s3c44b0: move i2c driver to drivers/i2c

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

2 files changed, 316 insertions, 0 deletions

diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index 9c74657dad..69cf9a661e 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -31,6 +31,7 @@ COBJS-$(CONFIG_I2C_MXC) += mxc_i2c.o
 COBJS-$(CONFIG_DRIVER_OMAP1510_I2C) += omap1510_i2c.o
 COBJS-$(CONFIG_DRIVER_OMAP24XX_I2C) += omap24xx_i2c.o
 COBJS-$(CONFIG_DRIVER_OMAP34XX_I2C) += omap24xx_i2c.o
+COBJS-$(CONFIG_S3C44B0_I2C) += s3c44b0_i2c.o
 COBJS-$(CONFIG_SOFT_I2C) += soft_i2c.o
 COBJS-$(CONFIG_TSI108_I2C) += tsi108_i2c.o
 
diff --git a/drivers/i2c/s3c44b0_i2c.c b/drivers/i2c/s3c44b0_i2c.c
new file mode 100644
index 0000000000..b4d904b2eb
--- /dev/null
+++ b/drivers/i2c/s3c44b0_i2c.c
@@ -0,0 +1,315 @@
+/*
+ * (C) Copyright 2004
+ * DAVE Srl
+ * http://www.dave-tech.it
+ * http://www.wawnet.biz
+ * mailto:info@wawnet.biz
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/hardware.h>
+
+/*
+ * Initialization, must be called once on start up, may be called
+ * repeatedly to change the speed and slave addresses.
+ */
+void i2c_init(int speed, int slaveaddr)
+{
+	/*
+		setting up I2C support
+	*/
+	unsigned int save_F,save_PF,rIICCON,rPCONA,rPDATA,rPCONF,rPUPF;
+
+	save_F = PCONF;
+	save_PF = PUPF;
+
+	rPCONF = ((save_F & ~(0xF))| 0xa);
+	rPUPF = (save_PF | 0x3);
+	PCONF = rPCONF; /*PF0:IICSCL, PF1:IICSDA*/
+	PUPF = rPUPF; /* Disable pull-up */
+
+	/* Configuring pin for WC pin of EEprom */
+	rPCONA = PCONA;
+	rPCONA &= ~(1<<9);
+	PCONA = rPCONA;
+
+	rPDATA = PDATA;
+	rPDATA &= ~(1<<9);
+	PDATA = rPDATA;
+
+	/*
+		Enable ACK, IICCLK=MCLK/16, enable interrupt
+		75MHz/16/(12+1) = 390625 Hz
+	*/
+	rIICCON=(1<<7)|(0<<6)|(1<<5)|(0xC);
+	IICCON = rIICCON;
+
+	IICADD = slaveaddr;
+}
+
+/*
+ * Probe the given I2C chip address.  Returns 0 if a chip responded,
+ * not 0 on failure.
+ */
+int i2c_probe(uchar chip)
+{
+	/*
+		not implemented
+	*/
+
+	printf("i2c_probe chip %d\n", (int) chip);
+	return -1;
+}
+
+/*
+ * Read/Write interface:
+ *   chip:    I2C chip address, range 0..127
+ *   addr:    Memory (register) address within the chip
+ *   alen:    Number of bytes to use for addr (typically 1, 2 for larger
+ *              memories, 0 for register type devices with only one
+ *              register)
+ *   buffer:  Where to read/write the data
+ *   len:     How many bytes to read/write
+ *
+ *   Returns: 0 on success, not 0 on failure
+ */
+
+#define S3C44B0X_rIIC_INTPEND               (1<<4)
+#define S3C44B0X_rIIC_LAST_RECEIV_BIT       (1<<0)
+#define S3C44B0X_rIIC_INTERRUPT_ENABLE      (1<<5)
+#define S3C44B0_IIC_TIMEOUT 100
+
+int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
+{
+
+	int k, j, temp;
+	u32 rIICSTAT;
+
+	/*
+		send the device offset
+	*/
+
+	rIICSTAT = 0xD0;
+	IICSTAT = rIICSTAT;
+
+	IICDS = chip;	/* this is a write operation... */
+
+	rIICSTAT |= (1<<5);
+	IICSTAT = rIICSTAT;
+
+	for(k=0; k<S3C44B0_IIC_TIMEOUT; k++) {
+		temp = IICCON;
+		if( (temp & S3C44B0X_rIIC_INTPEND) == S3C44B0X_rIIC_INTPEND)
+		break;
+		udelay(2000);
+	}
+	if (k==S3C44B0_IIC_TIMEOUT)
+		return -1;
+
+	/* wait and check ACK */
+	temp = IICSTAT;
+	if ((temp & S3C44B0X_rIIC_LAST_RECEIV_BIT) == S3C44B0X_rIIC_LAST_RECEIV_BIT )
+		return -1;
+
+	IICDS = addr;
+	IICCON = IICCON & ~(S3C44B0X_rIIC_INTPEND);
+
+	/* wait and check ACK */
+	for(k=0; k<S3C44B0_IIC_TIMEOUT; k++) {
+		temp = IICCON;
+		if( (temp & S3C44B0X_rIIC_INTPEND) == S3C44B0X_rIIC_INTPEND)
+		break;
+		udelay(2000);
+	}
+	if (k==S3C44B0_IIC_TIMEOUT)
+		return -1;
+
+	temp = IICSTAT;
