drivers: add the support for Freescale SATA controller

Add the Freescale on-chip SATA controller driver to u-boot,
The SATA controller is used on the 837x and 8315 targets,
The driver can be used to load kernel, fs and dtb.

The features list:
- 1.5/3 Gbps link speed
- LBA48, LBA28 support
- DMA and FPDMA support
- Two ports support

Signed-off-by: Dave Liu <daveliu@freescale.com>

1 files changed, 374 insertions, 0 deletions

diff --git a/drivers/block/fsl_sata.h b/drivers/block/fsl_sata.h
new file mode 100644
index 0000000000..874c0dc740
--- /dev/null
+++ b/drivers/block/fsl_sata.h
@@ -0,0 +1,374 @@
+/*
+ * Copyright (C) 2007-2008 Freescale Semiconductor, Inc.
+ *		Dave Liu <daveliu@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __FSL_SATA_H__
+#define __FSL_SATA_H__
+
+#define SATA_HC_MAX_NUM		4 /* Max host controller numbers */
+#define SATA_HC_MAX_CMD		16 /* Max command queue depth per host controller */
+#define SATA_HC_MAX_PORT	16 /* Max port number per host controller */
+
+/*
+* SATA Host Controller Registers
+*/
+typedef struct fsl_sata_reg {
+	/* SATA command registers */
+	u32 cqr;		/* Command queue register */
+	u8 res1[0x4];
+	u32 car;		/* Command active register */
+	u8 res2[0x4];
+	u32 ccr;		/* Command completed register */
+	u8 res3[0x4];
+	u32 cer;		/* Command error register */
+	u8 res4[0x4];
+	u32 der;		/* Device error register */
+	u32 chba;		/* Command header base address */
+	u32 hstatus;		/* Host status register */
+	u32 hcontrol;		/* Host control register */
+	u32 cqpmp;		/* Port number queue register */
+	u32 sig;		/* Signature register */
+	u32 icc;		/* Interrupt coalescing control register */
+	u8 res5[0xc4];
+
+	/* SATA supperset registers */
+	u32 sstatus;		/* SATA interface status register */
+	u32 serror;		/* SATA interface error register */
+	u32 scontrol;		/* SATA interface control register */
+	u32 snotification;	/* SATA interface notification register */
+	u8 res6[0x30];
+
+	/* SATA control status registers */
+	u32 transcfg;		/* Transport layer configuration */
+	u32 transstatus;	/* Transport layer status */
+	u32 linkcfg;		/* Link layer configuration */
+	u32 linkcfg1;		/* Link layer configuration1 */
+	u32 linkcfg2;		/* Link layer configuration2 */
+	u32 linkstatus;		/* Link layer status */
+	u32 linkstatus1;	/* Link layer status1 */
+	u32 phyctrlcfg;		/* PHY control configuration */
+	u8 res7[0x2b0];
+
+	/* SATA system control registers */
+	u32 syspr;		/* System priority register - big endian */
+	u8 res8[0xbec];
+} __attribute__ ((packed)) fsl_sata_reg_t;
+
+/* HStatus register
+*/
+#define HSTATUS_ONOFF			0x80000000 /* Online/offline status */
+#define HSTATUS_FORCE_OFFLINE		0x40000000 /* In process going offline */
+#define HSTATUS_BIST_ERR		0x20000000
+
+/* Fatal error */
+#define HSTATUS_MASTER_ERR		0x00004000
+#define HSTATUS_DATA_UNDERRUN		0x00002000
