u8500: Separating mmc config parameters from driver

Configuration in vexpress and u8500.v1 is different from what
is needed in u8500.v2.  As such, card configuration specifics need
to reside in the board file rather than the driver.

Signed-off-by: John Rigby <john.rigby@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Tom Rini <trini@ti.com>

1 files changed, 51 insertions, 80 deletions

diff --git a/drivers/mmc/arm_pl180_mmci.c b/drivers/mmc/arm_pl180_mmci.c
index 09d443ee39..db2c7ab75c 100644
--- a/drivers/mmc/arm_pl180_mmci.c
+++ b/drivers/mmc/arm_pl180_mmci.c
@@ -32,14 +32,10 @@
 #include "arm_pl180_mmci.h"
 #include <malloc.h>
 
-struct mmc_host {
-	struct sdi_registers *base;
-};
-
 static int wait_for_command_end(struct mmc *dev, struct mmc_cmd *cmd)
 {
 	u32 hoststatus, statusmask;
-	struct mmc_host *host = dev->priv;
+	struct pl180_mmc_host *host = dev->priv;
 
 	statusmask = SDI_STA_CTIMEOUT | SDI_STA_CCRCFAIL;
 	if ((cmd->resp_type & MMC_RSP_PRESENT))
@@ -53,8 +49,8 @@ static int wait_for_command_end(struct mmc *dev, struct mmc_cmd *cmd)
 
 	writel(statusmask, &host->base->status_clear);
 	if (hoststatus & SDI_STA_CTIMEOUT) {
-		printf("CMD%d time out\n", cmd->cmdidx);
-		return -ETIMEDOUT;
+		debug("CMD%d time out\n", cmd->cmdidx);
+		return TIMEOUT;
 	} else if ((hoststatus & SDI_STA_CCRCFAIL) &&
 		   (cmd->flags & MMC_RSP_CRC)) {
 		printf("CMD%d CRC error\n", cmd->cmdidx);
@@ -80,7 +76,7 @@ static int do_command(struct mmc *dev, struct mmc_cmd *cmd)
 {
 	int result;
 	u32 sdi_cmd = 0;
-	struct mmc_host *host = dev->priv;
+	struct pl180_mmc_host *host = dev->priv;
 
 	sdi_cmd = ((cmd->cmdidx & SDI_CMD_CMDINDEX_MASK) | SDI_CMD_CPSMEN);
 
@@ -112,7 +108,7 @@ static int read_bytes(struct mmc *dev, u32 *dest, u32 blkcount, u32 blksize)
 {
 	u32 *tempbuff = dest;
 	u64 xfercount = blkcount * blksize;
-	struct mmc_host *host = dev->priv;
+	struct pl180_mmc_host *host = dev->priv;
 	u32 status, status_err;
 
 	debug("read_bytes: blkcount=%u blksize=%u\n", blkcount, blksize);
@@ -168,7 +164,7 @@ static int write_bytes(struct mmc *dev, u32 *src, u32 blkcount, u32 blksize)
 	u32 *tempbuff = src;
 	int i;
 	u64 xfercount = blkcount * blksize;
-	struct mmc_host *host = dev->priv;
+	struct pl180_mmc_host *host = dev->priv;
 	u32 status, status_err;
 
 	debug("write_bytes: blkcount=%u blksize=%u\n", blkcount, blksize);
@@ -227,14 +223,19 @@ static int do_data_transfer(struct mmc *dev,
 			    struct mmc_data *data)
 {
 	int error = -ETIMEDOUT;
-	struct mmc_host *host = dev->priv;
+	struct pl180_mmc_host *host = dev->priv;
 	u32 blksz = 0;
 	u32 data_ctrl = 0;
 	u32 data_len = (u32) (data->blocks * data->blocksize);
 
-	blksz = (ffs(data->blocksize) - 1);
-	data_ctrl |= ((blksz << 4) & SDI_DCTRL_DBLKSIZE_MASK);
-	data_ctrl |= SDI_DCTRL_DTEN;
+	if (!host->version2) {
+		blksz = (ffs(data->blocksize) - 1);
+		data_ctrl |= ((blksz << 4) & SDI_DCTRL_DBLKSIZE_MASK);
+	} else {
+		blksz = data->blocksize;
+		data_ctrl |= (blksz << SDI_DCTRL_DBLOCKSIZE_V2_SHIFT);
+	}
+	data_ctrl |= SDI_DCTRL_DTEN | SDI_DCTRL_BUSYMODE;
 
 	writel(SDI_DTIMER_DEFAULT, &host->base->datatimer);
 	writel(data_len, &host->base->datalength);
@@ -257,7 +258,7 @@ static int do_data_transfer(struct mmc *dev,
 
 		writel(data_ctrl, &host->base->datactrl);
 		error = write_bytes(dev, (u32 *)data->src, (u32)data->blocks,
-				    (u32)data->blocksize);
+							(u32)data->blocksize);
 	}
 
 	return error;
@@ -280,17 +281,16 @@ static int host_request(struct mmc *dev,
 /* MMC uses open drain drivers in the enumeration phase */
 static int mmc_host_reset(struct mmc *dev)
 {
-	struct mmc_host *host = dev->priv;
-	u32 sdi_u32 = SDI_PWR_OPD | SDI_PWR_PWRCTRL_ON;
+	struct pl180_mmc_host *host = dev->priv;
 
