Merge git://git.denx.de/u-boot-x86

Conflicts:
	arch/x86/cpu/Makefile

Signed-off-by: Tom Rini <trini@ti.com>

3 files changed, 107 insertions, 26 deletions

diff --git a/drivers/gpio/gpio-uclass.c b/drivers/gpio/gpio-uclass.c
index 45e9a5ad22..255700ab18 100644
--- a/drivers/gpio/gpio-uclass.c
+++ b/drivers/gpio/gpio-uclass.c
@@ -390,6 +390,25 @@ int gpio_get_status(struct udevice *dev, int offset, char *buf, int buffsize)
 	return 0;
 }
 
+/*
+ * get a number comprised of multiple GPIO values. gpio_num_array points to
+ * the array of gpio pin numbers to scan, terminated by -1.
+ */
+unsigned gpio_get_values_as_int(const int *gpio_num_array)
+{
+	int gpio;
+	unsigned bitmask = 1;
+	unsigned vector = 0;
+
+	while (bitmask &&
+	       ((gpio = *gpio_num_array++) != -1)) {
+		if (gpio_get_value(gpio))
+			vector |= bitmask;
+		bitmask <<= 1;
+	}
+	return vector;
+}
+
 /* We need to renumber the GPIOs when any driver is probed/removed */
 static int gpio_renumber(struct udevice *removed_dev)
 {
diff --git a/drivers/gpio/intel_ich6_gpio.c b/drivers/gpio/intel_ich6_gpio.c
index d3381b0369..b095d17f57 100644
--- a/drivers/gpio/intel_ich6_gpio.c
+++ b/drivers/gpio/intel_ich6_gpio.c
@@ -33,6 +33,11 @@
 #include <pci.h>
 #include <asm/gpio.h>
 #include <asm/io.h>
+#include <asm/pci.h>
+#ifdef CONFIG_X86_RESET_VECTOR
+#include <asm/arch/pch.h>
+#define SUPPORT_GPIO_SETUP
+#endif
 
 #define GPIO_PER_BANK	32
 
@@ -46,6 +51,53 @@ struct ich6_bank_priv {
 	uint32_t lvl;
 };
 
+#ifdef SUPPORT_GPIO_SETUP
+static void setup_pch_gpios(const struct pch_gpio_map *gpio)
+{
+	u16 gpiobase = pci_read_config16(PCH_LPC_DEV, GPIO_BASE) & 0xfffc;
+
+	/* GPIO Set 1 */
+	if (gpio->set1.level)
+		outl(*((u32 *)gpio->set1.level), gpiobase + GP_LVL);
+	if (gpio->set1.mode)
+		outl(*((u32 *)gpio->set1.mode), gpiobase + GPIO_USE_SEL);
+	if (gpio->set1.direction)
+		outl(*((u32 *)gpio->set1.direction), gpiobase + GP_IO_SEL);
+	if (gpio->set1.reset)
+		outl(*((u32 *)gpio->set1.reset), gpiobase + GP_RST_SEL1);
+	if (gpio->set1.invert)
+		outl(*((u32 *)gpio->set1.invert), gpiobase + GPI_INV);
+	if (gpio->set1.blink)
+		outl(*((u32 *)gpio->set1.blink), gpiobase + GPO_BLINK);
+
+	/* GPIO Set 2 */
+	if (gpio->set2.level)
+		outl(*((u32 *)gpio->set2.level), gpiobase + GP_LVL2);
+	if (gpio->set2.mode)
+		outl(*((u32 *)gpio->set2.mode), gpiobase + GPIO_USE_SEL2);
+	if (gpio->set2.direction)
+		outl(*((u32 *)gpio->set2.direction), gpiobase + GP_IO_SEL2);
+	if (gpio->set2.reset)
+		outl(*((u32 *)gpio->set2.reset), gpiobase + GP_RST_SEL2);
+
+	/* GPIO Set 3 */
+	if (gpio->set3.level)
+		outl(*((u32 *)gpio->set3.level), gpiobase + GP_LVL3);
+	if (gpio->set3.mode)
+		outl(*((u32 *)gpio->set3.mode), gpiobase + GPIO_USE_SEL3);
+	if (gpio->set3.direction)
+		outl(*((u32 *)gpio->set3.direction), gpiobase + GP_IO_SEL3);
+	if (gpio->set3.reset)
+		outl(*((u32 *)gpio->set3.reset), gpiobase + GP_RST_SEL3);
+}
+
+/* TODO: Move this to device tree, or platform data */
+void ich_gpio_set_gpio_map(const struct pch_gpio_map *map)
+{
+	gd->arch.gpio_map = map;
+}
+#endif /* SUPPORT_GPIO_SETUP */
+
 static int gpio_ich6_ofdata_to_platdata(struct udevice *dev)
 {
 	struct ich6_bank_platdata *plat = dev_get_platdata(dev);
@@ -60,13 +112,13 @@ static int gpio_ich6_ofdata_to_platdata(struct udevice *dev)
 	pci_dev = PCI_BDF(0, 0x1f, 0);
 
