Merge branch 'master' of git://git.denx.de/u-boot

181 files changed, 1624 insertions, 9620 deletions

diff --git a/board/BuS/eb_cpux9k2/cpux9k2.c b/board/BuS/eb_cpux9k2/cpux9k2.c
index 5e4778e978..76ad7c443b 100644
--- a/board/BuS/eb_cpux9k2/cpux9k2.c
+++ b/board/BuS/eb_cpux9k2/cpux9k2.c
@@ -98,7 +98,7 @@ int misc_init_r(void)
 				puts("Error: invalid MAC at EEPROM\n");
 		}
 	}
-	gd->jt[XF_do_reset] = (void *) do_reset;
+	gd->jt->do_reset = do_reset;
 
 #ifdef CONFIG_STATUS_LED
 	status_led_set(STATUS_LED_BOOT, STATUS_LED_BLINKING);
diff --git a/board/Marvell/db-mv784mp-gp/binary.0 b/board/Marvell/db-mv784mp-gp/binary.0
deleted file mode 100644
index 17bfad99dc..0000000000
--- a/board/Marvell/db-mv784mp-gp/binary.0
+++ /dev/null
@@ -1,17 +0,0 @@
---------
-WARNING:
---------
-This file should contain the bin_hdr generated by the original Marvell
-U-Boot implementation. As this is currently not included in this
-U-Boot version, we have added this placeholder, so that the U-Boot
-image can be generated without errors.
-
-If you have a known to be working bin_hdr for your board, then you
-just need to replace this text file here with the binary header
-and recompile U-Boot.
-
-In a few weeks, mainline U-Boot will get support to generate the
-bin_hdr with the DDR training code itself. By implementing this code
-as SPL U-Boot. Then this file will not be needed any more and will
-get removed.
-
diff --git a/board/Marvell/db-mv784mp-gp/kwbimage.cfg b/board/Marvell/db-mv784mp-gp/kwbimage.cfg
index d7ef4071dd..cc05792556 100644
--- a/board/Marvell/db-mv784mp-gp/kwbimage.cfg
+++ b/board/Marvell/db-mv784mp-gp/kwbimage.cfg
@@ -9,4 +9,4 @@ VERSION		1
 BOOT_FROM	spi
 
 # Binary Header (bin_hdr) with DDR3 training code
-BINARY board/Marvell/db-mv784mp-gp/binary.0 0000005b 00000068
+BINARY spl/u-boot-spl.bin 0000005b 00000068
diff --git a/board/armltd/vexpress64/Kconfig b/board/armltd/vexpress64/Kconfig
index 7ebea6317f..7d5e7bee8b 100644
--- a/board/armltd/vexpress64/Kconfig
+++ b/board/armltd/vexpress64/Kconfig
@@ -1,4 +1,30 @@
-if TARGET_VEXPRESS_AEMV8A
+if TARGET_VEXPRESS64_AEMV8A
+
+config SYS_BOARD
+	default "vexpress64"
+
+config SYS_VENDOR
+	default "armltd"
+
+config SYS_CONFIG_NAME
+	default "vexpress_aemv8a"
+
+endif
+
+if TARGET_VEXPRESS64_BASE_FVP
+
+config SYS_BOARD
+	default "vexpress64"
+
+config SYS_VENDOR
+	default "armltd"
+
+config SYS_CONFIG_NAME
+	default "vexpress_aemv8a"
+
+endif
+
+if TARGET_VEXPRESS64_JUNO
 
 config SYS_BOARD
 	default "vexpress64"
diff --git a/board/armltd/vexpress64/MAINTAINERS b/board/armltd/vexpress64/MAINTAINERS
index 66c8dffa16..0ba044d7ff 100644
--- a/board/armltd/vexpress64/MAINTAINERS
+++ b/board/armltd/vexpress64/MAINTAINERS
@@ -9,3 +9,8 @@ VEXPRESS_AEMV8A_SEMI BOARD
 M:	Linus Walleij <linus.walleij@linaro.org>
 S:	Maintained
 F:	configs/vexpress_aemv8a_semi_defconfig
+
+JUNO DEVELOPMENT PLATFORM BOARD
+M:	Linus Walleij <linus.walleij@linaro.org>
+S:	Maintained
+F:	configs/vexpress_aemv8a_juno_defconfig
diff --git a/board/atmel/sama5d4_xplained/sama5d4_xplained.c b/board/atmel/sama5d4_xplained/sama5d4_xplained.c
index 2758c5cbcd..bc2aa38b92 100644
--- a/board/atmel/sama5d4_xplained/sama5d4_xplained.c
+++ b/board/atmel/sama5d4_xplained/sama5d4_xplained.c
@@ -10,6 +10,8 @@
 #include <asm/arch/at91_common.h>
 #include <asm/arch/at91_pmc.h>
 #include <asm/arch/at91_rstc.h>
+#include <asm/arch/atmel_mpddrc.h>
+#include <asm/arch/atmel_usba_udc.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/clk.h>
 #include <asm/arch/sama5d3_smc.h>
@@ -294,6 +296,9 @@ int board_init(void)
 #ifdef CONFIG_CMD_USB
 	sama5d4_xplained_usb_hw_init();
 #endif
+#ifdef CONFIG_USB_GADGET_ATMEL_USBA
+	at91_udp_hw_init();
+#endif
 
 	return 0;
 }
@@ -313,5 +318,96 @@ int board_eth_init(bd_t *bis)
 	rc = macb_eth_initialize(0, (void *)ATMEL_BASE_GMAC0, 0x00);
 #endif
 
+#ifdef CONFIG_USB_GADGET_ATMEL_USBA
+	usba_udc_probe(&pdata);
+#ifdef CONFIG_USB_ETH_RNDIS
+	usb_eth_initialize(bis);
+#endif
+#endif
+
 	return rc;
 }
+
+/* SPL */
+#ifdef CONFIG_SPL_BUILD
+void spl_board_init(void)
+{
+#ifdef CONFIG_SYS_USE_MMC
+	sama5d4_xplained_mci1_hw_init();
+#elif CONFIG_SYS_USE_NANDFLASH
+	sama5d4_xplained_nand_hw_init();
+#elif CONFIG_SYS_USE_SERIALFLASH
+	sama5d4_xplained_spi0_hw_init();
+#endif
+}
+
+static void ddr2_conf(struct atmel_mpddr *ddr2)
+{
+	ddr2->md = (ATMEL_MPDDRC_MD_DBW_32_BITS | ATMEL_MPDDRC_MD_DDR2_SDRAM);
+
+	ddr2->cr = (ATMEL_MPDDRC_CR_NC_COL_10 |
+		    ATMEL_MPDDRC_CR_NR_ROW_14 |
+		    ATMEL_MPDDRC_CR_CAS_DDR_CAS3 |
+		    ATMEL_MPDDRC_CR_NB_8BANKS |
+		    ATMEL_MPDDRC_CR_NDQS_DISABLED |
+		    ATMEL_MPDDRC_CR_DECOD_INTERLEAVED |
+		    ATMEL_MPDDRC_CR_UNAL_SUPPORTED);
+
+	ddr2->rtr = 0x2b0;
+
+	ddr2->tpr0 = (8 << ATMEL_MPDDRC_TPR0_TRAS_OFFSET |
+		      3 << ATMEL_MPDDRC_TPR0_TRCD_OFFSET |
+		      3 << ATMEL_MPDDRC_TPR0_TWR_OFFSET |
+		      10 << ATMEL_MPDDRC_TPR0_TRC_OFFSET |
+		      3 << ATMEL_MPDDRC_TPR0_TRP_OFFSET |
+		      2 << ATMEL_MPDDRC_TPR0_TRRD_OFFSET |
+		      2 << ATMEL_MPDDRC_TPR0_TWTR_OFFSET |
+		      2 << ATMEL_MPDDRC_TPR0_TMRD_OFFSET);
+
+	ddr2->tpr1 = (2 << ATMEL_MPDDRC_TPR1_TXP_OFFSET |
+		      200 << ATMEL_MPDDRC_TPR1_TXSRD_OFFSET |
+		      25 << ATMEL_MPDDRC_TPR1_TXSNR_OFFSET |
+		      23 << ATMEL_MPDDRC_TPR1_TRFC_OFFSET);
+
+	ddr2->tpr2 = (7 << ATMEL_MPDDRC_TPR2_TFAW_OFFSET |
+		      2 << ATMEL_MPDDRC_TPR2_TRTP_OFFSET |
+		      3 << ATMEL_MPDDRC_TPR2_TRPA_OFFSET |
+		      2 << ATMEL_MPDDRC_TPR2_TXARDS_OFFSET |
+		      8 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET);
+}
+
+void mem_init(void)
+{
+	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+	struct atmel_mpddr ddr2;
+
+	ddr2_conf(&ddr2);
+
+	/* enable MPDDR clock */
+	at91_periph_clk_enable(ATMEL_ID_MPDDRC);
+	writel(0x4, &pmc->scer);
+
+	/* DDRAM2 Controller initialize */
+	ddr2_init(ATMEL_BASE_DDRCS, &ddr2);
+}
+
+void at91_pmc_init(void)
+{
+	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+	u32 tmp;
+
+	tmp = AT91_PMC_PLLAR_29 |
+	      AT91_PMC_PLLXR_PLLCOUNT(0x3f) |
+	      AT91_PMC_PLLXR_MUL(87) |
+	      AT91_PMC_PLLXR_DIV(1);
+	at91_plla_init(tmp);
+
+	writel(0x0 << 8, &pmc->pllicpr);
+
+	tmp = AT91_PMC_MCKR_H32MXDIV |
+	      AT91_PMC_MCKR_PLLADIV_2 |
+	      AT91_PMC_MCKR_MDIV_3 |
+	      AT91_PMC_MCKR_CSS_PLLA;
+	at91_mck_init(tmp);
+}
+#endif
diff --git a/board/atmel/sama5d4ek/sama5d4ek.c b/board/atmel/sama5d4ek/sama5d4ek.c
index d3039c021a..46e504131c 100644
--- a/board/atmel/sama5d4ek/sama5d4ek.c
+++ b/board/atmel/sama5d4ek/sama5d4ek.c
@@ -10,6 +10,8 @@
 #include <asm/arch/at91_common.h>
 #include <asm/arch/at91_pmc.h>
 #include <asm/arch/at91_rstc.h>
+#include <asm/arch/atmel_mpddrc.h>
+#include <asm/arch/atmel_usba_udc.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/clk.h>
 #include <asm/arch/sama5d3_smc.h>
@@ -293,6 +295,9 @@ int board_init(void)
 #ifdef CONFIG_CMD_USB
 	sama5d4ek_usb_hw_init();
 #endif
+#ifdef CONFIG_USB_GADGET_ATMEL_USBA
+	at91_udp_hw_init();
+#endif
 
 	return 0;
 }
@@ -312,5 +317,96 @@ int board_eth_init(bd_t *bis)
 	rc = macb_eth_initialize(0, (void *)ATMEL_BASE_GMAC0, 0x00);
 #endif
 
+#ifdef CONFIG_USB_GADGET_ATMEL_USBA
+	usba_udc_probe(&pdata);
+#ifdef CONFIG_USB_ETH_RNDIS
+	usb_eth_initialize(bis);
+#endif
+#endif
+
 	return rc;
 }
+
+/* SPL */
+#ifdef CONFIG_SPL_BUILD
+void spl_board_init(void)
+{
+#ifdef CONFIG_SYS_USE_MMC
+	sama5d4ek_mci1_hw_init();
+#elif CONFIG_SYS_USE_NANDFLASH
+	sama5d4ek_nand_hw_init();
+#elif CONFIG_SYS_USE_SERIALFLASH
+	sama5d4ek_spi0_hw_init();
+#endif
+}
+
+static void ddr2_conf(struct atmel_mpddr *ddr2)
+{
+	ddr2->md = (ATMEL_MPDDRC_MD_DBW_32_BITS | ATMEL_MPDDRC_MD_DDR2_SDRAM);
+
+	ddr2->cr = (ATMEL_MPDDRC_CR_NC_COL_10 |
+		    ATMEL_MPDDRC_CR_NR_ROW_14 |
+		    ATMEL_MPDDRC_CR_CAS_DDR_CAS3 |
+		    ATMEL_MPDDRC_CR_NB_8BANKS |
+		    ATMEL_MPDDRC_CR_NDQS_DISABLED |
+		    ATMEL_MPDDRC_CR_DECOD_INTERLEAVED |
+		    ATMEL_MPDDRC_CR_UNAL_SUPPORTED);
+
+	ddr2->rtr = 0x2b0;
+
+	ddr2->tpr0 = (8 << ATMEL_MPDDRC_TPR0_TRAS_OFFSET |
+		      3 << ATMEL_MPDDRC_TPR0_TRCD_OFFSET |
+		      3 << ATMEL_MPDDRC_TPR0_TWR_OFFSET |
+		      10 << ATMEL_MPDDRC_TPR0_TRC_OFFSET |
+		      3 << ATMEL_MPDDRC_TPR0_TRP_OFFSET |
+		      2 << ATMEL_MPDDRC_TPR0_TRRD_OFFSET |
+		      2 << ATMEL_MPDDRC_TPR0_TWTR_OFFSET |
+		      2 << ATMEL_MPDDRC_TPR0_TMRD_OFFSET);
+
+	ddr2->tpr1 = (2 << ATMEL_MPDDRC_TPR1_TXP_OFFSET |
+		      200 << ATMEL_MPDDRC_TPR1_TXSRD_OFFSET |
+		      25 << ATMEL_MPDDRC_TPR1_TXSNR_OFFSET |
+		      23 << ATMEL_MPDDRC_TPR1_TRFC_OFFSET);
+
+	ddr2->tpr2 = (7 << ATMEL_MPDDRC_TPR2_TFAW_OFFSET |
+		      2 << ATMEL_MPDDRC_TPR2_TRTP_OFFSET |
+		      3 << ATMEL_MPDDRC_TPR2_TRPA_OFFSET |
+		      2 << ATMEL_MPDDRC_TPR2_TXARDS_OFFSET |
+		      8 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET);
+}
+
+void mem_init(void)
+{
+	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+	struct atmel_mpddr ddr2;
+
+	ddr2_conf(&ddr2);
+
+	/* enable MPDDR clock */
+	at91_periph_clk_enable(ATMEL_ID_MPDDRC);
+	writel(0x4, &pmc->scer);
+
+	/* DDRAM2 Controller initialize */
+	ddr2_init(ATMEL_BASE_DDRCS, &ddr2);
+}
+
+void at91_pmc_init(void)
+{
+	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+	u32 tmp;
+
+	tmp = AT91_PMC_PLLAR_29 |
+	      AT91_PMC_PLLXR_PLLCOUNT(0x3f) |
+	      AT91_PMC_PLLXR_MUL(87) |
+	      AT91_PMC_PLLXR_DIV(1);
+	at91_plla_init(tmp);
+
+	writel(0x0 << 8, &pmc->pllicpr);
+
+	tmp = AT91_PMC_MCKR_H32MXDIV |
+	      AT91_PMC_MCKR_PLLADIV_2 |
+	      AT91_PMC_MCKR_MDIV_3 |
+	      AT91_PMC_MCKR_CSS_PLLA;
+	at91_mck_init(tmp);
+}
+#endif
diff --git a/board/avionic-design/common/tamonten-ng.c b/board/avionic-design/common/tamonten-ng.c
index 86a0844273..1704627112 100644
--- a/board/avionic-design/common/tamonten-ng.c
+++ b/board/avionic-design/common/tamonten-ng.c
@@ -55,12 +55,12 @@ void pmu_write(uchar reg, uchar data)
 	struct udevice *dev;
 	int ret;
 
-	ret = i2c_get_chip_for_busnum(4, PMU_I2C_ADDRESS, &dev);
+	ret = i2c_get_chip_for_busnum(4, PMU_I2C_ADDRESS, 1, &dev);
 	if (ret) {
 		debug("%s: Cannot find PMIC I2C chip\n", __func__);
 		return;
 	}
-	i2c_write(dev, reg, &data, 1);
+	dm_i2c_write(dev, reg, &data, 1);
 }
 
 /*
diff --git a/board/compulab/cm_fx6/spl.c b/board/compulab/cm_fx6/spl.c
index 6fe937b418..5b4b76f5b7 100644
--- a/board/compulab/cm_fx6/spl.c
+++ b/board/compulab/cm_fx6/spl.c
@@ -313,7 +313,6 @@ void board_init_f(ulong dummy)
 {
 	struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
 
