diff options
| author | Shengzhou Liu <Shengzhou.Liu@freescale.com> | 2014-11-24 17:11:56 +0800 |
|---|---|---|
| committer | York Sun <yorksun@freescale.com> | 2014-12-05 08:06:15 -0800 |
| commit | 48c6f328f00d245fb92f330ff94b213e8a375621 (patch) | |
| tree | 44d288d0bc4e8207da4c8654f01ce2d9e8d0be76 /configs/T1024RDB_SPIFLASH_defconfig | |
| parent | aba800481879e3674b55c95d63bcbd8aff1cb204 (diff) | |
| download | talos-obmc-uboot-48c6f328f00d245fb92f330ff94b213e8a375621.tar.gz talos-obmc-uboot-48c6f328f00d245fb92f330ff94b213e8a375621.zip | |
powerpc/t1024rdb: Add T1024 RDB board support
T1024RDB is a Freescale Reference Design Board that hosts the T1024 SoC.
T1024RDB board Overview
-----------------------
- T1024 SoC integrating two 64-bit e5500 cores up to 1.4GHz
- CoreNet fabric supporting coherent and noncoherent transactions with
prioritization and bandwidth allocation
- 32-/64-bit DDR3L SDRAM memory controller with ECC and interleaving support
- Accelerator: DPAA components consist of FMan, BMan, QMan, DCE and SEC
- Ethernet interfaces:
- Two 10M/100M/1G RGMII ports on-board
- one 10Gbps XFI interface
- PCIe: Three PCIe controllers: one PCIe Slot and two Mini-PCIe connectors.
- SerDes: 4 lanes up to 10.3125GHz
- IFC: 128MB NOR Flash, 512MB NAND Flash and CPLD
- eSPI: 64MB N25Q512 SPI flash.
- Deep Sleep power implementaion (wakeup from GPIO/Timer/Ethernet/USB)
- USB: Two Type-A USB2.0 ports with internal PHY
- eSDHC: Support SD, SDHC, SDXC and MMC/eMMC
- I2C: Four I2C controllers
- UART: Two UART serial ports
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
[York Sun: Fix ft_board_setup() type, fix MAINTAINERS for SECURE_BOOT
Fix Kconfig by adding SUPPORT_SPL]
Reviewed-by: York Sun <yorksun@freescale.com>
Diffstat (limited to 'configs/T1024RDB_SPIFLASH_defconfig')
| -rw-r--r-- | configs/T1024RDB_SPIFLASH_defconfig | 5 |
1 files changed, 5 insertions, 0 deletions
diff --git a/configs/T1024RDB_SPIFLASH_defconfig b/configs/T1024RDB_SPIFLASH_defconfig new file mode 100644 index 0000000000..c8ea98544a --- /dev/null +++ b/configs/T1024RDB_SPIFLASH_defconfig @@ -0,0 +1,5 @@ +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="PPC_T1024,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH" ++S:CONFIG_PPC=y ++S:CONFIG_MPC85xx=y ++S:CONFIG_TARGET_T102XRDB=y |
