch/socfpga_base_addrs.h>
 #include "../../board/altera/socfpga/pinmux_config.h"
 #include "../../board/altera/socfpga/iocsr_config.h"
 #include "../../board/altera/socfpga/pll_config.h"
 
-#define CONFIG_SYS_GENERIC_BOARD
-
-/* Virtual target or real hardware */
-#undef CONFIG_SOCFPGA_VIRTUAL_TARGET
-
-#define CONFIG_ARMV7
-#define CONFIG_SYS_THUMB_BUILD
-
-#define CONFIG_SOCFPGA
-
 /* U-Boot Commands */
 #define CONFIG_SYS_NO_FLASH
 #include <config_cmd_default.h>
@@ -45,44 +35,8 @@
 
 #define CONFIG_REGEX			/* Enable regular expression support */
 
-/*
- * High level configuration
- */
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_MISC_INIT_R
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_CLOCKS
-
-#define CONFIG_FIT
-#define CONFIG_OF_LIBFDT
-#define CONFIG_SYS_BOOTMAPSZ		(64 * 1024 * 1024)
-
-#define CONFIG_TIMESTAMP		/* Print image info with timestamp */
-
-/*
- * Memory configurations
- */
+/* Memory configurations */
 #define PHYS_SDRAM_1_SIZE		0x40000000	/* 1GiB on SoCDK */
-#define CONFIG_NR_DRAM_BANKS		1
-#define PHYS_SDRAM_1			0x0
-#define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)
-#define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM_1
-#define CONFIG_SYS_MEMTEST_END		PHYS_SDRAM_1_SIZE
-
-#define CONFIG_SYS_INIT_RAM_ADDR	0xFFFF0000
-#define CONFIG_SYS_INIT_RAM_SIZE	(0x10000 - 0x100)
-#define CONFIG_SYS_INIT_SP_ADDR					\
-	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE -	\
-	GENERATED_GBL_DATA_SIZE)
-
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
-#define CONFIG_SYS_TEXT_BASE		0x08000040
-#else
-#define CONFIG_SYS_TEXT_BASE		0x01000040
-#endif
 
 /* Booting Linux */
 #define CONFIG_BOOTDELAY	3
@@ -96,42 +50,8 @@
 #define CONFIG_LOADADDR		0x8000
 #define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
 
-/*
- * U-Boot general configurations
- */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_CBSIZE	1024		/* Console I/O buffer size */
-#define CONFIG_SYS_PBSIZE	\
-	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-						/* Print buffer size */
-#define CONFIG_SYS_MAXARGS	32		/* Max number of command args */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-						/* Boot argument buffer size */
-#define CONFIG_VERSION_VARIABLE			/* U-BOOT version */
-#define CONFIG_AUTO_COMPLETE			/* Command auto complete */
-#define CONFIG_CMDLINE_EDITING			/* Command history etc */
-#define CONFIG_SYS_HUSH_PARSER
-
-/*
- * Cache
- */
-#define CONFIG_SYS_ARM_CACHE_WRITEALLOC
-#define CONFIG_SYS_CACHELINE_SIZE 32
-#define CONFIG_SYS_L2_PL310
-#define CONFIG_SYS_PL310_BASE		SOCFPGA_MPUL2_ADDRESS
-
-/*
- * Ethernet on SoC (EMAC)
- */
-#if defined(CONFIG_CMD_NET) && !defined(CONFIG_SOCFPGA_VIRTUAL_TARGET)
-#define CONFIG_DESIGNWARE_ETH
-#define CONFIG_NET_MULTI
-#define CONFIG_DW_ALTDESCRIPTOR
-#define CONFIG_MII
-#define CONFIG_AUTONEG_TIMEOUT		(15 * CONFIG_SYS_HZ)
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_GIGE
-
+/* Ethernet on SoC (EMAC) */
+#if defined(CONFIG_CMD_NET)
 #define CONFIG_EMAC_BASE		SOCFPGA_EMAC0_ADDRESS
 #define CONFIG_PHY_INTERFACE_MODE	PHY_INTERFACE_MODE_RGMII
 #define CONFIG_EPHY0_PHY_ADDR		0
@@ -147,92 +67,8 @@
 