 	/* Is the device present? */
-	pci_read_config_word(pci_dev, PCI_VENDOR_ID, &tmpword);
+	tmpword = pci_read_config16(pci_dev, PCI_VENDOR_ID);
 	if (tmpword != PCI_VENDOR_ID_INTEL) {
 		debug("%s: wrong VendorID\n", __func__);
 		return -ENODEV;
 	}
 
-	pci_read_config_word(pci_dev, PCI_DEVICE_ID, &tmpword);
+	tmpword = pci_read_config16(pci_dev, PCI_DEVICE_ID);
 	debug("Found %04x:%04x\n", PCI_VENDOR_ID_INTEL, tmpword);
 	/*
 	 * We'd like to validate the Device ID too, but pretty much any
@@ -76,34 +128,34 @@ static int gpio_ich6_ofdata_to_platdata(struct udevice *dev)
 	 */
 
 	/* I/O should already be enabled (it's a RO bit). */
-	pci_read_config_word(pci_dev, PCI_COMMAND, &tmpword);
+	tmpword = pci_read_config16(pci_dev, PCI_COMMAND);
 	if (!(tmpword & PCI_COMMAND_IO)) {
 		debug("%s: device IO not enabled\n", __func__);
 		return -ENODEV;
 	}
 
 	/* Header Type must be normal (bits 6-0 only; see spec.) */
-	pci_read_config_byte(pci_dev, PCI_HEADER_TYPE, &tmpbyte);
+	tmpbyte = pci_read_config8(pci_dev, PCI_HEADER_TYPE);
 	if ((tmpbyte & 0x7f) != PCI_HEADER_TYPE_NORMAL) {
 		debug("%s: invalid Header type\n", __func__);
 		return -ENODEV;
 	}
 
 	/* Base Class must be a bridge device */
-	pci_read_config_byte(pci_dev, PCI_CLASS_CODE, &tmpbyte);
+	tmpbyte = pci_read_config8(pci_dev, PCI_CLASS_CODE);
 	if (tmpbyte != PCI_CLASS_CODE_BRIDGE) {
 		debug("%s: invalid class\n", __func__);
 		return -ENODEV;
 	}
 	/* Sub Class must be ISA */
-	pci_read_config_byte(pci_dev, PCI_CLASS_SUB_CODE, &tmpbyte);
+	tmpbyte = pci_read_config8(pci_dev, PCI_CLASS_SUB_CODE);
 	if (tmpbyte != PCI_CLASS_SUB_CODE_BRIDGE_ISA) {
 		debug("%s: invalid subclass\n", __func__);
 		return -ENODEV;
 	}
 
 	/* Programming Interface must be 0x00 (no others exist) */
-	pci_read_config_byte(pci_dev, PCI_CLASS_PROG, &tmpbyte);
+	tmpbyte = pci_read_config8(pci_dev, PCI_CLASS_PROG);
 	if (tmpbyte != 0x00) {
 		debug("%s: invalid interface type\n", __func__);
 		return -ENODEV;
@@ -114,7 +166,7 @@ static int gpio_ich6_ofdata_to_platdata(struct udevice *dev)
 	 * that it was unused (or undocumented). Check that it looks
 	 * okay: not all ones or zeros, and mapped to I/O space (bit 0).
 	 */
-	pci_read_config_dword(pci_dev, PCI_CFG_GPIOBASE, &tmplong);
+	tmplong = pci_read_config32(pci_dev, PCI_CFG_GPIOBASE);
 	if (tmplong == 0x00000000 || tmplong == 0xffffffff ||
 	    !(tmplong & 0x00000001)) {
 		debug("%s: unexpected GPIOBASE value\n", __func__);
@@ -140,12 +192,18 @@ static int gpio_ich6_ofdata_to_platdata(struct udevice *dev)
 	return 0;
 }
 
-int ich6_gpio_probe(struct udevice *dev)
+static int ich6_gpio_probe(struct udevice *dev)
 {
 	struct ich6_bank_platdata *plat = dev_get_platdata(dev);
 	struct gpio_dev_priv *uc_priv = dev->uclass_priv;
 	struct ich6_bank_priv *bank = dev_get_priv(dev);
 
