video: Add support for the ANX9804 parallel lcd to dp bridge chip

Add support for the ANX9804 bridge chip, which can take pixel data coming
from a parallel LCD interface and translate it on the fly into a DP
interface for driving eDP TFT displays. It uses I2C for configuration.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Anatolij Gustschin <agust@denx.de>

4 files changed, 222 insertions, 0 deletions

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 5cb36851e7..1dc082a7a5 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -151,6 +151,14 @@ config FRAMEBUFFER_VESA_MODE
 	default 0x11B if FRAMEBUFFER_VESA_MODE_11B
 	default 0x117 if FRAMEBUFFER_VESA_MODE_USER
 
+config VIDEO_LCD_ANX9804
+	bool "ANX9804 bridge chip"
+	default n
+	---help---
+	Support for the ANX9804 bridge chip, which can take pixel data coming
+	from a parallel LCD interface and translate it on the fy into a DP
+	interface for driving eDP TFT displays. It uses I2C for configuration.
+
 config VIDEO_LCD_SSD2828
 	bool "SSD2828 bridge chip"
 	default n
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index c2c4dfc57e..e85fd8a677 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -33,6 +33,7 @@ obj-$(CONFIG_VIDEO_COREBOOT) += coreboot_fb.o
 obj-$(CONFIG_VIDEO_CT69000) += ct69000.o videomodes.o
 obj-$(CONFIG_VIDEO_DA8XX) += da8xx-fb.o videomodes.o
 obj-$(CONFIG_VIDEO_IMX25LCDC) += imx25lcdc.o videomodes.o
+obj-$(CONFIG_VIDEO_LCD_ANX9804) += anx9804.o
 obj-$(CONFIG_VIDEO_LCD_HITACHI_TX18D42VM) += hitachi_tx18d42vm_lcd.o
 obj-$(CONFIG_VIDEO_LCD_SSD2828) += ssd2828.o
 obj-$(CONFIG_VIDEO_MB862xx) += mb862xx.o videomodes.o
diff --git a/drivers/video/anx9804.c b/drivers/video/anx9804.c
new file mode 100755
index 0000000000..83d60d672d
--- /dev/null
+++ b/drivers/video/anx9804.c
@@ -0,0 +1,188 @@
+/*
+ * (C) 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/*
+ * Support for the ANX9804 bridge chip, which can take pixel data coming
+ * from a parallel LCD interface and translate it on the flight into a DP
+ * interface for driving eDP TFT displays.
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include "anx9804.h"
+
+#define BIT(x) (1 << (x))
+
+/* Registers at i2c address 0x38 */
+
+#define ANX9804_HDCP_CONTROL_0_REG				0x01
+
+#define ANX9804_SYS_CTRL2_REG					0x81
+#define ANX9804_SYS_CTRL2_CHA_STA				0x04
+
+#define ANX9804_SYS_CTRL3_REG					0x82
+#define ANX9804_SYS_CTRL3_VALID_CTRL				BIT(0)
+#define ANX9804_SYS_CTRL3_F_VALID				BIT(1)
+#define ANX9804_SYS_CTRL3_HPD_CTRL				BIT(4)
+#define ANX9804_SYS_CTRL3_F_HPD					BIT(5)
+
+#define ANX9804_LINK_BW_SET_REG					0xa0
+#define ANX9804_LANE_COUNT_SET_REG				0xa1
+#define ANX9804_TRAINING_PTN_SET_REG				0xa2
+#define ANX9804_TRAINING_LANE0_SET_REG				0xa3
+#define ANX9804_TRAINING_LANE1_SET_REG				0xa4
+#define ANX9804_TRAINING_LANE2_SET_REG				0xa5
+#define ANX9804_TRAINING_LANE3_SET_REG				0xa6
+
+#define ANX9804_LINK_TRAINING_CTRL_REG				0xa8
+#define ANX9804_LINK_TRAINING_CTRL_EN				BIT(0)
+
+#define ANX9804_LINK_DEBUG_REG					0xb8
+#define ANX9804_PLL_CTRL_REG					0xc7	
+#define ANX9804_ANALOG_POWER_DOWN_REG				0xc8
+
+/* Registers at i2c address 0x39 */
+
+#define ANX9804_DEV_IDH_REG					0x03
+
+#define ANX9804_POWERD_CTRL_REG					0x05
+#define ANX9804_POWERD_AUDIO					BIT(4)
+
+#define ANX9804_RST_CTRL_REG					0x06
+
+#define ANX9804_RST_CTRL2_REG					0x07
+#define ANX9804_RST_CTRL2_AUX					BIT(2)
+#define ANX9804_RST_CTRL2_AC_MODE				BIT(6)
+
+#define ANX9804_VID_CTRL1_REG					0x08
+#define ANX9804_VID_CTRL1_VID_EN				BIT(7)
+#define ANX9804_VID_CTRL1_EDGE					BIT(0)
+
+#define ANX9804_VID_CTRL2_REG					0x09
+#define ANX9804_ANALOG_DEBUG_REG1				0xdc
+#define ANX9804_ANALOG_DEBUG_REG3				0xde
+#define ANX9804_PLL_FILTER_CTRL1				0xdf
+#define ANX9804_PLL_FILTER_CTRL3				0xe1
+#define ANX9804_PLL_FILTER_CTRL					0xe2
+#define ANX9804_PLL_CTRL3					0xe6
+
+/**
+ * anx9804_init() - Init anx9804 parallel lcd to edp bridge chip
+ *
+ * This function will init an anx9804 parallel lcd to dp bridge chip
+ * using the passed in parameters.
+ *
+ * @i2c_bus:	Number of the i2c bus to which the anx9804 is connected.
+ * @lanes:	Number of displayport lanes to use
+ * @data_rate:	Register value for the bandwidth reg 0x06: 1.62G, 0x0a: 2.7G
+ * @bpp:	Bits per pixel, must be 18 or 24
+ */
+void anx9804_init(unsigned int i2c_bus, u8 lanes, u8 data_rate, int bpp)
+{
+	unsigned int orig_i2c_bus = i2c_get_bus_num();
+	u8 c, colordepth;
+	int i;
+
+	i2c_set_bus_num(i2c_bus);
+
+	if (bpp == 18)
+		colordepth = 0x00; /* 6 bit */
+	else
+		colordepth = 0x10; /* 8 bit */
+
+	/* Reset */
+	i2c_reg_write(0x39, ANX9804_RST_CTRL_REG, 1);
+	mdelay(100);
+	i2c_reg_write(0x39, ANX9804_RST_CTRL_REG, 0);
+
+	/* Write 0 to the powerdown reg (powerup everything) */
+	i2c_reg_write(0x39, ANX9804_POWERD_CTRL_REG, 0);
+
+	c = i2c_reg_read(0x39, ANX9804_DEV_IDH_REG);
+	if (c != 0x98) {
+		printf("Error anx9804 chipid mismatch\n");
+		i2c_set_bus_num(orig_i2c_bus);
+		return;
+	}
+
+	for (i = 0; i < 100; i++) {
+		c = i2c_reg_read(0x38, ANX9804_SYS_CTRL2_REG);
+		i2c_reg_write(0x38, ANX9804_SYS_CTRL2_REG, c);
+		c = i2c_reg_read(0x38, ANX9804_SYS_CTRL2_REG);
+		if ((c & ANX9804_SYS_CTRL2_CHA_STA) == 0)
+			break;
+
+		mdelay(5);
+	}
+	if (i == 100)
+		printf("Error anx9804 clock is not stable\n");
+
+	i2c_reg_write(0x39, ANX9804_VID_CTRL2_REG, colordepth);
+	
+	/* Set a bunch of analog related register values */
+	i2c_reg_write(0x38, ANX9804_PLL_CTRL_REG, 0x07); 
+	i2c_reg_write(0x39, ANX9804_PLL_FILTER_CTRL3, 0x19); 
+	i2c_reg_write(0x39, ANX9804_PLL_CTRL3, 0xd9); 
+	i2c_reg_write(0x39, ANX9804_RST_CTRL2_REG, ANX9804_RST_CTRL2_AC_MODE);
+	i2c_reg_write(0x39, ANX9804_ANALOG_DEBUG_REG1, 0xf0);
+	i2c_reg_write(0x39, ANX9804_ANALOG_DEBUG_REG3, 0x99);
+	i2c_reg_write(0x39, ANX9804_PLL_FILTER_CTRL1, 0x7b);
+	i2c_reg_write(0x38, ANX9804_LINK_DEBUG_REG, 0x30);
+	i2c_reg_write(0x39, ANX9804_PLL_FILTER_CTRL, 0x06);
+
+	/* Force HPD */
+	i2c_reg_write(0x38, ANX9804_SYS_CTRL3_REG,
+		      ANX9804_SYS_CTRL3_F_HPD | ANX9804_SYS_CTRL3_HPD_CTRL);
+
+	/* Power up and configure lanes */
+	i2c_reg_write(0x38, ANX9804_ANALOG_POWER_DOWN_REG, 0x00);
+	i2c_reg_write(0x38, ANX9804_TRAINING_LANE0_SET_REG, 0x00);
+	i2c_reg_write(0x38, ANX9804_TRAINING_LANE1_SET_REG, 0x00);
