Merge branch 'master' of git://git.denx.de/u-boot-i2c

The sandburst-specific i2c drivers have been deleted, conflict was just
over the SPDX conversion.

Conflicts:
	board/sandburst/common/ppc440gx_i2c.c
	board/sandburst/common/ppc440gx_i2c.h

Signed-off-by: Tom Rini <trini@ti.com>

9 files changed, 1236 insertions, 333 deletions

diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index 4ffbfdde3c..37ccbd1423 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -12,7 +12,6 @@ LIB	:= $(obj)libi2c.o
 COBJS-$(CONFIG_BFIN_TWI_I2C) += bfin-twi_i2c.o
 COBJS-$(CONFIG_DRIVER_DAVINCI_I2C) += davinci_i2c.o
 COBJS-$(CONFIG_DW_I2C) += designware_i2c.o
-COBJS-$(CONFIG_FSL_I2C) += fsl_i2c.o
 COBJS-$(CONFIG_I2C_MVTWSI) += mvtwsi.o
 COBJS-$(CONFIG_I2C_MV) += mv_i2c.o
 COBJS-$(CONFIG_I2C_MXC) += mxc_i2c.o
@@ -21,15 +20,18 @@ COBJS-$(CONFIG_DRIVER_OMAP1510_I2C) += omap1510_i2c.o
 COBJS-$(CONFIG_DRIVER_OMAP24XX_I2C) += omap24xx_i2c.o
 COBJS-$(CONFIG_DRIVER_OMAP34XX_I2C) += omap24xx_i2c.o
 COBJS-$(CONFIG_PCA9564_I2C) += pca9564_i2c.o
-COBJS-$(CONFIG_PPC4XX_I2C) += ppc4xx_i2c.o
 COBJS-$(CONFIG_DRIVER_S3C24X0_I2C) += s3c24x0_i2c.o
 COBJS-$(CONFIG_S3C44B0_I2C) += s3c44b0_i2c.o
-COBJS-$(CONFIG_SOFT_I2C) += soft_i2c.o
-COBJS-$(CONFIG_TEGRA_I2C) += tegra_i2c.o
 COBJS-$(CONFIG_TSI108_I2C) += tsi108_i2c.o
 COBJS-$(CONFIG_U8500_I2C) += u8500_i2c.o
 COBJS-$(CONFIG_SH_I2C) += sh_i2c.o
 COBJS-$(CONFIG_SH_SH7734_I2C) += sh_sh7734_i2c.o
+COBJS-$(CONFIG_SYS_I2C) += i2c_core.o
+COBJS-$(CONFIG_SYS_I2C_FSL) += fsl_i2c.o
+COBJS-$(CONFIG_SYS_I2C_FTI2C010) += fti2c010.o
+COBJS-$(CONFIG_SYS_I2C_PPC4XX) += ppc4xx_i2c.o
+COBJS-$(CONFIG_SYS_I2C_SOFT) += soft_i2c.o
+COBJS-$(CONFIG_SYS_I2C_TEGRA) += tegra_i2c.o
 COBJS-$(CONFIG_ZYNQ_I2C) += zynq_i2c.o
 
 COBJS	:= $(COBJS-y)
diff --git a/drivers/i2c/fsl_i2c.c b/drivers/i2c/fsl_i2c.c
index 5d7e010319..38455e1c66 100644
--- a/drivers/i2c/fsl_i2c.c
+++ b/drivers/i2c/fsl_i2c.c
@@ -1,6 +1,9 @@
 /*
  * Copyright 2006,2009 Freescale Semiconductor, Inc.
  *
+ * 2012, Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ * Changes for multibus/multiadapter I2C support.
+ *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * Version 2 as published by the Free Software Foundation.
@@ -17,12 +20,8 @@
  */
 
 #include <common.h>
-
-#ifdef CONFIG_HARD_I2C
-
 #include <command.h>
 #include <i2c.h>		/* Functional interface */
-
 #include <asm/io.h>
 #include <asm/fsl_i2c.h>	/* HW definitions */
 
@@ -47,25 +46,10 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-/* Initialize the bus pointer to whatever one the SPD EEPROM is on.
- * Default is bus 0.  This is necessary because the DDR initialization
- * runs from ROM, and we can't switch buses because we can't modify
- * the global variables.
- */
-#ifndef CONFIG_SYS_SPD_BUS_NUM
-#define CONFIG_SYS_SPD_BUS_NUM 0
-#endif
-static unsigned int i2c_bus_num __attribute__ ((section (".data"))) = CONFIG_SYS_SPD_BUS_NUM;
-#if defined(CONFIG_I2C_MUX)
-static unsigned int i2c_bus_num_mux __attribute__ ((section ("data"))) = 0;
-#endif
-
-static unsigned int i2c_bus_speed[2] = {CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SPEED};
-
 static const struct fsl_i2c *i2c_dev[2] = {
-	(struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C_OFFSET),
-#ifdef CONFIG_SYS_I2C2_OFFSET
-	(struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C2_OFFSET)
+	(struct fsl_i2c *)(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_I2C_OFFSET),
+#ifdef CONFIG_SYS_FSL_I2C2_OFFSET
+	(struct fsl_i2c *)(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_I2C2_OFFSET)
 #endif
 };
 
@@ -222,12 +206,9 @@ static unsigned int get_i2c_clock(int bus)
 		return gd->arch.i2c1_clk;	/* I2C1 clock */
 }
 
-void
-i2c_init(int speed, int slaveadd)
+static void fsl_i2c_init(struct i2c_adapter *adap, int speed, int slaveadd)
 {
 	const struct fsl_i2c *dev;
-	unsigned int temp;
-	int bus_num, i;
 
 #ifdef CONFIG_SYS_I2C_INIT_BOARD
 	/* Call board specific i2c bus reset routine before accessing the
@@ -236,23 +217,14 @@ i2c_init(int speed, int slaveadd)
 	*/
 	i2c_init_board();
 #endif
-#ifdef CONFIG_SYS_I2C2_OFFSET
-	bus_num = 2;
-#else
-	bus_num = 1;
-#endif
-	for (i = 0; i < bus_num; i++) {
-		dev = i2c_dev[i];
-
-		writeb(0, &dev->cr);		/* stop I2C controller */
-		udelay(5);			/* let it shutdown in peace */
-		temp = set_i2c_bus_speed(dev, get_i2c_clock(i), speed);
-		if (gd->flags & GD_FLG_RELOC)
-			i2c_bus_speed[i] = temp;
-		writeb(slaveadd << 1, &dev->adr);/* write slave address */
-		writeb(0x0, &dev->sr);		/* clear status register */
-		writeb(I2C_CR_MEN, &dev->cr);	/* start I2C controller */
-	}
+	dev = (struct fsl_i2c *)i2c_dev[adap->hwadapnr];
+
+	writeb(0, &dev->cr);		/* stop I2C controller */
+	udelay(5);			/* let it shutdown in peace */
+	set_i2c_bus_speed(dev, get_i2c_clock(adap->hwadapnr), speed);
+	writeb(slaveadd << 1, &dev->adr);/* write slave address */
+	writeb(0x0, &dev->sr);		/* clear status register */
+	writeb(I2C_CR_MEN, &dev->cr);	/* start I2C controller */
 
 #ifdef CONFIG_SYS_I2C_BOARD_LATE_INIT
 	/* Call board specific i2c bus reset routine AFTER the bus has been
@@ -265,12 +237,13 @@ i2c_init(int speed, int slaveadd)
 }
 
 static int
-i2c_wait4bus(void)
+i2c_wait4bus(struct i2c_adapter *adap)
 {
+	struct fsl_i2c *dev = (struct fsl_i2c *)i2c_dev[adap->hwadapnr];
 	unsigned long long timeval = get_ticks();
 	const unsigned long long timeout = usec2ticks(CONFIG_I2C_MBB_TIMEOUT);
 
-	while (readb(&i2c_dev[i2c_bus_num]->sr) & I2C_SR_MBB) {
+	while (readb(&dev->sr) & I2C_SR_MBB) {
 		if ((get_ticks() - timeval) > timeout)
 			return -1;
 	}
@@ -279,20 +252,21 @@ i2c_wait4bus(void)
 }
 
 static __inline__ int
-i2c_wait(int write)
+i2c_wait(struct i2c_adapter *adap, int write)
 {
 	u32 csr;
 	unsigned long long timeval = get_ticks();
 	const unsigned long long timeout = usec2ticks(CONFIG_I2C_TIMEOUT);
+	struct fsl_i2c *dev = (struct fsl_i2c *)i2c_dev[adap->hwadapnr];
 
 	do {
-		csr = readb(&i2c_dev[i2c_bus_num]->sr);
+		csr = readb(&dev->sr);
 		if (!(csr & I2C_SR_MIF))
 			continue;
 		/* Read again to allow register to stabilise */
-		csr = readb(&i2c_dev[i2c_bus_num]->sr);
+		csr = readb(&dev->sr);
 
-		writeb(0x0, &i2c_dev[i2c_bus_num]->sr);
+		writeb(0x0, &dev->sr);
 
 		if (csr & I2C_SR_MAL) {
 			debug("i2c_wait: MAL\n");
@@ -317,29 +291,32 @@ i2c_wait(int write)
 }
 
 static __inline__ int
-i2c_write_addr (u8 dev, u8 dir, int rsta)
+i2c_write_addr(struct i2c_adapter *adap, u8 dev, u8 dir, int rsta)
 {
+	struct fsl_i2c *device = (struct fsl_i2c *)i2c_dev[adap->hwadapnr];
+
 	writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX
 	       | (rsta ? I2C_CR_RSTA : 0),
-	       &i2c_dev[i2c_bus_num]->cr);
+	       &device->cr);
 
-	writeb((dev << 1) | dir, &i2c_dev[i2c_bus_num]->dr);
+	writeb((dev << 1) | dir, &device->dr);
 
-	if (i2c_wait(I2C_WRITE_BIT) < 0)
+	if (i2c_wait(adap, I2C_WRITE_BIT) < 0)
 		return 0;
 
 	return 1;
 }
 
 static __inline__ int
-__i2c_write(u8 *data, int length)
+__i2c_write(struct i2c_adapter *adap, u8 *data, int length)
 {
+	struct fsl_i2c *dev = (struct fsl_i2c *)i2c_dev[adap->hwadapnr];
 	int i;
 
 	for (i = 0; i < length; i++) {
-		writeb(data[i], &i2c_dev[i2c_bus_num]->dr);
+		writeb(data[i], &dev->dr);
 
-		if (i2c_wait(I2C_WRITE_BIT) < 0)
+		if (i2c_wait(adap, I2C_WRITE_BIT) < 0)
 			break;
 	}
 
