Merge branch 'origin' into kconfig-for-1.3.1

Conflicts:

	drivers/Makefile

5 files changed, 170 insertions, 140 deletions

diff --git a/common/cmd_ide.c b/common/cmd_ide.c
index bb064eaa04..2202009f5f 100644
--- a/common/cmd_ide.c
+++ b/common/cmd_ide.c
@@ -54,10 +54,6 @@
 
 #ifndef __PPC__
 #include <asm/io.h>
-#ifdef __MIPS__
-/* Macros depend on this variable */
-unsigned long mips_io_port_base = 0;
-#endif
 #endif
 
 #ifdef CONFIG_IDE_8xx_DIRECT
@@ -1136,9 +1132,9 @@ static void ide_ident (block_dev_desc_t *dev_desc)
 
 	input_swap_data (device, iobuf, ATA_SECTORWORDS);
 
-	ident_cpy (dev_desc->revision, iop->fw_rev, sizeof(dev_desc->revision));
-	ident_cpy (dev_desc->vendor, iop->model, sizeof(dev_desc->vendor));
-	ident_cpy (dev_desc->product, iop->serial_no, sizeof(dev_desc->product));
+	ident_cpy ((unsigned char*)dev_desc->revision, iop->fw_rev, sizeof(dev_desc->revision));
+	ident_cpy ((unsigned char*)dev_desc->vendor, iop->model, sizeof(dev_desc->vendor));
+	ident_cpy ((unsigned char*)dev_desc->product, iop->serial_no, sizeof(dev_desc->product));
 #ifdef __LITTLE_ENDIAN
 	/*
 	 * firmware revision and model number have Big Endian Byte
@@ -1953,9 +1949,9 @@ static void	atapi_inquiry(block_dev_desc_t * dev_desc)
 		return;
 
 	/* copy device ident strings */
-	ident_cpy(dev_desc->vendor,&iobuf[8],8);
-	ident_cpy(dev_desc->product,&iobuf[16],16);
-	ident_cpy(dev_desc->revision,&iobuf[32],5);
+	ident_cpy((unsigned char*)dev_desc->vendor,&iobuf[8],8);
+	ident_cpy((unsigned char*)dev_desc->product,&iobuf[16],16);
+	ident_cpy((unsigned char*)dev_desc->revision,&iobuf[32],5);
 
 	dev_desc->lun=0;
 	dev_desc->lba=0;
diff --git a/common/cmd_mii.c b/common/cmd_mii.c
index 72e11d5442..3b4dc8ae09 100644
--- a/common/cmd_mii.c
+++ b/common/cmd_mii.c
@@ -112,9 +112,11 @@ int do_mii (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 					"OUI = 0x%04X, "
 					"Model = 0x%02X, "
 					"Rev = 0x%02X, "
-					"%3dbaseT, %s\n",
+					"%3dbase%s, %s\n",
 					j, oui, model, rev,
 					miiphy_speed (devname, j),
+					miiphy_is_1000base_x (devname, j)
+						? "X" : "T",
 					(miiphy_duplex (devname, j) == FULL)
 						? "FDX" : "HDX");
 			}
@@ -496,9 +498,11 @@ int do_mii (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 					"OUI = 0x%04X, "
 					"Model = 0x%02X, "
 					"Rev = 0x%02X, "
-					"%3dbaseT, %s\n",
+					"%3dbase%s, %s\n",
 					j, oui, model, rev,
 					miiphy_speed (devname, j),
+					miiphy_is_1000base_x (devname, j)
+						? "X" : "T",
 					(miiphy_duplex (devname, j) == FULL)
 						? "FDX" : "HDX");
 			}
diff --git a/common/miiphyutil.c b/common/miiphyutil.c
index c69501fedf..281f0b29e3 100644
--- a/common/miiphyutil.c
+++ b/common/miiphyutil.c
@@ -49,10 +49,10 @@
 struct mii_dev {
 	struct list_head link;
 	char *name;
-	int (* read)(char *devname, unsigned char addr,
-			unsigned char reg, unsigned short *value);
-	int (* write)(char *devname, unsigned char addr,
-			unsigned char reg, unsigned short value);
+	int (*read) (char *devname, unsigned char addr,
+		     unsigned char reg, unsigned short *value);
+	int (*write) (char *devname, unsigned char addr,
+		      unsigned char reg, unsigned short value);
 };
 
