[ARM] TI DaVinci support, hopefully final

Add support for the following DaVinci boards:
- DV_EVM
- SCHMOOGIE
- SONATA

Changes:

- Split into separate board directories
- Removed changes to MTD_DEBUG (or whatever it's called)
- New CONFIG_CMD party line followed
- Some cosmetic fixes, cleanup etc.
- Patches against the latest U-Boot tree as of now.
- Fixed CONFIG_CMD_NET in net files.
- Fixed CONFIG_CMD_EEPROM for schmoogie.
- Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and
   DV_EVM. Can't check if it works on SONATA, don't have a board any more,
   but it at least compiles.

Here is an excerpt from session log on SCHMOOGIE...

U-Boot 1.2.0-g6c33c785-dirty (Aug  7 2007 - 13:07:17)

DRAM:  128 MB
NAND:  128 MiB
In:    serial
Out:   serial
Err:   serial
ARM Clock : 297MHz
DDR Clock : 162MHz
ETH PHY   : DP83848 @ 0x01
U-Boot > iprobe
Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F
U-Boot > ping 192.168.253.10
host 192.168.253.10 is alive
U-Boot >

Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
Acked-by: Dirk Behme <dirk.behme@gmail.com>
Acked-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
Acked-by: Stefan Roese <sr@denx.de>

1 files changed, 94 insertions, 0 deletions

diff --git a/include/asm-arm/arch-davinci/i2c_defs.h b/include/asm-arm/arch-davinci/i2c_defs.h
new file mode 100644
index 0000000000..2e902e17f8
--- /dev/null
+++ b/include/asm-arm/arch-davinci/i2c_defs.h
@@ -0,0 +1,94 @@
+/*
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ *
+ * Some changes copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _DAVINCI_I2C_H_
+#define _DAVINCI_I2C_H_
+
+#define I2C_WRITE		0
+#define I2C_READ		1
+
+#define I2C_BASE		0x01c21000
+
+#define	I2C_OA			(I2C_BASE + 0x00)
+#define I2C_IE			(I2C_BASE + 0x04)
+#define I2C_STAT		(I2C_BASE + 0x08)
+#define I2C_SCLL		(I2C_BASE + 0x0c)
+#define I2C_SCLH		(I2C_BASE + 0x10)
+#define I2C_CNT			(I2C_BASE + 0x14)
+#define I2C_DRR			(I2C_BASE + 0x18)
+#define I2C_SA			(I2C_BASE + 0x1c)
+#define I2C_DXR			(I2C_BASE + 0x20)
+#define I2C_CON			(I2C_BASE + 0x24)
+#define I2C_IV			(I2C_BASE + 0x28)
+#define I2C_PSC			(I2C_BASE + 0x30)
+
+/* I2C masks */
+
+/* I2C Interrupt Enable Register (I2C_IE): */
+#define I2C_IE_SCD_IE	(1 << 5)	/* Stop condition detect interrupt enable */
+#define I2C_IE_XRDY_IE	(1 << 4)	/* Transmit data ready interrupt enable */
+#define I2C_IE_RRDY_IE	(1 << 3)	/* Receive data ready interrupt enable */
+#define I2C_IE_ARDY_IE	(1 << 2)	/* Register access ready interrupt enable */
+#define I2C_IE_NACK_IE	(1 << 1)	/* No acknowledgment interrupt enable */
+#define I2C_IE_AL_IE	(1 << 0)	/* Arbitration lost interrupt enable */
+
+/* I2C Status Register (I2C_STAT): */
+
+#define I2C_STAT_BB	(1 << 12)	/* Bus busy */
+#define I2C_STAT_ROVR	(1 << 11)	/* Receive overrun */
+#define I2C_STAT_XUDF	(1 << 10)	/* Transmit underflow */
+#define I2C_STAT_AAS	(1 << 9)	/* Address as slave */
+#define I2C_STAT_SCD	(1 << 5)	/* Stop condition detect */
+#define I2C_STAT_XRDY	(1 << 4)	/* Transmit data ready */
+#define I2C_STAT_RRDY	(1 << 3)	/* Receive data ready */
+#define I2C_STAT_ARDY	(1 << 2)	/* Register access ready */
+#define I2C_STAT_NACK	(1 << 1)	/* No acknowledgment interrupt enable */
+#define I2C_STAT_AL	(1 << 0)	/* Arbitration lost interrupt enable */
+
+
+/* I2C Interrupt Code Register (I2C_INTCODE): */
+
+#define I2C_INTCODE_MASK	7
+#define I2C_INTCODE_NONE	0
+#define I2C_INTCODE_AL		1	/* Arbitration lost */
+#define I2C_INTCODE_NAK		2	/* No acknowledgement/general call */
+#define I2C_INTCODE_ARDY	3	/* Register access ready */
+#define I2C_INTCODE_RRDY	4	/* Rcv data ready */
+#define I2C_INTCODE_XRDY	5	/* Xmit data ready */
+#define I2C_INTCODE_SCD		6	/* Stop condition detect */
+
+
+/* I2C Configuration Register (I2C_CON): */
+
+#define I2C_CON_EN	(1 << 5)	/* I2C module enable */
+#define I2C_CON_STB	(1 << 4)	/* Start byte mode (master mode only) */
+#define I2C_CON_MST	(1 << 10)	/* Master/slave mode */
+#define I2C_CON_TRX	(1 << 9)	/* Transmitter/receiver mode (master mode only) */
+#define I2C_CON_XA	(1 << 8)	/* Expand address */
+#define I2C_CON_STP	(1 << 11)	/* Stop condition (master mode only) */
+#define I2C_CON_STT	(1 << 13)	/* Start condition (master mode only) */
+
+#define I2C_TIMEOUT	0xffff0000	/* Timeout mask for poll_i2c_irq() */
+
+#endif