-	writel(sdi_u32, &host->base->power);
+	writel(host->pwr_init, &host->base->power);
 
 	return 0;
 }
 
 static void host_set_ios(struct mmc *dev)
 {
-	struct mmc_host *host = dev->priv;
+	struct pl180_mmc_host *host = dev->priv;
 	u32 sdi_clkcr;
 
 	sdi_clkcr = readl(&host->base->clock);
@@ -298,15 +298,26 @@ static void host_set_ios(struct mmc *dev)
 	/* Ramp up the clock rate */
 	if (dev->clock) {
 		u32 clkdiv = 0;
+		u32 tmp_clock;
 
-		if (dev->clock >= dev->f_max)
+		if (dev->clock >= dev->f_max) {
+			clkdiv = 0;
 			dev->clock = dev->f_max;
+		} else {
+			clkdiv = (host->clock_in / dev->clock) - 2;
+		}
 
-		clkdiv = ((ARM_MCLK / dev->clock) / 2) - 1;
+		tmp_clock = host->clock_in / (clkdiv + 2);
+		while (tmp_clock > dev->clock) {
+			clkdiv++;
+			tmp_clock = host->clock_in / (clkdiv + 2);
+		}
 
 		if (clkdiv > SDI_CLKCR_CLKDIV_MASK)
 			clkdiv = SDI_CLKCR_CLKDIV_MASK;
 
+		tmp_clock = host->clock_in / (clkdiv + 2);
+		dev->clock = tmp_clock;
 		sdi_clkcr &= ~(SDI_CLKCR_CLKDIV_MASK);
 		sdi_clkcr |= clkdiv;
 	}
@@ -322,8 +333,11 @@ static void host_set_ios(struct mmc *dev)
 		case 4:
 			buswidth |= SDI_CLKCR_WIDBUS_4;
 			break;
+		case 8:
+			buswidth |= SDI_CLKCR_WIDBUS_8;
+			break;
 		default:
-			printf("Invalid bus width\n");
+			printf("Invalid bus width: %d\n", dev->bus_width);
 			break;
 		}
 		sdi_clkcr &= ~(SDI_CLKCR_WIDBUS_MASK);
@@ -334,83 +348,40 @@ static void host_set_ios(struct mmc *dev)
 	udelay(CLK_CHANGE_DELAY);
 }
 
-struct mmc *alloc_mmc_struct(void)
-{
-	struct mmc_host *host = NULL;
-	struct mmc *mmc_device = NULL;
-
-	host = malloc(sizeof(struct mmc_host));
-	if (!host)
-		return NULL;
-
-	mmc_device = malloc(sizeof(struct mmc));
-	if (!mmc_device)
-		goto err;
-
-	mmc_device->priv = host;
-	return mmc_device;
-
-err:
-	free(host);
-	return NULL;
-}
-
 /*
  * mmc_host_init - initialize the mmc controller.
  * Set initial clock and power for mmc slot.
  * Initialize mmc struct and register with mmc framework.
  */
-static int arm_pl180_mmci_host_init(struct mmc *dev)
+int arm_pl180_mmci_init(struct pl180_mmc_host *host)
 {
-	struct mmc_host *host = dev->priv;
+	struct mmc *dev;
 	u32 sdi_u32;
 
-	host->base = (struct sdi_registers *)CONFIG_ARM_PL180_MMCI_BASE;
+	dev = malloc(sizeof(struct mmc));
+	if (!dev)
+		return -ENOMEM;
 
-	/* Initially set power-on, full voltage & MMCI read */
-	sdi_u32 = INIT_PWR;
-	writel(sdi_u32, &host->base->power);
+	memset(dev, 0, sizeof(struct mmc));
+	dev->priv = host;
 
-	/* setting clk freq 505KHz */
-	sdi_u32 = SDI_CLKCR_CLKDIV_INIT | SDI_CLKCR_CLKEN;
-	writel(sdi_u32, &host->base->clock);
+	writel(host->pwr_init, &host->base->power);
+	writel(host->clkdiv_init, &host->base->clock);
 	udelay(CLK_CHANGE_DELAY);
 
 	/* Disable mmc interrupts */
 	sdi_u32 = readl(&host->base->mask0) & ~SDI_MASK0_MASK;
 	writel(sdi_u32, &host->base->mask0);
-
-	sprintf(dev->name, "MMC");
-	dev->clock = ARM_MCLK / (2 * (SDI_CLKCR_CLKDIV_INIT + 1));
+	strncpy(dev->name, host->name, sizeof(dev->name));
 	dev->send_cmd = host_request;
 	dev->set_ios = host_set_ios;
 	dev->init = mmc_host_reset;
 	dev->getcd = NULL;
-	dev->host_caps = 0;
-	dev->voltages = VOLTAGE_WINDOW_MMC;
-	dev->f_min = dev->clock;
-	dev->f_max = CONFIG_ARM_PL180_MMCI_CLOCK_FREQ;
-
-	return 0;
-}
-
-int arm_pl180_mmci_init(void)
-{
-	int error;
-	struct mmc *dev;
-
-	dev = alloc_mmc_struct();
-	if (!dev)
-		return -1;
-
-	error = arm_pl180_mmci_host_init(dev);
-	if (error) {
-		printf("mmci_host_init error - %d\n", error);
-		return -1;
-	}
-
-	dev->b_max = 0;
-
+	dev->host_caps = host->caps;
+	dev->voltages = host->voltages;
+	dev->f_min = host->clock_min;
+	dev->f_max = host->clock_max;
+	dev->b_max = host->b_max;
 	mmc_register(dev);
 	debug("registered mmc interface number is:%d\n", dev->block_dev.dev);