Merge branch 'master-sync' of git://git.denx.de/u-boot-arm

9 files changed, 1160 insertions, 310 deletions

diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c24x0_i2c.c
index f0c1aa3406..55c6a12aae 100644
--- a/drivers/i2c/s3c24x0_i2c.c
+++ b/drivers/i2c/s3c24x0_i2c.c
@@ -32,6 +32,8 @@
 #elif defined(CONFIG_S3C2410)
 #include <s3c2410.h>
 #endif
+
+#include <asm/io.h>
 #include <i2c.h>
 
 #ifdef CONFIG_HARD_I2C
@@ -42,142 +44,139 @@
 #define I2C_OK		0
 #define I2C_NOK		1
 #define I2C_NACK	2
-#define I2C_NOK_LA	3		/* Lost arbitration */
-#define I2C_NOK_TOUT	4		/* time out */
-
-#define I2CSTAT_BSY	0x20		/* Busy bit */
-#define I2CSTAT_NACK	0x01		/* Nack bit */
-#define I2CCON_IRPND	0x10		/* Interrupt pending bit */
-#define I2C_MODE_MT	0xC0		/* Master Transmit Mode */
-#define I2C_MODE_MR	0x80		/* Master Receive Mode */
-#define I2C_START_STOP	0x20		/* START / STOP */
-#define I2C_TXRX_ENA	0x10		/* I2C Tx/Rx enable */
+#define I2C_NOK_LA	3	/* Lost arbitration */
+#define I2C_NOK_TOUT	4	/* time out */
 
-#define I2C_TIMEOUT 1			/* 1 second */
+#define I2CSTAT_BSY	0x20	/* Busy bit */
+#define I2CSTAT_NACK	0x01	/* Nack bit */
+#define I2CCON_IRPND	0x10	/* Interrupt pending bit */
+#define I2C_MODE_MT	0xC0	/* Master Transmit Mode */
+#define I2C_MODE_MR	0x80	/* Master Receive Mode */
+#define I2C_START_STOP	0x20	/* START / STOP */
+#define I2C_TXRX_ENA	0x10	/* I2C Tx/Rx enable */
 
+#define I2C_TIMEOUT 1		/* 1 second */
 
 static int GetI2CSDA(void)
 {
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio();
 
 #ifdef CONFIG_S3C2410
-	return (gpio->GPEDAT & 0x8000) >> 15;
+	return (readl(&gpio->GPEDAT) & 0x8000) >> 15;
 #endif
 #ifdef CONFIG_S3C2400
-	return (gpio->PGDAT & 0x0020) >> 5;
+	return (readl(&gpio->PGDAT) & 0x0020) >> 5;
 #endif
 }
 
 #if 0
 static void SetI2CSDA(int x)
 {
-	rGPEDAT = (rGPEDAT & ~0x8000) | (x&1) << 15;
+	rGPEDAT = (rGPEDAT & ~0x8000) | (x & 1) << 15;
 }
 #endif
 
 static void SetI2CSCL(int x)
 {
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio();
 
 #ifdef CONFIG_S3C2410
-	gpio->GPEDAT = (gpio->GPEDAT & ~0x4000) | (x&1) << 14;
+	writel((readl(&gpio->GPEDAT) & ~0x4000) | (x & 1) << 14, &gpio->GPEDAT);
 #endif
 #ifdef CONFIG_S3C2400
-	gpio->PGDAT = (gpio->PGDAT & ~0x0040) | (x&1) << 6;
+	writel((readl(&gpio->PGDAT) & ~0x0040) | (x & 1) << 6, &gpio->PGDAT);
 #endif
 }
 
-
-static int WaitForXfer (void)
+static int WaitForXfer(void)
 {
-	S3C24X0_I2C *const i2c = S3C24X0_GetBase_I2C ();
-	int i, status;
+	struct s3c24x0_i2c *i2c = s3c24x0_get_base_i2c();
+	int i;
 
 	i = I2C_TIMEOUT * 10000;
-	status = i2c->IICCON;
-	while ((i > 0) && !(status & I2CCON_IRPND)) {
-		udelay (100);
-		status = i2c->IICCON;
+	while (!(readl(&i2c->IICCON) & I2CCON_IRPND) && (i > 0)) {
+		udelay(100);
 		i--;
 	}
 
-	return (status & I2CCON_IRPND) ? I2C_OK : I2C_NOK_TOUT;
+	return (readl(&i2c->IICCON) & I2CCON_IRPND) ? I2C_OK : I2C_NOK_TOUT;
 }
 
-static int IsACK (void)
+static int IsACK(void)
 {
-	S3C24X0_I2C *const i2c = S3C24X0_GetBase_I2C ();
+	struct s3c24x0_i2c *i2c = s3c24x0_get_base_i2c();
 
-	return (!(i2c->IICSTAT & I2CSTAT_NACK));
+	return !(readl(&i2c->IICSTAT) & I2CSTAT_NACK);
 }
 
-static void ReadWriteByte (void)
+static void ReadWriteByte(void)
 {
-	S3C24X0_I2C *const i2c = S3C24X0_GetBase_I2C ();
+	struct s3c24x0_i2c *i2c = s3c24x0_get_base_i2c();
 
-	i2c->IICCON &= ~I2CCON_IRPND;
+	writel(readl(&i2c->IICCON) & ~I2CCON_IRPND, &i2c->IICCON);
 }
 
-void i2c_init (int speed, int slaveadd)
+void i2c_init(int speed, int slaveadd)
 {
-	S3C24X0_I2C *const i2c = S3C24X0_GetBase_I2C ();
-	S3C24X0_GPIO *const gpio = S3C24X0_GetBase_GPIO ();
+	struct s3c24x0_i2c *i2c = s3c24x0_get_base_i2c();
+	struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio();
 	ulong freq, pres = 16, div;
-	int i, status;
+	int i;
 
 	/* wait for some time to give previous transfer a chance to finish */
 
 	i = I2C_TIMEOUT * 1000;
-	status = i2c->IICSTAT;
-	while ((i > 0) && (status & I2CSTAT_BSY)) {
-		udelay (1000);
-		status = i2c->IICSTAT;
+	while ((readl(&i2c->IICSTAT) && I2CSTAT_BSY) && (i > 0)) {
+		udelay(1000);
 		i--;
 	}
 
-	if ((status & I2CSTAT_BSY) || GetI2CSDA () == 0) {
+	if ((readl(&i2c->IICSTAT) & I2CSTAT_BSY) || GetI2CSDA() == 0) {
 #ifdef CONFIG_S3C2410
-		ulong old_gpecon = gpio->GPECON;
+		ulong old_gpecon = readl(&gpio->GPECON);
 #endif
 #ifdef CONFIG_S3C2400
-		ulong old_gpecon = gpio->PGCON;
+		ulong old_gpecon = readl(&gpio->PGCON);
 #endif
-		/* bus still busy probably by (most) previously interrupted transfer */
+		/* bus still busy probably by (most) previously interrupted
+		   transfer */
 
 #ifdef CONFIG_S3C2410
 		/* set I2CSDA and I2CSCL (GPE15, GPE14) to GPIO */
-		gpio->GPECON = (gpio->GPECON & ~0xF0000000) | 0x10000000;
+		writel((readl(&gpio->GPECON) & ~0xF0000000) | 0x10000000,
+		       &gpio->GPECON);
 #endif
 #ifdef CONFIG_S3C2400
 		/* set I2CSDA and I2CSCL (PG5, PG6) to GPIO */
-		gpio->PGCON = (gpio->PGCON & ~0x00003c00) | 0x00001000;
+		writel((readl(&gpio->PGCON) & ~0x00003c00) | 0x00001000,
+		       &gpio->PGCON);
 #endif
 
 		/* toggle I2CSCL until bus idle */
-		SetI2CSCL (0);
-		udelay (1000);
+		SetI2CSCL(0);
+		udelay(1000);
 		i = 10;
-		while ((i > 0) && (GetI2CSDA () != 1)) {
-			SetI2CSCL (1);
-			udelay (1000);
-			SetI2CSCL (0);
-			udelay (1000);
+		while ((i > 0) && (GetI2CSDA() != 1)) {
+			SetI2CSCL(1);
+			udelay(1000);
+			SetI2CSCL(0);
+			udelay(1000);
 			i--;
 		}
-		SetI2CSCL (1);
-		udelay (1000);
+		SetI2CSCL(1);
+		udelay(1000);
 
 		/* restore pin functions */
 #ifdef CONFIG_S3C2410
-		gpio->GPECON = old_gpecon;
+		writel(old_gpecon, &gpio->GPECON);
 #endif
 #ifdef CONFIG_S3C2400
-		gpio->PGCON = old_gpecon;
+		writel(old_gpecon, &gpio->PGCON);
 #endif
 	}
 
 	/* calculate prescaler and divisor values */
-	freq = get_PCLK ();
+	freq = get_PCLK();
 	if ((freq / pres / (16 + 1)) > speed)
 		/* set prescaler to 512 */
 		pres = 512;
@@ -188,13 +187,13 @@ void i2c_init (int speed, int slaveadd)
 
 	/* set prescaler, divisor according to freq, also set
 	 * ACKGEN, IRQ */
-	i2c->IICCON = (div & 0x0F) | 0xA0 | ((pres == 512) ? 0x40 : 0);
+	writel((div & 0x0F) | 0xA0 | ((pres == 512) ? 0x40 : 0), &i2c->IICCON);
 
 	/* init to SLAVE REVEIVE and set slaveaddr */
-	i2c->IICSTAT = 0;
-	i2c->IICADD = slaveadd;
+	writel(0, &i2c->IICSTAT);
+	writel(slaveadd, &i2c->IICADD);
 	/* program Master Transmit (and implicit STOP) */
-	i2c->IICSTAT = I2C_MODE_MT | I2C_TXRX_ENA;
+	writel(I2C_MODE_MT | I2C_TXRX_ENA, &i2c->IICSTAT);
 