-	gd = &gdata;
 	/*
 	 * We don't use DMA in SPL, but we do need it in U-Boot. U-Boot
 	 * initializes DMA very early (before all board code), so the only
diff --git a/board/dave/PPChameleonEVB/Kconfig b/board/dave/PPChameleonEVB/Kconfig
deleted file mode 100644
index bfe0011649..0000000000
--- a/board/dave/PPChameleonEVB/Kconfig
+++ /dev/null
@@ -1,25 +0,0 @@
-if TARGET_CATCENTER
-
-config SYS_BOARD
-	default "PPChameleonEVB"
-
-config SYS_VENDOR
-	default "dave"
-
-config SYS_CONFIG_NAME
-	default "CATcenter"
-
-endif
-
-if TARGET_PPCHAMELEONEVB
-
-config SYS_BOARD
-	default "PPChameleonEVB"
-
-config SYS_VENDOR
-	default "dave"
-
-config SYS_CONFIG_NAME
-	default "PPChameleonEVB"
-
-endif
diff --git a/board/dave/PPChameleonEVB/MAINTAINERS b/board/dave/PPChameleonEVB/MAINTAINERS
deleted file mode 100644
index d43c6d03f2..0000000000
--- a/board/dave/PPChameleonEVB/MAINTAINERS
+++ /dev/null
@@ -1,20 +0,0 @@
-PPCHAMELEONEVB BOARD
-#M:	-
-S:	Maintained
-F:	board/dave/PPChameleonEVB/
-F:	include/configs/CATcenter.h
-F:	configs/CATcenter_defconfig
-F:	configs/CATcenter_25_defconfig
-F:	configs/CATcenter_33_defconfig
-
-PPCHAMELEONEVB BOARD
-M:	Andrea "llandre" Marson <andrea.marson@dave-tech.it>
-S:	Maintained
-F:	include/configs/PPChameleonEVB.h
-F:	configs/PPChameleonEVB_defconfig
-F:	configs/PPChameleonEVB_BA_25_defconfig
-F:	configs/PPChameleonEVB_BA_33_defconfig
-F:	configs/PPChameleonEVB_HI_25_defconfig
-F:	configs/PPChameleonEVB_HI_33_defconfig
-F:	configs/PPChameleonEVB_ME_25_defconfig
-F:	configs/PPChameleonEVB_ME_33_defconfig
diff --git a/board/dave/PPChameleonEVB/Makefile b/board/dave/PPChameleonEVB/Makefile
deleted file mode 100644
index 31edc4a57d..0000000000
--- a/board/dave/PPChameleonEVB/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= PPChameleonEVB.o flash.o nand.o
diff --git a/board/dave/PPChameleonEVB/PPChameleonEVB.c b/board/dave/PPChameleonEVB/PPChameleonEVB.c
deleted file mode 100644
index c9ab50e126..0000000000
--- a/board/dave/PPChameleonEVB/PPChameleonEVB.c
+++ /dev/null
@@ -1,231 +0,0 @@
-/*
- * (C) Copyright 2003
- * DAVE Srl
- * http://www.dave-tech.it
- * http://www.wawnet.biz
- * mailto:info@wawnet.biz
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <command.h>
-#include <malloc.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-
-int board_early_init_f (void)
-{
-	out32(GPIO0_OR, CONFIG_SYS_NAND0_CE);                 /* set initial outputs     */
-	out32(GPIO0_OR, CONFIG_SYS_NAND1_CE);                 /* set initial outputs     */
-
-	/*
-	 * IRQ 0-15  405GP internally generated; active high; level sensitive
-	 * IRQ 16    405GP internally generated; active low; level sensitive
-	 * IRQ 17-24 RESERVED
-	 * IRQ 25 (EXT IRQ 0)
-	 * IRQ 26 (EXT IRQ 1)
-	 * IRQ 27 (EXT IRQ 2)
-	 * IRQ 28 (EXT IRQ 3)
-	 * IRQ 29 (EXT IRQ 4)
-	 * IRQ 30 (EXT IRQ 5)
-	 * IRQ 31 (EXT IRQ 6)
-	 */
-	mtdcr(UIC0SR, 0xFFFFFFFF);       /* clear all ints */
-	mtdcr(UIC0ER, 0x00000000);       /* disable all ints */
-	mtdcr(UIC0CR, 0x00000000);       /* set all to be non-critical*/
-	mtdcr(UIC0PR, 0xFFFFFF80);       /* set int polarities */
-	mtdcr(UIC0TR, 0x10000000);       /* set int trigger levels */
-	mtdcr(UIC0VCR, 0x00000001);      /* set vect base=0,INT0 highest priority*/
-	mtdcr(UIC0SR, 0xFFFFFFFF);       /* clear all ints */
-
-	/*
-	 * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
-	 */
-#if 1 /* test-only */
-	mtebc (EBC0_CFG, 0xa8400000); /* ebc always driven */
-#else
-	mtebc (EBC0_CFG, 0x28400000); /* ebc in high-z */
-#endif
-	return 0;
-}
-
-/* ------------------------------------------------------------------------- */
-
-int misc_init_f (void)
-{
-	return 0;  /* dummy implementation */
-}
-
-extern flash_info_t flash_info[];	/* info for FLASH chips */
-
-int misc_init_r (void)
-{
-	/* adjust flash start and size as well as the offset */
-	gd->bd->bi_flashstart = 0 - flash_info[0].size;
-	gd->bd->bi_flashoffset= flash_info[0].size - CONFIG_SYS_MONITOR_LEN;
-#if 0
-	volatile unsigned short *fpga_mode =
-		(unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL);
-	volatile unsigned char *duart0_mcr =
-		(unsigned char *)((ulong)DUART0_BA + 4);
-	volatile unsigned char *duart1_mcr =
-		(unsigned char *)((ulong)DUART1_BA + 4);
-
-	bd_t *bd = gd->bd;
-	char *	tmp;                    /* Temporary char pointer      */
-	unsigned char *dst;
-	ulong len = sizeof(fpgadata);
-	int status;
-	int index;
-	int i;
-	unsigned long CPC0_CR0Reg;
-
-	dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
-	if (gunzip (dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
-		printf ("GUNZIP ERROR - must RESET board to recover\n");
-		do_reset (NULL, 0, 0, NULL);
-	}
-
-	status = fpga_boot(dst, len);
-	if (status != 0) {
-		printf("\nFPGA: Booting failed ");
-		switch (status) {
-		case ERROR_FPGA_PRG_INIT_LOW:
-			printf("(Timeout: INIT not low after asserting PROGRAM*)\n ");
-			break;
-		case ERROR_FPGA_PRG_INIT_HIGH:
-			printf("(Timeout: INIT not high after deasserting PROGRAM*)\n ");
-			break;
-		case ERROR_FPGA_PRG_DONE:
-			printf("(Timeout: DONE not high after programming FPGA)\n ");
-			break;
-		}
-
-		/* display infos on fpgaimage */
-		index = 15;
-		for (i=0; i<4; i++) {
-			len = dst[index];
-			printf("FPGA: %s\n", &(dst[index+1]));
-			index += len+3;
-		}
-		putc ('\n');
-		/* delayed reboot */
-		for (i=20; i>0; i--) {
-			printf("Rebooting in %2d seconds \r",i);
-			for (index=0;index<1000;index++)
-				udelay(1000);
-		}
-		putc ('\n');
-		do_reset(NULL, 0, 0, NULL);
-	}
-
-	puts("FPGA:  ");
-
-	/* display infos on fpgaimage */
-	index = 15;
-	for (i=0; i<4; i++) {
-		len = dst[index];
-		printf("%s ", &(dst[index+1]));
-		index += len+3;
-	}
-	putc ('\n');
-
-	free(dst);
-
-	/*
-	 * Reset FPGA via FPGA_DATA pin
-	 */
-	SET_FPGA(FPGA_PRG | FPGA_CLK);
-	udelay(1000); /* wait 1ms */
-	SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);
-	udelay(1000); /* wait 1ms */
-#endif
-
-#if 0
-	/*
-	 * Enable power on PS/2 interface
-	 */
-	*fpga_mode |= CONFIG_SYS_FPGA_CTRL_PS2_RESET;
-
-	/*
-	 * Enable interrupts in exar duart mcr[3]
-	 */
-	*duart0_mcr = 0x08;
-	*duart1_mcr = 0x08;
-#endif
-	return (0);
-}
-
-/*
- * Check Board Identity:
- */
-
-int checkboard (void)
-{
-	char str[64];
-	int i = getenv_f("serial#", str, sizeof(str));
-
-	puts ("Board: ");
-
-	if (i == -1) {
-		puts ("### No HW ID - assuming PPChameleonEVB");
-	} else {
-		puts(str);
-	}
-
-	putc ('\n');
-
-	return 0;
-}
-
-/* ------------------------------------------------------------------------- */
-
-int testdram (void)
-{
-	/* TODO: XXX XXX XXX */
-	printf ("test: 16 MB - ok\n");
-
-	return (0);
-}
-
-/* ------------------------------------------------------------------------- */
-
-#ifdef CONFIG_CFB_CONSOLE
-# ifdef CONFIG_CONSOLE_EXTRA_INFO
-# include <video_fb.h>
-extern GraphicDevice smi;
-
-void video_get_info_str (int line_number, char *info)
-{
-	uint pvr = get_pvr ();
-
-	/* init video info strings for graphic console */
-	switch (line_number) {
-	case 1:
-		switch (pvr) {
-		case PVR_405EP_RB:
-			sprintf (info, " AMCC PowerPC 405EP Rev. B");
-			break;
-		default:
-			sprintf (info, " AMCC PowerPC 405EP Rev. <unknown>");
-			break;
-		}
-		return;
-	case 2:
-		sprintf (info, " DAVE Srl PPChameleonEVB - www.dave-tech.it");
-		return;
-	case 3:
-		sprintf (info, " %s", smi.modeIdent);
-		return;
-	}
-
-	/* no more info lines */
-	*info = 0;
-	return;
-}
-# endif	/* CONFIG_CONSOLE_EXTRA_INFO */
-#endif	/* CONFIG_CFB_CONSOLE */
diff --git a/board/dave/PPChameleonEVB/flash.c b/board/dave/PPChameleonEVB/flash.c
deleted file mode 100644
index 771151b80b..0000000000
--- a/board/dave/PPChameleonEVB/flash.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * (C) Copyright 2001
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/ppc4xx.h>
-#include <asm/processor.h>
-
-/*
- * include common flash code (for esd boards)
- */
-#include "../common/flash.c"
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long * addr, flash_info_t * info);
-static void flash_get_offsets (ulong base, flash_info_t * info);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
-#ifdef __DEBUG_START_FROM_SRAM__
-	return CONFIG_SYS_DUMMY_FLASH_SIZE;
-#else
-	unsigned long size;
-	int i;
-	uint pbcr;
-	unsigned long base;
-	int size_val = 0;
-
-	debug("[%s, %d] Entering ...\n", __FUNCTION__, __LINE__);
-	debug("[%s, %d] flash_info = 0x%p ...\n", __func__, __LINE__,
-						flash_info);
-
-	/* Init: no FLASHes known */
-	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-	}
-
-	/* Static FLASH Bank configuration here - FIXME XXX */
-
-	debug("[%s, %d] Calling flash_get_size ...\n", __FUNCTION__, __LINE__);
-	size = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
-
-	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
-		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
-			size, size<<20);
-	}
-
-	debug("[%s, %d] Test point ...\n", __FUNCTION__, __LINE__);
-
-	/* Setup offsets */
-	flash_get_offsets (-size, &flash_info[0]);
-	debug("[%s, %d] Test point ...\n", __FUNCTION__, __LINE__);
-
-	/* Re-do sizing to get full correct info */
-	mtdcr(EBC0_CFGADDR, PB0CR);
-	pbcr = mfdcr(EBC0_CFGDATA);
-	mtdcr(EBC0_CFGADDR, PB0CR);
-	base = -size;
-	switch (size) {
-	case 1 << 20:
-		size_val = 0;
-		break;
-	case 2 << 20:
-		size_val = 1;
-		break;
-	case 4 << 20:
-		size_val = 2;
-		break;
-	case 8 << 20:
-		size_val = 3;
-		break;
-	case 16 << 20:
-		size_val = 4;
-		break;
-	}
-	pbcr = (pbcr & 0x0001ffff) | base | (size_val << 17);
-	mtdcr(EBC0_CFGDATA, pbcr);
-	debug("[%s, %d] Test point ...\n", __FUNCTION__, __LINE__);
-
-	/* Monitor protection ON by default */
-	(void)flash_protect(FLAG_PROTECT_SET,
-			    -CONFIG_SYS_MONITOR_LEN,
-			    0xffffffff,
-			    &flash_info[0]);
-
-	debug("[%s, %d] Test point ...\n", __FUNCTION__, __LINE__);
-	flash_info[0].size  = size;
-
-	return (size);
-#endif
-}
diff --git a/board/dave/PPChameleonEVB/nand.c b/board/dave/PPChameleonEVB/nand.c
deleted file mode 100644
index a191a0c3a9..0000000000
--- a/board/dave/PPChameleonEVB/nand.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * (C) Copyright 2006 DENX Software Engineering
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-
-#if defined(CONFIG_CMD_NAND)
-
-#include <nand.h>
-
-/*
- * hardware specific access to control-lines
- * function borrowed from Linux 2.6 (drivers/mtd/nand/ppchameleonevb.c)
- */
-static void ppchameleonevb_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
-	struct nand_chip *this = mtd->priv;
-	ulong base = (ulong) this->IO_ADDR_W;
-
-	if (ctrl & NAND_CTRL_CHANGE) {
-		if ( ctrl & NAND_CLE )
-			MACRO_NAND_CTL_SETCLE((unsigned long)base);
-		else
-			MACRO_NAND_CTL_CLRCLE((unsigned long)base);
-		if ( ctrl & NAND_ALE )
-			MACRO_NAND_CTL_CLRCLE((unsigned long)base);
-		else
-			MACRO_NAND_CTL_CLRALE((unsigned long)base);
-		if ( ctrl & NAND_NCE )
-			MACRO_NAND_ENABLE_CE((unsigned long)base);
-		else
-			MACRO_NAND_DISABLE_CE((unsigned long)base);
-	}
-
-	if (cmd != NAND_CMD_NONE)
-		writeb(cmd, this->IO_ADDR_W);
-}
-
-
-/*
- * read device ready pin
- * function +/- borrowed from Linux 2.6 (drivers/mtd/nand/ppchameleonevb.c)
- */
-static int ppchameleonevb_device_ready(struct mtd_info *mtdinfo)
-{
-	struct nand_chip *this = mtdinfo->priv;
-	ulong rb_gpio_pin;
-
-	/* use the base addr to find out which chip are we dealing with */
-	switch((ulong) this->IO_ADDR_W) {
-	case CONFIG_SYS_NAND0_BASE:
-		rb_gpio_pin = CONFIG_SYS_NAND0_RDY;
-		break;
-	case CONFIG_SYS_NAND1_BASE:
-		rb_gpio_pin = CONFIG_SYS_NAND1_RDY;
-		break;
-	default: /* this should never happen */
-		return 0;
-		break;
-	}
-
-	if (in32(GPIO0_IR) & rb_gpio_pin)
-		return 1;
-	return 0;
-}
-
-
-/*
- * Board-specific NAND initialization. The following members of the
- * argument are board-specific (per include/linux/mtd/nand.h):
- * - IO_ADDR_R?: address to read the 8 I/O lines of the flash device
- * - IO_ADDR_W?: address to write the 8 I/O lines of the flash device
- * - cmd_ctrl: hardwarespecific function for accesing control-lines
- * - dev_ready: hardwarespecific function for  accesing device ready/busy line
- * - enable_hwecc?: function to enable (reset)  hardware ecc generator. Must
- *   only be provided if a hardware ECC is available
- * - ecc.mode: mode of ecc, see defines
- * - chip_delay: chip dependent delay for transfering data from array to
- *   read regs (tR)
- * - options: various chip options. They can partly be set to inform
- *   nand_scan about special functionality. See the defines for further
- *   explanation
- * Members with a "?" were not set in the merged testing-NAND branch,
- * so they are not set here either.
- */
-int board_nand_init(struct nand_chip *nand)
-{
-
-	nand->cmd_ctrl = ppchameleonevb_hwcontrol;
-	nand->dev_ready = ppchameleonevb_device_ready;
-	nand->ecc.mode = NAND_ECC_SOFT;
-	nand->chip_delay = NAND_BIG_DELAY_US;
-	nand->options = NAND_SAMSUNG_LP_OPTIONS;
-	return 0;
-}
-#endif
diff --git a/board/dave/PPChameleonEVB/u-boot.lds b/board/dave/PPChameleonEVB/u-boot.lds
deleted file mode 100644
index 94b7076148..0000000000
--- a/board/dave/PPChameleonEVB/u-boot.lds
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * Copyright 2007-2009 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include "config.h"
-
-#ifndef RESET_VECTOR_ADDRESS
-#define RESET_VECTOR_ADDRESS	0xfffffffc
-#endif
-
-OUTPUT_ARCH(powerpc)
-
-PHDRS
-{
-  text PT_LOAD;
-  bss PT_LOAD;
-}
-
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .text      :
-  {
-    *(.text*)
-   } :text
-    _etext = .;
-    PROVIDE (etext = .);
-    .rodata    :
-   {
-    *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
-  } :text
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    _GOT2_TABLE_ = .;
-    KEEP(*(.got2))
-    KEEP(*(.got))
-    PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
-    _FIXUP_TABLE_ = .;
-    KEEP(*(.fixup))
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
-  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
-  .data    :
-  {
-    *(.data*)
-    *(.sdata*)
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-
-  . = ALIGN(4);
-  .u_boot_list : {
-	KEEP(*(SORT(.u_boot_list*)));
-  }
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN and CONFIG_SYS_TEXT_BASE may need to be modified.");
-  . = 0xFFFF8000;
-  .ppcenv :
-  {
-    common/env_embedded.o(.ppcenv);
-  }
-
-  .resetvec RESET_VECTOR_ADDRESS :
-  {
-    KEEP(*(.resetvec))
-  } :text = 0xffff
-
-  . = RESET_VECTOR_ADDRESS + 0x4;
-
-  /*
-   * Make sure that the bss segment isn't linked at 0x0, otherwise its
-   * address won't be updated during relocation fixups.  Note that
-   * this is a temporary fix.  Code to dynamically the fixup the bss
-   * location will be added in the future.  When the bss relocation
-   * fixup code is present this workaround should be removed.
-   */
-#if (RESET_VECTOR_ADDRESS == 0xfffffffc)
-  . |= 0x10;
-#endif
-
-  __bss_start = .;
-  .bss (NOLOAD)       :
-  {
-   *(.bss*)
-   *(.sbss*)
-   *(COMMON)
-  } :bss
-
-  . = ALIGN(4);
-  __bss_end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/esd/cpci5200/Kconfig b/board/esd/cpci5200/Kconfig
deleted file mode 100644
index ddd9418d3d..0000000000
--- a/board/esd/cpci5200/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_CPCI5200
-
-config SYS_BOARD
-	default "cpci5200"
-
-config SYS_VENDOR
-	default "esd"
-
-config SYS_CONFIG_NAME
-	default "cpci5200"
-
-endif
diff --git a/board/esd/cpci5200/MAINTAINERS b/board/esd/cpci5200/MAINTAINERS
deleted file mode 100644
index 184d3cc428..0000000000
--- a/board/esd/cpci5200/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-CPCI5200 BOARD
-M:	Reinhard Arlt <reinhard.arlt@esd-electronics.com>
-S:	Maintained
-F:	board/esd/cpci5200/
-F:	include/configs/cpci5200.h
-F:	configs/cpci5200_defconfig
diff --git a/board/esd/cpci5200/Makefile b/board/esd/cpci5200/Makefile
deleted file mode 100644
index 8421f54869..0000000000
--- a/board/esd/cpci5200/Makefile
+++ /dev/null
@@ -1,14 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-# Objects for Xilinx JTAG programming (CPLD)
-# CPLD  = ../common/xilinx_jtag/lenval.o \
-#	  ../common/xilinx_jtag/micro.o \
-#	  ../common/xilinx_jtag/ports.o
-
-# obj-y	= cpci5200.o flash.o $(CPLD)
-obj-y	= cpci5200.o strataflash.o
diff --git a/board/esd/cpci5200/cpci5200.c b/board/esd/cpci5200/cpci5200.c
deleted file mode 100644
index 8bded0bbca..0000000000
--- a/board/esd/cpci5200/cpci5200.c
+++ /dev/null
@@ -1,284 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * cpci5200.c - main board support/init for the esd cpci5200.
- */
-
-#include <common.h>
-#include <mpc5xxx.h>
-#include <pci.h>
-#include <command.h>
-#include <netdev.h>
-
-#include "mt46v16m16-75.h"
-
-void init_ata_reset(void);
-
-static void sdram_start(int hi_addr)
-{
-	long hi_addr_bit = hi_addr ? 0x01000000 : 0;
-
-	/* unlock mode register */
-	*(vu_long *) MPC5XXX_SDRAM_CTRL =
-	    SDRAM_CONTROL | 0x80000000 | hi_addr_bit;
-	__asm__ volatile ("sync");
-
-	/* precharge all banks */
-	*(vu_long *) MPC5XXX_SDRAM_CTRL =
-	    SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
-	__asm__ volatile ("sync");
-
-	/* set mode register: extended mode */
-	*(vu_long *) MPC5XXX_SDRAM_MODE = SDRAM_EMODE;
-	__asm__ volatile ("sync");
-
-	/* set mode register: reset DLL */
-	*(vu_long *) MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000;
-	__asm__ volatile ("sync");
-
-	/* precharge all banks */
-	*(vu_long *) MPC5XXX_SDRAM_CTRL =
-	    SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
-	__asm__ volatile ("sync");
-
-	/* auto refresh */
-	*(vu_long *) MPC5XXX_SDRAM_CTRL =
-	    SDRAM_CONTROL | 0x80000004 | hi_addr_bit;
-	__asm__ volatile ("sync");
-
-	/* set mode register */
-	*(vu_long *) MPC5XXX_SDRAM_MODE = SDRAM_MODE;
-	__asm__ volatile ("sync");
-
-	/* normal operation */
-	*(vu_long *) MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
-	__asm__ volatile ("sync");
-}
-
-/*
- * ATTENTION: Although partially referenced initdram does NOT make real use
- *            use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
- *            is something else than 0x00000000.
- */
-
-phys_size_t initdram(int board_type)
-{
-	ulong dramsize = 0;
-	ulong test1, test2;
-
-	/* setup SDRAM chip selects */
-	*(vu_long *) MPC5XXX_SDRAM_CS0CFG = 0x0000001e;	/* 2G at 0x0 */
-	*(vu_long *) MPC5XXX_SDRAM_CS1CFG = 0x80000000;	/* disabled */
-	__asm__ volatile ("sync");
-
-	/* setup config registers */
-	*(vu_long *) MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
-	*(vu_long *) MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
-	__asm__ volatile ("sync");
-
-	/* set tap delay */
-	*(vu_long *) MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY;
-	__asm__ volatile ("sync");
-
-	/* find RAM size using SDRAM CS0 only */
-	sdram_start(0);
-	test1 = get_ram_size((long *) CONFIG_SYS_SDRAM_BASE, 0x80000000);
-	sdram_start(1);
-	test2 = get_ram_size((long *) CONFIG_SYS_SDRAM_BASE, 0x80000000);
-
-	if (test1 > test2) {
-		sdram_start(0);
-		dramsize = test1;
-	} else {
-		dramsize = test2;
-	}
-
-	/* memory smaller than 1MB is impossible */
-	if (dramsize < (1 << 20)) {
-		dramsize = 0;
-	}
-
-	/* set SDRAM CS0 size according to the amount of RAM found */
-	if (dramsize > 0) {
-		*(vu_long *) MPC5XXX_SDRAM_CS0CFG =
-		    0x13 + __builtin_ffs(dramsize >> 20) - 1;
-		/* let SDRAM CS1 start right after CS0 */
-		*(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;	/* 2G */
-	} else {
-#if 0
-		*(vu_long *) MPC5XXX_SDRAM_CS0CFG = 0;	/* disabled */
-		/* let SDRAM CS1 start right after CS0 */
-		*(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;	/* 2G */
-#else
-		*(vu_long *) MPC5XXX_SDRAM_CS0CFG =
-		    0x13 + __builtin_ffs(0x08000000 >> 20) - 1;
-		/* let SDRAM CS1 start right after CS0 */
-		*(vu_long *) MPC5XXX_SDRAM_CS1CFG = 0x08000000 + 0x0000001e;	/* 2G */
-#endif
-	}
-
-#if 0
-	/* find RAM size using SDRAM CS1 only */
-	sdram_start(0);
-	get_ram_size((ulong *) (CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
-	sdram_start(1);
-	get_ram_size((ulong *) (CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
-	sdram_start(0);
-#endif
-	/* set SDRAM CS1 size according to the amount of RAM found */
-
-	*(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize;	/* disabled */
-
-	init_ata_reset();
-	return (dramsize);
-}
-
-int checkboard(void)
-{
-	puts("Board: esd CPCI5200 (cpci5200)\n");
-	return 0;
-}
-
-void flash_preinit(void)
-{
-	/*
-	 * Now, when we are in RAM, enable flash write
-	 * access for detection process.
-	 * Note that CS_BOOT cannot be cleared when
-	 * executing in flash.
-	 */
-	*(vu_long *) MPC5XXX_BOOTCS_CFG &= ~0x1;	/* clear RO */
-}
-
-void flash_afterinit(ulong size)
-{
-	if (size == 0x02000000) {
-		/* adjust mapping */
-		*(vu_long *) MPC5XXX_BOOTCS_START =
-		    *(vu_long *) MPC5XXX_CS0_START =
-		    START_REG(CONFIG_SYS_BOOTCS_START | size);
-		*(vu_long *) MPC5XXX_BOOTCS_STOP =
-		    *(vu_long *) MPC5XXX_CS0_STOP =
-		    STOP_REG(CONFIG_SYS_BOOTCS_START | size, size);
-	}
-}
-
-#ifdef	CONFIG_PCI
-static struct pci_controller hose;
-
-extern void pci_mpc5xxx_init(struct pci_controller *);
-
-void pci_init_board(void) {
-	pci_mpc5xxx_init(&hose);
-}
-#endif
-
-#if defined(CONFIG_CMD_IDE) && defined (CONFIG_IDE_RESET)
-
-void init_ide_reset(void)
-{
-	debug("init_ide_reset\n");
-
-	/* Configure PSC1_4 as GPIO output for ATA reset */
-	*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC1_4;
-	*(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_PSC1_4;
-}
-
-void ide_set_reset(int idereset)
-{
-	debug("ide_reset(%d)\n", idereset);
-
-	if (idereset) {
-		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4;
-	} else {
-		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4;
-	}
-}
-#endif
-
-#define MPC5XXX_SIMPLEIO_GPIO_ENABLE       (MPC5XXX_GPIO + 0x0004)
-#define MPC5XXX_SIMPLEIO_GPIO_DIR          (MPC5XXX_GPIO + 0x000C)
-#define MPC5XXX_SIMPLEIO_GPIO_DATA_OUTPUT  (MPC5XXX_GPIO + 0x0010)
-#define MPC5XXX_SIMPLEIO_GPIO_DATA_INPUT   (MPC5XXX_GPIO + 0x0014)
-
-#define MPC5XXX_INTERRUPT_GPIO_ENABLE      (MPC5XXX_GPIO + 0x0020)
-#define MPC5XXX_INTERRUPT_GPIO_DIR         (MPC5XXX_GPIO + 0x0028)
-#define MPC5XXX_INTERRUPT_GPIO_DATA_OUTPUT (MPC5XXX_GPIO + 0x002C)
-#define MPC5XXX_INTERRUPT_GPIO_STATUS      (MPC5XXX_GPIO + 0x003C)
-
-#define GPIO_WU6	0x40000000UL
-#define GPIO_USB0       0x00010000UL
-#define GPIO_USB9       0x08000000UL
-#define GPIO_USB9S      0x00080000UL
-
-void init_ata_reset(void)
-{
-	debug("init_ata_reset\n");
-
-	/* Configure GPIO_WU6 as GPIO output for ATA reset */
-	*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_WU6;
-	*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_WU6;
-	*(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_WU6;
-	__asm__ volatile ("sync");
-
-	*(vu_long *) MPC5XXX_SIMPLEIO_GPIO_DATA_OUTPUT &= ~GPIO_USB0;
-	*(vu_long *) MPC5XXX_SIMPLEIO_GPIO_ENABLE |= GPIO_USB0;
-	*(vu_long *) MPC5XXX_SIMPLEIO_GPIO_DIR |= GPIO_USB0;
-	__asm__ volatile ("sync");
-
-	*(vu_long *) MPC5XXX_INTERRUPT_GPIO_DATA_OUTPUT &= ~GPIO_USB9;
-	*(vu_long *) MPC5XXX_INTERRUPT_GPIO_ENABLE &= ~GPIO_USB9;
-	__asm__ volatile ("sync");
-
-	if ((*(vu_long *) MPC5XXX_INTERRUPT_GPIO_STATUS & GPIO_USB9S) == 0) {
-		*(vu_long *) MPC5XXX_SIMPLEIO_GPIO_DATA_OUTPUT |= GPIO_USB0;
-		__asm__ volatile ("sync");
-	}
-}
-
-int board_eth_init(bd_t *bis)
-{
-	return pci_eth_init(bis);
-}
-
-int do_writepci(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
-{
-	unsigned int addr;
-	unsigned int size;
-	int i;
-	volatile unsigned long *ptr;
-
-	addr = simple_strtol(argv[1], NULL, 16);
-	size = simple_strtol(argv[2], NULL, 16);
-
-	printf("\nWriting at addr %08x, size %08x.\n", addr, size);
-
-	while (1) {
-		ptr = (volatile unsigned long *)addr;
-		for (i = 0; i < (size >> 2); i++) {
-			*ptr++ = i;
-		}
-
-		/* Abort if ctrl-c was pressed */
-		if (ctrlc()) {
-			puts("\nAbort\n");
-			return 0;
-		}
-		putc('.');
-	}
-	return 0;
-}
-
-U_BOOT_CMD(writepci, 3, 1, do_writepci,
-	   "Write some data to pcibus",
-	   "<addr> <size>\n"
-	   ""
-);
diff --git a/board/esd/cpci5200/mt46v16m16-75.h b/board/esd/cpci5200/mt46v16m16-75.h
deleted file mode 100644
index 63a403231d..0000000000
--- a/board/esd/cpci5200/mt46v16m16-75.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#define SDRAM_DDR	1	/* is DDR */
-
-/* Settings for XLB = 132 MHz */
-#define SDRAM_MODE	0x018D0000
-#define SDRAM_EMODE	0x40090000
-#define SDRAM_CONTROL	0x705f0f00
-#define SDRAM_CONFIG1	0x73722930
-#define SDRAM_CONFIG2	0x47770000
-#define SDRAM_TAPDELAY	0x10000000
diff --git a/board/esd/cpci5200/strataflash.c b/board/esd/cpci5200/strataflash.c
deleted file mode 100644
index 7dc2e58c12..0000000000
--- a/board/esd/cpci5200/strataflash.c
+++ /dev/null
@@ -1,786 +0,0 @@
-/*
- * (C) Copyright 2002
- * Brad Kemp, Seranoa Networks, Brad.Kemp@seranoa.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/cache.h>
-
-#undef  DEBUG_FLASH
-/*
- * This file implements a Common Flash Interface (CFI) driver for U-Boot.
- * The width of the port and the width of the chips are determined at initialization.
- * These widths are used to calculate the address for access CFI data structures.
- * It has been tested on an Intel Strataflash implementation.
- *
- * References
- * JEDEC Standard JESD68 - Common Flash Interface (CFI)
- * JEDEC Standard JEP137-A Common Flash Interface (CFI) ID Codes
- * Intel Application Note 646 Common Flash Interface (CFI) and Command Sets
- * Intel 290667-008 3 Volt Intel StrataFlash Memory datasheet
- *
- * TODO
- * Use Primary Extended Query table (PRI) and Alternate Algorithm Query Table (ALT) to determine if protection is available
- * Add support for other command sets Use the PRI and ALT to determine command set
- * Verify erase and program timeouts.
- */
-
-#define FLASH_CMD_CFI			0x98
-#define FLASH_CMD_READ_ID		0x90
-#define FLASH_CMD_RESET			0xff
-#define FLASH_CMD_BLOCK_ERASE		0x20
-#define FLASH_CMD_ERASE_CONFIRM		0xD0
-#define FLASH_CMD_WRITE			0x40
-#define FLASH_CMD_PROTECT		0x60
-#define FLASH_CMD_PROTECT_SET		0x01
-#define FLASH_CMD_PROTECT_CLEAR		0xD0
-#define FLASH_CMD_CLEAR_STATUS		0x50
-#define FLASH_CMD_WRITE_TO_BUFFER       0xE8
-#define FLASH_CMD_WRITE_BUFFER_CONFIRM  0xD0
-
-#define FLASH_STATUS_DONE		0x80
-#define FLASH_STATUS_ESS		0x40
-#define FLASH_STATUS_ECLBS		0x20
-#define FLASH_STATUS_PSLBS		0x10
-#define FLASH_STATUS_VPENS		0x08
-#define FLASH_STATUS_PSS		0x04
-#define FLASH_STATUS_DPS		0x02
-#define FLASH_STATUS_R			0x01
-#define FLASH_STATUS_PROTECT		0x01
-
-#define FLASH_OFFSET_CFI		0x55
-#define FLASH_OFFSET_CFI_RESP		0x10
-#define FLASH_OFFSET_WTOUT		0x1F
-#define FLASH_OFFSET_WBTOUT             0x20
-#define FLASH_OFFSET_ETOUT		0x21
-#define FLASH_OFFSET_CETOUT             0x22
-#define FLASH_OFFSET_WMAX_TOUT		0x23
-#define FLASH_OFFSET_WBMAX_TOUT         0x24
-#define FLASH_OFFSET_EMAX_TOUT		0x25
-#define FLASH_OFFSET_CEMAX_TOUT         0x26
-#define FLASH_OFFSET_SIZE		0x27
-#define FLASH_OFFSET_INTERFACE          0x28
-#define FLASH_OFFSET_BUFFER_SIZE        0x2A
-#define FLASH_OFFSET_NUM_ERASE_REGIONS	0x2C
-#define FLASH_OFFSET_ERASE_REGIONS	0x2D
-#define FLASH_OFFSET_PROTECT		0x02
-#define FLASH_OFFSET_USER_PROTECTION    0x85
-#define FLASH_OFFSET_INTEL_PROTECTION   0x81
-
-#define FLASH_MAN_CFI			0x01000000
-
-typedef union {
-	unsigned char c;
-	unsigned short w;
-	unsigned long l;
-} cfiword_t;
-
-typedef union {
-	unsigned char *cp;
-	unsigned short *wp;
-	unsigned long *lp;
-} cfiptr_t;
-
-#define NUM_ERASE_REGIONS 4
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips        */
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-
-static void flash_add_byte(flash_info_t * info, cfiword_t * cword, uchar c);
-static void flash_make_cmd(flash_info_t * info, uchar cmd, void *cmdbuf);
-static void flash_write_cmd(flash_info_t * info, int sect, uchar offset,
-			    uchar cmd);
-static int flash_isequal(flash_info_t * info, int sect, uchar offset,
-			 uchar cmd);
-static int flash_isset(flash_info_t * info, int sect, uchar offset, uchar cmd);
-static int flash_detect_cfi(flash_info_t * info);
-static ulong flash_get_size(ulong base, int banknum);
-static int flash_write_cfiword(flash_info_t * info, ulong dest,
-			       cfiword_t cword);
-static int flash_full_status_check(flash_info_t * info, ulong sector,
-				   ulong tout, char *prompt);
-#ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
-static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp,
-				 int len);
-#endif
-/*-----------------------------------------------------------------------
- * create an address based on the offset and the port width
- */
-inline uchar *flash_make_addr(flash_info_t * info, int sect, int offset)
-{
-	return ((uchar *) (info->start[sect] + (offset * info->portwidth)));
-}
-
-/*-----------------------------------------------------------------------
- * read a character at a port width address
- */
-inline uchar flash_read_uchar(flash_info_t * info, uchar offset)
-{
-	uchar *cp;
-	cp = flash_make_addr(info, 0, offset);
-	return (cp[info->portwidth - 1]);
-}
-
-/*-----------------------------------------------------------------------
- * read a short word by swapping for ppc format.
- */
-ushort flash_read_ushort(flash_info_t * info, int sect, uchar offset)
-{
-	uchar *addr;
-
-	addr = flash_make_addr(info, sect, offset);
-	return ((addr[(2 * info->portwidth) - 1] << 8) |
-		addr[info->portwidth - 1]);
-
-}
-
-/*-----------------------------------------------------------------------
- * read a long word by picking the least significant byte of each maiximum
- * port size word. Swap for ppc format.
- */
-ulong flash_read_long(flash_info_t * info, int sect, uchar offset)
-{
-	uchar *addr;
-
-	addr = flash_make_addr(info, sect, offset);
-	return ((addr[(2 * info->portwidth) - 1] << 24) |
-		(addr[(info->portwidth) - 1] << 16) |
-		(addr[(4 * info->portwidth) - 1] << 8) |
-		addr[(3 * info->portwidth) - 1]);
-
-}
-
-/*-----------------------------------------------------------------------
- */
-unsigned long flash_init(void)
-{
-	unsigned long size;
-	int i;
-	unsigned long address;
-
-	/* The flash is positioned back to back, with the demultiplexing of the chip
-	 * based on the A24 address line.
-	 *
-	 */
-
-	address = CONFIG_SYS_FLASH_BASE;
-	size = 0;
-
-	/* Init: no FLASHes known */
-	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-		size += flash_info[i].size = flash_get_size(address, i);
-		address += CONFIG_SYS_FLASH_INCREMENT;
-		if (flash_info[i].flash_id == FLASH_UNKNOWN) {
-			printf
-			    ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
-			     i, flash_info[0].size, flash_info[i].size << 20);
-		}
-	}
-
-#if 0				/* test-only */
-	/* Monitor protection ON by default */
-#if (CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE)
-	for (i = 0;
-	     flash_info[0].start[i] < CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1;
-	     i++)
-		(void)flash_real_protect(&flash_info[0], i, 1);
-#endif
-#endif
-
-	return (size);
-}
-
-/*-----------------------------------------------------------------------
- */
-int flash_erase(flash_info_t * info, int s_first, int s_last)
-{
-	int rcode = 0;
-	int prot;
-	int sect;
-
-	if (info->flash_id != FLASH_MAN_CFI) {
-		printf("Can't erase unknown flash type - aborted\n");
-		return 1;
-	}
-	if ((s_first < 0) || (s_first > s_last)) {
-		printf("- no sectors to erase\n");
-		return 1;
-	}
-
-	prot = 0;
-	for (sect = s_first; sect <= s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-	if (prot) {
-		printf("- Warning: %d protected sectors will not be erased!\n",
-		       prot);
-	} else {
-		printf("\n");
-	}
-
-	for (sect = s_first; sect <= s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-			flash_write_cmd(info, sect, 0, FLASH_CMD_CLEAR_STATUS);
-			flash_write_cmd(info, sect, 0, FLASH_CMD_BLOCK_ERASE);
-			flash_write_cmd(info, sect, 0, FLASH_CMD_ERASE_CONFIRM);
-
-			if (flash_full_status_check
-			    (info, sect, info->erase_blk_tout, "erase")) {
-				rcode = 1;
-			} else
-				printf(".");
-		}
-	}
-	printf(" done\n");
-	return rcode;
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info(flash_info_t * info)
-{
-	int i;
-
-	if (info->flash_id != FLASH_MAN_CFI) {
-		printf("missing or unknown FLASH type\n");
-		return;
-	}
-
-	printf("CFI conformant FLASH (%d x %d)",
-	       (info->portwidth << 3), (info->chipwidth << 3));
-	printf("  Size: %ld MB in %d Sectors\n",
-	       info->size >> 20, info->sector_count);
-	printf
-	    (" Erase timeout %ld ms, write timeout %ld ms, buffer write timeout %ld ms, buffer size %d\n",
-	     info->erase_blk_tout, info->write_tout, info->buffer_write_tout,
-	     info->buffer_size);
-
-	printf("  Sector Start Addresses:");
-	for (i = 0; i < info->sector_count; ++i) {
-		if ((i % 5) == 0)
-			printf("\n");
-		printf(" %08lX%5s",
-		       info->start[i], info->protect[i] ? " (RO)" : " ");
-	}
-	printf("\n");
-	return;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
-	ulong wp;
-	ulong cp;
-	int aln;
-	cfiword_t cword;
-	int i, rc;
-
-	/* get lower aligned address */
-	wp = (addr & ~(info->portwidth - 1));
-
-	/* handle unaligned start */
-	if ((aln = addr - wp) != 0) {
-		cword.l = 0;
-		cp = wp;
-		for (i = 0; i < aln; ++i, ++cp)
-			flash_add_byte(info, &cword, (*(uchar *) cp));
-
-		for (; (i < info->portwidth) && (cnt > 0); i++) {
-			flash_add_byte(info, &cword, *src++);
-			cnt--;
-			cp++;
-		}
-		for (; (cnt == 0) && (i < info->portwidth); ++i, ++cp)
-			flash_add_byte(info, &cword, (*(uchar *) cp));
-		if ((rc = flash_write_cfiword(info, wp, cword)) != 0)
-			return rc;
-		wp = cp;
-	}
-#ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
-	while (cnt >= info->portwidth) {
-		i = info->buffer_size > cnt ? cnt : info->buffer_size;
-		if ((rc = flash_write_cfibuffer(info, wp, src, i)) != ERR_OK)
-			return rc;
-		wp += i;
-		src += i;
-		cnt -= i;
-	}
-#else
-	/* handle the aligned part */
-	while (cnt >= info->portwidth) {
-		cword.l = 0;
-		for (i = 0; i < info->portwidth; i++) {
-			flash_add_byte(info, &cword, *src++);
-		}
-		if ((rc = flash_write_cfiword(info, wp, cword)) != 0)
-			return rc;
-		wp += info->portwidth;
-		cnt -= info->portwidth;
-	}
-#endif				/* CONFIG_SYS_FLASH_USE_BUFFER_WRITE */
-	if (cnt == 0) {
-		return (0);
-	}
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	cword.l = 0;
-	for (i = 0, cp = wp; (i < info->portwidth) && (cnt > 0); ++i, ++cp) {
-		flash_add_byte(info, &cword, *src++);
-		--cnt;
-	}
-	for (; i < info->portwidth; ++i, ++cp) {
-		flash_add_byte(info, &cword, (*(uchar *) cp));
-	}
-
-	return flash_write_cfiword(info, wp, cword);
-}
-
-/*-----------------------------------------------------------------------
- */
-int flash_real_protect(flash_info_t * info, long sector, int prot)
-{
-	int retcode = 0;
-
-	flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS);
-	flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT);
-	if (prot)
-		flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT_SET);
-	else
-		flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT_CLEAR);
-
-	if ((retcode =
-	     flash_full_status_check(info, sector, info->erase_blk_tout,
-				     prot ? "protect" : "unprotect")) == 0) {
-
-		info->protect[sector] = prot;
-		/* Intel's unprotect unprotects all locking */
-		if (prot == 0) {
-			int i;
-			for (i = 0; i < info->sector_count; i++) {
-				if (info->protect[i])
-					flash_real_protect(info, i, 1);
-			}
-		}
-	}
-
-	return retcode;
-}
-
-/*-----------------------------------------------------------------------
- *  wait for XSR.7 to be set. Time out with an error if it does not.
- *  This routine does not set the flash to read-array mode.
- */
-static int flash_status_check(flash_info_t * info, ulong sector, ulong tout,
-			      char *prompt)
-{
-	ulong start;
-
-	/* Wait for command completion */
-	start = get_timer(0);
-	while (!flash_isset(info, sector, 0, FLASH_STATUS_DONE)) {
-		if (get_timer(start) > info->erase_blk_tout) {
-			printf("Flash %s timeout at address %lx\n", prompt,
-			       info->start[sector]);
-			flash_write_cmd(info, sector, 0, FLASH_CMD_RESET);
-			return ERR_TIMOUT;
-		}
-	}
-	return ERR_OK;
-}
-
-/*-----------------------------------------------------------------------
- * Wait for XSR.7 to be set, if it times out print an error, otherwise do a full status check.
- * This routine sets the flash to read-array mode.
- */
-static int flash_full_status_check(flash_info_t * info, ulong sector,
-				   ulong tout, char *prompt)
-{
-	int retcode;
-	retcode = flash_status_check(info, sector, tout, prompt);
-	if ((retcode == ERR_OK)
-	    && !flash_isequal(info, sector, 0, FLASH_STATUS_DONE)) {
-		retcode = ERR_INVAL;
-		printf("Flash %s error at address %lx\n", prompt,
-		       info->start[sector]);
-		if (flash_isset
-		    (info, sector, 0,
-		     FLASH_STATUS_ECLBS | FLASH_STATUS_PSLBS)) {
-			printf("Command Sequence Error.\n");
-		} else if (flash_isset(info, sector, 0, FLASH_STATUS_ECLBS)) {
-			printf("Block Erase Error.\n");
-			retcode = ERR_NOT_ERASED;
-		} else if (flash_isset(info, sector, 0, FLASH_STATUS_PSLBS)) {
-			printf("Locking Error\n");
-		}
-		if (flash_isset(info, sector, 0, FLASH_STATUS_DPS)) {
-			printf("Block locked.\n");
-			retcode = ERR_PROTECTED;
-		}
-		if (flash_isset(info, sector, 0, FLASH_STATUS_VPENS))
-			printf("Vpp Low Error.\n");
-	}
-	flash_write_cmd(info, sector, 0, FLASH_CMD_RESET);
-	return retcode;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_add_byte(flash_info_t * info, cfiword_t * cword, uchar c)
-{
-	switch (info->portwidth) {
-	case FLASH_CFI_8BIT:
-		cword->c = c;
-		break;
-	case FLASH_CFI_16BIT:
-		cword->w = (cword->w << 8) | c;
-		break;
-	case FLASH_CFI_32BIT:
-		cword->l = (cword->l << 8) | c;
-	}
-}
-
-/*-----------------------------------------------------------------------
- * make a proper sized command based on the port and chip widths
- */
-static void flash_make_cmd(flash_info_t * info, uchar cmd, void *cmdbuf)
-{
-	int i;
-	uchar *cp = (uchar *) cmdbuf;
-	for (i = 0; i < info->portwidth; i++)
-		*cp++ = ((i + 1) % info->chipwidth) ? '\0' : cmd;
-}
-
-/*
- * Write a proper sized command to the correct address
- */
-static void flash_write_cmd(flash_info_t * info, int sect, uchar offset,
-			    uchar cmd)
-{
-
-	volatile cfiptr_t addr;
-	cfiword_t cword;
-	addr.cp = flash_make_addr(info, sect, offset);
-	flash_make_cmd(info, cmd, &cword);
-	switch (info->portwidth) {
-	case FLASH_CFI_8BIT:
-		*addr.cp = cword.c;
-		break;
-	case FLASH_CFI_16BIT:
-		*addr.wp = cword.w;
-		break;
-	case FLASH_CFI_32BIT:
-		*addr.lp = cword.l;
-		break;
-	}
-}
-
-/*-----------------------------------------------------------------------
- */
-static int flash_isequal(flash_info_t * info, int sect, uchar offset, uchar cmd)
-{
-	cfiptr_t cptr;
-	cfiword_t cword;
-	int retval;
-	cptr.cp = flash_make_addr(info, sect, offset);
-	flash_make_cmd(info, cmd, &cword);
-	switch (info->portwidth) {
-	case FLASH_CFI_8BIT:
-		retval = (cptr.cp[0] == cword.c);
-		break;
-	case FLASH_CFI_16BIT:
-		retval = (cptr.wp[0] == cword.w);
-		break;
-	case FLASH_CFI_32BIT:
-		retval = (cptr.lp[0] == cword.l);
-		break;
-	default:
-		retval = 0;
-		break;
-	}
-	return retval;
-}
-
-/*-----------------------------------------------------------------------
- */
-static int flash_isset(flash_info_t * info, int sect, uchar offset, uchar cmd)
-{
-	cfiptr_t cptr;
-	cfiword_t cword;
-	int retval;
-	cptr.cp = flash_make_addr(info, sect, offset);
-	flash_make_cmd(info, cmd, &cword);
-	switch (info->portwidth) {
-	case FLASH_CFI_8BIT:
-		retval = ((cptr.cp[0] & cword.c) == cword.c);
-		break;
-	case FLASH_CFI_16BIT:
-		retval = ((cptr.wp[0] & cword.w) == cword.w);
-		break;
-	case FLASH_CFI_32BIT:
-		retval = ((cptr.lp[0] & cword.l) == cword.l);
-		break;
-	default:
-		retval = 0;
-		break;
-	}
-	return retval;
-}
-
-/*-----------------------------------------------------------------------
- * detect if flash is compatible with the Common Flash Interface (CFI)
- * http://www.jedec.org/download/search/jesd68.pdf
- *
- */
-static int flash_detect_cfi(flash_info_t * info)
-{
-
-	for (info->portwidth = FLASH_CFI_8BIT;
-	     info->portwidth <= FLASH_CFI_32BIT; info->portwidth <<= 1) {
-		for (info->chipwidth = FLASH_CFI_BY8;
-		     info->chipwidth <= info->portwidth;
-		     info->chipwidth <<= 1) {
-			flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
-			flash_write_cmd(info, 0, FLASH_OFFSET_CFI,
-					FLASH_CMD_CFI);
-			if (flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP, 'Q')
-			    && flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP + 1,
-					     'R')
-			    && flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP + 2,
-					     'Y'))
-				return 1;
-		}
-	}
-	return 0;
-}
-
-/*
- * The following code cannot be run from FLASH!
- *
- */
-static ulong flash_get_size(ulong base, int banknum)
-{
-	flash_info_t *info = &flash_info[banknum];
-	int i, j;
-	int sect_cnt;
-	unsigned long sector;
-	unsigned long tmp;
-	int size_ratio = 0;
-	uchar num_erase_regions;
-	int erase_region_size;
-	int erase_region_count;
-
-	info->start[0] = base;
-#if 0
-	invalidate_dcache_range(base, base + 0x400);
-#endif
-	if (flash_detect_cfi(info)) {
-
-		size_ratio = info->portwidth / info->chipwidth;
-		num_erase_regions =
-		    flash_read_uchar(info, FLASH_OFFSET_NUM_ERASE_REGIONS);
-
-		sect_cnt = 0;
-		sector = base;
-		for (i = 0; i < num_erase_regions; i++) {
-			if (i > NUM_ERASE_REGIONS) {
-				printf("%d erase regions found, only %d used\n",
-				       num_erase_regions, NUM_ERASE_REGIONS);
-				break;
-			}
-			tmp =
-			    flash_read_long(info, 0,
-					    FLASH_OFFSET_ERASE_REGIONS);
-			erase_region_size =
-			    (tmp & 0xffff) ? ((tmp & 0xffff) * 256) : 128;
-			tmp >>= 16;
-			erase_region_count = (tmp & 0xffff) + 1;
-			for (j = 0; j < erase_region_count; j++) {
-				info->start[sect_cnt] = sector;
-				sector += (erase_region_size * size_ratio);
-				info->protect[sect_cnt] =
-				    flash_isset(info, sect_cnt,
-						FLASH_OFFSET_PROTECT,
-						FLASH_STATUS_PROTECT);
-				sect_cnt++;
-			}
-		}
-
-		info->sector_count = sect_cnt;
-		/* multiply the size by the number of chips */
-		info->size =
-		    (1 << flash_read_uchar(info, FLASH_OFFSET_SIZE)) *
-		    size_ratio;
-		info->buffer_size =
-		    (1 << flash_read_ushort(info, 0, FLASH_OFFSET_BUFFER_SIZE));
-		tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_ETOUT);
-		info->erase_blk_tout =
-		    (tmp *
-		     (1 << flash_read_uchar(info, FLASH_OFFSET_EMAX_TOUT)));
-		tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_WBTOUT);
-		info->buffer_write_tout =
-		    (tmp *
-		     (1 << flash_read_uchar(info, FLASH_OFFSET_WBMAX_TOUT)));
-		tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_WTOUT);
-		info->write_tout =
-		    (tmp *
-		     (1 << flash_read_uchar(info, FLASH_OFFSET_WMAX_TOUT))) /
-		    1000;
-		info->flash_id = FLASH_MAN_CFI;
-	}
-
-	flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
-#ifdef DEBUG_FLASH
-	printf("portwidth=%d chipwidth=%d\n", info->portwidth, info->chipwidth);	/* test-only */
-#endif
-#ifdef DEBUG_FLASH
-	printf("found %d erase regions\n", num_erase_regions);
-#endif
-#ifdef DEBUG_FLASH
-	printf("size=%08x sectors=%08x \n", info->size, info->sector_count);
-#endif
-	return (info->size);
-}
-
-/*-----------------------------------------------------------------------
- */
-static int flash_write_cfiword(flash_info_t * info, ulong dest, cfiword_t cword)
-{
-
-	cfiptr_t cptr;
-	int flag;
-
-	cptr.cp = (uchar *)dest;
-
-	/* Check if Flash is (sufficiently) erased */
-	switch (info->portwidth) {
-	case FLASH_CFI_8BIT:
-		flag = ((cptr.cp[0] & cword.c) == cword.c);
-		break;
-	case FLASH_CFI_16BIT:
-		flag = ((cptr.wp[0] & cword.w) == cword.w);
-		break;
-	case FLASH_CFI_32BIT:
-		flag = ((cptr.lp[0] & cword.l) == cword.l);
-		break;
-	default:
-		return 2;
-	}
-	if (!flag)
-		return 2;
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	flash_write_cmd(info, 0, 0, FLASH_CMD_CLEAR_STATUS);
-	flash_write_cmd(info, 0, 0, FLASH_CMD_WRITE);
-
-	switch (info->portwidth) {
-	case FLASH_CFI_8BIT:
-		cptr.cp[0] = cword.c;
-		break;
-	case FLASH_CFI_16BIT:
-		cptr.wp[0] = cword.w;
-		break;
-	case FLASH_CFI_32BIT:
-		cptr.lp[0] = cword.l;
-		break;
-	}
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	return flash_full_status_check(info, 0, info->write_tout, "write");
-}
-
-#ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
-
-/* loop through the sectors from the highest address
- * when the passed address is greater or equal to the sector address
- * we have a match
- */
-static int find_sector(flash_info_t * info, ulong addr)
-{
-	int sector;
-	for (sector = info->sector_count - 1; sector >= 0; sector--) {
-		if (addr >= info->start[sector])
-			break;
-	}
-	return sector;
-}
-
-static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp,
-				 int len)
-{
-
-	int sector;
-	int cnt;
-	int retcode;
-	volatile cfiptr_t src;
-	volatile cfiptr_t dst;
-
-	src.cp = cp;
-	dst.cp = (uchar *) dest;
-	sector = find_sector(info, dest);
-	flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS);
-	flash_write_cmd(info, sector, 0, FLASH_CMD_WRITE_TO_BUFFER);
-	if ((retcode = flash_status_check(info, sector, info->buffer_write_tout,
-					  "write to buffer")) == ERR_OK) {
-		switch (info->portwidth) {
-		case FLASH_CFI_8BIT:
-			cnt = len;
-			break;
-		case FLASH_CFI_16BIT:
-			cnt = len >> 1;
-			break;
-		case FLASH_CFI_32BIT:
-			cnt = len >> 2;
-			break;
-		default:
-			return ERR_INVAL;
-			break;
-		}
-		flash_write_cmd(info, sector, 0, (uchar) cnt - 1);
-		while (cnt-- > 0) {
-			switch (info->portwidth) {
-			case FLASH_CFI_8BIT:
-				*dst.cp++ = *src.cp++;
-				break;
-			case FLASH_CFI_16BIT:
-				*dst.wp++ = *src.wp++;
-				break;
-			case FLASH_CFI_32BIT:
-				*dst.lp++ = *src.lp++;
-				break;
-			default:
-				return ERR_INVAL;
-				break;
-			}
-		}
-		flash_write_cmd(info, sector, 0,
-				FLASH_CMD_WRITE_BUFFER_CONFIRM);
-		retcode =
-		    flash_full_status_check(info, sector,
-					    info->buffer_write_tout,
-					    "buffer write");
-	}
-	flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS);
-	return retcode;
-}
-#endif				/* CONFIG_SYS_USE_FLASH_BUFFER_WRITE */
diff --git a/board/esd/mecp5200/Kconfig b/board/esd/mecp5200/Kconfig
deleted file mode 100644
index cfd5307751..0000000000
--- a/board/esd/mecp5200/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_MECP5200
-
-config SYS_BOARD
-	default "mecp5200"
-
-config SYS_VENDOR
-	default "esd"
-
-config SYS_CONFIG_NAME
-	default "mecp5200"
-
-endif
diff --git a/board/esd/mecp5200/MAINTAINERS b/board/esd/mecp5200/MAINTAINERS
deleted file mode 100644
index 05b78240ac..0000000000
--- a/board/esd/mecp5200/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-MECP5200 BOARD
-M:	Reinhard Arlt <reinhard.arlt@esd-electronics.com>
-S:	Maintained
-F:	board/esd/mecp5200/
-F:	include/configs/mecp5200.h
-F:	configs/mecp5200_defconfig
diff --git a/board/esd/mecp5200/Makefile b/board/esd/mecp5200/Makefile
deleted file mode 100644
index 3d66c9f53d..0000000000
--- a/board/esd/mecp5200/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= mecp5200.o
diff --git a/board/esd/mecp5200/mecp5200.c b/board/esd/mecp5200/mecp5200.c
deleted file mode 100644
index 17a70a9ff6..0000000000
--- a/board/esd/mecp5200/mecp5200.c
+++ /dev/null
@@ -1,251 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * pf5200.c - main board support/init for the esd pf5200.
- */
-
-#include <common.h>
-#include <mpc5xxx.h>
-#include <pci.h>
-#include <command.h>
-#include <netdev.h>
-
-#include "mt46v16m16-75.h"
-
-void init_power_switch(void);
-
-static void sdram_start(int hi_addr)
-{
-	long hi_addr_bit = hi_addr ? 0x01000000 : 0;
-
-	/* unlock mode register */
-	*(vu_long *) MPC5XXX_SDRAM_CTRL =
-	    SDRAM_CONTROL | 0x80000000 | hi_addr_bit;
-	__asm__ volatile ("sync");
-
-	/* precharge all banks */
-	*(vu_long *) MPC5XXX_SDRAM_CTRL =
-	    SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
-	__asm__ volatile ("sync");
-
-	/* set mode register: extended mode */
-	*(vu_long *) MPC5XXX_SDRAM_MODE = SDRAM_EMODE;
-	__asm__ volatile ("sync");
-
-	/* set mode register: reset DLL */
-	*(vu_long *) MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000;
-	__asm__ volatile ("sync");
-
-	/* precharge all banks */
-	*(vu_long *) MPC5XXX_SDRAM_CTRL =
-	    SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
-	__asm__ volatile ("sync");
-
-	/* auto refresh */
-	*(vu_long *) MPC5XXX_SDRAM_CTRL =
-	    SDRAM_CONTROL | 0x80000004 | hi_addr_bit;
-	__asm__ volatile ("sync");
-
-	/* set mode register */
-	*(vu_long *) MPC5XXX_SDRAM_MODE = SDRAM_MODE;
-	__asm__ volatile ("sync");
-
-	/* normal operation */
-	*(vu_long *) MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
-	__asm__ volatile ("sync");
-}
-
-/*
- * ATTENTION: Although partially referenced initdram does NOT make real use
- *            use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
- *            is something else than 0x00000000.
- */
-
-phys_size_t initdram(int board_type)
-{
-	ulong dramsize = 0;
-	ulong test1, test2;
-
-	/* setup SDRAM chip selects */
-	*(vu_long *) MPC5XXX_SDRAM_CS0CFG = 0x0000001e;	/* 2G at 0x0 */
-	*(vu_long *) MPC5XXX_SDRAM_CS1CFG = 0x80000000;	/* disabled */
-	__asm__ volatile ("sync");
-
-	/* setup config registers */
-	*(vu_long *) MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
-	*(vu_long *) MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
-	__asm__ volatile ("sync");
-
-	/* set tap delay */
-	*(vu_long *) MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY;
-	__asm__ volatile ("sync");
-
-	/* find RAM size using SDRAM CS0 only */
-	sdram_start(0);
-	test1 = get_ram_size(CONFIG_SYS_SDRAM_BASE, 0x80000000);
-	sdram_start(1);
-	test2 = get_ram_size(CONFIG_SYS_SDRAM_BASE, 0x80000000);
-
-	if (test1 > test2) {
-		sdram_start(0);
-		dramsize = test1;
-	} else {
-		dramsize = test2;
-	}
-
-	/* memory smaller than 1MB is impossible */
-	if (dramsize < (1 << 20))
-		dramsize = 0;
-
-	/* set SDRAM CS0 size according to the amount of RAM found */
-	if (dramsize > 0) {
-		*(vu_long *) MPC5XXX_SDRAM_CS0CFG =
-		    0x13 + __builtin_ffs(dramsize >> 20) - 1;
-		/* let SDRAM CS1 start right after CS0 */
-		*(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;	/* 2G */
-	} else {
-#if 0
-		*(vu_long *) MPC5XXX_SDRAM_CS0CFG = 0;	/* disabled */
-		/* let SDRAM CS1 start right after CS0 */
-		*(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;	/* 2G */
-#else
-		*(vu_long *) MPC5XXX_SDRAM_CS0CFG =
-		    0x13 + __builtin_ffs(0x08000000 >> 20) - 1;
-		/* let SDRAM CS1 start right after CS0 */
-		*(vu_long *) MPC5XXX_SDRAM_CS1CFG = 0x08000000 + 0x0000001e;	/* 2G */
-#endif
-	}
-
-#if 0
-	/* find RAM size using SDRAM CS1 only */
-	sdram_start(0);
-	get_ram_size((ulong *) (CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
-	sdram_start(1);
-	get_ram_size((ulong *) (CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
-	sdram_start(0);
-#endif
-	/* set SDRAM CS1 size according to the amount of RAM found */
-
-	*(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize;	/* disabled */
-
-	init_power_switch();
-	return (dramsize);
-}
-
-int checkboard(void)
-{
-	puts("Board: esd CPX CPU5200 (mecp5200)\n");
-	return 0;
-}
-
-void flash_preinit(void)
-{
-	/*
-	 * Now, when we are in RAM, enable flash write
-	 * access for detection process.
-	 * Note that CS_BOOT cannot be cleared when
-	 * executing in flash.
-	 */
-	*(vu_long *) MPC5XXX_BOOTCS_CFG &= ~0x1;	/* clear RO */
-}
-
-void flash_afterinit(ulong size)
-{
-	if (size == CONFIG_SYS_FLASH_SIZE) {
-		/* adjust mapping */
-		*(vu_long *) MPC5XXX_BOOTCS_START =
-		    *(vu_long *) MPC5XXX_CS0_START =
-		    START_REG(CONFIG_SYS_BOOTCS_START | size);
-		*(vu_long *) MPC5XXX_BOOTCS_STOP =
-		    *(vu_long *) MPC5XXX_CS0_STOP =
-		    STOP_REG(CONFIG_SYS_BOOTCS_START | size, size);
-	}
-}
-
-#ifdef	CONFIG_PCI
-static struct pci_controller hose;
-
-extern void pci_mpc5xxx_init(struct pci_controller *);
-
-void pci_init_board(void)
-{
-	pci_mpc5xxx_init(&hose);
-}
-#endif
-
-#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET)
-
-#define GPIO_PSC1_4	0x01000000UL
-
-void init_ide_reset(void)
-{
-	debug("init_ide_reset\n");
-
-	/* Configure PSC1_4 as GPIO output for ATA reset */
-	*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC1_4;
-	*(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_PSC1_4;
-}
-
-void ide_set_reset(int idereset)
-{
-	debug("ide_reset(%d)\n", idereset);
-
-	if (idereset)
-		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4;
-	else
-		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4;
-}
-#endif
-
-#define MPC5XXX_SIMPLEIO_GPIO_ENABLE       (MPC5XXX_GPIO + 0x0004)
-#define MPC5XXX_SIMPLEIO_GPIO_DIR          (MPC5XXX_GPIO + 0x000C)
-#define MPC5XXX_SIMPLEIO_GPIO_DATA_OUTPUT  (MPC5XXX_GPIO + 0x0010)
-#define MPC5XXX_SIMPLEIO_GPIO_DATA_INPUT   (MPC5XXX_GPIO + 0x0014)
-
-#define MPC5XXX_INTERRUPT_GPIO_ENABLE      (MPC5XXX_GPIO + 0x0020)
-#define MPC5XXX_INTERRUPT_GPIO_DIR         (MPC5XXX_GPIO + 0x0028)
-#define MPC5XXX_INTERRUPT_GPIO_DATA_OUTPUT (MPC5XXX_GPIO + 0x002C)
-#define MPC5XXX_INTERRUPT_GPIO_STATUS      (MPC5XXX_GPIO + 0x003C)
-
-#define GPIO_WU6	0x40000000UL
-#define GPIO_USB0       0x00010000UL
-#define GPIO_USB9       0x08000000UL
-#define GPIO_USB9S      0x00080000UL
-
-void init_power_switch(void)
-{
-	debug("init_power_switch\n");
-
-	/* Configure GPIO_WU6 as GPIO output for ATA reset */
-	*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_WU6;
-	*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_WU6;
-	*(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_WU6;
-	__asm__ volatile ("sync");
-
-	*(vu_long *) MPC5XXX_SIMPLEIO_GPIO_DATA_OUTPUT &= ~GPIO_USB0;
-	*(vu_long *) MPC5XXX_SIMPLEIO_GPIO_ENABLE |= GPIO_USB0;
-	*(vu_long *) MPC5XXX_SIMPLEIO_GPIO_DIR |= GPIO_USB0;
-	__asm__ volatile ("sync");
-
-	*(vu_long *) MPC5XXX_INTERRUPT_GPIO_DATA_OUTPUT &= ~GPIO_USB9;
-	*(vu_long *) MPC5XXX_INTERRUPT_GPIO_ENABLE &= ~GPIO_USB9;
-	__asm__ volatile ("sync");
-
-	if ((*(vu_long *) MPC5XXX_INTERRUPT_GPIO_STATUS & GPIO_USB9S) == 0) {
-		*(vu_long *) MPC5XXX_SIMPLEIO_GPIO_DATA_OUTPUT |= GPIO_USB0;
-		__asm__ volatile ("sync");
-	}
-}
-
-int board_eth_init(bd_t *bis)
-{
-	return pci_eth_init(bis);
-}
diff --git a/board/esd/mecp5200/mt46v16m16-75.h b/board/esd/mecp5200/mt46v16m16-75.h
deleted file mode 100644
index 63a403231d..0000000000
--- a/board/esd/mecp5200/mt46v16m16-75.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#define SDRAM_DDR	1	/* is DDR */
-
-/* Settings for XLB = 132 MHz */
-#define SDRAM_MODE	0x018D0000
-#define SDRAM_EMODE	0x40090000
-#define SDRAM_CONTROL	0x705f0f00
-#define SDRAM_CONFIG1	0x73722930
-#define SDRAM_CONFIG2	0x47770000
-#define SDRAM_TAPDELAY	0x10000000
diff --git a/board/esd/pf5200/Kconfig b/board/esd/pf5200/Kconfig
deleted file mode 100644
index c596e7a66c..0000000000
--- a/board/esd/pf5200/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_PF5200
-
-config SYS_BOARD
-	default "pf5200"
-
-config SYS_VENDOR
-	default "esd"
-
-config SYS_CONFIG_NAME
-	default "pf5200"
-
-endif
diff --git a/board/esd/pf5200/MAINTAINERS b/board/esd/pf5200/MAINTAINERS
deleted file mode 100644
index b6e624e074..0000000000
--- a/board/esd/pf5200/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-PF5200 BOARD
-M:	Reinhard Arlt <reinhard.arlt@esd-electronics.com>
-S:	Maintained
-F:	board/esd/pf5200/
-F:	include/configs/pf5200.h
-F:	configs/pf5200_defconfig
diff --git a/board/esd/pf5200/Makefile b/board/esd/pf5200/Makefile
deleted file mode 100644
index a54289c073..0000000000
--- a/board/esd/pf5200/Makefile
+++ /dev/null
@@ -1,14 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-# Objects for Xilinx JTAG programming (CPLD)
-# CPLD  = ../common/xilinx_jtag/lenval.o \
-#	  ../common/xilinx_jtag/micro.o \
-#	  ../common/xilinx_jtag/ports.o
-
-# obj-y	= pf5200.o flash.o $(CPLD)
-obj-y	= pf5200.o flash.o
diff --git a/board/esd/pf5200/flash.c b/board/esd/pf5200/flash.c
deleted file mode 100644
index e1b13bfc44..0000000000
--- a/board/esd/pf5200/flash.c
+++ /dev/null
@@ -1,445 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips */
-
-typedef unsigned short FLASH_PORT_WIDTH;
-typedef volatile unsigned short FLASH_PORT_WIDTHV;
-
-#define FLASH_ID_MASK           0x00FF
-
-#define FPW                     FLASH_PORT_WIDTH
-#define FPWV                    FLASH_PORT_WIDTHV
-
-#define FLASH_CYCLE1            0x0555
-#define FLASH_CYCLE2            0x0aaa
-#define FLASH_ID1               0x00
-#define FLASH_ID2               0x01
-#define FLASH_ID3               0x0E
-#define FLASH_ID4               0x0F
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size(FPWV * addr, flash_info_t * info);
-static void flash_reset(flash_info_t * info);
-static int write_word_amd(flash_info_t * info, FPWV * dest, FPW data);
-static flash_info_t *flash_get_info(ulong base);
-
-/*-----------------------------------------------------------------------
- * flash_init()
- *
- * sets up flash_info and returns size of FLASH (bytes)
- */
-unsigned long flash_init(void)
-{
-	unsigned long size = 0;
-	int i = 0;
-	extern void flash_preinit(void);
-	extern void flash_afterinit(uint, ulong, ulong);
-
-	ulong flashbase = CONFIG_SYS_FLASH_BASE;
-
-	flash_preinit();
-
-	/* There is only ONE FLASH device */
-	memset(&flash_info[i], 0, sizeof(flash_info_t));
-	flash_info[i].size = flash_get_size((FPW *) flashbase, &flash_info[i]);
-	size += flash_info[i].size;
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
-	/* monitor protection ON by default */
-	flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE,
-		      CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
-		      flash_get_info(CONFIG_SYS_MONITOR_BASE));
-#endif
-
-#ifdef  CONFIG_ENV_IS_IN_FLASH
-	/* ENV protection ON by default */
-	flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR,
-		      CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
-		      flash_get_info(CONFIG_ENV_ADDR));
-#endif
-
-	flash_afterinit(i, flash_info[i].start[0], flash_info[i].size);
-	return size ? size : 1;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_reset(flash_info_t * info) {
-	FPWV *base = (FPWV *) (info->start[0]);
-
-	/* Put FLASH back in read mode */
-	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
-		*base = (FPW) 0x00FF00FF;	/* Intel Read Mode */
-	} else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD) {
-		*base = (FPW) 0x00F000F0;	/* AMD Read Mode */
-	}
-}
-
-/*-----------------------------------------------------------------------
- */
-
-static flash_info_t *flash_get_info(ulong base) {
-	int i;
-	flash_info_t *info;
-
-	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
-		info = &flash_info[i];
-		if ((info->size) && (info->start[0] <= base)
-		    && (base <= info->start[0] + info->size - 1)) {
-			break;
-		}
-	}
-	return (i == CONFIG_SYS_MAX_FLASH_BANKS ? 0 : info);
-}
-
-/*-----------------------------------------------------------------------
- */
-
-void flash_print_info(flash_info_t * info) {
-	int i;
-	char *fmt;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_AMD:
-		printf("AMD ");
-		break;
-	default:
-		printf("Unknown Vendor ");
-		break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_AMLV256U:
-		fmt = "29LV256M (256 Mbit)\n";
-		break;
-	default:
-		fmt = "Unknown Chip Type\n";
-		break;
-	}
-
-	printf(fmt);
-	printf("  Size: %ld MB in %d Sectors\n", info->size >> 20,
-	       info->sector_count);
-	printf("  Sector Start Addresses:");
-
-	for (i = 0; i < info->sector_count; ++i) {
-		ulong size;
-		int erased;
-		ulong *flash = (unsigned long *)info->start[i];
-
-		if ((i % 5) == 0) {
-			printf("\n   ");
-		}
-
-		/*
-		 * Check if whole sector is erased
-		 */
-		size =
-		    (i !=
-		     (info->sector_count - 1)) ? (info->start[i + 1] -
-						  info->start[i]) >> 2 : (info->
-									  start
-									  [0] +
-									  info->
-									  size -
-									  info->
-									  start
-									  [i])
-		    >> 2;
-
-		for (flash = (unsigned long *)info->start[i], erased = 1;
-		     (flash != (unsigned long *)info->start[i] + size)
-		     && erased; flash++) {
-			erased = *flash == ~0x0UL;
-		}
-		printf(" %08lX %s %s", info->start[i], erased ? "E" : " ",
-		       info->protect[i] ? "(RO)" : "    ");
-	}
-
-	printf("\n");
-}
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-ulong flash_get_size(FPWV * addr, flash_info_t * info) {
-	int i;
-
-	/* Write auto select command: read Manufacturer ID                     */
-	/* Write auto select command sequence and test FLASH answer            */
-	addr[FLASH_CYCLE1] = (FPW) 0x00AA00AA;	/* for AMD, Intel ignores this */
-	addr[FLASH_CYCLE2] = (FPW) 0x00550055;	/* for AMD, Intel ignores this */
-	addr[FLASH_CYCLE1] = (FPW) 0x00900090;	/* selects Intel or AMD        */
-
-	/* The manufacturer codes are only 1 byte, so just use 1 byte.         */
-	/* This works for any bus width and any FLASH device width.            */
-	udelay(100);
-	switch (addr[FLASH_ID1] & 0x00ff) {
-	case (uchar) AMD_MANUFACT:
-		info->flash_id = FLASH_MAN_AMD;
-		break;
-	default:
-		printf("unknown vendor=%x ", addr[FLASH_ID1] & 0xff);
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		break;
-	}
-
-	/* Check 16 bits or 32 bits of ID so work on 32 or 16 bit bus.     */
-	if (info->flash_id != FLASH_UNKNOWN) {
-		switch ((FPW) addr[FLASH_ID2]) {
-		case (FPW) AMD_ID_MIRROR:
-			/* MIRROR BIT FLASH, read more ID bytes */
-			if ((FPW) addr[FLASH_ID3] == (FPW) AMD_ID_LV256U_2
-			    && (FPW) addr[FLASH_ID4] == (FPW) AMD_ID_LV256U_3) {
-				/* attention: only the first 16 MB will be used in u-boot */
-				info->flash_id += FLASH_AMLV256U;
-				info->sector_count = 512;
-				info->size = 0x02000000;
-				for (i = 0; i < info->sector_count; i++) {
-					info->start[i] =
-					    (ulong) addr + 0x10000 * i;
-				}
-				break;
-			}
-			/* fall thru to here ! */
-		default:
-			printf("unknown AMD device=%x %x %x",
-			       (FPW) addr[FLASH_ID2], (FPW) addr[FLASH_ID3],
-			       (FPW) addr[FLASH_ID4]);
-			info->flash_id = FLASH_UNKNOWN;
-			info->sector_count = 0;
-			info->size = 0x800000;
-			break;
-		}
-
-		/* Put FLASH back in read mode */
-		flash_reset(info);
-	}
-	return (info->size);
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase(flash_info_t * info, int s_first, int s_last) {
-	FPWV *addr;
-	int flag, prot, sect;
-	int intel = (info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL;
-	ulong start, now, last;
-	int rcode = 0;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf("- missing\n");
-		} else {
-			printf("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_AMLV256U:
-		break;
-	case FLASH_UNKNOWN:
-	default:
-		printf("Can't erase unknown flash type %08lx - aborted\n",
-		       info->flash_id);
-		return 1;
-	}
-
-	prot = 0;
-	for (sect = s_first; sect <= s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot) {
-		printf("- Warning: %d protected sectors will not be erased!\n",
-		       prot);
-	} else {
-		printf("\n");
-	}
-
-	last = get_timer(0);
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect <= s_last && rcode == 0; sect++) {
-		if (info->protect[sect] != 0) {	/* protected, skip it */
-			continue;
-		}
-		/* Disable interrupts which might cause a timeout here */
-		flag = disable_interrupts();
-
-		addr = (FPWV *) (info->start[sect]);
-		if (intel) {
-			*addr = (FPW) 0x00500050;	/* clear status register */
-			*addr = (FPW) 0x00200020;	/* erase setup */
-			*addr = (FPW) 0x00D000D0;	/* erase confirm */
-		} else {
-			/* must be AMD style if not Intel */
-			FPWV *base;	/* first address in bank */
-
-			base = (FPWV *) (info->start[0]);
-			base[FLASH_CYCLE1] = (FPW) 0x00AA00AA;	/* unlock */
-			base[FLASH_CYCLE2] = (FPW) 0x00550055;	/* unlock */
-			base[FLASH_CYCLE1] = (FPW) 0x00800080;	/* erase mode */
-			base[FLASH_CYCLE1] = (FPW) 0x00AA00AA;	/* unlock */
-			base[FLASH_CYCLE2] = (FPW) 0x00550055;	/* unlock */
-			*addr = (FPW) 0x00300030;	/* erase sector */
-		}
-
-		/* re-enable interrupts if necessary */
-		if (flag) {
-			enable_interrupts();
-		}
-		start = get_timer(0);
-
-		/* wait at least 50us for AMD, 80us for Intel. */
-		/* Let's wait 1 ms.                            */
-		udelay(1000);
-
-		while ((*addr & (FPW) 0x00800080) != (FPW) 0x00800080) {
-			if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-				printf("Timeout\n");
-				if (intel) {
-					/* suspend erase        */
-					*addr = (FPW) 0x00B000B0;
-				}
-				flash_reset(info);	/* reset to read mode */
-				rcode = 1;	/* failed */
-				break;
-			}
-			/* show that we're waiting */
-			if ((get_timer(last)) > CONFIG_SYS_HZ) {
-				/* every second */
-				putc('.');
-				last = get_timer(0);
-			}
-		}
-		/* show that we're waiting */
-		if ((get_timer(last)) > CONFIG_SYS_HZ) {
-			/* every second */
-			putc('.');
-			last = get_timer(0);
-		}
-		flash_reset(info);	/* reset to read mode */
-	}
-	printf(" done\n");
-	return (rcode);
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
-	FPW data = 0;		/* 16 or 32 bit word, matches flash bus width on MPC8XX */
-	int bytes;		/* number of bytes to program in current word         */
-	int left;		/* number of bytes left to program                    */
-	int i, res;
-
-	for (left = cnt, res = 0;
-	     left > 0 && res == 0;
-	     addr += sizeof(data), left -= sizeof(data) - bytes) {
-
-		bytes = addr & (sizeof(data) - 1);
-		addr &= ~(sizeof(data) - 1);
-
-		/* combine source and destination data so can program
-		 * an entire word of 16 or 32 bits
-		 */
-		for (i = 0; i < sizeof(data); i++) {
-			data <<= 8;
-			if (i < bytes || i - bytes >= left)
-				data += *((uchar *) addr + i);
-			else
-				data += *src++;
-		}
-
-		/* write one word to the flash */
-		switch (info->flash_id & FLASH_VENDMASK) {
-		case FLASH_MAN_AMD:
-			res = write_word_amd(info, (FPWV *) addr, data);
-			break;
-		default:
-			/* unknown flash type, error! */
-			printf("missing or unknown FLASH type\n");
-			res = 1;	/* not really a timeout, but gives error */
-			break;
-		}
-	}
-	return (res);
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash for AMD FLASH
- * A word is 16 or 32 bits, whichever the bus width of the flash bank
- * (not an individual chip) is.
- *
- * returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word_amd(flash_info_t * info, FPWV * dest, FPW data) {
-	ulong start;
-	int flag;
-	int res = 0;		/* result, assume success       */
-	FPWV *base;		/* first address in flash bank  */
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*dest & data) != data) {
-		return (2);
-	}
-
-	base = (FPWV *) (info->start[0]);
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	base[FLASH_CYCLE1] = (FPW) 0x00AA00AA;	/* unlock */
-	base[FLASH_CYCLE2] = (FPW) 0x00550055;	/* unlock */
-	base[FLASH_CYCLE1] = (FPW) 0x00A000A0;	/* selects program mode */
-
-	*dest = data;		/* start programming the data   */
-
-	/* re-enable interrupts if necessary */
-	if (flag) {
-		enable_interrupts();
-	}
-	start = get_timer(0);
-
-	/* data polling for D7 */
-	while (res == 0
-	       && (*dest & (FPW) 0x00800080) != (data & (FPW) 0x00800080)) {
-		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-			*dest = (FPW) 0x00F000F0;	/* reset bank */
-			res = 1;
-		}
-	}
-	return (res);
-}
diff --git a/board/esd/pf5200/mt46v16m16-75.h b/board/esd/pf5200/mt46v16m16-75.h
deleted file mode 100644
index 63a403231d..0000000000
--- a/board/esd/pf5200/mt46v16m16-75.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#define SDRAM_DDR	1	/* is DDR */
-
-/* Settings for XLB = 132 MHz */
-#define SDRAM_MODE	0x018D0000
-#define SDRAM_EMODE	0x40090000
-#define SDRAM_CONTROL	0x705f0f00
-#define SDRAM_CONFIG1	0x73722930
-#define SDRAM_CONFIG2	0x47770000
-#define SDRAM_TAPDELAY	0x10000000
diff --git a/board/esd/pf5200/pf5200.c b/board/esd/pf5200/pf5200.c
deleted file mode 100644
index 7a9ed229ef..0000000000
--- a/board/esd/pf5200/pf5200.c
+++ /dev/null
@@ -1,357 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * pf5200.c - main board support/init for the esd pf5200.
- */
-
-#include <common.h>
-#include <mpc5xxx.h>
-#include <pci.h>
-#include <command.h>
-#include <netdev.h>
-
-#include "mt46v16m16-75.h"
-
-void init_power_switch(void);
-
-static void sdram_start(int hi_addr)
-{
-	long hi_addr_bit = hi_addr ? 0x01000000 : 0;
-
-	/* unlock mode register */
-	*(vu_long *) MPC5XXX_SDRAM_CTRL =
-	    SDRAM_CONTROL | 0x80000000 | hi_addr_bit;
-	__asm__ volatile ("sync");
-
-	/* precharge all banks */
-	*(vu_long *) MPC5XXX_SDRAM_CTRL =
-	    SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
-	__asm__ volatile ("sync");
-
-	/* set mode register: extended mode */
-	*(vu_long *) MPC5XXX_SDRAM_MODE = SDRAM_EMODE;
-	__asm__ volatile ("sync");
-
-	/* set mode register: reset DLL */
-	*(vu_long *) MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000;
-	__asm__ volatile ("sync");
-
-	/* precharge all banks */
-	*(vu_long *) MPC5XXX_SDRAM_CTRL =
-	    SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
-	__asm__ volatile ("sync");
-
-	/* auto refresh */
-	*(vu_long *) MPC5XXX_SDRAM_CTRL =
-	    SDRAM_CONTROL | 0x80000004 | hi_addr_bit;
-	__asm__ volatile ("sync");
-
-	/* set mode register */
-	*(vu_long *) MPC5XXX_SDRAM_MODE = SDRAM_MODE;
-	__asm__ volatile ("sync");
-
-	/* normal operation */
-	*(vu_long *) MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
-	__asm__ volatile ("sync");
-}
-
-/*
- * ATTENTION: Although partially referenced initdram does NOT make real use
- *            use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
- *            is something else than 0x00000000.
- */
-
-phys_size_t initdram(int board_type)
-{
-	ulong dramsize = 0;
-	ulong test1, test2;
-
-	/* setup SDRAM chip selects */
-	*(vu_long *) MPC5XXX_SDRAM_CS0CFG = 0x0000001e;	/* 2G at 0x0 */
-	*(vu_long *) MPC5XXX_SDRAM_CS1CFG = 0x80000000;	/* disabled */
-	__asm__ volatile ("sync");
-
-	/* setup config registers */
-	*(vu_long *) MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
-	*(vu_long *) MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
-	__asm__ volatile ("sync");
-
-	/* set tap delay */
-	*(vu_long *) MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY;
-	__asm__ volatile ("sync");
-
-	/* find RAM size using SDRAM CS0 only */
-	sdram_start(0);
-	test1 = get_ram_size((long *) CONFIG_SYS_SDRAM_BASE, 0x80000000);
-	sdram_start(1);
-	test2 = get_ram_size((long *) CONFIG_SYS_SDRAM_BASE, 0x80000000);
-
-	if (test1 > test2) {
-		sdram_start(0);
-		dramsize = test1;
-	} else {
-		dramsize = test2;
-	}
-
-	/* memory smaller than 1MB is impossible */
-	if (dramsize < (1 << 20)) {
-		dramsize = 0;
-	}
-
-	/* set SDRAM CS0 size according to the amount of RAM found */
-	if (dramsize > 0) {
-		*(vu_long *) MPC5XXX_SDRAM_CS0CFG =
-		    0x13 + __builtin_ffs(dramsize >> 20) - 1;
-		/* let SDRAM CS1 start right after CS0 */
-		*(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;	/* 2G */
-	} else {
-#if 0
-		*(vu_long *) MPC5XXX_SDRAM_CS0CFG = 0;	/* disabled */
-		/* let SDRAM CS1 start right after CS0 */
-		*(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;	/* 2G */
-#else
-		*(vu_long *) MPC5XXX_SDRAM_CS0CFG =
-		    0x13 + __builtin_ffs(0x08000000 >> 20) - 1;
-		/* let SDRAM CS1 start right after CS0 */
-		*(vu_long *) MPC5XXX_SDRAM_CS1CFG = 0x08000000 + 0x0000001e;	/* 2G */
-#endif
-	}
-
-#if 0
-	/* find RAM size using SDRAM CS1 only */
-	sdram_start(0);
-	get_ram_size((ulong *) (CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
-	sdram_start(1);
-	get_ram_size((ulong *) (CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
-	sdram_start(0);
-#endif
-	/* set SDRAM CS1 size according to the amount of RAM found */
-
-	*(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize;	/* disabled */
-
-	init_power_switch();
-	return (dramsize);
-}
-
-int checkboard(void)
-{
-	puts("Board: esd ParaFinder (pf5200)\n");
-	return 0;
-}
-
-void flash_preinit(void)
-{
-	/*
-	 * Now, when we are in RAM, enable flash write
-	 * access for detection process.
-	 * Note that CS_BOOT cannot be cleared when
-	 * executing in flash.
-	 */
-	*(vu_long *) MPC5XXX_BOOTCS_CFG &= ~0x1;	/* clear RO */
-}
-
-void flash_afterinit(ulong size)
-{
-	if (size == 0x02000000) {
-		/* adjust mapping */
-		*(vu_long *) MPC5XXX_BOOTCS_START =
-		    *(vu_long *) MPC5XXX_CS0_START =
-		    START_REG(CONFIG_SYS_BOOTCS_START | size);
-		*(vu_long *) MPC5XXX_BOOTCS_STOP =
-		    *(vu_long *) MPC5XXX_CS0_STOP =
-		    STOP_REG(CONFIG_SYS_BOOTCS_START | size, size);
-	}
-}
-
-#ifdef	CONFIG_PCI
-static struct pci_controller hose;
-
-extern void pci_mpc5xxx_init(struct pci_controller *);
-
-void pci_init_board(void) {
-	pci_mpc5xxx_init(&hose);
-}
-#endif
-
-#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET)
-
-void init_ide_reset(void)
-{
-	debug("init_ide_reset\n");
-
-	/* Configure PSC1_4 as GPIO output for ATA reset */
-	*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC1_4;
-	*(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_PSC1_4;
-}
-
-void ide_set_reset(int idereset)
-{
-	debug("ide_reset(%d)\n", idereset);
-
-	if (idereset) {
-		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4;
-	} else {
-		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4;
-	}
-}
-#endif
-
-#define MPC5XXX_SIMPLEIO_GPIO_ENABLE       (MPC5XXX_GPIO + 0x0004)
-#define MPC5XXX_SIMPLEIO_GPIO_DIR          (MPC5XXX_GPIO + 0x000C)
-#define MPC5XXX_SIMPLEIO_GPIO_DATA_OUTPUT  (MPC5XXX_GPIO + 0x0010)
-#define MPC5XXX_SIMPLEIO_GPIO_DATA_INPUT   (MPC5XXX_GPIO + 0x0014)
-
-#define MPC5XXX_INTERRUPT_GPIO_ENABLE      (MPC5XXX_GPIO + 0x0020)
-#define MPC5XXX_INTERRUPT_GPIO_DIR         (MPC5XXX_GPIO + 0x0028)
-#define MPC5XXX_INTERRUPT_GPIO_DATA_OUTPUT (MPC5XXX_GPIO + 0x002C)
-#define MPC5XXX_INTERRUPT_GPIO_STATUS      (MPC5XXX_GPIO + 0x003C)
-
-#define GPIO_WU6	0x40000000UL
-#define GPIO_USB0       0x00010000UL
-#define GPIO_USB9       0x08000000UL
-#define GPIO_USB9S      0x00080000UL
-
-void init_power_switch(void)
-{
-	debug("init_power_switch\n");
-
-	/* Configure GPIO_WU6 as GPIO output for ATA reset */
-	*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_WU6;
-	*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_WU6;
-	*(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_WU6;
-	__asm__ volatile ("sync");
-
-	*(vu_long *) MPC5XXX_SIMPLEIO_GPIO_DATA_OUTPUT &= ~GPIO_USB0;
-	*(vu_long *) MPC5XXX_SIMPLEIO_GPIO_ENABLE |= GPIO_USB0;
-	*(vu_long *) MPC5XXX_SIMPLEIO_GPIO_DIR |= GPIO_USB0;
-	__asm__ volatile ("sync");
-
-	*(vu_long *) MPC5XXX_INTERRUPT_GPIO_DATA_OUTPUT &= ~GPIO_USB9;
-	*(vu_long *) MPC5XXX_INTERRUPT_GPIO_ENABLE &= ~GPIO_USB9;
-	__asm__ volatile ("sync");
-
-	if ((*(vu_long *) MPC5XXX_INTERRUPT_GPIO_STATUS & GPIO_USB9S) == 0) {
-		*(vu_long *) MPC5XXX_SIMPLEIO_GPIO_DATA_OUTPUT |= GPIO_USB0;
-		__asm__ volatile ("sync");
-	}
-	*(vu_char *) CONFIG_SYS_CS1_START = 0x02;	/* Red Power LED on */
-	__asm__ volatile ("sync");
-
-	*(vu_char *) (CONFIG_SYS_CS1_START + 1) = 0x02;	/* Disable driver for KB11 */
-	__asm__ volatile ("sync");
-}
-
-int board_eth_init(bd_t *bis)
-{
-	return pci_eth_init(bis);
-}
-
-void power_set_reset(int power)
-{
-	debug("ide_set_reset(%d)\n", power);
-
-	if (power) {
-		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_WU6;
-		*(vu_long *) MPC5XXX_INTERRUPT_GPIO_DATA_OUTPUT &= ~GPIO_USB9;
-	} else {
-		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_WU6;
-		if ((*(vu_long *) MPC5XXX_INTERRUPT_GPIO_STATUS & GPIO_USB9S) ==
-		    0) {
-			*(vu_long *) MPC5XXX_SIMPLEIO_GPIO_DATA_OUTPUT |=
-			    GPIO_USB0;
-		}
-
-	}
-}
-
-int do_poweroff(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
-{
-	power_set_reset(1);
-	return (0);
-}
-
-U_BOOT_CMD(poweroff, 1, 1, do_poweroff, "Switch off power", "");
-
-int phypower(int flag)
-{
-	u32 addr;
-	vu_long *reg;
-	int status;
-	pci_dev_t dev;
-
-	dev = PCI_BDF(0, 0x18, 0);
-	status = pci_read_config_dword(dev, PCI_BASE_ADDRESS_1, &addr);
-	if (status == 0) {
-		reg = (vu_long *) (addr + 0x00000040);
-		*reg |= 0x40000000;
-		__asm__ volatile ("sync");
-
-		reg = (vu_long *) (addr + 0x001000c);
-		*reg |= 0x20000000;
-		__asm__ volatile ("sync");
-
-		reg = (vu_long *) (addr + 0x0010004);
-		if (flag != 0) {
-			*reg &= ~0x20000000;
-		} else {
-			*reg |= 0x20000000;
-		}
-		__asm__ volatile ("sync");
-	}
-	return (status);
-}
-
-int do_phypower(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
-{
-	if (argv[1][0] == '0')
-		(void)phypower(0);
-	else
-		(void)phypower(1);
-
-	return (0);
-}
-
-U_BOOT_CMD(phypower, 2, 2, do_phypower,
-	   "Switch power of ethernet phy", "");
-
-int do_writepci(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
-{
-	unsigned int addr;
-	unsigned int size;
-	int i;
-	volatile unsigned long *ptr;
-
-	addr = simple_strtol(argv[1], NULL, 16);
-	size = simple_strtol(argv[2], NULL, 16);
-
-	printf("\nWriting at addr %08x, size %08x.\n", addr, size);
-
-	while (1) {
-		ptr = (volatile unsigned long *)addr;
-		for (i = 0; i < (size >> 2); i++) {
-			*ptr++ = i;
-		}
-
-		/* Abort if ctrl-c was pressed */
-		if (ctrlc()) {
-			puts("\nAbort\n");
-			return 0;
-		}
-		putc('.');
-	}
-	return 0;
-}
-
-U_BOOT_CMD(writepci, 3, 1, do_writepci,
-	"Write some data to pcibus",
-	"<addr> <size>\n"
-	""
-);
diff --git a/board/freescale/c29xpcie/MAINTAINERS b/board/freescale/c29xpcie/MAINTAINERS
index db2e5e3bd3..33088396f5 100644
--- a/board/freescale/c29xpcie/MAINTAINERS
+++ b/board/freescale/c29xpcie/MAINTAINERS
@@ -6,3 +6,5 @@ F:	include/configs/C29XPCIE.h
 F:	configs/C29XPCIE_defconfig
 F:	configs/C29XPCIE_NAND_defconfig
 F:	configs/C29XPCIE_SPIFLASH_defconfig
+F:	configs/C29XPCIE_NOR_SECBOOT_defconfig
+F:	configs/C29XPCIE_SPIFLASH_SECBOOT_defconfig
diff --git a/board/freescale/common/pq-mds-pib.c b/board/freescale/common/pq-mds-pib.c
index 5f7a67d057..1eb37866e3 100644
--- a/board/freescale/common/pq-mds-pib.c
+++ b/board/freescale/common/pq-mds-pib.c
@@ -63,7 +63,7 @@ int pib_init(void)
 #endif
 