+#define HSTATUS_DATA_OVERRUN		0x00001000
+#define HSTATUS_CRC_ERR_TX		0x00000800
+#define HSTATUS_CRC_ERR_RX		0x00000400
+#define HSTATUS_FIFO_OVERFLOW_TX	0x00000200
+#define HSTATUS_FIFO_OVERFLOW_RX	0x00000100
+#define HSTATUS_FATAL_ERR_ALL		(HSTATUS_MASTER_ERR | \
+					HSTATUS_DATA_UNDERRUN | \
+					HSTATUS_DATA_OVERRUN | \
+					HSTATUS_CRC_ERR_TX | \
+					HSTATUS_CRC_ERR_RX | \
+					HSTATUS_FIFO_OVERFLOW_TX | \
+					HSTATUS_FIFO_OVERFLOW_RX)
+/* Interrupt status */
+#define HSTATUS_FATAL_ERR		0x00000020
+#define HSTATUS_PHY_RDY			0x00000010
+#define HSTATUS_SIGNATURE		0x00000008
+#define HSTATUS_SNOTIFY			0x00000004
+#define HSTATUS_DEVICE_ERR		0x00000002
+#define HSTATUS_CMD_COMPLETE		0x00000001
+
+/* HControl register
+*/
+#define HCONTROL_ONOFF			0x80000000 /* Online or offline request */
+#define HCONTROL_FORCE_OFFLINE		0x40000000 /* Force offline request */
+#define HCONTROL_HDR_SNOOP		0x00000400 /* Command header snoop */
+#define HCONTROL_PMP_ATTACHED		0x00000200 /* Port multiplier attached */
+
+/* Interrupt enable */
+#define HCONTROL_FATAL_ERR		0x00000020
+#define HCONTROL_PHY_RDY		0x00000010
+#define HCONTROL_SIGNATURE		0x00000008
+#define HCONTROL_SNOTIFY		0x00000004
+#define HCONTROL_DEVICE_ERR		0x00000002
+#define HCONTROL_CMD_COMPLETE		0x00000001
+
+#define HCONTROL_INT_EN_ALL		(HCONTROL_FATAL_ERR | \
+					HCONTROL_PHY_RDY | \
+					HCONTROL_SIGNATURE | \
+					HCONTROL_SNOTIFY | \
+					HCONTROL_DEVICE_ERR | \
+					HCONTROL_CMD_COMPLETE)
+
+/* SStatus register
+*/
+#define SSTATUS_IPM_MASK		0x00000780
+#define SSTATUS_IPM_NOPRESENT		0x00000000
+#define SSTATUS_IPM_ACTIVE		0x00000080
+#define SSTATUS_IPM_PATIAL		0x00000100
+#define SSTATUS_IPM_SLUMBER		0x00000300
+
+#define SSTATUS_SPD_MASK		0x000000f0
+#define SSTATUS_SPD_GEN1		0x00000010
+#define SSTATUS_SPD_GEN2		0x00000020
+
+#define SSTATUS_DET_MASK		0x0000000f
+#define SSTATUS_DET_NODEVICE		0x00000000
+#define SSTATUS_DET_DISCONNECT		0x00000001
+#define SSTATUS_DET_CONNECT		0x00000003
+#define SSTATUS_DET_PHY_OFFLINE		0x00000004
+
+/* SControl register
+*/
+#define SCONTROL_SPM_MASK		0x0000f000
+#define SCONTROL_SPM_GO_PARTIAL		0x00001000
+#define SCONTROL_SPM_GO_SLUMBER		0x00002000
+#define SCONTROL_SPM_GO_ACTIVE		0x00004000
+
+#define SCONTROL_IPM_MASK		0x00000f00
+#define SCONTROL_IPM_NO_RESTRICT	0x00000000
+#define SCONTROL_IPM_PARTIAL		0x00000100
+#define SCONTROL_IPM_SLUMBER		0x00000200
+#define SCONTROL_IPM_PART_SLUM		0x00000300
+
+#define SCONTROL_SPD_MASK		0x000000f0
+#define SCONTROL_SPD_NO_RESTRICT	0x00000000
+#define SCONTROL_SPD_GEN1		0x00000010
+#define SCONTROL_SPD_GEN2		0x00000020
+
+#define SCONTROL_DET_MASK		0x0000000f
+#define SCONTROL_DET_HRESET		0x00000001
+#define SCONTROL_DET_DISABLE		0x00000004
+
+/* TransCfg register
+*/
+#define TRANSCFG_DFIS_SIZE_SHIFT	16