 }
 
@@ -206,107 +205,109 @@ void i2c_init (int speed, int slaveadd)
  * 0 we skip the address write cycle.
  */
 static
-int i2c_transfer (unsigned char cmd_type,
-		  unsigned char chip,
-		  unsigned char addr[],
-		  unsigned char addr_len,
-		  unsigned char data[], unsigned short data_len)
+int i2c_transfer(unsigned char cmd_type,
+		 unsigned char chip,
+		 unsigned char addr[],
+		 unsigned char addr_len,
+		 unsigned char data[], unsigned short data_len)
 {
-	S3C24X0_I2C *const i2c = S3C24X0_GetBase_I2C ();
-	int i, status, result;
+	struct s3c24x0_i2c *i2c = s3c24x0_get_base_i2c();
+	int i, result;
 
 	if (data == 0 || data_len == 0) {
 		/*Don't support data transfer of no length or to address 0 */
-		printf ("i2c_transfer: bad call\n");
+		printf("i2c_transfer: bad call\n");
 		return I2C_NOK;
 	}
 
 	/* Check I2C bus idle */
 	i = I2C_TIMEOUT * 1000;
-	status = i2c->IICSTAT;
-	while ((i > 0) && (status & I2CSTAT_BSY)) {
-		udelay (1000);
-		status = i2c->IICSTAT;
+	while ((readl(&i2c->IICSTAT) & I2CSTAT_BSY) && (i > 0)) {
+		udelay(1000);
 		i--;
 	}
 
-	if (status & I2CSTAT_BSY)
+	if (readl(&i2c->IICSTAT) & I2CSTAT_BSY)
 		return I2C_NOK_TOUT;
 
-	i2c->IICCON |= 0x80;
+	writel(readl(&i2c->IICCON) | 0x80, &i2c->IICCON);
 	result = I2C_OK;
 
 	switch (cmd_type) {
 	case I2C_WRITE:
 		if (addr && addr_len) {
-			i2c->IICDS = chip;
+			writel(chip, &i2c->IICDS);
 			/* send START */
-			i2c->IICSTAT = I2C_MODE_MT | I2C_TXRX_ENA | I2C_START_STOP;
+			writel(I2C_MODE_MT | I2C_TXRX_ENA | I2C_START_STOP,
+			       &i2c->IICSTAT);
 			i = 0;
 			while ((i < addr_len) && (result == I2C_OK)) {
-				result = WaitForXfer ();
-				i2c->IICDS = addr[i];
-				ReadWriteByte ();
+				result = WaitForXfer();
+				writel(addr[i], &i2c->IICDS);
+				ReadWriteByte();
 				i++;
 			}
 			i = 0;
 			while ((i < data_len) && (result == I2C_OK)) {
-				result = WaitForXfer ();
-				i2c->IICDS = data[i];
-				ReadWriteByte ();
+				result = WaitForXfer();
+				writel(data[i], &i2c->IICDS);
+				ReadWriteByte();
 				i++;
 			}
 		} else {
-			i2c->IICDS = chip;
+			writel(chip, &i2c->IICDS);
 			/* send START */
-			i2c->IICSTAT = I2C_MODE_MT | I2C_TXRX_ENA | I2C_START_STOP;
+			writel(I2C_MODE_MT | I2C_TXRX_ENA | I2C_START_STOP,
+			       &i2c->IICSTAT);
 			i = 0;
 			while ((i < data_len) && (result = I2C_OK)) {
-				result = WaitForXfer ();
-				i2c->IICDS = data[i];
-				ReadWriteByte ();
+				result = WaitForXfer();
+				writel(data[i], &i2c->IICDS);
+				ReadWriteByte();
 				i++;
 			}
 		}
 
 		if (result == I2C_OK)
-			result = WaitForXfer ();
+			result = WaitForXfer();
 
 		/* send STOP */
-		i2c->IICSTAT = I2C_MODE_MR | I2C_TXRX_ENA;
-		ReadWriteByte ();
+		writel(I2C_MODE_MR | I2C_TXRX_ENA, &i2c->IICSTAT);
+		ReadWriteByte();
 		break;
 
 	case I2C_READ:
 		if (addr && addr_len) {
-			i2c->IICSTAT = I2C_MODE_MT | I2C_TXRX_ENA;
-			i2c->IICDS = chip;
+			writel(I2C_MODE_MT | I2C_TXRX_ENA, &i2c->IICSTAT);
+			writel(chip, &i2c->IICDS);
 			/* send START */
-			i2c->IICSTAT |= I2C_START_STOP;
-			result = WaitForXfer ();
-			if (IsACK ()) {
+			writel(readl(&i2c->IICSTAT) | I2C_START_STOP,
+			       &i2c->IICSTAT);
+			result = WaitForXfer();
+			if (IsACK()) {
 				i = 0;
 				while ((i < addr_len) && (result == I2C_OK)) {
-					i2c->IICDS = addr[i];
-					ReadWriteByte ();
-					result = WaitForXfer ();
+					writel(addr[i], &i2c->IICDS);
+					ReadWriteByte();
+					result = WaitForXfer();
 					i++;
 				}
 
-				i2c->IICDS = chip;
+				writel(chip, &i2c->IICDS);
 				/* resend START */
-				i2c->IICSTAT =  I2C_MODE_MR | I2C_TXRX_ENA |
-						I2C_START_STOP;
-				ReadWriteByte ();
-				result = WaitForXfer ();
+				writel(I2C_MODE_MR | I2C_TXRX_ENA |
+				       I2C_START_STOP, &i2c->IICSTAT);
+				ReadWriteByte();
+				result = WaitForXfer();
 				i = 0;
 				while ((i < data_len) && (result == I2C_OK)) {
 					/* disable ACK for final READ */
 					if (i == data_len - 1)
-						i2c->IICCON &= ~0x80;
-					ReadWriteByte ();
-					result = WaitForXfer ();
-					data[i] = i2c->IICDS;
+						writel(readl(&i2c->IICCON)
+						       & ~0x80, &i2c->IICCON);
+					ReadWriteByte();
+					result = WaitForXfer();
+					data[i] = readl(&i2c->IICDS);
 					i++;
 				}
 			} else {
@@ -314,21 +315,23 @@ int i2c_transfer (unsigned char cmd_type,
 			}
 
 		} else {
-			i2c->IICSTAT = I2C_MODE_MR | I2C_TXRX_ENA;
-			i2c->IICDS = chip;
+			writel(I2C_MODE_MR | I2C_TXRX_ENA, &i2c->IICSTAT);
+			writel(chip, &i2c->IICDS);
 			/* send START */
-			i2c->IICSTAT |= I2C_START_STOP;
-			result = WaitForXfer ();
+			writel(readl(&i2c->IICSTAT) | I2C_START_STOP,
+			       &i2c->IICSTAT);
+			result = WaitForXfer();
 
-			if (IsACK ()) {
+			if (IsACK()) {
 				i = 0;
 				while ((i < data_len) && (result == I2C_OK)) {
 					/* disable ACK for final READ */
 					if (i == data_len - 1)
-						i2c->IICCON &= ~0x80;
-					ReadWriteByte ();
-					result = WaitForXfer ();
-					data[i] = i2c->IICDS;
+						writel(readl(&i2c->IICCON) &
+						       ~0x80, &i2c->IICCON);
+					ReadWriteByte();
+					result = WaitForXfer();
+					data[i] = readl(&i2c->IICDS);
 					i++;
 				}
 			} else {
@@ -337,12 +340,12 @@ int i2c_transfer (unsigned char cmd_type,
 		}
 
 		/* send STOP */
-		i2c->IICSTAT = I2C_MODE_MR | I2C_TXRX_ENA;
-		ReadWriteByte ();
+		writel(I2C_MODE_MR | I2C_TXRX_ENA, &i2c->IICSTAT);
+		ReadWriteByte();
 		break;
 
 	default:
-		printf ("i2c_transfer: bad call\n");
+		printf("i2c_transfer: bad call\n");
 		result = I2C_NOK;
 		break;
 	}
@@ -350,7 +353,7 @@ int i2c_transfer (unsigned char cmd_type,
 	return (result);
 }
 
-int i2c_probe (uchar chip)
+int i2c_probe(uchar chip)
 {
 	uchar buf[1];
 
@@ -361,16 +364,16 @@ int i2c_probe (uchar chip)
 	 * address was <ACK>ed (i.e. there was a chip at that address which
 	 * drove the data line low).
 	 */
-	return (i2c_transfer (I2C_READ, chip << 1, 0, 0, buf, 1) != I2C_OK);
+	return i2c_transfer(I2C_READ, chip << 1, 0, 0, buf, 1) != I2C_OK;
 }
 
-int i2c_read (uchar chip, uint addr, int alen, uchar * buffer, int len)
+int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
 {
 	uchar xaddr[4];
 	int ret;
 
 	if (alen > 4) {
-		printf ("I2C read: addr len %d not supported\n", alen);
+		printf("I2C read: addr len %d not supported\n", alen);
 		return 1;
 	}
 
@@ -394,23 +397,24 @@ int i2c_read (uchar chip, uint addr, int alen, uchar * buffer, int len)
 	 * hidden in the chip address.
 	 */
 	if (alen > 0)
-		chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
+		chip |= ((addr >> (alen * 8)) &
+			 CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
 #endif
 	if ((ret =
-	     i2c_transfer (I2C_READ, chip << 1, &xaddr[4 - alen], alen,
-			   buffer, len)) != 0) {
-		printf ("I2c read: failed %d\n", ret);
+	     i2c_transfer(I2C_READ, chip << 1, &xaddr[4 - alen], alen,
+			  buffer, len)) != 0) {
+		printf("I2c read: failed %d\n", ret);
 		return 1;
 	}
 	return 0;
 }
 