 #if defined(CONFIG_PQ_MDS_PIB_ATM)
-#if defined(CONFIG_MPC8360EMDS) || defined(CONFIG_MPC8569MDS)
+#if defined(CONFIG_MPC8569MDS)
 	val8 = 0;
 	i2c_write(0x20, 0x6, 1, &val8, 1);
 	i2c_write(0x20, 0x7, 1, &val8, 1);
diff --git a/board/freescale/corenet_ds/MAINTAINERS b/board/freescale/corenet_ds/MAINTAINERS
index c8ca6746f1..745847cdba 100644
--- a/board/freescale/corenet_ds/MAINTAINERS
+++ b/board/freescale/corenet_ds/MAINTAINERS
@@ -27,3 +27,4 @@ F:	configs/P5040DS_defconfig
 F:	configs/P5040DS_NAND_defconfig
 F:	configs/P5040DS_SDCARD_defconfig
 F:	configs/P5040DS_SPIFLASH_defconfig
+F:	configs/P5040DS_SECURE_BOOT_defconfig
diff --git a/board/freescale/ls1021aqds/MAINTAINERS b/board/freescale/ls1021aqds/MAINTAINERS
index 638833dc41..661526b993 100644
--- a/board/freescale/ls1021aqds/MAINTAINERS
+++ b/board/freescale/ls1021aqds/MAINTAINERS
@@ -6,6 +6,7 @@ F:	include/configs/ls1021aqds.h
 F:	configs/ls1021aqds_nor_defconfig
 F:	configs/ls1021aqds_ddr4_nor_defconfig
 F:	configs/ls1021aqds_nor_SECURE_BOOT_defconfig
+F:	configs/ls1021aqds_nor_lpuart_defconfig
 F:	configs/ls1021aqds_sdcard_defconfig
 F:	configs/ls1021aqds_qspi_defconfig
 F:	configs/ls1021aqds_nand_defconfig
diff --git a/board/freescale/ls1021aqds/Makefile b/board/freescale/ls1021aqds/Makefile
index 3b6903c83b..ab0234412c 100644
--- a/board/freescale/ls1021aqds/Makefile
+++ b/board/freescale/ls1021aqds/Makefile
@@ -7,3 +7,4 @@
 obj-y += ls1021aqds.o
 obj-y += ddr.o
 obj-y += eth.o
+obj-$(CONFIG_FSL_DCU_FB) += dcu.o
diff --git a/board/freescale/ls1021aqds/dcu.c b/board/freescale/ls1021aqds/dcu.c
new file mode 100644
index 0000000000..90f5bc0445
--- /dev/null
+++ b/board/freescale/ls1021aqds/dcu.c
@@ -0,0 +1,92 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * FSL DCU Framebuffer driver
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <asm/io.h>
+#include <common.h>
+#include <fsl_dcu_fb.h>
+#include <i2c.h>
+#include "div64.h"
+#include "../common/diu_ch7301.h"
+#include "ls1021aqds_qixis.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static int select_i2c_ch_pca9547(u8 ch)
+{
+	int ret;
+
+	ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
+	if (ret) {
+		puts("PCA: failed to select proper channel\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+unsigned int dcu_set_pixel_clock(unsigned int pixclock)
+{
+	unsigned long long div;
+
+	div = (unsigned long long)(gd->bus_clk / 1000);
+	div *= (unsigned long long)pixclock;
+	do_div(div, 1000000000);
+
+	return div;
+}
+
+int platform_dcu_init(unsigned int xres, unsigned int yres,
+		      const char *port,
+		      struct fb_videomode *dcu_fb_videomode)
+{
+	const char *name;
+	unsigned int pixel_format;
+	int ret;
+	u8 ch;
+
+	/* Mux I2C3+I2C4 as HSYNC+VSYNC */
+	ret = i2c_read(CONFIG_SYS_I2C_QIXIS_ADDR, QIXIS_DCU_BRDCFG5,
+		       1, &ch, 1);
+	if (ret) {
+		printf("Error: failed to read I2C @%02x\n",
+		       CONFIG_SYS_I2C_QIXIS_ADDR);
+		return ret;
+	}
+	ch &= 0x1F;
+	ch |= 0xA0;
+	ret = i2c_write(CONFIG_SYS_I2C_QIXIS_ADDR, QIXIS_DCU_BRDCFG5,
+			1, &ch, 1);
+	if (ret) {
+		printf("Error: failed to write I2C @%02x\n",
+		       CONFIG_SYS_I2C_QIXIS_ADDR);
+		return ret;
+	}
+
+	if (strncmp(port, "hdmi", 4) == 0) {
+		unsigned long pixval;
+
+		name = "HDMI";
+
+		pixval = 1000000000 / dcu_fb_videomode->pixclock;
+		pixval *= 1000;
+
+		i2c_set_bus_num(CONFIG_SYS_I2C_DVI_BUS_NUM);
+		select_i2c_ch_pca9547(I2C_MUX_CH_CH7301);
+		diu_set_dvi_encoder(pixval);
+		select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+	} else {
+		return 0;
+	}
+
+	printf("DCU: Switching to %s monitor @ %ux%u\n", name, xres, yres);
+
+	pixel_format = 32;
+	fsl_dcu_init(xres, yres, pixel_format);
+
+	return 0;
+}
diff --git a/board/freescale/ls1021aqds/ddr.c b/board/freescale/ls1021aqds/ddr.c
index a539ff9791..6435bf9ad1 100644
--- a/board/freescale/ls1021aqds/ddr.c
+++ b/board/freescale/ls1021aqds/ddr.c
@@ -7,6 +7,7 @@
 #include <common.h>
 #include <fsl_ddr_sdram.h>
 #include <fsl_ddr_dimm_params.h>
+#include <asm/io.h>
 #include "ddr.h"
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -149,6 +150,17 @@ int fsl_ddr_get_dimm_params(dimm_params_t *pdimm,
 }
 #endif
 
+#if defined(CONFIG_DEEP_SLEEP)
+void board_mem_sleep_setup(void)
+{
+	void __iomem *qixis_base = (void *)QIXIS_BASE;
+
+	/* does not provide HW signals for power management */
+	clrbits_8(qixis_base + 0x21, 0x2);
+	udelay(1);
+}
+#endif
+
 phys_size_t initdram(int board_type)
 {
 	phys_size_t dram_size;
@@ -159,6 +171,11 @@ phys_size_t initdram(int board_type)
 #else
 	dram_size =  fsl_ddr_sdram_size();
 #endif
+
+#if defined(CONFIG_DEEP_SLEEP) && !defined(CONFIG_SPL_BUILD)
+	fsl_dp_resume();
+#endif
+
 	return dram_size;
 }
 
diff --git a/board/freescale/ls1021aqds/ls1021aqds.c b/board/freescale/ls1021aqds/ls1021aqds.c
index f08e54f178..20eade4651 100644
--- a/board/freescale/ls1021aqds/ls1021aqds.c
+++ b/board/freescale/ls1021aqds/ls1021aqds.c
@@ -20,6 +20,7 @@
 #include <fsl_sec.h>
 #include <spl.h>
 
+#include "../common/sleep.h"
 #include "../common/qixis.h"
 #include "ls1021aqds_qixis.h"
 #ifdef CONFIG_U_QE
@@ -48,6 +49,12 @@ enum {
 	MUX_TYPE_SD_PC_SG_SG,
 };
 
+enum {
+	GE0_CLK125,
+	GE2_CLK125,
+	GE1_CLK125,
+};
+
 int checkboard(void)
 {
 #ifndef CONFIG_QSPI_BOOT
@@ -177,7 +184,6 @@ int board_early_init_f(void)
 
 #ifdef CONFIG_TSEC_ENET
 	out_be32(&scfg->etsecdmamcr, SCFG_ETSECDMAMCR_LE_BD_FR);
-	out_be32(&scfg->etsecmcr, SCFG_ETSECCMCR_GE2_CLK125);
 #endif
 
 #ifdef CONFIG_FSL_IFC
@@ -188,6 +194,24 @@ int board_early_init_f(void)
 	out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL);
 #endif
 
+#ifdef CONFIG_FSL_DCU_FB
+	out_be32(&scfg->pixclkcr, SCFG_PIXCLKCR_PXCKEN);
+#endif
+
+	/*
+	 * Enable snoop requests and DVM message requests for
+	 * Slave insterface S4 (A7 core cluster)
+	 */
+	out_le32(&cci->slave[4].snoop_ctrl,
+		 CCI400_DVM_MESSAGE_REQ_EN | CCI400_SNOOP_REQ_EN);
+
+	/*
+	 * Set CCI-400 Slave interface S1, S2 Shareable Override Register
+	 * All transactions are treated as non-shareable
+	 */
+	out_le32(&cci->slave[1].sha_ord, CCI400_SHAORD_NON_SHAREABLE);
+	out_le32(&cci->slave[2].sha_ord, CCI400_SHAORD_NON_SHAREABLE);
+
 	/* Workaround for the issue that DDR could not respond to
 	 * barrier transaction which is generated by executing DSB/ISB
 	 * instruction. Set CCI-400 control override register to
@@ -195,6 +219,11 @@ int board_early_init_f(void)
 	 * allow barrier transaction to DDR again */
 	out_le32(&cci->ctrl_ord, CCI400_CTRLORD_TERM_BARRIER);
 
+#if defined(CONFIG_DEEP_SLEEP)
+	if (is_warm_boot())
+		fsl_dp_disable_console();
+#endif
+
 	return 0;
 }
 
@@ -219,9 +248,6 @@ void board_init_f(ulong dummy)
 		 pinctl);
 #endif
 
-	/* Set global data pointer */
-	gd = &gdata;
-
 	/* Clear the BSS */
 	memset(__bss_start, 0, __bss_end - __bss_start);
 
@@ -231,6 +257,11 @@ void board_init_f(ulong dummy)
 
 	get_clocks();
 
+#if defined(CONFIG_DEEP_SLEEP)
+	if (is_warm_boot())
+		fsl_dp_disable_console();
+#endif
+
 	preloader_console_init();
 
 #ifdef CONFIG_SPL_I2C_SUPPORT
@@ -244,6 +275,32 @@ void board_init_f(ulong dummy)
 }
 #endif
 
+void config_etseccm_source(int etsec_gtx_125_mux)
+{
+	struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
+
+	switch (etsec_gtx_125_mux) {
+	case GE0_CLK125:
+		out_be32(&scfg->etsecmcr, SCFG_ETSECCMCR_GE0_CLK125);
+		debug("etseccm set to GE0_CLK125\n");
+		break;
+
+	case GE2_CLK125:
+		out_be32(&scfg->etsecmcr, SCFG_ETSECCMCR_GE2_CLK125);
+		debug("etseccm set to GE2_CLK125\n");
+		break;
+
+	case GE1_CLK125:
+		out_be32(&scfg->etsecmcr, SCFG_ETSECCMCR_GE1_CLK125);
+		debug("etseccm set to GE1_CLK125\n");
+		break;
+
+	default:
+		printf("Error! trying to set etseccm to invalid value\n");
+		break;
+	}
+}
+
 int config_board_mux(int ctrl_type)
 {
 	u8 reg12, reg14;
@@ -253,6 +310,7 @@ int config_board_mux(int ctrl_type)
 
 	switch (ctrl_type) {
 	case MUX_TYPE_CAN:
+		config_etseccm_source(GE2_CLK125);
 		reg14 = SET_EC_MUX_SEL(reg14, PIN_MUX_SEL_CAN);
 		break;
 	case MUX_TYPE_IIC2:
@@ -262,6 +320,7 @@ int config_board_mux(int ctrl_type)
 		reg14 = SET_EC_MUX_SEL(reg14, PIN_MUX_SEL_RGMII);
 		break;
 	case MUX_TYPE_SAI:
+		config_etseccm_source(GE2_CLK125);
 		reg14 = SET_EC_MUX_SEL(reg14, PIN_MUX_SEL_SAI);
 		break;
 	case MUX_TYPE_SDHC:
@@ -474,13 +533,6 @@ int board_init(void)
 	/* Set CCI-400 control override register to
 	 * enable barrier transaction */
 	out_le32(&cci->ctrl_ord, CCI400_CTRLORD_EN_BARRIER);
-	/*
-	 * Set CCI-400 Slave interface S0, S1, S2 Shareable Override Register
-	 * All transactions are treated as non-shareable
-	 */
-	out_le32(&cci->slave[0].sha_ord, CCI400_SHAORD_NON_SHAREABLE);
-	out_le32(&cci->slave[1].sha_ord, CCI400_SHAORD_NON_SHAREABLE);
-	out_le32(&cci->slave[2].sha_ord, CCI400_SHAORD_NON_SHAREABLE);
 
 	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
 
@@ -503,6 +555,21 @@ int board_init(void)
 	return 0;
 }
 
+#if defined(CONFIG_DEEP_SLEEP)
+void board_sleep_prepare(void)
+{
+	struct ccsr_cci400 __iomem *cci = (void *)CONFIG_SYS_CCI400_ADDR;
+
+	/* Set CCI-400 control override register to
+	 * enable barrier transaction */
+	out_le32(&cci->ctrl_ord, CCI400_CTRLORD_EN_BARRIER);
+
+#ifdef CONFIG_LS102XA_NS_ACCESS
+	enable_devices_ns_access(ns_dev, ARRAY_SIZE(ns_dev));
+#endif
+}
+#endif
+
 int ft_board_setup(void *blob, bd_t *bd)
 {
 	ft_cpu_setup(blob, bd);
diff --git a/board/freescale/ls1021aqds/ls1021aqds_qixis.h b/board/freescale/ls1021aqds/ls1021aqds_qixis.h
index 09b3be2f9c..8e482eb0b0 100644
--- a/board/freescale/ls1021aqds/ls1021aqds_qixis.h
+++ b/board/freescale/ls1021aqds/ls1021aqds_qixis.h
@@ -32,4 +32,6 @@
 
 #define QIXIS_SRDS1CLK_100		0x0
 
+#define QIXIS_DCU_BRDCFG5		0x55
+
 #endif
diff --git a/board/freescale/ls1021atwr/MAINTAINERS b/board/freescale/ls1021atwr/MAINTAINERS
index 91767065fa..e9f6f0a973 100644
--- a/board/freescale/ls1021atwr/MAINTAINERS
+++ b/board/freescale/ls1021atwr/MAINTAINERS
@@ -5,5 +5,6 @@ F:	board/freescale/ls1021atwr/
 F:	include/configs/ls1021atwr.h
 F:	configs/ls1021atwr_nor_defconfig
 F:	configs/ls1021atwr_nor_SECURE_BOOT_defconfig
+F:	configs/ls1021atwr_nor_lpuart_defconfig
 F:	configs/ls1021atwr_sdcard_defconfig
 F:	configs/ls1021atwr_qspi_defconfig
diff --git a/board/freescale/ls1021atwr/ls1021atwr.c b/board/freescale/ls1021atwr/ls1021atwr.c
index 8ab229ddf0..bc8b00686c 100644
--- a/board/freescale/ls1021atwr/ls1021atwr.c
+++ b/board/freescale/ls1021atwr/ls1021atwr.c
@@ -263,6 +263,7 @@ int config_serdes_mux(void)
 int board_early_init_f(void)
 {
 	struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
+	struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
 
 #ifdef CONFIG_TSEC_ENET
 	out_be32(&scfg->etsecdmamcr, SCFG_ETSECDMAMCR_LE_BD_FR);
@@ -281,15 +282,26 @@ int board_early_init_f(void)
 	out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL);
 #endif
 
+	/*
+	 * Enable snoop requests and DVM message requests for
+	 * Slave insterface S4 (A7 core cluster)
+	 */
+	out_le32(&cci->slave[4].snoop_ctrl,
+		 CCI400_DVM_MESSAGE_REQ_EN | CCI400_SNOOP_REQ_EN);
+
+	/*
+	 * Set CCI-400 Slave interface S1, S2 Shareable Override Register
+	 * All transactions are treated as non-shareable
+	 */
+	out_le32(&cci->slave[1].sha_ord, CCI400_SHAORD_NON_SHAREABLE);
+	out_le32(&cci->slave[2].sha_ord, CCI400_SHAORD_NON_SHAREABLE);
+
 	return 0;
 }
 
 #ifdef CONFIG_SPL_BUILD
 void board_init_f(ulong dummy)
 {
-	/* Set global data pointer */
-	gd = &gdata;
-
 	/* Clear the BSS */
 	memset(__bss_start, 0, __bss_end - __bss_start);
 