 static struct list_head mii_devs;
@@ -62,21 +62,21 @@ static struct mii_dev *current_mii;
  *
  * Initialize global data. Need to be called before any other miiphy routine.
  */
-void miiphy_init()
+void miiphy_init ()
 {
-		INIT_LIST_HEAD(&mii_devs);
-		current_mii = NULL;
+	INIT_LIST_HEAD (&mii_devs);
+	current_mii = NULL;
 }
 
 /*****************************************************************************
  *
  * Register read and write MII access routines for the device <name>.
  */
-void miiphy_register(char *name,
-		int (* read)(char *devname, unsigned char addr,
-			unsigned char reg, unsigned short *value),
-		int (* write)(char *devname, unsigned char addr,
-			unsigned char reg, unsigned short value))
+void miiphy_register (char *name,
+		      int (*read) (char *devname, unsigned char addr,
+				   unsigned char reg, unsigned short *value),
+		      int (*write) (char *devname, unsigned char addr,
+				    unsigned char reg, unsigned short value))
 {
 	struct list_head *entry;
 	struct mii_dev *new_dev;
@@ -84,63 +84,64 @@ void miiphy_register(char *name,
 	unsigned int name_len;
 
 	/* check if we have unique name */
-	list_for_each(entry, &mii_devs) {
-		miidev = list_entry(entry, struct mii_dev, link);
-		if (strcmp(miidev->name, name) == 0) {
-			printf("miiphy_register: non unique device name '%s'\n",
-					name);
+	list_for_each (entry, &mii_devs) {
+		miidev = list_entry (entry, struct mii_dev, link);
+		if (strcmp (miidev->name, name) == 0) {
+			printf ("miiphy_register: non unique device name "
+				"'%s'\n", name);
 			return;
 		}
 	}
 
 	/* allocate memory */
-	name_len = strlen(name);
-	new_dev = (struct mii_dev *)malloc(sizeof(struct mii_dev) + name_len + 1);
+	name_len = strlen (name);
+	new_dev =
+	    (struct mii_dev *)malloc (sizeof (struct mii_dev) + name_len + 1);
 
-	if(new_dev == NULL) {
-		printf("miiphy_register: cannot allocate memory for '%s'\n",
-				name);
+	if (new_dev == NULL) {
+		printf ("miiphy_register: cannot allocate memory for '%s'\n",
+			name);
 		return;
 	}
-	memset(new_dev, 0, sizeof(struct mii_dev) + name_len);
+	memset (new_dev, 0, sizeof (struct mii_dev) + name_len);
 
 	/* initalize mii_dev struct fields */
-	INIT_LIST_HEAD(&new_dev->link);
+	INIT_LIST_HEAD (&new_dev->link);
 	new_dev->read = read;
 	new_dev->write = write;
 	new_dev->name = (char *)(new_dev + 1);
-	strncpy(new_dev->name, name, name_len);
+	strncpy (new_dev->name, name, name_len);
 	new_dev->name[name_len] = '\0';
 
-	debug("miiphy_register: added '%s', read=0x%08lx, write=0x%08lx\n",
-			new_dev->name, new_dev->read, new_dev->write);
+	debug ("miiphy_register: added '%s', read=0x%08lx, write=0x%08lx\n",
+	       new_dev->name, new_dev->read, new_dev->write);
 
