dm: i2c: tegra: Convert to driver model

This converts all Tegra boards over to use driver model for I2C. The driver
is adjusted to use driver model and the following obsolete CONFIGs are
removed:

   - CONFIG_SYS_I2C_INIT_BOARD
   - CONFIG_I2C_MULTI_BUS
   - CONFIG_SYS_MAX_I2C_BUS
   - CONFIG_SYS_I2C_SPEED
   - CONFIG_SYS_I2C

This has been tested on:
- trimslice (no I2C)
- beaver
- Jetson-TK1

It has not been tested on Tegra 114 as I don't have that board.

Acked-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>

1 files changed, 7 insertions, 20 deletions

diff --git a/drivers/power/tps6586x.c b/drivers/power/tps6586x.c
index d29d969533..29bab4cc00 100644
--- a/drivers/power/tps6586x.c
+++ b/drivers/power/tps6586x.c
@@ -10,9 +10,7 @@
 #include <asm/io.h>
 #include <i2c.h>
 
-static int bus_num;		/* I2C bus we are on */
-#define I2C_ADDRESS		0x34	/* chip requires this address */
-static char inited;		/* 1 if we have been inited */
+static struct udevice *tps6586x_dev;
 
 enum {
 	/* Registers that we access */
@@ -37,13 +35,9 @@ static int tps6586x_read(int reg)
 	int	i;
 	uchar	data;
 	int	retval = -1;
-	int	old_bus_num;
-
-	old_bus_num = i2c_get_bus_num();
-	i2c_set_bus_num(bus_num);
 
 	for (i = 0; i < MAX_I2C_RETRY; ++i) {
-		if (!i2c_read(I2C_ADDRESS, reg, 1, &data, 1)) {
+		if (!i2c_read(tps6586x_dev, reg,  &data, 1)) {
 			retval = (int)data;
 			goto exit;
 		}
@@ -53,7 +47,6 @@ static int tps6586x_read(int reg)
 	}
 
 exit:
-	i2c_set_bus_num(old_bus_num);
 	debug("pmu_read %x=%x\n", reg, retval);
 	if (retval < 0)
 		debug("%s: failed to read register %#x: %d\n", __func__, reg,
@@ -65,13 +58,9 @@ static int tps6586x_write(int reg, uchar *data, uint len)
 {
 	int	i;
 	int	retval = -1;
-	int	old_bus_num;
-
-	old_bus_num = i2c_get_bus_num();
-	i2c_set_bus_num(bus_num);
 
 	for (i = 0; i < MAX_I2C_RETRY; ++i) {
-		if (!i2c_write(I2C_ADDRESS, reg, 1, data, len)) {
+		if (!i2c_write(tps6586x_dev, reg, data, len)) {
 			retval = 0;
 			goto exit;
 		}
@@ -81,7 +70,6 @@ static int tps6586x_write(int reg, uchar *data, uint len)
 	}
 
 exit:
-	i2c_set_bus_num(old_bus_num);
 	debug("pmu_write %x=%x: ", reg, retval);
 	for (i = 0; i < len; i++)
 		debug("%x ", data[i]);
@@ -163,7 +151,7 @@ int tps6586x_set_pwm_mode(int mask)
 	uchar val;
 	int ret;
 
-	assert(inited);
+	assert(tps6586x_dev);
 	ret = tps6586x_read(PFM_MODE);
 	if (ret != -1) {
 		val = (uchar)ret;
@@ -184,7 +172,7 @@ int tps6586x_adjust_sm0_sm1(int sm0_target, int sm1_target, int step, int rate,
 	int sm0, sm1;
 	int bad;
 
-	assert(inited);
+	assert(tps6586x_dev);
 
 	/* get current voltage settings */
 	if (read_voltages(&sm0, &sm1)) {
@@ -255,10 +243,9 @@ int tps6586x_adjust_sm0_sm1(int sm0_target, int sm1_target, int step, int rate,
 	return bad ? -1 : 0;
 }
 
-int tps6586x_init(int bus)
+int tps6586x_init(struct udevice *dev)
 {
-	bus_num = bus;
-	inited = 1;
+	tps6586x_dev = dev;
 
 	return 0;
 }