spi: xilinx_spi: Driver clean-up

- Zap unneeded macros
- Re-arrange the code
- Removed __attribute__((weak))
- Replace __func__ macro with func names to save macro transition.
- Re-arranged comment lines.
- Arrange driver code in more readable format[1]

[1]  http://patchwork.ozlabs.org/patch/265683/

Signed-off-by: Jagan Teki <jteki@openedev.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>

1 files changed, 57 insertions, 107 deletions

diff --git a/drivers/spi/xilinx_spi.c b/drivers/spi/xilinx_spi.c
index 8073edc5bf..650e494352 100644
--- a/drivers/spi/xilinx_spi.c
+++ b/drivers/spi/xilinx_spi.c
@@ -1,79 +1,31 @@
 /*
  * Xilinx SPI driver
  *
- * supports 8 bit SPI transfers only, with or w/o FIFO
+ * Supports 8 bit SPI transfers only, with or w/o FIFO
  *
- * based on bfin_spi.c, by way of altera_spi.c
- * Copyright (c) 2005-2008 Analog Devices Inc.
- * Copyright (c) 2010 Thomas Chou <thomas@wytron.com.tw>
- * Copyright (c) 2010 Graeme Smecher <graeme.smecher@mail.mcgill.ca>
+ * Based on bfin_spi.c, by way of altera_spi.c
  * Copyright (c) 2012 Stephan Linz <linz@li-pro.net>
+ * Copyright (c) 2010 Graeme Smecher <graeme.smecher@mail.mcgill.ca>
+ * Copyright (c) 2010 Thomas Chou <thomas@wytron.com.tw>
+ * Copyright (c) 2005-2008 Analog Devices Inc.
  *
  * SPDX-License-Identifier:	GPL-2.0+
- *
- * [0]: http://www.xilinx.com/support/documentation
- *
- * [S]:	[0]/ip_documentation/xps_spi.pdf
- *	[0]/ip_documentation/axi_spi_ds742.pdf
  */
+
 #include <config.h>
 #include <common.h>
 #include <malloc.h>
 #include <spi.h>
 
 /*
- * Xilinx SPI Register Definition
+ * [0]: http://www.xilinx.com/support/documentation
  *
+ * Xilinx SPI Register Definitions
  * [1]:	[0]/ip_documentation/xps_spi.pdf
  *	page 8, Register Descriptions
  * [2]:	[0]/ip_documentation/axi_spi_ds742.pdf
  *	page 7, Register Overview Table
  */
-struct xilinx_spi_reg {
-	u32 __space0__[7];
-	u32 dgier;	/* Device Global Interrupt Enable Register (DGIER) */
-	u32 ipisr;	/* IP Interrupt Status Register (IPISR) */
-	u32 __space1__;
-	u32 ipier;	/* IP Interrupt Enable Register (IPIER) */
-	u32 __space2__[5];
-	u32 srr;	/* Softare Reset Register (SRR) */
-	u32 __space3__[7];
-	u32 spicr;	/* SPI Control Register (SPICR) */
-	u32 spisr;	/* SPI Status Register (SPISR) */
-	u32 spidtr;	/* SPI Data Transmit Register (SPIDTR) */
-	u32 spidrr;	/* SPI Data Receive Register (SPIDRR) */
-	u32 spissr;	/* SPI Slave Select Register (SPISSR) */
-	u32 spitfor;	/* SPI Transmit FIFO Occupancy Register (SPITFOR) */
-	u32 spirfor;	/* SPI Receive FIFO Occupancy Register (SPIRFOR) */
-};
-
-/* Device Global Interrupt Enable Register (dgier), [1] p15, [2] p15 */
-#define DGIER_GIE		(1 << 31)
-
-/* IP Interrupt Status Register (ipisr), [1] p15, [2] p15 */
-#define IPISR_DRR_NOT_EMPTY	(1 << 8)
-#define IPISR_SLAVE_SELECT	(1 << 7)
-#define IPISR_TXF_HALF_EMPTY	(1 << 6)
-#define IPISR_DRR_OVERRUN	(1 << 5)
-#define IPISR_DRR_FULL		(1 << 4)
-#define IPISR_DTR_UNDERRUN	(1 << 3)
-#define IPISR_DTR_EMPTY		(1 << 2)
-#define IPISR_SLAVE_MODF	(1 << 1)
-#define IPISR_MODF		(1 << 0)
-
-/* IP Interrupt Enable Register (ipier), [1] p17, [2] p18 */
-#define IPIER_DRR_NOT_EMPTY	(1 << 8)
-#define IPIER_SLAVE_SELECT	(1 << 7)
-#define IPIER_TXF_HALF_EMPTY	(1 << 6)
-#define IPIER_DRR_OVERRUN	(1 << 5)
-#define IPIER_DRR_FULL		(1 << 4)
-#define IPIER_DTR_UNDERRUN	(1 << 3)
-#define IPIER_DTR_EMPTY		(1 << 2)
-#define IPIER_SLAVE_MODF	(1 << 1)
-#define IPIER_MODF		(1 << 0)
-
-/* Softare Reset Register (srr), [1] p9, [2] p8 */
-#define SRR_RESET_CODE		0x0000000A
 