 	/* add it to the list */
-	list_add_tail(&new_dev->link, &mii_devs);
+	list_add_tail (&new_dev->link, &mii_devs);
 
 	if (!current_mii)
 		current_mii = new_dev;
 }
 
-int miiphy_set_current_dev(char *devname)
+int miiphy_set_current_dev (char *devname)
 {
 	struct list_head *entry;
 	struct mii_dev *dev;
 
-	list_for_each(entry, &mii_devs) {
-		dev = list_entry(entry, struct mii_dev, link);
+	list_for_each (entry, &mii_devs) {
+		dev = list_entry (entry, struct mii_dev, link);
 
-		if (strcmp(devname, dev->name) == 0) {
+		if (strcmp (devname, dev->name) == 0) {
 			current_mii = dev;
 			return 0;
 		}
 	}
 
-	printf("No such device: %s\n", devname);
+	printf ("No such device: %s\n", devname);
 	return 1;
 }
 
-char *miiphy_get_current_dev()
+char *miiphy_get_current_dev ()
 {
 	if (current_mii)
 		return current_mii->name;
@@ -156,8 +157,8 @@ char *miiphy_get_current_dev()
  * Returns:
  *   0 on success
  */
-int miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		unsigned short *value)
+int miiphy_read (char *devname, unsigned char addr, unsigned char reg,
+		 unsigned short *value)
 {
 	struct list_head *entry;
 	struct mii_dev *dev;
@@ -165,22 +166,22 @@ int miiphy_read(char *devname, unsigned char addr, unsigned char reg,
 	int read_ret = 0;
 
 	if (!devname) {
-		printf("NULL device name!\n");
+		printf ("NULL device name!\n");
 		return 1;
 	}
 
-	list_for_each(entry, &mii_devs) {
-		dev = list_entry(entry, struct mii_dev, link);
+	list_for_each (entry, &mii_devs) {
+		dev = list_entry (entry, struct mii_dev, link);
 
-		if (strcmp(devname, dev->name) == 0) {
+		if (strcmp (devname, dev->name) == 0) {
 			found_dev = 1;
-			read_ret = dev->read(devname, addr, reg, value);
+			read_ret = dev->read (devname, addr, reg, value);
 			break;
 		}
 	}
 
 	if (found_dev == 0)
-		printf("No such device: %s\n", devname);
+		printf ("No such device: %s\n", devname);
 
 	return ((found_dev) ? read_ret : 1);
 }
@@ -193,8 +194,8 @@ int miiphy_read(char *devname, unsigned char addr, unsigned char reg,
  * Returns:
  *   0 on success
  */
-int miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-		unsigned short value)
+int miiphy_write (char *devname, unsigned char addr, unsigned char reg,
+		  unsigned short value)
 {
 	struct list_head *entry;
 	struct mii_dev *dev;
@@ -202,22 +203,22 @@ int miiphy_write(char *devname, unsigned char addr, unsigned char reg,
 	int write_ret = 0;
 
 	if (!devname) {
-		printf("NULL device name!\n");
+		printf ("NULL device name!\n");
 		return 1;
 	}
 
-	list_for_each(entry, &mii_devs) {
-		dev = list_entry(entry, struct mii_dev, link);
+	list_for_each (entry, &mii_devs) {
+		dev = list_entry (entry, struct mii_dev, link);
 
-		if (strcmp(devname, dev->name) == 0) {
+		if (strcmp (devname, dev->name) == 0) {
 			found_dev = 1;
-			write_ret = dev->write(devname, addr, reg, value);
+			write_ret = dev->write (devname, addr, reg, value);
 			break;
 		}
 	}
 
 	if (found_dev == 0)
-		printf("No such device: %s\n", devname);
+		printf ("No such device: %s\n", devname);
 
 	return ((found_dev) ? write_ret : 1);
 }
@@ -226,23 +227,22 @@ int miiphy_write(char *devname, unsigned char addr, unsigned char reg,
  *
  * Print out list of registered MII capable devices.
  */
-void miiphy_listdev(void)
+void miiphy_listdev (void)
 {
 	struct list_head *entry;
 	struct mii_dev *dev;
 