@@ -408,16 +420,6 @@ struct smmu_stream_id dev_stream_id[] = {
 
 int board_init(void)
 {
-	struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
-
-	/*
-	 * Set CCI-400 Slave interface S0, S1, S2 Shareable Override Register
-	 * All transactions are treated as non-shareable
-	 */
-	out_le32(&cci->slave[0].sha_ord, CCI400_SHAORD_NON_SHAREABLE);
-	out_le32(&cci->slave[1].sha_ord, CCI400_SHAORD_NON_SHAREABLE);
-	out_le32(&cci->slave[2].sha_ord, CCI400_SHAORD_NON_SHAREABLE);
-
 #ifndef CONFIG_SYS_FSL_NO_SERDES
 	fsl_serdes_init();
 #ifndef CONFIG_QSPI_BOOT
diff --git a/board/freescale/mpc8360emds/Kconfig b/board/freescale/mpc8360emds/Kconfig
deleted file mode 100644
index 3f4f95cac2..0000000000
--- a/board/freescale/mpc8360emds/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_MPC8360EMDS
-
-config SYS_BOARD
-	default "mpc8360emds"
-
-config SYS_VENDOR
-	default "freescale"
-
-config SYS_CONFIG_NAME
-	default "MPC8360EMDS"
-
-endif
diff --git a/board/freescale/mpc8360emds/MAINTAINERS b/board/freescale/mpc8360emds/MAINTAINERS
deleted file mode 100644
index 91ff2ef4e8..0000000000
--- a/board/freescale/mpc8360emds/MAINTAINERS
+++ /dev/null
@@ -1,15 +0,0 @@
-MPC8360EMDS BOARD
-M:	Dave Liu <daveliu@freescale.com>
-S:	Maintained
-F:	board/freescale/mpc8360emds/
-F:	include/configs/MPC8360EMDS.h
-F:	configs/MPC8360EMDS_33_defconfig
-F:	configs/MPC8360EMDS_33_ATM_defconfig
-F:	configs/MPC8360EMDS_33_HOST_33_defconfig
-F:	configs/MPC8360EMDS_33_HOST_66_defconfig
-F:	configs/MPC8360EMDS_33_SLAVE_defconfig
-F:	configs/MPC8360EMDS_66_defconfig
-F:	configs/MPC8360EMDS_66_ATM_defconfig
-F:	configs/MPC8360EMDS_66_HOST_33_defconfig
-F:	configs/MPC8360EMDS_66_HOST_66_defconfig
-F:	configs/MPC8360EMDS_66_SLAVE_defconfig
diff --git a/board/freescale/mpc8360emds/Makefile b/board/freescale/mpc8360emds/Makefile
deleted file mode 100644
index e8332cea3f..0000000000
--- a/board/freescale/mpc8360emds/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y += mpc8360emds.o
-obj-$(CONFIG_PCI) += pci.o
diff --git a/board/freescale/mpc8360emds/README b/board/freescale/mpc8360emds/README
deleted file mode 100644
index 6afa753969..0000000000
--- a/board/freescale/mpc8360emds/README
+++ /dev/null
@@ -1,155 +0,0 @@
-Freescale MPC8360EMDS Board
------------------------------------------
-1.	Board Switches and Jumpers
-1.0	There are four Dual-In-Line Packages(DIP) Switches on MPC8360EMDS board
-	For some reason, the HW designers describe the switch settings
-	in terms of 0 and 1, and then map that to physical switches where
-	the label "On" refers to logic 0 and "Off" is logic 1.
-
-	Switch bits are numbered 1 through, like, 4 6 8 or 10, but the
-	bits may contribute to signals that are numbered based at 0,
-	and some of those signals may be high-bit-number-0 too.  Heed
-	well the names and labels and do not get confused.
-
-		"Off" == 1
-		"On"  == 0
-
-	SW18 is switch 18 as silk-screened onto the board.
-	SW4[8] is the bit labeled 8 on Switch 4.
-	SW2[1:6] refers to bits labeled 1 through 6 in order on switch 2.
-	SW3[7:1] refers to bits labeled 7 through 1 in order on switch 3.
-	SW3[1:8]= 0000_0001 refers to bits labeled 1 through 6 is set as "On"
-		and bits labeled 8 is set as "Off".
-
-1.1	There are three type boards for MPC8360E silicon up to now, They are
-
-	* MPC8360E-MDS-PB PROTO (a.k.a 8360SYS PROTOTYPE)
-	* MPC8360E-MDS-PB PILOT (a.k.a 8360SYS PILOT)
-	* MPC8360EA-MDS-PB PROTO (a.k.a 8360SYS2 PROTOTYPE)
-
-1.2	For all the MPC8360EMDS Board
-
-	First, make sure the board default setting is consistent with the
-	document shipped with your board. Then apply the following setting:
-	SW3[1-8]= 0000_0100  (HRCW setting value is performed on local bus)
-	SW4[1-8]= 0011_0000  (Flash boot on local bus)
-	SW9[1-8]= 0110_0110  (PCI Mode enabled. HRCW is read from FLASH)
-	SW10[1-8]= 0000_1000  (core PLL setting)
-	SW11[1-8]= 0000_0100 (SW11 is on the another side of the board)
-	JP6 1-2
-	on board Oscillator: 66M
-
-1.3	Since different board/chip rev. combinations have AC timing issues,
-	u-boot forces RGMII-ID (RGMII with Internal Delay) mode on by default
-	by the patch (mpc83xx: Disable G1TXCLK, G2TXCLK h/w buffers).
-
-	When the rev2.x silicon mount on these boards, and if you are using
-	u-boot version after this patch, to make the ethernet interfaces usable,
-	and to enable RGMII-ID on your board, you have to setup the jumpers
-	correctly.
-
-	* MPC8360E-MDS-PB PROTO
-	  nothing to do
-	* MPC8360E-MDS-PB PILOT
-	  JP9 and JP8 should be ON
-	* MPC8360EA-MDS-PB PROTO
-	  JP2 and JP3 should be ON
-
-2.	Memory Map
-
-2.1.	The memory map should look pretty much like this:
-
-	0x0000_0000	0x7fff_ffff	DDR			2G
-	0x8000_0000	0x8fff_ffff	PCI MEM prefetch	256M
-	0x9000_0000	0x9fff_ffff	PCI MEM non-prefetch	256M
-	0xc000_0000	0xdfff_ffff	Empty			512M
-	0xe000_0000	0xe01f_ffff	Int Mem Reg Space	2M
-	0xe020_0000	0xe02f_ffff	Empty			1M
-	0xe030_0000	0xe03f_ffff	PCI IO			1M
-	0xe040_0000	0xefff_ffff	Empty			252M
-	0xf000_0000	0xf3ff_ffff	Local Bus SDRAM		64M
-	0xf400_0000	0xf7ff_ffff	Empty			64M
-	0xf800_0000	0xf800_7fff	BCSR on CS1		32K
-	0xf800_8000	0xf800_ffff	PIB CS4			32K
-	0xf801_0000	0xf801_7fff	PIB CS5			32K
-	0xfe00_0000	0xfeff_ffff	FLASH on CS0		16M
-
-
-3. Definitions
-
-3.1 Explanation of NEW definitions in:
-
-	include/configs/MPC8360EMDS.h
-
-    CONFIG_MPC83xx	    MPC83xx family for both MPC8349 and MPC8360
-    CONFIG_MPC8360	    MPC8360 specific
-    CONFIG_MPC8360EMDS	    MPC8360EMDS board specific
-
-4. Compilation
-
-	MPC8360EMDS shipped with 33.33MHz or 66MHz oscillator(check U41 chip).
-
-	Assuming you're using BASH shell:
-
-		export CROSS_COMPILE=your-cross-compile-prefix
-		cd u-boot
-		make distclean
-		make MPC8360EMDS_XX_config
-		make
-
-	MPC8360EMDS support ATM, PCI in host and slave mode.
-
-	To make u-boot support ATM :
-	1) Make MPC8360EMDS_XX_ATM_config
-
-	To make u-boot support PCI host 66M :
-	1) DIP SW support PCI mode as described in Section 1.1.
-	2) Make MPC8360EMDS_XX_HOST_66_config
-
-	To make u-boot support PCI host 33M :
-	1) DIP SW setting is similar as Section 1.1, except for SW3[4] is 1
-	2) Make MPC8360EMDS_XX_HOST_33_config
-
-	To make u-boot support PCI slave 66M :
-	1) DIP SW setting is similar as Section 1.1, except for SW9[3] is 1
-	2) Make MPC8360EMDS_XX_SLAVE_config
-
-	(where XX is:
-	   33 - 33.33MHz oscillator
-	   66 - 66MHz oscillator)
-
-5. Downloading and Flashing Images
-
-5.0 Download over serial line using Kermit:
-
-	loadb
-	[Drop to kermit:
-	    ^\c
-	    send <u-boot-bin-image>
-	    c
-	]
-
-
-    Or via tftp:
-
-	tftp 10000 u-boot.bin
-
-5.1 Reflash U-boot Image using U-boot
-
-	tftp 20000 u-boot.bin
-	protect off fef00000 fef3ffff
-	erase fef00000 fef3ffff
-
-	cp.b 20000 fef00000 xxxx
-
-	or
-
-	cp.b 20000 fef00000 3ffff
-
-
-You have to supply the correct byte count with 'xxxx' from the TFTP result log.
-Maybe 3ffff will work too, that corresponds to the erased sectors.
-
-
-6. Notes
-	1) The console baudrate for MPC8360EMDS is 115200bps.
diff --git a/board/freescale/mpc8360emds/mpc8360emds.c b/board/freescale/mpc8360emds/mpc8360emds.c
deleted file mode 100644
index f0a55f8a8d..0000000000
--- a/board/freescale/mpc8360emds/mpc8360emds.c
+++ /dev/null
@@ -1,453 +0,0 @@
-/*
- * Copyright (C) 2006,2010-2011 Freescale Semiconductor, Inc.
- * Dave Liu <daveliu@freescale.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <ioports.h>
-#include <mpc83xx.h>
-#include <i2c.h>
-#include <miiphy.h>
-#include <phy.h>
-#include <fsl_mdio.h>
-#if defined(CONFIG_PCI)
-#include <pci.h>
-#endif
-#include <spd_sdram.h>
-#include <asm/mmu.h>
-#include <asm/io.h>
-#include <asm/mmu.h>
-#if defined(CONFIG_OF_LIBFDT)
-#include <libfdt.h>
-#endif
-#include <hwconfig.h>
-#include <fdt_support.h>
-#if defined(CONFIG_PQ_MDS_PIB)
-#include "../common/pq-mds-pib.h"
-#endif
-#include "../../../drivers/qe/uec.h"
-
-const qe_iop_conf_t qe_iop_conf_tab[] = {
-	/* GETH1 */
-	{0,  3, 1, 0, 1}, /* TxD0 */
-	{0,  4, 1, 0, 1}, /* TxD1 */
-	{0,  5, 1, 0, 1}, /* TxD2 */
-	{0,  6, 1, 0, 1}, /* TxD3 */
-	{1,  6, 1, 0, 3}, /* TxD4 */
-	{1,  7, 1, 0, 1}, /* TxD5 */
-	{1,  9, 1, 0, 2}, /* TxD6 */
-	{1, 10, 1, 0, 2}, /* TxD7 */
-	{0,  9, 2, 0, 1}, /* RxD0 */
-	{0, 10, 2, 0, 1}, /* RxD1 */
-	{0, 11, 2, 0, 1}, /* RxD2 */
-	{0, 12, 2, 0, 1}, /* RxD3 */
-	{0, 13, 2, 0, 1}, /* RxD4 */
-	{1,  1, 2, 0, 2}, /* RxD5 */
-	{1,  0, 2, 0, 2}, /* RxD6 */
-	{1,  4, 2, 0, 2}, /* RxD7 */
-	{0,  7, 1, 0, 1}, /* TX_EN */
-	{0,  8, 1, 0, 1}, /* TX_ER */
-	{0, 15, 2, 0, 1}, /* RX_DV */
-	{0, 16, 2, 0, 1}, /* RX_ER */
-	{0,  0, 2, 0, 1}, /* RX_CLK */
-	{2,  9, 1, 0, 3}, /* GTX_CLK - CLK10 */
-	{2,  8, 2, 0, 1}, /* GTX125 - CLK9 */
-	/* GETH2 */
-	{0, 17, 1, 0, 1}, /* TxD0 */
-	{0, 18, 1, 0, 1}, /* TxD1 */
-	{0, 19, 1, 0, 1}, /* TxD2 */
-	{0, 20, 1, 0, 1}, /* TxD3 */
-	{1,  2, 1, 0, 1}, /* TxD4 */
-	{1,  3, 1, 0, 2}, /* TxD5 */
-	{1,  5, 1, 0, 3}, /* TxD6 */
-	{1,  8, 1, 0, 3}, /* TxD7 */
-	{0, 23, 2, 0, 1}, /* RxD0 */
-	{0, 24, 2, 0, 1}, /* RxD1 */
-	{0, 25, 2, 0, 1}, /* RxD2 */
-	{0, 26, 2, 0, 1}, /* RxD3 */
-	{0, 27, 2, 0, 1}, /* RxD4 */
-	{1, 12, 2, 0, 2}, /* RxD5 */
-	{1, 13, 2, 0, 3}, /* RxD6 */
-	{1, 11, 2, 0, 2}, /* RxD7 */
-	{0, 21, 1, 0, 1}, /* TX_EN */
-	{0, 22, 1, 0, 1}, /* TX_ER */
-	{0, 29, 2, 0, 1}, /* RX_DV */
-	{0, 30, 2, 0, 1}, /* RX_ER */
-	{0, 31, 2, 0, 1}, /* RX_CLK */
-	{2,  2, 1, 0, 2}, /* GTX_CLK = CLK10 */
-	{2,  3, 2, 0, 1}, /* GTX125 - CLK4 */
-
-	{0,  1, 3, 0, 2}, /* MDIO */
-	{0,  2, 1, 0, 1}, /* MDC */
-
-	{5,  0, 1, 0, 2}, /* UART2_SOUT */
-	{5,  1, 2, 0, 3}, /* UART2_CTS */
-	{5,  2, 1, 0, 1}, /* UART2_RTS */
-	{5,  3, 2, 0, 2}, /* UART2_SIN */
-
-	{0,  0, 0, 0, QE_IOP_TAB_END}, /* END of table */
-};
-
-/* Handle "mpc8360ea rev.2.1 erratum 2: RGMII Timing"? */
-static int board_handle_erratum2(void)
-{
-	const immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
-
-	return REVID_MAJOR(immr->sysconf.spridr) == 2 &&
-	       REVID_MINOR(immr->sysconf.spridr) == 1;
-}
-
-int board_early_init_f(void)
-{
-	const immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
-	u8 *bcsr = (u8 *)CONFIG_SYS_BCSR;
-
-	/* Enable flash write */
-	bcsr[0xa] &= ~0x04;
-
-	/* Disable G1TXCLK, G2TXCLK h/w buffers (rev.2.x h/w bug workaround) */
-	if (REVID_MAJOR(immr->sysconf.spridr) == 2)
-		bcsr[0xe] = 0x30;
-
-	/* Enable second UART */
-	bcsr[0x9] &= ~0x01;
-
-	if (board_handle_erratum2()) {
-		void *immap = (immap_t *)(CONFIG_SYS_IMMR + 0x14a8);
-
-		/*
-		 * IMMR + 0x14A8[4:5] = 11 (clk delay for UCC 2)
-		 * IMMR + 0x14A8[18:19] = 11 (clk delay for UCC 1)
-		 */
-		setbits_be32(immap, 0x0c003000);
-
-		/*
-		 * IMMR + 0x14AC[20:27] = 10101010
-		 * (data delay for both UCC's)
-		 */
-		clrsetbits_be32(immap + 4, 0xff0, 0xaa0);
-	}
-	return 0;
-}
-
-int board_early_init_r(void)
-{
-	gd_t *gd;
-#ifdef CONFIG_PQ_MDS_PIB
-	pib_init();
-#endif
-	/*
-	 * BAT6 is used for SDRAM when DDR size is 512MB or larger than 256MB
-	 * So re-setup PCI MEM space used BAT5 after relocated to DDR
-	 */
-	gd = (gd_t *)(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
-	if (gd->ram_size > CONFIG_MAX_MEM_MAPPED) {
-		write_bat(DBAT5, CONFIG_SYS_DBAT6U, CONFIG_SYS_DBAT6L);
-		write_bat(IBAT5, CONFIG_SYS_IBAT6U, CONFIG_SYS_IBAT6L);
-	}
-
-	return 0;
-}
-
-#ifdef CONFIG_UEC_ETH
-static uec_info_t uec_info[] = {
-#ifdef CONFIG_UEC_ETH1
-	STD_UEC_INFO(1),
-#endif
-#ifdef CONFIG_UEC_ETH2
-	STD_UEC_INFO(2),
-#endif
-};
-
-int board_eth_init(bd_t *bd)
-{
-	if (board_handle_erratum2()) {
-		int i;
-
-		for (i = 0; i < ARRAY_SIZE(uec_info); i++) {
-			uec_info[i].enet_interface_type =
-				PHY_INTERFACE_MODE_RGMII_RXID;
-			uec_info[i].speed = SPEED_1000;
-		}
-	}
-	return uec_eth_init(bd, uec_info, ARRAY_SIZE(uec_info));
-}
-#endif /* CONFIG_UEC_ETH */
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-extern void ddr_enable_ecc(unsigned int dram_size);
-#endif
-int fixed_sdram(void);
-static int sdram_init(unsigned int base);
-
-phys_size_t initdram(int board_type)
-{
-	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
-	u32 msize = 0;
-	u32 lbc_sdram_size;
-
-	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
-		return -1;
-
-	/* DDR SDRAM - Main SODIMM */
-	im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR;
-#if defined(CONFIG_SPD_EEPROM)
-	msize = spd_sdram();
-#else
-	msize = fixed_sdram();
-#endif
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-	/*
-	 * Initialize DDR ECC byte
-	 */
-	ddr_enable_ecc(msize * 1024 * 1024);
-#endif
-	/*
-	 * Initialize SDRAM if it is on local bus.
-	 */
-	lbc_sdram_size = sdram_init(msize * 1024 * 1024);
-	if (!msize)
-		msize = lbc_sdram_size;
-
-	/* return total bus SDRAM size(bytes)  -- DDR */
-	return (msize * 1024 * 1024);
-}
-
-#if !defined(CONFIG_SPD_EEPROM)
-/*************************************************************************
- *  fixed sdram init -- doesn't use serial presence detect.
- ************************************************************************/
-int fixed_sdram(void)
-{
-	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
-	u32 msize = CONFIG_SYS_DDR_SIZE;
-	u32 ddr_size = msize << 20;
-	u32 ddr_size_log2 = __ilog2(ddr_size);
-	u32 half_ddr_size = ddr_size >> 1;
-
-	im->sysconf.ddrlaw[0].bar =
-		CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000;
-	im->sysconf.ddrlaw[0].ar =
-		LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
-#if (CONFIG_SYS_DDR_SIZE != 256)
-#warning Currenly any ddr size other than 256 is not supported
-#endif
-#ifdef CONFIG_DDR_II
-	im->ddr.csbnds[0].csbnds = CONFIG_SYS_DDR_CS0_BNDS;
-	im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG;
-	im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
-	im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
-	im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
-	im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
-	im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG;
-	im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2;
-	im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
-	im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2;
-	im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
-	im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CNTL;
-#else
-
-#if ((CONFIG_SYS_DDR_SDRAM_BASE & 0x00FFFFFF) != 0)
-#warning Chip select bounds is only configurable in 16MB increments
-#endif
-	im->ddr.csbnds[0].csbnds =
-		((CONFIG_SYS_DDR_SDRAM_BASE >> CSBNDS_SA_SHIFT) & CSBNDS_SA) |
-		(((CONFIG_SYS_DDR_SDRAM_BASE + half_ddr_size - 1) >>
-				CSBNDS_EA_SHIFT) & CSBNDS_EA);
-	im->ddr.csbnds[1].csbnds =
-		(((CONFIG_SYS_DDR_SDRAM_BASE + half_ddr_size) >>
-				CSBNDS_SA_SHIFT) & CSBNDS_SA) |
-		(((CONFIG_SYS_DDR_SDRAM_BASE + ddr_size - 1) >>
-				CSBNDS_EA_SHIFT) & CSBNDS_EA);
-
-	im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG;
-	im->ddr.cs_config[1] = CONFIG_SYS_DDR_CS1_CONFIG;
-
-	im->ddr.cs_config[2] = 0;
-	im->ddr.cs_config[3] = 0;
-
-	im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
-	im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
-	im->ddr.sdram_cfg = CONFIG_SYS_DDR_CONTROL;
-
-	im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
-	im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
-#endif
-	udelay(200);
-	im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
-
-	return msize;
-}
-#endif				/*!CONFIG_SYS_SPD_EEPROM */
-
-int checkboard(void)
-{
-	puts("Board: Freescale MPC8360EMDS\n");
-	return 0;
-}
-
-/*
- * if MPC8360EMDS is soldered with SDRAM
- */
-#ifdef CONFIG_SYS_LB_SDRAM
-/*
- * Initialize SDRAM memory on the Local Bus.
- */
-
-static int sdram_init(unsigned int base)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	fsl_lbc_t *lbc = LBC_BASE_ADDR;
-	const int sdram_size = CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024;
-	int rem = base % sdram_size;
-	uint *sdram_addr;
-
-	/* window base address should be aligned to the window size */
-	if (rem)
-		base = base - rem + sdram_size;
-
-	/*
-	 * Setup BAT6 for SDRAM when DDR size is 512MB or larger than 256MB
-	 * After relocated to DDR, reuse BAT5 for PCI MEM space
-	 */
-	if (base > CONFIG_MAX_MEM_MAPPED) {
-		unsigned long batl = base | BATL_PP_10 | BATL_MEMCOHERENCE;
-		unsigned long batu = base | BATU_BL_64M | BATU_VS | BATU_VP;
-
-		/* Setup the BAT6 for SDRAM */
-		write_bat(DBAT6, batu, batl);
-		write_bat(IBAT6, batu, batl);
-	}
-
-	sdram_addr = (uint *)base;
-	/*
-	 * Setup SDRAM Base and Option Registers
-	 */
-	set_lbc_br(2, base | CONFIG_SYS_BR2);
-	set_lbc_or(2, CONFIG_SYS_OR2);
-	immap->sysconf.lblaw[2].bar = base;
-	immap->sysconf.lblaw[2].ar = CONFIG_SYS_LBLAWAR2;
-
-	/*setup mtrpt, lsrt and lbcr for LB bus */
-	lbc->lbcr = CONFIG_SYS_LBC_LBCR;
-	lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
-	lbc->lsrt = CONFIG_SYS_LBC_LSRT;
-	asm("sync");
-
-	/*
-	 * Configure the SDRAM controller Machine Mode Register.
-	 */
-	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5;	/* Normal Operation */
-	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1;	/* Precharge All Banks */
-	asm("sync");
-	*sdram_addr = 0xff;
-	udelay(100);
-
-	/*
-	 * We need do 8 times auto refresh operation.
-	 */
-	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_2;
-	asm("sync");
-	*sdram_addr = 0xff;	/* 1 times */
-	udelay(100);
-	*sdram_addr = 0xff;	/* 2 times */
-	udelay(100);
-	*sdram_addr = 0xff;	/* 3 times */
-	udelay(100);
-	*sdram_addr = 0xff;	/* 4 times */
-	udelay(100);
-	*sdram_addr = 0xff;	/* 5 times */
-	udelay(100);
-	*sdram_addr = 0xff;	/* 6 times */
-	udelay(100);
-	*sdram_addr = 0xff;	/* 7 times */
-	udelay(100);
-	*sdram_addr = 0xff;	/* 8 times */
-	udelay(100);
-
-	/* Mode register write operation */
-	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_4;
-	asm("sync");
-	*(sdram_addr + 0xcc) = 0xff;
-	udelay(100);
-
-	/* Normal operation */
-	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5 | 0x40000000;
-	asm("sync");
-	*sdram_addr = 0xff;
-	udelay(100);
-
-	/*
-	 * In non-aligned case we don't [normally] use that memory because
-	 * there is a hole.
-	 */
-	if (rem)
-		return 0;
-	return CONFIG_SYS_LBC_SDRAM_SIZE;
-}
-#else
-static int sdram_init(unsigned int base) { return 0; }
-#endif
-
-#if defined(CONFIG_OF_BOARD_SETUP)
-static void ft_board_fixup_qe_usb(void *blob, bd_t *bd)
-{
-	if (!hwconfig_subarg_cmp("qe_usb", "mode", "peripheral"))
-		return;
-
-	do_fixup_by_compat(blob, "fsl,mpc8323-qe-usb", "mode",
-			   "peripheral", sizeof("peripheral"), 1);
-}
-
-int ft_board_setup(void *blob, bd_t *bd)
-{
-	ft_cpu_setup(blob, bd);
-#ifdef CONFIG_PCI
-	ft_pci_setup(blob, bd);
-#endif
-	ft_board_fixup_qe_usb(blob, bd);
-	/*
-	 * mpc8360ea pb mds errata 2: RGMII timing
-	 * if on mpc8360ea rev. 2.1,
-	 * change both ucc phy-connection-types from rgmii-id to rgmii-rxid
-	 */
-	if (board_handle_erratum2()) {
-		int nodeoffset;
-		const char *prop;
-		int path;
-
-		nodeoffset = fdt_path_offset(blob, "/aliases");
-		if (nodeoffset >= 0) {
-#if defined(CONFIG_HAS_ETH0)
-			/* fixup UCC 1 if using rgmii-id mode */
-			prop = fdt_getprop(blob, nodeoffset, "ethernet0", NULL);
-			if (prop) {
-				path = fdt_path_offset(blob, prop);
-				prop = fdt_getprop(blob, path,
-						   "phy-connection-type", 0);
-				if (prop && (strcmp(prop, "rgmii-id") == 0))
-					fdt_fixup_phy_connection(blob, path,
-						PHY_INTERFACE_MODE_RGMII_RXID);
-			}
-#endif
-#if defined(CONFIG_HAS_ETH1)
-			/* fixup UCC 2 if using rgmii-id mode */
-			prop = fdt_getprop(blob, nodeoffset, "ethernet1", NULL);
-			if (prop) {
-				path = fdt_path_offset(blob, prop);
-				prop = fdt_getprop(blob, path,
-						   "phy-connection-type", 0);
-				if (prop && (strcmp(prop, "rgmii-id") == 0))
-					fdt_fixup_phy_connection(blob, path,
-						PHY_INTERFACE_MODE_RGMII_RXID);
-			}
-#endif
-		}
-	}
-
-	return 0;
-}
-#endif
diff --git a/board/freescale/mpc8360emds/pci.c b/board/freescale/mpc8360emds/pci.c
deleted file mode 100644
index 71244df079..0000000000
--- a/board/freescale/mpc8360emds/pci.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * Copyright (C) 2006-2009 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * PCI Configuration space access support for MPC83xx PCI Bridge
- */
-
-#include <asm/mmu.h>
-#include <asm/io.h>
-#include <common.h>
-#include <mpc83xx.h>
-#include <pci.h>
-#include <i2c.h>
-#include <asm/fsl_i2c.h>
-#include "../common/pq-mds-pib.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static struct pci_region pci1_regions[] = {
-	{
-		bus_start: CONFIG_SYS_PCI1_MEM_BASE,
-		phys_start: CONFIG_SYS_PCI1_MEM_PHYS,
-		size: CONFIG_SYS_PCI1_MEM_SIZE,
-		flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
-	},
-	{
-		bus_start: CONFIG_SYS_PCI1_IO_BASE,
-		phys_start: CONFIG_SYS_PCI1_IO_PHYS,
-		size: CONFIG_SYS_PCI1_IO_SIZE,
-		flags: PCI_REGION_IO
-	},
-	{
-		bus_start: CONFIG_SYS_PCI1_MMIO_BASE,
-		phys_start: CONFIG_SYS_PCI1_MMIO_PHYS,
-		size: CONFIG_SYS_PCI1_MMIO_SIZE,
-		flags: PCI_REGION_MEM
-	},
-};
-
-#ifdef CONFIG_MPC83XX_PCI2
-static struct pci_region pci2_regions[] = {
-	{
-		bus_start: CONFIG_SYS_PCI2_MEM_BASE,
-		phys_start: CONFIG_SYS_PCI2_MEM_PHYS,
-		size: CONFIG_SYS_PCI2_MEM_SIZE,
-		flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
-	},
-	{
-		bus_start: CONFIG_SYS_PCI2_IO_BASE,
-		phys_start: CONFIG_SYS_PCI2_IO_PHYS,
-		size: CONFIG_SYS_PCI2_IO_SIZE,
-		flags: PCI_REGION_IO
-	},
-	{
-		bus_start: CONFIG_SYS_PCI2_MMIO_BASE,
-		phys_start: CONFIG_SYS_PCI2_MMIO_PHYS,
-		size: CONFIG_SYS_PCI2_MMIO_SIZE,
-		flags: PCI_REGION_MEM
-	},
-};
-#endif
-
-void pci_init_board(void)
-#ifdef CONFIG_PCISLAVE
-{
-	volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
-	volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
-	volatile pcictrl83xx_t *pci_ctrl = &immr->pci_ctrl[0];
-	struct pci_region *reg[] = { pci1_regions };
-
-	/* Configure PCI Local Access Windows */
-	pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR;
-	pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_512M;
-
-	pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR;
-	pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_1M;
-
-	mpc83xx_pci_init(1, reg);
-
-	/*
-	 * Configure PCI Inbound Translation Windows
-	 */
-	pci_ctrl[0].pitar0 = 0x0;
-	pci_ctrl[0].pibar0 = 0x0;
-	pci_ctrl[0].piwar0 = PIWAR_EN | PIWAR_RTT_SNOOP |
-	    PIWAR_WTT_SNOOP | PIWAR_IWS_4K;
-
-	pci_ctrl[0].pitar1 = 0x0;
-	pci_ctrl[0].pibar1 = 0x0;
-	pci_ctrl[0].piebar1 = 0x0;
-	pci_ctrl[0].piwar1 &= ~PIWAR_EN;
-
-	pci_ctrl[0].pitar2 = 0x0;
-	pci_ctrl[0].pibar2 = 0x0;
-	pci_ctrl[0].piebar2 = 0x0;
-	pci_ctrl[0].piwar2 &= ~PIWAR_EN;
-
-	/* Unlock the configuration bit */
-	mpc83xx_pcislave_unlock(0);
-	printf("PCI:   Agent mode enabled\n");
-}
-#else
-{
-	volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
-	volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk;
-	volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
-#ifndef CONFIG_MPC83XX_PCI2
-	struct pci_region *reg[] = { pci1_regions };
-#else
-	struct pci_region *reg[] = { pci1_regions, pci2_regions };
-#endif
-
-	/* initialize the PCA9555PW IO expander on the PIB board */
-	pib_init();
-
-#if defined(CONFIG_PCI_66M)
-	clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2;
-	printf("PCI clock is 66MHz\n");
-#elif defined(CONFIG_PCI_33M)
-	clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2 |
-	    OCCR_PCICD0 | OCCR_PCICD1 | OCCR_PCICD2 | OCCR_PCICR;
-	printf("PCI clock is 33MHz\n");
-#else
-	clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2;
-	printf("PCI clock is 66MHz\n");
-#endif
-	udelay(2000);
-
-	/* Configure PCI Local Access Windows */
-	pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR;
-	pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_512M;
-
-	pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR;
-	pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_1M;
-
-	udelay(2000);
-
-#ifndef CONFIG_MPC83XX_PCI2
-	mpc83xx_pci_init(1, reg);
-#else
-	mpc83xx_pci_init(2, reg);
-#endif
-}
-#endif				/* CONFIG_PCISLAVE */
diff --git a/board/freescale/mpc8360erdk/Kconfig b/board/freescale/mpc8360erdk/Kconfig
deleted file mode 100644
index 5c9be7c9c1..0000000000
--- a/board/freescale/mpc8360erdk/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_MPC8360ERDK
-
-config SYS_BOARD
-	default "mpc8360erdk"
-
-config SYS_VENDOR
-	default "freescale"
-
-config SYS_CONFIG_NAME
-	default "MPC8360ERDK"
-
-endif
diff --git a/board/freescale/mpc8360erdk/MAINTAINERS b/board/freescale/mpc8360erdk/MAINTAINERS
deleted file mode 100644
index e5b5995f78..0000000000
--- a/board/freescale/mpc8360erdk/MAINTAINERS
+++ /dev/null
@@ -1,7 +0,0 @@
-MPC8360ERDK BOARD
-#M:	Anton Vorontsov <avorontsov@ru.mvista.com>
-S:	Orphan (since 2014-03)
-F:	board/freescale/mpc8360erdk/
-F:	include/configs/MPC8360ERDK.h
-F:	configs/MPC8360ERDK_defconfig
-F:	configs/MPC8360ERDK_33_defconfig
diff --git a/board/freescale/mpc8360erdk/Makefile b/board/freescale/mpc8360erdk/Makefile
deleted file mode 100644
index e2235c28fe..0000000000
--- a/board/freescale/mpc8360erdk/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y += mpc8360erdk.o
-obj-$(CONFIG_CMD_NAND) += nand.o
diff --git a/board/freescale/mpc8360erdk/mpc8360erdk.c b/board/freescale/mpc8360erdk/mpc8360erdk.c
deleted file mode 100644
index 478f8205a9..0000000000
--- a/board/freescale/mpc8360erdk/mpc8360erdk.c
+++ /dev/null
@@ -1,350 +0,0 @@
-/*
- * Copyright (C) 2006 Freescale Semiconductor, Inc.
- *                    Dave Liu <daveliu@freescale.com>
- *
- * Copyright (C) 2007 Logic Product Development, Inc.
- *                    Peter Barada <peterb@logicpd.com>
- *
- * Copyright (C) 2007 MontaVista Software, Inc.
- *                    Anton Vorontsov <avorontsov@ru.mvista.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <ioports.h>
-#include <mpc83xx.h>
-#include <i2c.h>
-#include <miiphy.h>
-#include <asm/io.h>
-#include <asm/mmu.h>
-#include <pci.h>
-#include <libfdt.h>
-
-const qe_iop_conf_t qe_iop_conf_tab[] = {
-	/* MDIO */
-	{0,  1, 3, 0, 2}, /* MDIO */
-	{0,  2, 1, 0, 1}, /* MDC */
-
-	/* UCC1 - UEC (Gigabit) */
-	{0,  3, 1, 0, 1}, /* TxD0 */
-	{0,  4, 1, 0, 1}, /* TxD1 */
-	{0,  5, 1, 0, 1}, /* TxD2 */
-	{0,  6, 1, 0, 1}, /* TxD3 */
-	{0,  9, 2, 0, 1}, /* RxD0 */
-	{0, 10, 2, 0, 1}, /* RxD1 */
-	{0, 11, 2, 0, 1}, /* RxD2 */
-	{0, 12, 2, 0, 1}, /* RxD3 */
-	{0,  7, 1, 0, 1}, /* TX_EN */
-	{0,  8, 1, 0, 1}, /* TX_ER */
-	{0, 15, 2, 0, 1}, /* RX_DV */
-	{0,  0, 2, 0, 1}, /* RX_CLK */
-	{2,  9, 1, 0, 3}, /* GTX_CLK - CLK10 */
-	{2,  8, 2, 0, 1}, /* GTX125 - CLK9 */
-
-	/* UCC2 - UEC (Gigabit) */
-	{0, 17, 1, 0, 1}, /* TxD0 */
-	{0, 18, 1, 0, 1}, /* TxD1 */
-	{0, 19, 1, 0, 1}, /* TxD2 */
-	{0, 20, 1, 0, 1}, /* TxD3 */
-	{0, 23, 2, 0, 1}, /* RxD0 */
-	{0, 24, 2, 0, 1}, /* RxD1 */
-	{0, 25, 2, 0, 1}, /* RxD2 */
-	{0, 26, 2, 0, 1}, /* RxD3 */
-	{0, 21, 1, 0, 1}, /* TX_EN */
-	{0, 22, 1, 0, 1}, /* TX_ER */
-	{0, 29, 2, 0, 1}, /* RX_DV */
-	{0, 31, 2, 0, 1}, /* RX_CLK */
-	{2,  2, 1, 0, 2}, /* GTX_CLK - CLK10 */
-	{2,  3, 2, 0, 1}, /* GTX125 - CLK4 */
-
-	/* UCC7 - UEC */
-	{4,  0, 1, 0, 1}, /* TxD0 */
-	{4,  1, 1, 0, 1}, /* TxD1 */
-	{4,  2, 1, 0, 1}, /* TxD2 */
-	{4,  3, 1, 0, 1}, /* TxD3 */
-	{4,  6, 2, 0, 1}, /* RxD0 */
-	{4,  7, 2, 0, 1}, /* RxD1 */
-	{4,  8, 2, 0, 1}, /* RxD2 */
-	{4,  9, 2, 0, 1}, /* RxD3 */
-	{4,  4, 1, 0, 1}, /* TX_EN */
-	{4,  5, 1, 0, 1}, /* TX_ER */
-	{4, 12, 2, 0, 1}, /* RX_DV */
-	{4, 13, 2, 0, 1}, /* RX_ER */
-	{4, 10, 2, 0, 1}, /* COL */
-	{4, 11, 2, 0, 1}, /* CRS */
-	{2, 18, 2, 0, 1}, /* TX_CLK - CLK19 */
-	{2, 19, 2, 0, 1}, /* RX_CLK - CLK20 */
-
-	/* UCC4 - UEC */
-	{1, 14, 1, 0, 1}, /* TxD0 */
-	{1, 15, 1, 0, 1}, /* TxD1 */
-	{1, 16, 1, 0, 1}, /* TxD2 */
-	{1, 17, 1, 0, 1}, /* TxD3 */
-	{1, 20, 2, 0, 1}, /* RxD0 */
-	{1, 21, 2, 0, 1}, /* RxD1 */
-	{1, 22, 2, 0, 1}, /* RxD2 */
-	{1, 23, 2, 0, 1}, /* RxD3 */
-	{1, 18, 1, 0, 1}, /* TX_EN */
-	{1, 19, 1, 0, 2}, /* TX_ER */
-	{1, 26, 2, 0, 1}, /* RX_DV */
-	{1, 27, 2, 0, 1}, /* RX_ER */
-	{1, 24, 2, 0, 1}, /* COL */
-	{1, 25, 2, 0, 1}, /* CRS */
-	{2,  6, 2, 0, 1}, /* TX_CLK - CLK7 */
-	{2,  7, 2, 0, 1}, /* RX_CLK - CLK8 */
-
-	/* PCI1 */
-	{5,  4, 2, 0, 3}, /* PCI_M66EN */
-	{5,  5, 1, 0, 3}, /* PCI_INTA */
-	{5,  6, 1, 0, 3}, /* PCI_RSTO */
-	{5,  7, 3, 0, 3}, /* PCI_C_BE0 */
-	{5,  8, 3, 0, 3}, /* PCI_C_BE1 */
-	{5,  9, 3, 0, 3}, /* PCI_C_BE2 */
-	{5, 10, 3, 0, 3}, /* PCI_C_BE3 */
-	{5, 11, 3, 0, 3}, /* PCI_PAR */
-	{5, 12, 3, 0, 3}, /* PCI_FRAME */
-	{5, 13, 3, 0, 3}, /* PCI_TRDY */
-	{5, 14, 3, 0, 3}, /* PCI_IRDY */
-	{5, 15, 3, 0, 3}, /* PCI_STOP */
-	{5, 16, 3, 0, 3}, /* PCI_DEVSEL */
-	{5, 17, 0, 0, 0}, /* PCI_IDSEL */
-	{5, 18, 3, 0, 3}, /* PCI_SERR */
-	{5, 19, 3, 0, 3}, /* PCI_PERR */
-	{5, 20, 3, 0, 3}, /* PCI_REQ0 */
-	{5, 21, 2, 0, 3}, /* PCI_REQ1 */
-	{5, 22, 2, 0, 3}, /* PCI_GNT2 */
-	{5, 23, 3, 0, 3}, /* PCI_GNT0 */
-	{5, 24, 1, 0, 3}, /* PCI_GNT1 */
-	{5, 25, 1, 0, 3}, /* PCI_GNT2 */
-	{5, 26, 0, 0, 0}, /* PCI_CLK0 */
-	{5, 27, 0, 0, 0}, /* PCI_CLK1 */
-	{5, 28, 0, 0, 0}, /* PCI_CLK2 */
-	{5, 29, 0, 0, 3}, /* PCI_SYNC_OUT */
-	{6,  0, 3, 0, 3}, /* PCI_AD0 */
-	{6,  1, 3, 0, 3}, /* PCI_AD1 */
-	{6,  2, 3, 0, 3}, /* PCI_AD2 */
-	{6,  3, 3, 0, 3}, /* PCI_AD3 */
-	{6,  4, 3, 0, 3}, /* PCI_AD4 */
-	{6,  5, 3, 0, 3}, /* PCI_AD5 */
-	{6,  6, 3, 0, 3}, /* PCI_AD6 */
-	{6,  7, 3, 0, 3}, /* PCI_AD7 */
-	{6,  8, 3, 0, 3}, /* PCI_AD8 */
-	{6,  9, 3, 0, 3}, /* PCI_AD9 */
-	{6, 10, 3, 0, 3}, /* PCI_AD10 */
-	{6, 11, 3, 0, 3}, /* PCI_AD11 */
-	{6, 12, 3, 0, 3}, /* PCI_AD12 */
-	{6, 13, 3, 0, 3}, /* PCI_AD13 */
-	{6, 14, 3, 0, 3}, /* PCI_AD14 */
-	{6, 15, 3, 0, 3}, /* PCI_AD15 */
-	{6, 16, 3, 0, 3}, /* PCI_AD16 */
-	{6, 17, 3, 0, 3}, /* PCI_AD17 */
-	{6, 18, 3, 0, 3}, /* PCI_AD18 */
-	{6, 19, 3, 0, 3}, /* PCI_AD19 */
-	{6, 20, 3, 0, 3}, /* PCI_AD20 */
-	{6, 21, 3, 0, 3}, /* PCI_AD21 */
-	{6, 22, 3, 0, 3}, /* PCI_AD22 */
-	{6, 23, 3, 0, 3}, /* PCI_AD23 */
-	{6, 24, 3, 0, 3}, /* PCI_AD24 */
-	{6, 25, 3, 0, 3}, /* PCI_AD25 */
-	{6, 26, 3, 0, 3}, /* PCI_AD26 */
-	{6, 27, 3, 0, 3}, /* PCI_AD27 */
-	{6, 28, 3, 0, 3}, /* PCI_AD28 */
-	{6, 29, 3, 0, 3}, /* PCI_AD29 */
-	{6, 30, 3, 0, 3}, /* PCI_AD30 */
-	{6, 31, 3, 0, 3}, /* PCI_AD31 */
-
-	/* NAND */
-	{4, 18, 2, 0, 0}, /* NAND_RYnBY */
-
-	/* DUART - UART2 */
-	{5,  0, 1, 0, 2}, /* UART2_SOUT */
-	{5,  2, 1, 0, 1}, /* UART2_RTS */
-	{5,  3, 2, 0, 2}, /* UART2_SIN */
-	{5,  1, 2, 0, 3}, /* UART2_CTS */
-
-	/* UCC5 - UART3 */
-	{3,  0, 1, 0, 1}, /* UART3_TX */
-	{3,  4, 1, 0, 1}, /* UART3_RTS */
-	{3,  6, 2, 0, 1}, /* UART3_RX */
-	{3, 12, 2, 0, 0}, /* UART3_CTS */
-	{3, 13, 2, 0, 0}, /* UCC5_CD */
-
-	/* UCC6 - UART4 */
-	{3, 14, 1, 0, 1}, /* UART4_TX */
-	{3, 18, 1, 0, 1}, /* UART4_RTS */
-	{3, 20, 2, 0, 1}, /* UART4_RX */
-	{3, 26, 2, 0, 0}, /* UART4_CTS */
-	{3, 27, 2, 0, 0}, /* UCC6_CD */
-
-	/* Fujitsu MB86277 (MINT) graphics controller */
-	{0, 30, 1, 0, 0}, /* nSRESET_GRAPHICS */
-	{1,  5, 1, 0, 0}, /* nXRST_GRAPHICS */
-	{1,  7, 1, 0, 0}, /* LVDS_BKLT_CTR */
-	{2, 16, 1, 0, 0}, /* LVDS_BKLT_EN */
-
-	/* AD7843 ADC/Touchscreen controller */
-	{4, 14, 1, 0, 0}, /* SPI_nCS0 */
-	{4, 28, 3, 0, 3}, /* SPI_MOSI */
-	{4, 29, 3, 0, 3}, /* SPI_MISO */
-	{4, 30, 3, 0, 3}, /* SPI_CLK */
-
-	/* Freescale QUICC Engine USB Host Controller (FHCI) */
-	{1,  2, 1, 0, 3}, /* USBOE */
-	{1,  3, 1, 0, 3}, /* USBTP */
-	{1,  8, 1, 0, 1}, /* USBTN */
-	{1,  9, 2, 1, 3}, /* USBRP */
-	{1, 10, 2, 0, 3}, /* USBRXD */
-	{1, 11, 2, 1, 3}, /* USBRN */
-	{2, 20, 2, 0, 1}, /* CLK21 */
-	{4, 20, 1, 0, 0}, /* SPEED */
-	{4, 21, 1, 0, 0}, /* SUSPND */
-
-	/* END of table */
-	{0,  0, 0, 0, QE_IOP_TAB_END},
-};
-
-int board_early_init_r(void)
-{
-	void *reg = (void *)(CONFIG_SYS_IMMR + 0x14a8);
-	u32 val;
-
-	/*
-	 * Because of errata in the UCCs, we have to write to the reserved
-	 * registers to slow the clocks down.
-	 */
-	val = in_be32(reg);
-	/* UCC1 */
-	val |= 0x00003000;
-	/* UCC2 */
-	val |= 0x0c000000;
-	out_be32(reg, val);
-
-	return 0;
-}
-
-int fixed_sdram(void)
-{
-	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
-	u32 msize = 0;
-	u32 ddr_size;
-	u32 ddr_size_log2;
-
-	msize = CONFIG_SYS_DDR_SIZE;
-	for (ddr_size = msize << 20, ddr_size_log2 = 0;
-	     (ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) {
-		if (ddr_size & 1)
-			return -1;
-	}
-
-	im->sysconf.ddrlaw[0].ar =
-	    LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
-
-	im->ddr.csbnds[0].csbnds = CONFIG_SYS_DDR_CS0_BNDS;
-	im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG;
-	im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
-	im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
-	im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
-	im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
-	im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG;
-	im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2;
-	im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
-	im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2;
-	im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
-	im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CNTL;
-	udelay(200);
-	im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
-
-	return msize;
-}
-
-phys_size_t initdram(int board_type)
-{
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-	extern void ddr_enable_ecc(unsigned int dram_size);
-#endif
-	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
-	u32 msize = 0;
-
-	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
-		return -1;
-
-	/* DDR SDRAM - Main SODIMM */
-	im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR;
-	msize = fixed_sdram();
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-	/*
-	 * Initialize DDR ECC byte
-	 */
-	ddr_enable_ecc(msize * 1024 * 1024);
-#endif
-
-	/* return total bus SDRAM size(bytes)  -- DDR */
-	return (msize * 1024 * 1024);
-}
-
-int checkboard(void)
-{
-	puts("Board: Freescale/Logic MPC8360ERDK\n");
-	return 0;
-}
-
-static struct pci_region pci_regions[] = {
-	{
-		.bus_start = CONFIG_SYS_PCI1_MEM_BASE,
-		.phys_start = CONFIG_SYS_PCI1_MEM_PHYS,
-		.size = CONFIG_SYS_PCI1_MEM_SIZE,
-		.flags = PCI_REGION_MEM | PCI_REGION_PREFETCH,
-	},
-	{
-		.bus_start = CONFIG_SYS_PCI1_MMIO_BASE,
-		.phys_start = CONFIG_SYS_PCI1_MMIO_PHYS,
-		.size = CONFIG_SYS_PCI1_MMIO_SIZE,
-		.flags = PCI_REGION_MEM,
-	},
-	{
-		.bus_start = CONFIG_SYS_PCI1_IO_BASE,
-		.phys_start = CONFIG_SYS_PCI1_IO_PHYS,
-		.size = CONFIG_SYS_PCI1_IO_SIZE,
-		.flags = PCI_REGION_IO,
-	},
-};
-
-void pci_init_board(void)
-{
-	volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
-	volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk;
-	volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
-	struct pci_region *reg[] = { pci_regions, };
-
-#if defined(CONFIG_PCI_33M)
-	clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2 |
-		    OCCR_PCICD0 | OCCR_PCICD1 | OCCR_PCICD2 | OCCR_PCICR;
-	printf("PCI clock is 33MHz\n");
-#else
-	clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2;
-	printf("PCI clock is 66MHz\n");
-#endif
-
-	udelay(2000);
-
-	/* Configure PCI Local Access Windows */
-	pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR;
-	pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB;
-
-	pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR;
-	pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB;
-
-	mpc83xx_pci_init(1, reg);
-}
-
-#if defined(CONFIG_OF_BOARD_SETUP)
-int ft_board_setup(void *blob, bd_t *bd)
-{
-	ft_cpu_setup(blob, bd);
-	ft_pci_setup(blob, bd);
-
-	return 0;
-}
-#endif
diff --git a/board/freescale/mpc8360erdk/nand.c b/board/freescale/mpc8360erdk/nand.c
deleted file mode 100644
index 237c0c42e0..0000000000
--- a/board/freescale/mpc8360erdk/nand.c
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * MPC8360E-RDK support for the NAND on FSL UPM
- *
- * Copyright (C) 2007 MontaVista Software, Inc.
- *                    Anton Vorontsov <avorontsov@ru.mvista.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <config.h>
-#include <common.h>
-#include <asm/io.h>
-#include <asm/immap_83xx.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/fsl_upm.h>
-#include <nand.h>
-
-static struct immap *im = (struct immap *)CONFIG_SYS_IMMR;
-
-static const u32 upm_array[] = {
-	0x0ff03c30, 0x0ff03c30, 0x0ff03c34, 0x0ff33c30, /* Words  0 to  3 */
-	0xfff33c31, 0xfffffc30, 0xfffffc30, 0xfffffc30, /* Words  4 to  7 */
-	0x0faf3c30, 0x0faf3c30, 0x0faf3c30, 0x0fff3c34, /* Words  8 to 11 */
-	0xffff3c31, 0xfffffc30, 0xfffffc30, 0xfffffc30, /* Words 12 to 15 */
-	0x0fa3fc30, 0x0fa3fc30, 0x0fa3fc30, 0x0ff3fc34, /* Words 16 to 19 */
-	0xfff3fc31, 0xfffffc30, 0xfffffc30, 0xfffffc30, /* Words 20 to 23 */
-	0x0ff33c30, 0x0fa33c30, 0x0fa33c34, 0x0ff33c30, /* Words 24 to 27 */
-	0xfff33c31, 0xfff0fc30, 0xfff0fc30, 0xfff0fc30, /* Words 28 to 31 */
-	0xfff3fc30, 0xfff3fc30, 0xfff6fc30, 0xfffcfc30, /* Words 32 to 35 */
-	0xfffcfc30, 0xfffcfc30, 0xfffcfc30, 0xfffcfc30, /* Words 36 to 39 */
-	0xfffcfc30, 0xfffcfc30, 0xfffcfc30, 0xfffcfc30, /* Words 40 to 43 */
-	0xfffdfc30, 0xfffffc30, 0xfffffc30, 0xfffffc31, /* Words 44 to 47 */
-	0xfffffc30, 0xfffffc00, 0xfffffc00, 0xfffffc00, /* Words 48 to 51 */
-	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, /* Words 52 to 55 */
-	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, /* Words 56 to 59 */
-	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, /* Words 60 to 63 */
-};
-
-static void upm_setup(struct fsl_upm *upm)
-{
-	int i;
-
-	/* write upm array */
-	out_be32(upm->mxmr, MxMR_OP_WARR);
-
-	for (i = 0; i < 64; i++) {
-		out_be32(upm->mdr, upm_array[i]);
-		out_8(upm->io_addr, 0x0);
-	}
-
-	/* normal operation */
-	out_be32(upm->mxmr, MxMR_OP_NORM);
-	while (in_be32(upm->mxmr) != MxMR_OP_NORM)
-		eieio();
-}
-
-static int dev_ready(int chip_nr)
-{
-	if (in_be32(&im->qepio.ioport[4].pdat) & 0x00002000) {
-		debug("nand ready\n");
-		return 1;
-	}
-
-	debug("nand busy\n");
-	return 0;
-}
-
-static struct fsl_upm_nand fun = {
-	.upm = {
-		.io_addr = (void *)CONFIG_SYS_NAND_BASE,
-	},
-	.width = 8,
-	.upm_cmd_offset = 8,
-	.upm_addr_offset = 16,
-	.dev_ready = dev_ready,
-	.wait_flags = FSL_UPM_WAIT_RUN_PATTERN,
-	.chip_delay = 50,
-};
-
-int board_nand_init(struct nand_chip *nand)
-{
-	fun.upm.mxmr = &im->im_lbc.mamr;
-	fun.upm.mdr = &im->im_lbc.mdr;
-	fun.upm.mar = &im->im_lbc.mar;
-
-	upm_setup(&fun.upm);
-
-	return fsl_upm_nand_init(nand, &fun);
-}
diff --git a/board/freescale/mpc837xerdb/MAINTAINERS b/board/freescale/mpc837xerdb/MAINTAINERS
index 8592a2c3c1..81b4eed5ed 100644
--- a/board/freescale/mpc837xerdb/MAINTAINERS
+++ b/board/freescale/mpc837xerdb/MAINTAINERS
@@ -1,6 +1,6 @@
 MPC837XERDB BOARD
-#M:	Joe D'Abbraccio <ljd015@freescale.com>
-S:	Orphan (since 2014-06)
+M:	Sinan Akman <sinan@writeme.com>
+S:	Maintained
 F:	board/freescale/mpc837xerdb/
 F:	include/configs/MPC837XERDB.h
 F:	configs/MPC837XERDB_defconfig
diff --git a/board/freescale/p1_p2_rdb/Kconfig b/board/freescale/p1_p2_rdb/Kconfig
deleted file mode 100644
index d7ad35d403..0000000000
--- a/board/freescale/p1_p2_rdb/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_P1_P2_RDB
-
-config SYS_BOARD
-	default "p1_p2_rdb"
-
-config SYS_VENDOR
-	default "freescale"
-
-config SYS_CONFIG_NAME
-	default "P1_P2_RDB"
-
-endif
diff --git a/board/freescale/p1_p2_rdb/MAINTAINERS b/board/freescale/p1_p2_rdb/MAINTAINERS
deleted file mode 100644
index aabf587dd6..0000000000
--- a/board/freescale/p1_p2_rdb/MAINTAINERS
+++ /dev/null
@@ -1,37 +0,0 @@
-P1_P2_RDB BOARD
-#M:	-
-S:	Maintained
-F:	board/freescale/p1_p2_rdb/
-F:	include/configs/P1_P2_RDB.h
-F:	configs/P1011RDB_defconfig
-F:	configs/P1011RDB_36BIT_defconfig
-F:	configs/P1011RDB_36BIT_SDCARD_defconfig
-F:	configs/P1011RDB_36BIT_SPIFLASH_defconfig
-F:	configs/P1011RDB_NAND_defconfig
-F:	configs/P1011RDB_SDCARD_defconfig
-F:	configs/P1011RDB_SPIFLASH_defconfig
-F:	configs/P1020RDB_defconfig
-F:	configs/P1020RDB_36BIT_defconfig
-F:	configs/P1020RDB_36BIT_SDCARD_defconfig
-F:	configs/P1020RDB_36BIT_SPIFLASH_defconfig
-F:	configs/P1020RDB_NAND_defconfig
-F:	configs/P1020RDB_SDCARD_defconfig
-F:	configs/P1020RDB_SPIFLASH_defconfig
-F:	configs/P2010RDB_defconfig
-F:	configs/P2010RDB_36BIT_defconfig
-F:	configs/P2010RDB_36BIT_SDCARD_defconfig
-F:	configs/P2010RDB_36BIT_SPIFLASH_defconfig
-F:	configs/P2010RDB_NAND_defconfig
-F:	configs/P2010RDB_SDCARD_defconfig
-F:	configs/P2010RDB_SPIFLASH_defconfig
-F:	configs/P2020RDB_36BIT_defconfig
-F:	configs/P2020RDB_36BIT_SDCARD_defconfig
-F:	configs/P2020RDB_36BIT_SPIFLASH_defconfig
-F:	configs/P2020RDB_NAND_defconfig
-F:	configs/P2020RDB_SDCARD_defconfig
-F:	configs/P2020RDB_SPIFLASH_defconfig
-
-P2020RDB BOARD
-M:	Poonam Aggrwal <poonam.aggrwal@freescale.com>
-S:	Maintained
-F:	configs/P2020RDB_defconfig
diff --git a/board/freescale/p1_p2_rdb/Makefile b/board/freescale/p1_p2_rdb/Makefile
deleted file mode 100644
index a97bf45f00..0000000000
--- a/board/freescale/p1_p2_rdb/Makefile
+++ /dev/null
@@ -1,30 +0,0 @@
-#
-# Copyright 2009 Freescale Semiconductor, Inc.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-MINIMAL=
-
-ifdef CONFIG_SPL_BUILD
-ifdef CONFIG_SPL_INIT_MINIMAL
-MINIMAL=y
-endif
-endif
-
-ifdef MINIMAL
-
-obj-y	+= spl_minimal.o tlb.o law.o
-
-else
-ifdef CONFIG_SPL_BUILD
-obj-y += spl.o
-else
-obj-y	+= p1_p2_rdb.o
-obj-$(CONFIG_PCI)  += pci.o
-endif
-obj-y	+= ddr.o
-obj-y	+= law.o
-obj-y	+= tlb.o
-
-endif
diff --git a/board/freescale/p1_p2_rdb/README b/board/freescale/p1_p2_rdb/README
deleted file mode 100644
index cd66e5878d..0000000000
--- a/board/freescale/p1_p2_rdb/README
+++ /dev/null
@@ -1,145 +0,0 @@
-Overview
---------
-P2020RDB is a Low End Dual core platform supporting the P2020 processor
-of QorIQ series. P2020 is an e500 based dual core SOC.
-
-Building U-boot
------------
-To build the u-boot for P2020RDB:
-	make P2020RDB_config
-	make
-
-NOR Flash Banks
------------
-RDB board for P2020 has two flash banks. They are both present on boot.
-
-Booting by default is always from the boot bank at 0xef00_0000.
-
-Memory Map
-----------
-0xef00_0000 - 0xef7f_ffff	Alternate bank		8MB
-0xe800_0000 - 0xefff_ffff	Boot bank		8MB
-
-0xef74_0000 - 0xef7f_ffff	Alternate u-boot address	768KB
-0xeff4_0000 - 0xefff_ffff	Boot u-boot address		768KB
-
-Switch settings to boot from the NOR flash banks
-------------------------------------------------
-SW4[8]=0 default NOR Flash bank
-SW4[8]=1 Alternate NOR Flash bank
-
-Flashing Images
----------------
-To place a new u-boot image in the alternate flash bank and then boot
-with that new image temporarily, use this:
-	tftp 1000000 u-boot.bin
-	erase ef740000 ef7fffff
-	cp.b 1000000 ef740000 c0000
-
-Now to boot from the alternate bank change the SW4[8] from 0 to 1.
-
-To program the image in the boot flash bank:
-	tftp 1000000 u-boot.bin
-	protect off all
-	erase eff40000 ffffffff
-	cp.b 1000000 eff40000 c0000
-
-Using the Device Tree Source File
----------------------------------
-To create the DTB (Device Tree Binary) image file,
-use a command similar to this:
-
-	dtc -b 0 -f -I dts -O dtb p2020rdb.dts > p2020rdb.dtb
-
-Likely, that .dts file will come from here;
-
-	linux-2.6/arch/powerpc/boot/dts/p2020rdb.dts
-
-Booting Linux
--------------
-Place a linux uImage in the TFTP disk area.
-
-	tftp 1000000 uImage.p2020rdb
-	tftp 2000000 rootfs.ext2.gz.uboot
-	tftp c00000 p2020rdb.dtb
-	bootm 1000000 2000000 c00000
-
-Implementing AMP(Asymmetric MultiProcessing)
----------------------------------------------
-1. Build kernel image for core0:
-
-	a. $ make 85xx/p1_p2_rdb_defconfig
-
-	b. $ make menuconfig
-	   - un-select "Processor support"->
-		"Symetric multi-processing support"
-
-	c. $ make uImage
-
-	d. $ cp arch/powerpc/boot/uImage /tftpboot/uImage.core0
-
-2. Build kernel image for core1:
-
-	a. $ make 85xx/p1_p2_rdb_defconfig
-
-	b. $ make menuconfig
-	   - Un-select "Processor support"->
-		"Symetric multi-processing support"
-	   - Select "Advanced setup" ->
-		"Prompt for advanced kernel configuration options"
-		- Select
-			"Set physical address where the kernel is loaded"
-			and set it to 0x20000000, assuming core1 will
-			start from 512MB.
-		- Select "Set custom page offset address"
-		- Select "Set custom kernel base address"
-		- Select "Set maximum low memory"
-	   - "Exit" and save the selection.
-
-	c. $ make uImage
-
-	d. $ cp arch/powerpc/boot/uImage /tftpboot/uImage.core1
-
-3. Create dtb for core0:
-
-	$ dtc -I dts -O dtb -f -b 0
-		 arch/powerpc/boot/dts/p2020rdb_camp_core0.dts >
-		 /tftpboot/p2020rdb_camp_core0.dtb
-
-4. Create dtb for core1:
-
-	$ dtc -I dts -O dtb -f -b 1
-		 arch/powerpc/boot/dts/p2020rdb_camp_core1.dts >
-		 /tftpboot/p2020rdb_camp_core1.dtb
-
-5. Bring up two cores separately:
-
-	a. Power on the board, under u-boot prompt:
-		=> setenv <serverip>
-		=> setenv <ipaddr>
-		=> setenv bootargs root=/dev/ram rw console=ttyS0,115200
-	b. Bring up core1's kernel first:
-		=> setenv bootm_low 0x20000000
-		=> setenv bootm_size 0x10000000
-		=> tftp 21000000 uImage.core1
-		=> tftp 22000000 ramdiskfile
-		=> tftp 20c00000 p2020rdb_camp_core1.dtb
-		=> interrupts off
-		=> bootm start 21000000 22000000 20c00000
-		=> bootm loados
-		=> bootm ramdisk
-		=> bootm fdt
-		=> fdt boardsetup
-		=> fdt chosen $initrd_start $initrd_end
-		=> bootm prep
-		=> cpu 1 release $bootm_low - $fdtaddr -
-	c. Bring up core0's kernel(on the same u-boot console):
-		=> setenv bootm_low 0
-		=> setenv bootm_size 0x20000000
-		=> tftp 1000000 uImage.core0
-		=> tftp 2000000 ramdiskfile
-		=> tftp c00000 p2020rdb_camp_core0.dtb
-		=> bootm 1000000 2000000 c00000
-
-Please note only core0 will run u-boot, core1 starts kernel directly
-after "cpu release" command is issued.
diff --git a/board/freescale/p1_p2_rdb/ddr.c b/board/freescale/p1_p2_rdb/ddr.c
deleted file mode 100644
index 98ee5f1021..0000000000
--- a/board/freescale/p1_p2_rdb/ddr.c
+++ /dev/null
@@ -1,221 +0,0 @@
-/*
- * Copyright 2009, 2011 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/mmu.h>
-#include <asm/immap_85xx.h>
-#include <asm/processor.h>
-#include <fsl_ddr_sdram.h>
-#include <asm/io.h>
-#include <asm/fsl_law.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define CONFIG_SYS_DDR_CS0_BNDS		0x0000003F
-#define CONFIG_SYS_DDR_CS0_CONFIG	0x80014202
-#define CONFIG_SYS_DDR_CS0_CONFIG_2	0x00000000
-#define CONFIG_SYS_DDR_INIT_ADDR	0x00000000
-#define CONFIG_SYS_DDR_INIT_EXT_ADDR	0x00000000
-#define CONFIG_SYS_DDR_MODE_CONTROL	0x00000000
-#define CONFIG_SYS_DDR_ZQ_CONTROL	0x00000000
-#define CONFIG_SYS_DDR_WRLVL_CONTROL	0x00000000
-#define CONFIG_SYS_DDR_SR_CNTR		0x00000000
-#define CONFIG_SYS_DDR_RCW_1		0x00000000
-#define CONFIG_SYS_DDR_RCW_2		0x00000000
-#define CONFIG_SYS_DDR_CONTROL		0x43000000	/* Type = DDR2*/
-#define CONFIG_SYS_DDR_CONTROL_2	0x24401000
-#define CONFIG_SYS_DDR_TIMING_4		0x00000000
-#define CONFIG_SYS_DDR_TIMING_5		0x00000000
-
-#define CONFIG_SYS_DDR_TIMING_3_400	0x00010000
-#define CONFIG_SYS_DDR_TIMING_0_400	0x00260802
-#define CONFIG_SYS_DDR_TIMING_1_400	0x39355322
-#define CONFIG_SYS_DDR_TIMING_2_400	0x1f9048ca
-#define CONFIG_SYS_DDR_CLK_CTRL_400	0x02800000
-#define CONFIG_SYS_DDR_MODE_1_400	0x00480432
-#define CONFIG_SYS_DDR_MODE_2_400	0x00000000
-#define CONFIG_SYS_DDR_INTERVAL_400	0x06180100
-
-#define CONFIG_SYS_DDR_TIMING_3_533	0x00020000
-#define CONFIG_SYS_DDR_TIMING_0_533	0x00260802
-#define CONFIG_SYS_DDR_TIMING_1_533	0x4c47c432
-#define CONFIG_SYS_DDR_TIMING_2_533	0x0f9848ce
-#define CONFIG_SYS_DDR_CLK_CTRL_533	0x02800000
-#define CONFIG_SYS_DDR_MODE_1_533	0x00040642
-#define CONFIG_SYS_DDR_MODE_2_533	0x00000000
-#define CONFIG_SYS_DDR_INTERVAL_533	0x08200100
-
-#define CONFIG_SYS_DDR_TIMING_3_667	0x00030000
-#define CONFIG_SYS_DDR_TIMING_0_667	0x55770802
-#define CONFIG_SYS_DDR_TIMING_1_667	0x5f599543
-#define CONFIG_SYS_DDR_TIMING_2_667	0x0fa074d1
-#define CONFIG_SYS_DDR_CLK_CTRL_667	0x03000000
-#define CONFIG_SYS_DDR_MODE_1_667	0x00040852
-#define CONFIG_SYS_DDR_MODE_2_667	0x00000000
-#define CONFIG_SYS_DDR_INTERVAL_667	0x0a280100
-
-#define CONFIG_SYS_DDR_TIMING_3_800	0x00040000
-#define CONFIG_SYS_DDR_TIMING_0_800	0x00770802
-#define CONFIG_SYS_DDR_TIMING_1_800	0x6f6b6543
-#define CONFIG_SYS_DDR_TIMING_2_800	0x0fa074d1
-#define CONFIG_SYS_DDR_CLK_CTRL_800	0x02800000
-#define CONFIG_SYS_DDR_MODE_1_800	0x00040852
-#define CONFIG_SYS_DDR_MODE_2_800	0x00000000
-#define CONFIG_SYS_DDR_INTERVAL_800	0x0c300100
-
-fsl_ddr_cfg_regs_t ddr_cfg_regs_400 = {
-	.cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
-	.cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
-	.cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
-	.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_400,
-	.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_400,
-	.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_400,
-	.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_400,
-	.ddr_sdram_cfg = CONFIG_SYS_DDR_CONTROL,
-	.ddr_sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL_2,
-	.ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_400,
-	.ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_400,
-	.ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
-	.ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_400,
-	.ddr_data_init = CONFIG_MEM_INIT_VALUE,
-	.ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_400,
-	.ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
-	.ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
-	.timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
-	.timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
-	.ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CONTROL,
-	.ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CONTROL,
-	.ddr_sr_cntr = CONFIG_SYS_DDR_SR_CNTR,
-	.ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
-	.ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
-};
-
-fsl_ddr_cfg_regs_t ddr_cfg_regs_533 = {
-	.cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
-	.cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
-	.cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
-	.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_533,
-	.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_533,
-	.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_533,
-	.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_533,
-	.ddr_sdram_cfg = CONFIG_SYS_DDR_CONTROL,
-	.ddr_sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL_2,
-	.ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_533,
-	.ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_533,
-	.ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
-	.ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_533,
-	.ddr_data_init = CONFIG_MEM_INIT_VALUE,
-	.ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_533,
-	.ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
-	.ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
-	.timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
-	.timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
-	.ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CONTROL,
-	.ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CONTROL,
-	.ddr_sr_cntr = CONFIG_SYS_DDR_SR_CNTR,
-	.ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
-	.ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
-};
-
-fsl_ddr_cfg_regs_t ddr_cfg_regs_667 = {
-	.cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
-	.cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
-	.cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
-	.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_667,
-	.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_667,
-	.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_667,
-	.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_667,
-	.ddr_sdram_cfg = CONFIG_SYS_DDR_CONTROL,
-	.ddr_sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL_2,
-	.ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_667,
-	.ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_667,
-	.ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
-	.ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_667,
-	.ddr_data_init = CONFIG_MEM_INIT_VALUE,
-	.ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_667,
-	.ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
-	.ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
-	.timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
-	.timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
-	.ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CONTROL,
-	.ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CONTROL,
-	.ddr_sr_cntr = CONFIG_SYS_DDR_SR_CNTR,
-	.ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
-	.ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
-};
-
-fsl_ddr_cfg_regs_t ddr_cfg_regs_800 = {
-	.cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
-	.cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
-	.cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
-	.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_800,
-	.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_800,
-	.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_800,
-	.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_800,
-	.ddr_sdram_cfg = CONFIG_SYS_DDR_CONTROL,
-	.ddr_sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL_2,
-	.ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_800,
-	.ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_800,
-	.ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
-	.ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_800,
-	.ddr_data_init = CONFIG_MEM_INIT_VALUE,
-	.ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_800,
-	.ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
-	.ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
-	.timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
-	.timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
-	.ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CONTROL,
-	.ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CONTROL,
-	.ddr_sr_cntr = CONFIG_SYS_DDR_SR_CNTR,
-	.ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
-	.ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
-};
-
-/*
- * Fixed sdram init -- doesn't use serial presence detect.
- */
-
-phys_size_t fixed_sdram (void)
-{
-	fsl_ddr_cfg_regs_t ddr_cfg_regs;
-	size_t ddr_size;
-	struct cpu_type *cpu;
-	ulong ddr_freq, ddr_freq_mhz;
-
-	cpu = gd->arch.cpu;
-
-	ddr_size = CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
-
-#if defined(CONFIG_SYS_RAMBOOT)
-	return ddr_size;
-#endif
-	ddr_freq = get_ddr_freq(0);
-	ddr_freq_mhz = ddr_freq / 1000000;
-
-	printf("Configuring DDR for %ld T/s data rate\n", ddr_freq);
-
-	if(ddr_freq_mhz <= 400)
-		memcpy(&ddr_cfg_regs, &ddr_cfg_regs_400, sizeof(ddr_cfg_regs));
-	else if(ddr_freq_mhz <= 533)
-		memcpy(&ddr_cfg_regs, &ddr_cfg_regs_533, sizeof(ddr_cfg_regs));
-	else if(ddr_freq_mhz <= 667)
-		memcpy(&ddr_cfg_regs, &ddr_cfg_regs_667, sizeof(ddr_cfg_regs));
-	else if(ddr_freq_mhz <= 800)
-		memcpy(&ddr_cfg_regs, &ddr_cfg_regs_800, sizeof(ddr_cfg_regs));
-	else
-		panic("Unsupported DDR data rate %ld T/s\n", ddr_freq);
-
-	/* P1020 and it's derivatives support max 32bit DDR width */
-	if (cpu->soc_ver == SVR_P1020 || cpu->soc_ver == SVR_P1011) {
-		ddr_cfg_regs.ddr_sdram_cfg |= SDRAM_CFG_32_BE;
-		ddr_cfg_regs.cs[0].bnds = 0x0000001F;
-	}
-
-	fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0, 0);
-
-	set_ddr_laws(0, ddr_size, LAW_TRGT_IF_DDR_1);
-	return ddr_size;
-}
diff --git a/board/freescale/p1_p2_rdb/law.c b/board/freescale/p1_p2_rdb/law.c
deleted file mode 100644
index b60a27fd92..0000000000
--- a/board/freescale/p1_p2_rdb/law.c
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Copyright 2009-2010 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/fsl_law.h>
-#include <asm/mmu.h>
-
-struct law_entry law_table[] = {
-	SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_LBC),
-	SET_LAW(CONFIG_SYS_VSC7385_BASE_PHYS, LAW_SIZE_128K, LAW_TRGT_IF_LBC),
-	SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC),
-};
-
-int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/p1_p2_rdb/p1_p2_rdb.c b/board/freescale/p1_p2_rdb/p1_p2_rdb.c
deleted file mode 100644
index 61ed466fa7..0000000000
--- a/board/freescale/p1_p2_rdb/p1_p2_rdb.c
+++ /dev/null
@@ -1,303 +0,0 @@
-/*
- * Copyright 2009-2011 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-#include <asm/cache.h>
-#include <asm/immap_85xx.h>
-#include <asm/fsl_serdes.h>
-#include <asm/io.h>
-#include <miiphy.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-#include <fsl_mdio.h>
-#include <tsec.h>
-#include <vsc7385.h>
-#include <netdev.h>
-#include <rtc.h>
-#include <i2c.h>
-#include <hwconfig.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define VSC7385_RST_SET		0x00080000
-#define SLIC_RST_SET		0x00040000
-#define SGMII_PHY_RST_SET	0x00020000
-#define PCIE_RST_SET		0x00010000
-#define RGMII_PHY_RST_SET	0x02000000
-
-#define USB_RST_CLR		0x04000000
-#define USB2_PORT_OUT_EN        0x01000000
-
-#define GPIO_DIR		0x060f0000
-
-#define BOARD_PERI_RST_SET	VSC7385_RST_SET | SLIC_RST_SET | \
-				SGMII_PHY_RST_SET | PCIE_RST_SET | \
-				RGMII_PHY_RST_SET
-
-#define SYSCLK_MASK	0x00200000
-#define BOARDREV_MASK	0x10100000
-#define BOARDREV_C	0x00100000
-#define BOARDREV_D	0x00000000
-
-#define SYSCLK_66	66666666
-#define SYSCLK_100	100000000
-
-unsigned long get_board_sys_clk(ulong dummy)
-{
-	volatile ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
-	u32 val_gpdat, sysclk_gpio;
-
-	val_gpdat = in_be32(&pgpio->gpdat);
-	sysclk_gpio = val_gpdat & SYSCLK_MASK;
-
-	if(sysclk_gpio == 0)
-		return SYSCLK_66;
-	else
-		return SYSCLK_100;
-
-	return 0;
-}
-
-#ifdef CONFIG_MMC
-int board_early_init_f (void)
-{
-	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-
-	setbits_be32(&gur->pmuxcr,
-			(MPC85xx_PMUXCR_SDHC_CD |
-			 MPC85xx_PMUXCR_SDHC_WP));
-	return 0;
-}
-#endif
-
-int checkboard (void)
-{
-	u32 val_gpdat, board_rev_gpio;
-	volatile ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
-	char board_rev = 0;
-	struct cpu_type *cpu;
-
-	val_gpdat = in_be32(&pgpio->gpdat);
-	board_rev_gpio = val_gpdat & BOARDREV_MASK;
-	if (board_rev_gpio == BOARDREV_C)
-		board_rev = 'C';
-	else if (board_rev_gpio == BOARDREV_D)
-		board_rev = 'D';
-	else
-		panic ("Unexpected Board REV %x detected!!\n", board_rev_gpio);
-
-	cpu = gd->arch.cpu;
-	printf ("Board: %sRDB Rev%c\n", cpu->name, board_rev);
-
-	setbits_be32(&pgpio->gpdir, GPIO_DIR);
-
-/*
- * Bringing the following peripherals out of reset via GPIOs
- * 0 = reset and 1 = out of reset
- * GPIO12 - Reset to Ethernet Switch
- * GPIO13 - Reset to SLIC/SLAC devices
- * GPIO14 - Reset to SGMII_PHY_N
- * GPIO15 - Reset to PCIe slots
- * GPIO6  - Reset to RGMII PHY
- * GPIO5  - Reset to USB3300 devices 1 = reset and 0 = out of reset
- */
-	clrsetbits_be32(&pgpio->gpdat, USB_RST_CLR, BOARD_PERI_RST_SET);
-
-	return 0;
-}
-
-int misc_init_r(void)
-{
-#if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH)
-	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
-	ccsr_gpio_t *gpio = (void *)CONFIG_SYS_MPC85xx_GPIO_ADDR;
-
-	setbits_be32(&gpio->gpdir, USB2_PORT_OUT_EN);
-	setbits_be32(&gpio->gpdat, USB2_PORT_OUT_EN);
-	setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_ELBC_OFF_USB2_ON);
-#endif
-	return 0;
-}
-
-int board_early_init_r(void)
-{
-	const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
-	int flash_esel = find_tlb_idx((void *)flashbase, 1);
-	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	unsigned int orig_bus = i2c_get_bus_num();
-	u8 i2c_data;
-
-	i2c_set_bus_num(1);
-	if (i2c_read(CONFIG_SYS_I2C_PCA9557_ADDR, 0,
-		1, &i2c_data, sizeof(i2c_data)) == 0) {
-		if (i2c_data & 0x2)
-			puts("NOR Flash Bank : Secondary\n");
-		else
-			puts("NOR Flash Bank : Primary\n");
-
-		if (i2c_data & 0x1) {
-			setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_SD_DATA);
-			puts("SD/MMC : 8-bit Mode\n");
-			puts("eSPI : Disabled\n");
-		} else {
-			puts("SD/MMC : 4-bit Mode\n");
-			puts("eSPI : Enabled\n");
-		}
-	} else {
-		puts("Failed reading I2C Chip 0x18 on bus 1\n");
-	}
-	i2c_set_bus_num(orig_bus);
-
-	/*
-	 * Remap Boot flash region to caching-inhibited
-	 * so that flash can be erased properly.
-	 */
-
-	/* Flush d-cache and invalidate i-cache of any FLASH data */
-	flush_dcache();
-	invalidate_icache();
-
-	if (flash_esel == -1) {
-		/* very unlikely unless something is messed up */
-		puts("Error: Could not find TLB for FLASH BASE\n");
-		flash_esel = 2;	/* give our best effort to continue */
-	} else {
-		/* invalidate existing TLB entry for flash */
-		disable_tlb(flash_esel);
-	}
-
-	set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
-			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, flash_esel, BOOKE_PAGESZ_16M, 1);
-	rtc_reset();
-	return 0;
-}
-
-
-#ifdef CONFIG_TSEC_ENET
-int board_eth_init(bd_t *bis)
-{
-	struct fsl_pq_mdio_info mdio_info;
-	struct tsec_info_struct tsec_info[4];
-	int num = 0;
-	char *tmp;
-	unsigned int vscfw_addr;
-
-#ifdef CONFIG_TSEC1
-	SET_STD_TSEC_INFO(tsec_info[num], 1);
-	num++;
-#endif
-#ifdef CONFIG_TSEC2
-	SET_STD_TSEC_INFO(tsec_info[num], 2);
-	num++;
-#endif
-#ifdef CONFIG_TSEC3
-	SET_STD_TSEC_INFO(tsec_info[num], 3);
-	if (is_serdes_configured(SGMII_TSEC3)) {
-		puts("eTSEC3 is in sgmii mode.\n");
-		tsec_info[num].flags |= TSEC_SGMII;
-	}
-	num++;
-#endif
-	if (!num) {
-		printf("No TSECs initialized\n");
-		return 0;
-	}
-#ifdef CONFIG_VSC7385_ENET
-/* If a VSC7385 microcode image is present, then upload it. */
-	if ((tmp = getenv ("vscfw_addr")) != NULL) {
-		vscfw_addr = simple_strtoul (tmp, NULL, 16);
-		printf("uploading VSC7385 microcode from %x\n", vscfw_addr);
-		if (vsc7385_upload_firmware((void *) vscfw_addr,
-					CONFIG_VSC7385_IMAGE_SIZE))
-			puts("Failure uploading VSC7385 microcode.\n");
-	} else
-		puts("No address specified for VSC7385 microcode.\n");
-#endif
-
-	mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
-	mdio_info.name = DEFAULT_MII_NAME;
-	fsl_pq_mdio_init(bis, &mdio_info);
-
-	tsec_eth_init(bis, tsec_info, num);
-
-	return pci_eth_init(bis);
-}
-#endif
-
-#if defined(CONFIG_OF_BOARD_SETUP)
-extern void ft_pci_board_setup(void *blob);
-
-int ft_board_setup(void *blob, bd_t *bd)
-{
-	const char *soc_usb_compat = "fsl-usb2-dr";
-	int err, usb1_off, usb2_off;
-	phys_addr_t base;
-	phys_size_t size;
-
-	ft_cpu_setup(blob, bd);
-
-	base = getenv_bootm_low();
-	size = getenv_bootm_size();
-
-#if defined(CONFIG_PCI)
-	ft_pci_board_setup(blob);
-#endif /* #if defined(CONFIG_PCI) */
-
-	fdt_fixup_memory(blob, (u64)base, (u64)size);
-
-#if defined(CONFIG_HAS_FSL_DR_USB)
-	fdt_fixup_dr_usb(blob, bd);
-#endif
-
-#if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH)
-	/* Delete eLBC node as it is muxed with USB2 controller */
-	if (hwconfig("usb2")) {
-		const char *soc_elbc_compat = "fsl,p1020-elbc";
-		int off = fdt_node_offset_by_compatible(blob, -1,
-			soc_elbc_compat);
-		if (off < 0) {
-			printf("WARNING: could not find compatible node %s\n",
-			       soc_elbc_compat);
-			return off;
-		}
-		err = fdt_del_node(blob, off);
-		if (err < 0) {
-			printf("WARNING: could not remove %s\n",
-			       soc_elbc_compat);
-			return err;
-		}
-		return 0;
-	}
-#endif
-	/* Delete USB2 node as it is muxed with eLBC */
-	usb1_off = fdt_node_offset_by_compatible(blob, -1,
-		soc_usb_compat);
-	if (usb1_off < 0) {
-		printf("WARNING: could not find compatible node %s\n",
-		       soc_usb_compat);
-		return usb1_off;
-	}
-	usb2_off = fdt_node_offset_by_compatible(blob, usb1_off,
-			soc_usb_compat);
-	if (usb2_off < 0) {
-		printf("WARNING: could not find compatible node %s\n",
-		       soc_usb_compat);
-		return usb2_off;
-	}
-	err = fdt_del_node(blob, usb2_off);
-	if (err < 0) {
-		printf("WARNING: could not remove %s\n", soc_usb_compat);
-		return err;
-	}
-
-	return 0;
-}
-
-#endif
diff --git a/board/freescale/p1_p2_rdb/pci.c b/board/freescale/p1_p2_rdb/pci.c
deleted file mode 100644
index 745ebb15e0..0000000000
--- a/board/freescale/p1_p2_rdb/pci.c
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Copyright 2009-2010 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <pci.h>
-#include <asm/immap_85xx.h>
-#include <asm/fsl_serdes.h>
-#include <asm/io.h>
-#include <asm/fsl_pci.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void pci_init_board(void)
-{
-	fsl_pcie_init_board(0);
-}
-
-void ft_pci_board_setup(void *blob)
-{
-	FT_FSL_PCI_SETUP;
-}
diff --git a/board/freescale/p1_p2_rdb/spl.c b/board/freescale/p1_p2_rdb/spl.c
deleted file mode 100644
index f30c5fe3e6..0000000000
--- a/board/freescale/p1_p2_rdb/spl.c
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <ns16550.h>
-#include <malloc.h>
-#include <mmc.h>
-#include <nand.h>
-#include <i2c.h>
-#include <fsl_esdhc.h>
-#include <spi_flash.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define SYSCLK_MASK	0x00200000
-#define BOARDREV_MASK	0x10100000
-
-#define SYSCLK_66	66666666
-#define SYSCLK_100	100000000
-
-unsigned long get_board_sys_clk(ulong dummy)
-{
-	ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
-	u32 val_gpdat, sysclk_gpio;
-
-	val_gpdat = in_be32(&pgpio->gpdat);
-	sysclk_gpio = val_gpdat & SYSCLK_MASK;
-
-	if (sysclk_gpio == 0)
-		return SYSCLK_66;
-	else
-		return SYSCLK_100;
-
-	return 0;
-}
-
-phys_size_t get_effective_memsize(void)
-{
-	return CONFIG_SYS_L2_SIZE;
-}
-
-void board_init_f(ulong bootflag)
-{
-	u32 plat_ratio, bus_clk;
-	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
-
-	console_init_f();
-
-	/* Set pmuxcr to allow both i2c1 and i2c2 */
-	setbits_be32(&gur->pmuxcr, in_be32(&gur->pmuxcr) | 0x1000);
-	setbits_be32(&gur->pmuxcr,
-		     in_be32(&gur->pmuxcr) | MPC85xx_PMUXCR_SD_DATA);
-
-	/* Read back the register to synchronize the write. */
-	in_be32(&gur->pmuxcr);
-
-#ifdef CONFIG_SPL_SPI_BOOT
-	clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_SD_DATA);
-#endif
-
-	/* initialize selected port with appropriate baud rate */
-	plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO;
-	plat_ratio >>= 1;
-	bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio;
-	gd->bus_clk = bus_clk;
-
-	NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
-		     bus_clk / 16 / CONFIG_BAUDRATE);
-#ifdef CONFIG_SPL_MMC_BOOT
-	puts("\nSD boot...\n");
-#elif defined(CONFIG_SPL_SPI_BOOT)
-	puts("\nSPI Flash boot...\n");
-#endif
-
-	/* copy code to RAM and jump to it - this should not return */
-	/* NOTE - code has to be copied out of NAND buffer before
-	 * other blocks can be read.
-	 */
-	relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE);
-}
-
-void board_init_r(gd_t *gd, ulong dest_addr)
-{
-	/* Pointer is writable since we allocated a register for it */
-	gd = (gd_t *)CONFIG_SPL_GD_ADDR;
-	bd_t *bd;
-
-	memset(gd, 0, sizeof(gd_t));
-	bd = (bd_t *)(CONFIG_SPL_GD_ADDR + sizeof(gd_t));
-	memset(bd, 0, sizeof(bd_t));
-	gd->bd = bd;
-	bd->bi_memstart = CONFIG_SYS_INIT_L2_ADDR;
-	bd->bi_memsize = CONFIG_SYS_L2_SIZE;
-
-	probecpu();
-	get_clocks();
-	mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
-			CONFIG_SPL_RELOC_MALLOC_SIZE);
-
-#ifdef CONFIG_SPL_MMC_BOOT
-	mmc_initialize(bd);
-#endif
-	/* relocate environment function pointers etc. */
-#ifdef CONFIG_SPL_NAND_BOOT
-	nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
-			    (uchar *)CONFIG_ENV_ADDR);
-#endif
-#ifdef CONFIG_SPL_NAND_BOOT
-	nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
-			    (uchar *)CONFIG_ENV_ADDR);
-#endif
-#ifdef CONFIG_SPL_MMC_BOOT
-	mmc_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
-			   (uchar *)CONFIG_ENV_ADDR);
-#endif
-#ifdef CONFIG_SPL_SPI_BOOT
-	spi_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
-			   (uchar *)CONFIG_ENV_ADDR);
-#endif
-
-	gd->env_addr  = (ulong)(CONFIG_ENV_ADDR);
-	gd->env_valid = 1;
-
-	gd->ram_size = initdram(0);
-#ifdef CONFIG_SPL_NAND_BOOT
-	puts("Tertiary program loader running in sram...");
-#else
-	puts("Second program loader running in sram...\n");
-#endif
-
-#ifdef CONFIG_SPL_MMC_BOOT
-	mmc_boot();
-#elif defined(CONFIG_SPL_SPI_BOOT)
-	spi_boot();
-#elif defined(CONFIG_SPL_NAND_BOOT)
-	nand_boot();
-#endif
-}
diff --git a/board/freescale/p1_p2_rdb/spl_minimal.c b/board/freescale/p1_p2_rdb/spl_minimal.c
deleted file mode 100644
index 96a4d1cb0a..0000000000
--- a/board/freescale/p1_p2_rdb/spl_minimal.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <ns16550.h>
-#include <asm/io.h>
-#include <nand.h>
-#include <linux/compiler.h>
-#include <asm/fsl_law.h>
-#include <fsl_ddr_sdram.h>
-#include <asm/global_data.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-#define SYSCLK_MASK	0x00200000
-#define BOARDREV_MASK	0x10100000
-
-#define SYSCLK_66	66666666
-#define SYSCLK_100	100000000
-
-unsigned long get_board_sys_clk(ulong dummy)
-{
-	ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
-	u32 val_gpdat, sysclk_gpio;
-
-	val_gpdat = in_be32(&pgpio->gpdat);
-	sysclk_gpio = val_gpdat & SYSCLK_MASK;
-
-	if (sysclk_gpio == 0)
-		return SYSCLK_66;
-	else
-		return SYSCLK_100;
-
-	return 0;
-}
-
-void board_init_f(ulong bootflag)
-{
-	u32 plat_ratio;
-	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
-
-#if defined(CONFIG_SYS_NAND_BR_PRELIM) && defined(CONFIG_SYS_NAND_OR_PRELIM)
-	set_lbc_br(0, CONFIG_SYS_NAND_BR_PRELIM);
-	set_lbc_or(0, CONFIG_SYS_NAND_OR_PRELIM);
-#endif
-
-	/* initialize selected port with appropriate baud rate */
-	plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO;
-	plat_ratio >>= 1;
-	gd->bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio;
-
-	NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
-		     gd->bus_clk / 16 / CONFIG_BAUDRATE);
-
-	puts("\nNAND boot... ");
-
-	/* copy code to RAM and jump to it - this should not return */
-	/* NOTE - code has to be copied out of NAND buffer before
-	 * other blocks can be read.
-	 */
-	relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE);
-}
-
-void board_init_r(gd_t *gd, ulong dest_addr)
-{
-	puts("\nSecond program loader running in sram...");
-	nand_boot();
-}
-
-void putc(char c)
-{
-	if (c == '\n')
-		NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, '\r');
-
-	NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, c);
-}
-
-void puts(const char *str)
-{
-	while (*str)
-		putc(*str++);
-}
diff --git a/board/freescale/p1_p2_rdb/tlb.c b/board/freescale/p1_p2_rdb/tlb.c
deleted file mode 100644
index 73f5729ef5..0000000000
--- a/board/freescale/p1_p2_rdb/tlb.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/mmu.h>
-
-struct fsl_e_tlb_entry tlb_table[] = {
-	/* TLB 0 - for temp stack in cache */
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR,
-			CONFIG_SYS_INIT_RAM_ADDR_PHYS,
-			MAS3_SX|MAS3_SW|MAS3_SR, 0,
-			0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 ,
-			CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024,
-			MAS3_SX|MAS3_SW|MAS3_SR, 0,
-			0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 ,
-			CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024,
-			MAS3_SX|MAS3_SW|MAS3_SR, 0,
-			0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 ,
-			CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024,
-			MAS3_SX|MAS3_SW|MAS3_SR, 0,
-			0, 0, BOOKE_PAGESZ_4K, 0),
-
-	/* TLB 1 */
-	/* *I*** - Covers boot page */
-	SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
-			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, 0, BOOKE_PAGESZ_4K, 1),
-
-	/* *I*G* - CCSRBAR */
-	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
-			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, 1, BOOKE_PAGESZ_1M, 1),
-
-#ifndef CONFIG_SPL_BUILD
-	/* W**G* - Flash/promjet, localbus */
-	/* This will be changed to *I*G* after relocation to RAM. */
-	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
-			MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
-			0, 2, BOOKE_PAGESZ_16M, 1),
-
-#if defined(CONFIG_PCI)
-	/* *I*G* - PCI */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS,
-			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, 3, BOOKE_PAGESZ_1G, 1),
-
-	/* *I*G* - PCI I/O */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS,
-			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, 4, BOOKE_PAGESZ_256K, 1),
-
-#endif /* #if defined(CONFIG_PCI) */
-#endif
-	/* *I*G - NAND */
-	SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
-			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, 5, BOOKE_PAGESZ_1M, 1),
-
-	/* *I*G - VSC7385 Switch */
-	SET_TLB_ENTRY(1, CONFIG_SYS_VSC7385_BASE, CONFIG_SYS_VSC7385_BASE_PHYS,
-			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, 6, BOOKE_PAGESZ_1M, 1),
-
-#ifdef CONFIG_SYS_INIT_L2_ADDR
-	/* *I*G - L2SRAM */
-	SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_G,
-		      0, 11, BOOKE_PAGESZ_256K, 1),
-#if CONFIG_SYS_L2_SIZE >= (256 << 10)
-	SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR + 0x40000,
-		      CONFIG_SYS_INIT_L2_ADDR_PHYS + 0x40000,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 12, BOOKE_PAGESZ_256K, 1),
-#endif
-#endif
-
-#if defined(CONFIG_SYS_RAMBOOT) || \
-	(defined(CONFIG_SPL) && !defined(CONFIG_SPL_COMMON_INIT_DDR))
-	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
-			MAS3_SX|MAS3_SW|MAS3_SR, 0,
-			0, 7, BOOKE_PAGESZ_1G, 1)
-#endif
-};
-
-int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/freescale/p2020come/Kconfig b/board/freescale/p2020come/Kconfig
deleted file mode 100644
index 8ce5cf1300..0000000000
--- a/board/freescale/p2020come/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_P2020COME
-
-config SYS_BOARD
-	default "p2020come"
-
-config SYS_VENDOR
-	default "freescale"
-
-config SYS_CONFIG_NAME
-	default "P2020COME"
-
-endif
diff --git a/board/freescale/p2020come/MAINTAINERS b/board/freescale/p2020come/MAINTAINERS
deleted file mode 100644
index ab3ef94583..0000000000
--- a/board/freescale/p2020come/MAINTAINERS
+++ /dev/null
@@ -1,7 +0,0 @@
-P2020COME BOARD
-M:	Ira W. Snyder <iws@ovro.caltech.edu>
-S:	Maintained
-F:	board/freescale/p2020come/
-F:	include/configs/P2020COME.h
-F:	configs/P2020COME_SDCARD_defconfig
-F:	configs/P2020COME_SPIFLASH_defconfig
diff --git a/board/freescale/p2020come/Makefile b/board/freescale/p2020come/Makefile
deleted file mode 100644
index 4857136f1f..0000000000
--- a/board/freescale/p2020come/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# Copyright 2009 Freescale Semiconductor, Inc.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y			+= p2020come.o
-obj-y			+= ddr.o
-obj-y			+= law.o
-obj-y			+= tlb.o
diff --git a/board/freescale/p2020come/ddr.c b/board/freescale/p2020come/ddr.c
deleted file mode 100644
index b642e1255c..0000000000
--- a/board/freescale/p2020come/ddr.c
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Copyright 2009, 2011 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#include <common.h>
-
-#include <fsl_ddr_sdram.h>
-#include <fsl_ddr_dimm_params.h>
-
-void fsl_ddr_board_options(memctl_options_t *popts,
-				dimm_params_t *pdimm,
-				unsigned int ctrl_num)
-{
-	if (ctrl_num) {
-		printf("Wrong parameter for controller number %d", ctrl_num);
-		return;
-	}
-
-	if (!pdimm->n_ranks)
-		return;
-
-	/*
-	 * Set DDR_SDRAM_CLK_CNTL = 0x02800000
-	 *
-	 * Clock is launched 5/8 applied cycle after address/command
-	 */
-	popts->clk_adjust = 5;
-}
diff --git a/board/freescale/p2020come/law.c b/board/freescale/p2020come/law.c
deleted file mode 100644
index 7048a0823e..0000000000
--- a/board/freescale/p2020come/law.c
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * Copyright 2009 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/fsl_law.h>
-#include <asm/mmu.h>
-
-/*
- * Create a dummy LAW entry for the DDR SDRAM which will be replaced when
- * the DDR SPD setup code runs.
- *
- * This table would be empty, except that it is used before the BSS section is
- * initialized, and therefore must have at least one entry to push it into
- * the DATA section.
- */
-struct law_entry law_table[] = {
-	SET_LAW(CONFIG_SYS_SDRAM_BASE, LAW_SIZE_4K, LAW_TRGT_IF_DDR),
-};
-
-int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/p2020come/p2020come.c b/board/freescale/p2020come/p2020come.c
deleted file mode 100644
index 1db37e3be8..0000000000
--- a/board/freescale/p2020come/p2020come.c
+++ /dev/null
@@ -1,275 +0,0 @@
-/*
- * Copyright 2009,2012 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <hwconfig.h>
-#include <command.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-#include <asm/cache.h>
-#include <asm/immap_85xx.h>
-#include <asm/mpc85xx_gpio.h>
-#include <asm/fsl_serdes.h>
-#include <asm/io.h>
-#include <miiphy.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-#include <fsl_mdio.h>
-#include <tsec.h>
-#include <vsc7385.h>
-#include <netdev.h>
-#include <mmc.h>
-#include <malloc.h>
-#include <i2c.h>
-
-#if defined(CONFIG_PCI)
-#include <asm/fsl_pci.h>
-#include <pci.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_PCI)
-void pci_init_board(void)
-{
-	fsl_pcie_init_board(0);
-}
-
-void ft_pci_board_setup(void *blob)
-{
-	FT_FSL_PCI_SETUP;
-}
-#endif
-
-#define BOARD_PERI_RST_SET	(VSC7385_RST_SET | SLIC_RST_SET | \
-				 SGMII_PHY_RST_SET | PCIE_RST_SET | \
-				 RGMII_PHY_RST_SET)
-
-#define SYSCLK_MASK	0x00200000
-#define BOARDREV_MASK	0x10100000
-#define BOARDREV_B	0x10100000
-#define BOARDREV_C	0x00100000
-#define BOARDREV_D	0x00000000
-
-#define SYSCLK_66	66666666
-#define SYSCLK_50	50000000
-#define SYSCLK_100	100000000
-
-unsigned long get_board_sys_clk(ulong dummy)
-{
-	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	u32 ddr_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO;
-
-	ddr_ratio >>= MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
-	switch (ddr_ratio) {
-	case 0x0C:
-		return SYSCLK_66;
-	case 0x0A:
-	case 0x08:
-		return SYSCLK_100;
-	default:
-		puts("ERROR: unknown DDR ratio\n");
-		return SYSCLK_100;
-	}
-}
-
-unsigned long get_board_ddr_clk(ulong dummy)
-{
-	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	u32 ddr_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO;
-
-	ddr_ratio >>= MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
-	switch (ddr_ratio) {
-	case 0x0C:
-	case 0x0A:
-		return SYSCLK_66;
-	case 0x08:
-		return SYSCLK_100;
-	default:
-		puts("ERROR: unknown DDR ratio\n");
-		return SYSCLK_100;
-	}
-}
-
-#ifdef CONFIG_MMC
-int board_early_init_f(void)
-{
-	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-
-	setbits_be32(&gur->pmuxcr,
-			(MPC85xx_PMUXCR_SDHC_CD |
-			 MPC85xx_PMUXCR_SDHC_WP));
-
-	/* All the device are enable except for SRIO12 */
-	setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_SRIO);
-	return 0;
-}
-#endif
-
-#define GPIO_DIR		0x0f3a0000
-#define GPIO_ODR		0x00000000
-#define GPIO_DAT		0x001a0000
-
-int checkboard(void)
-{
-	ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR + 0xC00);
-
-	/*
-	 * GPIO
-	 * 0 - 3: CarryBoard Input;
-	 * 4 - 7: CarryBoard Output;
-	 * 8 : Mux as SDHC_CD (card detection)
-	 * 9 : Mux as SDHC_WP
-	 * 10 : Clear Watchdog timer
-	 * 11 : LED Input
-	 * 12 : Output to 1
-	 * 13 : Open Drain
-	 * 14 : LED Output
-	 * 15 : Switch Input
-	 *
-	 * Set GPIOs 11, 12, 14 to 1.
-	 */
-	out_be32(&pgpio->gpodr, GPIO_ODR);
-	mpc85xx_gpio_set(0xffffffff, GPIO_DIR, GPIO_DAT);
-
-	puts("Board: Freescale COM Express P2020\n");
-	return 0;
-}
-
-#define M41ST85W_I2C_BUS	1
-#define M41ST85W_I2C_ADDR	0x68
-#define M41ST85W_ERROR(fmt, args...) printf("ERROR: M41ST85W: " fmt, ##args)
-
-static void m41st85w_clear_bit(u8 reg, u8 mask, const char *name)
-{
-	u8 data;
-
-	if (i2c_read(M41ST85W_I2C_ADDR, reg, 1, &data, 1)) {
-		M41ST85W_ERROR("unable to read %s bit\n", name);
-		return;
-	}
-
-	if (data & mask) {
-		data &= ~mask;
-		if (i2c_write(M41ST85W_I2C_ADDR, reg, 1, &data, 1)) {
-			M41ST85W_ERROR("unable to clear %s bit\n", name);
-			return;
-		}
-	}
-}
-
-#define M41ST85W_REG_SEC2	0x01
-#define M41ST85W_REG_SEC2_ST	0x80
-
-#define M41ST85W_REG_ALHOUR	0x0c
-#define M41ST85W_REG_ALHOUR_HT	0x40
-
-/*
- * The P2020COME board has a STMicro M41ST85W RTC/watchdog
- * at i2c bus 1 address 0x68.
- */
-static void start_rtc(void)
-{
-	unsigned int bus = i2c_get_bus_num();
-
-	if (i2c_set_bus_num(M41ST85W_I2C_BUS)) {
-		M41ST85W_ERROR("unable to set i2c bus\n");
-		goto out;
-	}
-
-	/* ensure ST (stop) and HT (halt update) bits are cleared */
-	m41st85w_clear_bit(M41ST85W_REG_SEC2, M41ST85W_REG_SEC2_ST, "ST");
-	m41st85w_clear_bit(M41ST85W_REG_ALHOUR, M41ST85W_REG_ALHOUR_HT, "HT");
-
-out:
-	/* reset the i2c bus */
-	i2c_set_bus_num(bus);
-}
-
-int board_early_init_r(void)
-{
-	start_rtc();
-	return 0;
-}
-
-#define M41ST85W_REG_WATCHDOG		0x09
-#define M41ST85W_REG_WATCHDOG_WDS	0x80
-#define M41ST85W_REG_WATCHDOG_BMB0	0x04
-
-void board_reset(void)
-{
-	u8 data = M41ST85W_REG_WATCHDOG_WDS | M41ST85W_REG_WATCHDOG_BMB0;
-
-	/* set the hardware watchdog timeout to 1/16 second, then hang */
-	i2c_set_bus_num(M41ST85W_I2C_BUS);
-	i2c_write(M41ST85W_I2C_ADDR, M41ST85W_REG_WATCHDOG, 1, &data, 1);
-
-	while (1)
-		/* hang */;
-}
-
-#ifdef CONFIG_TSEC_ENET
-int board_eth_init(bd_t *bis)
-{
-	struct fsl_pq_mdio_info mdio_info;
-	struct tsec_info_struct tsec_info[4];
-	int num = 0;
-
-#ifdef CONFIG_TSEC1
-	SET_STD_TSEC_INFO(tsec_info[num], 1);
-	num++;
-#endif
-#ifdef CONFIG_TSEC2
-	SET_STD_TSEC_INFO(tsec_info[num], 2);
-	num++;
-#endif
-#ifdef CONFIG_TSEC3
-	SET_STD_TSEC_INFO(tsec_info[num], 3);
-	if (is_serdes_configured(SGMII_TSEC3)) {
-		puts("eTSEC3 is in sgmii mode.");
-		tsec_info[num].flags |= TSEC_SGMII;
-	}
-	num++;
-#endif
-	if (!num) {
-		printf("No TSECs initialized\n");
-		return 0;
-	}
-
-	mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
-	mdio_info.name = DEFAULT_MII_NAME;
-	fsl_pq_mdio_init(bis, &mdio_info);
-
-	tsec_eth_init(bis, tsec_info, num);
-
-	return pci_eth_init(bis);
-}
-#endif
-
-#if defined(CONFIG_OF_BOARD_SETUP)
-int ft_board_setup(void *blob, bd_t *bd)
-{
-	phys_addr_t base;
-	phys_size_t size;
-
-	ft_cpu_setup(blob, bd);
-
-	base = getenv_bootm_low();
-	size = getenv_bootm_size();
-
-#if defined(CONFIG_PCI)
-	ft_pci_board_setup(blob);
-#endif
-
-	fdt_fixup_memory(blob, (u64)base, (u64)size);
-
-#ifdef CONFIG_HAS_FSL_DR_USB
-	fdt_fixup_dr_usb(blob, bd);
-#endif
-
-	return 0;
-}
-#endif
diff --git a/board/freescale/p2020come/tlb.c b/board/freescale/p2020come/tlb.c
deleted file mode 100644
index 08a1e3433a..0000000000
--- a/board/freescale/p2020come/tlb.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/mmu.h>
-
-struct fsl_e_tlb_entry tlb_table[] = {
-	/* TLB 0 - for temp stack in cache */
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR,
-			CONFIG_SYS_INIT_RAM_ADDR_PHYS,
-			MAS3_SW|MAS3_SR, 0,
-			0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 ,
-			CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024,
-			MAS3_SW|MAS3_SR, 0,
-			0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 ,
-			CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024,
-			MAS3_SW|MAS3_SR, 0,
-			0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 ,
-			CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024,
-			MAS3_SW|MAS3_SR, 0,
-			0, 0, BOOKE_PAGESZ_4K, 0),
-
-	/* TLB 1 */
-	/* *I*** - Covers boot page */
-	SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
-			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, 0, BOOKE_PAGESZ_4K, 1),
-
-	/* *I*G* - CCSRBAR */
-	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
-			MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, 1, BOOKE_PAGESZ_1M, 1),
-
-#if defined(CONFIG_PCI)
-	/* *I*G* - PCI3 - PCI2 0x8000,0000 - 0xbfff,ffff, size = 1G */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT, CONFIG_SYS_PCIE3_MEM_PHYS,
-			MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, 2, BOOKE_PAGESZ_1G, 1),
-
-	/* *I*G* - PCI1 0xC000,0000 - 0xcfff,ffff, size = 256M */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_VIRT,
-			MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, 3, BOOKE_PAGESZ_256M, 1),
-
-	/* *I*G* - PCI1  0xD000,0000 - 0xDFFF,FFFF, size = 256M */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT + 0x10000000,
-			CONFIG_SYS_PCIE1_MEM_PHYS + 0x10000000,
-			MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, 4, BOOKE_PAGESZ_256M, 1),
-
-	/*
-	 * *I*G* - PCI I/O
-	 *
-	 * PCI3 => 0xFFC10000
-	 * PCI2 => 0xFFC2,0000
-	 * PCI1 => 0xFFC3,0000
-	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_IO_VIRT, CONFIG_SYS_PCIE3_IO_PHYS,
-			MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, 5, BOOKE_PAGESZ_256K, 1),
-#endif /* #if defined(CONFIG_PCI) */
-
-#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR)
-	/* *I*G - DDR3  2G     Part 1: 0 - 0x3fff,ffff , size = 1G */
-	SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS,
-			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, 6, BOOKE_PAGESZ_256K, 1),
-
-	/*        DDR3  2G     Part 2: 0x4000,0000 - 0x7fff,ffff , size = 1G */
-	SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR + 0x40000,
-			CONFIG_SYS_INIT_L2_ADDR_PHYS + 0x40000,
-			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, 7, BOOKE_PAGESZ_256K, 1),
-#endif
-};
-
-int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/freescale/p2020ds/Kconfig b/board/freescale/p2020ds/Kconfig
deleted file mode 100644
index e527ec9722..0000000000
--- a/board/freescale/p2020ds/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_P2020DS
-
-config SYS_BOARD
-	default "p2020ds"
-
-config SYS_VENDOR
-	default "freescale"
-
-config SYS_CONFIG_NAME
-	default "P2020DS"
-
-endif
diff --git a/board/freescale/p2020ds/MAINTAINERS b/board/freescale/p2020ds/MAINTAINERS
deleted file mode 100644
index cb61fc51fb..0000000000
--- a/board/freescale/p2020ds/MAINTAINERS
+++ /dev/null
@@ -1,10 +0,0 @@
-P2020DS BOARD
-#M:	-
-S:	Maintained
-F:	board/freescale/p2020ds/
-F:	include/configs/P2020DS.h
-F:	configs/P2020DS_defconfig
-F:	configs/P2020DS_36BIT_defconfig
-F:	configs/P2020DS_DDR2_defconfig
-F:	configs/P2020DS_SDCARD_defconfig
-F:	configs/P2020DS_SPIFLASH_defconfig
diff --git a/board/freescale/p2020ds/Makefile b/board/freescale/p2020ds/Makefile
deleted file mode 100644
index ee00806d73..0000000000
--- a/board/freescale/p2020ds/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-#
-# Copyright 2007-2009 Freescale Semiconductor, Inc.
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	+= p2020ds.o
-obj-y	+= ddr.o
-obj-y	+= law.o
-obj-y	+= tlb.o
diff --git a/board/freescale/p2020ds/ddr.c b/board/freescale/p2020ds/ddr.c
deleted file mode 100644
index debe70b18b..0000000000
--- a/board/freescale/p2020ds/ddr.c
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * Copyright 2008-2009 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-
-#include <fsl_ddr_sdram.h>
-#include <fsl_ddr_dimm_params.h>
-
-struct board_specific_parameters {
-	u32 n_ranks;
-	u32 datarate_mhz_high;
-	u32 clk_adjust;
-	u32 cpo;
-	u32 write_data_delay;
-	u32 force_2t;
-};
-
-
-/*
- * This table contains all valid speeds we want to override with board
- * specific parameters. datarate_mhz_high values need to be in ascending order
- * for each n_ranks group.
- *
- * ranges for parameters:
- *  wr_data_delay = 0-6
- *  clk adjust = 0-8
- *  cpo 2-0x1E (30)
- */
-static const struct board_specific_parameters dimm0[] = {
-	/*
-	 * memory controller 0
-	 *   num|  hi|  clk| cpo|wrdata|2T
-	 * ranks| mhz|adjst|    | delay|
-	 */
-#ifdef CONFIG_SYS_FSL_DDR2
-	{2,  549,    4,   0x1f,    2,  0},
-	{2,  680,    4,   0x1f,    3,  0},
-	{2,  850,    4,   0x1f,    4,  0},
-	{1,  549,    4,   0x1f,    2,  0},
-	{1,  680,    4,   0x1f,    3,  0},
-	{1,  850,    4,   0x1f,    4,  0},
-#else
-	{2,  850,    6,   0x1f,    4,  0},
-	{1,  850,    4,   0x1f,    4,  0},
-#endif
-	{}
-};
-
-void fsl_ddr_board_options(memctl_options_t *popts,
-				dimm_params_t *pdimm,
-				unsigned int ctrl_num)
-{
-	const struct board_specific_parameters *pbsp, *pbsp_highest = NULL;
-	ulong ddr_freq;
-	int i;
-
-	if (ctrl_num) {
-		printf("Wrong parameter for controller number %d", ctrl_num);
-		return;
-	}
-	if (!pdimm->n_ranks)
-		return;
-
-	/*
-	 * set odt_rd_cfg and odt_wr_cfg. If the there is only one dimm in
-	 * that controller, set odt_wr_cfg to 4 for CS0, and 0 to CS1. If
-	 * there are two dimms in the controller, set odt_rd_cfg to 3 and
-	 * odt_wr_cfg to 3 for the even CS, 0 for the odd CS.
-	 */
-	for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
-		popts->cs_local_opts[i].odt_rd_cfg = 0;
-		popts->cs_local_opts[i].odt_wr_cfg = 1;
-	}
-
-	pbsp = dimm0;
-
-	/* Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr
-	 * freqency and n_banks specified in board_specific_parameters table.
-	 */
-	ddr_freq = get_ddr_freq(0) / 1000000;
-	while (pbsp->datarate_mhz_high) {
-		if (pbsp->n_ranks == pdimm->n_ranks) {
-			if (ddr_freq <= pbsp->datarate_mhz_high) {
-				popts->clk_adjust = pbsp->clk_adjust;
-				popts->cpo_override = pbsp->cpo;
-				popts->write_data_delay =
-					pbsp->write_data_delay;
-				popts->twot_en = pbsp->force_2t;
-				goto found;
-			}
-			pbsp_highest = pbsp;
-		}
-		pbsp++;
-	}
-
-	if (pbsp_highest) {
-		printf("Error: board specific timing not found "
-			"for data rate %lu MT/s!\n"
-			"Trying to use the highest speed (%u) parameters\n",
-			ddr_freq, pbsp_highest->datarate_mhz_high);
-		popts->clk_adjust = pbsp_highest->clk_adjust;
-		popts->cpo_override = pbsp_highest->cpo;
-		popts->write_data_delay = pbsp_highest->write_data_delay;
-		popts->twot_en = pbsp_highest->force_2t;
-	} else {
-		panic("DIMM is not supported by this board");
-	}
-
-found:
-	/*
-	 * Factors to consider for half-strength driver enable:
-	 *	- number of DIMMs installed
-	 */
-	popts->half_strength_driver_enable = 0;
-	popts->wrlvl_en = 1;
-	/* Write leveling override */
-	popts->wrlvl_override = 1;
-	popts->wrlvl_sample = 0xa;
-	popts->wrlvl_start = 0x8;
-	/* Rtt and Rtt_WR override */
-	popts->rtt_override = 1;
-	popts->rtt_override_value = DDR3_RTT_120_OHM;
-	popts->rtt_wr_override_value = 0; /* Rtt_WR= dynamic ODT off */
-}
diff --git a/board/freescale/p2020ds/law.c b/board/freescale/p2020ds/law.c
deleted file mode 100644
index 9cd4da9780..0000000000
--- a/board/freescale/p2020ds/law.c
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * Copyright 2008-2010 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/fsl_law.h>
-#include <asm/mmu.h>
-
-struct law_entry law_table[] = {
-	SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
-	SET_LAW(PIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_LBC),
-	SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC),
-};
-
-int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/p2020ds/p2020ds.c b/board/freescale/p2020ds/p2020ds.c
deleted file mode 100644
index 5d18e8de75..0000000000
--- a/board/freescale/p2020ds/p2020ds.c
+++ /dev/null
@@ -1,263 +0,0 @@
-/*
- * Copyright 2007-2012 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <pci.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-#include <asm/cache.h>
-#include <asm/immap_85xx.h>
-#include <asm/fsl_pci.h>
-#include <fsl_ddr_sdram.h>
-#include <asm/io.h>
-#include <asm/fsl_serdes.h>
-#include <miiphy.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-#include <fsl_mdio.h>
-#include <tsec.h>
-#include <asm/fsl_law.h>
-#include <netdev.h>
-
-#include "../common/ngpixis.h"
-#include "../common/sgmii_riser.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_early_init_f(void)
-{
-#ifdef CONFIG_MMC
-	ccsr_gur_t *gur = (ccsr_gur_t *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-
-	setbits_be32(&gur->pmuxcr,
-			 (MPC85xx_PMUXCR_SDHC_CD |
-			 MPC85xx_PMUXCR_SDHC_WP));
-#endif
-
-	return 0;
-}
-
-int checkboard(void)
-{
-	u8 sw;
-
-	printf("Board: P2020DS Sys ID: 0x%02x, "
-	       "Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
-		in_8(&pixis->id), in_8(&pixis->arch), in_8(&pixis->scver));
-
-	sw = in_8(&PIXIS_SW(PIXIS_LBMAP_SWITCH));
-	sw = (sw & PIXIS_LBMAP_MASK) >> PIXIS_LBMAP_SHIFT;
-
-	if (sw < 0x8)
-		/* The lower two bits are the actual vbank number */
-		printf("vBank: %d\n", sw & 3);
-	else
-		puts("Promjet\n");
-
-	return 0;
-}
-
-#if !defined(CONFIG_DDR_SPD)
-/*
- * Fixed sdram init -- doesn't use serial presence detect.
- */
-
-phys_size_t fixed_sdram(void)
-{
-	struct ccsr_ddr __iomem *ddr =
-		(struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR;
-	uint d_init;
-
-	ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;
-	ddr->timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
-	ddr->timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
-	ddr->sdram_mode = CONFIG_SYS_DDR_MODE_1;
-	ddr->sdram_mode_2 = CONFIG_SYS_DDR_MODE_2;
-	ddr->sdram_md_cntl = CONFIG_SYS_DDR_MODE_CTRL;
-	ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL;
-	ddr->sdram_data_init = CONFIG_SYS_DDR_DATA_INIT;
-	ddr->sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL;
-	ddr->sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL2;
-	ddr->ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CNTL;
-	ddr->ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CNTL;
-	ddr->ddr_cdr1 = CONFIG_SYS_DDR_CDR1;
-	ddr->timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4;
-	ddr->timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5;
-
-	if (!strcmp("performance", getenv("perf_mode"))) {
-		/* Performance Mode Values */
-
-		ddr->cs1_config = CONFIG_SYS_DDR_CS1_CONFIG_PERF;
-		ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS_PERF;
-		ddr->cs1_bnds = CONFIG_SYS_DDR_CS1_BNDS_PERF;
-		ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_PERF;
-		ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_PERF;
-
-		asm("sync;isync");
-
-		udelay(500);
-
-		ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL_PERF;
-	} else {
-		/* Stable Mode Values */
-
-		ddr->cs1_config = CONFIG_SYS_DDR_CS1_CONFIG;
-		ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
-		ddr->cs1_bnds = CONFIG_SYS_DDR_CS1_BNDS;
-		ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
-		ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
-
-		/* ECC will be assumed in stable mode */
-		ddr->err_int_en = CONFIG_SYS_DDR_ERR_INT_EN;
-		ddr->err_disable = CONFIG_SYS_DDR_ERR_DIS;
-		ddr->err_sbe = CONFIG_SYS_DDR_SBE;
-
-		asm("sync;isync");
-
-		udelay(500);
-
-		ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL;
-	}
-
-#if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-	d_init = 1;
-	debug("DDR - 1st controller: memory initializing\n");
-	/*
-	 * Poll until memory is initialized.
-	 * 512 Meg at 400 might hit this 200 times or so.
-	 */
-	while ((ddr->sdram_cfg_2 & (d_init << 4)) != 0)
-		udelay(1000);
-	debug("DDR: memory initialized\n\n");
-	asm("sync; isync");
-	udelay(500);
-#endif
-
-	if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE,
-			 CONFIG_SYS_SDRAM_SIZE * 1024 * 1024,
-			 LAW_TRGT_IF_DDR) < 0) {
-		printf("ERROR setting Local Access Windows for DDR\n");
-		return 0;
-	};
-
-	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
-}
-
-#endif
-
-#ifdef CONFIG_PCI
-void pci_init_board(void)
-{
-	fsl_pcie_init_board(0);
-}
-#endif
-
-int board_early_init_r(void)
-{
-	const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
-	int flash_esel = find_tlb_idx((void *)flashbase, 1);
-
-	/*
-	 * Remap Boot flash + PROMJET region to caching-inhibited
-	 * so that flash can be erased properly.
-	 */
-
-	/* Flush d-cache and invalidate i-cache of any FLASH data */
-	flush_dcache();
-	invalidate_icache();
-
-	if (flash_esel == -1) {
-		/* very unlikely unless something is messed up */
-		puts("Error: Could not find TLB for FLASH BASE\n");
-		flash_esel = 2;	/* give our best effort to continue */
-	} else {
-		/* invalidate existing TLB entry for flash + promjet */
-		disable_tlb(flash_esel);
-	}
-
-	set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
-			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, flash_esel, BOOKE_PAGESZ_256M, 1);
-
-	return 0;
-}
-
-#ifdef CONFIG_TSEC_ENET
-int board_eth_init(bd_t *bis)
-{
-	struct fsl_pq_mdio_info mdio_info;
-	struct tsec_info_struct tsec_info[4];
-	int num = 0;
-
-#ifdef CONFIG_TSEC1
-	SET_STD_TSEC_INFO(tsec_info[num], 1);
-	num++;
-#endif
-#ifdef CONFIG_TSEC2
-	SET_STD_TSEC_INFO(tsec_info[num], 2);
-	if (is_serdes_configured(SGMII_TSEC2)) {
-		puts("eTSEC2 is in sgmii mode.\n");
-		tsec_info[num].flags |= TSEC_SGMII;
-	}
-	num++;
-#endif
-#ifdef CONFIG_TSEC3
-	SET_STD_TSEC_INFO(tsec_info[num], 3);
-	if (is_serdes_configured(SGMII_TSEC3)) {
-		puts("eTSEC3 is in sgmii mode.\n");
-		tsec_info[num].flags |= TSEC_SGMII;
-}
-	num++;
-#endif
-
-	if (!num) {
-		printf("No TSECs initialized\n");
-
-		return 0;
-	}
-
-#ifdef CONFIG_FSL_SGMII_RISER
-	fsl_sgmii_riser_init(tsec_info, num);
-#endif
-
-	mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
-	mdio_info.name = DEFAULT_MII_NAME;
-
-	fsl_pq_mdio_init(bis, &mdio_info);
-
-	tsec_eth_init(bis, tsec_info, num);
-
-	return pci_eth_init(bis);
-}
-#endif
-
-#if defined(CONFIG_OF_BOARD_SETUP)
-int ft_board_setup(void *blob, bd_t *bd)
-{
-	phys_addr_t base;
-	phys_size_t size;
-
-	ft_cpu_setup(blob, bd);
-
-	base = getenv_bootm_low();
-	size = getenv_bootm_size();
-
-	fdt_fixup_memory(blob, (u64)base, (u64)size);
-
-#ifdef CONFIG_HAS_FSL_DR_USB
-	fdt_fixup_dr_usb(blob, bd);
-#endif
-
-	FT_FSL_PCI_SETUP;
-
-#ifdef CONFIG_FSL_SGMII_RISER
-	fsl_sgmii_riser_fdt_fixup(blob);
-#endif
-
-	return 0;
-}
-#endif
diff --git a/board/freescale/p2020ds/tlb.c b/board/freescale/p2020ds/tlb.c
deleted file mode 100644
index 02da6e8c43..0000000000
--- a/board/freescale/p2020ds/tlb.c
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * Copyright 2008-2011 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/mmu.h>
-
-struct fsl_e_tlb_entry tlb_table[] = {
-	/* TLB 0 - for temp stack in cache */
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
-		      CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
-		      CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
-		      CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 0, BOOKE_PAGESZ_4K, 0),
-
-	/* TLB 1 */
-	/* *I*** - Covers boot page */
-	SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 0, BOOKE_PAGESZ_4K, 1),
-
-	/* *I*G* - CCSRBAR */
-	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 1, BOOKE_PAGESZ_1M, 1),
-
-	/* W**G* - Flash/promjet, localbus */
-	/* This will be changed to *I*G* after relocation to RAM. */
-	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
-		      MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
-		      0, 2, BOOKE_PAGESZ_256M, 1),
-
-	/* *I*G* - PCI */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT, CONFIG_SYS_PCIE3_MEM_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 3, BOOKE_PAGESZ_1G, 1),
-
-	/* *I*G* - PCI */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT + 0x40000000,
-		      CONFIG_SYS_PCIE3_MEM_PHYS + 0x40000000,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 4, BOOKE_PAGESZ_256M, 1),
-
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT + 0x50000000,
-		      CONFIG_SYS_PCIE3_MEM_PHYS + 0x50000000,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 5, BOOKE_PAGESZ_256M, 1),
-
-	/* *I*G* - PCI I/O */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_IO_VIRT, CONFIG_SYS_PCIE3_IO_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 6, BOOKE_PAGESZ_256K, 1),
-
-	/* *I*G - NAND */
-	SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 7, BOOKE_PAGESZ_1M, 1),
-
-	SET_TLB_ENTRY(1, PIXIS_BASE, PIXIS_BASE_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 8, BOOKE_PAGESZ_4K, 1),
-
-#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR)
-	/* *I*G - L2SRAM */
-	SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 9, BOOKE_PAGESZ_256K, 1),
-	SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR + 0x40000,
-		      CONFIG_SYS_INIT_L2_ADDR_PHYS + 0x40000,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 10, BOOKE_PAGESZ_256K, 1),
-#endif
-};
-
-int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/freescale/t102xqds/ddr.c b/board/freescale/t102xqds/ddr.c
index 46fc64e528..2d4d10f351 100644
--- a/board/freescale/t102xqds/ddr.c
+++ b/board/freescale/t102xqds/ddr.c
@@ -11,6 +11,7 @@
 #include <fsl_ddr_sdram.h>
 #include <fsl_ddr_dimm_params.h>
 #include <asm/fsl_law.h>
+#include <asm/mpc85xx_gpio.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -152,6 +153,19 @@ found:
 #endif
 }
 