@@ -347,57 +324,60 @@ __i2c_write(u8 *data, int length)
 }
 
 static __inline__ int
-__i2c_read(u8 *data, int length)
+__i2c_read(struct i2c_adapter *adap, u8 *data, int length)
 {
+	struct fsl_i2c *dev = (struct fsl_i2c *)i2c_dev[adap->hwadapnr];
 	int i;
 
 	writeb(I2C_CR_MEN | I2C_CR_MSTA | ((length == 1) ? I2C_CR_TXAK : 0),
-	       &i2c_dev[i2c_bus_num]->cr);
+	       &dev->cr);
 
 	/* dummy read */
-	readb(&i2c_dev[i2c_bus_num]->dr);
+	readb(&dev->dr);
 
 	for (i = 0; i < length; i++) {
-		if (i2c_wait(I2C_READ_BIT) < 0)
+		if (i2c_wait(adap, I2C_READ_BIT) < 0)
 			break;
 
 		/* Generate ack on last next to last byte */
 		if (i == length - 2)
 			writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_TXAK,
-			       &i2c_dev[i2c_bus_num]->cr);
+			       &dev->cr);
 
 		/* Do not generate stop on last byte */
 		if (i == length - 1)
 			writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX,
-			       &i2c_dev[i2c_bus_num]->cr);
+			       &dev->cr);
 
-		data[i] = readb(&i2c_dev[i2c_bus_num]->dr);
+		data[i] = readb(&dev->dr);
 	}
 
 	return i;
 }
 
-int
-i2c_read(u8 dev, uint addr, int alen, u8 *data, int length)
+static int
+fsl_i2c_read(struct i2c_adapter *adap, u8 dev, uint addr, int alen, u8 *data,
+	     int length)
 {
+	struct fsl_i2c *device = (struct fsl_i2c *)i2c_dev[adap->hwadapnr];
 	int i = -1; /* signal error */
 	u8 *a = (u8*)&addr;
 
-	if (i2c_wait4bus() < 0)
+	if (i2c_wait4bus(adap) < 0)
 		return -1;
 
 	if ((!length || alen > 0)
-	    && i2c_write_addr(dev, I2C_WRITE_BIT, 0) != 0
-	    && __i2c_write(&a[4 - alen], alen) == alen)
+	    && i2c_write_addr(adap, dev, I2C_WRITE_BIT, 0) != 0
+	    && __i2c_write(adap, &a[4 - alen], alen) == alen)
 		i = 0; /* No error so far */
 
 	if (length &&
-	    i2c_write_addr(dev, I2C_READ_BIT, alen ? 1 : 0) != 0)
-		i = __i2c_read(data, length);
+	    i2c_write_addr(adap, dev, I2C_READ_BIT, alen ? 1 : 0) != 0)
+		i = __i2c_read(adap, data, length);
 
-	writeb(I2C_CR_MEN, &i2c_dev[i2c_bus_num]->cr);
+	writeb(I2C_CR_MEN, &device->cr);
 
-	if (i2c_wait4bus()) /* Wait until STOP */
+	if (i2c_wait4bus(adap)) /* Wait until STOP */
 		debug("i2c_read: wait4bus timed out\n");
 
 	if (i == length)
@@ -406,20 +386,22 @@ i2c_read(u8 dev, uint addr, int alen, u8 *data, int length)
 	return -1;
 }
 
-int
-i2c_write(u8 dev, uint addr, int alen, u8 *data, int length)
+static int
+fsl_i2c_write(struct i2c_adapter *adap, u8 dev, uint addr, int alen,
+	      u8 *data, int length)
 {
+	struct fsl_i2c *device = (struct fsl_i2c *)i2c_dev[adap->hwadapnr];
 	int i = -1; /* signal error */
 	u8 *a = (u8*)&addr;
 
-	if (i2c_wait4bus() >= 0
-	    && i2c_write_addr(dev, I2C_WRITE_BIT, 0) != 0
-	    && __i2c_write(&a[4 - alen], alen) == alen) {
-		i = __i2c_write(data, length);
+	if (i2c_wait4bus(adap) >= 0 &&
+	    i2c_write_addr(adap, dev, I2C_WRITE_BIT, 0) != 0 &&
+	    __i2c_write(adap, &a[4 - alen], alen) == alen) {
+		i = __i2c_write(adap, data, length);
 	}
 
-	writeb(I2C_CR_MEN, &i2c_dev[i2c_bus_num]->cr);
-	if (i2c_wait4bus()) /* Wait until STOP */
+	writeb(I2C_CR_MEN, &device->cr);
+	if (i2c_wait4bus(adap)) /* Wait until STOP */
 		debug("i2c_write: wait4bus timed out\n");
 
 	if (i == length)
@@ -428,72 +410,42 @@ i2c_write(u8 dev, uint addr, int alen, u8 *data, int length)
 	return -1;
 }
 
-int
-i2c_probe(uchar chip)
+static int
+fsl_i2c_probe(struct i2c_adapter *adap, uchar chip)
 {
+	struct fsl_i2c *dev = (struct fsl_i2c *)i2c_dev[adap->hwadapnr];
 	/* For unknow reason the controller will ACK when
 	 * probing for a slave with the same address, so skip
 	 * it.
 	 */
-	if (chip == (readb(&i2c_dev[i2c_bus_num]->adr) >> 1))
-		return -1;
-
-	return i2c_read(chip, 0, 0, NULL, 0);
-}
-
-int i2c_set_bus_num(unsigned int bus)
-{
-#if defined(CONFIG_I2C_MUX)
-	if (bus < CONFIG_SYS_MAX_I2C_BUS) {
-		i2c_bus_num = bus;
-	} else {
-		int	ret;
-
-		ret = i2x_mux_select_mux(bus);
-		if (ret)
-			return ret;
-		i2c_bus_num = 0;
-	}
-	i2c_bus_num_mux = bus;
-#else
-#ifdef CONFIG_SYS_I2C2_OFFSET
-	if (bus > 1) {
-#else
-	if (bus > 0) {
-#endif
+	if (chip == (readb(&dev->adr) >> 1))
 		return -1;
-	}
 
-	i2c_bus_num = bus;
-#endif
-	return 0;
+	return fsl_i2c_read(adap, chip, 0, 0, NULL, 0);
 }
 
-int i2c_set_bus_speed(unsigned int speed)
+static unsigned int fsl_i2c_set_bus_speed(struct i2c_adapter *adap,
+			unsigned int speed)
 {
-	unsigned int i2c_clk = (i2c_bus_num == 1)
-			? gd->arch.i2c2_clk : gd->arch.i2c1_clk;
+	struct fsl_i2c *dev = (struct fsl_i2c *)i2c_dev[adap->hwadapnr];
 
-	writeb(0, &i2c_dev[i2c_bus_num]->cr);		/* stop controller */
-	i2c_bus_speed[i2c_bus_num] =
-		set_i2c_bus_speed(i2c_dev[i2c_bus_num], i2c_clk, speed);
-	writeb(I2C_CR_MEN, &i2c_dev[i2c_bus_num]->cr);	/* start controller */
+	writeb(0, &dev->cr);		/* stop controller */
+	set_i2c_bus_speed(dev, get_i2c_clock(adap->hwadapnr), speed);
+	writeb(I2C_CR_MEN, &dev->cr);	/* start controller */
 