-	puts("MII devices: ");
-	list_for_each(entry, &mii_devs) {
-		dev = list_entry(entry, struct mii_dev, link);
-		printf("'%s' ", dev->name);
+	puts ("MII devices: ");
+	list_for_each (entry, &mii_devs) {
+		dev = list_entry (entry, struct mii_dev, link);
+		printf ("'%s' ", dev->name);
 	}
-	puts("\n");
+	puts ("\n");
 
 	if (current_mii)
-		printf("Current device: '%s'\n", current_mii->name);
+		printf ("Current device: '%s'\n", current_mii->name);
 }
 
-
 /*****************************************************************************
  *
  * Read the OUI, manufacture's model number, and revision number.
@@ -254,9 +254,7 @@ void miiphy_listdev(void)
  * Returns:
  *   0 on success
  */
-int miiphy_info (char *devname,
-		 unsigned char addr,
-		 unsigned int *oui,
+int miiphy_info (char *devname, unsigned char addr, unsigned int *oui,
 		 unsigned char *model, unsigned char *rev)
 {
 	unsigned int reg = 0;
@@ -288,13 +286,12 @@ int miiphy_info (char *devname,
 #ifdef DEBUG
 	printf ("PHY_PHYIDR[1,2] @ 0x%x = 0x%08x\n", addr, reg);
 #endif
-	*oui   =                 ( reg >> 10);
-	*model = (unsigned char) ((reg >>  4) & 0x0000003F);
-	*rev   = (unsigned char) ( reg        & 0x0000000F);
+	*oui = (reg >> 10);
+	*model = (unsigned char)((reg >> 4) & 0x0000003F);
+	*rev = (unsigned char)(reg & 0x0000000F);
 	return (0);
 }
 
-
 /*****************************************************************************
  *
  * Reset the PHY.
@@ -345,104 +342,138 @@ int miiphy_reset (char *devname, unsigned char addr)
 	return (0);
 }
 
-
 /*****************************************************************************
  *
- * Determine the ethernet speed (10/100).
+ * Determine the ethernet speed (10/100/1000).  Return 10 on error.
  */
 int miiphy_speed (char *devname, unsigned char addr)
 {
-	unsigned short reg;
+	u16 bmcr, anlpar;
 
 #if defined(CONFIG_PHY_GIGE)
-	if (miiphy_read (devname, addr, PHY_1000BTSR, &reg)) {
-		printf ("PHY 1000BT Status read failed\n");
-	} else {
-		if (reg != 0xFFFF) {
-			if ((reg & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD)) !=0) {
-				return (_1000BASET);
-			}
-		}
+	u16 btsr;
+
+	/*
+	 * Check for 1000BASE-X.  If it is supported, then assume that the speed
+	 * is 1000.
+	 */
+	if (miiphy_is_1000base_x (devname, addr)) {
+		return _1000BASET;
+	}
+	/*
+	 * No 1000BASE-X, so assume 1000BASE-T/100BASE-TX/10BASE-T register set.
+	 */
+	/* Check for 1000BASE-T. */
+	if (miiphy_read (devname, addr, PHY_1000BTSR, &btsr)) {
+		printf ("PHY 1000BT status");
+		goto miiphy_read_failed;
+	}
+	if (btsr != 0xFFFF &&
+	    (btsr & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD))) {
+		return _1000BASET;
 	}
 #endif /* CONFIG_PHY_GIGE */
 
