MPC512x: use I/O accessors instead of pointer accesses

This commit changes the MPC512x code to use I/O accessor calls (i.e.
out_*() and in_*()) instead of using deprecated pointer accesses.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: John Rigby <jcrigby@gmail.com>

1 files changed, 64 insertions, 49 deletions

diff --git a/drivers/net/mpc512x_fec.c b/drivers/net/mpc512x_fec.c
index 7078c4ef77..54225e1eb1 100644
--- a/drivers/net/mpc512x_fec.c
+++ b/drivers/net/mpc512x_fec.c
@@ -12,6 +12,7 @@
 #include <net.h>
 #include <netdev.h>
 #include <miiphy.h>
+#include <asm/io.h>
 #include "mpc512x_fec.h"
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -66,7 +67,8 @@ static int mpc512x_fec_bd_init (mpc512x_fec_priv *fec)
 	 * Receive BDs init
 	 */
 	for (ix = 0; ix < FEC_RBD_NUM; ix++) {
-		fec->bdBase->rbd[ix].dataPointer = (uint32)&fec->bdBase->recv_frames[ix];
+		fec->bdBase->rbd[ix].dataPointer =
+				(uint32)&fec->bdBase->recv_frames[ix];
 		fec->bdBase->rbd[ix].status = FEC_RBD_EMPTY;
 		fec->bdBase->rbd[ix].dataLength = 0;
 	}
@@ -119,8 +121,9 @@ static void mpc512x_fec_rbd_clean (mpc512x_fec_priv *fec, volatile FEC_RBD * pRb
 
 	/*
 	 * Now, we have an empty RxBD, notify FEC
+	 * Set Descriptor polling active
 	 */
-	fec->eth->r_des_active = 0x01000000;	/* Descriptor polling active */
+	out_be32(&fec->eth->r_des_active, 0x01000000);
 }
 
 /********************************************************************/
@@ -203,18 +206,20 @@ static void mpc512x_fec_set_hwaddr (mpc512x_fec_priv *fec, char *mac)
 	 * Set individual hash table register
 	 */
 	if (crc >= 32) {
-		fec->eth->iaddr1 = (1 << (crc - 32));
-		fec->eth->iaddr2 = 0;
+		out_be32(&fec->eth->iaddr1, (1 << (crc - 32)));
+		out_be32(&fec->eth->iaddr2, 0);
 	} else {
-		fec->eth->iaddr1 = 0;
-		fec->eth->iaddr2 = (1 << crc);
+		out_be32(&fec->eth->iaddr1, 0);
+		out_be32(&fec->eth->iaddr2, (1 << crc));
 	}
 
 	/*
 	 * Set physical address
 	 */
-	fec->eth->paddr1 = (mac[0] << 24) + (mac[1] << 16) + (mac[2] << 8) + mac[3];
-	fec->eth->paddr2 = (mac[4] << 24) + (mac[5] << 16) + 0x8808;
+	out_be32(&fec->eth->paddr1, (mac[0] << 24) + (mac[1] << 16) +
+				    (mac[2] <<  8) + mac[3]);
+	out_be32(&fec->eth->paddr2, (mac[4] << 24) + (mac[5] << 16) +
+				     0x8808);
 }
 
 /********************************************************************/
@@ -227,45 +232,45 @@ static int mpc512x_fec_init (struct eth_device *dev, bd_t * bis)
 #endif
 
 	/* Set interrupt mask register */
-	fec->eth->imask = 0x00000000;
+	out_be32(&fec->eth->imask, 0x00000000);
 
 	/* Clear FEC-Lite interrupt event register(IEVENT) */
-	fec->eth->ievent = 0xffffffff;
+	out_be32(&fec->eth->ievent, 0xffffffff);
 
 	/* Set transmit fifo watermark register(X_WMRK), default = 64 */
-	fec->eth->x_wmrk = 0x0;
+	out_be32(&fec->eth->x_wmrk, 0x0);
 
 	/* Set Opcode/Pause Duration Register */
-	fec->eth->op_pause = 0x00010020;
+	out_be32(&fec->eth->op_pause, 0x00010020);
 
 	/* Frame length=1522; MII mode */
-	fec->eth->r_cntrl = (FEC_MAX_FRAME_LEN << 16) | 0x24;
+	out_be32(&fec->eth->r_cntrl, (FEC_MAX_FRAME_LEN << 16) | 0x24);
 
 	/* Half-duplex, heartbeat disabled */
-	fec->eth->x_cntrl = 0x00000000;
+	out_be32(&fec->eth->x_cntrl, 0x00000000);
 
 	/* Enable MIB counters */
-	fec->eth->mib_control = 0x0;
+	out_be32(&fec->eth->mib_control, 0x0);
 
