diff options
| author | Kazuaki Ichinohe <kazuichi@fsi.co.jp> | 2009-06-12 18:10:12 +0900 |
|---|---|---|
| committer | Wolfgang Denk <wd@denx.de> | 2009-07-19 11:24:09 +0200 |
| commit | e405afab1dda66c9df3733f6b779d72fc36a0162 (patch) | |
| tree | cb565370e86895df6440455215030f68d5f8e66b /include/configs/canyonlands.h | |
| parent | 52a0e2dee90c17e39634de814b16b96061cfb472 (diff) | |
| download | talos-obmc-uboot-e405afab1dda66c9df3733f6b779d72fc36a0162.tar.gz talos-obmc-uboot-e405afab1dda66c9df3733f6b779d72fc36a0162.zip | |
Canyonlands SATA harddisk driver
This patch adds a SATA harddisk driver for the canyonlands.
This patch is kernel driver's porting.
This patch corresponded to not cmd_scsi but cmd_sata.
This patch divided an unused member with ifndef __U_BOOT__ in the structure.
[environment variable, boot script]
setenv bootargs root=/dev/sda7 rw
setenv bootargs ${bootargs} console=ttyS0,115200
ext2load sata 0:2 0x400000 /canyonlands/uImage
ext2load sata 0:2 0x800000 /canyonlands/canyonlands.dtb
fdt addr 0x800000 0x4000
bootm 0x400000 - 0x800000
If you drive SATA-2 disk on Canyonlands, you must change parts from
PI2PCIE212 to PI2PCIE2212 on U25. We confirmed to boot by using
following disks:
1.Vendor: Fujitsu Type: MHW2040BS
2.Vendor: Fujitsu Type: MHW2060BK
3.Vendor: HAGIWARA SYS-COM:HFD25S-032GT
4.Vendor: WesternDigital Type: WD3200BJKT (CONFIG_LBA48 required)
5.Vendor: WesternDigital Type: WD3200BEVT (CONFIG_LBA48 required)
6.Vendor: Hitachi Type: HTS543232L9A300 (CONFIG_LBA48 required)
7.Vendor: Seagate Type: ST31000333AS (CONFIG_LBA48 required)
8.Vendor: Transcend Type: TS32GSSD25S-M
9.Vendor: MTRON Type: MSD-SATA1525-016
Signed-off-by: Kazuaki Ichinohe <kazuichi at fsi.co.jp>
Diffstat (limited to 'include/configs/canyonlands.h')
| -rw-r--r-- | include/configs/canyonlands.h | 14 |
1 files changed, 14 insertions, 0 deletions
diff --git a/include/configs/canyonlands.h b/include/configs/canyonlands.h index 48c51988af..d22d4113de 100644 --- a/include/configs/canyonlands.h +++ b/include/configs/canyonlands.h @@ -453,6 +453,7 @@ #define CONFIG_CMD_FAT #define CONFIG_CMD_NAND #define CONFIG_CMD_PCI +#define CONFIG_CMD_SATA #define CONFIG_CMD_SDRAM #define CONFIG_CMD_SNTP #define CONFIG_CMD_USB @@ -518,6 +519,19 @@ #endif /* CONFIG_ARCHES */ #endif /* CONFIG_460GT */ +/* + * SATA driver setup + */ +#ifdef CONFIG_CMD_SATA +#define CONFIG_SATA_DWC +#define CONFIG_LIBATA +#define SATA_BASE_ADDR 0xe20d1000 /* PPC460EX SATA Base Address */ +#define SATA_DMA_REG_ADDR 0xe20d0800 /* PPC460EX SATA Base Address */ +#define CONFIG_SYS_SATA_MAX_DEVICE 1 /* SATA MAX DEVICE */ +/* Convert sectorsize to wordsize */ +#define ATA_SECTOR_WORDS (ATA_SECT_SIZE/2) +#endif + /*----------------------------------------------------------------------- * External Bus Controller (EBC) Setup *----------------------------------------------------------------------*/ |