 	/* Check Basic Management Control Register first. */
-	if (miiphy_read (devname, addr, PHY_BMCR, &reg)) {
-		puts ("PHY speed read failed, assuming 10bT\n");
-		return (_10BASET);
+	if (miiphy_read (devname, addr, PHY_BMCR, &bmcr)) {
+		printf ("PHY speed");
+		goto miiphy_read_failed;
 	}
 	/* Check if auto-negotiation is on. */
-	if ((reg & PHY_BMCR_AUTON) != 0) {
+	if (bmcr & PHY_BMCR_AUTON) {
 		/* Get auto-negotiation results. */
-		if (miiphy_read (devname, addr, PHY_ANLPAR, &reg)) {
-			puts ("PHY AN speed read failed, assuming 10bT\n");
-			return (_10BASET);
-		}
-		if ((reg & PHY_ANLPAR_100) != 0) {
-			return (_100BASET);
-		} else {
-			return (_10BASET);
+		if (miiphy_read (devname, addr, PHY_ANLPAR, &anlpar)) {
+			printf ("PHY AN speed");
+			goto miiphy_read_failed;
 		}
+		return (anlpar & PHY_ANLPAR_100) ? _100BASET : _10BASET;
 	}
 	/* Get speed from basic control settings. */
-	else if (reg & PHY_BMCR_100MB) {
-		return (_100BASET);
-	} else {
-		return (_10BASET);
-	}
+	return (bmcr & PHY_BMCR_100MB) ? _100BASET : _10BASET;
 
+      miiphy_read_failed:
+	printf (" read failed, assuming 10BASE-T\n");
+	return _10BASET;
 }
 
-
 /*****************************************************************************
  *
- * Determine full/half duplex.
+ * Determine full/half duplex.  Return half on error.
  */
 int miiphy_duplex (char *devname, unsigned char addr)
 {
-	unsigned short reg;
+	u16 bmcr, anlpar;
 
 #if defined(CONFIG_PHY_GIGE)
-	if (miiphy_read (devname, addr, PHY_1000BTSR, &reg)) {
-		printf ("PHY 1000BT Status read failed\n");
-	} else {
-		if ( (reg != 0xFFFF) &&
-		     (reg & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD)) ) {
-			if ((reg & PHY_1000BTSR_1000FD) !=0) {
-				return (FULL);
-			} else {
-				return (HALF);
-			}
+	u16 btsr;
+
+	/* Check for 1000BASE-X. */
+	if (miiphy_is_1000base_x (devname, addr)) {
+		/* 1000BASE-X */
+		if (miiphy_read (devname, addr, PHY_ANLPAR, &anlpar)) {
+			printf ("1000BASE-X PHY AN duplex");
+			goto miiphy_read_failed;
+		}
+	}
+	/*
+	 * No 1000BASE-X, so assume 1000BASE-T/100BASE-TX/10BASE-T register set.
+	 */
+	/* Check for 1000BASE-T. */
+	if (miiphy_read (devname, addr, PHY_1000BTSR, &btsr)) {
+		printf ("PHY 1000BT status");
+		goto miiphy_read_failed;
+	}
+	if (btsr != 0xFFFF) {
+		if (btsr & PHY_1000BTSR_1000FD) {
+			return FULL;
+		} else if (btsr & PHY_1000BTSR_1000HD) {
+			return HALF;
 		}
 	}
 #endif /* CONFIG_PHY_GIGE */
 
