diff options
| author | Stefan Roese <sr@denx.de> | 2014-11-13 03:43:39 +0100 |
|---|---|---|
| committer | Tom Rini <trini@ti.com> | 2014-12-04 21:28:31 -0500 |
| commit | fb384c4720ca7496775d6578f184bf628db73456 (patch) | |
| tree | 21e59033d0d2756df6ec75cbfa3963cd0b6c0025 /drivers/mtd | |
| parent | e49631afa074e2cb8ea5baddbbe8b9483a491e32 (diff) | |
| download | talos-obmc-uboot-fb384c4720ca7496775d6578f184bf628db73456.tar.gz talos-obmc-uboot-fb384c4720ca7496775d6578f184bf628db73456.zip | |
mtd: nand: omap_gpmc: Always use ready/busy pin
The functions to detect the state of the ready / busy signal is already
available but only used in the SPL case. Lets use it always, also for the
main U-Boot. As all boards should have this HW connection.
Testing on Siemens Draco (am335x) showed a small perfomance gain by using
this ready pin to detect the NAND chip state. Here the values tested on
Draco with Hynix 4GBit NAND:
Without NAND ready pin:
U-Boot# time nand read 80400000 0 400000
NAND read: device 0 offset 0x0, size 0x400000
4194304 bytes read: OK
time: 2.947 seconds, 2947 ticks
With NAND ready pin:
U-Boot# time nand read 80400000 0 400000
NAND read: device 0 offset 0x0, size 0x400000
4194304 bytes read: OK
time: 2.795 seconds, 2795 ticks
So an increase of approx. 5%.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Tom Rini <trini@ti.com>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Roger Meier <r.meier@siemens.com>
Cc: Samuel Egli <samuel.egli@siemens.com>
Diffstat (limited to 'drivers/mtd')
| -rw-r--r-- | drivers/mtd/nand/omap_gpmc.c | 9 |
1 files changed, 4 insertions, 5 deletions
diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c index 40d670563c..93829a40b6 100644 --- a/drivers/mtd/nand/omap_gpmc.c +++ b/drivers/mtd/nand/omap_gpmc.c @@ -73,14 +73,11 @@ static void omap_nand_hwcontrol(struct mtd_info *mtd, int32_t cmd, writeb(cmd, this->IO_ADDR_W); } -#ifdef CONFIG_SPL_BUILD /* Check wait pin as dev ready indicator */ -static int omap_spl_dev_ready(struct mtd_info *mtd) +static int omap_dev_ready(struct mtd_info *mtd) { return gpmc_cfg->status & (1 << 8); } -#endif - /* * gen_true_ecc - This function will generate true ECC value, which @@ -887,7 +884,9 @@ int board_nand_init(struct nand_chip *nand) nand->read_buf = nand_read_buf16; else nand->read_buf = nand_read_buf; - nand->dev_ready = omap_spl_dev_ready; #endif + + nand->dev_ready = omap_dev_ready; + return 0; } |