+#if defined(CONFIG_DEEP_SLEEP)
+void board_mem_sleep_setup(void)
+{
+	void __iomem *qixis_base = (void *)QIXIS_BASE;
+
+	/* does not provide HW signals for power management */
+	clrbits_8(qixis_base + 0x21, 0x2);
+	/* Disable MCKE isolation */
+	gpio_set_value(2, 0);
+	udelay(1);
+}
+#endif
+
 phys_size_t initdram(int board_type)
 {
 	phys_size_t dram_size;
@@ -166,5 +180,10 @@ phys_size_t initdram(int board_type)
 	/* DDR has been initialised by first stage boot loader */
 	dram_size =  fsl_ddr_sdram_size();
 #endif
+
+#if defined(CONFIG_DEEP_SLEEP) && !defined(CONFIG_SPL_BUILD)
+	fsl_dp_resume();
+#endif
+
 	return dram_size;
 }
diff --git a/board/freescale/t102xqds/t102xqds.c b/board/freescale/t102xqds/t102xqds.c
index f3141b58e8..708afcaebf 100644
--- a/board/freescale/t102xqds/t102xqds.c
+++ b/board/freescale/t102xqds/t102xqds.c
@@ -19,10 +19,10 @@
 #include <asm/fsl_liodn.h>
 #include <fm_eth.h>
 #include <hwconfig.h>
-#include <asm/mpc85xx_gpio.h>
 #include "../common/qixis.h"
 #include "t102xqds.h"
 #include "t102xqds_qixis.h"
+#include "../common/sleep.h"
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -242,6 +242,16 @@ void board_retimer_ds125df111_init(void)
 	i2c_write(I2C_RETIMER_ADDR, 0x64, 1, &reg, 1);
 }
 