-int i2c_write (uchar chip, uint addr, int alen, uchar * buffer, int len)
+int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
 {
 	uchar xaddr[4];
 
 	if (alen > 4) {
-		printf ("I2C write: addr len %d not supported\n", alen);
+		printf("I2C write: addr len %d not supported\n", alen);
 		return 1;
 	}
 
@@ -433,10 +437,11 @@ int i2c_write (uchar chip, uint addr, int alen, uchar * buffer, int len)
 	 * hidden in the chip address.
 	 */
 	if (alen > 0)
-		chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
+		chip |= ((addr >> (alen * 8)) &
+			 CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
 #endif
 	return (i2c_transfer
 		(I2C_WRITE, chip << 1, &xaddr[4 - alen], alen, buffer,
 		 len) != 0);
 }
-#endif	/* CONFIG_HARD_I2C */
+#endif /* CONFIG_HARD_I2C */
diff --git a/drivers/mtd/nand/s3c2410_nand.c b/drivers/mtd/nand/s3c2410_nand.c
index d27a625471..f2f3e722e5 100644
--- a/drivers/mtd/nand/s3c2410_nand.c
+++ b/drivers/mtd/nand/s3c2410_nand.c
@@ -20,29 +20,10 @@
 
 #include <common.h>
 
-#if 0
-#define DEBUGN	printf
-#else
-#define DEBUGN(x, args ...) {}
-#endif
-
 #include <nand.h>
 #include <s3c2410.h>
 #include <asm/io.h>
 
-#define __REGb(x)	(*(volatile unsigned char *)(x))
-#define __REGi(x)	(*(volatile unsigned int *)(x))
-
-#define	NF_BASE		0x4e000000
-#define	NFCONF		__REGi(NF_BASE + 0x0)
-#define	NFCMD		__REGb(NF_BASE + 0x4)
-#define	NFADDR		__REGb(NF_BASE + 0x8)
-#define	NFDATA		__REGb(NF_BASE + 0xc)
-#define	NFSTAT		__REGb(NF_BASE + 0x10)
-#define NFECC0		__REGb(NF_BASE + 0x14)
-#define NFECC1		__REGb(NF_BASE + 0x15)
-#define NFECC2		__REGb(NF_BASE + 0x16)
-
 #define S3C2410_NFCONF_EN          (1<<15)
 #define S3C2410_NFCONF_512BYTE     (1<<14)
 #define S3C2410_NFCONF_4STEP       (1<<13)
@@ -58,11 +39,12 @@
 static void s3c2410_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 {
 	struct nand_chip *chip = mtd->priv;
+	struct s3c2410_nand *nand = s3c2410_get_base_nand();
 
-	DEBUGN("hwcontrol(): 0x%02x 0x%02x\n", cmd, ctrl);
+	debugX(1, "hwcontrol(): 0x%02x 0x%02x\n", cmd, ctrl);
 
 	if (ctrl & NAND_CTRL_CHANGE) {
-		ulong IO_ADDR_W = NF_BASE;
+		ulong IO_ADDR_W = (ulong)nand;
 
 		if (!(ctrl & NAND_CLE))
 			IO_ADDR_W |= S3C2410_ADDR_NCLE;
@@ -72,9 +54,11 @@ static void s3c2410_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 		chip->IO_ADDR_W = (void *)IO_ADDR_W;
 
 		if (ctrl & NAND_NCE)
-			NFCONF &= ~S3C2410_NFCONF_nFCE;
+			writel(readl(&nand->NFCONF) & ~S3C2410_NFCONF_nFCE,
+			       &nand->NFCONF);
 		else
-			NFCONF |= S3C2410_NFCONF_nFCE;
+			writel(readl(&nand->NFCONF) | S3C2410_NFCONF_nFCE,
+			       &nand->NFCONF);
 	}
 
 	if (cmd != NAND_CMD_NONE)
@@ -83,15 +67,17 @@ static void s3c2410_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 
 static int s3c2410_dev_ready(struct mtd_info *mtd)
 {
-	DEBUGN("dev_ready\n");
-	return (NFSTAT & 0x01);
+	struct s3c2410_nand *nand = s3c2410_get_base_nand();
+	debugX(1, "dev_ready\n");
+	return readl(&nand->NFSTAT) & 0x01;
 }
 
 #ifdef CONFIG_S3C2410_NAND_HWECC
 void s3c2410_nand_enable_hwecc(struct mtd_info *mtd, int mode)
 {
-	DEBUGN("s3c2410_nand_enable_hwecc(%p, %d)\n", mtd, mode);
-	NFCONF |= S3C2410_NFCONF_INITECC;
+	struct s3c2410_nand *nand = s3c2410_get_base_nand();
+	debugX(1, "s3c2410_nand_enable_hwecc(%p, %d)\n", mtd, mode);
+	writel(readl(&nand->NFCONF) | S3C2410_NFCONF_INITECC, &nand->NFCONF);
 }
 
 static int s3c2410_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
@@ -100,8 +86,8 @@ static int s3c2410_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
 	ecc_code[0] = NFECC0;
 	ecc_code[1] = NFECC1;
 	ecc_code[2] = NFECC2;
-	DEBUGN("s3c2410_nand_calculate_hwecc(%p,): 0x%02x 0x%02x 0x%02x\n",
-		mtd , ecc_code[0], ecc_code[1], ecc_code[2]);
+	debugX(1, "s3c2410_nand_calculate_hwecc(%p,): 0x%02x 0x%02x 0x%02x\n",
+	       mtd , ecc_code[0], ecc_code[1], ecc_code[2]);
 
 	return 0;
 }
@@ -123,24 +109,26 @@ int board_nand_init(struct nand_chip *nand)
 {
 	u_int32_t cfg;
 	u_int8_t tacls, twrph0, twrph1;
-	S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
+	struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
+	struct s3c2410_nand *nand_reg = s3c2410_get_base_nand();
 
-	DEBUGN("board_nand_init()\n");
+	debugX(1, "board_nand_init()\n");
 
-	clk_power->CLKCON |= (1 << 4);
+	writel(readl(&clk_power->CLKCON) | (1 << 4), &clk_power->CLKCON);
 
 	/* initialize hardware */
-	twrph0 = 3; twrph1 = 0; tacls = 0;
+	twrph0 = 3;
+	twrph1 = 0;
+	tacls = 0;
 
 	cfg = S3C2410_NFCONF_EN;
 	cfg |= S3C2410_NFCONF_TACLS(tacls - 1);
 	cfg |= S3C2410_NFCONF_TWRPH0(twrph0 - 1);
 	cfg |= S3C2410_NFCONF_TWRPH1(twrph1 - 1);
-
-	NFCONF = cfg;
+	writel(cfg, &nand_reg->NFCONF);
 
 	/* initialize nand_chip data structure */
-	nand->IO_ADDR_R = nand->IO_ADDR_W = (void *)0x4e00000c;
+	nand->IO_ADDR_R = nand->IO_ADDR_W = (void *)&nand_reg->NFDATA;
 
 	/* read_buf and write_buf are default */
 	/* read_byte and write_byte are default */
@@ -165,7 +153,7 @@ int board_nand_init(struct nand_chip *nand)
 	nand->options = 0;
 #endif
 
-	DEBUGN("end of nand_init\n");
+	debugX(1, "end of nand_init\n");
 
 	return 0;
 }
diff --git a/drivers/mtd/onenand/Makefile b/drivers/mtd/onenand/Makefile
index 1d35a57d84..2571df0163 100644
--- a/drivers/mtd/onenand/Makefile
+++ b/drivers/mtd/onenand/Makefile
@@ -26,6 +26,7 @@ include $(TOPDIR)/config.mk
 LIB	:= $(obj)libonenand.a
 