+	if ((temp & S3C44B0X_rIIC_LAST_RECEIV_BIT) == S3C44B0X_rIIC_LAST_RECEIV_BIT )
+		return -1;
+
+	/*
+		now we can start with the read operation...
+	*/
+
+	IICDS = chip | 0x01;	/* this is a read operation... */
+
+	rIICSTAT = 0x90; /*master recv*/
+	rIICSTAT |= (1<<5);
+	IICSTAT = rIICSTAT;
+
+	IICCON = IICCON & ~(S3C44B0X_rIIC_INTPEND);
+
+	/* wait and check ACK */
+	for(k=0; k<S3C44B0_IIC_TIMEOUT; k++) {
+		temp = IICCON;
+		if( (temp & S3C44B0X_rIIC_INTPEND) == S3C44B0X_rIIC_INTPEND)
+		break;
+		udelay(2000);
+	}
+	if (k==S3C44B0_IIC_TIMEOUT)
+		return -1;
+
+	temp = IICSTAT;
+	if ((temp & S3C44B0X_rIIC_LAST_RECEIV_BIT) == S3C44B0X_rIIC_LAST_RECEIV_BIT )
+		return -1;
+
+	for (j=0; j<len-1; j++) {
+
+	/*clear pending bit to resume */
+
+	temp = IICCON & ~(S3C44B0X_rIIC_INTPEND);
+	IICCON = temp;
+
+	/* wait and check ACK */
+	for(k=0; k<S3C44B0_IIC_TIMEOUT; k++) {
+		temp = IICCON;
+		if( (temp & S3C44B0X_rIIC_INTPEND) == S3C44B0X_rIIC_INTPEND)
+		break;
+		udelay(2000);
+	}
+	if (k==S3C44B0_IIC_TIMEOUT)
+		return -1;
+
+
+		buffer[j] = IICDS; /*save readed data*/
+
+    } /*end for(j)*/
+
+	/*
+		reading the last data
+		unset ACK generation
+	*/
+	temp = IICCON & ~(S3C44B0X_rIIC_INTPEND | (1<<7));
+	IICCON = temp;
+
+	/* wait but NOT check ACK */
+	for(k=0; k<S3C44B0_IIC_TIMEOUT; k++) {
+		temp = IICCON;
+		if( (temp & S3C44B0X_rIIC_INTPEND) == S3C44B0X_rIIC_INTPEND)
+		break;
+		udelay(2000);
+	}
+	if (k==S3C44B0_IIC_TIMEOUT)
+		return -1;
+
+	buffer[j] = IICDS; /*save readed data*/
+
+	rIICSTAT = 0x90; /*master recv*/
+
+	/* Write operation Terminate sending STOP */
+	IICSTAT = rIICSTAT;
+	/*Clear Int Pending Bit to RESUME*/
+	temp = IICCON;
+	IICCON = temp & (~S3C44B0X_rIIC_INTPEND);
+
+	IICCON = IICCON | (1<<7);	/*restore ACK generation*/
+
+	return 0;
+}
+
+int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
+{
+	int j, k;
+	u32 rIICSTAT, temp;
+
+
+	/*
+		send the device offset
+	*/
+
+	rIICSTAT = 0xD0;
+	IICSTAT = rIICSTAT;
+
+	IICDS = chip;	/* this is a write operation... */
+
+	rIICSTAT |= (1<<5);
+	IICSTAT = rIICSTAT;
+
+	IICCON = IICCON & ~(S3C44B0X_rIIC_INTPEND);
+
+	/* wait and check ACK */
+	for(k=0; k<S3C44B0_IIC_TIMEOUT; k++) {
+		temp = IICCON;
+		if( (temp & S3C44B0X_rIIC_INTPEND) == S3C44B0X_rIIC_INTPEND)
+		break;
+		udelay(2000);
+	}
+	if (k==S3C44B0_IIC_TIMEOUT)
+		return -1;
+
+	temp = IICSTAT;
+	if ((temp & S3C44B0X_rIIC_LAST_RECEIV_BIT) == S3C44B0X_rIIC_LAST_RECEIV_BIT )
+		return -1;
+
+	IICDS = addr;
+	IICCON = IICCON & ~(S3C44B0X_rIIC_INTPEND);
+
+	/* wait and check ACK */
+	for(k=0; k<S3C44B0_IIC_TIMEOUT; k++) {
+		temp = IICCON;
+		if( (temp & S3C44B0X_rIIC_INTPEND) == S3C44B0X_rIIC_INTPEND)
+		break;
+		udelay(2000);
+	}
+	if (k==S3C44B0_IIC_TIMEOUT)
+	  return -1;
+
+	temp = IICSTAT;
+	if ((temp & S3C44B0X_rIIC_LAST_RECEIV_BIT) == S3C44B0X_rIIC_LAST_RECEIV_BIT )
+		return -1;
+
+	/*
+		now we can start with the read write operation
+	*/
+	for (j=0; j<len; j++) {
+
+		IICDS = buffer[j]; /*prerare data to write*/
+
+		/*clear pending bit to resume*/
+
+		temp = IICCON & ~(S3C44B0X_rIIC_INTPEND);
+		IICCON = temp;
+
+		/* wait but NOT check ACK */
+		for(k=0; k<S3C44B0_IIC_TIMEOUT; k++) {
+			temp = IICCON;
+			if( (temp & S3C44B0X_rIIC_INTPEND) == S3C44B0X_rIIC_INTPEND)
+			break;
+
+			udelay(2000);
+		}
+
+		if (k==S3C44B0_IIC_TIMEOUT)
+			return -1;
+
+	} /* end for(j) */
+
+	/* sending stop to terminate */
+	rIICSTAT = 0xD0;  /*master send*/
+	IICSTAT = rIICSTAT;
+	/*Clear Int Pending Bit to RESUME*/
+	temp = IICCON;
+	IICCON = temp & (~S3C44B0X_rIIC_INTPEND);
+
+	return 0;
+}