 	return 0;
 }
 
-unsigned int i2c_get_bus_num(void)
-{
-#if defined(CONFIG_I2C_MUX)
-	return i2c_bus_num_mux;
-#else
-	return i2c_bus_num;
+/*
+ * Register fsl i2c adapters
+ */
+U_BOOT_I2C_ADAP_COMPLETE(fsl_0, fsl_i2c_init, fsl_i2c_probe, fsl_i2c_read,
+			 fsl_i2c_write, fsl_i2c_set_bus_speed,
+			 CONFIG_SYS_FSL_I2C_SPEED, CONFIG_SYS_FSL_I2C_SLAVE,
+			 0)
+#ifdef CONFIG_SYS_FSL_I2C2_OFFSET
+U_BOOT_I2C_ADAP_COMPLETE(fsl_1, fsl_i2c_init, fsl_i2c_probe, fsl_i2c_read,
+			 fsl_i2c_write, fsl_i2c_set_bus_speed,
+			 CONFIG_SYS_FSL_I2C2_SPEED, CONFIG_SYS_FSL_I2C2_SLAVE,
+			 1)
 #endif
-}
-
-unsigned int i2c_get_bus_speed(void)
-{
-	return i2c_bus_speed[i2c_bus_num];
-}
-
-#endif /* CONFIG_HARD_I2C */
diff --git a/drivers/i2c/fti2c010.c b/drivers/i2c/fti2c010.c
new file mode 100644
index 0000000000..24c4bb53fa
--- /dev/null
+++ b/drivers/i2c/fti2c010.c
@@ -0,0 +1,369 @@
+/*
+ * Faraday I2C Controller
+ *
+ * (C) Copyright 2010 Faraday Technology
+ * Dante Su <dantesu@faraday-tech.com>
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <i2c.h>
+
+#include "fti2c010.h"
+
+#ifndef CONFIG_HARD_I2C
+#error "fti2c010: CONFIG_HARD_I2C is not defined"
+#endif
+
+#ifndef CONFIG_SYS_I2C_SPEED
+#define CONFIG_SYS_I2C_SPEED    50000
+#endif
+
+#ifndef CONFIG_FTI2C010_FREQ
+#define CONFIG_FTI2C010_FREQ    clk_get_rate("I2C")
+#endif
+
+/* command timeout */
+#define CFG_CMD_TIMEOUT         10 /* ms */
+
+/* 7-bit chip address + 1-bit read/write */
+#define I2C_RD(chip)            ((((chip) << 1) & 0xff) | 1)
+#define I2C_WR(chip)            (((chip) << 1) & 0xff)
+
+struct fti2c010_chip {
+	void __iomem *regs;
+	uint bus;
+	uint speed;
+};
+
+static struct fti2c010_chip chip_list[] = {
+	{
+		.bus  = 0,
+		.regs = (void __iomem *)CONFIG_FTI2C010_BASE,
+	},
+#ifdef CONFIG_I2C_MULTI_BUS
+# ifdef CONFIG_FTI2C010_BASE1
+	{
+		.bus  = 1,
+		.regs = (void __iomem *)CONFIG_FTI2C010_BASE1,
+	},
+# endif
+# ifdef CONFIG_FTI2C010_BASE2
+	{
+		.bus  = 2,
+		.regs = (void __iomem *)CONFIG_FTI2C010_BASE2,
+	},
+# endif
+# ifdef CONFIG_FTI2C010_BASE3
+	{
+		.bus  = 3,
+		.regs = (void __iomem *)CONFIG_FTI2C010_BASE3,
+	},
+# endif
+#endif  /* #ifdef CONFIG_I2C_MULTI_BUS */
+};
+
+static struct fti2c010_chip *curr = chip_list;
+
+static int fti2c010_wait(uint32_t mask)
+{
+	int ret = -1;
+	uint32_t stat, ts;
+	struct fti2c010_regs *regs = curr->regs;
+
+	for (ts = get_timer(0); get_timer(ts) < CFG_CMD_TIMEOUT; ) {
+		stat = readl(&regs->sr);
+		if ((stat & mask) == mask) {
+			ret = 0;
+			break;
+		}
+	}
+
+	return ret;
+}
+
+/*
+ * u-boot I2C API
+ */
+
+/*
+ * Initialization, must be called once on start up, may be called
+ * repeatedly to change the speed and slave addresses.
+ */
+void i2c_init(int speed, int slaveaddr)
+{
+	if (speed || !curr->speed)
+		i2c_set_bus_speed(speed);
+
+	/* if slave mode disabled */
+	if (!slaveaddr)
+		return;
+
+	/*
+	 * TODO:
+	 * Implement slave mode, but is it really necessary?
+	 */
+}
+
+/*
+ * Probe the given I2C chip address.  Returns 0 if a chip responded,
+ * not 0 on failure.
+ */
+int i2c_probe(uchar chip)
+{
+	int ret;
+	struct fti2c010_regs *regs = curr->regs;
+
+	i2c_init(0, 0);
+
+	/* 1. Select slave device (7bits Address + 1bit R/W) */
+	writel(I2C_WR(chip), &regs->dr);
+	writel(CR_ENABLE | CR_TBEN | CR_START, &regs->cr);
+	ret = fti2c010_wait(SR_DT);
+	if (ret)
+		return ret;
+
+	/* 2. Select device register */
+	writel(0, &regs->dr);
+	writel(CR_ENABLE | CR_TBEN, &regs->cr);
+	ret = fti2c010_wait(SR_DT);
+
+	return ret;
+}
+
+/*
+ * Read/Write interface:
+ *   chip:    I2C chip address, range 0..127
+ *   addr:    Memory (register) address within the chip
+ *   alen:    Number of bytes to use for addr (typically 1, 2 for larger
+ *              memories, 0 for register type devices with only one
+ *              register)
+ *   buffer:  Where to read/write the data
+ *   len:     How many bytes to read/write
+ *
+ *   Returns: 0 on success, not 0 on failure
+ */
+int i2c_read(uchar chip, uint addr, int alen, uchar *buf, int len)
+{
+	int ret, pos;
+	uchar paddr[4];
+	struct fti2c010_regs *regs = curr->regs;
+
+	i2c_init(0, 0);
+
+	paddr[0] = (addr >> 0)  & 0xFF;
+	paddr[1] = (addr >> 8)  & 0xFF;
+	paddr[2] = (addr >> 16) & 0xFF;
+	paddr[3] = (addr >> 24) & 0xFF;
+
+	/*
+	 * Phase A. Set register address
+	 */
+
+	/* A.1 Select slave device (7bits Address + 1bit R/W) */
+	writel(I2C_WR(chip), &regs->dr);
+	writel(CR_ENABLE | CR_TBEN | CR_START, &regs->cr);
+	ret = fti2c010_wait(SR_DT);
+	if (ret)
+		return ret;
+
+	/* A.2 Select device register */
+	for (pos = 0; pos < alen; ++pos) {
+		uint32_t ctrl = CR_ENABLE | CR_TBEN;
+
+		writel(paddr[pos], &regs->dr);
+		writel(ctrl, &regs->cr);
+		ret = fti2c010_wait(SR_DT);
+		if (ret)
+			return ret;
+	}
+
+	/*
+	 * Phase B. Get register data
+	 */
+
+	/* B.1 Select slave device (7bits Address + 1bit R/W) */
+	writel(I2C_RD(chip), &regs->dr);
+	writel(CR_ENABLE | CR_TBEN | CR_START, &regs->cr);
+	ret = fti2c010_wait(SR_DT);
+	if (ret)
+		return ret;
+
+	/* B.2 Get register data */
+	for (pos = 0; pos < len; ++pos) {
+		uint32_t ctrl = CR_ENABLE | CR_TBEN;
+		uint32_t stat = SR_DR;
+
+		if (pos == len - 1) {
+			ctrl |= CR_NAK | CR_STOP;
+			stat |= SR_ACK;
+		}
+		writel(ctrl, &regs->cr);
+		ret = fti2c010_wait(stat);
+		if (ret)
+			break;
+		buf[pos] = (uchar)(readl(&regs->dr) & 0xFF);
+	}
+
+	return ret;
+}
+
+/*
+ * Read/Write interface:
+ *   chip:    I2C chip address, range 0..127
+ *   addr:    Memory (register) address within the chip
+ *   alen:    Number of bytes to use for addr (typically 1, 2 for larger
+ *              memories, 0 for register type devices with only one
+ *              register)
+ *   buffer:  Where to read/write the data
+ *   len:     How many bytes to read/write
+ *
+ *   Returns: 0 on success, not 0 on failure
+ */
+int i2c_write(uchar chip, uint addr, int alen, uchar *buf, int len)
+{
+	int ret, pos;
+	uchar paddr[4];
+	struct fti2c010_regs *regs = curr->regs;
+
+	i2c_init(0, 0);
+
+	paddr[0] = (addr >> 0)  & 0xFF;
+	paddr[1] = (addr >> 8)  & 0xFF;
+	paddr[2] = (addr >> 16) & 0xFF;
+	paddr[3] = (addr >> 24) & 0xFF;
+
+	/*
+	 * Phase A. Set register address
+	 *
+	 * A.1 Select slave device (7bits Address + 1bit R/W)
+	 */
+	writel(I2C_WR(chip), &regs->dr);
+	writel(CR_ENABLE | CR_TBEN | CR_START, &regs->cr);
+	ret = fti2c010_wait(SR_DT);
+	if (ret)
+		return ret;
+
+	/* A.2 Select device register */
+	for (pos = 0; pos < alen; ++pos) {
+		uint32_t ctrl = CR_ENABLE | CR_TBEN;
+
+		writel(paddr[pos], &regs->dr);
+		writel(ctrl, &regs->cr);
+		ret = fti2c010_wait(SR_DT);
+		if (ret)
+			return ret;
+	}
+
+	/*
+	 * Phase B. Set register data
+	 */
+	for (pos = 0; pos < len; ++pos) {
+		uint32_t ctrl = CR_ENABLE | CR_TBEN;
+
+		if (pos == len - 1)
+			ctrl |= CR_STOP;
+		writel(buf[pos], &regs->dr);
+		writel(ctrl, &regs->cr);
+		ret = fti2c010_wait(SR_DT);
+		if (ret)
+			break;
+	}
+
+	return ret;
+}
+
+/*
+ * Functions for setting the current I2C bus and its speed
+ */
+#ifdef CONFIG_I2C_MULTI_BUS
+
+/*
+ * i2c_set_bus_num:
+ *
+ *  Change the active I2C bus.  Subsequent read/write calls will
+ *  go to this one.
+ *
+ *    bus - bus index, zero based
+ *
+ *    Returns: 0 on success, not 0 on failure
+ */
+int i2c_set_bus_num(uint bus)
+{
+	if (bus >= ARRAY_SIZE(chip_list))
+		return -1;
+	curr = chip_list + bus;
+	i2c_init(0, 0);
+	return 0;
+}
+
+/*
+ * i2c_get_bus_num:
+ *
+ *  Returns index of currently active I2C bus.  Zero-based.
+ */
+
+uint i2c_get_bus_num(void)
+{
+	return curr->bus;
+}
+
+#endif    /* #ifdef CONFIG_I2C_MULTI_BUS */
+
+/*
+ * i2c_set_bus_speed:
+ *
+ *  Change the speed of the active I2C bus
+ *
+ *    speed - bus speed in Hz
+ *
+ *    Returns: 0 on success, not 0 on failure
+ */
+int i2c_set_bus_speed(uint speed)
+{
+	struct fti2c010_regs *regs = curr->regs;
+	uint clk = CONFIG_FTI2C010_FREQ;
+	uint gsr = 0, tsr = 32;
+	uint spd, div;
+
+	if (!speed)
+		speed = CONFIG_SYS_I2C_SPEED;
+
+	for (div = 0; div < 0x3ffff; ++div) {
+		/* SCLout = PCLK/(2*(COUNT + 2) + GSR) */
+		spd = clk / (2 * (div + 2) + gsr);
+		if (spd <= speed)
+			break;
+	}
+
+	if (curr->speed == spd)
+		return 0;
+
+	writel(CR_I2CRST, &regs->cr);
+	mdelay(100);
+	if (readl(&regs->cr) & CR_I2CRST) {
+		printf("fti2c010: reset timeout\n");
+		return -1;
+	}
+
+	curr->speed = spd;
+
+	writel(TGSR_GSR(gsr) | TGSR_TSR(tsr), &regs->tgsr);
+	writel(CDR_DIV(div), &regs->cdr);
+
+	return 0;
+}
+
+/*
+ * i2c_get_bus_speed:
+ *
+ *  Returns speed of currently active I2C bus in Hz
+ */
+
+uint i2c_get_bus_speed(void)
+{
+	return curr->speed;
+}
diff --git a/drivers/i2c/fti2c010.h b/drivers/i2c/fti2c010.h
new file mode 100644
index 0000000000..18aec2c976
--- /dev/null
+++ b/drivers/i2c/fti2c010.h
@@ -0,0 +1,81 @@
+/*
+ * Faraday I2C Controller
+ *
+ * (C) Copyright 2010 Faraday Technology
+ * Dante Su <dantesu@faraday-tech.com>
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ */
+
+#ifndef __FTI2C010_H
+#define __FTI2C010_H
+
+/*
+ * FTI2C010 registers
+ */
+struct fti2c010_regs {
+	uint32_t cr;  /* 0x00: control register */
+	uint32_t sr;  /* 0x04: status register */
+	uint32_t cdr; /* 0x08: clock division register */
+	uint32_t dr;  /* 0x0c: data register */
+	uint32_t sar; /* 0x10: slave address register */
+	uint32_t tgsr;/* 0x14: time & glitch suppression register */
+	uint32_t bmr; /* 0x18: bus monitor register */
+	uint32_t rsvd[5];
+	uint32_t revr;/* 0x30: revision register */
+};
+
+/*
+ * control register
+ */
+#define CR_ALIRQ      0x2000  /* arbitration lost interrupt (master) */
+#define CR_SAMIRQ     0x1000  /* slave address match interrupt (slave) */
+#define CR_STOPIRQ    0x800   /* stop condition interrupt (slave) */
+#define CR_NAKRIRQ    0x400   /* NACK response interrupt (master) */
+#define CR_DRIRQ      0x200   /* rx interrupt (both) */
+#define CR_DTIRQ      0x100   /* tx interrupt (both) */
+#define CR_TBEN       0x80    /* tx enable (both) */
+#define CR_NAK        0x40    /* NACK (both) */
+#define CR_STOP       0x20    /* stop (master) */
+#define CR_START      0x10    /* start (master) */
+#define CR_GCEN       0x8     /* general call support (slave) */
+#define CR_SCLEN      0x4     /* enable clock out (master) */
+#define CR_I2CEN      0x2     /* enable I2C (both) */
+#define CR_I2CRST     0x1     /* reset I2C (both) */
+#define CR_ENABLE     \
+	(CR_ALIRQ | CR_NAKRIRQ | CR_DRIRQ | CR_DTIRQ | CR_SCLEN | CR_I2CEN)
+
+/*
+ * status register
+ */
+#define SR_CLRAL      0x400    /* clear arbitration lost */
+#define SR_CLRGC      0x200    /* clear general call */
+#define SR_CLRSAM     0x100    /* clear slave address match */
+#define SR_CLRSTOP    0x80     /* clear stop */
+#define SR_CLRNAKR    0x40     /* clear NACK respond */
+#define SR_DR         0x20     /* rx ready */
+#define SR_DT         0x10     /* tx done */