 COBJS-$(CONFIG_CMD_ONENAND)	:= onenand_uboot.o onenand_base.o onenand_bbt.o
+COBJS-$(CONFIG_SAMSUNG_ONENAND)	+= samsung.o
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
diff --git a/drivers/mtd/onenand/samsung.c b/drivers/mtd/onenand/samsung.c
new file mode 100644
index 0000000000..f2be687639
--- /dev/null
+++ b/drivers/mtd/onenand/samsung.c
@@ -0,0 +1,636 @@
+/*
+ * S3C64XX/S5PC100 OneNAND driver at U-Boot
+ *
+ * Copyright (C) 2008-2009 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * Implementation:
+ *	Emulate the pseudo BufferRAM
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <linux/mtd/compat.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/onenand.h>
+#include <linux/mtd/samsung_onenand.h>
+
+#include <asm/io.h>
+#include <asm/errno.h>
+
+#ifdef ONENAND_DEBUG
+#define DPRINTK(format, args...)					\
+do {									\
+	printf("%s[%d]: " format "\n", __func__, __LINE__, ##args);	\
+} while (0)
+#else
+#define DPRINTK(...)			do { } while (0)
+#endif
+
+#define ONENAND_ERASE_STATUS		0x00
+#define ONENAND_MULTI_ERASE_SET		0x01
+#define ONENAND_ERASE_START		0x03
+#define ONENAND_UNLOCK_START		0x08
+#define ONENAND_UNLOCK_END		0x09
+#define ONENAND_LOCK_START		0x0A
+#define ONENAND_LOCK_END		0x0B
+#define ONENAND_LOCK_TIGHT_START	0x0C
+#define ONENAND_LOCK_TIGHT_END		0x0D
+#define ONENAND_UNLOCK_ALL		0x0E
+#define ONENAND_OTP_ACCESS		0x12
+#define ONENAND_SPARE_ACCESS_ONLY	0x13
+#define ONENAND_MAIN_ACCESS_ONLY	0x14
+#define ONENAND_ERASE_VERIFY		0x15
+#define ONENAND_MAIN_SPARE_ACCESS	0x16
+#define ONENAND_PIPELINE_READ		0x4000
+
+#if defined(CONFIG_S3C64XX)
+#define MAP_00				(0x0 << 24)
+#define MAP_01				(0x1 << 24)
+#define MAP_10				(0x2 << 24)
+#define MAP_11				(0x3 << 24)
+#elif defined(CONFIG_S5PC1XX)
+#define MAP_00				(0x0 << 26)
+#define MAP_01				(0x1 << 26)
+#define MAP_10				(0x2 << 26)
+#define MAP_11				(0x3 << 26)
+#endif
+
+/* read/write of XIP buffer */
+#define CMD_MAP_00(mem_addr)		(MAP_00 | ((mem_addr) << 1))
+/* read/write to the memory device */
+#define CMD_MAP_01(mem_addr)		(MAP_01 | (mem_addr))
+/* control special functions of the memory device */
+#define CMD_MAP_10(mem_addr)		(MAP_10 | (mem_addr))
+/* direct interface(direct access) with the memory device */
+#define CMD_MAP_11(mem_addr)		(MAP_11 | ((mem_addr) << 2))
+
+struct s3c_onenand {
+	struct mtd_info	*mtd;
+	void __iomem	*base;
+	void __iomem	*ahb_addr;
+	int		bootram_command;
+	void __iomem	*page_buf;
+	void __iomem	*oob_buf;
+	unsigned int	(*mem_addr)(int fba, int fpa, int fsa);
+	struct samsung_onenand *reg;
+};
+
+static struct s3c_onenand *onenand;
+
+static int s3c_read_cmd(unsigned int cmd)
+{
+	return readl(onenand->ahb_addr + cmd);
+}
+
+static void s3c_write_cmd(int value, unsigned int cmd)
+{
+	writel(value, onenand->ahb_addr + cmd);
+}
+
+/*
+ * MEM_ADDR
+ *
+ * fba: flash block address
+ * fpa: flash page address
+ * fsa: flash sector address
+ *
+ * return the buffer address on the memory device
+ * It will be combined with CMD_MAP_XX
+ */
+#if defined(CONFIG_S3C64XX)
+static unsigned int s3c_mem_addr(int fba, int fpa, int fsa)
+{
+	return (fba << 12) | (fpa << 6) | (fsa << 4);
+}
+#elif defined(CONFIG_S5PC1XX)
+static unsigned int s3c_mem_addr(int fba, int fpa, int fsa)
+{
+	return (fba << 13) | (fpa << 7) | (fsa << 5);
+}
+#endif
+
+static void s3c_onenand_reset(void)
+{
+	unsigned long timeout = 0x10000;
+	int stat;
+
+	writel(ONENAND_MEM_RESET_COLD, &onenand->reg->mem_reset);
+	while (timeout--) {
+		stat = readl(&onenand->reg->int_err_stat);
+		if (stat & RST_CMP)
+			break;
+	}
+	stat = readl(&onenand->reg->int_err_stat);
+	writel(stat, &onenand->reg->int_err_ack);
+
+	/* Clear interrupt */
+	writel(0x0, &onenand->reg->int_err_ack);
+	/* Clear the ECC status */
+	writel(0x0, &onenand->reg->ecc_err_stat);
+}
+
+static unsigned short s3c_onenand_readw(void __iomem *addr)
+{
+	struct onenand_chip *this = onenand->mtd->priv;
+	int reg = addr - this->base;
+	int word_addr = reg >> 1;
+	int value;
+
+	/* It's used for probing time */
+	switch (reg) {
+	case ONENAND_REG_MANUFACTURER_ID:
+		return readl(&onenand->reg->manufact_id);
+	case ONENAND_REG_DEVICE_ID:
+		return readl(&onenand->reg->device_id);
+	case ONENAND_REG_VERSION_ID:
+		return readl(&onenand->reg->flash_ver_id);
+	case ONENAND_REG_DATA_BUFFER_SIZE:
+		return readl(&onenand->reg->data_buf_size);
+	case ONENAND_REG_TECHNOLOGY:
+		return readl(&onenand->reg->tech);
+	case ONENAND_REG_SYS_CFG1:
+		return readl(&onenand->reg->mem_cfg);
+
+	/* Used at unlock all status */
+	case ONENAND_REG_CTRL_STATUS:
+		return 0;
+
+	case ONENAND_REG_WP_STATUS:
+		return ONENAND_WP_US;
+
+	default:
+		break;
+	}
+
+	/* BootRAM access control */
+	if (reg < ONENAND_DATARAM && onenand->bootram_command) {
+		if (word_addr == 0)
+			return readl(&onenand->reg->manufact_id);
+		if (word_addr == 1)
+			return readl(&onenand->reg->device_id);
+		if (word_addr == 2)
+			return readl(&onenand->reg->flash_ver_id);
+	}
+
+	value = s3c_read_cmd(CMD_MAP_11(word_addr)) & 0xffff;
+	printk(KERN_INFO "s3c_onenand_readw:  Illegal access"
+		" at reg 0x%x, value 0x%x\n", word_addr, value);
+	return value;
+}
+
+static void s3c_onenand_writew(unsigned short value, void __iomem *addr)
+{
+	struct onenand_chip *this = onenand->mtd->priv;
+	int reg = addr - this->base;
+	int word_addr = reg >> 1;
+
+	/* It's used for probing time */
+	switch (reg) {
+	case ONENAND_REG_SYS_CFG1:
+		writel(value, &onenand->reg->mem_cfg);
+		return;
+
+	case ONENAND_REG_START_ADDRESS1:
+	case ONENAND_REG_START_ADDRESS2:
+		return;
+
+	/* Lock/lock-tight/unlock/unlock_all */
+	case ONENAND_REG_START_BLOCK_ADDRESS:
+		return;
+
+	default:
+		break;
+	}
+
+	/* BootRAM access control */
+	if (reg < ONENAND_DATARAM) {
+		if (value == ONENAND_CMD_READID) {
+			onenand->bootram_command = 1;
+			return;
+		}
+		if (value == ONENAND_CMD_RESET) {
+			writel(ONENAND_MEM_RESET_COLD,
+					&onenand->reg->mem_reset);
+			onenand->bootram_command = 0;
+			return;
+		}
+	}
+
+	printk(KERN_INFO "s3c_onenand_writew: Illegal access"
+		" at reg 0x%x, value 0x%x\n", word_addr, value);
+
+	s3c_write_cmd(value, CMD_MAP_11(word_addr));
+}
+
+static int s3c_onenand_wait(struct mtd_info *mtd, int state)
+{
+	unsigned int flags = INT_ACT;
+	unsigned int stat, ecc;
+	unsigned long timeout = 0x100000;
+
+	switch (state) {
+	case FL_READING:
+		flags |= BLK_RW_CMP | LOAD_CMP;
+		break;
+	case FL_WRITING:
+		flags |= BLK_RW_CMP | PGM_CMP;
+		break;
+	case FL_ERASING:
+		flags |= BLK_RW_CMP | ERS_CMP;
+		break;
+	case FL_LOCKING:
+		flags |= BLK_RW_CMP;
+		break;
+	default:
+		break;
+	}
+
+	while (timeout--) {
+		stat = readl(&onenand->reg->int_err_stat);
+		if (stat & flags)
+			break;
+	}
+
+	/* To get correct interrupt status in timeout case */
+	stat = readl(&onenand->reg->int_err_stat);
+	writel(stat, &onenand->reg->int_err_ack);
+
+	/*
+	 * In the Spec. it checks the controller status first
+	 * However if you get the correct information in case of
+	 * power off recovery (POR) test, it should read ECC status first
+	 */
+	if (stat & LOAD_CMP) {
+		ecc = readl(&onenand->reg->ecc_err_stat);
+		if (ecc & ONENAND_ECC_4BIT_UNCORRECTABLE) {
+			printk(KERN_INFO "%s: ECC error = 0x%04x\n",
+					__func__, ecc);
+			mtd->ecc_stats.failed++;
+			return -EBADMSG;
+		}
+	}
+
+	if (stat & (LOCKED_BLK | ERS_FAIL | PGM_FAIL | LD_FAIL_ECC_ERR)) {
+		printk(KERN_INFO "%s: controller error = 0x%04x\n",
+				__func__, stat);
+		if (stat & LOCKED_BLK)
+			printk(KERN_INFO "%s: it's locked error = 0x%04x\n",
+					__func__, stat);
+
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int s3c_onenand_command(struct mtd_info *mtd, int cmd,
+		loff_t addr, size_t len)
+{
+	struct onenand_chip *this = mtd->priv;
+	unsigned int *m, *s;
+	int fba, fpa, fsa = 0;
+	unsigned int mem_addr;
+	int i, mcount, scount;
+	int index;
+
+	fba = (int) (addr >> this->erase_shift);
+	fpa = (int) (addr >> this->page_shift);
+	fpa &= this->page_mask;
+
+	mem_addr = onenand->mem_addr(fba, fpa, fsa);
