Merge branch 'master' of git://git.denx.de/u-boot-tegra

2 files changed, 482 insertions, 0 deletions

diff --git a/doc/device-tree-bindings/gpu/nvidia,tegra20-host1x.txt b/doc/device-tree-bindings/gpu/nvidia,tegra20-host1x.txt
new file mode 100644
index 0000000000..b48f4ef31d
--- /dev/null
+++ b/doc/device-tree-bindings/gpu/nvidia,tegra20-host1x.txt
@@ -0,0 +1,372 @@
+NVIDIA Tegra host1x
+
+Required properties:
+- compatible: "nvidia,tegra<chip>-host1x"
+- reg: Physical base address and length of the controller's registers.
+- interrupts: The interrupt outputs from the controller.
+- #address-cells: The number of cells used to represent physical base addresses
+  in the host1x address space. Should be 1.
+- #size-cells: The number of cells used to represent the size of an address
+  range in the host1x address space. Should be 1.
+- ranges: The mapping of the host1x address space to the CPU address space.
+- clocks: Must contain one entry, for the module clock.
+  See ../clocks/clock-bindings.txt for details.
+- resets: Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+  - host1x
+
+The host1x top-level node defines a number of children, each representing one
+of the following host1x client modules:
+
+- mpe: video encoder
+
+  Required properties:
+  - compatible: "nvidia,tegra<chip>-mpe"
+  - reg: Physical base address and length of the controller's registers.
+  - interrupts: The interrupt outputs from the controller.
+  - clocks: Must contain one entry, for the module clock.
+    See ../clocks/clock-bindings.txt for details.
+  - resets: Must contain an entry for each entry in reset-names.
+    See ../reset/reset.txt for details.
+  - reset-names: Must include the following entries:
+    - mpe
+
+- vi: video input
+
+  Required properties:
+  - compatible: "nvidia,tegra<chip>-vi"
+  - reg: Physical base address and length of the controller's registers.
+  - interrupts: The interrupt outputs from the controller.
+  - clocks: Must contain one entry, for the module clock.
+    See ../clocks/clock-bindings.txt for details.
+  - resets: Must contain an entry for each entry in reset-names.
+    See ../reset/reset.txt for details.
+  - reset-names: Must include the following entries:
+    - vi
+
+- epp: encoder pre-processor
+
+  Required properties:
+  - compatible: "nvidia,tegra<chip>-epp"
+  - reg: Physical base address and length of the controller's registers.
+  - interrupts: The interrupt outputs from the controller.
+  - clocks: Must contain one entry, for the module clock.
+    See ../clocks/clock-bindings.txt for details.
+  - resets: Must contain an entry for each entry in reset-names.
+    See ../reset/reset.txt for details.
+  - reset-names: Must include the following entries:
+    - epp
+
+- isp: image signal processor
+
+  Required properties:
+  - compatible: "nvidia,tegra<chip>-isp"
+  - reg: Physical base address and length of the controller's registers.
+  - interrupts: The interrupt outputs from the controller.
+  - clocks: Must contain one entry, for the module clock.
+    See ../clocks/clock-bindings.txt for details.
+  - resets: Must contain an entry for each entry in reset-names.
+    See ../reset/reset.txt for details.
+  - reset-names: Must include the following entries:
+    - isp
+
+- gr2d: 2D graphics engine
+
+  Required properties:
+  - compatible: "nvidia,tegra<chip>-gr2d"
+  - reg: Physical base address and length of the controller's registers.
+  - interrupts: The interrupt outputs from the controller.
+  - clocks: Must contain one entry, for the module clock.
+    See ../clocks/clock-bindings.txt for details.
+  - resets: Must contain an entry for each entry in reset-names.
+    See ../reset/reset.txt for details.
+  - reset-names: Must include the following entries:
+    - 2d
+
+- gr3d: 3D graphics engine
+
+  Required properties:
+  - compatible: "nvidia,tegra<chip>-gr3d"
+  - reg: Physical base address and length of the controller's registers.
+  - clocks: Must contain an entry for each entry in clock-names.
+    See ../clocks/clock-bindings.txt for details.
+  - clock-names: Must include the following entries:
+    (This property may be omitted if the only clock in the list is "3d")
+    - 3d
+      This MUST be the first entry.
+    - 3d2 (Only required on SoCs with two 3D clocks)
+  - resets: Must contain an entry for each entry in reset-names.
+    See ../reset/reset.txt for details.