 	/* Setup recv fifo start and buff size */
-	fec->eth->r_fstart = 0x500;
-	fec->eth->r_buff_size = FEC_BUFFER_SIZE;
+	out_be32(&fec->eth->r_fstart, 0x500);
+	out_be32(&fec->eth->r_buff_size, FEC_BUFFER_SIZE);
 
 	/* Setup BD base addresses */
-	fec->eth->r_des_start = (uint32)fec->bdBase->rbd;
-	fec->eth->x_des_start = (uint32)fec->bdBase->tbd;
+	out_be32(&fec->eth->r_des_start, (uint32)fec->bdBase->rbd);
+	out_be32(&fec->eth->x_des_start, (uint32)fec->bdBase->tbd);
 
 	/* DMA Control */
-	fec->eth->dma_control = 0xc0000000;
+	out_be32(&fec->eth->dma_control, 0xc0000000);
 
 	/* Enable FEC */
-	fec->eth->ecntrl |= 0x00000006;
+	setbits_be32(&fec->eth->ecntrl, 0x00000006);
 
 	/* Initilize addresses and status words of BDs */
 	mpc512x_fec_bd_init (fec);
 
 	 /* Descriptor polling active */
-	fec->eth->r_des_active = 0x01000000;
+	out_be32(&fec->eth->r_des_active, 0x01000000);
 
 #if (DEBUG & 0x1)
 	printf("mpc512x_fec_init... Done \n");
@@ -288,19 +293,20 @@ int mpc512x_fec_init_phy (struct eth_device *dev, bd_t * bis)
 	/*
 	 * Clear FEC-Lite interrupt event register(IEVENT)
 	 */
-	fec->eth->ievent = 0xffffffff;
+	out_be32(&fec->eth->ievent, 0xffffffff);
 
 	/*
 	 * Set interrupt mask register
 	 */
-	fec->eth->imask = 0x00000000;
+	out_be32(&fec->eth->imask, 0x00000000);
 
 	if (fec->xcv_type != SEVENWIRE) {
 		/*
 		 * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock
 		 * and do not drop the Preamble.
 		 */
-		fec->eth->mii_speed = (((gd->ips_clk / 1000000) / 5) + 1) << 1;
+		out_be32(&fec->eth->mii_speed,
+			 (((gd->ips_clk / 1000000) / 5) + 1) << 1);
 
 		/*
 		 * Reset PHY, then delay 300ns
@@ -414,27 +420,28 @@ static void mpc512x_fec_halt (struct eth_device *dev)
 	/*
 	 * mask FEC chip interrupts
 	 */
-	fec->eth->imask = 0;
+	out_be32(&fec->eth->imask, 0);
 
 	/*
 	 * issue graceful stop command to the FEC transmitter if necessary
 	 */
-	fec->eth->x_cntrl |= 0x00000001;
+	setbits_be32(&fec->eth->x_cntrl, 0x00000001);
 
 	/*
 	 * wait for graceful stop to register
 	 */
-	while ((counter--) && (!(fec->eth->ievent & 0x10000000))) ;
+	while ((counter--) && (!(in_be32(&fec->eth->ievent) & 0x10000000)))
+		;
 
 	/*
 	 * Disable the Ethernet Controller
 	 */
-	fec->eth->ecntrl &= 0xfffffffd;
+	clrbits_be32(&fec->eth->ecntrl, 0x00000002);
 
 	/*
 	 * Issue a reset command to the FEC chip
 	 */
-	fec->eth->ecntrl |= 0x1;
+	setbits_be32(&fec->eth->ecntrl, 0x1);
 
 	/*
 	 * wait at least 16 clock cycles
@@ -493,7 +500,7 @@ static int mpc512x_fec_send (struct eth_device *dev, volatile void *eth_data,
 	fec->tbdIndex = (fec->tbdIndex + 1) % FEC_TBD_NUM;
 
 	/* Activate transmit Buffer Descriptor polling */
-	fec->eth->x_des_active = 0x01000000;	/* Descriptor polling active	*/
+	out_be32(&fec->eth->x_des_active, 0x01000000);
 
 #if (DEBUG & 0x8)
 	printf ( "+" );
@@ -536,8 +543,8 @@ static int mpc512x_fec_recv (struct eth_device *dev)
 	/*
 	 * Check if any critical events have happened
 	 */
-	ievent = fec->eth->ievent;
-	fec->eth->ievent = ievent;
+	ievent = in_be32(&fec->eth->ievent);
+	out_be32(&fec->eth->ievent, ievent);
 	if (ievent & 0x20060000) {
 		/* BABT, Rx/Tx FIFO errors */
 		mpc512x_fec_halt (dev);
@@ -546,13 +553,13 @@ static int mpc512x_fec_recv (struct eth_device *dev)
 	}
 	if (ievent & 0x80000000) {
 		/* Heartbeat error */
-		fec->eth->x_cntrl |= 0x00000001;
+		setbits_be32(&fec->eth->x_cntrl, 0x00000001);
 	}
 	if (ievent & 0x10000000) {
 		/* Graceful stop complete */
-		if (fec->eth->x_cntrl & 0x00000001) {
+		if (in_be32(&fec->eth->x_cntrl) & 0x00000001) {
 			mpc512x_fec_halt (dev);
-			fec->eth->x_cntrl &= ~0x00000001;
+			clrbits_be32(&fec->eth->x_cntrl, 0x00000001);;
 			mpc512x_fec_init (dev, NULL);
 		}
 	}
@@ -598,7 +605,8 @@ static int mpc512x_fec_recv (struct eth_device *dev)
 	}
 