 #endif
 
-/*
- * FPGA Driver
- */
-#ifdef CONFIG_CMD_FPGA
-#define CONFIG_FPGA
-#define CONFIG_FPGA_ALTERA
-#define CONFIG_FPGA_SOCFPGA
-#define CONFIG_FPGA_COUNT		1
-#endif
-
-/*
- * L4 OSC1 Timer 0
- */
-/* This timer uses eosc1, whose clock frequency is fixed at any condition. */
-#define CONFIG_SYS_TIMERBASE		SOCFPGA_OSC1TIMER0_ADDRESS
-#define CONFIG_SYS_TIMER_COUNTS_DOWN
-#define CONFIG_SYS_TIMER_COUNTER	(CONFIG_SYS_TIMERBASE + 0x4)
-#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
-#define CONFIG_SYS_TIMER_RATE		2400000
-#else
-#define CONFIG_SYS_TIMER_RATE		25000000
-#endif
-
-/*
- * L4 Watchdog
- */
-#ifdef CONFIG_HW_WATCHDOG
-#define CONFIG_DESIGNWARE_WATCHDOG
-#define CONFIG_DW_WDT_BASE		SOCFPGA_L4WD0_ADDRESS
-#define CONFIG_DW_WDT_CLOCK_KHZ		25000
-#define CONFIG_HW_WATCHDOG_TIMEOUT_MS	12000
-#endif
-
-/*
- * MMC Driver
- */
-#ifdef CONFIG_CMD_MMC
-#define CONFIG_MMC
-#define CONFIG_BOUNCE_BUFFER
-#define CONFIG_GENERIC_MMC
-#define CONFIG_DWMMC
-#define CONFIG_SOCFPGA_DWMMC
-#define CONFIG_SOCFPGA_DWMMC_FIFO_DEPTH	1024
-#define CONFIG_SOCFPGA_DWMMC_DRVSEL	3
-#define CONFIG_SOCFPGA_DWMMC_SMPSEL	0
-/* FIXME */
-/* using smaller max blk cnt to avoid flooding the limited stack we have */
-#define CONFIG_SYS_MMC_MAX_BLK_COUNT	256	/* FIXME -- SPL only? */
-#endif
-
-/*
- * Serial Driver
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	-4
-#define CONFIG_SYS_NS16550_COM1		SOCFPGA_UART0_ADDRESS
-#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
-#define CONFIG_SYS_NS16550_CLK		1000000
-#else
-#define CONFIG_SYS_NS16550_CLK		100000000
-#endif
-#define CONFIG_CONS_INDEX		1
-#define CONFIG_BAUDRATE			115200
-
-/*
- * USB
- * Ungate USB:
- * mw 0xffd05014 0x01bef032
- */
-#ifdef CONFIG_CMD_USB
-#define CONFIG_USB_DWC2_OTG
-/*#define CONFIG_USB_DWC2_REG_ADDR 0xffb00000*/
-#define CONFIG_USB_DWC2_REG_ADDR 0xffb40000
-#define CONFIG_USB_STORAGE
-#endif
-
-/*
- * U-Boot environment
- */
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
-#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE
-#define CONFIG_ENV_IS_NOWHERE
-#define CONFIG_ENV_SIZE			4096
-#define CONFIG_HOSTNAME			socfpga_cyclone5
+/* Extra Environment */
+#define CONFIG_HOSTNAME		socfpga_cyclone5
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"verify=n\0" \
@@ -257,32 +93,7 @@
 		" root=${qspiroot} rw rootfstype=${qspirootfstype};"\
 		"bootm ${loadaddr} - ${fdt_addr}\0"
 
-/*
- * SPL
- */
-#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_BOARD_INIT
-#define CONFIG_SPL_RAM_DEVICE
-#define CONFIG_SPL_TEXT_BASE		0xFFFF0000
-#define CONFIG_SPL_STACK		CONFIG_SYS_INIT_SP_ADDR
-#define CONFIG_SPL_STACK_SIZE		(4 * 1024)
-#define CONFIG_SPL_MALLOC_SIZE		(5 * 1024)	/* FIXME */
-#define CONFIG_SYS_SPL_MALLOC_START	((unsigned long) (&__malloc_start))
-#define CONFIG_SYS_SPL_MALLOC_SIZE	(&__malloc_end - &__malloc_start)
-
-#define CHUNKSZ_CRC32			(1 * 1024)	/* FIXME: ewww */
-#define CONFIG_CRC32_VERIFY
-
-/* Linker script for SPL */
-#define CONFIG_SPL_LDSCRIPT	"arch/arm/cpu/armv7/socfpga/u-boot-spl.lds"
-
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_WATCHDOG_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-
-#ifdef CONFIG_SPL_BUILD
-#undef CONFIG_PARTITIONS
-#endif
+/* The rest of the configuration is shared */
+#include <configs/socfpga_common.h>
 
-#endif	/* __CONFIG_SOCFPGA_CYCLONE5_COMMON_H__ */
+#endif	/* __CONFIG_SOCFPGA_CYCLONE5_H__ */