+#define SR_BB         0x8      /* bus busy */
+#define SR_BUSY       0x4      /* chip busy */
+#define SR_ACK        0x2      /* ACK/NACK received */
+#define SR_RW         0x1      /* set when master-rx or slave-tx mode */
+
+/*
+ * clock division register
+ */
+#define CDR_DIV(n)    ((n) & 0x3ffff)
+
+/*
+ * time & glitch suppression register
+ */
+#define TGSR_GSR(n)   (((n) & 0x7) << 10)
+#define TGSR_TSR(n)   ((n) & 0x3ff)
+
+/*
+ * bus monitor register
+ */
+#define BMR_SCL       0x2      /* SCL is pull-up */
+#define BMR_SDA       0x1      /* SDA is pull-up */
+
+#endif /* __FTI2C010_H */
diff --git a/drivers/i2c/i2c_core.c b/drivers/i2c/i2c_core.c
new file mode 100644
index 0000000000..3c01893c9c
--- /dev/null
+++ b/drivers/i2c/i2c_core.c
@@ -0,0 +1,414 @@
+/*
+ * Copyright (C) 2009 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * (C) Copyright 2012
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * Multibus/multiadapter I2C core functions (wrappers)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <common.h>
+#include <i2c.h>
+
+struct i2c_adapter *i2c_get_adapter(int index)
+{
+	struct i2c_adapter *i2c_adap_p = ll_entry_start(struct i2c_adapter,
+						i2c);
+	int max = ll_entry_count(struct i2c_adapter, i2c);
+	int i;
+
+	if (index >= max) {
+		printf("Error, wrong i2c adapter %d max %d possible\n",
+		       index, max);
+		return i2c_adap_p;
+	}
+	if (index == 0)
+		return i2c_adap_p;
+
+	for (i = 0; i < index; i++)
+		i2c_adap_p++;
+
+	return i2c_adap_p;
+}
+
+#if !defined(CONFIG_SYS_I2C_DIRECT_BUS)
+struct i2c_bus_hose i2c_bus[CONFIG_SYS_NUM_I2C_BUSES] =
+			CONFIG_SYS_I2C_BUSES;
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void i2c_reloc_fixup(void)
+{
+#if defined(CONFIG_NEEDS_MANUAL_RELOC)
+	struct i2c_adapter *i2c_adap_p = ll_entry_start(struct i2c_adapter,
+						i2c);
+	struct i2c_adapter *tmp = i2c_adap_p;
+	int max = ll_entry_count(struct i2c_adapter, i2c);
+	int		i;
+	unsigned long	addr;
+
+	if (gd->reloc_off == 0)
+		return;
+
+	for (i = 0; i < max; i++) {
+		/* adapter itself */
+		addr = (unsigned long)i2c_adap_p;
+		addr += gd->reloc_off;
+		i2c_adap_p = (struct i2c_adapter *)addr;
+		/* i2c_init() */
+		addr = (unsigned long)i2c_adap_p->init;
+		addr += gd->reloc_off;
+		i2c_adap_p->init = (void (*)(int, int))addr;
+		/* i2c_probe() */
+		addr = (unsigned long)i2c_adap_p->probe;
+		addr += gd->reloc_off;
+		i2c_adap_p->probe = (int (*)(uint8_t))addr;
+		/* i2c_read() */
+		addr = (unsigned long)i2c_adap_p->read;
+		addr += gd->reloc_off;
+		i2c_adap_p->read = (int (*)(uint8_t, uint, int, uint8_t *,
+					int))addr;
+		/* i2c_write() */
+		addr = (unsigned long)i2c_adap_p->write;
+		addr += gd->reloc_off;
+		i2c_adap_p->write = (int (*)(uint8_t, uint, int, uint8_t *,
+					int))addr;
+		/* i2c_set_bus_speed() */
+		addr = (unsigned long)i2c_adap_p->set_bus_speed;
+		addr += gd->reloc_off;
+		i2c_adap_p->set_bus_speed = (uint (*)(uint))addr;
+		/* name */
+		addr = (unsigned long)i2c_adap_p->name;
+		addr += gd->reloc_off;
+		i2c_adap_p->name = (char *)addr;
+		tmp++;
+		i2c_adap_p = tmp;
+	}
+#endif
+}
+
+#ifndef CONFIG_SYS_I2C_DIRECT_BUS
+/*
+ * i2c_mux_set()
+ * -------------
+ *
+ * This turns on the given channel on I2C multiplexer chip connected to
+ * a given I2C adapter directly or via other multiplexers. In the latter
+ * case the entire multiplexer chain must be initialized first starting
+ * with the one connected directly to the adapter. When disabling a chain
+ * muxes must be programmed in reverse order, starting with the one
+ * farthest from the adapter.
+ *
+ * mux_id is the multiplexer chip type from defined in i2c.h. So far only
+ * NXP (Philips) PCA954x multiplexers are supported. Switches are NOT
+ * supported (anybody uses them?)
+ */
+
+static int i2c_mux_set(struct i2c_adapter *adap, int mux_id, int chip,
+			int channel)
+{
+	uint8_t	buf;
+	int ret;
+
+	/* channel < 0 - turn off the mux */
+	if (channel < 0) {
+		buf = 0;
+		ret = adap->write(adap, chip, 0, 0, &buf, 1);
+		if (ret)
+			printf("%s: Could not turn off the mux.\n", __func__);
+		return ret;
+	}
+
+	switch (mux_id) {
+	case I2C_MUX_PCA9540_ID:
+	case I2C_MUX_PCA9542_ID:
+		if (channel > 1)
+			return -1;
+		buf = (uint8_t)((channel & 0x01) | (1 << 2));
+		break;
+	case I2C_MUX_PCA9544_ID:
+		if (channel > 3)
+			return -1;
+		buf = (uint8_t)((channel & 0x03) | (1 << 2));
+		break;
+	case I2C_MUX_PCA9547_ID:
+		if (channel > 7)
+			return -1;
+		buf = (uint8_t)((channel & 0x07) | (1 << 3));
+		break;
+	default:
+		printf("%s: wrong mux id: %d\n", __func__, mux_id);
+		return -1;
+	}
+
+	ret = adap->write(adap, chip, 0, 0, &buf, 1);
+	if (ret)
+		printf("%s: could not set mux: id: %d chip: %x channel: %d\n",
+		       __func__, mux_id, chip, channel);
+	return ret;
+}
+
+static int i2c_mux_set_all(void)
+{
+	struct i2c_bus_hose *i2c_bus_tmp = &i2c_bus[I2C_BUS];
+	int i;
+
+	/* Connect requested bus if behind muxes */
+	if (i2c_bus_tmp->next_hop[0].chip != 0) {
+		/* Set all muxes along the path to that bus */
+		for (i = 0; i < CONFIG_SYS_I2C_MAX_HOPS; i++) {
+			int	ret;
+
+			if (i2c_bus_tmp->next_hop[i].chip == 0)
+				break;
+
+			ret = i2c_mux_set(I2C_ADAP,
+					i2c_bus_tmp->next_hop[i].mux.id,
+					i2c_bus_tmp->next_hop[i].chip,
+					i2c_bus_tmp->next_hop[i].channel);
+			if (ret != 0)
+				return ret;
+		}
+	}
+	return 0;
+}
+
+static int i2c_mux_disconnet_all(void)
+{
+	struct	i2c_bus_hose *i2c_bus_tmp = &i2c_bus[I2C_BUS];
+	int	i;
+	uint8_t	buf;
+
+	if (I2C_ADAP->init_done == 0)
+		return 0;
+
+	/* Disconnect current bus (turn off muxes if any) */
+	if ((i2c_bus_tmp->next_hop[0].chip != 0) &&
+	    (I2C_ADAP->init_done != 0)) {
+		i = CONFIG_SYS_I2C_MAX_HOPS;
+		do {
+			uint8_t	chip;
+			int ret;
+
+			chip = i2c_bus_tmp->next_hop[--i].chip;
+			if (chip == 0)
+				continue;
+
+			ret = I2C_ADAP->write(I2C_ADAP, chip, 0, 0, &buf, 1);
+			if (ret != 0) {
+				printf("i2c: mux diconnect error\n");
+				return ret;
+			}
+		} while (i > 0);
+	}
+
+	return 0;
+}
+#endif
+
+/*
+ * i2c_init_bus():
+ * ---------------
+ *
+ * Initializes one bus. Will initialize the parent adapter. No current bus
+ * changes, no mux (if any) setup.
+ */
+static void i2c_init_bus(unsigned int bus_no, int speed, int slaveaddr)
+{
+	if (bus_no >= CONFIG_SYS_NUM_I2C_BUSES)
+		return;
+
+	I2C_ADAP->init(I2C_ADAP, speed, slaveaddr);
+
+	if (gd->flags & GD_FLG_RELOC) {
+		I2C_ADAP->init_done = 1;
+		I2C_ADAP->speed = speed;
+		I2C_ADAP->slaveaddr = slaveaddr;
+	}
+}
+
+/* implement possible board specific board init */
+static void __def_i2c_init_board(void)
+{
+}
+void i2c_init_board(void)
+	__attribute__((weak, alias("__def_i2c_init_board")));
+
+/*
+ * i2c_init_all():
+ *
+ * not longer needed, will deleted. Actual init the SPD_BUS
+ * for compatibility.
+ * i2c_adap[] must be initialized beforehead with function pointers and
+ * data, including speed and slaveaddr.
+ */
+void i2c_init_all(void)
+{
+	i2c_init_board();
+	i2c_set_bus_num(CONFIG_SYS_SPD_BUS_NUM);
+	return;
+}
+
+/*
+ * i2c_get_bus_num():
+ * ------------------
+ *
+ *  Returns index of currently active I2C bus.  Zero-based.
+ */
+unsigned int i2c_get_bus_num(void)
+{
+	return gd->cur_i2c_bus;
+}
+
+/*
+ * i2c_set_bus_num():
+ * ------------------
+ *
+ *  Change the active I2C bus. Subsequent read/write calls will
+ *  go to this one. Sets all of the muxes in a proper condition
+ *  if that bus is behind muxes.
+ *  If previously selected bus is behind the muxes turns off all the
+ *  muxes along the path to that bus.
+ *
+ *	bus - bus index, zero based
+ *
+ *	Returns: 0 on success, not 0 on failure
+ */
+int i2c_set_bus_num(unsigned int bus)
+{
+	int max = ll_entry_count(struct i2c_adapter, i2c);
+
+	if (I2C_ADAPTER(bus) >= max) {
+		printf("Error, wrong i2c adapter %d max %d possible\n",
+		       I2C_ADAPTER(bus), max);
+		return -2;
+	}
+#ifndef CONFIG_SYS_I2C_DIRECT_BUS
+	if (bus >= CONFIG_SYS_NUM_I2C_BUSES)
+		return -1;
+#endif
+
+	if ((bus == I2C_BUS) && (I2C_ADAP->init_done > 0))
+		return 0;
+
+#ifndef CONFIG_SYS_I2C_DIRECT_BUS
+	i2c_mux_disconnet_all();
+#endif
+
+	gd->cur_i2c_bus = bus;
+	if (I2C_ADAP->init_done == 0)
+		i2c_init_bus(bus, I2C_ADAP->speed, I2C_ADAP->slaveaddr);
+
+#ifndef CONFIG_SYS_I2C_DIRECT_BUS
+	i2c_mux_set_all();
+#endif
+	return 0;
+}
+
+/*
+ * Probe the given I2C chip address.  Returns 0 if a chip responded,
+ * not 0 on failure.
+ */
+int i2c_probe(uint8_t chip)
+{
+	return I2C_ADAP->probe(I2C_ADAP, chip);
+}
+
+/*
+ * Read/Write interface:
+ *   chip:    I2C chip address, range 0..127
+ *   addr:    Memory (register) address within the chip
+ *   alen:    Number of bytes to use for addr (typically 1, 2 for larger
+ *              memories, 0 for register type devices with only one
+ *              register)
+ *   buffer:  Where to read/write the data
+ *   len:     How many bytes to read/write
+ *
+ *   Returns: 0 on success, not 0 on failure
+ */
+int i2c_read(uint8_t chip, unsigned int addr, int alen,
+				uint8_t *buffer, int len)
+{
+	return I2C_ADAP->read(I2C_ADAP, chip, addr, alen, buffer, len);
+}
+
+int i2c_write(uint8_t chip, unsigned int addr, int alen,
+				uint8_t *buffer, int len)
+{
+	return I2C_ADAP->write(I2C_ADAP, chip, addr, alen, buffer, len);
+}
+
+unsigned int i2c_set_bus_speed(unsigned int speed)
+{
+	unsigned int ret;
+
+	if (I2C_ADAP->set_bus_speed == NULL)
+		return 0;
+	ret = I2C_ADAP->set_bus_speed(I2C_ADAP, speed);
+	if (gd->flags & GD_FLG_RELOC)
+		I2C_ADAP->speed = ret;
+
+	return ret;
+}
+
+unsigned int i2c_get_bus_speed(void)
+{
+	struct i2c_adapter *cur = I2C_ADAP;
+	return cur->speed;
+}
+
+uint8_t i2c_reg_read(uint8_t addr, uint8_t reg)
+{
+	uint8_t buf;
+
+#ifdef CONFIG_8xx
+	/* MPC8xx needs this.  Maybe one day we can get rid of it. */
+	/* maybe it is now the time for it ... */
+	i2c_set_bus_num(i2c_get_bus_num());
+#endif
+	i2c_read(addr, reg, 1, &buf, 1);
+
+#ifdef DEBUG
+	printf("%s: bus=%d addr=0x%02x, reg=0x%02x, val=0x%02x\n",
+	       __func__, i2c_get_bus_num(), addr, reg, buf);
+#endif
+
+	return buf;
+}
+
+void i2c_reg_write(uint8_t addr, uint8_t reg, uint8_t val)
+{
+#ifdef CONFIG_8xx
+	/* MPC8xx needs this.  Maybe one day we can get rid of it. */
+	/* maybe it is now the time for it ... */
+	i2c_set_bus_num(i2c_get_bus_num());
+#endif
+
+#ifdef DEBUG
+	printf("%s: bus=%d addr=0x%02x, reg=0x%02x, val=0x%02x\n",
+	       __func__, i2c_get_bus_num(), addr, reg, val);
+#endif
+
+	i2c_write(addr, reg, 1, &val, 1);
+}
+
+void __i2c_init(int speed, int slaveaddr)
+{
+	i2c_init_bus(i2c_get_bus_num(), speed, slaveaddr);
+}
+void i2c_init(int speed, int slaveaddr)
+	__attribute__((weak, alias("__i2c_init")));
diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c
index 3eadbac0cd..06ba4e39f1 100644
--- a/drivers/i2c/mxc_i2c.c
+++ b/drivers/i2c/mxc_i2c.c
@@ -22,6 +22,15 @@
 #include <i2c.h>
 #include <watchdog.h>
 