+int board_early_init_f(void)
+{
+#if defined(CONFIG_DEEP_SLEEP)
+	if (is_warm_boot())
+		fsl_dp_disable_console();
+#endif
+
+	return 0;
+}
+
 int board_early_init_r(void)
 {
 #ifdef CONFIG_SYS_FLASH_BASE
@@ -395,14 +405,3 @@ void qixis_dump_switch(void)
 		printf("SW%d = (0x%02x)\n", i, QIXIS_READ(cms[1]));
 	}
 }
-
-#ifdef CONFIG_DEEP_SLEEP
-void board_mem_sleep_setup(void)
-{
-	/* does not provide HW signals for power management */
-	QIXIS_WRITE(pwr_ctl[1], (QIXIS_READ(pwr_ctl[1]) & ~0x2));
-	/* Disable MCKE isolation */
-	gpio_set_value(2, 0);
-	udelay(1);
-}
-#endif
diff --git a/board/freescale/t102xrdb/cpld.h b/board/freescale/t102xrdb/cpld.h
index 5a3100f607..db50f818fb 100644
--- a/board/freescale/t102xrdb/cpld.h
+++ b/board/freescale/t102xrdb/cpld.h
@@ -43,3 +43,7 @@ void cpld_write(unsigned int reg, u8 value);
 #define CPLD_LBMAP_RESET	0xFF
 #define CPLD_LBMAP_SHIFT	0x03
 #define CPLD_BOOT_SEL	   0x80
+
+#define CPLD_PCIE_SGMII_MUX	0x80
+#define CPLD_OVERRIDE_BOOT_EN	0x01
+#define CPLD_OVERRIDE_MUX_EN	0x02 /* PCIE/2.5G-SGMII mux override enable */
diff --git a/board/freescale/t102xrdb/ddr.c b/board/freescale/t102xrdb/ddr.c
index a20330b1d0..a2a8f4ccf0 100644
--- a/board/freescale/t102xrdb/ddr.c
+++ b/board/freescale/t102xrdb/ddr.c
@@ -11,6 +11,7 @@
 #include <fsl_ddr_sdram.h>
 #include <fsl_ddr_dimm_params.h>
 #include <asm/fsl_law.h>
+#include <asm/mpc85xx_gpio.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -136,6 +137,19 @@ found:
 #endif
 }
 
+#if defined(CONFIG_DEEP_SLEEP)
+void board_mem_sleep_setup(void)
+{
+	void __iomem *cpld_base = (void *)CONFIG_SYS_CPLD_BASE;
+
+	/* does not provide HW signals for power management */
+	clrbits_8(cpld_base + 0x17, 0x40);
+	/* Disable MCKE isolation */
+	gpio_set_value(2, 0);
+	udelay(1);
+}
+#endif
+
 phys_size_t initdram(int board_type)
 {
 	phys_size_t dram_size;
@@ -150,5 +164,10 @@ phys_size_t initdram(int board_type)
 	/* DDR has been initialised by first stage boot loader */
 	dram_size =  fsl_ddr_sdram_size();
 #endif
+
+#if defined(CONFIG_DEEP_SLEEP) && !defined(CONFIG_SPL_BUILD)
+	fsl_dp_resume();
+#endif
+
 	return dram_size;
 }
diff --git a/board/freescale/t102xrdb/eth_t102xrdb.c b/board/freescale/t102xrdb/eth_t102xrdb.c
index 2e400c4ebf..f611ff07e9 100644
--- a/board/freescale/t102xrdb/eth_t102xrdb.c
+++ b/board/freescale/t102xrdb/eth_t102xrdb.c
@@ -21,6 +21,7 @@
 #include <phy.h>
 #include <asm/fsl_dtsec.h>
 #include <asm/fsl_serdes.h>
+#include "../common/fman.h"
 
 int board_eth_init(bd_t *bis)
 {
@@ -51,15 +52,22 @@ int board_eth_init(bd_t *bis)
 	/* Register the 10G MDIO bus */
 	fm_memac_mdio_init(bis, &tgec_mdio_info);
 
-	/* Set the two on-board RGMII PHY address */
-	fm_info_set_phy_address(FM1_DTSEC3, RGMII_PHY2_ADDR);
+	/* Set the on-board RGMII PHY address */
 	fm_info_set_phy_address(FM1_DTSEC4, RGMII_PHY1_ADDR);
 
 	switch (srds_s1) {
 	case 0x95:
-		/* 10G XFI with Aquantia PHY */
+		/* set the on-board RGMII2  PHY */
+		fm_info_set_phy_address(FM1_DTSEC3, RGMII_PHY2_ADDR);
+
+		/* set 10G XFI with Aquantia AQR105 PHY */
 		fm_info_set_phy_address(FM1_10GEC1, FM1_10GEC1_PHY_ADDR);
 		break;
+	case 0x77:
+	case 0x135:
+		/* set the on-board 2.5G SGMII AQR105 PHY */
+		fm_info_set_phy_address(FM1_DTSEC3, SGMII_PHY1_ADDR);
+		break;
 	default:
 		printf("SerDes protocol 0x%x is not supported on T102xRDB\n",
 		       srds_s1);
@@ -73,6 +81,10 @@ int board_eth_init(bd_t *bis)
 			dev = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME);
 			fm_info_set_mdio(i, dev);
 			break;
+		case PHY_INTERFACE_MODE_SGMII_2500:
+			dev = miiphy_get_dev_by_name(DEFAULT_FM_TGEC_MDIO_NAME);
+			fm_info_set_mdio(i, dev);
+			break;
 		default:
 			break;
 		}
@@ -95,6 +107,18 @@ int board_eth_init(bd_t *bis)
 	return pci_eth_init(bis);
 }
 
+void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr,
+			      enum fm_port port, int offset)
+{
+	if ((fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_SGMII_2500) &&
+	    (port == FM1_DTSEC3)) {
+		fdt_set_phy_handle(fdt, compat, addr, "sg_2500_aqr105_phy4");
+		fdt_setprop(fdt, offset, "phy-connection-type",
+			    "sgmii-2500", 10);
+		fdt_status_disabled_by_alias(fdt, "xg_aqr105_phy3");
+	}
+}
+
 void fdt_fixup_board_enet(void *fdt)
 {
 }
diff --git a/board/freescale/t102xrdb/spl.c b/board/freescale/t102xrdb/spl.c
index dd2dec4412..1a3a996439 100644
--- a/board/freescale/t102xrdb/spl.c
+++ b/board/freescale/t102xrdb/spl.c
@@ -11,6 +11,7 @@
 #include <mmc.h>
 #include <fsl_esdhc.h>
 #include <spi_flash.h>
+#include "../common/sleep.h"
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -42,6 +43,12 @@ void board_init_f(ulong bootflag)
 
 	console_init_f();
 
+#ifdef CONFIG_DEEP_SLEEP
+	/* disable the console if boot from deep sleep */
+	if (is_warm_boot())
+		fsl_dp_disable_console();
+#endif
+
 	/* initialize selected port with appropriate baud rate */
 	sys_clk = get_board_sys_clk();
 	plat_ratio = (in_be32(&gur->rcwsr[0]) >> 25) & 0x1f;
diff --git a/board/freescale/t102xrdb/t102xrdb.c b/board/freescale/t102xrdb/t102xrdb.c
index f5c438ded3..e196f12ac7 100644
--- a/board/freescale/t102xrdb/t102xrdb.c
+++ b/board/freescale/t102xrdb/t102xrdb.c
@@ -16,10 +16,10 @@
 #include <asm/fsl_serdes.h>
 #include <asm/fsl_portals.h>
 #include <asm/fsl_liodn.h>
-#include <asm/mpc85xx_gpio.h>
 #include <fm_eth.h>
 #include "t102xrdb.h"
 #include "cpld.h"
+#include "../common/sleep.h"
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -27,6 +27,11 @@ int checkboard(void)
 {
 	struct cpu_type *cpu = gd->arch.cpu;
 	static const char *freq[3] = {"100.00MHZ", "125.00MHz", "156.25MHZ"};
+	ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 srds_s1;
+
+	srds_s1 = in_be32(&gur->rcwsr[4]) & FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
+	srds_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
 
 	printf("Board: %sRDB, ", cpu->name);
 	printf("Board rev: 0x%02x CPLD ver: 0x%02x, boot from ",
@@ -50,7 +55,40 @@ int checkboard(void)
 #endif
 
 	puts("SERDES Reference Clocks:\n");
-	printf("SD1_CLK1=%s, SD1_CLK2=%s\n", freq[2], freq[0]);
+	if (srds_s1 == 0x95)
+		printf("SD1_CLK1=%s, SD1_CLK2=%s\n", freq[2], freq[0]);
+	else
+		printf("SD1_CLK1=%s, SD1_CLK2=%s\n", freq[0], freq[0]);
+
+	return 0;
+}
+
+static void board_mux_lane(void)
+{
+	ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 srds_prtcl_s1;
+	u8 reg = CPLD_READ(misc_ctl_status);
+
+	srds_prtcl_s1 = in_be32(&gur->rcwsr[4]) &
+				FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
+	srds_prtcl_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
+
+	if (srds_prtcl_s1 == 0x95) {
+		/* Route Lane B to PCIE */
+		CPLD_WRITE(misc_ctl_status, reg & ~CPLD_PCIE_SGMII_MUX);
+	} else {
+		/* Route Lane B to SGMII */
+		CPLD_WRITE(misc_ctl_status, reg | CPLD_PCIE_SGMII_MUX);
+	}
+	CPLD_WRITE(boot_override, CPLD_OVERRIDE_MUX_EN);
+}
+
+int board_early_init_f(void)
+{
+#if defined(CONFIG_DEEP_SLEEP)
+	if (is_warm_boot())
+		fsl_dp_disable_console();
+#endif
 
 	return 0;
 }
@@ -86,6 +124,7 @@ int board_early_init_r(void)
 #ifdef CONFIG_SYS_DPAA_QBMAN
 	setup_portals();
 #endif
+	board_mux_lane();
 
 	return 0;
 }
@@ -131,14 +170,3 @@ int ft_board_setup(void *blob, bd_t *bd)
 
 	return 0;
 }
-
-#ifdef CONFIG_DEEP_SLEEP
-void board_mem_sleep_setup(void)
-{
-	/* does not provide HW signals for power management */
-	CPLD_WRITE(misc_ctl_status, (CPLD_READ(misc_ctl_status) & ~0x40));
-	/* Disable MCKE isolation */
-	gpio_set_value(2, 0);
-	udelay(1);
-}
-#endif
diff --git a/board/freescale/t1040qds/ddr.c b/board/freescale/t1040qds/ddr.c
index 43f952f9c0..82402408a7 100644
--- a/board/freescale/t1040qds/ddr.c
+++ b/board/freescale/t1040qds/ddr.c
@@ -11,6 +11,7 @@
 #include <fsl_ddr_sdram.h>
 #include <fsl_ddr_dimm_params.h>
 #include <asm/fsl_law.h>
+#include <asm/mpc85xx_gpio.h>
 #include "ddr.h"
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -100,6 +101,19 @@ found:
 #endif
 }
 
+#if defined(CONFIG_DEEP_SLEEP)
+void board_mem_sleep_setup(void)
+{
+	void __iomem *qixis_base = (void *)QIXIS_BASE;
+
+	/* does not provide HW signals for power management */
+	clrbits_8(qixis_base + 0x21, 0x2);
+	/* Disable MCKE isolation */
+	gpio_set_value(2, 0);
+	udelay(1);
+}
+#endif
+
 phys_size_t initdram(int board_type)
 {
 	phys_size_t dram_size;
@@ -112,5 +126,10 @@ phys_size_t initdram(int board_type)
 	dram_size *= 0x100000;
 
 	puts("    DDR: ");
+
+#if defined(CONFIG_DEEP_SLEEP) && !defined(CONFIG_SPL_BUILD)
+	fsl_dp_resume();
+#endif
+
 	return dram_size;
 }
diff --git a/board/freescale/t1040qds/eth.c b/board/freescale/t1040qds/eth.c
index 06d908658d..8c8293426b 100644
--- a/board/freescale/t1040qds/eth.c
+++ b/board/freescale/t1040qds/eth.c
@@ -18,6 +18,7 @@
 #include <fsl_mdio.h>
 #include <malloc.h>
 #include <asm/fsl_dtsec.h>
+#include <vsc9953.h>
 
 #include "../common/fman.h"
 #include "../common/qixis.h"
@@ -216,6 +217,7 @@ static void initialize_lane_to_slot(void)
 		lane_to_slot[1] = 7;
 		lane_to_slot[2] = 7;
 		lane_to_slot[3] = 7;
+		lane_to_slot[6] = 7;
 		lane_to_slot[7] = 7;
 		break;
 	case 0x8d:
@@ -438,6 +440,12 @@ int board_eth_init(bd_t *bis)
 #ifdef CONFIG_FMAN_ENET
 	struct memac_mdio_info memac_mdio_info;
 	unsigned int i;
+#ifdef CONFIG_VSC9953
+	int lane;
+	int phy_addr;
+	phy_interface_t phy_int;
+	struct mii_dev *bus;
+#endif
 
 	printf("Initializing Fman\n");
 	set_brdcfg9_for_gtx_clk();
@@ -477,6 +485,7 @@ int board_eth_init(bd_t *bis)
 	for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
 		switch (fm_info_get_enet_if(i)) {
 		case PHY_INTERFACE_MODE_QSGMII:
+			fm_info_set_mdio(i, NULL);
 			break;
 		case PHY_INTERFACE_MODE_SGMII:
 			t1040_handle_phy_interface_sgmii(i);
@@ -491,6 +500,90 @@ int board_eth_init(bd_t *bis)
 		}
 	}
 
+#ifdef CONFIG_VSC9953
+	for (i = 0; i < VSC9953_MAX_PORTS; i++) {
+		lane = -1;
+		phy_addr = 0;
+		phy_int = PHY_INTERFACE_MODE_NONE;
+		switch (i) {
+		case 0:
+		case 1:
+		case 2:
+		case 3:
+			lane = serdes_get_first_lane(FSL_SRDS_1, QSGMII_SW1_A);
+			/* PHYs connected over QSGMII */
+			if (lane >= 0) {
+				phy_addr = CONFIG_SYS_FM1_QSGMII21_PHY_ADDR +
+						i;
+				phy_int = PHY_INTERFACE_MODE_QSGMII;
+				break;
+			}
+			lane = serdes_get_first_lane(FSL_SRDS_1,
+					SGMII_SW1_MAC1 + i);
+
+			if (lane < 0)
+				break;
+
+			/* PHYs connected over QSGMII */
+			if (i != 3 || lane_to_slot[lane] == 7)
+				phy_addr = CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR
+					+ i;
+			else
+				phy_addr = CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR;
+			phy_int = PHY_INTERFACE_MODE_SGMII;
+			break;
+		case 4:
+		case 5:
+		case 6:
+		case 7:
+			lane = serdes_get_first_lane(FSL_SRDS_1, QSGMII_SW1_B);
+			/* PHYs connected over QSGMII */
+			if (lane >= 0) {
+				phy_addr = CONFIG_SYS_FM1_QSGMII11_PHY_ADDR +
+						i - 4;
+				phy_int = PHY_INTERFACE_MODE_QSGMII;
+				break;
+			}
+			lane = serdes_get_first_lane(FSL_SRDS_1,
+					SGMII_SW1_MAC1 + i);
+			/* PHYs connected over SGMII */
+			if (lane >= 0) {
+				phy_addr = CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR
+						+ i - 3;
+				phy_int = PHY_INTERFACE_MODE_SGMII;
+			}
+			break;
+		case 8:
+			if (serdes_get_first_lane(FSL_SRDS_1,
+						  SGMII_FM1_DTSEC1) < 0)
+				/* FM1@DTSEC1 is connected to SW1@PORT8 */
+				vsc9953_port_enable(i);
+			break;
+		case 9:
+			if (serdes_get_first_lane(FSL_SRDS_1,
+						  SGMII_FM1_DTSEC2) < 0) {
+				/* Enable L2 On MAC2 using SCFG */
+				struct ccsr_scfg *scfg = (struct ccsr_scfg *)
+						CONFIG_SYS_MPC85xx_SCFG;
+
+				out_be32(&scfg->esgmiiselcr,
+					 in_be32(&scfg->esgmiiselcr) |
+					 (0x80000000));
+				vsc9953_port_enable(i);
+			}
+			break;
+		}
+
+		if (lane >= 0) {
+			bus = mii_dev_for_muxval(lane_to_slot[lane]);
+			vsc9953_port_info_set_mdio(i, bus);
+			vsc9953_port_enable(i);
+		}
+		vsc9953_port_info_set_phy_address(i, phy_addr);
+		vsc9953_port_info_set_phy_int(i, phy_int);
+	}
+
+#endif
 	cpu_eth_init(bis);
 #endif
 
diff --git a/board/freescale/t1040qds/t1040qds.c b/board/freescale/t1040qds/t1040qds.c
index 13285be42c..eaca57fc5d 100644
--- a/board/freescale/t1040qds/t1040qds.c
+++ b/board/freescale/t1040qds/t1040qds.c
@@ -19,8 +19,8 @@
 #include <asm/fsl_liodn.h>
 #include <fm_eth.h>
 #include <hwconfig.h>
-#include <asm/mpc85xx_gpio.h>
 
+#include "../common/sleep.h"
 #include "../common/qixis.h"
 #include "t1040qds.h"
 #include "t1040qds_qixis.h"
@@ -115,6 +115,16 @@ static void qe_board_setup(void)
 	}
 }
 
+int board_early_init_f(void)
+{
+#if defined(CONFIG_DEEP_SLEEP)
+	if (is_warm_boot())
+		fsl_dp_disable_console();
+#endif
+
+	return 0;
+}
+
 int board_early_init_r(void)
 {
 #ifdef CONFIG_SYS_FLASH_BASE
@@ -281,14 +291,3 @@ int board_need_mem_reset(void)
 {
 	return 1;
 }
-
-#ifdef CONFIG_DEEP_SLEEP
-void board_mem_sleep_setup(void)
-{
-	/* does not provide HW signals for power management */
-	QIXIS_WRITE(pwr_ctl[1], (QIXIS_READ(pwr_ctl[1]) & ~0x2));
-	/* Disable MCKE isolation */
-	gpio_set_value(2, 0);
-	udelay(1);
-}
-#endif
diff --git a/board/freescale/t104xrdb/MAINTAINERS b/board/freescale/t104xrdb/MAINTAINERS
index b61e1c0254..13d9be9da8 100644
--- a/board/freescale/t104xrdb/MAINTAINERS
+++ b/board/freescale/t104xrdb/MAINTAINERS
@@ -21,3 +21,4 @@ T1040RDB_SECURE_BOOT BOARD
 M:	Aneesh Bansal  <aneesh.bansal@freescale.com>
 S:	Maintained
 F:	configs/T1040RDB_SECURE_BOOT_defconfig
+F:	configs/T1042RDB_SECURE_BOOT_defconfig
diff --git a/board/freescale/t104xrdb/eth.c b/board/freescale/t104xrdb/eth.c
index c8b6c672a6..7581a4cdd4 100644
--- a/board/freescale/t104xrdb/eth.c
+++ b/board/freescale/t104xrdb/eth.c
@@ -6,11 +6,13 @@
 
 #include <common.h>
 #include <netdev.h>
+#include <asm/fsl_serdes.h>
 #include <asm/immap_85xx.h>
 #include <fm_eth.h>
 #include <fsl_mdio.h>
 #include <malloc.h>
 #include <asm/fsl_dtsec.h>
+#include <vsc9953.h>
 
 #include "../common/fman.h"
 
@@ -20,6 +22,11 @@ int board_eth_init(bd_t *bis)
 	struct memac_mdio_info memac_mdio_info;
 	unsigned int i;
 	int phy_addr = 0;
+#ifdef CONFIG_VSC9953
+	phy_interface_t phy_int;
+	struct mii_dev *bus;
+#endif
+
 	printf("Initializing Fman\n");
 
 	memac_mdio_info.regs =
@@ -72,10 +79,58 @@ int board_eth_init(bd_t *bis)
 			fm_info_set_phy_address(i, 0);
 			break;
 		}
-		fm_info_set_mdio(i,
-				 miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME));
+		if (fm_info_get_enet_if(i) == PHY_INTERFACE_MODE_QSGMII ||
+		    fm_info_get_enet_if(i) == PHY_INTERFACE_MODE_NONE)
+			fm_info_set_mdio(i, NULL);
+		else
+			fm_info_set_mdio(i,
+					 miiphy_get_dev_by_name(
+							DEFAULT_FM_MDIO_NAME));
+	}
+
+#ifdef CONFIG_VSC9953
+	/* SerDes configured for QSGMII */
+	if (serdes_get_first_lane(FSL_SRDS_1, QSGMII_SW1_A) >= 0) {
+		for (i = 0; i < 4; i++) {
+			bus = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME);
+			phy_addr = CONFIG_SYS_FM1_QSGMII11_PHY_ADDR + i;
+			phy_int = PHY_INTERFACE_MODE_QSGMII;
+
+			vsc9953_port_info_set_mdio(i, bus);
+			vsc9953_port_info_set_phy_address(i, phy_addr);
+			vsc9953_port_info_set_phy_int(i, phy_int);
+			vsc9953_port_enable(i);
+		}
+	}
+	if (serdes_get_first_lane(FSL_SRDS_1, QSGMII_SW1_B) >= 0) {
+		for (i = 4; i < 8; i++) {
+			bus = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME);
+			phy_addr = CONFIG_SYS_FM1_QSGMII21_PHY_ADDR + i - 4;
+			phy_int = PHY_INTERFACE_MODE_QSGMII;
+
+			vsc9953_port_info_set_mdio(i, bus);
+			vsc9953_port_info_set_phy_address(i, phy_addr);
+			vsc9953_port_info_set_phy_int(i, phy_int);
+			vsc9953_port_enable(i);
+		}
 	}
 
+	/* Connect DTSEC1 to L2 switch if it doesn't have a PHY */
+	if (serdes_get_first_lane(FSL_SRDS_1, SGMII_FM1_DTSEC1) < 0)
+		vsc9953_port_enable(8);
+
+	/* Connect DTSEC2 to L2 switch if it doesn't have a PHY */
+	if (serdes_get_first_lane(FSL_SRDS_1, SGMII_FM1_DTSEC2) < 0) {
+		/* Enable L2 On MAC2 using SCFG */
+		struct ccsr_scfg *scfg = (struct ccsr_scfg *)
+				CONFIG_SYS_MPC85xx_SCFG;
+
+		out_be32(&scfg->esgmiiselcr, in_be32(&scfg->esgmiiselcr) |
+			 (0x80000000));
+		vsc9953_port_enable(9);
+	}
+#endif
+
 	cpu_eth_init(bis);
 #endif
 
diff --git a/board/freescale/t4rdb/eth.c b/board/freescale/t4rdb/eth.c
index 142c6a877b..879bd1a347 100644
--- a/board/freescale/t4rdb/eth.c
+++ b/board/freescale/t4rdb/eth.c
@@ -101,7 +101,7 @@ int board_eth_init(bd_t *bis)
 	}
 
 #if (CONFIG_SYS_NUM_FMAN == 2)
-	if (srds_prtcl_s2 == 56) {
+	if ((srds_prtcl_s2 == 56) || (srds_prtcl_s2 == 55)) {
 		/* SGMII && XFI */
 		fm_info_set_phy_address(FM2_DTSEC1, SGMII_PHY_ADDR5);
 		fm_info_set_phy_address(FM2_DTSEC2, SGMII_PHY_ADDR6);
diff --git a/board/freescale/t4rdb/t4_rcw.cfg b/board/freescale/t4rdb/t4_rcw.cfg
index fdbbe5ef65..e46c7b25a5 100644
--- a/board/freescale/t4rdb/t4_rcw.cfg
+++ b/board/freescale/t4rdb/t4_rcw.cfg
@@ -1,7 +1,7 @@
 #PBL preamble and RCW header
 aa55aa55 010e0100
-#serdes protocol  27_56_1_9
+#serdes protocol  27_55_1_9
 16070019 18101916 00000000 00000000
-6c700848 00448c00 6c020000 f5000000
+6c6e0848 00448c00 6c020000 f5000000
 00000000 ee0000ee 00000000 000287fc
 00000000 50000000 00000000 00000028
diff --git a/board/google/chromebook_link/Kconfig b/board/google/chromebook_link/Kconfig
index 33a31f311f..ea454721c5 100644
--- a/board/google/chromebook_link/Kconfig
+++ b/board/google/chromebook_link/Kconfig
@@ -22,8 +22,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select MARK_GRAPHICS_MEM_WRCOMB
 	select BOARD_ROMSIZE_KB_8192
 
-config MMCONF_BASE_ADDRESS
-	hex
+config PCIE_ECAM_BASE
 	default 0xf0000000
 
 config EARLY_POST_CROS_EC
diff --git a/board/icecube/Kconfig b/board/icecube/Kconfig
deleted file mode 100644
index e5b2153911..0000000000
--- a/board/icecube/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-if TARGET_ICECUBE
-
-config SYS_BOARD
-	default "icecube"
-
-config SYS_CONFIG_NAME
-	default "IceCube"
-
-endif
diff --git a/board/icecube/MAINTAINERS b/board/icecube/MAINTAINERS
deleted file mode 100644
index 8a24eb4699..0000000000
--- a/board/icecube/MAINTAINERS
+++ /dev/null
@@ -1,21 +0,0 @@
-ICECUBE BOARD
-M:	Wolfgang Denk <wd@denx.de>
-S:	Maintained
-F:	board/icecube/
-F:	include/configs/IceCube.h
-F:	configs/icecube_5200_defconfig
-
-ICECUBE_5200_DDR BOARD
-#M:	-
-S:	Maintained
-F:	configs/icecube_5200_DDR_defconfig
-F:	configs/icecube_5200_DDR_LOWBOOT_defconfig
-F:	configs/icecube_5200_DDR_LOWBOOT08_defconfig
-F:	configs/icecube_5200_LOWBOOT_defconfig
-F:	configs/icecube_5200_LOWBOOT08_defconfig
-F:	configs/Lite5200_defconfig
-F:	configs/Lite5200_LOWBOOT_defconfig
-F:	configs/Lite5200_LOWBOOT08_defconfig
-F:	configs/lite5200b_defconfig
-F:	configs/lite5200b_LOWBOOT_defconfig
-F:	configs/lite5200b_PM_defconfig
diff --git a/board/icecube/Makefile b/board/icecube/Makefile
deleted file mode 100644
index c3c2cd1c3e..0000000000
--- a/board/icecube/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= icecube.o flash.o
diff --git a/board/icecube/README b/board/icecube/README
deleted file mode 100644
index 5252bc9767..0000000000
--- a/board/icecube/README
+++ /dev/null
@@ -1,13 +0,0 @@
----------------------------------------------------------------------------
-Build target                Flash address | BDI "go" command | Reset Vector
----------------------------------------------------------------------------
-Lite5200                     0xFFF00000   |    0xFFF00100    |   0xFFF00100
-Lite5200_LOWBOOT             0xFF000000   |    0xFF000100    |   0x00000100
-Lite5200_LOWBOOT08           0xFF800000   |    0xFF800100    |   0x00000100
-icecube_5200                 0xFFF00000   |    0xFFF00100    |   0xFFF00100
-icecube_5200_LOWBOOT         0xFF000000   |    0xFF000100    |   0x00000100
-icecube_5200_LOWBOOT08       0xFF800000   |    0xFF800100    |   0x00000100
-icecube_5200_DDR             0xFFF00000   |    0xFFF00100    |   0xFFF00100
-icecube_5200_DDR_LOWBOOT     0xFF800000   |    0xFF800100    |   0x00000100
-icecube_5200_DDR_LOWBOOT08   0xFF800000   |    0xFF800100    |   0x00000100
----------------------------------------------------------------------------
diff --git a/board/icecube/README.Lite5200B_low_power b/board/icecube/README.Lite5200B_low_power
deleted file mode 100644
index 5b04fbba72..0000000000
--- a/board/icecube/README.Lite5200B_low_power
+++ /dev/null
@@ -1,22 +0,0 @@
-Lite5200B wakeup from low-power mode (CONFIG_LITE5200B_PM)
-----------------------------------------------------------
-
-Low-power mode as described in Lite5200B User's Manual, means that
-with support of MC68HLC908QT1 microcontroller (refered to as QT),
-everything but the SDRAM can be powered down. This brings
-maximum power saving, while one can still restore previous state
-quickly.
-
-Quick overview where U-Boot comes into the picture:
-- OS saves device states
-- OS saves wakeup handler address to physical 0x0, puts SDRAM into
-  self-refresh and signals to QT, it should power down the board
-- / board is sleeping here /
-- someone presses SW4 (connected to QT)
-- U-Boot checks PSC2_4 pin, if QT drives it down, then we woke up,
-  so get SDRAM out of self-refresh and transfer control to OS
-  wakeup handler
-- OS restores device states
-
-This was tested on Linux with USB and Ethernet in use. Adding
-support for other devices is an OS issue.
diff --git a/board/icecube/flash.c b/board/icecube/flash.c
deleted file mode 100644
index a044e8f24a..0000000000
--- a/board/icecube/flash.c
+++ /dev/null
@@ -1,477 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-
-#ifndef CONFIG_FLASH_CFI_DRIVER
-flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
-
-/* NOTE - CONFIG_FLASH_16BIT means the CPU interface is 16-bit, it
- *        has nothing to do with the flash chip being 8-bit or 16-bit.
- */
-#ifdef CONFIG_FLASH_16BIT
-typedef unsigned short FLASH_PORT_WIDTH;
-typedef volatile unsigned short FLASH_PORT_WIDTHV;
-#define	FLASH_ID_MASK	0xFFFF
-#else
-typedef unsigned char FLASH_PORT_WIDTH;
-typedef volatile unsigned char FLASH_PORT_WIDTHV;
-#define	FLASH_ID_MASK	0xFF
-#endif
-
-#define FPW	FLASH_PORT_WIDTH
-#define FPWV	FLASH_PORT_WIDTHV
-
-#define ORMASK(size) ((-size) & OR_AM_MSK)
-
-#define FLASH_CYCLE1	0x0555
-#define FLASH_CYCLE2	0x02aa
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size(FPWV *addr, flash_info_t *info);
-static void flash_reset(flash_info_t *info);
-static int write_word_amd(flash_info_t *info, FPWV *dest, FPW data);
-static flash_info_t *flash_get_info(ulong base);
-
-/*-----------------------------------------------------------------------
- * flash_init()
- *
- * sets up flash_info and returns size of FLASH (bytes)
- */
-unsigned long flash_init (void)
-{
-	unsigned long size = 0;
-	int i;
-	extern void flash_preinit(void);
-	extern void flash_afterinit(ulong);
-	ulong flashbase = CONFIG_SYS_FLASH_BASE;
-
-	flash_preinit();
-
-	/* Init: no FLASHes known */
-	for (i=0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
-		memset(&flash_info[i], 0, sizeof(flash_info_t));
-
-		flash_info[i].size =
-			flash_get_size((FPW *)flashbase, &flash_info[i]);
-
-		size += flash_info[i].size;
-		flashbase += 0x800000;
-	}
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
-	/* monitor protection ON by default */
-	flash_protect(FLAG_PROTECT_SET,
-		      CONFIG_SYS_MONITOR_BASE,
-		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
-		      flash_get_info(CONFIG_SYS_MONITOR_BASE));
-#endif
-
-#ifdef	CONFIG_ENV_IS_IN_FLASH
-	/* ENV protection ON by default */
-	flash_protect(FLAG_PROTECT_SET,
-		      CONFIG_ENV_ADDR,
-		      CONFIG_ENV_ADDR+CONFIG_ENV_SIZE-1,
-		      flash_get_info(CONFIG_ENV_ADDR));
-#endif
-
-
-	flash_afterinit(size);
-	return size ? size : 1;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_reset(flash_info_t *info)
-{
-	FPWV *base = (FPWV *)(info->start[0]);
-
-	/* Put FLASH back in read mode */
-	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL)
-		*base = (FPW)0x00FF00FF;	/* Intel Read Mode */
-	else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD)
-		*base = (FPW)0x00F000F0;	/* AMD Read Mode */
-}
-
-/*-----------------------------------------------------------------------
- */
-
-static flash_info_t *flash_get_info(ulong base)
-{
-	int i;
-	flash_info_t * info;
-
-	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i ++) {
-		info = & flash_info[i];
-		if (info->size &&
-			info->start[0] <= base && base <= info->start[0] + info->size - 1)
-			break;
-	}
-
-	return i == CONFIG_SYS_MAX_FLASH_BANKS ? 0 : info;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-void flash_print_info (flash_info_t *info)
-{
-	int i;
-	uchar *boottype;
-	uchar *bootletter;
-	char *fmt;
-	uchar botbootletter[] = "B";
-	uchar topbootletter[] = "T";
-	uchar botboottype[] = "bottom boot sector";
-	uchar topboottype[] = "top boot sector";
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_AMD:	printf ("AMD ");		break;
-	case FLASH_MAN_BM:	printf ("BRIGHT MICRO ");	break;
-	case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break;
-	case FLASH_MAN_SST:	printf ("SST ");		break;
-	case FLASH_MAN_STM:	printf ("STM ");		break;
-	case FLASH_MAN_INTEL:	printf ("INTEL ");		break;
-	default:		printf ("Unknown Vendor ");	break;
-	}
-
-	/* check for top or bottom boot, if it applies */
-	if (info->flash_id & FLASH_BTYPE) {
-		boottype = botboottype;
-		bootletter = botbootletter;
-	}
-	else {
-		boottype = topboottype;
-		bootletter = topbootletter;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_AMDLV065D:
-		fmt = "29LV065 (64 Mbit, uniform sectors)\n";
-		break;
-	default:
-		fmt = "Unknown Chip Type\n";
-		break;
-	}
-
-	printf (fmt, bootletter, boottype);
-
-	printf ("  Size: %ld MB in %d Sectors\n",
-		info->size >> 20,
-		info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-
-	for (i=0; i<info->sector_count; ++i) {
-		if ((i % 5) == 0) {
-			printf ("\n   ");
-		}
-
-		printf (" %08lX%s", info->start[i],
-			info->protect[i] ? " (RO)" : "     ");
-	}
-
-	printf ("\n");
-}
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-ulong flash_get_size (FPWV *addr, flash_info_t *info)
-{
-	int i;
-	FPWV* addr2;
-
-	/* Write auto select command: read Manufacturer ID */
-	/* Write auto select command sequence and test FLASH answer */
-	addr[FLASH_CYCLE1] = (FPW)0x00AA00AA;	/* for AMD, Intel ignores this */
-	addr[FLASH_CYCLE2] = (FPW)0x00550055;	/* for AMD, Intel ignores this */
-	addr[FLASH_CYCLE1] = (FPW)0x00900090;	/* selects Intel or AMD */
-
-	/* The manufacturer codes are only 1 byte, so just use 1 byte.
-	 * This works for any bus width and any FLASH device width.
-	 */
-	udelay(100);
-	switch (addr[0] & 0xff) {
-
-	case (uchar)AMD_MANUFACT:
-		info->flash_id = FLASH_MAN_AMD;
-		break;
-
-	case (uchar)INTEL_MANUFACT:
-		info->flash_id = FLASH_MAN_INTEL;
-		break;
-
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		break;
-	}
-
-	/* Check 16 bits or 32 bits of ID so work on 32 or 16 bit bus. */
-	if (info->flash_id != FLASH_UNKNOWN) switch ((FPW)addr[1]) {
-
-	case (FPW)AMD_ID_LV065D:
-		info->flash_id += FLASH_AMDLV065D;
-		info->sector_count = 128;
-		info->size = 0x00800000;
-		for( i = 0; i < info->sector_count; i++ )
-			info->start[i] = (ulong)addr + (i * 0x10000);
-		break;				/* => 8 or 16 MB	*/
-
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		return (0);			/* => no or unknown flash */
-	}
-
-	/* test for real flash at bank 1 */
-	addr2 = (FPW *)((ulong)addr | 0x800000);
-	if (addr2 != addr &&
-		((addr2[0] & 0xff) == (addr[0] & 0xff)) && ((FPW)addr2[1] == (FPW)addr[1])) {
-		/* Seems 2 banks are the same space (8Mb chip is installed,
-		 * J24 in default position (CS0)). Disable this (first) bank.
-		 */
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-	}
-	/* Put FLASH back in read mode */
-	flash_reset(info);
-
-	return (info->size);
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int	flash_erase (flash_info_t *info, int s_first, int s_last)
-{
-	FPWV *addr;
-	int flag, prot, sect;
-	int intel = (info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL;
-	ulong start, now, last;
-	int rcode = 0;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf ("- missing\n");
-		} else {
-			printf ("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_AMDLV065D:
-		break;
-	case FLASH_UNKNOWN:
-	default:
-		printf ("Can't erase unknown flash type %08lx - aborted\n",
-			info->flash_id);
-		return 1;
-	}
-
-	prot = 0;
-	for (sect=s_first; sect<=s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n",
-			prot);
-	} else {
-		printf ("\n");
-	}
-
-	last  = get_timer(0);
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect<=s_last && rcode == 0; sect++) {
-
-		if (info->protect[sect] != 0)	/* protected, skip it */
-			continue;
-
-		/* Disable interrupts which might cause a timeout here */
-		flag = disable_interrupts();
-
-		addr = (FPWV *)(info->start[sect]);
-		if (intel) {
-			*addr = (FPW)0x00500050; /* clear status register */
-			*addr = (FPW)0x00200020; /* erase setup */
-			*addr = (FPW)0x00D000D0; /* erase confirm */
-		}
-		else {
-			/* must be AMD style if not Intel */
-			FPWV *base;		/* first address in bank */
-
-			base = (FPWV *)(info->start[0]);
-			base[FLASH_CYCLE1] = (FPW)0x00AA00AA;	/* unlock */
-			base[FLASH_CYCLE2] = (FPW)0x00550055;	/* unlock */
-			base[FLASH_CYCLE1] = (FPW)0x00800080;	/* erase mode */
-			base[FLASH_CYCLE1] = (FPW)0x00AA00AA;	/* unlock */
-			base[FLASH_CYCLE2] = (FPW)0x00550055;	/* unlock */
-			*addr = (FPW)0x00300030;	/* erase sector */
-		}
-
-		/* re-enable interrupts if necessary */
-		if (flag)
-			enable_interrupts();
-
-		start = get_timer(0);
-
-		/* wait at least 50us for AMD, 80us for Intel.
-		 * Let's wait 1 ms.
-		 */
-		udelay (1000);
-
-		while ((*addr & (FPW)0x00800080) != (FPW)0x00800080) {
-			if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-				printf ("Timeout\n");
-
-				if (intel) {
-					/* suspend erase	*/
-					*addr = (FPW)0x00B000B0;
-				}
-
-				flash_reset(info);	/* reset to read mode */
-				rcode = 1;		/* failed */
-				break;
-			}
-
-			/* show that we're waiting */
-			if ((get_timer(last)) > CONFIG_SYS_HZ) {/* every second */
-				putc ('.');
-				last = get_timer(0);
-			}
-		}
-
-		/* show that we're waiting */
-		if ((get_timer(last)) > CONFIG_SYS_HZ) {	/* every second */
-			putc ('.');
-			last = get_timer(0);
-		}
-
-		flash_reset(info);	/* reset to read mode	*/
-	}
-
-	printf (" done\n");
-	return rcode;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-	FPW data = 0; /* 16 or 32 bit word, matches flash bus width on MPC8XX */
-	int bytes;	  /* number of bytes to program in current word		*/
-	int left;	  /* number of bytes left to program			*/
-	int i, res;
-
-	for (left = cnt, res = 0;
-		 left > 0 && res == 0;
-		 addr += sizeof(data), left -= sizeof(data) - bytes) {
-
-		bytes = addr & (sizeof(data) - 1);
-		addr &= ~(sizeof(data) - 1);
-
-		/* combine source and destination data so can program
-		 * an entire word of 16 or 32 bits
-		 */
-		for (i = 0; i < sizeof(data); i++) {
-			data <<= 8;
-			if (i < bytes || i - bytes >= left )
-				data += *((uchar *)addr + i);
-			else
-				data += *src++;
-		}
-
-		/* write one word to the flash */
-		switch (info->flash_id & FLASH_VENDMASK) {
-		case FLASH_MAN_AMD:
-			res = write_word_amd(info, (FPWV *)addr, data);
-			break;
-		default:
-			/* unknown flash type, error! */
-			printf ("missing or unknown FLASH type\n");
-			res = 1;	/* not really a timeout, but gives error */
-			break;
-		}
-	}
-
-	return (res);
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash for AMD FLASH
- * A word is 16 or 32 bits, whichever the bus width of the flash bank
- * (not an individual chip) is.
- *
- * returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word_amd (flash_info_t *info, FPWV *dest, FPW data)
-{
-	ulong start;
-	int flag;
-	int res = 0;	/* result, assume success	*/
-	FPWV *base;		/* first address in flash bank	*/
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*dest & data) != data) {
-		return (2);
-	}
-
-
-	base = (FPWV *)(info->start[0]);
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	base[FLASH_CYCLE1] = (FPW)0x00AA00AA;	/* unlock */
-	base[FLASH_CYCLE2] = (FPW)0x00550055;	/* unlock */
-	base[FLASH_CYCLE1] = (FPW)0x00A000A0;	/* selects program mode */
-
-	*dest = data;		/* start programming the data	*/
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	start = get_timer (0);
-
-	/* data polling for D7 */
-	while (res == 0 && (*dest & (FPW)0x00800080) != (data & (FPW)0x00800080)) {
-		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-			*dest = (FPW)0x00F000F0;	/* reset bank */
-			res = 1;
-		}
-	}
-
-	return (res);
-}
-#endif /*CONFIG_FLASH_CFI_DRIVER*/
diff --git a/board/icecube/icecube.c b/board/icecube/icecube.c
deleted file mode 100644
index f0af24ad9b..0000000000
--- a/board/icecube/icecube.c
+++ /dev/null
@@ -1,326 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc5xxx.h>
-#include <pci.h>
-#include <asm/processor.h>
-#include <libfdt.h>
-#include <netdev.h>
-
-#if defined(CONFIG_LITE5200B)
-#include "mt46v32m16.h"
-#else
-# if defined(CONFIG_MPC5200_DDR)
-#  include "mt46v16m16-75.h"
-# else
-#include "mt48lc16m16a2-75.h"
-# endif
-#endif
-
-#ifdef CONFIG_LITE5200B_PM
-/* u-boot part of low-power mode implementation */
-#define SAVED_ADDR (*(void **)0x00000000)
-#define PSC2_4 0x02
-
-void lite5200b_wakeup(void)
-{
-	unsigned char wakeup_pin;
-	void (*linux_wakeup)(void);
-
-	/* check PSC2_4, if it's down "QT" is signaling we have a wakeup
-	 * from low power mode */
-	*(vu_char *)MPC5XXX_WU_GPIO_ENABLE = PSC2_4;
-	__asm__ volatile ("sync");
-
-	wakeup_pin = *(vu_char *)MPC5XXX_WU_GPIO_DATA_I;
-	if (wakeup_pin & PSC2_4)
-		return;
-
-	/* acknowledge to "QT"
-	 * by holding pin at 1 for 10 uS */
-	*(vu_char *)MPC5XXX_WU_GPIO_DIR = PSC2_4;
-	__asm__ volatile ("sync");
-	*(vu_char *)MPC5XXX_WU_GPIO_DATA_O = PSC2_4;
-	__asm__ volatile ("sync");
-	udelay(10);
-
-	/* put ram out of self-refresh */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL |= 0x80000000;	/* mode_en */
-	__asm__ volatile ("sync");
-	*(vu_long *)MPC5XXX_SDRAM_CTRL |= 0x50000000;	/* cke ref_en */
-	__asm__ volatile ("sync");
-	*(vu_long *)MPC5XXX_SDRAM_CTRL &= ~0x80000000;	/* !mode_en */
-	__asm__ volatile ("sync");
-	udelay(10); /* wait a bit */
-
-	/* jump back to linux kernel code */
-	linux_wakeup = SAVED_ADDR;
-	printf("\n\nLooks like we just woke, transferring control to 0x%08lx\n",
-			(unsigned long)linux_wakeup);
-	linux_wakeup();
-}
-#else
-#define lite5200b_wakeup()
-#endif
-
-#ifndef CONFIG_SYS_RAMBOOT
-static void sdram_start (int hi_addr)
-{
-	long hi_addr_bit = hi_addr ? 0x01000000 : 0;
-
-	/* unlock mode register */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | hi_addr_bit;
-	__asm__ volatile ("sync");
-
-	/* precharge all banks */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
-	__asm__ volatile ("sync");
-
-#if SDRAM_DDR
-	/* set mode register: extended mode */
-	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_EMODE;
-	__asm__ volatile ("sync");
-
-	/* set mode register: reset DLL */
-	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000;
-	__asm__ volatile ("sync");
-#endif
-
-	/* precharge all banks */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
-	__asm__ volatile ("sync");
-
-	/* auto refresh */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | hi_addr_bit;
-	__asm__ volatile ("sync");
-
-	/* set mode register */
-	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE;
-	__asm__ volatile ("sync");
-
-	/* normal operation */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
-	__asm__ volatile ("sync");
-}
-#endif
-
-/*
- * ATTENTION: Although partially referenced initdram does NOT make real use
- *            use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
- *            is something else than 0x00000000.
- */
-
-phys_size_t initdram (int board_type)
-{
-	ulong dramsize = 0;
-	ulong dramsize2 = 0;
-	uint svr, pvr;
-
-#ifndef CONFIG_SYS_RAMBOOT
-	ulong test1, test2;
-
-	/* setup SDRAM chip selects */
-	*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e;/* 2G at 0x0 */
-	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x80000000;/* disabled */
-	__asm__ volatile ("sync");
-
-	/* setup config registers */
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
-	__asm__ volatile ("sync");
-
-#if SDRAM_DDR
-	/* set tap delay */
-	*(vu_long *)MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY;
-	__asm__ volatile ("sync");
-#endif
-
-	/* find RAM size using SDRAM CS0 only */
-	sdram_start(0);
-	test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
-	sdram_start(1);
-	test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
-	if (test1 > test2) {
-		sdram_start(0);
-		dramsize = test1;
-	} else {
-		dramsize = test2;
-	}
-
-	/* memory smaller than 1MB is impossible */
-	if (dramsize < (1 << 20)) {
-		dramsize = 0;
-	}
-
-	/* set SDRAM CS0 size according to the amount of RAM found */
-	if (dramsize > 0) {
-		*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 + __builtin_ffs(dramsize >> 20) - 1;
-	} else {
-		*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
-	}
-
-	/* let SDRAM CS1 start right after CS0 */
-	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;/* 2G */
-
-	/* find RAM size using SDRAM CS1 only */
-	if (!dramsize)
-		sdram_start(0);
-	test2 = test1 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
-	if (!dramsize) {
-		sdram_start(1);
-		test2 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
-	}
-	if (test1 > test2) {
-		sdram_start(0);
-		dramsize2 = test1;
-	} else {
-		dramsize2 = test2;
-	}
-
-	/* memory smaller than 1MB is impossible */
-	if (dramsize2 < (1 << 20)) {
-		dramsize2 = 0;
-	}
-
-	/* set SDRAM CS1 size according to the amount of RAM found */
-	if (dramsize2 > 0) {
-		*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize
-			| (0x13 + __builtin_ffs(dramsize2 >> 20) - 1);
-	} else {
-		*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
-	}
-
-#else /* CONFIG_SYS_RAMBOOT */
-
-	/* retrieve size of memory connected to SDRAM CS0 */
-	dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
-	if (dramsize >= 0x13) {
-		dramsize = (1 << (dramsize - 0x13)) << 20;
-	} else {
-		dramsize = 0;
-	}
-
-	/* retrieve size of memory connected to SDRAM CS1 */
-	dramsize2 = *(vu_long *)MPC5XXX_SDRAM_CS1CFG & 0xFF;
-	if (dramsize2 >= 0x13) {
-		dramsize2 = (1 << (dramsize2 - 0x13)) << 20;
-	} else {
-		dramsize2 = 0;
-	}
-
-#endif /* CONFIG_SYS_RAMBOOT */
-
-	/*
-	 * On MPC5200B we need to set the special configuration delay in the
-	 * DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM
-	 * Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190:
-	 *
-	 * "The SDelay should be written to a value of 0x00000004. It is
-	 * required to account for changes caused by normal wafer processing
-	 * parameters."
-	 */
-	svr = get_svr();
-	pvr = get_pvr();
-	if ((SVR_MJREV(svr) >= 2) &&
-	    (PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4)) {
-
-		*(vu_long *)MPC5XXX_SDRAM_SDELAY = 0x04;
-		__asm__ volatile ("sync");
-	}
-
-	lite5200b_wakeup();
-
-	return dramsize + dramsize2;
-}
-
-int checkboard (void)
-{
-#if defined (CONFIG_LITE5200B)
-	puts ("Board: Freescale Lite5200B\n");
-#else
-	puts ("Board: Motorola MPC5200 (IceCube)\n");
-#endif
-	return 0;
-}
-
-void flash_preinit(void)
-{
-	/*
-	 * Now, when we are in RAM, enable flash write
-	 * access for detection process.
-	 * Note that CS_BOOT cannot be cleared when
-	 * executing in flash.
-	 */
-	*(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
-}
-
-void flash_afterinit(ulong size)
-{
-	if (size == 0x800000) { /* adjust mapping */
-		*(vu_long *)MPC5XXX_BOOTCS_START = *(vu_long *)MPC5XXX_CS0_START =
-			START_REG(CONFIG_SYS_BOOTCS_START | size);
-		*(vu_long *)MPC5XXX_BOOTCS_STOP = *(vu_long *)MPC5XXX_CS0_STOP =
-			STOP_REG(CONFIG_SYS_BOOTCS_START | size, size);
-	}
-}
-
-#ifdef	CONFIG_PCI
-static struct pci_controller hose;
-
-extern void pci_mpc5xxx_init(struct pci_controller *);
-
-void pci_init_board(void)
-{
-	pci_mpc5xxx_init(&hose);
-}
-#endif
-
-#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET)
-
-void init_ide_reset (void)
-{
-	debug ("init_ide_reset\n");
-
-	/* Configure PSC1_4 as GPIO output for ATA reset */
-	*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC1_4;
-	*(vu_long *) MPC5XXX_WU_GPIO_DIR    |= GPIO_PSC1_4;
-	/* Deassert reset */
-	*(vu_long *) MPC5XXX_WU_GPIO_DATA_O   |= GPIO_PSC1_4;
-}
-
-void ide_set_reset (int idereset)
-{
-	debug ("ide_reset(%d)\n", idereset);
-
-	if (idereset) {
-		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4;
-		/* Make a delay. MPC5200 spec says 25 usec min */
-		udelay(500000);
-	} else {
-		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |=  GPIO_PSC1_4;
-	}
-}
-#endif
-
-#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-int ft_board_setup(void *blob, bd_t *bd)
-{
-	ft_cpu_setup(blob, bd);
-
-	return 0;
-}
-#endif
-
-int board_eth_init(bd_t *bis)
-{
-	cpu_eth_init(bis); /* Built in FEC comes first */
-	return pci_eth_init(bis);
-}
diff --git a/board/icecube/mt46v16m16-75.h b/board/icecube/mt46v16m16-75.h
deleted file mode 100644
index 919876fd63..0000000000
--- a/board/icecube/mt46v16m16-75.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#define SDRAM_DDR	1		/* is DDR */
-
-/* Settings for XLB = 132 MHz */
-#define SDRAM_MODE	0x018D0000
-#define SDRAM_EMODE	0x40090000
-#define SDRAM_CONTROL	0x705f0f00
-#define SDRAM_CONFIG1	0x73722930
-#define SDRAM_CONFIG2	0x47770000
-#define SDRAM_TAPDELAY	0x10000000
diff --git a/board/icecube/mt46v32m16.h b/board/icecube/mt46v32m16.h
deleted file mode 100644
index a200bc78e8..0000000000
--- a/board/icecube/mt46v32m16.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#define SDRAM_DDR	1		/* is DDR */
-
-/* Settings for XLB = 132 MHz */
-#define SDRAM_MODE	0x018D0000
-#define SDRAM_EMODE	0x40090000
-#define SDRAM_CONTROL	0x704f0f00
-#define SDRAM_CONFIG1	0x73722930
-#define SDRAM_CONFIG2	0x47770000
-#define SDRAM_TAPDELAY	0x10000000
diff --git a/board/icecube/mt48lc16m16a2-75.h b/board/icecube/mt48lc16m16a2-75.h
deleted file mode 100644
index 0133eaa2ca..0000000000
--- a/board/icecube/mt48lc16m16a2-75.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#define SDRAM_DDR	0		/* is SDR */
-
-/* Settings for XLB = 132 MHz */
-#define SDRAM_MODE	0x00CD0000
-#define SDRAM_CONTROL	0x504F0000
-#define SDRAM_CONFIG1	0xD2322800
-#define SDRAM_CONFIG2	0x8AD70000
diff --git a/board/imgtec/malta/malta.c b/board/imgtec/malta/malta.c
index 78c4bd4efe..79562f79a8 100644
--- a/board/imgtec/malta/malta.c
+++ b/board/imgtec/malta/malta.c
@@ -6,6 +6,7 @@
  */
 
