ppc: Move cpu/$CPU to arch/ppc/cpu/$CPU

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

1 files changed, 0 insertions, 221 deletions

diff --git a/cpu/mpc8260/commproc.c b/cpu/mpc8260/commproc.c
deleted file mode 100644
index 94f6bc224f..0000000000
--- a/cpu/mpc8260/commproc.c
+++ /dev/null
@@ -1,221 +0,0 @@
-/*
- * This file is based on "arch/ppc/8260_io/commproc.c" - here is it's
- * copyright notice:
- *
- * General Purpose functions for the global management of the
- * 8260 Communication Processor Module.
- * Copyright (c) 1999 Dan Malek (dmalek@jlc.net)
- * Copyright (c) 2000 MontaVista Software, Inc (source@mvista.com)
- *	2.3.99 Updates
- *
- * In addition to the individual control of the communication
- * channels, there are a few functions that globally affect the
- * communication processor.
- *
- * Buffer descriptors must be allocated from the dual ported memory
- * space.  The allocator for that is here.  When the communication
- * process is reset, we reclaim the memory available.  There is
- * currently no deallocator for this memory.
- */
-#include <common.h>
-#include <asm/cpm_8260.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void
-m8260_cpm_reset(void)
-{
-	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
-	volatile ulong count;
-
-	/* Reclaim the DP memory for our use.
-	*/
-	gd->dp_alloc_base = CPM_DATAONLY_BASE;
-	gd->dp_alloc_top = gd->dp_alloc_base + CPM_DATAONLY_SIZE;
-
-	/*
-	 * Reset CPM
-	 */
-	immr->im_cpm.cp_cpcr = CPM_CR_RST;
-	count = 0;
-	do {			/* Spin until command processed		*/
-		__asm__ __volatile__ ("eieio");
-	} while ((immr->im_cpm.cp_cpcr & CPM_CR_FLG) && ++count < 1000000);
-
-#ifdef CONFIG_HARD_I2C
-	*((unsigned short*)(&immr->im_dprambase[PROFF_I2C_BASE])) = 0;
-#endif
-}
-
-/* Allocate some memory from the dual ported ram.
- * To help protocols with object alignment restrictions, we do that
- * if they ask.
- */
-uint
-m8260_cpm_dpalloc(uint size, uint align)
-{
-	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
-	uint	retloc;
-	uint	align_mask, off;
-	uint	savebase;
-
-	align_mask = align - 1;
-	savebase = gd->dp_alloc_base;
-
-	if ((off = (gd->dp_alloc_base & align_mask)) != 0)
-		gd->dp_alloc_base += (align - off);
-
-	if ((off = size & align_mask) != 0)
-		size += align - off;
-
-	if ((gd->dp_alloc_base + size) >= gd->dp_alloc_top) {
-		gd->dp_alloc_base = savebase;
-		panic("m8260_cpm_dpalloc: ran out of dual port ram!");
-	}
-
-	retloc = gd->dp_alloc_base;
-	gd->dp_alloc_base += size;
-
-	memset((void *)&immr->im_dprambase[retloc], 0, size);
-
-	return(retloc);
-}
-
-/* We also own one page of host buffer space for the allocation of
- * UART "fifos" and the like.
- */
-uint
-m8260_cpm_hostalloc(uint size, uint align)
-{
-	/* the host might not even have RAM yet - just use dual port RAM */
-	return (m8260_cpm_dpalloc(size, align));
-}
-
-/* Set a baud rate generator.  This needs lots of work.  There are
- * eight BRGs, which can be connected to the CPM channels or output
- * as clocks.  The BRGs are in two different block of internal
- * memory mapped space.
- * The baud rate clock is the system clock divided by something.
- * It was set up long ago during the initial boot phase and is
- * is given to us.
- * Baud rate clocks are zero-based in the driver code (as that maps
- * to port numbers).  Documentation uses 1-based numbering.
- */
-#define BRG_INT_CLK	gd->brg_clk
-#define BRG_UART_CLK	(BRG_INT_CLK / 16)
-
-/* This function is used by UARTs, or anything else that uses a 16x
- * oversampled clock.
- */
-void
-m8260_cpm_setbrg(uint brg, uint rate)
-{
-	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
-	volatile uint	*bp;
-	uint cd = BRG_UART_CLK / rate;
-
-	if ((BRG_UART_CLK % rate) < (rate / 2))
-		cd--;
-	if (brg < 4) {
-		bp = (uint *)&immr->im_brgc1;
-	}
-	else {
-		bp = (uint *)&immr->im_brgc5;
-		brg -= 4;
-	}
-	bp += brg;
-	*bp = (cd << 1) | CPM_BRG_EN;
-}
-
-/* This function is used to set high speed synchronous baud rate
- * clocks.
- */
-void
-m8260_cpm_fastbrg(uint brg, uint rate, int div16)
-{
-	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
-	volatile uint	*bp;
-
-	/* This is good enough to get SMCs running.....
-	*/
-	if (brg < 4) {
-		bp = (uint *)&immr->im_brgc1;
-	}
-	else {
-		bp = (uint *)&immr->im_brgc5;
-		brg -= 4;
-	}
-	bp += brg;
-	*bp = (((((BRG_INT_CLK+rate-1)/rate)-1)&0xfff)<<1)|CPM_BRG_EN;
-	if (div16)
-		*bp |= CPM_BRG_DIV16;
-}
-
-/* This function is used to set baud rate generators using an external
- * clock source and 16x oversampling.
- */
-
-void
-m8260_cpm_extcbrg(uint brg, uint rate, uint extclk, int pinsel)
-{
-	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
-	volatile uint	*bp;
-
-	if (brg < 4) {
-		bp = (uint *)&immr->im_brgc1;
-	}
-	else {
-		bp = (uint *)&immr->im_brgc5;
-		brg -= 4;
-	}
-	bp += brg;
-	*bp = ((((((extclk/16)+rate-1)/rate)-1)&0xfff)<<1)|CPM_BRG_EN;
-	if (pinsel == 0)
-		*bp |= CPM_BRG_EXTC_CLK3_9;
-	else
-		*bp |= CPM_BRG_EXTC_CLK5_15;
-}
-
-#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
-
-void post_word_store (ulong a)
-{
-	volatile ulong *save_addr =
-		(volatile ulong *)(CONFIG_SYS_IMMR + CPM_POST_WORD_ADDR);
-
-	*save_addr = a;
-}
-
-ulong post_word_load (void)
-{
-	volatile ulong *save_addr =
-		(volatile ulong *)(CONFIG_SYS_IMMR + CPM_POST_WORD_ADDR);
-
-	return *save_addr;
-}
-
-#endif	/* CONFIG_POST || CONFIG_LOGBUFFER*/
-
-#ifdef CONFIG_BOOTCOUNT_LIMIT
-
-void bootcount_store (ulong a)
-{
-	volatile ulong *save_addr =
-		(volatile ulong *)(CONFIG_SYS_IMMR + CPM_BOOTCOUNT_ADDR);
-
-	save_addr[0] = a;
-	save_addr[1] = BOOTCOUNT_MAGIC;
-}
-
-ulong bootcount_load (void)
-{
-	volatile ulong *save_addr =
-		(volatile ulong *)(CONFIG_SYS_IMMR + CPM_BOOTCOUNT_ADDR);
-
-	if (save_addr[1] != BOOTCOUNT_MAGIC)
-		return 0;
-	else
-		return save_addr[0];
-}
-
-#endif /* CONFIG_BOOTCOUNT_LIMIT */