ARM: remove broken "edb93xx" boards

Remove edb9301, edb9302, edb9302a, edb9307, edb9307a, edb9312,
edb9315 and edb9315a boards.

Signed-off-by: Wolfgang Denk <wd@denx.de>

1 files changed, 0 insertions, 269 deletions

diff --git a/include/configs/edb93xx.h b/include/configs/edb93xx.h
deleted file mode 100644
index 19b76321e6..0000000000
--- a/include/configs/edb93xx.h
+++ /dev/null
@@ -1,269 +0,0 @@
-/*
- * U-boot - Configuration file for Cirrus Logic EDB93xx boards
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#ifdef CONFIG_edb9301
-#define CONFIG_EDB9301
-#elif defined(CONFIG_edb9302)
-#define CONFIG_EDB9302
-#elif defined(CONFIG_edb9302a)
-#define CONFIG_EDB9302A
-#elif defined(CONFIG_edb9307)
-#define CONFIG_EDB9307
-#elif defined(CONFIG_edb9307a)
-#define CONFIG_EDB9307A
-#elif defined(CONFIG_edb9312)
-#define CONFIG_EDB9312
-#elif defined(CONFIG_edb9315)
-#define CONFIG_EDB9315
-#elif defined(CONFIG_edb9315a)
-#define CONFIG_EDB9315A
-#else
-#error "no board defined"
-#endif
-
-/* Initial environment and monitor configuration options. */
-#define CONFIG_BOOTDELAY		2
-#define CONFIG_CMDLINE_TAG		1
-#define CONFIG_INITRD_TAG		1
-#define CONFIG_SETUP_MEMORY_TAGS	1
-#define CONFIG_BOOTARGS		"root=/dev/nfs console=ttyAM0,115200 ip=dhcp"
-#define CONFIG_BOOTFILE		"edb93xx.img"
-
-#define CONFIG_SYS_HUSH_PARSER		1
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
-
-#ifdef CONFIG_EDB9301
-#define CONFIG_EP9301
-#define CONFIG_MACH_TYPE		MACH_TYPE_EDB9301
-#define CONFIG_SYS_PROMPT		"EDB9301> "
-#define CONFIG_ENV_SECT_SIZE		0x00020000
-#elif defined(CONFIG_EDB9302)
-#define CONFIG_EP9302
-#define CONFIG_MACH_TYPE		MACH_TYPE_EDB9302
-#define CONFIG_SYS_PROMPT		"EDB9302> "
-#define CONFIG_ENV_SECT_SIZE		0x00020000
-#elif defined(CONFIG_EDB9302A)
-#define CONFIG_EP9302
-#define CONFIG_MACH_TYPE		MACH_TYPE_EDB9302A
-#define CONFIG_SYS_PROMPT		"EDB9302A> "
-#define CONFIG_ENV_SECT_SIZE		0x00020000
-#elif defined(CONFIG_EDB9307)
-#define CONFIG_EP9307
-#define CONFIG_MACH_TYPE		MACH_TYPE_EDB9307
-#define CONFIG_SYS_PROMPT		"EDB9307> "
-#define CONFIG_ENV_SECT_SIZE		0x00040000
-#elif defined(CONFIG_EDB9307A)
-#define CONFIG_EP9307
-#define CONFIG_MACH_TYPE		MACH_TYPE_EDB9307A
-#define CONFIG_SYS_PROMPT		"EDB9307A> "
-#define CONFIG_ENV_SECT_SIZE		0x00040000
-#elif defined(CONFIG_EDB9312)
-#define CONFIG_EP9312
-#define CONFIG_MACH_TYPE		MACH_TYPE_EDB9312
-#define CONFIG_SYS_PROMPT		"EDB9312> "
-#define CONFIG_ENV_SECT_SIZE		0x00040000
-#elif defined(CONFIG_EDB9315)
-#define CONFIG_EP9315
-#define CONFIG_MACH_TYPE		MACH_TYPE_EDB9315
-#define CONFIG_SYS_PROMPT		"EDB9315> "
-#define CONFIG_ENV_SECT_SIZE		0x00040000
-#elif defined(CONFIG_EDB9315A)
-#define CONFIG_EP9315
-#define CONFIG_MACH_TYPE		MACH_TYPE_EDB9315A
-#define CONFIG_SYS_PROMPT		"EDB9315A> "
-#define CONFIG_ENV_SECT_SIZE		0x00040000
-#else
-#error "no board defined"
-#endif
-
-/* High-level configuration options */