 /* SPI Control Register (spicr), [1] p9, [2] p8 */
 #define SPICR_LSB_FIRST		(1 << 9)
@@ -110,17 +62,42 @@ struct xilinx_spi_reg {
 #define SPISSR_ACT(cs)		~SPISSR_MASK(cs)
 #define SPISSR_OFF		~0UL
 
-/* SPI Transmit FIFO Occupancy Register (spitfor), [1] p13, [2] p14 */
-#define SPITFOR_OCYVAL_POS	0
-#define SPITFOR_OCYVAL_MASK	(0xf << SPITFOR_OCYVAL_POS)
-
-/* SPI Receive FIFO Occupancy Register (spirfor), [1] p14, [2] p14 */
-#define SPIRFOR_OCYVAL_POS	0
-#define SPIRFOR_OCYVAL_MASK	(0xf << SPIRFOR_OCYVAL_POS)
-
 /* SPI Software Reset Register (ssr) */
 #define SPISSR_RESET_VALUE	0x0a
 
+#define XILSPI_MAX_XFER_BITS	8
+#define XILSPI_SPICR_DFLT_ON	(SPICR_MANUAL_SS | SPICR_MASTER_MODE | \
+				SPICR_SPE)
+#define XILSPI_SPICR_DFLT_OFF	(SPICR_MASTER_INHIBIT | SPICR_MANUAL_SS)
+
+#ifndef CONFIG_XILINX_SPI_IDLE_VAL
+#define CONFIG_XILINX_SPI_IDLE_VAL	0xff
+#endif
+
+#ifndef CONFIG_SYS_XILINX_SPI_LIST
+#define CONFIG_SYS_XILINX_SPI_LIST	{ CONFIG_SYS_SPI_BASE }
+#endif
+
+/* xilinx spi register set */
+struct xilinx_spi_reg {
+	u32 __space0__[7];
+	u32 dgier;	/* Device Global Interrupt Enable Register (DGIER) */
+	u32 ipisr;	/* IP Interrupt Status Register (IPISR) */
+	u32 __space1__;
+	u32 ipier;	/* IP Interrupt Enable Register (IPIER) */
+	u32 __space2__[5];
+	u32 srr;	/* Softare Reset Register (SRR) */
+	u32 __space3__[7];
+	u32 spicr;	/* SPI Control Register (SPICR) */
+	u32 spisr;	/* SPI Status Register (SPISR) */
+	u32 spidtr;	/* SPI Data Transmit Register (SPIDTR) */
+	u32 spidrr;	/* SPI Data Receive Register (SPIDRR) */
+	u32 spissr;	/* SPI Slave Select Register (SPISSR) */
+	u32 spitfor;	/* SPI Transmit FIFO Occupancy Register (SPITFOR) */
+	u32 spirfor;	/* SPI Receive FIFO Occupancy Register (SPIRFOR) */
+};
+
+/* xilinx spi slave */
 struct xilinx_spi_slave {
 	struct spi_slave slave;
 	struct xilinx_spi_reg *regs;
@@ -129,37 +106,17 @@ struct xilinx_spi_slave {
 };
 
 static inline struct xilinx_spi_slave *to_xilinx_spi_slave(
-					struct spi_slave *slave)
+			struct spi_slave *slave)
 {
 	return container_of(slave, struct xilinx_spi_slave, slave);
 }
 
-#ifndef CONFIG_SYS_XILINX_SPI_LIST
-#define CONFIG_SYS_XILINX_SPI_LIST	{ CONFIG_SYS_SPI_BASE }
-#endif
-
-#ifndef CONFIG_XILINX_SPI_IDLE_VAL
-#define CONFIG_XILINX_SPI_IDLE_VAL	0xff
-#endif
-
-#define XILSPI_SPICR_DFLT_ON		(SPICR_MANUAL_SS | \
-					 SPICR_MASTER_MODE | \
-					 SPICR_SPE)
-
-#define XILSPI_SPICR_DFLT_OFF		(SPICR_MASTER_INHIBIT | \
-					 SPICR_MANUAL_SS)
-
-#define XILSPI_MAX_XFER_BITS		8
-
 static unsigned long xilinx_spi_base_list[] = CONFIG_SYS_XILINX_SPI_LIST;
-
-__attribute__((weak))
 int spi_cs_is_valid(unsigned int bus, unsigned int cs)
 {
 	return bus < ARRAY_SIZE(xilinx_spi_base_list) && cs < 32;
 }
 
-__attribute__((weak))
 void spi_cs_activate(struct spi_slave *slave)
 {
 	struct xilinx_spi_slave *xilspi = to_xilinx_spi_slave(slave);
@@ -167,7 +124,6 @@ void spi_cs_activate(struct spi_slave *slave)
 	writel(SPISSR_ACT(slave->cs), &xilspi->regs->spissr);
 }
 
-__attribute__((weak))
 void spi_cs_deactivate(struct spi_slave *slave)
 {
 	struct xilinx_spi_slave *xilspi = to_xilinx_spi_slave(slave);
@@ -180,33 +136,26 @@ void spi_init(void)
 	/* do nothing */
 }
 