 	/* Try to fill Buffer Descriptors */
-	fec->eth->r_des_active = 0x01000000;	/* Descriptor polling active */
+	out_be32(&fec->eth->r_des_active, 0x01000000);
+
 	return frame_length;
 }
 
@@ -651,12 +659,12 @@ int mpc512x_fec_initialize (bd_t * bis)
 	/*
 	 * Set interrupt mask register
 	 */
-	fec->eth->imask = 0x00000000;
+	out_be32(&fec->eth->imask, 0x00000000);
 
 	/*
 	 * Clear FEC-Lite interrupt event register(IEVENT)
 	 */
-	fec->eth->ievent = 0xffffffff;
+	out_be32(&fec->eth->ievent, 0xffffffff);
 
 	/*
 	 * Try to set the mac address now. The fec mac address is
@@ -671,8 +679,8 @@ int mpc512x_fec_initialize (bd_t * bis)
 				tmp = (*end) ? end+1 : end;
 		}
 		mpc512x_fec_set_hwaddr (fec, env_enetaddr);
-		fec->eth->gaddr1 = 0x00000000;
-		fec->eth->gaddr2 = 0x00000000;
+		out_be32(&fec->eth->gaddr1, 0x00000000);
+		out_be32(&fec->eth->gaddr2, 0x00000000);
 	}
 
 	mpc512x_fec_init_phy (dev, bis);
@@ -696,12 +704,16 @@ int fec512x_miiphy_read (char *devname, uint8 phyAddr, uint8 regAddr, uint16 * r
 	reg = regAddr << FEC_MII_DATA_RA_SHIFT;
 	phy = phyAddr << FEC_MII_DATA_PA_SHIFT;
 
-	eth->mii_data = (FEC_MII_DATA_ST | FEC_MII_DATA_OP_RD | FEC_MII_DATA_TA | phy | reg);
+	out_be32(&eth->mii_data, FEC_MII_DATA_ST |
+				 FEC_MII_DATA_OP_RD |
+				 FEC_MII_DATA_TA |
+				 phy | reg);
 
 	/*
 	 * wait for the related interrupt
 	 */
-	while ((timeout--) && (!(eth->ievent & 0x00800000))) ;
+	while ((timeout--) && (!(in_be32(&eth->ievent) & 0x00800000)))
+		;
 
 	if (timeout == 0) {
 #if (DEBUG & 0x2)
@@ -713,12 +725,12 @@ int fec512x_miiphy_read (char *devname, uint8 phyAddr, uint8 regAddr, uint16 * r
 	/*
 	 * clear mii interrupt bit
 	 */
-	eth->ievent = 0x00800000;
+	out_be32(&eth->ievent, 0x00800000);
 
 	/*
 	 * it's now safe to read the PHY's register
 	 */
-	*retVal = (uint16) eth->mii_data;
+	*retVal = (uint16) in_be32(&eth->mii_data);
 
 	return 0;
 }
@@ -734,13 +746,16 @@ int fec512x_miiphy_write (char *devname, uint8 phyAddr, uint8 regAddr, uint16 da
 	reg = regAddr << FEC_MII_DATA_RA_SHIFT;
 	phy = phyAddr << FEC_MII_DATA_PA_SHIFT;
 
-	eth->mii_data = (FEC_MII_DATA_ST | FEC_MII_DATA_OP_WR |
-			FEC_MII_DATA_TA | phy | reg | data);
+	out_be32(&eth->mii_data, FEC_MII_DATA_ST |
+				 FEC_MII_DATA_OP_WR |
+				 FEC_MII_DATA_TA |
+				 phy | reg | data);
 
 	/*
 	 * wait for the MII interrupt
 	 */
-	while ((timeout--) && (!(eth->ievent & 0x00800000))) ;
+	while ((timeout--) && (!(in_be32(&eth->ievent) & 0x00800000)))
+		;
 
 	if (timeout == 0) {
 #if (DEBUG & 0x2)
@@ -752,7 +767,7 @@ int fec512x_miiphy_write (char *devname, uint8 phyAddr, uint8 regAddr, uint16 da
 	/*
 	 * clear MII interrupt bit
 	 */
-	eth->ievent = 0x00800000;
+	out_be32(&eth->ievent, 0x00800000);
 
 	return 0;
 }