+  - reset-names: Must include the following entries:
+    - 3d
+    - 3d2 (Only required on SoCs with two 3D clocks)
+
+- dc: display controller
+
+  Required properties:
+  - compatible: "nvidia,tegra<chip>-dc"
+  - reg: Physical base address and length of the controller's registers.
+  - interrupts: The interrupt outputs from the controller.
+  - clocks: Must contain an entry for each entry in clock-names.
+    See ../clocks/clock-bindings.txt for details.
+  - clock-names: Must include the following entries:
+    - dc
+      This MUST be the first entry.
+    - parent
+  - resets: Must contain an entry for each entry in reset-names.
+    See ../reset/reset.txt for details.
+  - reset-names: Must include the following entries:
+    - dc
+  - nvidia,head: The number of the display controller head. This is used to
+    setup the various types of output to receive video data from the given
+    head.
+
+  Each display controller node has a child node, named "rgb", that represents
+  the RGB output associated with the controller. It can take the following
+  optional properties:
+  - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
+  - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
+  - nvidia,edid: supplies a binary EDID blob
+  - nvidia,panel: phandle of a display panel
+
+- hdmi: High Definition Multimedia Interface
+
+  Required properties:
+  - compatible: "nvidia,tegra<chip>-hdmi"
+  - reg: Physical base address and length of the controller's registers.
+  - interrupts: The interrupt outputs from the controller.
+  - hdmi-supply: supply for the +5V HDMI connector pin
+  - vdd-supply: regulator for supply voltage
+  - pll-supply: regulator for PLL
+  - clocks: Must contain an entry for each entry in clock-names.
+    See ../clocks/clock-bindings.txt for details.
+  - clock-names: Must include the following entries:
+    - hdmi
+      This MUST be the first entry.
+    - parent
+  - resets: Must contain an entry for each entry in reset-names.
+    See ../reset/reset.txt for details.
+  - reset-names: Must include the following entries:
+    - hdmi
+
+  Optional properties:
+  - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
+  - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
+  - nvidia,edid: supplies a binary EDID blob
+  - nvidia,panel: phandle of a display panel
+
+- tvo: TV encoder output
+
+  Required properties:
+  - compatible: "nvidia,tegra<chip>-tvo"
+  - reg: Physical base address and length of the controller's registers.
+  - interrupts: The interrupt outputs from the controller.
+  - clocks: Must contain one entry, for the module clock.
+    See ../clocks/clock-bindings.txt for details.
+
+- dsi: display serial interface
+
+  Required properties:
+  - compatible: "nvidia,tegra<chip>-dsi"
+  - reg: Physical base address and length of the controller's registers.
+  - clocks: Must contain an entry for each entry in clock-names.
+    See ../clocks/clock-bindings.txt for details.
+  - clock-names: Must include the following entries:
+    - dsi
+      This MUST be the first entry.
+    - lp
+    - parent
+  - resets: Must contain an entry for each entry in reset-names.
+    See ../reset/reset.txt for details.
+  - reset-names: Must include the following entries:
+    - dsi
+  - avdd-dsi-supply: phandle of a supply that powers the DSI controller
+  - nvidia,mipi-calibrate: Should contain a phandle and a specifier specifying
+    which pads are used by this DSI output and need to be calibrated. See also
+    ../mipi/nvidia,tegra114-mipi.txt.
+
+  Optional properties:
+  - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
+  - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
+  - nvidia,edid: supplies a binary EDID blob
+  - nvidia,panel: phandle of a display panel
+
+- sor: serial output resource
+
+  Required properties:
+  - compatible: "nvidia,tegra124-sor"
+  - reg: Physical base address and length of the controller's registers.
+  - interrupts: The interrupt outputs from the controller.
+  - clocks: Must contain an entry for each entry in clock-names.
+    See ../clocks/clock-bindings.txt for details.
+  - clock-names: Must include the following entries:
+    - sor: clock input for the SOR hardware
+    - parent: input for the pixel clock
+    - dp: reference clock for the SOR clock
+    - safe: safe reference for the SOR clock during power up
+  - resets: Must contain an entry for each entry in reset-names.
+    See ../reset/reset.txt for details.
+  - reset-names: Must include the following entries:
+    - sor
+
+  Optional properties:
+  - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
+  - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
+  - nvidia,edid: supplies a binary EDID blob
+  - nvidia,panel: phandle of a display panel
+
+  Optional properties when driving an eDP output:
+  - nvidia,dpaux: phandle to a DispayPort AUX interface
+
+- dpaux: DisplayPort AUX interface
+  - compatible: "nvidia,tegra124-dpaux"
+  - reg: Physical base address and length of the controller's registers.
+  - interrupts: The interrupt outputs from the controller.