+
+	switch (cmd) {
+	case ONENAND_CMD_READ:
+	case ONENAND_CMD_READOOB:
+	case ONENAND_CMD_BUFFERRAM:
+		ONENAND_SET_NEXT_BUFFERRAM(this);
+	default:
+		break;
+	}
+
+	index = ONENAND_CURRENT_BUFFERRAM(this);
+
+	/*
+	 * Emulate Two BufferRAMs and access with 4 bytes pointer
+	 */
+	m = (unsigned int *) onenand->page_buf;
+	s = (unsigned int *) onenand->oob_buf;
+
+	if (index) {
+		m += (this->writesize >> 2);
+		s += (mtd->oobsize >> 2);
+	}
+
+	mcount = mtd->writesize >> 2;
+	scount = mtd->oobsize >> 2;
+
+	switch (cmd) {
+	case ONENAND_CMD_READ:
+		/* Main */
+		for (i = 0; i < mcount; i++)
+			*m++ = s3c_read_cmd(CMD_MAP_01(mem_addr));
+		return 0;
+
+	case ONENAND_CMD_READOOB:
+		writel(TSRF, &onenand->reg->trans_spare);
+		/* Main */
+		for (i = 0; i < mcount; i++)
+			*m++ = s3c_read_cmd(CMD_MAP_01(mem_addr));
+
+		/* Spare */
+		for (i = 0; i < scount; i++)
+			*s++ = s3c_read_cmd(CMD_MAP_01(mem_addr));
+
+		writel(0, &onenand->reg->trans_spare);
+		return 0;
+
+	case ONENAND_CMD_PROG:
+		/* Main */
+		for (i = 0; i < mcount; i++)
+			s3c_write_cmd(*m++, CMD_MAP_01(mem_addr));
+		return 0;
+
+	case ONENAND_CMD_PROGOOB:
+		writel(TSRF, &onenand->reg->trans_spare);
+
+		/* Main - dummy write */
+		for (i = 0; i < mcount; i++)
+			s3c_write_cmd(0xffffffff, CMD_MAP_01(mem_addr));
+
+		/* Spare */
+		for (i = 0; i < scount; i++)
+			s3c_write_cmd(*s++, CMD_MAP_01(mem_addr));
+
+		writel(0, &onenand->reg->trans_spare);
+		return 0;
+
+	case ONENAND_CMD_UNLOCK_ALL:
+		s3c_write_cmd(ONENAND_UNLOCK_ALL, CMD_MAP_10(mem_addr));
+		return 0;
+
+	case ONENAND_CMD_ERASE:
+		s3c_write_cmd(ONENAND_ERASE_START, CMD_MAP_10(mem_addr));
+		return 0;
+
+	case ONENAND_CMD_MULTIBLOCK_ERASE:
+		s3c_write_cmd(ONENAND_MULTI_ERASE_SET, CMD_MAP_10(mem_addr));
+		return 0;
+
+	case ONENAND_CMD_ERASE_VERIFY:
+		s3c_write_cmd(ONENAND_ERASE_VERIFY, CMD_MAP_10(mem_addr));
+		return 0;
+
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static unsigned char *s3c_get_bufferram(struct mtd_info *mtd, int area)
+{
+	struct onenand_chip *this = mtd->priv;
+	int index = ONENAND_CURRENT_BUFFERRAM(this);
+	unsigned char *p;
+
+	if (area == ONENAND_DATARAM) {
+		p = (unsigned char *) onenand->page_buf;
+		if (index == 1)
+			p += this->writesize;
+	} else {
+		p = (unsigned char *) onenand->oob_buf;
+		if (index == 1)
+			p += mtd->oobsize;
+	}
+
+	return p;
+}
+
+static int onenand_read_bufferram(struct mtd_info *mtd, loff_t addr, int area,
+				  unsigned char *buffer, int offset,
+				  size_t count)
+{
+	unsigned char *p;
+
+	p = s3c_get_bufferram(mtd, area);
+	memcpy(buffer, p + offset, count);
+	return 0;
+}
+
+static int onenand_write_bufferram(struct mtd_info *mtd, loff_t addr, int area,
+				   const unsigned char *buffer, int offset,
+				   size_t count)
+{
+	unsigned char *p;
+
+	p = s3c_get_bufferram(mtd, area);
+	memcpy(p + offset, buffer, count);
+	return 0;
+}
+
+static int s3c_onenand_bbt_wait(struct mtd_info *mtd, int state)
+{
+	struct samsung_onenand *reg = (struct samsung_onenand *)onenand->base;
+	unsigned int flags = INT_ACT | LOAD_CMP;
+	unsigned int stat;
+	unsigned long timeout = 0x10000;
+
+	while (timeout--) {
+		stat = readl(&reg->int_err_stat);
+		if (stat & flags)
+			break;
+	}
+	/* To get correct interrupt status in timeout case */
+	stat = readl(&onenand->reg->int_err_stat);
+	writel(stat, &onenand->reg->int_err_ack);
+
+	if (stat & LD_FAIL_ECC_ERR) {
+		s3c_onenand_reset();
+		return ONENAND_BBT_READ_ERROR;
+	}
+
+	if (stat & LOAD_CMP) {
+		int ecc = readl(&onenand->reg->ecc_err_stat);
+		if (ecc & ONENAND_ECC_4BIT_UNCORRECTABLE) {
+			s3c_onenand_reset();
+			return ONENAND_BBT_READ_ERROR;
+		}
+	}
+
+	return 0;
+}
+
+static void s3c_onenand_check_lock_status(struct mtd_info *mtd)
+{
+	struct onenand_chip *this = mtd->priv;
+	unsigned int block, end;
+	int tmp;
+
+	end = this->chipsize >> this->erase_shift;
+
+	for (block = 0; block < end; block++) {
+		tmp = s3c_read_cmd(CMD_MAP_01(onenand->mem_addr(block, 0, 0)));
+
+		if (readl(&onenand->reg->int_err_stat) & LOCKED_BLK) {
+			printf("block %d is write-protected!\n", block);
+			writel(LOCKED_BLK, &onenand->reg->int_err_ack);
+		}
+	}
+}
+
+static void s3c_onenand_do_lock_cmd(struct mtd_info *mtd, loff_t ofs,
+		size_t len, int cmd)
+{
+	struct onenand_chip *this = mtd->priv;
+	int start, end, start_mem_addr, end_mem_addr;
+
+	start = ofs >> this->erase_shift;
+	start_mem_addr = onenand->mem_addr(start, 0, 0);
+	end = start + (len >> this->erase_shift) - 1;
+	end_mem_addr = onenand->mem_addr(end, 0, 0);
+
+	if (cmd == ONENAND_CMD_LOCK) {
+		s3c_write_cmd(ONENAND_LOCK_START, CMD_MAP_10(start_mem_addr));
+		s3c_write_cmd(ONENAND_LOCK_END, CMD_MAP_10(end_mem_addr));
+	} else {
+		s3c_write_cmd(ONENAND_UNLOCK_START, CMD_MAP_10(start_mem_addr));
+		s3c_write_cmd(ONENAND_UNLOCK_END, CMD_MAP_10(end_mem_addr));
+	}
+
+	this->wait(mtd, FL_LOCKING);
+}
+
+static void s3c_onenand_unlock_all(struct mtd_info *mtd)
+{
+	struct onenand_chip *this = mtd->priv;
+	loff_t ofs = 0;
+	size_t len = this->chipsize;
+
+	/* FIXME workaround */
+	this->subpagesize = mtd->writesize;
+	mtd->subpage_sft = 0;
+
+	if (this->options & ONENAND_HAS_UNLOCK_ALL) {
+		/* Write unlock command */
+		this->command(mtd, ONENAND_CMD_UNLOCK_ALL, 0, 0);
+
+		/* No need to check return value */
+		this->wait(mtd, FL_LOCKING);
+
+		/* Workaround for all block unlock in DDP */
+		if (!ONENAND_IS_DDP(this)) {
+			s3c_onenand_check_lock_status(mtd);
+			return;
+		}
+
+		/* All blocks on another chip */
+		ofs = this->chipsize >> 1;
+		len = this->chipsize >> 1;
+	}
+
+	s3c_onenand_do_lock_cmd(mtd, ofs, len, ONENAND_CMD_UNLOCK);
+	s3c_onenand_check_lock_status(mtd);
+}
+
+#ifdef CONFIG_S3C64XX
+static void s3c_set_width_regs(struct onenand_chip *this)
+{
+	int dev_id, density;
+	int fba, fpa, fsa;
+	int dbs_dfs;
+
+	dev_id = DEVICE_ID0_REG;
+
+	density = (dev_id >> ONENAND_DEVICE_DENSITY_SHIFT) & 0xf;
+	dbs_dfs = !!(dev_id & ONENAND_DEVICE_IS_DDP);
+
+	fba = density + 7;
+	if (dbs_dfs)
+		fba--;		/* Decrease the fba */
+	fpa = 6;
+	if (density >= ONENAND_DEVICE_DENSITY_512Mb)
+		fsa = 2;
+	else
+		fsa = 1;
+
+	DPRINTK("FBA %lu, FPA %lu, FSA %lu, DDP %lu",
+		FBA_WIDTH0_REG, FPA_WIDTH0_REG, FSA_WIDTH0_REG,
+		DDP_DEVICE_REG);
+
+	DPRINTK("mem_cfg0 0x%lx, sync mode %lu, "
+		"dev_page_size %lu, BURST LEN %lu",
+		MEM_CFG0_REG, SYNC_MODE_REG,
+		DEV_PAGE_SIZE_REG, BURST_LEN0_REG);
+
+	DEV_PAGE_SIZE_REG = 0x1;
+
+	FBA_WIDTH0_REG = fba;
+	FPA_WIDTH0_REG = fpa;
+	FSA_WIDTH0_REG = fsa;
+	DBS_DFS_WIDTH0_REG = dbs_dfs;
+}
+#endif
+
+void s3c_onenand_init(struct mtd_info *mtd)
+{
+	struct onenand_chip *this = mtd->priv;
+	u32 size = (4 << 10);	/* 4 KiB */
+
+	onenand = malloc(sizeof(struct s3c_onenand));
+	if (!onenand)
+		return;
+
+	onenand->page_buf = malloc(size * sizeof(char));
+	if (!onenand->page_buf)
+		return;
+	memset(onenand->page_buf, 0xff, size);
+
+	onenand->oob_buf = malloc(128 * sizeof(char));
+	if (!onenand->oob_buf)
+		return;
+	memset(onenand->oob_buf, 0xff, 128);
+
+	onenand->mtd = mtd;
+
+#if defined(CONFIG_S3C64XX)
+	onenand->base = (void *)0x70100000;
+	onenand->ahb_addr = (void *)0x20000000;
+#elif defined(CONFIG_S5PC1XX)
+	onenand->base = (void *)0xE7100000;
+	onenand->ahb_addr = (void *)0xB0000000;
+#endif
+	onenand->mem_addr = s3c_mem_addr;
+	onenand->reg = (struct samsung_onenand *)onenand->base;
+
+	this->read_word = s3c_onenand_readw;
+	this->write_word = s3c_onenand_writew;
+
+	this->wait = s3c_onenand_wait;
+	this->bbt_wait = s3c_onenand_bbt_wait;
+	this->unlock_all = s3c_onenand_unlock_all;
+	this->command = s3c_onenand_command;
+
+	this->read_bufferram = onenand_read_bufferram;
+	this->write_bufferram = onenand_write_bufferram;
+
+	this->options |= ONENAND_RUNTIME_BADBLOCK_CHECK;
+}
diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
index b106ec9732..df7347897b 100644
--- a/drivers/net/smc911x.c
+++ b/drivers/net/smc911x.c
@@ -249,6 +249,12 @@ int smc911x_initialize(u8 dev_num, int base_addr)
 