+#ifdef I2C_QUIRK_REG
+struct mxc_i2c_regs {
+	uint8_t		iadr;
+	uint8_t		ifdr;
+	uint8_t		i2cr;
+	uint8_t		i2sr;
+	uint8_t		i2dr;
+};
+#else
 struct mxc_i2c_regs {
 	uint32_t	iadr;
 	uint32_t	ifdr;
@@ -29,8 +38,8 @@ struct mxc_i2c_regs {
 	uint32_t	i2sr;
 	uint32_t	i2dr;
 };
+#endif
 
-#define I2CR_IEN	(1 << 7)
 #define I2CR_IIEN	(1 << 6)
 #define I2CR_MSTA	(1 << 5)
 #define I2CR_MTX	(1 << 4)
@@ -43,10 +52,39 @@ struct mxc_i2c_regs {
 #define I2SR_IIF	(1 << 1)
 #define I2SR_RX_NO_AK	(1 << 0)
 
+#ifdef I2C_QUIRK_REG
+#define I2CR_IEN	(0 << 7)
+#define I2CR_IDIS	(1 << 7)
+#define I2SR_IIF_CLEAR	(1 << 1)
+#else
+#define I2CR_IEN	(1 << 7)
+#define I2CR_IDIS	(0 << 7)
+#define I2SR_IIF_CLEAR	(0 << 1)
+#endif
+
 #if defined(CONFIG_HARD_I2C) && !defined(CONFIG_SYS_I2C_BASE)
 #error "define CONFIG_SYS_I2C_BASE to use the mxc_i2c driver"
 #endif
 
+#ifdef I2C_QUIRK_REG
+static u16 i2c_clk_div[60][2] = {
+	{ 20,	0x00 }, { 22,	0x01 }, { 24,	0x02 }, { 26,	0x03 },
+	{ 28,	0x04 },	{ 30,	0x05 },	{ 32,	0x09 }, { 34,	0x06 },
+	{ 36,	0x0A }, { 40,	0x07 }, { 44,	0x0C }, { 48,	0x0D },
+	{ 52,	0x43 },	{ 56,	0x0E }, { 60,	0x45 }, { 64,	0x12 },
+	{ 68,	0x0F },	{ 72,	0x13 },	{ 80,	0x14 },	{ 88,	0x15 },
+	{ 96,	0x19 },	{ 104,	0x16 },	{ 112,	0x1A },	{ 128,	0x17 },
+	{ 136,	0x4F }, { 144,	0x1C },	{ 160,	0x1D }, { 176,	0x55 },
+	{ 192,	0x1E }, { 208,	0x56 },	{ 224,	0x22 }, { 228,	0x24 },
+	{ 240,	0x1F },	{ 256,	0x23 }, { 288,	0x5C },	{ 320,	0x25 },
+	{ 384,	0x26 }, { 448,	0x2A },	{ 480,	0x27 }, { 512,	0x2B },
+	{ 576,	0x2C },	{ 640,	0x2D },	{ 768,	0x31 }, { 896,	0x32 },
+	{ 960,	0x2F },	{ 1024,	0x33 },	{ 1152,	0x34 }, { 1280,	0x35 },
+	{ 1536,	0x36 }, { 1792,	0x3A },	{ 1920,	0x37 },	{ 2048,	0x3B },
+	{ 2304,	0x3C },	{ 2560,	0x3D },	{ 3072,	0x3E }, { 3584,	0x7A },
+	{ 3840,	0x3F }, { 4096,	0x7B }, { 5120,	0x7D },	{ 6144,	0x7E },
+};
+#else
 static u16 i2c_clk_div[50][2] = {
 	{ 22,	0x20 }, { 24,	0x21 }, { 26,	0x22 }, { 28,	0x23 },
 	{ 30,	0x00 }, { 32,	0x24 }, { 36,	0x25 }, { 40,	0x26 },
@@ -62,6 +100,7 @@ static u16 i2c_clk_div[50][2] = {
 	{ 1920,	0x1B }, { 2048,	0x3F }, { 2304,	0x1C }, { 2560,	0x1D },
 	{ 3072,	0x1E }, { 3840,	0x1F }
 };
+#endif
 
 /*
  * Calculate and set proper clock divider
@@ -109,7 +148,7 @@ static int bus_i2c_set_bus_speed(void *base, int speed)
 	writeb(idx, &i2c_regs->ifdr);
 
 	/* Reset module */
-	writeb(0, &i2c_regs->i2cr);
+	writeb(I2CR_IDIS, &i2c_regs->i2cr);
 	writeb(0, &i2c_regs->i2sr);
 	return 0;
 }
@@ -141,7 +180,11 @@ static int wait_for_sr_state(struct mxc_i2c_regs *i2c_regs, unsigned state)
 	for (;;) {
 		sr = readb(&i2c_regs->i2sr);
 		if (sr & I2SR_IAL) {
+#ifdef I2C_QUIRK_REG
+			writeb(sr | I2SR_IAL, &i2c_regs->i2sr);
+#else
 			writeb(sr & ~I2SR_IAL, &i2c_regs->i2sr);
+#endif
 			printf("%s: Arbitration lost sr=%x cr=%x state=%x\n",
 				__func__, sr, readb(&i2c_regs->i2cr), state);
 			return -ERESTART;
@@ -162,7 +205,7 @@ static int tx_byte(struct mxc_i2c_regs *i2c_regs, u8 byte)
 {
 	int ret;
 