+#ifdef SUPPORT_GPIO_SETUP
+	if (gd->arch.gpio_map) {
+		setup_pch_gpios(gd->arch.gpio_map);
+		gd->arch.gpio_map = NULL;
+	}
+#endif
 	uc_priv->gpio_count = GPIO_PER_BANK;
 	uc_priv->bank_name = plat->bank_name;
 	bank->use_sel = plat->base_addr;
@@ -155,7 +213,8 @@ int ich6_gpio_probe(struct udevice *dev)
 	return 0;
 }
 
-int ich6_gpio_request(struct udevice *dev, unsigned offset, const char *label)
+static int ich6_gpio_request(struct udevice *dev, unsigned offset,
+			     const char *label)
 {
 	struct ich6_bank_priv *bank = dev_get_priv(dev);
 	u32 tmplong;
diff --git a/drivers/serial/serial-uclass.c b/drivers/serial/serial-uclass.c
index 71f1a5cb91..0f019c8f50 100644
--- a/drivers/serial/serial-uclass.c
+++ b/drivers/serial/serial-uclass.c
@@ -19,15 +19,14 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-/* The currently-selected console serial device */
-struct udevice *cur_dev __attribute__ ((section(".data")));
-
 #ifndef CONFIG_SYS_MALLOC_F_LEN
 #error "Serial is required before relocation - define CONFIG_SYS_MALLOC_F_LEN to make this work"
 #endif
 
 static void serial_find_console_or_panic(void)
 {
+	struct udevice *dev;
+
 #ifdef CONFIG_OF_CONTROL
 	int node;
 
@@ -35,18 +34,21 @@ static void serial_find_console_or_panic(void)
 	node = fdtdec_get_chosen_node(gd->fdt_blob, "stdout-path");
 	if (node < 0)
 		node = fdtdec_get_alias_node(gd->fdt_blob, "console");
-	if (!uclass_get_device_by_of_offset(UCLASS_SERIAL, node, &cur_dev))
+	if (!uclass_get_device_by_of_offset(UCLASS_SERIAL, node, &dev)) {
+		gd->cur_serial_dev = dev;
 		return;
+	}
 
 	/*
 	 * If the console is not marked to be bound before relocation, bind
 	 * it anyway.
 	 */
 	if (node > 0 &&
-	    !lists_bind_fdt(gd->dm_root, gd->fdt_blob, node, &cur_dev)) {
-		if (!device_probe(cur_dev))
+	    !lists_bind_fdt(gd->dm_root, gd->fdt_blob, node, &dev)) {
+		if (!device_probe(dev)) {
+			gd->cur_serial_dev = dev;
 			return;
-		cur_dev = NULL;
+		}
 	}
 #endif
 	/*
@@ -61,11 +63,12 @@ static void serial_find_console_or_panic(void)
 #else
 #define INDEX 0
 #endif
-	if (uclass_get_device_by_seq(UCLASS_SERIAL, INDEX, &cur_dev) &&
-	    uclass_get_device(UCLASS_SERIAL, INDEX, &cur_dev) &&
-	    (uclass_first_device(UCLASS_SERIAL, &cur_dev) || !cur_dev))
+	if (uclass_get_device_by_seq(UCLASS_SERIAL, INDEX, &dev) &&
+	    uclass_get_device(UCLASS_SERIAL, INDEX, &dev) &&
+	    (uclass_first_device(UCLASS_SERIAL, &dev) || !dev))
 		panic("No serial driver found");
 #undef INDEX
+	gd->cur_serial_dev = dev;
 }
 
 /* Called prior to relocation */
@@ -127,30 +130,30 @@ static int _serial_tstc(struct udevice *dev)
 
 void serial_putc(char ch)
 {
-	_serial_putc(cur_dev, ch);
+	_serial_putc(gd->cur_serial_dev, ch);
 }
 
 void serial_puts(const char *str)
 {
-	_serial_puts(cur_dev, str);
+	_serial_puts(gd->cur_serial_dev, str);
 }
 
 int serial_getc(void)
 {
-	return _serial_getc(cur_dev);
+	return _serial_getc(gd->cur_serial_dev);
 }
 
 int serial_tstc(void)
 {
-	return _serial_tstc(cur_dev);
+	return _serial_tstc(gd->cur_serial_dev);
 }
 
 void serial_setbrg(void)
 {
-	struct dm_serial_ops *ops = serial_get_ops(cur_dev);
+	struct dm_serial_ops *ops = serial_get_ops(gd->cur_serial_dev);
 
 	if (ops->setbrg)
-		ops->setbrg(cur_dev, gd->baudrate);
+		ops->setbrg(gd->cur_serial_dev, gd->baudrate);
 }
 
 void serial_stdio_init(void)