 	/* Check Basic Management Control Register first. */
-	if (miiphy_read (devname, addr, PHY_BMCR, &reg)) {
-		puts ("PHY duplex read failed, assuming half duplex\n");
-		return (HALF);
+	if (miiphy_read (devname, addr, PHY_BMCR, &bmcr)) {
+		puts ("PHY duplex");
+		goto miiphy_read_failed;
 	}
 	/* Check if auto-negotiation is on. */
-	if ((reg & PHY_BMCR_AUTON) != 0) {
+	if (bmcr & PHY_BMCR_AUTON) {
 		/* Get auto-negotiation results. */
-		if (miiphy_read (devname, addr, PHY_ANLPAR, &reg)) {
-			puts ("PHY AN duplex read failed, assuming half duplex\n");
-			return (HALF);
-		}
-
-		if ((reg & (PHY_ANLPAR_10FD | PHY_ANLPAR_TXFD)) != 0) {
-			return (FULL);
-		} else {
-			return (HALF);
+		if (miiphy_read (devname, addr, PHY_ANLPAR, &anlpar)) {
+			puts ("PHY AN duplex");
+			goto miiphy_read_failed;
 		}
+		return (anlpar & (PHY_ANLPAR_10FD | PHY_ANLPAR_TXFD)) ?
+		    FULL : HALF;
 	}
 	/* Get speed from basic control settings. */
-	else if (reg & PHY_BMCR_DPLX) {
-		return (FULL);
-	} else {
-		return (HALF);
-	}
+	return (bmcr & PHY_BMCR_DPLX) ? FULL : HALF;
+
+      miiphy_read_failed:
+	printf (" read failed, assuming half duplex\n");
+	return HALF;
+}
 
+/*****************************************************************************
+ *
+ * Return 1 if PHY supports 1000BASE-X, 0 if PHY supports 10BASE-T/100BASE-TX/
+ * 1000BASE-T, or on error.
+ */
+int miiphy_is_1000base_x (char *devname, unsigned char addr)
+{
+#if defined(CONFIG_PHY_GIGE)
+	u16 exsr;
+
+	if (miiphy_read (devname, addr, PHY_EXSR, &exsr)) {
+		printf ("PHY extended status read failed, assuming no "
+			"1000BASE-X\n");
+		return 0;
+	}
+	return 0 != (exsr & (PHY_EXSR_1000XF | PHY_EXSR_1000XH));
+#else
+	return 0;
+#endif
 }
 
 #ifdef CFG_FAULT_ECHO_LINK_DOWN
@@ -455,7 +486,7 @@ int miiphy_link (char *devname, unsigned char addr)
 	unsigned short reg;
 
 	/* dummy read; needed to latch some phys */
-	(void)miiphy_read(devname, addr, PHY_BMSR, &reg);
+	(void)miiphy_read (devname, addr, PHY_BMSR, &reg);
 	if (miiphy_read (devname, addr, PHY_BMSR, &reg)) {
 		puts ("PHY_BMSR read failed, assuming no link\n");
 		return (0);
@@ -469,5 +500,4 @@ int miiphy_link (char *devname, unsigned char addr)
 	}
 }
 #endif
-
 #endif /* CONFIG_MII */
diff --git a/common/spartan2.c b/common/spartan2.c
index 0fb23b6592..06550b9858 100644
--- a/common/spartan2.c
+++ b/common/spartan2.c
@@ -516,7 +516,7 @@ static int Spartan2_ss_load (Xilinx_desc * desc, void *buf, size_t bsize)
 				(*fn->clk) (FALSE, TRUE, cookie);
 				CONFIG_FPGA_DELAY ();
 				/* Write data */
-				(*fn->wr) ((val < 0), TRUE, cookie);
+				(*fn->wr) ((val & 0x80), TRUE, cookie);
 				CONFIG_FPGA_DELAY ();
 				/* Assert the clock */
 				(*fn->clk) (TRUE, TRUE, cookie);
diff --git a/common/spartan3.c b/common/spartan3.c
index c0f2b05e48..f7c4f8cf2b 100644
--- a/common/spartan3.c
+++ b/common/spartan3.c
@@ -521,7 +521,7 @@ static int Spartan3_ss_load (Xilinx_desc * desc, void *buf, size_t bsize)
 				(*fn->clk) (FALSE, TRUE, cookie);
 				CONFIG_FPGA_DELAY ();
 				/* Write data */
-				(*fn->wr) ((val < 0), TRUE, cookie);
+				(*fn->wr) ((val & 0x80), TRUE, cookie);
 				CONFIG_FPGA_DELAY ();
 				/* Assert the clock */
 				(*fn->clk) (TRUE, TRUE, cookie);