sunxi: axp: Move axp gpio code to a separate axpi-gpio driver

Move the axp-gpio code out of the drivers/power/axp*.c code, and into
a new separate axpi-gpio driver.

This change drops supports for the gpio3 pin on the axp209, as that requires
special handling, and no boards are using it.

Besides cleaning things up by moving the code to a separate driver, as
a bonus this change also adds support for the (non vusb) gpio pins on the
axp221 and the gpio pins on the axp152.

The new axp-gpio driver gets its own Kconfig option, and is only enabled
on boards which need it. Besides that it only gets enabled in the regular
u-boot build and not for the SPL as we never need it in the SPL.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Ian Campbell <ijc@hellion.org.uk>

1 files changed, 0 insertions, 64 deletions

diff --git a/drivers/power/axp221.c b/drivers/power/axp221.c
index d49de86e97..7bbaec87e4 100644
--- a/drivers/power/axp221.c
+++ b/drivers/power/axp221.c
@@ -319,67 +319,3 @@ int axp221_get_sid(unsigned int *sid)
 
 	return 0;
 }
-
-int axp_gpio_direction_input(struct udevice *dev, unsigned pin)
-{
-	switch (pin) {
-	case SUNXI_GPIO_AXP0_VBUS_DETECT:
-		return 0;
-	default:
-		return -EINVAL;
-	}
-}
-
-int axp_gpio_direction_output(struct udevice *dev, unsigned pin, int val)
-{
-	int ret;
-
-	switch (pin) {
-	case SUNXI_GPIO_AXP0_VBUS_ENABLE:
-		ret = axp221_clrbits(AXP221_MISC_CTRL,
-				     AXP221_MISC_CTRL_N_VBUSEN_FUNC);
-		if (ret)
-			return ret;
-
-		return axp_gpio_set_value(dev, pin, val);
-	default:
-		return -EINVAL;
-	}
-}
-
-int axp_gpio_get_value(struct udevice *dev, unsigned pin)
-{
-	int ret;
-	u8 val;
-
-	switch (pin) {
-	case SUNXI_GPIO_AXP0_VBUS_DETECT:
-		ret = pmic_bus_read(AXP221_POWER_STATUS, &val);
-		if (ret)
-			return ret;
-
-		return !!(val & AXP221_POWER_STATUS_VBUS_AVAIL);
-	default:
-		return -EINVAL;
-	}
-}
-
-int axp_gpio_set_value(struct udevice *dev, unsigned pin, int val)
-{
-	int ret;
-
-	switch (pin) {
-	case SUNXI_GPIO_AXP0_VBUS_ENABLE:
-		if (val)
-			ret = axp221_setbits(AXP221_VBUS_IPSOUT,
-					     AXP221_VBUS_IPSOUT_DRIVEBUS);
-		else
-			ret = axp221_clrbits(AXP221_VBUS_IPSOUT,
-					     AXP221_VBUS_IPSOUT_DRIVEBUS);
-
-		if (ret)
-			return ret;
-	}
-
-	return 0;
-}