 	dev->iobase = base_addr;
 
+	/* Try to detect chip. Will fail if not present. */
+	if (smc911x_detect_chip(dev)) {
+		free(dev);
+		return 0;
+	}
+
 	addrh = smc911x_get_mac_csr(dev, ADDRH);
 	addrl = smc911x_get_mac_csr(dev, ADDRL);
 	dev->enetaddr[0] = addrl;
@@ -264,12 +270,6 @@ int smc911x_initialize(u8 dev_num, int base_addr)
 	dev->recv = smc911x_rx;
 	sprintf(dev->name, "%s-%hu", DRIVERNAME, dev_num);
 
-	/* Try to detect chip. Will fail if not present. */
-	if (smc911x_detect_chip(dev)) {
-		free(dev);
-		return 0;
-	}
-
 	eth_register(dev);
 	return 0;
 }
diff --git a/drivers/rtc/s3c24x0_rtc.c b/drivers/rtc/s3c24x0_rtc.c
index e10db9acb8..1ce34e38df 100644
--- a/drivers/rtc/s3c24x0_rtc.c
+++ b/drivers/rtc/s3c24x0_rtc.c
@@ -37,6 +37,7 @@
 #endif
 
 #include <rtc.h>
+#include <asm/io.h>
 
 /*#define	DEBUG*/
 
@@ -48,112 +49,113 @@ typedef enum {
 
 static inline void SetRTC_Access(RTC_ACCESS a)
 {
-	S3C24X0_RTC * const rtc = S3C24X0_GetBase_RTC();
+	struct s3c24x0_rtc *rtc = s3c24x0_get_base_rtc();
+
 	switch (a) {
-		case RTC_ENABLE:
-			rtc->RTCCON |= 0x01; break;
+	case RTC_ENABLE:
+		writeb(readb(&rtc->RTCCON) | 0x01, &rtc->RTCCON);
+		break;
 
-		case RTC_DISABLE:
-			rtc->RTCCON &= ~0x01; break;
+	case RTC_DISABLE:
+		writeb(readb(&rtc->RTCCON) & ~0x01, &rtc->RTCCON);
+		break;
 	}
 }
 
 /* ------------------------------------------------------------------------- */
 
-int rtc_get (struct rtc_time *tmp)
+int rtc_get(struct rtc_time *tmp)
 {
-	S3C24X0_RTC * const rtc = S3C24X0_GetBase_RTC();
+	struct s3c24x0_rtc *rtc = s3c24x0_get_base_rtc();
 	uchar sec, min, hour, mday, wday, mon, year;
-	uchar a_sec,a_min, a_hour, a_date, a_mon, a_year, a_armed;
+	uchar a_sec, a_min, a_hour, a_date, a_mon, a_year, a_armed;
 
 	/* enable access to RTC registers */
 	SetRTC_Access(RTC_ENABLE);
 
 	/* read RTC registers */
 	do {
-		sec	= rtc->BCDSEC;
-		min	= rtc->BCDMIN;
-		hour	= rtc->BCDHOUR;
-		mday	= rtc->BCDDATE;
-		wday	= rtc->BCDDAY;
-		mon	= rtc->BCDMON;
-		year	= rtc->BCDYEAR;
-	} while (sec != rtc->BCDSEC);
+		sec  = readb(&rtc->BCDSEC);
+		min  = readb(&rtc->BCDMIN);
+		hour = readb(&rtc->BCDHOUR);
+		mday = readb(&rtc->BCDDATE);
+		wday = readb(&rtc->BCDDAY);
+		mon  = readb(&rtc->BCDMON);
+		year = readb(&rtc->BCDYEAR);
+	} while (sec != readb(&rtc->BCDSEC));
 
 	/* read ALARM registers */
-	a_sec	= rtc->ALMSEC;
-	a_min	= rtc->ALMMIN;
-	a_hour	= rtc->ALMHOUR;
-	a_date	= rtc->ALMDATE;
-	a_mon	= rtc->ALMMON;
-	a_year	= rtc->ALMYEAR;
-	a_armed	= rtc->RTCALM;
+	a_sec   = readb(&rtc->ALMSEC);
+	a_min   = readb(&rtc->ALMMIN);
+	a_hour  = readb(&rtc->ALMHOUR);
+	a_date  = readb(&rtc->ALMDATE);
+	a_mon   = readb(&rtc->ALMMON);
+	a_year  = readb(&rtc->ALMYEAR);
+	a_armed = readb(&rtc->RTCALM);
 
 	/* disable access to RTC registers */
 	SetRTC_Access(RTC_DISABLE);
 
 #ifdef RTC_DEBUG
-	printf ( "Get RTC year: %02x mon/cent: %02x mday: %02x wday: %02x "
-		"hr: %02x min: %02x sec: %02x\n",
-		year, mon, mday, wday,
-		hour, min, sec);
-	printf ( "Alarms: %02x: year: %02x month: %02x date: %02x hour: %02x min: %02x sec: %02x\n",
-		a_armed,
-		a_year, a_mon, a_date,
-		a_hour, a_min, a_sec);
+	printf("Get RTC year: %02x mon/cent: %02x mday: %02x wday: %02x "
+	       "hr: %02x min: %02x sec: %02x\n",
+	       year, mon, mday, wday, hour, min, sec);
+	printf("Alarms: %02x: year: %02x month: %02x date: %02x hour: "
+	       "%02x min: %02x sec: %02x\n",
+	       a_armed, a_year, a_mon, a_date, a_hour, a_min, a_sec);
 #endif
 
-	tmp->tm_sec  = bcd2bin(sec  & 0x7F);
-	tmp->tm_min  = bcd2bin(min  & 0x7F);
+	tmp->tm_sec  = bcd2bin(sec & 0x7F);
+	tmp->tm_min  = bcd2bin(min & 0x7F);
 	tmp->tm_hour = bcd2bin(hour & 0x3F);
 	tmp->tm_mday = bcd2bin(mday & 0x3F);
 	tmp->tm_mon  = bcd2bin(mon & 0x1F);
 	tmp->tm_year = bcd2bin(year);
 	tmp->tm_wday = bcd2bin(wday & 0x07);
-	if(tmp->tm_year<70)
-		tmp->tm_year+=2000;
+	if (tmp->tm_year < 70)
+		tmp->tm_year += 2000;
 	else
-		tmp->tm_year+=1900;
-	tmp->tm_yday = 0;
-	tmp->tm_isdst= 0;
+		tmp->tm_year += 1900;
+	tmp->tm_yday  = 0;
+	tmp->tm_isdst = 0;
 #ifdef RTC_DEBUG
-	printf ( "Get DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
-		tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
-		tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+	printf("Get DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
+	       tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
+	       tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
 #endif
 
 	return 0;
 }
 
-int rtc_set (struct rtc_time *tmp)
+int rtc_set(struct rtc_time *tmp)
 {
-	S3C24X0_RTC * const rtc = S3C24X0_GetBase_RTC();
+	struct s3c24x0_rtc *rtc = s3c24x0_get_base_rtc();
 	uchar sec, min, hour, mday, wday, mon, year;
 
 #ifdef RTC_DEBUG
-	printf ( "Set DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
-		tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
-		tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+	printf("Set DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
+	       tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
+	       tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
 #endif
-	year	= bin2bcd(tmp->tm_year % 100);
-	mon	= bin2bcd(tmp->tm_mon);
-	wday	= bin2bcd(tmp->tm_wday);
-	mday	= bin2bcd(tmp->tm_mday);
-	hour	= bin2bcd(tmp->tm_hour);
-	min	= bin2bcd(tmp->tm_min);
-	sec	= bin2bcd(tmp->tm_sec);
+	year = bin2bcd(tmp->tm_year % 100);
+	mon  = bin2bcd(tmp->tm_mon);
+	wday = bin2bcd(tmp->tm_wday);
+	mday = bin2bcd(tmp->tm_mday);
+	hour = bin2bcd(tmp->tm_hour);
+	min  = bin2bcd(tmp->tm_min);
+	sec  = bin2bcd(tmp->tm_sec);
 
 	/* enable access to RTC registers */
 	SetRTC_Access(RTC_ENABLE);
 
 	/* write RTC registers */
-	rtc->BCDSEC	= sec;
-	rtc->BCDMIN	= min;
-	rtc->BCDHOUR	= hour;
-	rtc->BCDDATE	= mday;
-	rtc->BCDDAY	= wday;
-	rtc->BCDMON	= mon;
-	rtc->BCDYEAR	= year;
+	writeb(sec, &rtc->BCDSEC);
+	writeb(min, &rtc->BCDMIN);
+	writeb(hour, &rtc->BCDHOUR);
+	writeb(mday, &rtc->BCDDATE);
+	writeb(wday, &rtc->BCDDAY);
+	writeb(mon, &rtc->BCDMON);
+	writeb(year, &rtc->BCDYEAR);
 
 	/* disable access to RTC registers */
 	SetRTC_Access(RTC_DISABLE);
@@ -161,12 +163,12 @@ int rtc_set (struct rtc_time *tmp)
 	return 0;
 }
 