-#define CONFIG_ARM920T		1		/* This is an ARM920T core... */
-#define CONFIG_EP93XX 		1		/* in a Cirrus Logic 93xx SoC */
-
-#define CONFIG_SYS_CLK_FREQ	14745600	/* EP93xx has a 14.7456 clock */
-#define CONFIG_SYS_HZ		1000		/* decr freq: 1 ms ticks      */
-#undef  CONFIG_USE_IRQ				/* Don't need IRQ/FIQ         */
-
-/* Monitor configuration */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_SETGETDCR
-#undef CONFIG_CMD_XIMG
-
-#undef CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_JFFS2
-
-#define CONFIG_SYS_LONGHELP			/* Enable "long" help in mon */
-#define CONFIG_SYS_CBSIZE		1024	/* Console I/O buffer size */
-/* Print buffer size */
-#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-/* Boot argument buffer size */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_MAXARGS	16		/* Max number of command args */
-
-/* Serial port hardware configuration */
-#define CONFIG_PL010_SERIAL
-#define CONFIG_CONS_INDEX		0
-#define CONFIG_BAUDRATE			115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}
-#define CONFIG_SYS_SERIAL0		0x808C0000
-#define CONFIG_SYS_SERIAL1		0x808D0000
-#define CONFIG_PL01x_PORTS	{(void *)CONFIG_SYS_SERIAL0, \
-			(void *)CONFIG_SYS_SERIAL1}
-
-/* Status LED */
-#define CONFIG_STATUS_LED		1 /* Status LED enabled	*/
-#define CONFIG_BOARD_SPECIFIC_LED	1
-#define STATUS_LED_GREEN		0
-#define STATUS_LED_RED			1
-/* Green */
-#define STATUS_LED_BIT			STATUS_LED_GREEN
-#define STATUS_LED_STATE		STATUS_LED_ON
-#define STATUS_LED_PERIOD		(CONFIG_SYS_HZ / 2)
-/* Red */
-#define STATUS_LED_BIT1			STATUS_LED_RED
-#define STATUS_LED_STATE1		STATUS_LED_OFF
-#define STATUS_LED_PERIOD1		(CONFIG_SYS_HZ / 2)
-/* Optional value */
-#define STATUS_LED_BOOT			STATUS_LED_BIT
-
-/* Network hardware configuration */
-#define CONFIG_DRIVER_EP93XX_MAC
-#define CONFIG_MII_SUPPRESS_PREAMBLE
-#define CONFIG_MII
-#define CONFIG_PHY_ADDR		1
-#define CONFIG_NET_MULTI
-#undef  CONFIG_NETCONSOLE
-
-/* SDRAM configuration */
-#if defined(CONFIG_EDB9301) || defined(CONFIG_EDB9302)
-/*
- * EDB9301/2 has 4 banks of SDRAM consisting of 1x Samsung K4S561632E-TC75
- * 256 Mbit SDRAM on a 16-bit data bus, for a total of 32MB of SDRAM. We set
- * the SROMLL bit on the processor, resulting in this non-contiguous memory map.
- */
-#define CONFIG_NR_DRAM_BANKS		4
-#define PHYS_SDRAM_1			0x00000000
-#define PHYS_SDRAM_SIZE_1		0x00800000
-#define PHYS_SDRAM_2			0x01000000
-#define PHYS_SDRAM_SIZE_2		0x00800000
-#define PHYS_SDRAM_3			0x04000000
-#define PHYS_SDRAM_SIZE_3		0x00800000
-#define PHYS_SDRAM_4			0x05000000
-#define PHYS_SDRAM_SIZE_4		0x00800000
-#define CONFIG_EDB93XX_SDCS3
-#define CONFIG_SYS_MEMTEST_START	0x00100000
-#define CONFIG_SYS_MEMTEST_END		0x007fffff
-
-#elif defined(CONFIG_EDB9302A)
-/*
- * EDB9302a has 4 banks of SDRAM consisting of 1x Samsung K4S561632E-TC75
- * 256 Mbit SDRAM on a 16-bit data bus, for a total of 32MB of SDRAM. We set
- * the SROMLL bit on the processor, resulting in this non-contiguous memory map.
