avr32: Add gclk helper functions

Add two helper functions for configuring and enabling generic clocks:
  - gclk_enable_output: Enables output on a GCLKx pin
  - gclk_set_rate: Configures a gclk to run at a specific rate

This should eliminate any reason to go mucking about with PM registers
from board code.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

1 files changed, 25 insertions, 0 deletions

diff --git a/cpu/at32ap/at32ap700x/clk.c b/cpu/at32ap/at32ap700x/clk.c
index b3aa03495f..a6a6c885e5 100644
--- a/cpu/at32ap/at32ap700x/clk.c
+++ b/cpu/at32ap/at32ap700x/clk.c
@@ -25,6 +25,7 @@
 
 #include <asm/arch/clk.h>
 #include <asm/arch/memory-map.h>
+#include <asm/arch/portmux.h>
 
 #include "sm.h"
 
@@ -66,3 +67,27 @@ void clk_init(void)
 	sm_writel(PM_MCCTRL, SM_BIT(PLLSEL));
 #endif
 }
+
+unsigned long __gclk_set_rate(unsigned int id, enum gclk_parent parent,
+		unsigned long rate, unsigned long parent_rate)
+{
+	unsigned long divider;
+
+	if (rate == 0 || parent_rate == 0) {
+		sm_writel(PM_GCCTRL(id), 0);
+		return 0;
+	}
+
+	divider = (parent_rate + rate / 2) / rate;
+	if (divider <= 1) {
+		sm_writel(PM_GCCTRL(id), parent | SM_BIT(CEN));
+		rate = parent_rate;
+	} else {
+		divider = min(255, divider / 2 - 1);
+		sm_writel(PM_GCCTRL(id), parent | SM_BIT(CEN) | SM_BIT(DIVEN)
+				| SM_BF(DIV, divider));
+		rate = parent_rate / (2 * (divider + 1));
+	}
+
+	return rate;
+}