+#define TRANSCFG_RX_WATER_MARK_MASK	0x0000001f
+
+/* PhyCtrlCfg register
+*/
+#define PHYCTRLCFG_FPRFTI_MASK		0x00000018
+#define PHYCTRLCFG_LOOPBACK_MASK	0x0000000e
+
+/*
+* Command Header Entry
+*/
+typedef struct cmd_hdr_entry {
+	u32 cda;		/* Command Descriptor Address, 4 bytes aligned */
+	u32 prde_fis_len;	/* Number of PRD entries and FIS length */
+	u32 ttl;		/* Total transfer length */
+	u32 attribute;		/* the attribute of command */
+} __attribute__ ((packed)) cmd_hdr_entry_t;
+
+#define SATA_HC_CMD_HDR_ENTRY_SIZE	sizeof(struct cmd_hdr_entry)
+
+/* cda
+*/
+#define CMD_HDR_CDA_ALIGN	4
+
+/* prde_fis_len
+*/
+#define CMD_HDR_PRD_ENTRY_SHIFT	16
+#define CMD_HDR_PRD_ENTRY_MASK	0x003f0000
+#define CMD_HDR_FIS_LEN_SHIFT	2
+
+/* attribute
+*/
+#define CMD_HDR_ATTR_RES	0x00000800 /* Reserved bit, should be 1 */
+#define CMD_HDR_ATTR_VBIST	0x00000400 /* Vendor BIST */
+#define CMD_HDR_ATTR_SNOOP	0x00000200 /* Snoop enable for all descriptor */
+#define CMD_HDR_ATTR_FPDMA	0x00000100 /* FPDMA queued command */
+#define CMD_HDR_ATTR_RESET	0x00000080 /* Reset - a SRST or device reset */
+#define CMD_HDR_ATTR_BIST	0x00000040 /* BIST - require the host to enter BIST mode */
+#define CMD_HDR_ATTR_ATAPI	0x00000020 /* ATAPI command */
+#define CMD_HDR_ATTR_TAG	0x0000001f /* TAG mask */
+
+/* command type
+*/
+enum cmd_type {
+	CMD_VENDOR_BIST,
+	CMD_BIST,
+	CMD_RESET,	/* SRST or device reset */
+	CMD_ATAPI,
+	CMD_NCQ,
+	CMD_ATA,	/* None of all above */
+};
+
+/*
+* Command Header Table
+*/
+typedef struct cmd_hdr_tbl {
+	cmd_hdr_entry_t cmd_slot[SATA_HC_MAX_CMD];
+} __attribute__ ((packed)) cmd_hdr_tbl_t;
+
+#define SATA_HC_CMD_HDR_TBL_SIZE	sizeof(struct cmd_hdr_tbl)
+#define SATA_HC_CMD_HDR_TBL_ALIGN	4
+
+/*
+* PRD entry - Physical Region Descriptor entry
+*/
+typedef struct prd_entry {
+	u32 dba;	/* Data base address, 4 bytes aligned */
+	u32 res1;
+	u32 res2;
+	u32 ext_c_ddc;	/* Indirect PRD flags, snoop and data word count */
+} __attribute__ ((packed)) prd_entry_t;
+
+#define SATA_HC_CMD_DESC_PRD_SIZE	sizeof(struct prd_entry)
+
+/* dba
+*/
+#define PRD_ENTRY_DBA_ALIGN	4
+
+/* ext_c_ddc
+*/
+#define PRD_ENTRY_EXT		0x80000000 /* extension flag or called indirect descriptor flag */
+#define PRD_ENTRY_DATA_SNOOP	0x00400000 /* Snoop enable for all data associated with the PRD entry */
+#define PRD_ENTRY_LEN_MASK	0x003fffff /* Data word count */
+
+#define PRD_ENTRY_MAX_XFER_SZ	(PRD_ENTRY_LEN_MASK + 1)
+
+/*
+ * This SATA host controller supports a max of 16 direct PRD entries, but if use
+ * chained indirect PRD entries, then the contollers supports upto a max of 63
+ * entries including direct and indirect PRD entries.
+ * The PRDT is an array of 63 PRD entries contigiously, but the PRD entries#15
+ * will be setup as an indirect descriptor, pointing to it's next (contigious)
+ * PRD entries#16.