- */
-#define CONFIG_NR_DRAM_BANKS		4
-#define PHYS_SDRAM_1			0xc0000000
-#define PHYS_SDRAM_SIZE_1		0x00800000
-#define PHYS_SDRAM_2			0xc1000000
-#define PHYS_SDRAM_SIZE_2		0x00800000
-#define PHYS_SDRAM_3			0xc4000000
-#define PHYS_SDRAM_SIZE_3		0x00800000
-#define PHYS_SDRAM_4			0xc5000000
-#define PHYS_SDRAM_SIZE_4		0x00800000
-#define CONFIG_EDB93XX_SDCS0
-#define CONFIG_SYS_MEMTEST_START	0xc0100000
-#define CONFIG_SYS_MEMTEST_END		0xc07fffff
-
-#elif defined(CONFIG_EDB9307) || defined CONFIG_EDB9312 || \
-	defined(CONFIG_EDB9315)
-/*
- * The EDB9307, EDB9312, and EDB9315 have 2 banks of SDRAM consisting of
- * 2x Samsung K4S561632E-TC75 256 Mbit on a 32-bit data bus, for a total of
- * 64 MB of SDRAM.
- */
-#define CONFIG_NR_DRAM_BANKS		2
-#define PHYS_SDRAM_1			0x00000000
-#define PHYS_SDRAM_SIZE_1		0x02000000
-#define PHYS_SDRAM_2			0x04000000
-#define PHYS_SDRAM_SIZE_2		0x02000000
-#define CONFIG_EDB93XX_SDCS3
-#define CONFIG_SYS_MEMTEST_START	0x00100000
-#define CONFIG_SYS_MEMTEST_END		0x01e00000
-
-#elif defined(CONFIG_EDB9307A) || defined(CONFIG_EDB9315A)
-/*
- * The EDB9307A and EDB9315A have 2 banks of SDRAM consisting of 2x Samsung
- * K4S561632E-TC75 256 Mbit on a 32-bit data bus, for a total of 64 MB of SDRAM.
- */
-#define CONFIG_NR_DRAM_BANKS		2
-#define PHYS_SDRAM_1			0xc0000000
-#define PHYS_SDRAM_SIZE_1		0x02000000
-#define PHYS_SDRAM_2			0xc4000000
-#define PHYS_SDRAM_SIZE_2		0x02000000
-#define CONFIG_EDB93XX_SDCS0
-#define CONFIG_SYS_MEMTEST_START	0xc0100000
-#define CONFIG_SYS_MEMTEST_END		0xc1e00000
-#endif
-
-/* Default load address */
-#define CONFIG_SYS_LOAD_ADDR   (PHYS_SDRAM_1 + 0x01000000)
-
-/* Must match kernel config */
-#define LINUX_BOOT_PARAM_ADDR	(PHYS_SDRAM_1 + 0x100)
-
-/* Run-time memory allocatons */
-#define CONFIG_STACKSIZE		(128 * 1024)
-
-#if defined(CONFIG_USE_IRQ)
-#define CONFIG_STACKSIZE_IRQ	(4 * 1024)
-#define CONFIG_STACKSIZE_FIQ	(4 * 1024)
-#endif
-
-#define CONFIG_SYS_MALLOC_LEN		(512 * 1024)
-
-/* -----------------------------------------------------------------------------
- * FLASH and environment organization
- *
- * The EDB9301 and EDB9302(a) have 1 bank of flash memory at 0x60000000
- * consisting of 1x Intel TE28F128J3C-150 128 Mbit flash on a 16-bit data bus,
- * for a total of 16 MB of CFI-compatible flash.
- *
- * The EDB9307(a), EDB9312, and EDB9315(a) have 1 bank of flash memory at
- * 0x60000000 consisting of 2x Micron MT28F128J3-12 128 Mbit flash on a 32-bit
- * data bus, for a total of 32 MB of CFI-compatible flash.
- *
- *                            EDB9301/02(a)          EDB9307(a)/12/15(a)
- * 0x60000000 - 0x0003FFFF    u-boot                 u-boot
- * 0x60040000 - 0x0005FFFF    environment #1         environment #1
- * 0x60060000 - 0x0007FFFF    environment #2         environment #1 (continued)
- * 0x60080000 - 0x0009FFFF    unused                 environment #2
- * 0x600A0000 - 0x000BFFFF    unused                 environment #2 (continued)
- * 0x600C0000 - 0x00FFFFFF    unused                 unused
- * 0x61000000 - 0x01FFFFFF    not present            unused
- */
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_MAX_FLASH_BANKS	1
-#define CONFIG_SYS_MAX_FLASH_SECT	128
-
-#define PHYS_FLASH_1			0x60000000
-#define CONFIG_SYS_FLASH_BASE		(PHYS_FLASH_1)
-#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)
-
-#define CONFIG_ENV_OVERWRITE		/* Vendor params unprotected */
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_ADDR			0x60040000
-
-#define CONFIG_ENV_ADDR_REDUND		(CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
-
-#define CONFIG_ENV_SIZE			CONFIG_ENV_SECT_SIZE
-#define CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE
-
-#endif /* !defined (__CONFIG_H) */