-void rtc_reset (void)
+void rtc_reset(void)
 {
-	S3C24X0_RTC * const rtc = S3C24X0_GetBase_RTC();
+	struct s3c24x0_rtc *rtc = s3c24x0_get_base_rtc();
 
-	rtc->RTCCON = (rtc->RTCCON & ~0x06) | 0x08;
-	rtc->RTCCON &= ~(0x08|0x01);
+	writeb((readb(&rtc->RTCCON) & ~0x06) | 0x08, &rtc->RTCCON);
+	writeb(readb(&rtc->RTCCON) & ~(0x08 | 0x01), &rtc->RTCCON);
 }
 
 #endif
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 64882a2e8e..3c77a7c6c0 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -33,6 +33,7 @@ COBJS-$(CONFIG_NS9750_UART) += ns9750_serial.o
 COBJS-$(CONFIG_SYS_NS16550) += ns16550.o
 COBJS-$(CONFIG_DRIVER_S3C4510_UART) += s3c4510b_uart.o
 COBJS-$(CONFIG_S3C64XX) += s3c64xx.o
+COBJS-$(CONFIG_S5PC1XX) += serial_s5pc1xx.o
 COBJS-$(CONFIG_SYS_NS16550_SERIAL) += serial.o
 COBJS-$(CONFIG_CLPS7111_SERIAL) += serial_clps7111.o
 COBJS-$(CONFIG_IMX_SERIAL) += serial_imx.o
diff --git a/drivers/serial/serial_s3c24x0.c b/drivers/serial/serial_s3c24x0.c
index 6d69c43ed5..c2c72e456f 100644
--- a/drivers/serial/serial_s3c24x0.c
+++ b/drivers/serial/serial_s3c24x0.c
@@ -38,7 +38,7 @@ DECLARE_GLOBAL_DATA_PTR;
 
 #elif defined(CONFIG_SERIAL3)
 # if defined(CONFIG_TRAB)
-#  #error "TRAB supports only CONFIG_SERIAL1"
+#  error "TRAB supports only CONFIG_SERIAL1"
 # endif
 #define UART_NR	S3C24X0_UART2
 
@@ -46,51 +46,71 @@ DECLARE_GLOBAL_DATA_PTR;
 #error "Bad: you didn't configure serial ..."
 #endif
 
+#include <asm/io.h>
+
 #if defined(CONFIG_SERIAL_MULTI)
 #include <serial.h>
 
 /* Multi serial device functions */
 #define DECLARE_S3C_SERIAL_FUNCTIONS(port) \
-    int  s3serial##port##_init (void) {\
-	return serial_init_dev(port);}\
-    void s3serial##port##_setbrg (void) {\
-	serial_setbrg_dev(port);}\
-    int  s3serial##port##_getc (void) {\
-	return serial_getc_dev(port);}\
-    int  s3serial##port##_tstc (void) {\
-	return serial_tstc_dev(port);}\
-    void s3serial##port##_putc (const char c) {\
-	serial_putc_dev(port, c);}\
-    void s3serial##port##_puts (const char *s) {\
-	serial_puts_dev(port, s);}
-
-#define INIT_S3C_SERIAL_STRUCTURE(port,name,bus) {\
-	name,\
-	bus,\
-	s3serial##port##_init,\
-	s3serial##port##_setbrg,\
-	s3serial##port##_getc,\
-	s3serial##port##_tstc,\
-	s3serial##port##_putc,\
-	s3serial##port##_puts, }
+	int s3serial##port##_init(void) \
+	{ \
+		return serial_init_dev(port); \
+	} \
+	void s3serial##port##_setbrg(void) \
+	{ \
+		serial_setbrg_dev(port); \
+	} \
+	int s3serial##port##_getc(void) \
+	{ \
+		return serial_getc_dev(port); \
+	} \
+	int s3serial##port##_tstc(void) \
+	{ \
+		return serial_tstc_dev(port); \
+	} \
+	void s3serial##port##_putc(const char c) \
+	{ \
+		serial_putc_dev(port, c); \
+	} \
+	void s3serial##port##_puts(const char *s) \
+	{ \
+		serial_puts_dev(port, s); \
+	}
+
+#define INIT_S3C_SERIAL_STRUCTURE(port, name, bus) { \
+	name, \
+	bus, \
+	s3serial##port##_init, \
+	s3serial##port##_setbrg, \
+	s3serial##port##_getc, \
+	s3serial##port##_tstc, \
+	s3serial##port##_putc, \
+	s3serial##port##_puts, \
+}
 
 #endif /* CONFIG_SERIAL_MULTI */
 
+#ifdef CONFIG_HWFLOW
+static int hwflow;
+#endif
+
 void _serial_setbrg(const int dev_index)
 {
-	S3C24X0_UART * const uart = S3C24X0_GetBase_UART(dev_index);
+	struct s3c24x0_uart *uart = s3c24x0_get_base_uart(dev_index);
 	unsigned int reg = 0;
 	int i;
 
 	/* value is calculated so : (int)(PCLK/16./baudrate) -1 */
 	reg = get_PCLK() / (16 * gd->baudrate) - 1;
 
-	uart->UBRDIV = reg;
-	for (i = 0; i < 100; i++);
+	writel(reg, &uart->UBRDIV);
+	for (i = 0; i < 100; i++)
+		/* Delay */ ;
 }
+
 #if defined(CONFIG_SERIAL_MULTI)
-static inline void
-serial_setbrg_dev(unsigned int dev_index)
+static inline void serial_setbrg_dev(unsigned int dev_index)
 {
 	_serial_setbrg(dev_index);
 }
@@ -107,29 +127,33 @@ void serial_setbrg(void)
  */
 static int serial_init_dev(const int dev_index)
 {
-	S3C24X0_UART * const uart = S3C24X0_GetBase_UART(dev_index);
+	struct s3c24x0_uart *uart = s3c24x0_get_base_uart(dev_index);
+
+#ifdef CONFIG_HWFLOW
+	hwflow = 0;	/* turned off by default */
+#endif
 
 	/* FIFO enable, Tx/Rx FIFO clear */
-	uart->UFCON = 0x07;
-	uart->UMCON = 0x0;
+	writel(0x07, &uart->UFCON);
+	writel(0x0, &uart->UMCON);
 
 	/* Normal,No parity,1 stop,8 bit */
-	uart->ULCON = 0x3;
+	writel(0x3, &uart->ULCON);
 	/*
 	 * tx=level,rx=edge,disable timeout int.,enable rx error int.,
 	 * normal,interrupt or polling
 	 */
-	uart->UCON = 0x245;
+	writel(0x245, &uart->UCON);
 
 #ifdef CONFIG_HWFLOW
-	uart->UMCON = 0x1; /* RTS up */
+	writel(0x1, &uart->UMCON);	/* RTS up */
 #endif
 
 	/* FIXME: This is sooooooooooooooooooo ugly */
 #if defined(CONFIG_ARCH_GTA02_v1) || defined(CONFIG_ARCH_GTA02_v2)
 	/* we need auto hw flow control on the gsm and gps port */
 	if (dev_index == 0 || dev_index == 1)
-		uart->UMCON = 0x10;
+		writel(0x10, &uart->UMCON);
 #endif
 	_serial_setbrg(dev_index);
 
@@ -140,7 +164,7 @@ static int serial_init_dev(const int dev_index)
 /* Initialise the serial port. The settings are always 8 data bits, no parity,
  * 1 stop bit, no start bits.
  */
-int serial_init (void)
+int serial_init(void)
 {
 	return serial_init_dev(UART_NR);
 }
@@ -151,40 +175,40 @@ int serial_init (void)
  * otherwise. When the function is succesfull, the character read is
  * written into its argument c.
  */
-int _serial_getc (const int dev_index)
+int _serial_getc(const int dev_index)
 {
-	S3C24X0_UART * const uart = S3C24X0_GetBase_UART(dev_index);
+	struct s3c24x0_uart *uart = s3c24x0_get_base_uart(dev_index);
 
-	/* wait for character to arrive */
-	while (!(uart->UTRSTAT & 0x1));
+	while (!(readl(&uart->UTRSTAT) & 0x1))
+		/* wait for character to arrive */ ;
 
-	return uart->URXH & 0xff;
+	return readb(&uart->URXH) & 0xff;
 }
+
 #if defined(CONFIG_SERIAL_MULTI)
 static inline int serial_getc_dev(unsigned int dev_index)
 {
 	return _serial_getc(dev_index);
 }
 #else
-int serial_getc (void)
+int serial_getc(void)
 {
 	return _serial_getc(UART_NR);
 }
 #endif
 
 #ifdef CONFIG_HWFLOW
-static int hwflow = 0; /* turned off by default */
 int hwflow_onoff(int on)
 {
-	switch(on) {
+	switch (on) {
 	case 0:
 	default:
-		break; /* return current */
+		break;		/* return current */
 	case 1:
-		hwflow = 1; /* turn on */
+		hwflow = 1;	/* turn on */
 		break;
 	case -1:
-		hwflow = 0; /* turn off */
+		hwflow = 0;	/* turn off */
 		break;
 	}
 	return hwflow;
@@ -208,29 +232,29 @@ void enable_putc(void)
 /*
  * Output a single byte to the serial port.
  */
-void _serial_putc (const char c, const int dev_index)
+void _serial_putc(const char c, const int dev_index)
 {
-	S3C24X0_UART * const uart = S3C24X0_GetBase_UART(dev_index);
+	struct s3c24x0_uart *uart = s3c24x0_get_base_uart(dev_index);
 #ifdef CONFIG_MODEM_SUPPORT
 	if (be_quiet)
 		return;
 #endif
 
-	/* wait for room in the tx FIFO */
-	while (!(uart->UTRSTAT & 0x2));
+	while (!(readl(&uart->UTRSTAT) & 0x2))
+		/* wait for room in the tx FIFO */ ;
 