-	writeb(0, &i2c_regs->i2sr);
+	writeb(I2SR_IIF_CLEAR, &i2c_regs->i2sr);
 	writeb(byte, &i2c_regs->i2dr);
 	ret = wait_for_sr_state(i2c_regs, ST_IIF);
 	if (ret < 0)
@@ -198,14 +241,18 @@ static int i2c_init_transfer_(struct mxc_i2c_regs *i2c_regs,
 	int ret;
 
 	/* Enable I2C controller */
+#ifdef I2C_QUIRK_REG
+	if (readb(&i2c_regs->i2cr) & I2CR_IDIS) {
+#else
 	if (!(readb(&i2c_regs->i2cr) & I2CR_IEN)) {
+#endif
 		writeb(I2CR_IEN, &i2c_regs->i2cr);
 		/* Wait for controller to be stable */
 		udelay(50);
 	}
 	if (readb(&i2c_regs->iadr) == (chip << 1))
 		writeb((chip << 1) ^ 2, &i2c_regs->iadr);
-	writeb(0, &i2c_regs->i2sr);
+	writeb(I2SR_IIF_CLEAR, &i2c_regs->i2sr);
 	ret = wait_for_sr_state(i2c_regs, ST_BUS_IDLE);
 	if (ret < 0)
 		return ret;
@@ -253,7 +300,8 @@ static int i2c_init_transfer(struct mxc_i2c_regs *i2c_regs,
 		printf("%s: failed for chip 0x%x retry=%d\n", __func__, chip,
 				retry);
 		if (ret != -ERESTART)
-			writeb(0, &i2c_regs->i2cr);	/* Disable controller */
+			/* Disable controller */
+			writeb(I2CR_IDIS, &i2c_regs->i2cr);
 		udelay(100);
 		if (i2c_idle_bus(i2c_regs) < 0)
 			break;
@@ -293,7 +341,7 @@ int bus_i2c_read(void *base, uchar chip, uint addr, int alen, uchar *buf,
 	if (len == 1)
 		temp |= I2CR_TX_NO_AK;
 	writeb(temp, &i2c_regs->i2cr);
-	writeb(0, &i2c_regs->i2sr);
+	writeb(I2SR_IIF_CLEAR, &i2c_regs->i2sr);
 	readb(&i2c_regs->i2dr);		/* dummy read to clear ICF */
 
 	/* read data */
@@ -315,7 +363,7 @@ int bus_i2c_read(void *base, uchar chip, uint addr, int alen, uchar *buf,
 			temp |= I2CR_TX_NO_AK;
 			writeb(temp, &i2c_regs->i2cr);
 		}
-		writeb(0, &i2c_regs->i2sr);
+		writeb(I2SR_IIF_CLEAR, &i2c_regs->i2sr);
 		buf[i] = readb(&i2c_regs->i2dr);
 	}
 	i2c_imx_stop(i2c_regs);
diff --git a/drivers/i2c/ppc4xx_i2c.c b/drivers/i2c/ppc4xx_i2c.c
index 52929ebc4e..e7a15ba644 100644
--- a/drivers/i2c/ppc4xx_i2c.c
+++ b/drivers/i2c/ppc4xx_i2c.c
@@ -16,27 +16,29 @@
 #include <i2c.h>
 #include <asm/io.h>
 
-#ifdef CONFIG_HARD_I2C
-
 DECLARE_GLOBAL_DATA_PTR;
 
-#if defined(CONFIG_I2C_MULTI_BUS)
-/*
- * Initialize the bus pointer to whatever one the SPD EEPROM is on.
- * Default is bus 0.  This is necessary because the DDR initialization
- * runs from ROM, and we can't switch buses because we can't modify
- * the global variables.
- */
-#ifndef CONFIG_SYS_SPD_BUS_NUM
-#define CONFIG_SYS_SPD_BUS_NUM	0
+static inline struct ppc4xx_i2c *ppc4xx_get_i2c(int hwadapnr)
+{
+	unsigned long base;
+
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+	defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+	defined(CONFIG_460EX) || defined(CONFIG_460GT)
+	base = CONFIG_SYS_PERIPHERAL_BASE + 0x00000700 + (hwadapnr * 0x100);
+#elif defined(CONFIG_440) || defined(CONFIG_405EX)
+/* all remaining 440 variants */
+	base = CONFIG_SYS_PERIPHERAL_BASE + 0x00000400 + (hwadapnr * 0x100);
+#else
+/* all 405 variants */
+	base = 0xEF600500 + (hwadapnr * 0x100);
 #endif
-static unsigned int i2c_bus_num __attribute__ ((section (".data"))) =
-	CONFIG_SYS_SPD_BUS_NUM;
-#endif /* CONFIG_I2C_MULTI_BUS */
+	return (struct ppc4xx_i2c *)base;
+}
 
-static void _i2c_bus_reset(void)
+static void _i2c_bus_reset(struct i2c_adapter *adap)
 {
-	struct ppc4xx_i2c *i2c = (struct ppc4xx_i2c *)I2C_BASE_ADDR;
+	struct ppc4xx_i2c *i2c = ppc4xx_get_i2c(adap->hwadapnr);
 	int i;
 	u8 dc;
 
@@ -75,11 +77,10 @@ static void _i2c_bus_reset(void)
 	out_8(&i2c->xtcntlss, 0);
 }
 
-void i2c_init(int speed, int slaveaddr)
+static void ppc4xx_i2c_init(struct i2c_adapter *adap, int speed, int slaveaddr)
 {
-	struct ppc4xx_i2c *i2c;
+	struct ppc4xx_i2c *i2c = ppc4xx_get_i2c(adap->hwadapnr);
 	int val, divisor;
-	int bus;
 
 #ifdef CONFIG_SYS_I2C_INIT_BOARD
 	/*
@@ -90,67 +91,57 @@ void i2c_init(int speed, int slaveaddr)
 	i2c_init_board();
 #endif
 
-	for (bus = 0; bus < CONFIG_SYS_MAX_I2C_BUS; bus++) {
-		I2C_SET_BUS(bus);
-
-		/* Set i2c pointer after calling I2C_SET_BUS() */
-		i2c = (struct ppc4xx_i2c *)I2C_BASE_ADDR;
-
-		/* Handle possible failed I2C state */
-		/* FIXME: put this into i2c_init_board()? */
-		_i2c_bus_reset();
+	/* Handle possible failed I2C state */
+	/* FIXME: put this into i2c_init_board()? */
+	_i2c_bus_reset(adap);
 
-		/* clear lo master address */
-		out_8(&i2c->lmadr, 0);
+	/* clear lo master address */
+	out_8(&i2c->lmadr, 0);
 
-		/* clear hi master address */
-		out_8(&i2c->hmadr, 0);
-
-		/* clear lo slave address */
-		out_8(&i2c->lsadr, 0);
+	/* clear hi master address */
+	out_8(&i2c->hmadr, 0);
 
-		/* clear hi slave address */
-		out_8(&i2c->hsadr, 0);
+	/* clear lo slave address */
+	out_8(&i2c->lsadr, 0);
 
-		/* Clock divide Register */
-		/* set divisor according to freq_opb */
-		divisor = (get_OPB_freq() - 1) / 10000000;
-		if (divisor == 0)
-			divisor = 1;
-		out_8(&i2c->clkdiv, divisor);
+	/* clear hi slave address */
+	out_8(&i2c->hsadr, 0);
 
-		/* no interrupts */
-		out_8(&i2c->intrmsk, 0);
+	/* Clock divide Register */
+	/* set divisor according to freq_opb */
+	divisor = (get_OPB_freq() - 1) / 10000000;
+	if (divisor == 0)
+		divisor = 1;
+	out_8(&i2c->clkdiv, divisor);
 
-		/* clear transfer count */
-		out_8(&i2c->xfrcnt, 0);
+	/* no interrupts */
+	out_8(&i2c->intrmsk, 0);
 
-		/* clear extended control & stat */
-		/* write 1 in SRC SRS SWC SWS to clear these fields */
-		out_8(&i2c->xtcntlss, 0xF0);
+	/* clear transfer count */
+	out_8(&i2c->xfrcnt, 0);
 
-		/* Mode Control Register
-		   Flush Slave/Master data buffer */
-		out_8(&i2c->mdcntl, IIC_MDCNTL_FSDB | IIC_MDCNTL_FMDB);
+	/* clear extended control & stat */
+	/* write 1 in SRC SRS SWC SWS to clear these fields */
+	out_8(&i2c->xtcntlss, 0xF0);
 
-		val = in_8(&i2c->mdcntl);
+	/* Mode Control Register
+	   Flush Slave/Master data buffer */
+	out_8(&i2c->mdcntl, IIC_MDCNTL_FSDB | IIC_MDCNTL_FMDB);
 
-		/* Ignore General Call, slave transfers are ignored,
-		 * disable interrupts, exit unknown bus state, enable hold
-		 * SCL 100kHz normaly or FastMode for 400kHz and above
-		 */
+	val = in_8(&i2c->mdcntl);
 
-		val |= IIC_MDCNTL_EUBS | IIC_MDCNTL_HSCL;
-		if (speed >= 400000)
-			val |= IIC_MDCNTL_FSM;
-		out_8(&i2c->mdcntl, val);
+	/* Ignore General Call, slave transfers are ignored,
+	 * disable interrupts, exit unknown bus state, enable hold
+	 * SCL 100kHz normaly or FastMode for 400kHz and above
+	 */
 
-		/* clear control reg */
-		out_8(&i2c->cntl, 0x00);
-	}
+	val |= IIC_MDCNTL_EUBS | IIC_MDCNTL_HSCL;
+	if (speed >= 400000)
+		val |= IIC_MDCNTL_FSM;
+	out_8(&i2c->mdcntl, val);
 
-	/* set to SPD bus as default bus upon powerup */
-	I2C_SET_BUS(CONFIG_SYS_SPD_BUS_NUM);
+	/* clear control reg */
+	out_8(&i2c->cntl, 0x00);
 }
 
 /*
@@ -178,14 +169,15 @@ void i2c_init(int speed, int slaveaddr)
  *
  * It does not check XFRCNT.
  */
-static int i2c_transfer(unsigned char cmd_type,
+static int _i2c_transfer(struct i2c_adapter *adap,
+			unsigned char cmd_type,
 			unsigned char chip,
 			unsigned char addr[],
 			unsigned char addr_len,
 			unsigned char data[],
 			unsigned short data_len)
 {
-	struct ppc4xx_i2c *i2c = (struct ppc4xx_i2c *)I2C_BASE_ADDR;
+	struct ppc4xx_i2c *i2c = ppc4xx_get_i2c(adap->hwadapnr);
 	u8 *ptr;
 	int reading;
 	int tran, cnt;
@@ -329,7 +321,7 @@ static int i2c_transfer(unsigned char cmd_type,
 	return result;
 }
 
