fsl_sec_mon: Add driver for Security Monitor block of Freescale

The Security Monitor is the SOC’s central reporting point for
security-relevant events such as the success or failure of boot
software validation and the detection of potential security compromises.

The API's for transition of Security states have been added
which will be used in case of SECURE BOOT.

Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
Signed-off-by: Gaurav Rana <gaurav.rana@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>

3 files changed, 155 insertions, 0 deletions

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 0df25c331f..36a8f0d098 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -53,3 +53,11 @@ config DM_CROS_EC
 	  but otherwise makes few changes. Since cros_ec also supports
 	  LPC (which doesn't support driver model yet), a full
 	  conversion is not yet possible.
+
+config CONFIG_FSL_SEC_MON
+	bool "Enable FSL SEC_MON Driver"
+	help
+	  Freescale Security Monitor block is responsible for monitoring
+	  system states.
+	  Security Monitor can be transitioned on any security failures,
+	  like software violations or hardware security violations.
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index a34972df4e..6028cd43fb 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -28,3 +28,4 @@ obj-$(CONFIG_SMSC_LPC47M) += smsc_lpc47m.o
 obj-$(CONFIG_STATUS_LED) += status_led.o
 obj-$(CONFIG_TWL4030_LED) += twl4030_led.o
 obj-$(CONFIG_FSL_IFC) += fsl_ifc.o
+obj-$(CONFIG_FSL_SEC_MON) += fsl_sec_mon.o
diff --git a/drivers/misc/fsl_sec_mon.c b/drivers/misc/fsl_sec_mon.c
new file mode 100644
index 0000000000..d482a7db9c
--- /dev/null
+++ b/drivers/misc/fsl_sec_mon.c
@@ -0,0 +1,146 @@
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <fsl_sec_mon.h>
+
+int change_sec_mon_state(u32 initial_state, u32 final_state)
+{
+	struct ccsr_sec_mon_regs *sec_mon_regs = (void *)
+						(CONFIG_SYS_SEC_MON_ADDR);
+	u32 sts = sec_mon_in32(&sec_mon_regs->hp_stat);
+	int timeout = 10;
+
+	if ((sts & HPSR_SSM_ST_MASK) != initial_state)
+		return -1;
+
+	if (initial_state == HPSR_SSM_ST_TRUST) {
+		switch (final_state) {
+		case HPSR_SSM_ST_NON_SECURE:
+			printf("SEC_MON state transitioning to Soft Fail.\n");
+			sec_mon_setbits32(&sec_mon_regs->hp_com, HPCOMR_SW_SV);
+
+			/*
+			 * poll till SEC_MON is in
+			 * Soft Fail state
+			 */
+			while (((sts & HPSR_SSM_ST_MASK) !=
+				HPSR_SSM_ST_SOFT_FAIL)) {
+				while (timeout) {
+					sts = sec_mon_in32
+						(&sec_mon_regs->hp_stat);
+
+					if ((sts & HPSR_SSM_ST_MASK) ==
+						HPSR_SSM_ST_SOFT_FAIL)
+						break;
+
+					udelay(10);
+					timeout--;
+				}
+			}
+
+			if (timeout == 0) {
+				printf("SEC_MON state transition timeout.\n");
+				return -1;
+			}
+
+			timeout = 10;
+
+			printf("SEC_MON state transitioning to Non Secure.\n");
+			sec_mon_setbits32(&sec_mon_regs->hp_com, HPCOMR_SSM_ST);
+
+			/*
+			 * poll till SEC_MON is in
+			 * Non Secure state
+			 */
+			while (((sts & HPSR_SSM_ST_MASK) !=
+				HPSR_SSM_ST_NON_SECURE)) {
+				while (timeout) {
+					sts = sec_mon_in32
+						(&sec_mon_regs->hp_stat);
+
+					if ((sts & HPSR_SSM_ST_MASK) ==
+						HPSR_SSM_ST_NON_SECURE)
+						break;
+
+					udelay(10);
+					timeout--;
+				}
+			}
+
+			if (timeout == 0) {
+				printf("SEC_MON state transition timeout.\n");
+				return -1;
+			}
+			break;
+		case HPSR_SSM_ST_SOFT_FAIL:
+			printf("SEC_MON state transitioning to Soft Fail.\n");
+			sec_mon_setbits32(&sec_mon_regs->hp_com, HPCOMR_SW_FSV);
+
+			/*
+			 * polling loop till SEC_MON is in
+			 * Soft Fail state
+			 */
+			while (((sts & HPSR_SSM_ST_MASK) !=
+				HPSR_SSM_ST_SOFT_FAIL)) {
+				while (timeout) {
+					sts = sec_mon_in32
+						(&sec_mon_regs->hp_stat);
+
+					if ((sts & HPSR_SSM_ST_MASK) ==
+						HPSR_SSM_ST_SOFT_FAIL)
+						break;
+
+					udelay(10);
+					timeout--;
+				}
+			}
+
+			if (timeout == 0) {
+				printf("SEC_MON state transition timeout.\n");
+				return -1;
+			}
+			break;
+		default:
+			return -1;
+		}
+	} else if (initial_state == HPSR_SSM_ST_NON_SECURE) {
+		switch (final_state) {
+		case HPSR_SSM_ST_SOFT_FAIL:
+			printf("SEC_MON state transitioning to Soft Fail.\n");
+			sec_mon_setbits32(&sec_mon_regs->hp_com, HPCOMR_SW_FSV);
+
+			/*
+			 * polling loop till SEC_MON is in
+			 * Soft Fail state
+			 */
+			while (((sts & HPSR_SSM_ST_MASK) !=
+				HPSR_SSM_ST_SOFT_FAIL)) {
+				while (timeout) {
+					sts = sec_mon_in32
+						(&sec_mon_regs->hp_stat);
+
+					if ((sts & HPSR_SSM_ST_MASK) ==
+						HPSR_SSM_ST_SOFT_FAIL)
+						break;
+
+					udelay(10);
+					timeout--;
+				}
+			}
+
+			if (timeout == 0) {
+				printf("SEC_MON state transition timeout.\n");
+				return -1;
+			}
+			break;
+		default:
+			return -1;
+		}
+	}
+
+	return 0;
+}