NE2000: Fix regresssion introduced by e710185aae90 on non AX88796

Move non-inlied functions into specific drivers file
Set get_prom as weak

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Vlad Lungu <vlad@comsys.ro>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

1 files changed, 1 insertions, 86 deletions

diff --git a/drivers/net/ne2000.h b/drivers/net/ne2000.h
index 6049482868..2cde6be437 100644
--- a/drivers/net/ne2000.h
+++ b/drivers/net/ne2000.h
@@ -81,6 +81,7 @@ are GPL, so this is, of course, GPL.
 
 #define DP_DATA		0x10
 #define START_PG	0x50	/* First page of TX buffer */
+#define START_PG2	0x48
 #define STOP_PG		0x80	/* Last page +1 of RX ring */
 
 #define RX_START	0x50
@@ -90,90 +91,4 @@ are GPL, so this is, of course, GPL.
 #define DP_OUT(_b_, _o_, _d_)	*( (vu_char *) ((_b_)+(_o_))) = (_d_)
 #define DP_IN_DATA(_b_, _d_)	(_d_) = *( (vu_char *) ((_b_)))
 #define DP_OUT_DATA(_b_, _d_)	*( (vu_char *) ((_b_))) = (_d_)
-
-static void pcnet_reset_8390(void)
-{
-	int i, r;
-
-	PRINTK("nic base is %lx\n", nic_base);
-
-	n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
-	PRINTK("cmd (at %lx) is %x\n", nic_base+ E8390_CMD, n2k_inb(E8390_CMD));
-	n2k_outb(E8390_NODMA+E8390_PAGE1+E8390_STOP, E8390_CMD);
-	PRINTK("cmd (at %lx) is %x\n", nic_base+ E8390_CMD, n2k_inb(E8390_CMD));
-	n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
-	PRINTK("cmd (at %lx) is %x\n", nic_base+ E8390_CMD, n2k_inb(E8390_CMD));
-	n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
-
-	n2k_outb(n2k_inb(PCNET_RESET), PCNET_RESET);
-
-	for (i = 0; i < 100; i++) {
-		if ((r = (n2k_inb(EN0_ISR) & ENISR_RESET)) != 0)
-			break;
-		PRINTK("got %x in reset\n", r);
-		udelay(100);
-	}
-	n2k_outb(ENISR_RESET, EN0_ISR); /* Ack intr. */
-
-	if (i == 100)
-		printf("pcnet_reset_8390() did not complete.\n");
-} /* pcnet_reset_8390 */
-
-int get_prom(u8* mac_addr)
-{
-	u8 prom[32];
-	int i, j;
-	struct {
-		u_char value, offset;
-	} program_seq[] = {
-		{E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD}, /* Select page 0*/
-		{0x48,  EN0_DCFG},		/* Set byte-wide (0x48) access. */
-		{0x00,  EN0_RCNTLO},		/* Clear the count regs. */
-		{0x00,  EN0_RCNTHI},
-		{0x00,  EN0_IMR},		/* Mask completion irq. */
-		{0xFF,  EN0_ISR},
-		{E8390_RXOFF, EN0_RXCR},	/* 0x20  Set to monitor */
-		{E8390_TXOFF, EN0_TXCR},	/* 0x02  and loopback mode. */
-		{32,    EN0_RCNTLO},
-		{0x00,  EN0_RCNTHI},
-		{0x00,  EN0_RSARLO},		/* DMA starting at 0x0000. */
-		{0x00,  EN0_RSARHI},
-		{E8390_RREAD+E8390_START, E8390_CMD},
-	};
-
-	PRINTK ("trying to get MAC via prom reading\n");
-
-	pcnet_reset_8390 ();
-
-	mdelay (10);
-
-	for (i = 0; i < sizeof (program_seq) / sizeof (program_seq[0]); i++)
-		n2k_outb (program_seq[i].value, program_seq[i].offset);
-
-	PRINTK ("PROM:");
-	for (i = 0; i < 32; i++) {
-		prom[i] = n2k_inb (PCNET_DATAPORT);
-		PRINTK (" %02x", prom[i]);
-	}
-	PRINTK ("\n");
-	for (i = 0; i < NR_INFO; i++) {
-		if ((prom[0] == hw_info[i].a0) &&
-		    (prom[2] == hw_info[i].a1) &&
-		    (prom[4] == hw_info[i].a2)) {
-			PRINTK ("matched board %d\n", i);
-			break;
-		}
-	}
-	if ((i < NR_INFO) || ((prom[28] == 0x57) && (prom[30] == 0x57))) {
-		PRINTK ("on exit i is %d/%ld\n", i, NR_INFO);
-		PRINTK ("MAC address is ");
-		for (j = 0; j < 6; j++) {
-			mac_addr[j] = prom[j << 1];
-			PRINTK ("%02x:", mac_addr[i]);
-		}
-		PRINTK ("\n");
-		return (i < NR_INFO) ? i : 0;
-	}
-	return NULL;
-}
 #endif /* __DRIVERS_NE2000_H__ */