-int i2c_probe(uchar chip)
+static int ppc4xx_i2c_probe(struct i2c_adapter *adap, uchar chip)
 {
 	uchar buf[1];
 
@@ -340,11 +332,11 @@ int i2c_probe(uchar chip)
 	 * address was <ACK>ed (i.e. there was a chip at that address which
 	 * drove the data line low).
 	 */
-	return (i2c_transfer(1, chip << 1, 0, 0, buf, 1) != 0);
+	return (_i2c_transfer(adap, 1, chip << 1, 0, 0, buf, 1) != 0);
 }
 
-static int ppc4xx_i2c_transfer(uchar chip, uint addr, int alen, uchar *buffer,
-			       int len, int read)
+static int ppc4xx_i2c_transfer(struct i2c_adapter *adap, uchar chip, uint addr,
+			       int alen, uchar *buffer, int len, int read)
 {
 	uchar xaddr[4];
 	int ret;
@@ -378,43 +370,50 @@ static int ppc4xx_i2c_transfer(uchar chip, uint addr, int alen, uchar *buffer,
 		chip |= ((addr >> (alen * 8)) &
 			 CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
 #endif
-	if ((ret = i2c_transfer(read, chip << 1, &xaddr[4 - alen], alen,
-				buffer, len)) != 0) {
+	ret = _i2c_transfer(adap, read, chip << 1, &xaddr[4 - alen], alen,
+			    buffer, len);
+	if (ret) {
 		printf("I2C %s: failed %d\n", read ? "read" : "write", ret);
-
 		return 1;
 	}
 
 	return 0;
 }
 
-int i2c_read(uchar chip, uint addr, int alen, uchar * buffer, int len)
+static int ppc4xx_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr,
+			   int alen, uchar *buffer, int len)
 {
-	return ppc4xx_i2c_transfer(chip, addr, alen, buffer, len, 1);
+	return ppc4xx_i2c_transfer(adap, chip, addr, alen, buffer, len, 1);
 }
 
-int i2c_write(uchar chip, uint addr, int alen, uchar * buffer, int len)
+static int ppc4xx_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr,
+			    int alen, uchar *buffer, int len)
 {
-	return ppc4xx_i2c_transfer(chip, addr, alen, buffer, len, 0);
+	return ppc4xx_i2c_transfer(adap, chip, addr, alen, buffer, len, 0);
 }
 
-#if defined(CONFIG_I2C_MULTI_BUS)
-/*
- * Functions for multiple I2C bus handling
- */
-unsigned int i2c_get_bus_num(void)
+static unsigned int ppc4xx_i2c_set_bus_speed(struct i2c_adapter *adap,
+					     unsigned int speed)
 {
-	return i2c_bus_num;
-}
-
-int i2c_set_bus_num(unsigned int bus)
-{
-	if (bus >= CONFIG_SYS_MAX_I2C_BUS)
+	if (speed != adap->speed)
 		return -1;
-
-	i2c_bus_num = bus;
-
-	return 0;
+	return speed;
 }
-#endif	/* CONFIG_I2C_MULTI_BUS */
-#endif	/* CONFIG_HARD_I2C */
+
+/*
+ * Register ppc4xx i2c adapters
+ */
+#ifdef CONFIG_SYS_I2C_PPC4XX_CH0
+U_BOOT_I2C_ADAP_COMPLETE(ppc4xx_0, ppc4xx_i2c_init, ppc4xx_i2c_probe,
+			 ppc4xx_i2c_read, ppc4xx_i2c_write,
+			 ppc4xx_i2c_set_bus_speed,
+			 CONFIG_SYS_I2C_PPC4XX_SPEED_0,
+			 CONFIG_SYS_I2C_PPC4XX_SLAVE_0, 0)
+#endif
+#ifdef CONFIG_SYS_I2C_PPC4XX_CH1
+U_BOOT_I2C_ADAP_COMPLETE(ppc4xx_1, ppc4xx_i2c_init, ppc4xx_i2c_probe,
+			 ppc4xx_i2c_read, ppc4xx_i2c_write,
+			 ppc4xx_i2c_set_bus_speed,
+			 CONFIG_SYS_I2C_PPC4XX_SPEED_1,
+			 CONFIG_SYS_I2C_PPC4XX_SLAVE_1, 1)
+#endif
diff --git a/drivers/i2c/soft_i2c.c b/drivers/i2c/soft_i2c.c
index 0a1423016e..a2baec0ace 100644
--- a/drivers/i2c/soft_i2c.c
+++ b/drivers/i2c/soft_i2c.c
@@ -1,4 +1,8 @@
 /*
+ * (C) Copyright 2009
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ * Changes for multibus/multiadapter I2C support.
+ *
  * (C) Copyright 2001, 2002
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
@@ -87,14 +91,30 @@
 
 /* #define	DEBUG_I2C	*/
 
-#ifdef DEBUG_I2C
 DECLARE_GLOBAL_DATA_PTR;
+
+#ifndef	I2C_SOFT_DECLARATIONS
+# if defined(CONFIG_MPC8260)
+#  define I2C_SOFT_DECLARATIONS volatile ioport_t *iop = \
+		ioport_addr((immap_t *)CONFIG_SYS_IMMR, I2C_PORT);
+# elif defined(CONFIG_8xx)
+#  define I2C_SOFT_DECLARATIONS	volatile immap_t *immr = \
+		(immap_t *)CONFIG_SYS_IMMR;
+# else
+#  define I2C_SOFT_DECLARATIONS
+# endif
+#endif
+
+#if !defined(CONFIG_SYS_SOFT_I2C_SPEED)
+#define CONFIG_SYS_SOFT_I2C_SPEED CONFIG_SYS_I2C_SPEED
+#endif
+#if !defined(CONFIG_SYS_SOFT_I2C_SLAVE)
+#define CONFIG_SYS_SOFT_I2C_SLAVE CONFIG_SYS_I2C_SLAVE
 #endif
 
 /*-----------------------------------------------------------------------
  * Definitions
  */
-
 #define RETRIES		0
 
 #define I2C_ACK		0		/* PD_SDA level to ack a byte */
@@ -109,10 +129,6 @@ DECLARE_GLOBAL_DATA_PTR;
 #define PRINTD(fmt,args...)
 #endif
 
-#if defined(CONFIG_I2C_MULTI_BUS)
-static unsigned int i2c_bus_num __attribute__ ((section (".data"))) = 0;
-#endif /* CONFIG_I2C_MULTI_BUS */
-
 /*-----------------------------------------------------------------------
  * Local functions
  */
@@ -251,39 +267,6 @@ static int write_byte(uchar data)
 	return(nack);	/* not a nack is an ack */
 }
 
-#if defined(CONFIG_I2C_MULTI_BUS)
-/*
- * Functions for multiple I2C bus handling
- */
-unsigned int i2c_get_bus_num(void)
-{
-	return i2c_bus_num;
-}
-
-int i2c_set_bus_num(unsigned int bus)
-{
-#if defined(CONFIG_I2C_MUX)
-	if (bus < CONFIG_SYS_MAX_I2C_BUS) {
-		i2c_bus_num = bus;
-	} else {
-		int	ret;
-
-		ret = i2x_mux_select_mux(bus);
-		i2c_init_board();
-		if (ret == 0)
-			i2c_bus_num = bus;
-		else
-			return ret;
-	}
-#else
-	if (bus >= CONFIG_SYS_MAX_I2C_BUS)
-		return -1;
-	i2c_bus_num = bus;
-#endif
-	return 0;
-}
-#endif
-
 /*-----------------------------------------------------------------------
  * if ack == I2C_ACK, ACK the byte so can continue reading, else
  * send I2C_NOACK to end the read.
@@ -314,14 +297,10 @@ static uchar read_byte(int ack)
 	return(data);
 }
 
-/*=====================================================================*/
-/*                         Public Functions                            */
-/*=====================================================================*/
-
 /*-----------------------------------------------------------------------
  * Initialization
  */
-void i2c_init (int speed, int slaveaddr)
+static void soft_i2c_init(struct i2c_adapter *adap, int speed, int slaveaddr)
 {
 #if defined(CONFIG_SYS_I2C_INIT_BOARD)
 	/* call board specific i2c bus reset routine before accessing the   */
@@ -344,7 +323,7 @@ void i2c_init (int speed, int slaveaddr)
  * completion of EEPROM writes since the chip stops responding until
  * the write completes (typically 10mSec).
  */
-int i2c_probe(uchar addr)
+static int soft_i2c_probe(struct i2c_adapter *adap, uint8_t addr)
 {
 	int rc;
 
@@ -362,7 +341,8 @@ int i2c_probe(uchar addr)
 /*-----------------------------------------------------------------------
  * Read bytes
  */
-int  i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
+static int  soft_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr,
+			int alen, uchar *buffer, int len)
 {
 	int shift;
 	PRINTD("i2c_read: chip %02X addr %02X alen %d buffer %p len %d\n",
@@ -436,7 +416,8 @@ int  i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
 /*-----------------------------------------------------------------------
  * Write bytes
  */
-int  i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
+static int  soft_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr,
+			int alen, uchar *buffer, int len)
 {
 	int shift, failures = 0;
 
@@ -466,3 +447,32 @@ int  i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
 	send_stop();
 	return(failures);
 }
+
+/*
+ * Register soft i2c adapters
+ */
+U_BOOT_I2C_ADAP_COMPLETE(soft0, soft_i2c_init, soft_i2c_probe,
+			 soft_i2c_read, soft_i2c_write, NULL,
+			 CONFIG_SYS_I2C_SOFT_SPEED, CONFIG_SYS_I2C_SOFT_SLAVE,
+			 0)
+#if defined(I2C_SOFT_DECLARATIONS2)
+U_BOOT_I2C_ADAP_COMPLETE(soft1, soft_i2c_init, soft_i2c_probe,
+			 soft_i2c_read, soft_i2c_write, NULL,
+			 CONFIG_SYS_I2C_SOFT_SPEED_2,
+			 CONFIG_SYS_I2C_SOFT_SLAVE_2,
+			 1)
+#endif
+#if defined(I2C_SOFT_DECLARATIONS3)
+U_BOOT_I2C_ADAP_COMPLETE(soft2, soft_i2c_init, soft_i2c_probe,
+			 soft_i2c_read, soft_i2c_write, NULL,
+			 CONFIG_SYS_I2C_SOFT_SPEED_3,
+			 CONFIG_SYS_I2C_SOFT_SLAVE_3,
+			 2)
+#endif
+#if defined(I2C_SOFT_DECLARATIONS4)
+U_BOOT_I2C_ADAP_COMPLETE(soft3, soft_i2c_init, soft_i2c_probe,
+			 soft_i2c_read, soft_i2c_write, NULL,
+			 CONFIG_SYS_I2C_SOFT_SPEED_4,
+			 CONFIG_SYS_I2C_SOFT_SLAVE_4,
+			 3)
+#endif
diff --git a/drivers/i2c/tegra_i2c.c b/drivers/i2c/tegra_i2c.c
index e96d5d5d09..9ac3969a07 100644
--- a/drivers/i2c/tegra_i2c.c
+++ b/drivers/i2c/tegra_i2c.c
@@ -19,8 +19,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-static unsigned int i2c_bus_num;
-
 /* Information about i2c controller */
 struct i2c_bus {
 	int			id;
@@ -268,7 +266,8 @@ exit:
 	return error;
 }
 