+  - clocks: Must contain an entry for each entry in clock-names.
+    See ../clocks/clock-bindings.txt for details.
+  - clock-names: Must include the following entries:
+    - dpaux: clock input for the DPAUX hardware
+    - parent: reference clock
+  - resets: Must contain an entry for each entry in reset-names.
+    See ../reset/reset.txt for details.
+  - reset-names: Must include the following entries:
+    - dpaux
+  - vdd-supply: phandle of a supply that powers the DisplayPort link
+
+Example:
+
+/ {
+	...
+
+	host1x {
+		compatible = "nvidia,tegra20-host1x", "simple-bus";
+		reg = <0x50000000 0x00024000>;
+		interrupts = <0 65 0x04   /* mpcore syncpt */
+			      0 67 0x04>; /* mpcore general */
+		clocks = <&tegra_car TEGRA20_CLK_HOST1X>;
+		resets = <&tegra_car 28>;
+		reset-names = "host1x";
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		ranges = <0x54000000 0x54000000 0x04000000>;
+
+		mpe {
+			compatible = "nvidia,tegra20-mpe";
+			reg = <0x54040000 0x00040000>;
+			interrupts = <0 68 0x04>;
+			clocks = <&tegra_car TEGRA20_CLK_MPE>;
+			resets = <&tegra_car 60>;
+			reset-names = "mpe";
+		};
+
+		vi {
+			compatible = "nvidia,tegra20-vi";
+			reg = <0x54080000 0x00040000>;
+			interrupts = <0 69 0x04>;
+			clocks = <&tegra_car TEGRA20_CLK_VI>;
+			resets = <&tegra_car 100>;
+			reset-names = "vi";
+		};
+
+		epp {
+			compatible = "nvidia,tegra20-epp";
+			reg = <0x540c0000 0x00040000>;
+			interrupts = <0 70 0x04>;
+			clocks = <&tegra_car TEGRA20_CLK_EPP>;
+			resets = <&tegra_car 19>;
+			reset-names = "epp";
+		};
+
+		isp {
+			compatible = "nvidia,tegra20-isp";
+			reg = <0x54100000 0x00040000>;
+			interrupts = <0 71 0x04>;
+			clocks = <&tegra_car TEGRA20_CLK_ISP>;
+			resets = <&tegra_car 23>;
+			reset-names = "isp";
+		};
+
+		gr2d {
+			compatible = "nvidia,tegra20-gr2d";
+			reg = <0x54140000 0x00040000>;
+			interrupts = <0 72 0x04>;
+			clocks = <&tegra_car TEGRA20_CLK_GR2D>;
+			resets = <&tegra_car 21>;
+			reset-names = "2d";
+		};
+
+		gr3d {
+			compatible = "nvidia,tegra20-gr3d";
+			reg = <0x54180000 0x00040000>;
+			clocks = <&tegra_car TEGRA20_CLK_GR3D>;
+			resets = <&tegra_car 24>;
+			reset-names = "3d";
+		};
+
+		dc@54200000 {
+			compatible = "nvidia,tegra20-dc";
+			reg = <0x54200000 0x00040000>;
+			interrupts = <0 73 0x04>;
+			clocks = <&tegra_car TEGRA20_CLK_DISP1>,
+				 <&tegra_car TEGRA20_CLK_PLL_P>;
+			clock-names = "dc", "parent";
+			resets = <&tegra_car 27>;
+			reset-names = "dc";
+
+			rgb {
+				status = "disabled";
+			};
+		};
+
+		dc@54240000 {
+			compatible = "nvidia,tegra20-dc";
+			reg = <0x54240000 0x00040000>;
+			interrupts = <0 74 0x04>;
+			clocks = <&tegra_car TEGRA20_CLK_DISP2>,
+				 <&tegra_car TEGRA20_CLK_PLL_P>;
+			clock-names = "dc", "parent";
+			resets = <&tegra_car 26>;
+			reset-names = "dc";
+
+			rgb {
+				status = "disabled";
+			};
+		};
+
+		hdmi {
+			compatible = "nvidia,tegra20-hdmi";
+			reg = <0x54280000 0x00040000>;
+			interrupts = <0 75 0x04>;
+			clocks = <&tegra_car TEGRA20_CLK_HDMI>,
+				 <&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
+			clock-names = "hdmi", "parent";
+			resets = <&tegra_car 51>;
+			reset-names = "hdmi";
+			status = "disabled";
+		};
+
+		tvo {
+			compatible = "nvidia,tegra20-tvo";
+			reg = <0x542c0000 0x00040000>;
+			interrupts = <0 76 0x04>;
+			clocks = <&tegra_car TEGRA20_CLK_TVO>;
+			status = "disabled";
+		};
+
+		dsi {
+			compatible = "nvidia,tegra20-dsi";
+			reg = <0x54300000 0x00040000>;
+			clocks = <&tegra_car TEGRA20_CLK_DSI>,
+				 <&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
+			clock-names = "dsi", "parent";
+			resets = <&tegra_car 48>;
+			reset-names = "dsi";
+			status = "disabled";
+		};
+	};
+
+	...