 #ifdef CONFIG_HWFLOW
-	/* Wait for CTS up */
-	while(hwflow && !(uart->UMSTAT & 0x1))
-		;
+	while (hwflow && !(readl(&uart->UMSTAT) & 0x1))
+		/* Wait for CTS up */ ;
 #endif
 
-	uart->UTXH = c;
+	writeb(c, &uart->UTXH);
 
 	/* If \n, also do \r */
 	if (c == '\n')
-		serial_putc ('\r');
+		serial_putc('\r');
 }
+
 #if defined(CONFIG_SERIAL_MULTI)
 static inline void serial_putc_dev(unsigned int dev_index, const char c)
 {
@@ -249,13 +273,13 @@ void serial_putc(const char c)
  */
 int _serial_tstc(const int dev_index)
 {
-	S3C24X0_UART * const uart = S3C24X0_GetBase_UART(dev_index);
+	struct s3c24x0_uart *uart = s3c24x0_get_base_uart(dev_index);
 
-	return uart->UTRSTAT & 0x1;
+	return readl(&uart->UTRSTAT) & 0x1;
 }
+
 #if defined(CONFIG_SERIAL_MULTI)
-static inline int
-serial_tstc_dev(unsigned int dev_index)
+static inline int serial_tstc_dev(unsigned int dev_index)
 {
 	return _serial_tstc(dev_index);
 }
@@ -269,18 +293,17 @@ int serial_tstc(void)
 void _serial_puts(const char *s, const int dev_index)
 {
 	while (*s) {
-		_serial_putc (*s++, dev_index);
+		_serial_putc(*s++, dev_index);
 	}
 }
+
 #if defined(CONFIG_SERIAL_MULTI)
-static inline void
-serial_puts_dev(int dev_index, const char *s)
+static inline void serial_puts_dev(int dev_index, const char *s)
 {
 	_serial_puts(s, dev_index);
 }
 #else
-void
-serial_puts (const char *s)
+void serial_puts(const char *s)
 {
 	_serial_puts(s, UART_NR);
 }
@@ -289,12 +312,11 @@ serial_puts (const char *s)
 #if defined(CONFIG_SERIAL_MULTI)
 DECLARE_S3C_SERIAL_FUNCTIONS(0);
 struct serial_device s3c24xx_serial0_device =
-	INIT_S3C_SERIAL_STRUCTURE(0, "s3ser0", "S3UART1");
+INIT_S3C_SERIAL_STRUCTURE(0, "s3ser0", "S3UART1");
 DECLARE_S3C_SERIAL_FUNCTIONS(1);
 struct serial_device s3c24xx_serial1_device =
-	INIT_S3C_SERIAL_STRUCTURE(1, "s3ser1", "S3UART2");
+INIT_S3C_SERIAL_STRUCTURE(1, "s3ser1", "S3UART2");
 DECLARE_S3C_SERIAL_FUNCTIONS(2);
 struct serial_device s3c24xx_serial2_device =
-	INIT_S3C_SERIAL_STRUCTURE(2, "s3ser2", "S3UART3");
-
+INIT_S3C_SERIAL_STRUCTURE(2, "s3ser2", "S3UART3");
 #endif /* CONFIG_SERIAL_MULTI */
diff --git a/drivers/serial/serial_s5pc1xx.c b/drivers/serial/serial_s5pc1xx.c
new file mode 100644
index 0000000000..68c06a9190
--- /dev/null
+++ b/drivers/serial/serial_s5pc1xx.c
@@ -0,0 +1,195 @@
+/*
+ * (C) Copyright 2009 SAMSUNG Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ * Heungjun Kim <riverful.kim@samsung.com>
+ *
+ * based on drivers/serial/s3c64xx.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/uart.h>
+#include <asm/arch/clk.h>
+#include <serial.h>
+
+static inline struct s5pc1xx_uart *s5pc1xx_get_base_uart(int dev_index)
+{
+	u32 offset = dev_index * sizeof(struct s5pc1xx_uart);
+
+	if (cpu_is_s5pc100())
+		return (struct s5pc1xx_uart *)(S5PC100_UART_BASE + offset);
+	else
+		return (struct s5pc1xx_uart *)(S5PC110_UART_BASE + offset);
+}
+
+/*
+ * The coefficient, used to calculate the baudrate on S5PC1XX UARTs is
+ * calculated as
+ * C = UBRDIV * 16 + number_of_set_bits_in_UDIVSLOT
+ * however, section 31.6.11 of the datasheet doesn't recomment using 1 for 1,
+ * 3 for 2, ... (2^n - 1) for n, instead, they suggest using these constants:
+ */
+static const int udivslot[] = {
+	0,
+	0x0080,
+	0x0808,
+	0x0888,
+	0x2222,
+	0x4924,
+	0x4a52,
+	0x54aa,
+	0x5555,
+	0xd555,
+	0xd5d5,
+	0xddd5,
+	0xdddd,
+	0xdfdd,
+	0xdfdf,
+	0xffdf,
+};
+
+void serial_setbrg_dev(const int dev_index)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	struct s5pc1xx_uart *const uart = s5pc1xx_get_base_uart(dev_index);
+	u32 pclk = get_pclk();
+	u32 baudrate = gd->baudrate;
+	u32 val;
+
+	val = pclk / baudrate;
+
+	writel(val / 16 - 1, &uart->ubrdiv);
+	writew(udivslot[val % 16], &uart->udivslot);
+}
+
+/*
+ * Initialise the serial port with the given baudrate. The settings
+ * are always 8 data bits, no parity, 1 stop bit, no start bits.
+ */
+int serial_init_dev(const int dev_index)
+{
+	struct s5pc1xx_uart *const uart = s5pc1xx_get_base_uart(dev_index);
+
+	/* reset and enable FIFOs, set triggers to the maximum */
+	writel(0, &uart->ufcon);
+	writel(0, &uart->umcon);
+	/* 8N1 */
+	writel(0x3, &uart->ulcon);
+	/* No interrupts, no DMA, pure polling */
+	writel(0x245, &uart->ucon);
+
+	serial_setbrg_dev(dev_index);
+
+	return 0;
+}
+
+static int serial_err_check(const int dev_index)
+{
+	struct s5pc1xx_uart *const uart = s5pc1xx_get_base_uart(dev_index);
+
+	if (readl(&uart->uerstat) & 0xf)
+		return 1;
+
+	return 0;
+}
+
+/*
+ * Read a single byte from the serial port. Returns 1 on success, 0
+ * otherwise. When the function is succesfull, the character read is
+ * written into its argument c.
+ */
+int serial_getc_dev(const int dev_index)
+{
+	struct s5pc1xx_uart *const uart = s5pc1xx_get_base_uart(dev_index);
+
+	/* wait for character to arrive */
+	while (!(readl(&uart->utrstat) & 0x1)) {
+		if (serial_err_check(dev_index))
+			return 0;
+	}
+
+	return (int)(readl(&uart->urxh) & 0xff);
+}
+
+/*
+ * Output a single byte to the serial port.
+ */
+void serial_putc_dev(const char c, const int dev_index)
+{
+	struct s5pc1xx_uart *const uart = s5pc1xx_get_base_uart(dev_index);
+
+	/* wait for room in the tx FIFO */
+	while (!(readl(&uart->utrstat) & 0x2)) {
+		if (serial_err_check(dev_index))
+			return;
+	}
+
+	writel(c, &uart->utxh);
+
+	/* If \n, also do \r */
+	if (c == '\n')
+		serial_putc('\r');
+}
+
+/*
+ * Test whether a character is in the RX buffer
+ */
+int serial_tstc_dev(const int dev_index)
+{
+	struct s5pc1xx_uart *const uart = s5pc1xx_get_base_uart(dev_index);
+
+	return (int)(readl(&uart->utrstat) & 0x1);
+}
+
+void serial_puts_dev(const char *s, const int dev_index)
+{
+	while (*s)
+		serial_putc_dev(*s++, dev_index);
+}
+
+/* Multi serial device functions */
+#define DECLARE_S5P_SERIAL_FUNCTIONS(port) \
+int s5p_serial##port##_init(void) { return serial_init_dev(port); } \
+void s5p_serial##port##_setbrg(void) { serial_setbrg_dev(port); } \
+int s5p_serial##port##_getc(void) { return serial_getc_dev(port); } \
+int s5p_serial##port##_tstc(void) { return serial_tstc_dev(port); } \
+void s5p_serial##port##_putc(const char c) { serial_putc_dev(c, port); } \
+void s5p_serial##port##_puts(const char *s) { serial_puts_dev(s, port); }
+
+#define INIT_S5P_SERIAL_STRUCTURE(port, name, bus) { \
+	name, \
+	bus, \
+	s5p_serial##port##_init, \
+	s5p_serial##port##_setbrg, \
+	s5p_serial##port##_getc, \
+	s5p_serial##port##_tstc, \
+	s5p_serial##port##_putc, \
+	s5p_serial##port##_puts, }
+
+DECLARE_S5P_SERIAL_FUNCTIONS(0);
+struct serial_device s5pc1xx_serial0_device =
+	INIT_S5P_SERIAL_STRUCTURE(0, "s5pser0", "S5PUART0");
+DECLARE_S5P_SERIAL_FUNCTIONS(1);
+struct serial_device s5pc1xx_serial1_device =
+	INIT_S5P_SERIAL_STRUCTURE(1, "s5pser1", "S5PUART1");
+DECLARE_S5P_SERIAL_FUNCTIONS(2);
+struct serial_device s5pc1xx_serial2_device =
+	INIT_S5P_SERIAL_STRUCTURE(2, "s5pser2", "S5PUART2");
+DECLARE_S5P_SERIAL_FUNCTIONS(3);
+struct serial_device s5pc1xx_serial3_device =
+	INIT_S5P_SERIAL_STRUCTURE(3, "s5pser3", "S5PUART3");