-void spi_set_speed(struct spi_slave *slave, uint hz)
-{
-	/* xilinx spi core does not support programmable speed */
-}
-
 struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
 				  unsigned int max_hz, unsigned int mode)
 {
 	struct xilinx_spi_slave *xilspi;
 
 	if (!spi_cs_is_valid(bus, cs)) {
-		printf("XILSPI error: %s: unsupported bus %d / cs %d\n",
-				__func__, bus, cs);
+		printf("XILSPI error: unsupported bus %d / cs %d\n", bus, cs);
 		return NULL;
 	}
 
 	xilspi = spi_alloc_slave(struct xilinx_spi_slave, bus, cs);
 	if (!xilspi) {
-		printf("XILSPI error: %s: malloc of SPI structure failed\n",
-				__func__);
+		printf("XILSPI error: malloc of SPI structure failed\n");
 		return NULL;
 	}
 	xilspi->regs = (struct xilinx_spi_reg *)xilinx_spi_base_list[bus];
 	xilspi->freq = max_hz;
 	xilspi->mode = mode;
-	debug("%s: bus:%i cs:%i base:%p mode:%x max_hz:%d\n", __func__,
-		bus, cs, xilspi->regs, xilspi->mode, xilspi->freq);
+	debug("spi_setup_slave: bus:%i cs:%i base:%p mode:%x max_hz:%d\n",
+	      bus, cs, xilspi->regs, xilspi->mode, xilspi->freq);
 
 	writel(SPISSR_RESET_VALUE, &xilspi->regs->srr);
 
@@ -225,7 +174,7 @@ int spi_claim_bus(struct spi_slave *slave)
 	struct xilinx_spi_slave *xilspi = to_xilinx_spi_slave(slave);
 	u32 spicr;
 
-	debug("%s: bus:%i cs:%i\n", __func__, slave->bus, slave->cs);
+	debug("spi_claim_bus: bus:%i cs:%i\n", slave->bus, slave->cs);
 	writel(SPISSR_OFF, &xilspi->regs->spissr);
 
 	spicr = XILSPI_SPICR_DFLT_ON;
@@ -246,7 +195,7 @@ void spi_release_bus(struct spi_slave *slave)
 {
 	struct xilinx_spi_slave *xilspi = to_xilinx_spi_slave(slave);
 
-	debug("%s: bus:%i cs:%i\n", __func__, slave->bus, slave->cs);
+	debug("spi_release_bus: bus:%i cs:%i\n", slave->bus, slave->cs);
 	writel(SPISSR_OFF, &xilspi->regs->spissr);
 	writel(XILSPI_SPICR_DFLT_OFF, &xilspi->regs->spicr);
 }
@@ -262,14 +211,15 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
 	unsigned rxecount = 17;	/* max. 16 elements in FIFO, leftover 1 */
 	unsigned global_timeout;
 
-	debug("%s: bus:%i cs:%i bitlen:%i bytes:%i flags:%lx\n", __func__,
-		slave->bus, slave->cs, bitlen, bytes, flags);
+	debug("spi_xfer: bus:%i cs:%i bitlen:%i bytes:%i flags:%lx\n",
+	      slave->bus, slave->cs, bitlen, bytes, flags);
+
 	if (bitlen == 0)
 		goto done;
 
 	if (bitlen % XILSPI_MAX_XFER_BITS) {
-		printf("XILSPI warning: %s: Not a multiple of %d bits\n",
-				__func__, XILSPI_MAX_XFER_BITS);
+		printf("XILSPI warning: Not a multiple of %d bits\n",
+		       XILSPI_MAX_XFER_BITS);
 		flags |= SPI_XFER_END;
 		goto done;
 	}
@@ -281,7 +231,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
 	}
 
 	if (!rxecount) {
-		printf("XILSPI error: %s: Rx buffer not empty\n", __func__);
+		printf("XILSPI error: Rx buffer not empty\n");
 		return -1;
 	}
 
@@ -296,7 +246,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
 		unsigned timeout = global_timeout;
 		/* get Tx element from data out buffer and count up */
 		unsigned char d = txp ? *txp++ : CONFIG_XILINX_SPI_IDLE_VAL;
-		debug("%s: tx:%x ", __func__, d);
+		debug("spi_xfer: tx:%x ", d);
 
 		/* write out and wait for processing (receive data) */
 		writel(d & SPIDTR_8BIT_MASK, &xilspi->regs->spidtr);
@@ -307,7 +257,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
 		}
 
 		if (!timeout) {
-			printf("XILSPI error: %s: Xfer timeout\n", __func__);
+			printf("XILSPI error: Xfer timeout\n");
 			return -1;
 		}
 
@@ -315,7 +265,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
 		d = readl(&xilspi->regs->spidrr) & SPIDRR_8BIT_MASK;
 		if (rxp)
 			*rxp++ = d;
-		debug("rx:%x\n", d);
+		debug("spi_xfer: rx:%x\n", d);
 	}
 
  done: