tegra: nand: make ONFI detection work

Add the missing bits to the Tegra NAND driver to make ONFI detection work
properly.

Also add it to the Tegra default config, as it seems to be a reasonable thing
to have it available on all boards that use any kind of NAND.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>

1 files changed, 36 insertions, 0 deletions

diff --git a/drivers/mtd/nand/tegra_nand.c b/drivers/mtd/nand/tegra_nand.c
index 5408c51ffb..4d94cc6f56 100644
--- a/drivers/mtd/nand/tegra_nand.c
+++ b/drivers/mtd/nand/tegra_nand.c
@@ -219,6 +219,34 @@ static uint8_t read_byte(struct mtd_info *mtd)
 }
 
 /**
+ * Read len bytes from the chip into a buffer
+ *
+ * @param mtd	MTD device structure
+ * @param buf	buffer to store data to
+ * @param len	number of bytes to read
+ *
+ * Read function for 8bit bus-width
+ */
+static void read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+	int i, s;
+	unsigned int reg;
+	struct nand_chip *chip = mtd->priv;
+	struct nand_drv *info = (struct nand_drv *)chip->priv;
+
+	for (i = 0; i < len; i += 4) {
+		s = (len - i) > 4 ? 4 : len - i;
+		writel(CMD_PIO | CMD_RX | CMD_A_VALID | CMD_CE0 |
+			((s - 1) << CMD_TRANS_SIZE_SHIFT) | CMD_GO,
+			&info->reg->command);
+		if (!nand_waitfor_cmd_completion(info->reg))
+			puts("Command timeout during read_buf\n");
+		reg = readl(&info->reg->resp);
+		memcpy(buf + i, &reg, s);
+	}
+}
+
+/**
  * Check NAND status to see if it is ready or not
  *
  * @param mtd	MTD device structure
@@ -317,6 +345,7 @@ static void nand_command(struct mtd_info *mtd, unsigned int command,
 	switch (command) {
 	case NAND_CMD_READID:
 		writel(NAND_CMD_READID, &info->reg->cmd_reg1);
+		writel(column & 0xFF, &info->reg->addr_reg1);
 		writel(CMD_GO | CMD_CLE | CMD_ALE | CMD_PIO
 			| CMD_RX |
 			((4 - 1) << CMD_TRANS_SIZE_SHIFT)
@@ -324,6 +353,12 @@ static void nand_command(struct mtd_info *mtd, unsigned int command,
 			&info->reg->command);
 		info->pio_byte_index = 0;
 		break;
+	case NAND_CMD_PARAM:
+		writel(NAND_CMD_PARAM, &info->reg->cmd_reg1);
+		writel(column & 0xFF, &info->reg->addr_reg1);
+		writel(CMD_GO | CMD_CLE | CMD_ALE | CMD_CE0,
+			&info->reg->command);
+		break;
 	case NAND_CMD_READ0:
 		writel(NAND_CMD_READ0, &info->reg->cmd_reg1);
 		writel(NAND_CMD_READSTART, &info->reg->cmd_reg2);
@@ -976,6 +1011,7 @@ int tegra_nand_init(struct nand_chip *nand, int devnum)
 	nand->options = LP_OPTIONS;
 	nand->cmdfunc = nand_command;
 	nand->read_byte = read_byte;
+	nand->read_buf = read_buf;
 	nand->ecc.read_page = nand_read_page_hwecc;
 	nand->ecc.write_page = nand_write_page_hwecc;
 	nand->ecc.read_page_raw = nand_read_page_raw;