-static int tegra_i2c_write_data(u32 addr, u8 *data, u32 len)
+static int tegra_i2c_write_data(struct i2c_bus *bus, u32 addr, u8 *data,
+				u32 len)
 {
 	int error;
 	struct i2c_trans_info trans_info;
@@ -279,14 +278,15 @@ static int tegra_i2c_write_data(u32 addr, u8 *data, u32 len)
 	trans_info.num_bytes = len;
 	trans_info.is_10bit_address = 0;
 
-	error = send_recv_packets(&i2c_controllers[i2c_bus_num], &trans_info);
+	error = send_recv_packets(bus, &trans_info);
 	if (error)
 		debug("tegra_i2c_write_data: Error (%d) !!!\n", error);
 
 	return error;
 }
 
-static int tegra_i2c_read_data(u32 addr, u8 *data, u32 len)
+static int tegra_i2c_read_data(struct i2c_bus *bus, u32 addr, u8 *data,
+			       u32 len)
 {
 	int error;
 	struct i2c_trans_info trans_info;
@@ -297,7 +297,7 @@ static int tegra_i2c_read_data(u32 addr, u8 *data, u32 len)
 	trans_info.num_bytes = len;
 	trans_info.is_10bit_address = 0;
 
-	error = send_recv_packets(&i2c_controllers[i2c_bus_num], &trans_info);
+	error = send_recv_packets(bus, &trans_info);
 	if (error)
 		debug("tegra_i2c_read_data: Error (%d) !!!\n", error);
 
@@ -308,18 +308,35 @@ static int tegra_i2c_read_data(u32 addr, u8 *data, u32 len)
 #error "Please enable device tree support to use this driver"
 #endif
 
-unsigned int i2c_get_bus_speed(void)
+/**
+ * Check that a bus number is valid and return a pointer to it
+ *
+ * @param bus_num	Bus number to check / return
+ * @return pointer to bus, if valid, else NULL
+ */
+static struct i2c_bus *tegra_i2c_get_bus(struct i2c_adapter *adap)
 {
-	return i2c_controllers[i2c_bus_num].speed;
+	struct i2c_bus *bus;
+
+	bus = &i2c_controllers[adap->hwadapnr];
+	if (!bus->inited) {
+		debug("%s: Bus %u not available\n", __func__, adap->hwadapnr);
+		return NULL;
+	}
+
+	return bus;
 }
 
-int i2c_set_bus_speed(unsigned int speed)
+static unsigned int tegra_i2c_set_bus_speed(struct i2c_adapter *adap,
+			unsigned int speed)
 {
-	struct i2c_bus *i2c_bus;
+	struct i2c_bus *bus;
 
-	i2c_bus = &i2c_controllers[i2c_bus_num];
-	i2c_bus->speed = speed;
-	i2c_init_controller(i2c_bus);
+	bus = tegra_i2c_get_bus(adap);
+	if (!bus)
+		return 0;
+	bus->speed = speed;
+	i2c_init_controller(bus);
 
 	return 0;
 }
@@ -434,7 +451,7 @@ void i2c_init_board(void)
 		return;
 }
 
-void i2c_init(int speed, int slaveaddr)
+static void tegra_i2c_init(struct i2c_adapter *adap, int speed, int slaveaddr)
 {
 	/* This will override the speed selected in the fdt for that port */
 	debug("i2c_init(speed=%u, slaveaddr=0x%x)\n", speed, slaveaddr);
@@ -442,7 +459,7 @@ void i2c_init(int speed, int slaveaddr)
 }
 
 /* i2c write version without the register address */
-int i2c_write_data(uchar chip, uchar *buffer, int len)
+int i2c_write_data(struct i2c_bus *bus, uchar chip, uchar *buffer, int len)
 {
 	int rc;
 
@@ -454,7 +471,7 @@ int i2c_write_data(uchar chip, uchar *buffer, int len)
 	debug("\n");
 
 	/* Shift 7-bit address over for lower-level i2c functions */
-	rc = tegra_i2c_write_data(chip << 1, buffer, len);
+	rc = tegra_i2c_write_data(bus, chip << 1, buffer, len);
 	if (rc)
 		debug("i2c_write_data(): rc=%d\n", rc);
 
@@ -462,13 +479,13 @@ int i2c_write_data(uchar chip, uchar *buffer, int len)
 }
 
 /* i2c read version without the register address */
-int i2c_read_data(uchar chip, uchar *buffer, int len)
+int i2c_read_data(struct i2c_bus *bus, uchar chip, uchar *buffer, int len)
 {
 	int rc;
 
 	debug("inside i2c_read_data():\n");
 	/* Shift 7-bit address over for lower-level i2c functions */
-	rc = tegra_i2c_read_data(chip << 1, buffer, len);
+	rc = tegra_i2c_read_data(bus, chip << 1, buffer, len);
 	if (rc) {
 		debug("i2c_read_data(): rc=%d\n", rc);
 		return rc;
@@ -484,14 +501,18 @@ int i2c_read_data(uchar chip, uchar *buffer, int len)
 }
 
 /* Probe to see if a chip is present. */
-int i2c_probe(uchar chip)
+static int tegra_i2c_probe(struct i2c_adapter *adap, uchar chip)
 {
+	struct i2c_bus *bus;
 	int rc;
 	uchar reg;
 
 	debug("i2c_probe: addr=0x%x\n", chip);
+	bus = tegra_i2c_get_bus(adap);
+	if (!bus)
+		return 1;
 	reg = 0;
-	rc = i2c_write_data(chip, &reg, 1);
+	rc = i2c_write_data(bus, chip, &reg, 1);
 	if (rc) {
 		debug("Error probing 0x%x.\n", chip);
 		return 1;
@@ -506,13 +527,18 @@ static int i2c_addr_ok(const uint addr, const int alen)
 }
 
 /* Read bytes */
-int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
+static int tegra_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr,
+			int alen, uchar *buffer, int len)
 {
+	struct i2c_bus *bus;
 	uint offset;
 	int i;
 
 	debug("i2c_read: chip=0x%x, addr=0x%x, len=0x%x\n",
 				chip, addr, len);
+	bus = tegra_i2c_get_bus(adap);
+	if (!bus)
+		return 1;
 	if (!i2c_addr_ok(addr, alen)) {
 		debug("i2c_read: Bad address %x.%d.\n", addr, alen);
 		return 1;
@@ -524,13 +550,13 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
 				data[alen - i - 1] =
 					(addr + offset) >> (8 * i);
 			}
-			if (i2c_write_data(chip, data, alen)) {
+			if (i2c_write_data(bus, chip, data, alen)) {
 				debug("i2c_read: error sending (0x%x)\n",
 					addr);
 				return 1;
 			}
 		}
-		if (i2c_read_data(chip, buffer + offset, 1)) {
+		if (i2c_read_data(bus, chip, buffer + offset, 1)) {
 			debug("i2c_read: error reading (0x%x)\n", addr);
 			return 1;
 		}
@@ -540,13 +566,18 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
 }
 
 /* Write bytes */
-int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
+static int tegra_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr,
+			int alen, uchar *buffer, int len)
 {
+	struct i2c_bus *bus;
 	uint offset;
 	int i;
 
 	debug("i2c_write: chip=0x%x, addr=0x%x, len=0x%x\n",
 				chip, addr, len);
+	bus = tegra_i2c_get_bus(adap);
+	if (!bus)
+		return 1;
 	if (!i2c_addr_ok(addr, alen)) {
 		debug("i2c_write: Bad address %x.%d.\n", addr, alen);
 		return 1;
@@ -556,7 +587,7 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
 		for (i = 0; i < alen; i++)
 			data[alen - i - 1] = (addr + offset) >> (8 * i);
 		data[alen] = buffer[offset];
-		if (i2c_write_data(chip, data, alen + 1)) {
+		if (i2c_write_data(bus, chip, data, alen + 1)) {
 			debug("i2c_write: error sending (0x%x)\n", addr);
 			return 1;
 		}
@@ -565,30 +596,11 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
 	return 0;
 }
 
-#if defined(CONFIG_I2C_MULTI_BUS)
-/*
- * Functions for multiple I2C bus handling
- */
-unsigned int i2c_get_bus_num(void)
-{
-	return i2c_bus_num;
-}
-
-int i2c_set_bus_num(unsigned int bus)
-{
-	if (bus >= TEGRA_I2C_NUM_CONTROLLERS || !i2c_controllers[bus].inited)
-		return -1;
-	i2c_bus_num = bus;
-
-	return 0;
-}
-#endif
-
 int tegra_i2c_get_dvc_bus_num(void)
 {
 	int i;
 
-	for (i = 0; i < CONFIG_SYS_MAX_I2C_BUS; i++) {
+	for (i = 0; i < TEGRA_I2C_NUM_CONTROLLERS; i++) {
 		struct i2c_bus *bus = &i2c_controllers[i];
 
 		if (bus->inited && bus->is_dvc)
@@ -597,3 +609,19 @@ int tegra_i2c_get_dvc_bus_num(void)
 
 	return -1;
 }
+
+/*
+ * Register soft i2c adapters
+ */
+U_BOOT_I2C_ADAP_COMPLETE(tegra0, tegra_i2c_init, tegra_i2c_probe,
+			 tegra_i2c_read, tegra_i2c_write,
+			 tegra_i2c_set_bus_speed, 100000, 0, 0)
+U_BOOT_I2C_ADAP_COMPLETE(tegra1, tegra_i2c_init, tegra_i2c_probe,
+			 tegra_i2c_read, tegra_i2c_write,
+			 tegra_i2c_set_bus_speed, 100000, 0, 1)
+U_BOOT_I2C_ADAP_COMPLETE(tegra2, tegra_i2c_init, tegra_i2c_probe,
+			 tegra_i2c_read, tegra_i2c_write,
+			 tegra_i2c_set_bus_speed, 100000, 0, 2)
+U_BOOT_I2C_ADAP_COMPLETE(tegra3, tegra_i2c_init, tegra_i2c_probe,
+			 tegra_i2c_read, tegra_i2c_write,
+			 tegra_i2c_set_bus_speed, 100000, 0, 3)