summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorBen Gardiner <bengardiner@nanometrics.ca>2010-09-23 09:58:43 -0400
committerBen Warren <biggerbadderben@gmail.com>2010-10-11 23:07:17 -0700
commit7b37a27e14975f32528552deed453b56a4149818 (patch)
tree97b76f279c64ac3be9b186060e4aab0e969fcc53 /drivers
parent042272a6f2fce3bf610a84cbfde3676b53c0d8dd (diff)
downloadtalos-obmc-uboot-7b37a27e14975f32528552deed453b56a4149818.tar.gz
talos-obmc-uboot-7b37a27e14975f32528552deed453b56a4149818.zip
davinci_emac: davinci_eth_set_mac_addr to ->write_hwaddr
This patch proposes to migrate the davinci_emac driver to using the eth_device->write_hwaddr function pointer as suggested by Ben Warren. All the davinci boards had the behaviour, prior to this patch, of sync'ing the environment variable enetaddr with the MAC address read from non-volatile storage on boot -- when the two locations disagreed, the environment variable value took precendence. This patch keeps the same behaviour but lets eth_initialize take care of it. This patch refactors davinci_emac setup in the boards so that the MAC address is read from non-volatile storage into the environment variable and then the environment variable value is use in eth_intialize. The only exception is the direct call to davinci_eth_set_mac_addr made by the da830evm board init which was changed into an assignment of the enetaddr field. Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Tested-by: Nick Thompson <nick.thompson@ge.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/net/davinci_emac.c80
1 files changed, 39 insertions, 41 deletions
diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
index 41a9910919..e06896fea7 100644
--- a/drivers/net/davinci_emac.c
+++ b/drivers/net/davinci_emac.c
@@ -65,21 +65,6 @@ void eth_mdio_enable(void)
davinci_eth_mdio_enable();
}
-static u_int8_t davinci_eth_mac_addr[] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
-
-/*
- * This function must be called before emac_open() if you want to override
- * the default mac address.
- */
-void davinci_eth_set_mac_addr(const u_int8_t *addr)
-{
- int i;
-
- for (i = 0; i < sizeof (davinci_eth_mac_addr); i++) {
- davinci_eth_mac_addr[i] = addr[i];
- }
-}
-
/* EMAC Addresses */
static volatile emac_regs *adap_emac = (emac_regs *)EMAC_BASE_ADDR;
static volatile ewrap_regs *adap_ewrap = (ewrap_regs *)EMAC_WRAPPER_BASE_ADDR;
@@ -100,6 +85,43 @@ static volatile u_int8_t active_phy_addr = 0xff;
phy_t phy;
+static int davinci_eth_set_mac_addr(struct eth_device *dev)
+{
+ unsigned long mac_hi;
+ unsigned long mac_lo;
+
+ /*
+ * Set MAC Addresses & Init multicast Hash to 0 (disable any multicast
+ * receive)
+ * Using channel 0 only - other channels are disabled
+ * */
+ writel(0, &adap_emac->MACINDEX);
+ mac_hi = (dev->enetaddr[3] << 24) |
+ (dev->enetaddr[2] << 16) |
+ (dev->enetaddr[1] << 8) |
+ (dev->enetaddr[0]);
+ mac_lo = (dev->enetaddr[5] << 8) |
+ (dev->enetaddr[4]);
+
+ writel(mac_hi, &adap_emac->MACADDRHI);
+#if defined(DAVINCI_EMAC_VERSION2)
+ writel(mac_lo | EMAC_MAC_ADDR_IS_VALID | EMAC_MAC_ADDR_MATCH,
+ &adap_emac->MACADDRLO);
+#else
+ writel(mac_lo, &adap_emac->MACADDRLO);
+#endif
+
+ writel(0, &adap_emac->MACHASH1);
+ writel(0, &adap_emac->MACHASH2);
+
+ /* Set source MAC address - REQUIRED */
+ writel(mac_hi, &adap_emac->MACSRCADDRHI);
+ writel(mac_lo, &adap_emac->MACSRCADDRLO);
+
+
+ return 0;
+}
+
static void davinci_eth_mdio_enable(void)
{
u_int32_t clkdiv;
@@ -286,8 +308,6 @@ static int davinci_eth_open(struct eth_device *dev, bd_t *bis)
dv_reg_p addr;
u_int32_t clkdiv, cnt;
volatile emac_desc *rx_desc;
- unsigned long mac_hi;
- unsigned long mac_lo;
debug_emac("+ emac_open\n");
@@ -311,30 +331,7 @@ static int davinci_eth_open(struct eth_device *dev, bd_t *bis)
writel(1, &adap_emac->TXCONTROL);
writel(1, &adap_emac->RXCONTROL);
- /* Set MAC Addresses & Init multicast Hash to 0 (disable any multicast receive) */
- /* Using channel 0 only - other channels are disabled */
- writel(0, &adap_emac->MACINDEX);
- mac_hi = (davinci_eth_mac_addr[3] << 24) |
- (davinci_eth_mac_addr[2] << 16) |
- (davinci_eth_mac_addr[1] << 8) |
- (davinci_eth_mac_addr[0]);
- mac_lo = (davinci_eth_mac_addr[5] << 8) |
- (davinci_eth_mac_addr[4]);
-
- writel(mac_hi, &adap_emac->MACADDRHI);
-#if defined(DAVINCI_EMAC_VERSION2)
- writel(mac_lo | EMAC_MAC_ADDR_IS_VALID | EMAC_MAC_ADDR_MATCH,
- &adap_emac->MACADDRLO);
-#else
- writel(mac_lo, &adap_emac->MACADDRLO);
-#endif
-
- writel(0, &adap_emac->MACHASH1);
- writel(0, &adap_emac->MACHASH2);
-
- /* Set source MAC address - REQUIRED */
- writel(mac_hi, &adap_emac->MACSRCADDRHI);
- writel(mac_lo, &adap_emac->MACSRCADDRLO);
+ davinci_eth_set_mac_addr(dev);
/* Set DMA 8 TX / 8 RX Head pointers to 0 */
addr = &adap_emac->TX0HDP;
@@ -636,6 +633,7 @@ int davinci_emac_initialize(void)
dev->halt = davinci_eth_close;
dev->send = davinci_eth_send_packet;
dev->recv = davinci_eth_rcv_packet;
+ dev->write_hwaddr = davinci_eth_set_mac_addr;
eth_register(dev);
OpenPOWER on IntegriCloud