+};
diff --git a/doc/device-tree-bindings/video/display-timing.txt b/doc/device-tree-bindings/video/display-timing.txt
new file mode 100644
index 0000000000..e1d4a0b596
--- /dev/null
+++ b/doc/device-tree-bindings/video/display-timing.txt
@@ -0,0 +1,110 @@
+display-timing bindings
+=======================
+
+display-timings node
+--------------------
+
+required properties:
+ - none
+
+optional properties:
+ - native-mode: The native mode for the display, in case multiple modes are
+		provided. When omitted, assume the first node is the native.
+
+timing subnode
+--------------
+
+required properties:
+ - hactive, vactive: display resolution
+ - hfront-porch, hback-porch, hsync-len: horizontal display timing parameters
+   in pixels
+   vfront-porch, vback-porch, vsync-len: vertical display timing parameters in
+   lines
+ - clock-frequency: display clock in Hz
+
+optional properties:
+ - hsync-active: hsync pulse is active low/high/ignored
+ - vsync-active: vsync pulse is active low/high/ignored
+ - de-active: data-enable pulse is active low/high/ignored
+ - pixelclk-active: with
+			- active high = drive pixel data on rising edge/
+					sample data on falling edge
+			- active low  = drive pixel data on falling edge/
+					sample data on rising edge
+			- ignored     = ignored
+ - interlaced (bool): boolean to enable interlaced mode
+ - doublescan (bool): boolean to enable doublescan mode
+ - doubleclk (bool): boolean to enable doubleclock mode
+
+All the optional properties that are not bool follow the following logic:
+    <1>: high active
+    <0>: low active
+    omitted: not used on hardware
+
+There are different ways of describing the capabilities of a display. The
+devicetree representation corresponds to the one commonly found in datasheets
+for displays. If a display supports multiple signal timings, the native-mode
+can be specified.
+
+The parameters are defined as:
+
+  +----------+-------------------------------------+----------+-------+
+  |          |        ↑                            |          |       |
+  |          |        |vback_porch                 |          |       |
+  |          |        ↓                            |          |       |
+  +----------#######################################----------+-------+
+  |          #        ↑                            #          |       |
+  |          #        |                            #          |       |
+  |  hback   #        |                            #  hfront  | hsync |
+  |   porch  #        |       hactive              #  porch   |  len  |
+  |<-------->#<-------+--------------------------->#<-------->|<----->|
+  |          #        |                            #          |       |
+  |          #        |vactive                     #          |       |
+  |          #        |                            #          |       |
+  |          #        ↓                            #          |       |
+  +----------#######################################----------+-------+
+  |          |        ↑                            |          |       |
+  |          |        |vfront_porch                |          |       |
+  |          |        ↓                            |          |       |
+  +----------+-------------------------------------+----------+-------+
+  |          |        ↑                            |          |       |
+  |          |        |vsync_len                   |          |       |
+  |          |        ↓                            |          |       |
+  +----------+-------------------------------------+----------+-------+
+
+Example:
+
+	display-timings {
+		native-mode = <&timing0>;
+		timing0: 1080p24 {
+			/* 1920x1080p24 */
+			clock-frequency = <52000000>;
+			hactive = <1920>;
+			vactive = <1080>;
+			hfront-porch = <25>;
+			hback-porch = <25>;
+			hsync-len = <25>;
+			vback-porch = <2>;
+			vfront-porch = <2>;
+			vsync-len = <2>;
+			hsync-active = <1>;
+		};
+	};
+
+Every required property also supports the use of ranges, so the commonly used
+datasheet description with minimum, typical and maximum values can be used.
+
+Example:
+
+	timing1: timing {
+		/* 1920x1080p24 */
+		clock-frequency = <148500000>;
+		hactive = <1920>;
+		vactive = <1080>;
+		hsync-len = <0 44 60>;
+		hfront-porch = <80 88 95>;
+		hback-porch = <100 148 160>;
+		vfront-porch = <0 4 6>;
+		vback-porch = <0 36 50>;
+		vsync-len = <0 5 6>;
+	};