+	i2c_reg_write(0x38, ANX9804_TRAINING_LANE2_SET_REG, 0x00);
+	i2c_reg_write(0x38, ANX9804_TRAINING_LANE3_SET_REG, 0x00);
+
+	/* Reset AUX CH */
+	i2c_reg_write(0x39, ANX9804_RST_CTRL2_REG,
+		      ANX9804_RST_CTRL2_AC_MODE | ANX9804_RST_CTRL2_AUX);
+	i2c_reg_write(0x39, ANX9804_RST_CTRL2_REG,
+		      ANX9804_RST_CTRL2_AC_MODE);
+
+	/* Powerdown audio and some other unused bits */
+	i2c_reg_write(0x39, ANX9804_POWERD_CTRL_REG, ANX9804_POWERD_AUDIO);
+	i2c_reg_write(0x38, ANX9804_HDCP_CONTROL_0_REG, 0x00);
+	i2c_reg_write(0x38, 0xa7, 0x00);
+
+	/* Set data-rate / lanes */
+	i2c_reg_write(0x38, ANX9804_LINK_BW_SET_REG, data_rate);
+	i2c_reg_write(0x38, ANX9804_LANE_COUNT_SET_REG, lanes);
+
+	/* Link training */	
+	i2c_reg_write(0x38, ANX9804_LINK_TRAINING_CTRL_REG,
+		      ANX9804_LINK_TRAINING_CTRL_EN);
+	mdelay(5);
+	for (i = 0; i < 100; i++) {
+		c = i2c_reg_read(0x38, ANX9804_LINK_TRAINING_CTRL_REG);
+		if ((c & 0x01) == 0)
+			break;
+
+		mdelay(5);
+	}
+	if(i == 100) {
+		printf("Error anx9804 link training timeout\n");
+		i2c_set_bus_num(orig_i2c_bus);
+		return;
+	}
+
+	/* Enable */
+	i2c_reg_write(0x39, ANX9804_VID_CTRL1_REG,
+		      ANX9804_VID_CTRL1_VID_EN | ANX9804_VID_CTRL1_EDGE);
+	/* Force stream valid */
+	i2c_reg_write(0x38, ANX9804_SYS_CTRL3_REG,
+		      ANX9804_SYS_CTRL3_F_HPD | ANX9804_SYS_CTRL3_HPD_CTRL |
+		      ANX9804_SYS_CTRL3_F_VALID | ANX9804_SYS_CTRL3_VALID_CTRL);
+
+	i2c_set_bus_num(orig_i2c_bus);
+}
diff --git a/drivers/video/anx9804.h b/drivers/video/anx9804.h
new file mode 100644
index 0000000000..6c5daf92ea
--- /dev/null
+++ b/drivers/video/anx9804.h
@@ -0,0 +1,25 @@
+/*
+ * (C) 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/*
+ * Support for the ANX9804 bridge chip, which can take pixel data coming
+ * from a parallel LCD interface and translate it on the flight into a DP
+ * interface for driving eDP TFT displays.
+ */
+
+#ifndef _ANX9804_H
+#define _ANX9804_H
+
+#define ANX9804_DATA_RATE_1620M				0x06
+#define ANX9804_DATA_RATE_2700M				0x0a
+
+#ifdef CONFIG_VIDEO_LCD_PANEL_EDP_4_LANE_1620M_VIA_ANX9804
+void anx9804_init(unsigned int i2c_bus, u8 lanes, u8 data_rate, int bpp);
+#else
+static inline void anx9804_init(unsigned int i2c_bus, u8 lanes, u8 data_rate,
+				int bpp) {}
+#endif
+#endif