+ */
+#define SATA_HC_MAX_PRD		63 /* Max PRD entry numbers per command */
+#define SATA_HC_MAX_PRD_DIRECT	16 /* Direct PRDT entries */
+#define SATA_HC_MAX_PRD_USABLE	(SATA_HC_MAX_PRD - 1)
+#define SATA_HC_MAX_XFER_LEN	0x4000000
+
+/*
+* PRDT - Physical Region Descriptor Table
+*/
+typedef struct prdt {
+	prd_entry_t prdt[SATA_HC_MAX_PRD];
+} __attribute__ ((packed)) prdt_t;
+
+/*
+* Command Descriptor
+*/
+#define SATA_HC_CMD_DESC_CFIS_SIZE	32 /* bytes */
+#define SATA_HC_CMD_DESC_SFIS_SIZE	32 /* bytes */
+#define SATA_HC_CMD_DESC_ACMD_SIZE	16 /* bytes */
+#define SATA_HC_CMD_DESC_RES		16 /* bytes */
+
+typedef struct cmd_desc {
+	u8 cfis[SATA_HC_CMD_DESC_CFIS_SIZE];
+	u8 sfis[SATA_HC_CMD_DESC_SFIS_SIZE];
+	u8 acmd[SATA_HC_CMD_DESC_ACMD_SIZE];
+	u8 res[SATA_HC_CMD_DESC_RES];
+	prd_entry_t prdt[SATA_HC_MAX_PRD];
+} __attribute__ ((packed)) cmd_desc_t;
+
+#define SATA_HC_CMD_DESC_SIZE		sizeof(struct cmd_desc)
+#define SATA_HC_CMD_DESC_ALIGN		4
+
+/*
+* CFIS - Command FIS, which is H2D register FIS, the struct defination
+* of Non-Queued command is different than NCQ command. see them is sata2.h
+*/
+typedef struct cfis {
+	u8 fis_type;
+	u8 pm_port_c;
+	u8 command;
+	u8 features;
+	u8 lba_low;
+	u8 lba_mid;
+	u8 lba_high;
+	u8 device;
+	u8 lba_low_exp;
+	u8 lba_mid_exp;
+	u8 lba_high_exp;
+	u8 features_exp;
+	u8 sector_count;
+	u8 sector_count_exp;
+	u8 res1;
+	u8 control;
+	u8 res2[4];
+} __attribute__ ((packed)) cfis_t;
+
+/*
+* SFIS - Status FIS, which is D2H register FIS.
+*/
+typedef struct sfis {
+	u8 fis_type;
+	u8 pm_port_i;
+	u8 status;
+	u8 error;
+	u8 lba_low;
+	u8 lba_mid;
+	u8 lba_high;
+	u8 device;
+	u8 lba_low_exp;
+	u8 lba_mid_exp;
+	u8 lba_high_exp;
+	u8 res1;
+	u8 sector_count;
+	u8 sector_count_exp;
+	u8 res2[2];
+	u8 res3[4];
+} __attribute__ ((packed)) sfis_t;
+
+/*
+ * SATA device driver info
+ */
+typedef struct fsl_sata_info {
+	u32	sata_reg_base;
+	u32	flags;
+} fsl_sata_info_t;
+
+#define FLAGS_DMA	0x00000000
+#define FLAGS_FPDMA	0x00000001
+
+/*
+ * SATA device driver struct
+ */
+typedef struct fsl_sata {
+	char		name[12];
+	fsl_sata_reg_t	*reg_base;		/* the base address of controller register */
+	void		*cmd_hdr_tbl_offset;	/* alloc address of command header table */
+	cmd_hdr_tbl_t	*cmd_hdr;		/* aligned address of command header table */
+	void		*cmd_desc_offset;	/* alloc address of command descriptor */
+	cmd_desc_t	*cmd_desc;		/* aligned address of command descriptor */
+	int		link;			/* PHY link status */
+	/* device attribute */
+	int		ata_device_type;	/* device type */
+	int		lba48;
+	int		queue_depth;		/* Max NCQ queue depth */
+	u16		pio;
+	u16		mwdma;
+	u16		udma;
+	int		wcache;
+	int		flush;
+	int		flush_ext;
+} fsl_sata_t;
+
+#define READ_CMD	0
+#define WRITE_CMD	1
+
+#endif /* __FSL_SATA_H__ */