 #include <common.h>
+#include <ide.h>
 #include <netdev.h>
 #include <pci.h>
 #include <pci_gt64120.h>
@@ -123,6 +124,7 @@ void _machine_restart(void)
 
 	reset_base = (void __iomem *)CKSEG1ADDR(MALTA_RESET_BASE);
 	__raw_writel(GORESET, reset_base);
+	mdelay(1000);
 }
 
 int board_early_init_f(void)
@@ -217,4 +219,22 @@ void pci_init_board(void)
 	pci_read_config_byte(bdf, PCI_CFG_PIIX4_SERIRQC, &val8);
 	val8 |= PCI_CFG_PIIX4_SERIRQC_EN | PCI_CFG_PIIX4_SERIRQC_CONT;
 	pci_write_config_byte(bdf, PCI_CFG_PIIX4_SERIRQC, val8);
+
+	bdf = pci_find_device(PCI_VENDOR_ID_INTEL,
+			      PCI_DEVICE_ID_INTEL_82371AB, 0);
+	if (bdf == -1)
+		panic("Failed to find PIIX4 IDE controller\n");
+
+	/* enable bus master & IO access */
+	val32 |= PCI_COMMAND_MASTER | PCI_COMMAND_IO;
+	pci_write_config_dword(bdf, PCI_COMMAND, val32);
+
+	/* set latency */
+	pci_write_config_byte(bdf, PCI_LATENCY_TIMER, 0x40);
+
+	/* enable IDE/ATA */
+	pci_write_config_dword(bdf, PCI_CFG_PIIX4_IDETIM_PRI,
+			       PCI_CFG_PIIX4_IDETIM_IDE);
+	pci_write_config_dword(bdf, PCI_CFG_PIIX4_IDETIM_SEC,
+			       PCI_CFG_PIIX4_IDETIM_IDE);
 }
diff --git a/board/intel/galileo/Kconfig b/board/intel/galileo/Kconfig
new file mode 100644
index 0000000000..85afbbc8c5
--- /dev/null
+++ b/board/intel/galileo/Kconfig
@@ -0,0 +1,21 @@
+if TARGET_GALILEO
+
+config SYS_BOARD
+	default "galileo"
+
+config SYS_VENDOR
+	default "intel"
+
+config SYS_SOC
+	default "quark"
+
+config SYS_CONFIG_NAME
+	default "galileo"
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+	def_bool y
+	select X86_RESET_VECTOR
+	select INTEL_QUARK
+	select BOARD_ROMSIZE_KB_1024
+
+endif
diff --git a/board/intel/galileo/MAINTAINERS b/board/intel/galileo/MAINTAINERS
new file mode 100644
index 0000000000..dbbc82e8a1
--- /dev/null
+++ b/board/intel/galileo/MAINTAINERS
@@ -0,0 +1,6 @@
+INTEL GALILEO BOARD
+M:	Bin Meng <bmeng.cn@gmail.com>
+S:	Maintained
+F:	board/intel/galileo/
+F:	include/configs/galileo.h
+F:	configs/galileo_defconfig
diff --git a/board/intel/galileo/Makefile b/board/intel/galileo/Makefile
new file mode 100644
index 0000000000..8356df198c
--- /dev/null
+++ b/board/intel/galileo/Makefile
@@ -0,0 +1,7 @@
+#
+# Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y	+= galileo.o start.o
diff --git a/board/intel/galileo/galileo.c b/board/intel/galileo/galileo.c
new file mode 100644
index 0000000000..f2e74687ed
--- /dev/null
+++ b/board/intel/galileo/galileo.c
@@ -0,0 +1,19 @@
+/*
+ * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_early_init_f(void)
+{
+	return 0;
+}
+
+void setup_pch_gpios(u16 gpiobase, const struct pch_gpio_map *gpio)
+{
+	return;
+}
diff --git a/board/intel/galileo/start.S b/board/intel/galileo/start.S
new file mode 100644
index 0000000000..a71db69be9
--- /dev/null
+++ b/board/intel/galileo/start.S
@@ -0,0 +1,9 @@
+/*
+ * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+.globl early_board_init
+early_board_init:
+	jmp	early_board_init_ret
diff --git a/board/intel/minnowmax/Kconfig b/board/intel/minnowmax/Kconfig
new file mode 100644
index 0000000000..43c50a519b
--- /dev/null
+++ b/board/intel/minnowmax/Kconfig
@@ -0,0 +1,24 @@
+if TARGET_MINNOWMAX
+
+config SYS_BOARD
+	default "minnowmax"
+
+config SYS_VENDOR
+	default "intel"
+
+config SYS_SOC
+	default "baytrail"
+
+config SYS_CONFIG_NAME
+	default "minnowmax"
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+	def_bool y
+	select X86_RESET_VECTOR
+	select INTEL_BAYTRAIL
+	select BOARD_ROMSIZE_KB_8192
+
+config PCIE_ECAM_BASE
+	default 0xe0000000
+
+endif
diff --git a/board/intel/minnowmax/MAINTAINERS b/board/intel/minnowmax/MAINTAINERS
new file mode 100644
index 0000000000..d655761d57
--- /dev/null
+++ b/board/intel/minnowmax/MAINTAINERS
@@ -0,0 +1,6 @@
+CircuitCo Minnowboard Max
+M:	Simon Glass <sjg@chromium.org>
+S:	Maintained
+F:	board/intel/minnowmax
+F:	include/configs/minnowmax.h
+F:	configs/minnowmax_defconfig
diff --git a/board/intel/minnowmax/Makefile b/board/intel/minnowmax/Makefile
new file mode 100644
index 0000000000..1a614324a2
--- /dev/null
+++ b/board/intel/minnowmax/Makefile
@@ -0,0 +1,7 @@
+#
+# Copyright (C) 2015, Google, Inc
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y	+= minnowmax.o start.o
diff --git a/board/intel/minnowmax/minnowmax.c b/board/intel/minnowmax/minnowmax.c
new file mode 100644
index 0000000000..6e82b16335
--- /dev/null
+++ b/board/intel/minnowmax/minnowmax.c
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2015, Google, Inc
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/ibmpc.h>
+#include <asm/pnp_def.h>
+#include <netdev.h>
+#include <smsc_lpc47m.h>
+
+#define SERIAL_DEV PNP_DEV(0x2e, 4)
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_early_init_f(void)
+{
+	lpc47m_enable_serial(SERIAL_DEV, UART0_BASE);
+
+	return 0;
+}
+
+void setup_pch_gpios(u16 gpiobase, const struct pch_gpio_map *gpio)
+{
+	return;
+}
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
diff --git a/board/intel/minnowmax/start.S b/board/intel/minnowmax/start.S
new file mode 100644
index 0000000000..2c941a4a51
--- /dev/null
+++ b/board/intel/minnowmax/start.S
@@ -0,0 +1,9 @@
+/*
+ * Copyright (C) 2015, Google, Inc
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+.globl early_board_init
+early_board_init:
+	jmp	early_board_init_ret
diff --git a/board/iomega/iconnect/kwbimage.cfg b/board/iomega/iconnect/kwbimage.cfg
index 3c63a03d3f..f4260fa504 100644
--- a/board/iomega/iconnect/kwbimage.cfg
+++ b/board/iomega/iconnect/kwbimage.cfg
@@ -20,7 +20,7 @@ NAND_PAGE_SIZE	0x0800
 # Configure RGMII-0 interface pad voltage to 1.8V
 DATA 0xffd100e0 0x1b1b1b9b
 
-#Dram initalization for SINGLE x16 CL=5 @ 400MHz
+# Dram initalization for SINGLE x16 CL=5 @ 400MHz
 DATA 0xffd01400 0x43000c30	# DDR Configuration register
 # bit13-0:  0xc30, (3120 DDR2 clks refresh rate)
 # bit23-14: 0x0,
@@ -87,7 +87,7 @@ DATA 0xffd0141c 0x00000c52	# DDR Mode
 # bit6-4:   0x4, CL=5
 # bit7:     0x0, TestMode=0 normal
 # bit8:     0x0, DLL reset=0 normal
-# bit11-9:  0x6, auto-precharge write recovery ????????????
+# bit11-9:  0x6, auto-precharge write recovery
 # bit12:    0x0, PD must be zero
 # bit31-13: 0x0, required
 
diff --git a/board/isee/igep00x0/igep00x0.c b/board/isee/igep00x0/igep00x0.c
index 47522f8013..693fce741a 100644
--- a/board/isee/igep00x0/igep00x0.c
+++ b/board/isee/igep00x0/igep00x0.c
@@ -5,6 +5,7 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 #include <common.h>
+#include <status_led.h>
 #include <dm.h>
 #include <ns16550.h>
 #include <twl4030.h>
@@ -53,21 +54,12 @@ int board_init(void)
 	/* boot param addr */
 	gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
 
-	return 0;
-}
-
-#if defined(CONFIG_SHOW_BOOT_PROGRESS) && !defined(CONFIG_SPL_BUILD)
-void show_boot_progress(int val)
-{
-	if (val < 0) {
-		/* something went wrong */
-		return;
-	}
+#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
+	status_led_set(STATUS_LED_BOOT, STATUS_LED_ON);
+#endif
 
-	if (!gpio_request(IGEP00X0_GPIO_LED, ""))
-		gpio_direction_output(IGEP00X0_GPIO_LED, 1);
+	return 0;
 }
-#endif
 
 #ifdef CONFIG_SPL_BUILD
 /*
diff --git a/board/isee/igep00x0/igep00x0.h b/board/isee/igep00x0/igep00x0.h
index 181f81f2a1..3c7ff9b148 100644
--- a/board/isee/igep00x0/igep00x0.h
+++ b/board/isee/igep00x0/igep00x0.h
@@ -7,14 +7,6 @@
 #ifndef _IGEP00X0_H_
 #define _IGEP00X0_H_
 
-#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020)
-#define IGEP00X0_GPIO_LED 27
-#endif
-
-#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
-#define IGEP00X0_GPIO_LED 16
-#endif
-
 const omap3_sysinfo sysinfo = {
 	DDR_STACKED,
 #if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020)
diff --git a/board/maxbcm/binary.0 b/board/maxbcm/binary.0
deleted file mode 100644
index 17bfad99dc..0000000000
--- a/board/maxbcm/binary.0
+++ /dev/null
@@ -1,17 +0,0 @@
---------
-WARNING:
---------
-This file should contain the bin_hdr generated by the original Marvell
-U-Boot implementation. As this is currently not included in this
-U-Boot version, we have added this placeholder, so that the U-Boot
-image can be generated without errors.
-
-If you have a known to be working bin_hdr for your board, then you
-just need to replace this text file here with the binary header
-and recompile U-Boot.
-
-In a few weeks, mainline U-Boot will get support to generate the
-bin_hdr with the DDR training code itself. By implementing this code
-as SPL U-Boot. Then this file will not be needed any more and will
-get removed.
-
diff --git a/board/maxbcm/kwbimage.cfg b/board/maxbcm/kwbimage.cfg
index 5a3bc67c1c..cc05792556 100644
--- a/board/maxbcm/kwbimage.cfg
+++ b/board/maxbcm/kwbimage.cfg
@@ -9,4 +9,4 @@ VERSION		1
 BOOT_FROM	spi
 
 # Binary Header (bin_hdr) with DDR3 training code
-BINARY board/maxbcm/binary.0 0000005b 00000068
+BINARY spl/u-boot-spl.bin 0000005b 00000068
diff --git a/board/maxbcm/maxbcm.c b/board/maxbcm/maxbcm.c
index 7fc83ee820..46b16ac29c 100644
--- a/board/maxbcm/maxbcm.c
+++ b/board/maxbcm/maxbcm.c
@@ -11,6 +11,9 @@
 #include <asm/arch/soc.h>
 #include <linux/mbus.h>
 
+#include "../drivers/ddr/mvebu/ddr3_hw_training.h"
+#include "../arch/arm/mvebu-common/serdes/high_speed_env_spec.h"
+
 DECLARE_GLOBAL_DATA_PTR;
 
 /* Base addresses for the external device chip selects */
@@ -19,8 +22,84 @@ DECLARE_GLOBAL_DATA_PTR;
 #define DEV_CS2_BASE		0xe2000000
 #define DEV_CS3_BASE		0xe3000000
 
-/* Needed for dynamic (board-specific) mbus configuration */
-extern struct mvebu_mbus_state mbus_state;
+/* DDR3 static configuration */
+MV_DRAM_MC_INIT ddr3_b0_maxbcm[MV_MAX_DDR3_STATIC_SIZE] = {
+	{0x00001400, 0x7301CC30},	/* DDR SDRAM Configuration Register */
+	{0x00001404, 0x30000820},	/* Dunit Control Low Register */
+	{0x00001408, 0x5515BAAB},	/* DDR SDRAM Timing (Low) Register */
+	{0x0000140C, 0x38DA3F97},	/* DDR SDRAM Timing (High) Register */
+	{0x00001410, 0x20100005},	/* DDR SDRAM Address Control Register */
+	{0x00001414, 0x0000F3FF},	/* DDR SDRAM Open Pages Control Reg */
+	{0x00001418, 0x00000e00},	/* DDR SDRAM Operation Register */
+	{0x0000141C, 0x00000672},	/* DDR SDRAM Mode Register */
+	{0x00001420, 0x00000004},	/* DDR SDRAM Extended Mode Register */
+	{0x00001424, 0x0000F3FF},	/* Dunit Control High Register */
+	{0x00001428, 0x0011A940},	/* Dunit Control High Register */
+	{0x0000142C, 0x014C5134},	/* Dunit Control High Register */
+	{0x0000147C, 0x0000D771},
+
+	{0x00001494, 0x00010000},	/* DDR SDRAM ODT Control (Low) Reg */
+	{0x0000149C, 0x00000001},	/* DDR Dunit ODT Control Register */
+	{0x000014A0, 0x00000001},
+	{0x000014A8, 0x00000101},
+
+	/* Recommended Settings from Marvell for 4 x 16 bit devices: */
+	{0x000014C0, 0x192424C9},	/* DRAM addr and Ctrl Driving Strenght*/
+	{0x000014C4, 0xAAA24C9},	/* DRAM Data and DQS Driving Strenght */
+
+	/*
+	 * DO NOT Modify - Open Mbus Window - 2G - Mbus is required for the
+	 * training sequence
+	 */
+	{0x000200e8, 0x3FFF0E01},
+	{0x00020184, 0x3FFFFFE0},	/* Close fast path Window to - 2G */
+
+	{0x0001504, 0x3FFFFFE1},	/* CS0 Size */
+	{0x000150C, 0x00000000},	/* CS1 Size */
+	{0x0001514, 0x00000000},	/* CS2 Size */
+	{0x000151C, 0x00000000},	/* CS3 Size */
+
+	{0x0020220, 0x00000007},	/* Reserved */
+
+	{0x00001538, 0x0000000B},	/* Read Data Sample Delays Register */
+	{0x0000153C, 0x0000000B},	/* Read Data Ready Delay Register */
+
+	{0x000015D0, 0x00000670},	/* MR0 */
+	{0x000015D4, 0x00000044},	/* MR1 */
+	{0x000015D8, 0x00000018},	/* MR2 */
+	{0x000015DC, 0x00000000},	/* MR3 */
+	{0x000015E0, 0x00000001},
+	{0x000015E4, 0x00203c18},	/* ZQDS Configuration Register */
+	{0x000015EC, 0xF800A225},	/* DDR PHY */
+
+	{0x0, 0x0}
+};
+
+MV_DRAM_MODES maxbcm_ddr_modes[MV_DDR3_MODES_NUMBER] = {
+	{"maxbcm_1600-800", 0xB, 0x5, 0x0, A0, ddr3_b0_maxbcm,  NULL},
+};
+
+extern MV_SERDES_CHANGE_M_PHY serdes_change_m_phy[];
+
+/* MAXBCM: SERDES 0-4 PCIE, Serdes 7 = SGMII 0, all others =  unconnected */
+MV_BIN_SERDES_CFG maxbcm_serdes_cfg[] = {
+	{ MV_PEX_ROOT_COMPLEX, 0x20011111, 0x00000000,
+	  { PEX_BUS_MODE_X1, PEX_BUS_MODE_X1, PEX_BUS_DISABLED,
+	    PEX_BUS_DISABLED },
+	  0x1f, serdes_change_m_phy
+	}
+};
+
+MV_DRAM_MODES *ddr3_get_static_ddr_mode(void)
+{
+	/* Only one mode supported for this board */
+	return &maxbcm_ddr_modes[0];
+}
+
+MV_BIN_SERDES_CFG *board_serdes_cfg_get(u8 pex_mode)
+{
+	return &maxbcm_serdes_cfg[0];
+}
 
 int board_early_init_f(void)
 {
@@ -63,9 +142,7 @@ int checkboard(void)
 /* Configure and enable MV88E6185 switch */
 void reset_phy(void)
 {
-	u16 devadr = CONFIG_PHY_BASE_ADDR;
 	char *name = "neta0";
-	u16 reg;
 
 	if (miiphy_set_current_dev(name))
 		return;
diff --git a/board/nvidia/cardhu/cardhu.c b/board/nvidia/cardhu/cardhu.c
index 95c4ff2509..1540526a61 100644
--- a/board/nvidia/cardhu/cardhu.c
+++ b/board/nvidia/cardhu/cardhu.c
@@ -46,7 +46,7 @@ void board_sdmmc_voltage_init(void)
 	int ret;
 	int i;
 
-	ret = i2c_get_chip_for_busnum(0, PMU_I2C_ADDRESS, &dev);
+	ret = i2c_get_chip_for_busnum(0, PMU_I2C_ADDRESS, 1, &dev);
 	if (ret) {
 		debug("%s: Cannot find PMIC I2C chip\n", __func__);
 		return;
@@ -57,7 +57,7 @@ void board_sdmmc_voltage_init(void)
 	reg = 0x32;
 
 	for (i = 0; i < MAX_I2C_RETRY; ++i) {
-		if (i2c_write(dev, reg, data_buffer, 1))
+		if (dm_i2c_write(dev, reg, data_buffer, 1))
 			udelay(100);
 	}
 
@@ -66,7 +66,7 @@ void board_sdmmc_voltage_init(void)
 	reg = 0x67;
 
 	for (i = 0; i < MAX_I2C_RETRY; ++i) {
-		if (i2c_write(dev, reg, data_buffer, 1))
+		if (dm_i2c_write(dev, reg, data_buffer, 1))
 			udelay(100);
 	}
 }
@@ -94,7 +94,7 @@ int tegra_pcie_board_init(void)
 	u8 addr, data[1];
 	int err;
 
-	err = i2c_get_chip_for_busnum(0, PMU_I2C_ADDRESS, &dev);
+	err = i2c_get_chip_for_busnum(0, PMU_I2C_ADDRESS, 1, &dev);
 	if (err) {
 		debug("failed to find PMU bus\n");
 		return err;
@@ -104,7 +104,7 @@ int tegra_pcie_board_init(void)
 	data[0] = 0x15;
 	addr = 0x30;
 
-	err = i2c_write(dev, addr, data, 1);
+	err = dm_i2c_write(dev, addr, data, 1);
 	if (err) {
 		debug("failed to set VDD supply\n");
 		return err;
@@ -121,7 +121,7 @@ int tegra_pcie_board_init(void)
 	data[0] = 0x15;
 	addr = 0x31;
 
-	err = i2c_write(dev, addr, data, 1);
+	err = dm_i2c_write(dev, addr, data, 1);
 	if (err) {
 		debug("failed to set AVDD supply\n");
 		return err;
diff --git a/board/nvidia/dalmore/dalmore.c b/board/nvidia/dalmore/dalmore.c
index 2a737468dd..d7c1a695ff 100644
--- a/board/nvidia/dalmore/dalmore.c
+++ b/board/nvidia/dalmore/dalmore.c
@@ -55,7 +55,7 @@ void board_sdmmc_voltage_init(void)
 	uchar reg, data_buffer[1];
 	int ret;
 
-	ret = i2c_get_chip_for_busnum(0, PMU_I2C_ADDRESS, &dev);
+	ret = i2c_get_chip_for_busnum(0, PMU_I2C_ADDRESS, 1, &dev);
 	if (ret) {
 		debug("%s: Cannot find PMIC I2C chip\n", __func__);
 		return;
@@ -65,7 +65,7 @@ void board_sdmmc_voltage_init(void)
 	data_buffer[0] = 0x31;
 	reg = 0x61;
 
-	ret = i2c_write(dev, reg, data_buffer, 1);
+	ret = dm_i2c_write(dev, reg, data_buffer, 1);
 	if (ret)
 		printf("%s: PMU i2c_write %02X<-%02X returned %d\n",
 			__func__, reg, data_buffer[0], ret);
@@ -74,7 +74,7 @@ void board_sdmmc_voltage_init(void)
 	data_buffer[0] = 0x01;
 	reg = 0x60;
 
-	ret = i2c_write(dev, reg, data_buffer, 1);
+	ret = dm_i2c_write(dev, reg, data_buffer, 1);
 	if (ret)
 		printf("%s: PMU i2c_write %02X<-%02X returned %d\n",
 			__func__, reg, data_buffer[0], ret);
@@ -83,12 +83,12 @@ void board_sdmmc_voltage_init(void)
 	data_buffer[0] = 0x03;
 	reg = 0x14;
 
-	ret = i2c_get_chip_for_busnum(0, BAT_I2C_ADDRESS, &dev);
+	ret = i2c_get_chip_for_busnum(0, BAT_I2C_ADDRESS, 1, &dev);
 	if (ret) {
 		debug("%s: Cannot find charger I2C chip\n", __func__);
 		return;
 	}
-	ret = i2c_write(dev, reg, data_buffer, 1);
+	ret = dm_i2c_write(dev, reg, data_buffer, 1);
 	if (ret)
 		printf("%s: BAT i2c_write %02X<-%02X returned %d\n",
 			__func__, reg, data_buffer[0], ret);
diff --git a/board/nvidia/whistler/whistler.c b/board/nvidia/whistler/whistler.c
index 3114b20be0..3476f1159f 100644
--- a/board/nvidia/whistler/whistler.c
+++ b/board/nvidia/whistler/whistler.c
@@ -27,21 +27,21 @@ void pin_mux_mmc(void)
 	int ret;
 
 	/* Turn on MAX8907B LDO12 to 2.8V for J40 power */
-	ret = i2c_get_chip_for_busnum(0, 0x3c, &dev);
+	ret = i2c_get_chip_for_busnum(0, 0x3c, 1, &dev);
 	if (ret) {
 		printf("%s: Cannot find MAX8907B I2C chip\n", __func__);
 		return;
 	}
 	val = 0x29;
-	ret = i2c_write(dev, 0x46, &val, 1);
+	ret = dm_i2c_write(dev, 0x46, &val, 1);
 	if (ret)
 		printf("i2c_write 0 0x3c 0x46 failed: %d\n", ret);
 	val = 0x00;
-	ret = i2c_write(dev, 0x45, &val, 1);
+	ret = dm_i2c_write(dev, 0x45, &val, 1);
 	if (ret)
 		printf("i2c_write 0 0x3c 0x45 failed: %d\n", ret);
 	val = 0x1f;
-	ret = i2c_write(dev, 0x44, &val, 1);
+	ret = dm_i2c_write(dev, 0x44, &val, 1);
 	if (ret)
 		printf("i2c_write 0 0x3c 0x44 failed: %d\n", ret);
 
@@ -64,17 +64,17 @@ void pin_mux_usb(void)
 	 */
 
 	/* Turn on TAC6416's GPIO 0+1 for USB1/3's VBUS */
-	ret = i2c_get_chip_for_busnum(0, 0x20, &dev);
+	ret = i2c_get_chip_for_busnum(0, 0x20, 1, &dev);
 	if (ret) {
 		printf("%s: Cannot find TAC6416 I2C chip\n", __func__);
 		return;
 	}
 	val = 0x03;
-	ret = i2c_write(dev, 2, &val, 1);
+	ret = dm_i2c_write(dev, 2, &val, 1);
 	if (ret)
 		printf("i2c_write 0 0x20 2 failed: %d\n", ret);
 	val = 0xfc;
-	ret = i2c_write(dev, 6, &val, 1);
+	ret = dm_i2c_write(dev, 6, &val, 1);
 	if (ret)
 		printf("i2c_write 0 0x20 6 failed: %d\n", ret);
 }
diff --git a/board/pm520/Kconfig b/board/pm520/Kconfig
deleted file mode 100644
index 3f0a258a2b..0000000000
--- a/board/pm520/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-if TARGET_PM520
-
-config SYS_BOARD
-	default "pm520"
-
-config SYS_CONFIG_NAME
-	default "PM520"
-
-endif
diff --git a/board/pm520/MAINTAINERS b/board/pm520/MAINTAINERS
deleted file mode 100644
index 7b255bc81b..0000000000
--- a/board/pm520/MAINTAINERS
+++ /dev/null
@@ -1,9 +0,0 @@
-PM520 BOARD
-M:	Josef Wagner <Wagner@Microsys.de>
-S:	Maintained
-F:	board/pm520/
-F:	include/configs/PM520.h
-F:	configs/PM520_defconfig
-F:	configs/PM520_DDR_defconfig
-F:	configs/PM520_ROMBOOT_defconfig
-F:	configs/PM520_ROMBOOT_DDR_defconfig
diff --git a/board/pm520/Makefile b/board/pm520/Makefile
deleted file mode 100644
index 8b5a7eba71..0000000000
--- a/board/pm520/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= pm520.o flash.o
diff --git a/board/pm520/flash.c b/board/pm520/flash.c
deleted file mode 100644
index 89c9f02644..0000000000
--- a/board/pm520/flash.c
+++ /dev/null
@@ -1,659 +0,0 @@
-/*
- * (C) Copyright 2001
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2001-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <linux/byteorder/swab.h>
-
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips    */
-
-/* Board support for 1 or 2 flash devices */
-#define FLASH_PORT_WIDTH32
-#undef FLASH_PORT_WIDTH16
-
-#ifdef FLASH_PORT_WIDTH16
-#define FLASH_PORT_WIDTH	ushort
-#define FLASH_PORT_WIDTHV	vu_short
-#define SWAP(x)			(x)
-#else
-#define FLASH_PORT_WIDTH	ulong
-#define FLASH_PORT_WIDTHV	vu_long
-#define SWAP(x)			(x)
-#endif
-
-/* Intel-compatible flash ID */
-#define INTEL_COMPAT		0x00890089
-#define INTEL_ALT		0x00B000B0
-
-/* Intel-compatible flash commands */
-#define INTEL_PROGRAM		0x00100010
-#define INTEL_ERASE		0x00200020
-#define INTEL_CLEAR		0x00500050
-#define INTEL_LOCKBIT		0x00600060
-#define INTEL_PROTECT		0x00010001
-#define INTEL_STATUS		0x00700070
-#define INTEL_READID		0x00900090
-#define INTEL_CONFIRM		0x00D000D0
-#define INTEL_RESET		0xFFFFFFFF
-
-/* Intel-compatible flash status bits */
-#define INTEL_FINISHED		0x00800080
-#define INTEL_OK		0x00800080
-
-#define FPW	FLASH_PORT_WIDTH
-#define FPWV	FLASH_PORT_WIDTHV
-
-#define mb() __asm__ __volatile__ ("" : : : "memory")
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (FPW *addr, flash_info_t *info);
-static int write_data (flash_info_t *info, ulong dest, FPW data);
-static void flash_get_offsets (ulong base, flash_info_t *info);
-void inline spin_wheel (void);
-static void flash_sync_real_protect (flash_info_t * info);
-static unsigned char intel_sector_protected (flash_info_t *info, ushort sector);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
-	int i;
-	ulong size = 0;
-	extern void flash_preinit(void);
-	extern void flash_afterinit(ulong, ulong);
-	ulong flashbase = CONFIG_SYS_FLASH_BASE;
-
-	flash_preinit();
-
-	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
-		switch (i) {
-		case 0:
-			memset(&flash_info[i], 0, sizeof(flash_info_t));
-			flash_get_size ((FPW *) flashbase, &flash_info[i]);
-			flash_get_offsets (flash_info[i].start[0], &flash_info[i]);
-			break;
-		default:
-			panic ("configured to many flash banks!\n");
-			break;
-		}
-		size += flash_info[i].size;
-
-		/* get the h/w and s/w protection status in sync */
-		flash_sync_real_protect(&flash_info[i]);
-	}
-
-	/* Protect monitor and environment sectors
-	 */
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
-#ifndef CONFIG_BOOT_ROM
-	flash_protect ( FLAG_PROTECT_SET,
-			CONFIG_SYS_MONITOR_BASE,
-			CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
-			&flash_info[0] );
-#endif
-#endif
-
-#ifdef	CONFIG_ENV_IS_IN_FLASH
-	flash_protect ( FLAG_PROTECT_SET,
-			CONFIG_ENV_ADDR,
-			CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0] );
-#endif
-
-	flash_afterinit(flash_info[0].start[0], flash_info[0].size);
-
-	return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t *info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		return;
-	}
-
-	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
-		for (i = 0; i < info->sector_count; i++) {
-			info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE);
-		}
-	}
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t *info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_INTEL:
-		printf ("INTEL ");
-		break;
-	default:
-		printf ("Unknown Vendor ");
-		break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_28F256J3A:
-		printf ("28F256J3A\n");
-		break;
-
-	case FLASH_28F128J3A:
-		printf ("28F128J3A\n");
-		break;
-
-	case FLASH_28F640J3A:
-		printf ("28F640J3A\n");
-		break;
-
-	case FLASH_28F320J3A:
-		printf ("28F320J3A\n");
-		break;
-
-	default:
-		printf ("Unknown Chip Type\n");
-		break;
-	}
-
-	printf ("  Size: %ld MB in %d Sectors\n",
-			info->size >> 20, info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-	for (i = 0; i < info->sector_count; ++i) {
-		if ((i % 5) == 0)
-			printf ("\n   ");
-		printf (" %08lX%s",
-			info->start[i],
-			info->protect[i] ? " (RO)" : "     ");
-	}
-	printf ("\n");
-	return;
-}
-
-/*
- * The following code cannot be run from FLASH!
- */
-static ulong flash_get_size (FPW *addr, flash_info_t *info)
-{
-	volatile FPW value;
-
-	/* Write auto select command: read Manufacturer ID */
-	addr[0x5555] = (FPW) 0x00AA00AA;
-	addr[0x2AAA] = (FPW) 0x00550055;
-	addr[0x5555] = (FPW) 0x00900090;
-
-	mb ();
-	udelay(100);
-
-	value = addr[0];
-
-	switch (value) {
-
-	case (FPW) INTEL_MANUFACT:
-		info->flash_id = FLASH_MAN_INTEL;
-		break;
-
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		addr[0] = (FPW) 0x00FF00FF;	/* restore read mode */
-		return (0);			/* no or unknown flash  */
-	}
-
-	mb ();
-	value = addr[1];			/* device ID        */
-
-	switch (value) {
-
-	case (FPW) INTEL_ID_28F256J3A:
-		info->flash_id += FLASH_28F256J3A;
-		/* In U-Boot we support only 32 MB (no bank-switching) */
-		info->sector_count = 256 / 2;
-		info->size =  0x04000000 / 2;
-		info->start[0] = CONFIG_SYS_FLASH_BASE + 0x02000000;
-		break;				/* => 32 MB     */
-
-	case (FPW) INTEL_ID_28F128J3A:
-		info->flash_id += FLASH_28F128J3A;
-		info->sector_count = 128;
-		info->size = 0x02000000;
-		info->start[0] = CONFIG_SYS_FLASH_BASE + 0x02000000;
-		break;				/* => 32 MB     */
-
-	case (FPW) INTEL_ID_28F640J3A:
-		info->flash_id += FLASH_28F640J3A;
-		info->sector_count = 64;
-		info->size = 0x01000000;
-		info->start[0] = CONFIG_SYS_FLASH_BASE + 0x03000000;
-		break;				/* => 16 MB     */
-
-	case (FPW) INTEL_ID_28F320J3A:
-		info->flash_id += FLASH_28F320J3A;
-		info->sector_count = 32;
-		info->size = 0x800000;
-		info->start[0] = CONFIG_SYS_FLASH_BASE + 0x03800000;
-		break;				/* => 8 MB     */
-
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		break;
-	}
-
-	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
-		printf ("** ERROR: sector count %d > max (%d) **\n",
-			info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
-		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
-	}
-
-	addr[0] = (FPW) 0x00FF00FF;		/* restore read mode */
-
-	return (info->size);
-}
-
-
-/*
- * This function gets the u-boot flash sector protection status
- * (flash_info_t.protect[]) in sync with the sector protection
- * status stored in hardware.
- */
-static void flash_sync_real_protect (flash_info_t * info)
-{
-	int i;
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-
-	case FLASH_28F256J3A:
-	case FLASH_28F128J3A:
-	case FLASH_28F640J3A:
-	case FLASH_28F320J3A:
-		for (i = 0; i < info->sector_count; ++i) {
-			info->protect[i] = intel_sector_protected(info, i);
-		}
-		break;
-	default:
-		/* no h/w protect support */
-		break;
-	}
-}
-
-
-/*
- * checks if "sector" in bank "info" is protected. Should work on intel
- * strata flash chips 28FxxxJ3x in 8-bit mode.
- * Returns 1 if sector is protected (or timed-out while trying to read
- * protection status), 0 if it is not.
- */
-static unsigned char intel_sector_protected (flash_info_t *info, ushort sector)
-{
-	FPWV *addr;
-	FPWV *lock_conf_addr;
-	ulong start;
-	unsigned char ret;
-
-	/*
-	 * first, wait for the WSM to be finished. The rationale for
-	 * waiting for the WSM to become idle for at most
-	 * CONFIG_SYS_FLASH_ERASE_TOUT is as follows. The WSM can be busy
-	 * because of: (1) erase, (2) program or (3) lock bit
-	 * configuration. So we just wait for the longest timeout of
-	 * the (1)-(3), i.e. the erase timeout.
-	 */
-
-	/* wait at least 35ns (W12) before issuing Read Status Register */
-	udelay(1);
-	addr = (FPWV *) info->start[sector];
-	*addr = (FPW) INTEL_STATUS;
-
-	start = get_timer (0);
-	while ((*addr & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) {
-		if (get_timer (start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-			*addr = (FPW) INTEL_RESET; /* restore read mode */
-			printf("WSM busy too long, can't get prot status\n");
-			return 1;
-		}
-	}
-
-	/* issue the Read Identifier Codes command */
-	*addr = (FPW) INTEL_READID;
-
-	/* wait at least 35ns (W12) before reading */
-	udelay(1);
-
-	/* Intel example code uses offset of 2 for 16 bit flash */
-	lock_conf_addr = (FPWV *) info->start[sector] + 2;
-	ret = (*lock_conf_addr & (FPW) INTEL_PROTECT) ? 1 : 0;
-
-	/* put flash back in read mode */
-	*addr = (FPW) INTEL_RESET;
-
-	return ret;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t *info, int s_first, int s_last)
-{
-	int flag, prot, sect;
-	ulong type, start;
-	int rcode = 0;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf ("- missing\n");
-		} else {
-			printf ("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	type = (info->flash_id & FLASH_VENDMASK);
-	if ((type != FLASH_MAN_INTEL)) {
-		printf ("Can't erase unknown flash type %08lx - aborted\n",
-			info->flash_id);
-		return 1;
-	}
-
-	prot = 0;
-	for (sect = s_first; sect <= s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n",
-			prot);
-	} else {
-		printf ("\n");
-	}
-
-	start = get_timer (0);
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts ();
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect <= s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-			FPWV *addr = (FPWV *) (info->start[sect]);
-			FPW status;
-
-			printf ("Erasing sector %2d ... ", sect);
-
-			/* arm simple, non interrupt dependent timer */
-			start = get_timer(0);
-
-			*addr = (FPW) 0x00500050;	/* clear status register */
-			*addr = (FPW) 0x00200020;	/* erase setup */
-			*addr = (FPW) 0x00D000D0;	/* erase confirm */
-
-			while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-				if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-					printf ("Timeout\n");
-					*addr = (FPW) 0x00B000B0;	/* suspend erase     */
-					*addr = (FPW) 0x00FF00FF;	/* reset to read mode */
-					rcode = 1;
-					break;
-				}
-			}
-
-			*addr = 0x00500050;	/* clear status register cmd.   */
-			*addr = 0x00FF00FF;	/* resest to read mode          */
-
-			printf (" done\n");
-		}
-	}
-
-	if (flag)
-		enable_interrupts();
-
-	return rcode;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- * 4 - Flash not identified
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-	ulong cp, wp;
-	FPW data;
-	int count, i, l, rc, port_width;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		return 4;
-	}
-/* get lower word aligned address */
-#ifdef FLASH_PORT_WIDTH16
-	wp = (addr & ~1);
-	port_width = 2;
-#else
-	wp = (addr & ~3);
-	port_width = 4;
-#endif
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	if ((l = addr - wp) != 0) {
-		data = 0;
-		for (i = 0, cp = wp; i < l; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *) cp);
-		}
-		for (; i < port_width && cnt > 0; ++i) {
-			data = (data << 8) | *src++;
-			--cnt;
-			++cp;
-		}
-		for (; cnt == 0 && i < port_width; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *) cp);
-		}
-
-		if ((rc = write_data (info, wp, SWAP (data))) != 0) {
-			return (rc);
-		}
-		wp += port_width;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	count = 0;
-	while (cnt >= port_width) {
-		data = 0;
-		for (i = 0; i < port_width; ++i) {
-			data = (data << 8) | *src++;
-		}
-		if ((rc = write_data (info, wp, SWAP (data))) != 0) {
-			return (rc);
-		}
-		wp += port_width;
-		cnt -= port_width;
-		if (count++ > 0x800) {
-			spin_wheel ();
-			count = 0;
-		}
-	}
-
-	if (cnt == 0) {
-		return (0);
-	}
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
-		data = (data << 8) | *src++;
-		--cnt;
-	}
-	for (; i < port_width; ++i, ++cp) {
-		data = (data << 8) | (*(uchar *) cp);
-	}
-
-	return (write_data (info, wp, SWAP (data)));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word or halfword to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_data (flash_info_t *info, ulong dest, FPW data)
-{
-	FPWV *addr = (FPWV *) dest;
-	ulong status;
-	ulong start;
-	int flag;
-	int rcode = 0;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*addr & data) != data) {
-		printf ("not erased at %08lx (%lx)\n", (ulong) addr, *addr);
-		return (2);
-	}
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts ();
-
-	*addr = (FPW) 0x00400040;	/* write setup */
-	*addr = data;
-
-	/* arm simple, non interrupt dependent timer */
-	start = get_timer(0);
-
-	/* wait while polling the status register */
-	while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-			rcode = 1;
-			break;
-		}
-	}
-
-	*addr = (FPW) 0x00FF00FF;	/* restore read mode */
-
-	if (flag)
-		enable_interrupts();
-
-	return rcode;
-}
-
-void inline spin_wheel (void)
-{
-	static int p = 0;
-	static char w[] = "\\/-";
-
-	printf ("\010%c", w[p]);
-	(++p == 3) ? (p = 0) : 0;
-}
-
-/*-----------------------------------------------------------------------
- * Set/Clear sector's lock bit, returns:
- * 0 - OK
- * 1 - Error (timeout, voltage problems, etc.)
- */
-int flash_real_protect (flash_info_t *info, long sector, int prot)
-{
-	ulong start;
-	int i;
-	int rc = 0;
-	vu_long *addr = (vu_long *)(info->start[sector]);
-	int flag = disable_interrupts();
-
-	*addr = INTEL_CLEAR;	/* Clear status register */
-	if (prot) {			/* Set sector lock bit */
-		*addr = INTEL_LOCKBIT;	/* Sector lock bit */
-		*addr = INTEL_PROTECT;	/* set */
-	}
-	else {				/* Clear sector lock bit */
-		*addr = INTEL_LOCKBIT;	/* All sectors lock bits */
-		*addr = INTEL_CONFIRM;	/* clear */
-	}
-
-	start = get_timer(0);
-
-	while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) {
-		if (get_timer(start) > CONFIG_SYS_FLASH_UNLOCK_TOUT) {
-			printf("Flash lock bit operation timed out\n");
-			rc = 1;
-			break;
-		}
-	}
-
-	if (*addr != INTEL_OK) {
-		printf("Flash lock bit operation failed at %08X, CSR=%08X\n",
-		       (uint)addr, (uint)*addr);
-		rc = 1;
-	}
-
-	if (!rc)
-		info->protect[sector] = prot;
-
-	/*
-	 * Clear lock bit command clears all sectors lock bits, so
-	 * we have to restore lock bits of protected sectors.
-	 * WARNING: code below re-locks sectors only for one bank (info).
-	 * This causes problems on boards where several banks share
-	 * the same chip, as sectors in othere banks will be unlocked
-	 * but not re-locked. It works fine on pm520 though, as there
-	 * is only one chip and one bank.
-	 */
-	if (!prot)
-	{
-		for (i = 0; i < info->sector_count; i++)
-		{
-			if (info->protect[i])
-			{
-				start = get_timer(0);
-				addr = (vu_long *)(info->start[i]);
-				*addr = INTEL_LOCKBIT;	/* Sector lock bit */
-				*addr = INTEL_PROTECT;	/* set */
-				while ((*addr & INTEL_FINISHED) != INTEL_FINISHED)
-				{
-					if (get_timer(start) > CONFIG_SYS_FLASH_UNLOCK_TOUT)
-					{
-						printf("Flash lock bit operation timed out\n");
-						rc = 1;
-						break;
-					}
-				}
-			}
-		}
-		/*
-		 * get the s/w sector protection status in sync with the h/w,
-		 * in case something went wrong during the re-locking.
-		 */
-		flash_sync_real_protect(info); /* resets flash to read  mode */
-	}
-
-	if (flag)
-		enable_interrupts();
-
-	*addr = INTEL_RESET;		/* Reset to read array mode */
-
-	return rc;
-}
diff --git a/board/pm520/mt46v16m16-75.h b/board/pm520/mt46v16m16-75.h
deleted file mode 100644
index 9068fbf36f..0000000000
--- a/board/pm520/mt46v16m16-75.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#define SDRAM_DDR	1		/* is DDR */
-
-/* Settings for XLB = 132 MHz */
-#define SDRAM_MODE	0x018D0000
-#define SDRAM_EMODE	0x40090000
-#define SDRAM_CONTROL	0x714f0f00
-#define SDRAM_CONFIG1	0x73722930
-#define SDRAM_CONFIG2	0x47770000
-#define SDRAM_TAPDELAY	0x10000000
diff --git a/board/pm520/mt48lc16m16a2-75.h b/board/pm520/mt48lc16m16a2-75.h
deleted file mode 100644
index 0133eaa2ca..0000000000
--- a/board/pm520/mt48lc16m16a2-75.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#define SDRAM_DDR	0		/* is SDR */
-
-/* Settings for XLB = 132 MHz */
-#define SDRAM_MODE	0x00CD0000
-#define SDRAM_CONTROL	0x504F0000
-#define SDRAM_CONFIG1	0xD2322800
-#define SDRAM_CONFIG2	0x8AD70000
diff --git a/board/pm520/pm520.c b/board/pm520/pm520.c
deleted file mode 100644
index 4ec4505e8d..0000000000
--- a/board/pm520/pm520.c
+++ /dev/null
@@ -1,253 +0,0 @@
-/*
- * (C) Copyright 2003-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc5xxx.h>
-#include <pci.h>
-#include <netdev.h>
-
-#if defined(CONFIG_MPC5200_DDR)
-#include "mt46v16m16-75.h"
-#else
-#include "mt48lc16m16a2-75.h"
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifndef CONFIG_SYS_RAMBOOT
-static void sdram_start (int hi_addr)
-{
-	long hi_addr_bit = hi_addr ? 0x01000000 : 0;
-
-	/* unlock mode register */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | hi_addr_bit;
-	__asm__ volatile ("sync");
-
-	/* precharge all banks */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
-	__asm__ volatile ("sync");
-
-#if SDRAM_DDR
-	/* set mode register: extended mode */
-	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_EMODE;
-	__asm__ volatile ("sync");
-
-	/* set mode register: reset DLL */
-	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000;
-	__asm__ volatile ("sync");
-#endif
-
-	/* precharge all banks */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
-	__asm__ volatile ("sync");
-
-	/* auto refresh */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | hi_addr_bit;
-	__asm__ volatile ("sync");
-
-	/* set mode register */
-	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE;
-	__asm__ volatile ("sync");
-
-	/* normal operation */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
-	__asm__ volatile ("sync");
-}
-#endif
-
-/*
- * ATTENTION: Although partially referenced initdram does NOT make real use
- *            use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
- *            is something else than 0x00000000.
- */
-
-phys_size_t initdram (int board_type)
-{
-	ulong dramsize = 0;
-	ulong dramsize2 = 0;
-#ifndef CONFIG_SYS_RAMBOOT
-	ulong test1, test2;
-
-	/* setup SDRAM chip selects */
-	*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e;/* 2G at 0x0 */
-	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x80000000;/* disabled */
-	__asm__ volatile ("sync");
-
-	/* setup config registers */
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
-	__asm__ volatile ("sync");
-
-#if SDRAM_DDR
-	/* set tap delay */
-	*(vu_long *)MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY;
-	__asm__ volatile ("sync");
-#endif
-
-	/* find RAM size using SDRAM CS0 only */
-	sdram_start(0);
-	test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
-	sdram_start(1);
-	test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
-	if (test1 > test2) {
-		sdram_start(0);
-		dramsize = test1;
-	} else {
-		dramsize = test2;
-	}
-
-	/* memory smaller than 1MB is impossible */
-	if (dramsize < (1 << 20)) {
-		dramsize = 0;
-	}
-
-	/* set SDRAM CS0 size according to the amount of RAM found */
-	if (dramsize > 0) {
-		*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 + __builtin_ffs(dramsize >> 20) - 1;
-	} else {
-		*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
-	}
-
-	/* let SDRAM CS1 start right after CS0 */
-	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;/* 2G */
-
-	/* find RAM size using SDRAM CS1 only */
-	if (!dramsize)
-		sdram_start(0);
-	test2 = test1 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
-	if (!dramsize) {
-		sdram_start(1);
-		test2 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
-	}
-	if (test1 > test2) {
-		sdram_start(0);
-		dramsize2 = test1;
-	} else {
-		dramsize2 = test2;
-	}
-
-	/* memory smaller than 1MB is impossible */
-	if (dramsize2 < (1 << 20)) {
-		dramsize2 = 0;
-	}
-
-	/* set SDRAM CS1 size according to the amount of RAM found */
-	if (dramsize2 > 0) {
-		*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize
-			| (0x13 + __builtin_ffs(dramsize2 >> 20) - 1);
-	} else {
-		*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
-	}
-
-#else /* CONFIG_SYS_RAMBOOT */
-
-	/* retrieve size of memory connected to SDRAM CS0 */
-	dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
-	if (dramsize >= 0x13) {
-		dramsize = (1 << (dramsize - 0x13)) << 20;
-	} else {
-		dramsize = 0;
-	}
-
-	/* retrieve size of memory connected to SDRAM CS1 */
-	dramsize2 = *(vu_long *)MPC5XXX_SDRAM_CS1CFG & 0xFF;
-	if (dramsize2 >= 0x13) {
-		dramsize2 = (1 << (dramsize2 - 0x13)) << 20;
-	} else {
-		dramsize2 = 0;
-	}
-
-#endif /* CONFIG_SYS_RAMBOOT */
-
-	return dramsize + dramsize2;
-}
-
-int checkboard (void)
-{
-	puts ("Board: MicroSys PM520 \n");
-	return 0;
-}
-
-void flash_preinit(void)
-{
-	/*
-	 * Now, when we are in RAM, enable flash write
-	 * access for detection process.
-	 * Note that CS_BOOT cannot be cleared when
-	 * executing in flash.
-	 */
-	*(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
-}
-
-void flash_afterinit(ulong start, ulong size)
-{
-#if defined(CONFIG_BOOT_ROM)
-	/* adjust mapping */
-	*(vu_long *)MPC5XXX_CS1_START =
-			START_REG(start);
-	*(vu_long *)MPC5XXX_CS1_STOP =
-			STOP_REG(start, size);
-#else
-	/* adjust mapping */
-	*(vu_long *)MPC5XXX_BOOTCS_START = *(vu_long *)MPC5XXX_CS0_START =
-			START_REG(start);
-	*(vu_long *)MPC5XXX_BOOTCS_STOP = *(vu_long *)MPC5XXX_CS0_STOP =
-			STOP_REG(start, size);
-#endif
-}
-
-
-extern flash_info_t flash_info[];	/* info for FLASH chips */
-
-int misc_init_r (void)
-{
-	/* adjust flash start */
-	gd->bd->bi_flashstart = flash_info[0].start[0];
-	return (0);
-}
-
-#ifdef	CONFIG_PCI
-static struct pci_controller hose;
-
-extern void pci_mpc5xxx_init(struct pci_controller *);
-
-void pci_init_board(void)
-{
-	pci_mpc5xxx_init(&hose);
-}
-#endif
-
-#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET)
-
-void init_ide_reset (void)
-{
-	debug ("init_ide_reset\n");
-
-}
-
-void ide_set_reset (int idereset)
-{
-	debug ("ide_reset(%d)\n", idereset);
-
-}
-#endif
-
-#if defined(CONFIG_CMD_DOC)
-void doc_init (void)
-{
-	doc_probe (CONFIG_SYS_DOC_BASE);
-}
-#endif
-
-int board_eth_init(bd_t *bis)
-{
-	cpu_eth_init(bis); /* Built in FEC comes first */
-	return pci_eth_init(bis);
-}
diff --git a/board/raidsonic/ib62x0/kwbimage.cfg b/board/raidsonic/ib62x0/kwbimage.cfg
index 596071f9b3..ec00c15af3 100644
--- a/board/raidsonic/ib62x0/kwbimage.cfg
+++ b/board/raidsonic/ib62x0/kwbimage.cfg
@@ -11,7 +11,7 @@
 #
 
 # Boot Media configurations
-BOOT_FROM	nand	# change from nand to uart if building UART image
+BOOT_FROM	nand
 NAND_ECC_MODE	default
 NAND_PAGE_SIZE	0x0800
 
@@ -21,12 +21,12 @@ NAND_PAGE_SIZE	0x0800
 # Configure RGMII-0 interface pad voltage to 1.8V
 DATA 0xffd100e0 0x1b1b1b9b
 
-#Dram initalization for SINGLE x16 CL=5 @ 400MHz
+# Dram initalization for SINGLE x16 CL=5 @ 400MHz
 DATA 0xffd01400 0x43000c30	# DDR Configuration register
 # bit13-0:  0xc30, (3120 DDR2 clks refresh rate)
 # bit23-14: 0x0,
-# bit24:    0x1,     enable exit self refresh mode on DDR access
-# bit25:    0x1,     required
+# bit24:    0x1,   enable exit self refresh mode on DDR access
+# bit25:    0x1,   required
 # bit29-26: 0x0,
 # bit31-30: 0x1,
 
@@ -64,10 +64,10 @@ DATA 0xffd01410 0x0000000c	# DDR Address Control
 # bit3-2:   11,  Cs0size (1Gb)
 # bit5-4:   00,  Cs1width (x8)
 # bit7-6:   11,  Cs1size (1Gb)
-# bit9-8:   00,  Cs2width (nonexistent
-# bit11-10: 00,  Cs2size  (nonexistent
-# bit13-12: 00,  Cs3width (nonexistent
-# bit15-14: 00,  Cs3size  (nonexistent
+# bit9-8:   00,  Cs2width (nonexistent)
+# bit11-10: 00,  Cs2size (nonexistent)
+# bit13-12: 00,  Cs3width (nonexistent)
+# bit15-14: 00,  Cs3size (nonexistent)
 # bit16:    0,   Cs0AddrSel
 # bit17:    0,   Cs1AddrSel
 # bit18:    0,   Cs2AddrSel
@@ -88,7 +88,7 @@ DATA 0xffd0141c 0x00000c52	# DDR Mode
 # bit6-4:   0x4, CL=5
 # bit7:     0x0, TestMode=0 normal
 # bit8:     0x0, DLL reset=0 normal
-# bit11-9:  0x6, auto-precharge write recovery ????????????
+# bit11-9:  0x6, auto-precharge write recovery
 # bit12:    0x0, PD must be zero
 # bit31-13: 0x0, required
 
@@ -148,8 +148,8 @@ DATA 0xffd0149c 0x0000e803	# CPU ODT Control
 DATA 0xffd01480 0x00000001	# DDR Initialization Control
 # bit0: 0x1, enable DDR init upon this register write
 
-DATA 0xFFD20134 0x66666666      # L2 RAM Timing 0 Register
-DATA 0xFFD20138 0x66666666      # L2 RAM Timing 1 Register
+DATA 0xffd20134 0x66666666	# L2 RAM Timing 0 Register
+DATA 0xffd20138 0x66666666	# L2 RAM Timing 1 Register
 
 # End of Header extension
 DATA 0x0 0x0
diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c
index c18271fce8..948078b958 100644
--- a/board/raspberrypi/rpi/rpi.c
+++ b/board/raspberrypi/rpi/rpi.c
@@ -18,6 +18,7 @@
 #include <config.h>
 #include <dm.h>
 #include <fdt_support.h>
+#include <fdt_simplefb.h>
 #include <lcd.h>
 #include <mmc.h>
 #include <asm/gpio.h>
diff --git a/board/samsung/odroid/odroid.c b/board/samsung/odroid/odroid.c
index b7d23817e1..e3517f2eb2 100644
--- a/board/samsung/odroid/odroid.c
+++ b/board/samsung/odroid/odroid.c
@@ -415,15 +415,6 @@ static int pmic_init_max77686(void)
 	return 0;
 }
 
-#ifdef CONFIG_SYS_I2C_INIT_BOARD
-static void board_init_i2c(void)
-{
-	/* I2C_0 */
-	if (exynos_pinmux_config(PERIPH_ID_I2C0, PINMUX_FLAG_NONE))
-		debug("I2C%d not configured\n", (I2C_0));
-}
-#endif
-
 int exynos_early_init_f(void)
 {
 	board_clock_init();
@@ -444,10 +435,7 @@ int exynos_init(void)
 
 int exynos_power_init(void)
 {
-#ifdef CONFIG_SYS_I2C_INIT_BOARD
-	board_init_i2c();
-#endif
-	pmic_init(I2C_0);
+	pmic_init(0);
 	pmic_init_max77686();
 
 	return 0;
diff --git a/board/sandbox/README.sandbox b/board/sandbox/README.sandbox
index 5f879f5506..3c0df17845 100644
--- a/board/sandbox/README.sandbox
+++ b/board/sandbox/README.sandbox
@@ -18,8 +18,8 @@ create unit tests which we can run to test this upper level code.
 
 CONFIG_SANDBOX is defined when building a native board.
 
-The chosen vendor and board names are also 'sandbox', so there is a single
-board in board/sandbox.
+The board name is 'sandbox' but the vendor name is unset, so there is a
+single board in board/sandbox.
 
 CONFIG_SANDBOX_BIG_ENDIAN should be defined when running on big-endian
 machines.
diff --git a/board/siemens/corvus/board.c b/board/siemens/corvus/board.c
index 0a11540cca..f3f6dae459 100644
--- a/board/siemens/corvus/board.c
+++ b/board/siemens/corvus/board.c
@@ -43,13 +43,13 @@ static void corvus_nand_hw_init(void)
 	writel(csa, &matrix->ebicsa);
 
 	/* Configure SMC CS3 for NAND/SmartMedia */
-	writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) |
-	       AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0),
+	writel(AT91_SMC_SETUP_NWE(2) | AT91_SMC_SETUP_NCS_WR(0) |
+	       AT91_SMC_SETUP_NRD(2) | AT91_SMC_SETUP_NCS_RD(0),
 	       &smc->cs[3].setup);
-	writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(3) |
-	       AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(2),
+	writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(4) |
+	       AT91_SMC_PULSE_NRD(4) | AT91_SMC_PULSE_NCS_RD(4),
 	       &smc->cs[3].pulse);
-	writel(AT91_SMC_CYCLE_NWE(7) | AT91_SMC_CYCLE_NRD(4),
+	writel(AT91_SMC_CYCLE_NWE(7) | AT91_SMC_CYCLE_NRD(7),
 	       &smc->cs[3].cycle);
 	writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
 	       AT91_SMC_MODE_EXNW_DISABLE |
@@ -62,9 +62,11 @@ static void corvus_nand_hw_init(void)
 	       &smc->cs[3].mode);
 
 	at91_periph_clk_enable(ATMEL_ID_PIOC);
+	at91_periph_clk_enable(ATMEL_ID_PIOA);
 
 	/* Enable NandFlash */
 	at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+	at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
 }
 
 #if defined(CONFIG_SPL_BUILD)
diff --git a/board/siemens/taurus/taurus.c b/board/siemens/taurus/taurus.c
index b8ff478110..013dac2e2f 100644
--- a/board/siemens/taurus/taurus.c
+++ b/board/siemens/taurus/taurus.c
@@ -68,6 +68,7 @@ static void taurus_nand_hw_init(void)
 #if defined(CONFIG_SPL_BUILD)
 #include <spl.h>
 #include <nand.h>
+#include <spi_flash.h>
 
 void matrix_init(void)
 {
@@ -81,23 +82,28 @@ void matrix_init(void)
 void at91_spl_board_init(void)
 {
 	taurus_nand_hw_init();
+	at91_spi0_hw_init(TAURUS_SPI_MASK);
 
 	/* Configure recovery button PINs */
 	at91_set_gpio_input(AT91_PIN_PA31, 1);
 
 	/* check if button is pressed */
 	if (at91_get_gpio_value(AT91_PIN_PA31) == 0) {
-		u32 boot_device;
+		struct spi_flash *flash;
 
 		debug("Recovery button pressed\n");
-		boot_device = spl_boot_device();
-		switch (boot_device) {
-#ifdef CONFIG_SPL_NAND_SUPPORT
-		case BOOT_DEVICE_NAND:
-			nand_init();
-			spl_nand_erase_one(0, 0);
-			break;
-#endif
+		nand_init();
+		spl_nand_erase_one(0, 0);
+		flash = spi_flash_probe(CONFIG_SF_DEFAULT_BUS,
+					0,
+					CONFIG_SF_DEFAULT_SPEED,
+					SPI_MODE_3);
+		if (!flash) {
+			puts("no flash\n");
+		} else {
+			puts("erase spi flash sector 0\n");
+			spi_flash_erase(flash, 0,
+					CONFIG_SYS_NAND_U_BOOT_SIZE);
 		}
 	}
 }
diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index 6a4d764b7c..4a2158988f 100644
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -33,21 +33,103 @@ config MACH_SUN8I
 
 endchoice
 
-if MACH_SUN6I || MACH_SUN8I
-
 config DRAM_CLK
-	int "sun6i dram clock speed"
-	default 312
+	int "sunxi dram clock speed"
+	default 312 if MACH_SUN6I || MACH_SUN8I
+	default 360 if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
 	---help---
 	Set the dram clock speed, valid range 240 - 480, must be a multiple
 	of 24.
 
+if MACH_SUN5I || MACH_SUN7I
+config DRAM_MBUS_CLK
+	int "sunxi mbus clock speed"
+	default 300
+	---help---
+	Set the mbus clock speed. The maximum on sun5i hardware is 300MHz.
+
+endif
+
 config DRAM_ZQ
-	int "sun6i dram zq value"
-	default 123
+	int "sunxi dram zq value"
+	default 123 if MACH_SUN4I || MACH_SUN5I || MACH_SUN6I || MACH_SUN8I
+	default 127 if MACH_SUN7I
 	---help---
 	Set the dram zq value.
 
+if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
+config DRAM_EMR1
+	int "sunxi dram emr1 value"
+	default 0 if MACH_SUN4I
+	default 4 if MACH_SUN5I || MACH_SUN7I
+	---help---
+	Set the dram controller emr1 value.
+
+config DRAM_ODT_EN
+	int "sunxi dram odt_en value"
+	default 0
+	---help---
+	Set the dram controller odt_en parameter. This can be used to
+	enable/disable the ODT feature.
+
+config DRAM_TPR3
+	hex "sunxi dram tpr3 value"
+	default 0
+	---help---
+	Set the dram controller tpr3 parameter. This parameter configures
+	the delay on the command lane and also phase shifts, which are
+	applied for sampling incoming read data. The default value 0
+	means that no phase/delay adjustments are necessary. Properly
+	configuring this parameter increases reliability at high DRAM
+	clock speeds.
+
+config DRAM_DQS_GATING_DELAY
+	hex "sunxi dram dqs_gating_delay value"
+	default 0
+	---help---
+	Set the dram controller dqs_gating_delay parmeter. Each byte
+	encodes the DQS gating delay for each byte lane. The delay
+	granularity is 1/4 cycle. For example, the value 0x05060606
+	means that the delay is 5 quarter-cycles for one lane (1.25
+	cycles) and 6 quarter-cycles (1.5 cycles) for 3 other lanes.
+	The default value 0 means autodetection. The results of hardware
+	autodetection are not very reliable and depend on the chip
+	temperature (sometimes producing different results on cold start
+	and warm reboot). But the accuracy of hardware autodetection
+	is usually good enough, unless running at really high DRAM
+	clocks speeds (up to 600MHz). If unsure, keep as 0.
+
+choice
+	prompt "sunxi dram timings"
+	default DRAM_TIMINGS_VENDOR_MAGIC
+	---help---
+	Select the timings of the DDR3 chips.
+
+config DRAM_TIMINGS_VENDOR_MAGIC
+	bool "Magic vendor timings from Android"
+	---help---
+	The same DRAM timings as in the Allwinner boot0 bootloader.
+
+config DRAM_TIMINGS_DDR3_1066F_1333H
+	bool "JEDEC DDR3-1333H with down binning to DDR3-1066F"
+	---help---
+	Use the timings of the standard JEDEC DDR3-1066F speed bin for
+	DRAM_CLK <= 533MHz and the timings of the DDR3-1333H speed bin
+	for DRAM_CLK > 533MHz. This covers the majority of DDR3 chips
+	used in Allwinner A10/A13/A20 devices. In the case of DDR3-1333
+	or DDR3-1600 chips, be sure to check the DRAM datasheet to confirm
+	that down binning to DDR3-1066F is supported (because DDR3-1066F
+	uses a bit faster timings than DDR3-1333H).
+
+config DRAM_TIMINGS_DDR3_800E_1066G_1333J
+	bool "JEDEC DDR3-800E / DDR3-1066G / DDR3-1333J"
+	---help---
+	Use the timings of the slowest possible JEDEC speed bin for the
+	selected DRAM_CLK. Depending on the DRAM_CLK value, it may be
+	DDR3-800E, DDR3-1066G or DDR3-1333J.
+
+endchoice
+
 endif
 
 config SYS_CONFIG_NAME
@@ -57,149 +139,6 @@ config SYS_CONFIG_NAME
 	default "sun7i" if MACH_SUN7I
 	default "sun8i" if MACH_SUN8I
 
-choice
-	prompt "Board"
-
-config TARGET_A10_OLINUXINO_L
-	bool "A10_OLINUXINO_L"
-	depends on MACH_SUN4I
-
-config TARGET_A10S_OLINUXINO_M
-	bool "A10S_OLINUXINO_M"
-	depends on MACH_SUN5I
-
-config TARGET_A13_OLINUXINOM
-	bool "A13_OLINUXINOM"
-	depends on MACH_SUN5I
-
-config TARGET_A13_OLINUXINO
-	bool "A13_OLINUXINO"
-	depends on MACH_SUN5I
-
-config TARGET_A20_OLINUXINO_L2
-	bool "A20_OLINUXINO_L2"
-	depends on MACH_SUN7I
-
-config TARGET_A20_OLINUXINO_L
-	bool "A20_OLINUXINO_L"
-	depends on MACH_SUN7I
-
-config TARGET_A20_OLINUXINO_M
-	bool "A20_OLINUXINO_M"
-	depends on MACH_SUN7I
-
-config TARGET_AUXTEK_T004
-	bool "AUXTEK_T004"
-	depends on MACH_SUN5I
-
-config TARGET_BANANAPI
-	bool "BANANAPI"
-	depends on MACH_SUN7I
-
-config TARGET_BANANAPRO
-	bool "BANANAPRO"
-	depends on MACH_SUN7I
-
-config TARGET_COLOMBUS
-	bool "COLOMBUS"
-	depends on MACH_SUN6I
-
-config TARGET_CUBIEBOARD2
-	bool "CUBIEBOARD2"
-	depends on MACH_SUN7I
-
-config TARGET_CUBIEBOARD
-	bool "CUBIEBOARD"
-	depends on MACH_SUN4I
-
-config TARGET_CUBIETRUCK
-	bool "CUBIETRUCK"
-	depends on MACH_SUN7I
-
-config TARGET_HUMMINGBIRD_A31
-	bool "HUMMINGBIRD_A31"
-	depends on MACH_SUN6I
-
-config TARGET_IPPO_Q8H_V5
-	bool "IPPO_Q8H_V5"
-	depends on MACH_SUN8I
-
-config TARGET_PCDUINO
-	bool "PCDUINO"
-	depends on MACH_SUN4I
-
-config TARGET_PCDUINO3
-	bool "PCDUINO3"
-	depends on MACH_SUN7I
-
-config TARGET_MELE_A1000G
-	bool "MELE_A1000G"
-	depends on MACH_SUN4I
-
-config TARGET_MELE_A1000
-	bool "MELE_A1000"
-	depends on MACH_SUN4I
-
-config TARGET_MELE_M3
-	bool "MELE_M3"
-	depends on MACH_SUN7I
-
-config TARGET_MELE_M9
-	bool "MELE_M9"
-	depends on MACH_SUN6I
-
-config TARGET_MINI_X_1GB
-	bool "MINI_X_1GB"
-	depends on MACH_SUN4I
-
-config TARGET_MINI_X
-	bool "MINI_X"
-	depends on MACH_SUN4I
-
-config TARGET_MSI_PRIMO73
-	bool "MSI Primo73 (7\" tablet)"
-	depends on MACH_SUN7I
-	---help---
-	The MSI Primo73 is an A20 based tablet, with 1G RAM, 16G NAND,
-	1024x600 TN LCD display, mono speaker, 0.3 MP front camera, 2.0 MP
-	rear camera, 3000 mAh battery, gt911 touchscreen, mma8452 accelerometer
-	and rtl8188etv usb wifi. Has "power", "volume+" and "volume-" buttons
-	(both volume buttons are also connected to the UBOOT_SEL pin). The
-	external connectors are represented by MicroSD slot, MiniHDMI, MicroUSB
-	OTG and 3.5mm headphone jack. More details are available at
-	    http://linux-sunxi.org/MSI_Primo73
-
-config TARGET_MSI_PRIMO81
-	bool "MSI Primo81 (7.85\" tablet)"
-	depends on MACH_SUN6I
-	---help---
-	The MSI Primo81 is an A31s based tablet, with 1G RAM, 16G NAND,
-	1024x768 IPS LCD display, mono speaker, 0.3 MP front camera, 2.0 MP
-	rear camera, 3500 mAh battery, gt911 touchscreen, mma8452 accelerometer
-	and rtl8188etv usb wifi. Has "power", "volume+" and "volume-" buttons
-	(both volume buttons are also connected to the UBOOT_SEL pin). The
-	external connectors are represented by MicroSD slot, MiniHDMI, MicroUSB
-	OTG and 3.5mm headphone jack. More details are available at
-	    http://linux-sunxi.org/MSI_Primo81
-
-config TARGET_BA10_TV_BOX
-	bool "BA10_TV_BOX"
-	depends on MACH_SUN4I
-
-config TARGET_I12_TVBOX
-	bool "I12_TVBOX"
-	depends on MACH_SUN7I
-
-config TARGET_QT840A
-	bool "QT840A"
-	depends on MACH_SUN7I
-
-config TARGET_R7DONGLE
-	bool "R7DONGLE"
-	depends on MACH_SUN5I
-
-endchoice
-
 config SYS_BOARD
 	default "sunxi"
 
@@ -321,6 +260,16 @@ config VIDEO_VGA_VIA_LCD
 	LCD interface driving a VGA connector, such as found on the
 	Olimex A13 boards.
 
+config VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH
+	boolean "Force sync active high for VGA via LCD controller support"
+	depends on VIDEO_VGA_VIA_LCD
+	default n
+	---help---
+	Say Y here if you've a board which uses opendrain drivers for the vga
+	hsync and vsync signals. Opendrain drivers cannot generate steep enough
+	positive edges for a stable video output, so on boards with opendrain
+	drivers the sync signals must always be active high.
+
 config VIDEO_VGA_EXTERNAL_DAC_EN
 	string "LCD panel power enable pin"
 	depends on VIDEO_VGA_VIA_LCD
@@ -338,6 +287,13 @@ config VIDEO_LCD_MODE
 	This is in drivers/video/videomodes.c: video_get_params() format, e.g.
 	x:800,y:480,depth:18,pclk_khz:33000,le:16,ri:209,up:22,lo:22,hs:30,vs:1,sync:0,vmode:0
 
+config VIDEO_LCD_DCLK_PHASE
+	int "LCD panel display clock phase"
+	depends on VIDEO
+	default 1
+	---help---
+	Select LCD panel display clock phase shift, range 0-3.
+
 config VIDEO_LCD_POWER
 	string "LCD panel power enable pin"
 	depends on VIDEO
@@ -363,6 +319,13 @@ config VIDEO_LCD_BL_PWM
 	Set the backlight pwm pin for the LCD panel. This takes a string in the
 	format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
 
+config VIDEO_LCD_BL_PWM_ACTIVE_LOW
+	bool "LCD panel backlight pwm is inverted"
+	depends on VIDEO
+	default y
+	---help---
+	Set this if the backlight pwm output is active low.
+
 
 # Note only one of these may be selected at a time! But hidden choices are
 # not supported by Kconfig
@@ -387,9 +350,32 @@ config VIDEO_LCD_PANEL_LVDS
 	bool "Generic lvds interface LCD panel"
 	select VIDEO_LCD_IF_LVDS
 
+config VIDEO_LCD_PANEL_MIPI_4_LANE_513_MBPS_VIA_SSD2828
+	bool "MIPI 4-lane, 513Mbps LCD panel via SSD2828 bridge chip"
+	select VIDEO_LCD_SSD2828
+	select VIDEO_LCD_IF_PARALLEL
+	---help---
+	 7.85" 768x1024 LCD panels, such as LG LP079X01 or AUO B079XAN01.0
+
+config VIDEO_LCD_PANEL_HITACHI_TX18D42VM
+	bool "Hitachi tx18d42vm LCD panel"
+	select VIDEO_LCD_HITACHI_TX18D42VM
+	select VIDEO_LCD_IF_LVDS
+	---help---
+	7.85" 1024x768 Hitachi tx18d42vm LCD panel support
+
 endchoice
 
 
+config USB_MUSB_SUNXI
+	bool "Enable sunxi OTG / DRC USB controller in host mode"
+	default n
+	---help---
+	Say y here to enable support for the sunxi OTG / DRC USB controller
+	used on almost all sunxi boards. Note currently u-boot can only have
+	one usb host controller enabled at a time, so enabling this on boards
+	which also use the ehci host controller will result in build errors.
+
 config USB_KEYBOARD
 	boolean "Enable USB keyboard support"
 	default y
@@ -397,4 +383,10 @@ config USB_KEYBOARD
 	Say Y here to add support for using a USB keyboard (typically used
 	in combination with a graphical console).
 
+config GMAC_TX_DELAY
+	int "GMAC Transmit Clock Delay Chain"
+	default 0
+	---help---
+	Set the GMAC Transmit Clock Delay Chain value.
+
 endif
diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
index 3a09be92de..faa413cb06 100644
--- a/board/sunxi/MAINTAINERS
+++ b/board/sunxi/MAINTAINERS
@@ -5,17 +5,20 @@ F:	board/sunxi/
 F:	include/configs/sun4i.h
 F:	configs/A10-OLinuXino-Lime_defconfig
 F:	configs/ba10_tv_box_defconfig
+F:	configs/Chuwi_V7_CW0825_defconfig
 F:	configs/Cubieboard_defconfig
+F:	configs/Hyundai_A7HD_defconfig
 F:	configs/Mele_A1000_defconfig
-F:	configs/Mele_A1000G_defconfig
 F:	configs/Mele_M3_defconfig
 F:	configs/Mini-X_defconfig
-F:	configs/Mini-X-1Gb_defconfig
+F:	configs/mk802_defconfig
+F:	configs/mk802ii_defconfig
 F:	include/configs/sun5i.h
 F:	configs/A10s-OLinuXino-M_defconfig
 F:	configs/A13-OLinuXino_defconfig
 F:	configs/A13-OLinuXinoM_defconfig
 F:	configs/Auxtek-T004_defconfig
+F:	configs/mk802_a10s_defconfig
 F:	configs/r7-tv-dongle_defconfig
 F:	include/configs/sun6i.h
 F:	configs/CSQ_CS908_defconfig
@@ -31,16 +34,6 @@ F:	configs/qt840a_defconfig
 F:	include/configs/sun8i.h
 F:	configs/Ippo_q8h_v1_2_defconfig
 
-CUBIEBOARD2 BOARD
-M:	Ian Campbell <ijc@hellion.org.uk>
-M:	Hans de Goede <hdegoede@redhat.com>
-S:	Maintained
-F:	include/configs/sun7i.h
-F:	configs/Cubieboard2_defconfig
-F:	configs/Cubieboard2_FEL_defconfig
-F:	configs/Cubietruck_defconfig
-F:	configs/Cubietruck_FEL_defconfig
-
 A20-OLINUXINO-LIME BOARD
 M:	FUKAUMI Naoki <naobsd@gmail.com>
 S:	Maintained
@@ -58,16 +51,57 @@ M:	Maxime Ripard <maxime.ripard@free-electrons.com>
 S:	Maintained
 F:	configs/Colombus_defconfig
 
-HUMMINIGBIRD-A31 BOARD
+CUBIEBOARD2 BOARD
+M:	Ian Campbell <ijc@hellion.org.uk>
+M:	Hans de Goede <hdegoede@redhat.com>
+S:	Maintained
+F:	include/configs/sun7i.h
+F:	configs/Cubieboard2_defconfig
+F:	configs/Cubieboard2_FEL_defconfig
+F:	configs/Cubietruck_defconfig
+F:	configs/Cubietruck_FEL_defconfig
+
+GEMEI-G9 TABLET
+M:	Priit Laes <plaes@plaes.org>
+S:	Maintained
+F:	configs/sunxi_Gemei_G9_defconfig
+
+HUMMINGBIRD-A31 BOARD
 M:	Chen-Yu Tsai <wens@csie.org>
 S:	Maintained
 F:	configs/Hummingbird_A31_defconfig
 
+INET-86VS BOARD
+M:	Michal Suchanek <hramrach@gmail.com>
+S:	Maintained
+F:	board/sunxi/dram_inet_86vs.c
+F:	configs/Inet_86VS_defconfig
+
 IPPO-Q8H-V5 BOARD
 M:	Chen-Yu Tsai <wens@csie.org>
 S:	Maintained
 F:	configs/Ippo_q8h_v5_defconfig
 
+LINKSPRITE-PCDUINO BOARD
+M:	Zoltan Herpai <wigyori@uid0.hu>
+S:	Maintained
+F:	configs/Linksprite_pcDuino_defconfig
+
+LINKSPRITE-PCDUINO3-NANO BOARD
+M:	Adam Sampson <ats@offog.org>
+S:	Maintained
+F:	configs/Linksprite_pcDuino3_Nano_defconfig
+
+MARSBOARD-A10 BOARD
+M:	Aleksei Mamlin <mamlinav@gmail.com>
+S:	Maintained
+F:	configs/Marsboard_A10_defconfig
+
+MELE M5 BOARD
+M:	Ian Campbell <ijc@hellion.org.uk>
+S:	Maintained
+F:	configs/Mele_M5_defconfig
+
 MSI-PRIMO73 BOARD
 M:	Siarhei Siamashka <siarhei.siamashka@gmail.com>
 S:	Maintained
@@ -78,7 +112,7 @@ M:	Siarhei Siamashka <siarhei.siamashka@gmail.com>
 S:	Maintained
 F:	configs/MSI_Primo81_defconfig
 
-LINKSPRITE-PCDUINO BOARD
-M:	Zoltan Herpai <wigyori@uid0.hu>
+TZX-Q8-713B7 BOARD
+M:	Paul Kocialkowski <contact@paulk.fr>
 S:	Maintained
-F:	configs/Linksprite_pcDuino_defconfig
+F:	configs/TZX-Q8-713B7_defconfig
diff --git a/board/sunxi/Makefile b/board/sunxi/Makefile
index fab0877a54..43766e0ef4 100644
--- a/board/sunxi/Makefile
+++ b/board/sunxi/Makefile
@@ -11,29 +11,6 @@
 obj-y	+= board.o
 obj-$(CONFIG_SUNXI_GMAC)	+= gmac.o
 obj-$(CONFIG_SUNXI_AHCI)	+= ahci.o
-obj-$(CONFIG_TARGET_A10_OLINUXINO_L)	+= dram_a10_olinuxino_l.o
-obj-$(CONFIG_TARGET_A10S_OLINUXINO_M)	+= dram_a10s_olinuxino_m.o
-obj-$(CONFIG_TARGET_A13_OLINUXINO)	+= dram_a13_olinuxino.o
-obj-$(CONFIG_TARGET_A13_OLINUXINOM)	+= dram_a13_oli_micro.o
-obj-$(CONFIG_TARGET_A20_OLINUXINO_L)	+= dram_a20_olinuxino_l.o
-obj-$(CONFIG_TARGET_A20_OLINUXINO_L2)	+= dram_a20_olinuxino_l2.o
-obj-$(CONFIG_TARGET_A20_OLINUXINO_M)	+= dram_sun7i_384_1024_iow16.o
-# This is not a typo, uses the same mem settings as the a10s-olinuxino-m
-obj-$(CONFIG_TARGET_AUXTEK_T004)	+= dram_a10s_olinuxino_m.o
-obj-$(CONFIG_TARGET_BA10_TV_BOX)	+= dram_sun4i_384_1024_iow8.o
-obj-$(CONFIG_TARGET_BANANAPI)		+= dram_bananapi.o
-obj-$(CONFIG_TARGET_BANANAPRO)		+= dram_bananapi.o
-obj-$(CONFIG_TARGET_CUBIEBOARD)		+= dram_cubieboard.o
-obj-$(CONFIG_TARGET_CUBIEBOARD2)	+= dram_cubieboard2.o
-obj-$(CONFIG_TARGET_CUBIETRUCK)		+= dram_cubietruck.o
-obj-$(CONFIG_TARGET_I12_TVBOX)		+= dram_sun7i_384_1024_iow16.o
-obj-$(CONFIG_TARGET_MELE_A1000)		+= dram_sun4i_360_512.o
-obj-$(CONFIG_TARGET_MELE_A1000G)	+= dram_sun4i_360_1024_iow8.o
-obj-$(CONFIG_TARGET_MELE_M3)		+= dram_sun7i_384_1024_iow16.o
-obj-$(CONFIG_TARGET_MINI_X)		+= dram_sun4i_360_512.o
-obj-$(CONFIG_TARGET_MINI_X_1GB)		+= dram_sun4i_360_1024_iow16.o
-obj-$(CONFIG_TARGET_MSI_PRIMO73)	+= dram_sun7i_384_1024_iow16.o
-obj-$(CONFIG_TARGET_PCDUINO)		+= dram_sun4i_408_1024_iow8.o
-obj-$(CONFIG_TARGET_PCDUINO3)		+= dram_linksprite_pcduino3.o
-obj-$(CONFIG_TARGET_QT840A)		+= dram_sun7i_384_512_busw16_iow16.o
-obj-$(CONFIG_TARGET_R7DONGLE)		+= dram_r7dongle.o
+obj-$(CONFIG_MACH_SUN4I)	+= dram_sun4i_auto.o
+obj-$(CONFIG_MACH_SUN5I)	+= dram_sun5i_auto.o
+obj-$(CONFIG_MACH_SUN7I)	+= dram_sun5i_auto.o
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index 7d6d075f14..b70e00ce6b 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -28,7 +28,9 @@
 #include <asm/arch/dram.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/mmc.h>
+#include <asm/arch/usbc.h>
 #include <asm/io.h>
+#include <linux/usb/musb.h>
 #include <net.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -189,6 +191,7 @@ void sunxi_board_init(void)
 	power_failed |= axp221_set_aldo1(CONFIG_AXP221_ALDO1_VOLT);
 	power_failed |= axp221_set_aldo2(CONFIG_AXP221_ALDO2_VOLT);
 	power_failed |= axp221_set_aldo3(CONFIG_AXP221_ALDO3_VOLT);
+	power_failed |= axp221_set_eldo(3, CONFIG_AXP221_ELDO3_VOLT);
 #endif
 
 	printf("DRAM:");
@@ -208,6 +211,26 @@ void sunxi_board_init(void)
 }
 #endif
 
+#if defined(CONFIG_MUSB_HOST) || defined(CONFIG_MUSB_GADGET)
+static struct musb_hdrc_config musb_config = {
+	.multipoint     = 1,
+	.dyn_fifo       = 1,
+	.num_eps        = 6,
+	.ram_bits       = 11,
+};
+
+static struct musb_hdrc_platform_data musb_plat = {
+#if defined(CONFIG_MUSB_HOST)
+	.mode           = MUSB_HOST,
+#else
+	.mode		= MUSB_PERIPHERAL,
+#endif
+	.config         = &musb_config,
+	.power          = 250,
+	.platform_ops	= &sunxi_musb_ops,
+};
+#endif
+
 #ifdef CONFIG_MISC_INIT_R
 int misc_init_r(void)
 {
@@ -227,6 +250,9 @@ int misc_init_r(void)
 		eth_setenv_enetaddr("ethaddr", mac_addr);
 	}
 
+#if defined(CONFIG_MUSB_HOST) || defined(CONFIG_MUSB_GADGET)
+	musb_register(&musb_plat, NULL, (void *)SUNXI_USB0_BASE);
+#endif
 	return 0;
 }
 #endif
diff --git a/board/sunxi/dram_a10_olinuxino_l.c b/board/sunxi/dram_a10_olinuxino_l.c
deleted file mode 100644
index 24a1bd9453..0000000000
--- a/board/sunxi/dram_a10_olinuxino_l.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/* this file is generated, don't edit it yourself */
-
-#include <common.h>
-#include <asm/arch/dram.h>
-
-static struct dram_para dram_para = {
-	.clock = 480,
-	.type = 3,
-	.rank_num = 1,
-	.density = 4096,
-	.io_width = 16,
-	.bus_width = 16,
-	.cas = 6,
-	.zq = 123,
-	.odt_en = 0,
-	.size = 512,
-	.tpr0 = 0x30926692,
-	.tpr1 = 0x1090,
-	.tpr2 = 0x1a0c8,
-	.tpr3 = 0,
-	.tpr4 = 0,
-	.tpr5 = 0,
-	.emr1 = 0x4,
-	.emr2 = 0,
-	.emr3 = 0,
-};
-
-unsigned long sunxi_dram_init(void)
-{
-	return dramc_init(&dram_para);
-}
diff --git a/board/sunxi/dram_a10s_olinuxino_m.c b/board/sunxi/dram_a10s_olinuxino_m.c
deleted file mode 100644
index 8900539e7f..0000000000
--- a/board/sunxi/dram_a10s_olinuxino_m.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/* this file is generated, don't edit it yourself */
-
-#include <common.h>
-#include <asm/arch/dram.h>
-
-static struct dram_para dram_para = {
-	.clock = 432,
-	.type = 3,
-	.rank_num = 1,
-	.density = 4096,
-	.io_width = 16,
-	.bus_width = 16,
-	.cas = 9,
-	.zq = 123,
-	.odt_en = 0,
-	.size = 512,
-	.tpr0 = 0x42d899b7,
-	.tpr1 = 0xa090,
-	.tpr2 = 0x22a00,
-	.tpr3 = 0,
-	.tpr4 = 0,
-	.tpr5 = 0,
-	.emr1 = 0x4,
-	.emr2 = 0x10,
-	.emr3 = 0,
-};
-
-unsigned long sunxi_dram_init(void)
-{
-	return dramc_init(&dram_para);
-}
diff --git a/board/sunxi/dram_a13_oli_micro.c b/board/sunxi/dram_a13_oli_micro.c
deleted file mode 100644
index 8154ea2ca9..0000000000
--- a/board/sunxi/dram_a13_oli_micro.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/* this file is generated, don't edit it yourself */
-
-#include <common.h>
-#include <asm/arch/dram.h>
-
-static struct dram_para dram_para = {
-	.clock = 408,
-	.type = 3,
-	.rank_num = 1,
-	.density = 2048,
-	.io_width = 16,
-	.bus_width = 16,
-	.cas = 9,
-	.zq = 123,
-	.odt_en = 0,
-	.size = 256,
-	.tpr0 = 0x42d899b7,
-	.tpr1 = 0xa090,
-	.tpr2 = 0x22a00,
-	.tpr3 = 0,
-	.tpr4 = 0,
-	.tpr5 = 0,
-	.emr1 = 0,
-	.emr2 = 0x10,
-	.emr3 = 0,
-
-};
-
-unsigned long sunxi_dram_init(void)
-{
-	return dramc_init(&dram_para);
-}
diff --git a/board/sunxi/dram_a13_olinuxino.c b/board/sunxi/dram_a13_olinuxino.c
deleted file mode 100644
index ca96260250..0000000000
--- a/board/sunxi/dram_a13_olinuxino.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/* this file is generated, don't edit it yourself */
-
-#include <common.h>
-#include <asm/arch/dram.h>
-
-static struct dram_para dram_para = {
-	.clock = 408,
-	.type = 3,
-	.rank_num = 1,
-	.density = 2048,
-	.io_width = 8,
-	.bus_width = 16,
-	.cas = 9,
-	.zq = 123,
-	.odt_en = 0,
-	.size = 512,
-	.tpr0 = 0x42d899b7,
-	.tpr1 = 0xa090,
-	.tpr2 = 0x22a00,
-	.tpr3 = 0,
-	.tpr4 = 0,
-	.tpr5 = 0,
-	.emr1 = 0,
-	.emr2 = 0x10,
-	.emr3 = 0,
-};
-
-unsigned long sunxi_dram_init(void)
-{
-	return dramc_init(&dram_para);
-}
diff --git a/board/sunxi/dram_a20_olinuxino_l.c b/board/sunxi/dram_a20_olinuxino_l.c
deleted file mode 100644
index 2c74999708..0000000000
--- a/board/sunxi/dram_a20_olinuxino_l.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/* this file is generated, don't edit it yourself */
-
-#include "common.h"
-#include <asm/arch/dram.h>
-
-static struct dram_para dram_para = {
-	.clock = 480,
-	.type = 3,
-	.rank_num = 1,
-	.density = 4096,
-	.io_width = 16,
-	.bus_width = 16,
-	.cas = 9,
-	.zq = 0x7f,
-	.odt_en = 0,
-	.size = 512,
-	.tpr0 = 0x42d899b7,
-	.tpr1 = 0xa090,
-	.tpr2 = 0x22a00,
-	.tpr3 = 0,
-	.tpr4 = 0,
-	.tpr5 = 0,
-	.emr1 = 0x4,
-	.emr2 = 0x10,
-	.emr3 = 0,
-};
-
-unsigned long sunxi_dram_init(void)
-{
-	return dramc_init(&dram_para);
-}
diff --git a/board/sunxi/dram_a20_olinuxino_l2.c b/board/sunxi/dram_a20_olinuxino_l2.c
deleted file mode 100644
index 2115d37470..0000000000
--- a/board/sunxi/dram_a20_olinuxino_l2.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/* this file is generated, don't edit it yourself */
-
-#include <common.h>
-#include <asm/arch/dram.h>
-
-static struct dram_para dram_para = {
-	.clock = 480,
-	.type = 3,
-	.rank_num = 1,
-	.density = 4096,
-	.io_width = 16,
-	.bus_width = 32,
-	.cas = 9,
-	.zq = 0x7f,
-	.odt_en = 0,
-	.size = 1024,
-	.tpr0 = 0x42d899b7,
-	.tpr1 = 0xa090,
-	.tpr2 = 0x22a00,
-	.tpr3 = 0,
-	.tpr4 = 0,
-	.tpr5 = 0,
-	.emr1 = 0x4,
-	.emr2 = 0x10,
-	.emr3 = 0,
-};
-
-unsigned long sunxi_dram_init(void)
-{
-	return dramc_init(&dram_para);
-}
diff --git a/board/sunxi/dram_bananapi.c b/board/sunxi/dram_bananapi.c
deleted file mode 100644
index 0ed7943043..0000000000
--- a/board/sunxi/dram_bananapi.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/* this file is generated, don't edit it yourself */
-
-#include <common.h>
-#include <asm/arch/dram.h>
-
-static struct dram_para dram_para = {
-	.clock = 432,
-	.type = 3,
-	.rank_num = 1,
-	.density = 4096,
-	.io_width = 16,
-	.bus_width = 32,
-	.cas = 9,
-	.zq = 0x7f,
-	.odt_en = 0,
-	.size = 1024,
-	.tpr0 = 0x42d899b7,
-	.tpr1 = 0xa090,
-	.tpr2 = 0x22a00,
-	.tpr3 = 0x0,
-	.tpr4 = 0x1,
-	.tpr5 = 0x0,
-	.emr1 = 0x4,
-	.emr2 = 0x10,
-	.emr3 = 0x0,
-};
-
-unsigned long sunxi_dram_init(void)
-{
-	return dramc_init(&dram_para);
-}
diff --git a/board/sunxi/dram_cubieboard.c b/board/sunxi/dram_cubieboard.c
deleted file mode 100644
index 399028ca96..0000000000
--- a/board/sunxi/dram_cubieboard.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/* this file is generated, don't edit it yourself */
-
-#include <common.h>
-#include <asm/arch/dram.h>
-
-static struct dram_para dram_para = {
-	.clock = 480,
-	.type = 3,
-	.rank_num = 1,
-	.density = 4096,
-	.io_width = 16,
-	.bus_width = 32,
-	.cas = 6,
-	.zq = 123,
-	.odt_en = 0,
-	.size = 1024,
-	.tpr0 = 0x30926692,
-	.tpr1 = 0x1090,
-	.tpr2 = 0x1a0c8,
-	.tpr3 = 0,
-	.tpr4 = 0,
-	.tpr5 = 0,
-	.emr1 = 0,
-	.emr2 = 0,
-	.emr3 = 0,
-};
-
-unsigned long sunxi_dram_init(void)
-{
-	return dramc_init(&dram_para);
-}
diff --git a/board/sunxi/dram_cubieboard2.c b/board/sunxi/dram_cubieboard2.c
deleted file mode 100644
index 9e753677c5..0000000000
--- a/board/sunxi/dram_cubieboard2.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/* this file is generated, don't edit it yourself */
-
-#include <common.h>
-#include <asm/arch/dram.h>
-
-static struct dram_para dram_para = {
-	.clock = 480,
-	.type = 3,
-	.rank_num = 1,
-	.density = 4096,
-	.io_width = 16,
-	.bus_width = 32,
-	.cas = 9,
-	.zq = 0x7f,
-	.odt_en = 0,
-	.size = 1024,
-	.tpr0 = 0x42d899b7,
-	.tpr1 = 0xa090,
-	.tpr2 = 0x22a00,
-	.tpr3 = 0x0,
-	.tpr4 = 0x1,
-	.tpr5 = 0x0,
-	.emr1 = 0x4,
-	.emr2 = 0x10,
-	.emr3 = 0x0,
-};
-
-unsigned long sunxi_dram_init(void)
-{
-	return dramc_init(&dram_para);
-}
diff --git a/board/sunxi/dram_cubietruck.c b/board/sunxi/dram_cubietruck.c
deleted file mode 100644
index fbcd68771f..0000000000
--- a/board/sunxi/dram_cubietruck.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/* this file is generated, don't edit it yourself */
-
-#include <common.h>
-#include <asm/arch/dram.h>
-
-static struct dram_para dram_para = {
-	.clock = 432,
-	.type = 3,
-	.rank_num = 1,
-	.density = 4096,
-	.io_width = 8,
-	.bus_width = 32,
-	.cas = 9,
-	.zq = 0x7f,
-	.odt_en = 0,
-	.size = 2048,
-	.tpr0 = 0x42d899b7,
-	.tpr1 = 0xa090,
-	.tpr2 = 0x22a00,
-	.tpr3 = 0x0,
-	.tpr4 = 0x1,
-	.tpr5 = 0x0,
-	.emr1 = 0x4,
-	.emr2 = 0x10,
-	.emr3 = 0x0,
-};
-
-unsigned long sunxi_dram_init(void)
-{
-	return dramc_init(&dram_para);
-}
diff --git a/board/sunxi/dram_linksprite_pcduino3.c b/board/sunxi/dram_linksprite_pcduino3.c
deleted file mode 100644
index 9cc6e19ee5..0000000000
--- a/board/sunxi/dram_linksprite_pcduino3.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/* this file is generated, don't edit it yourself */
-
-#include <common.h>
-#include <asm/arch/dram.h>
-
-static struct dram_para dram_para = {
-	.clock = 480,
-	.type = 3,
-	.rank_num = 1,
-	.density = 4096,
-	.io_width = 16,
-	.bus_width = 32,
-	.cas = 9,
-	.zq = 0x7a,
-	.odt_en = 0,
-	.size = 1024,
-	.tpr0 = 0x42d899b7,
-	.tpr1 = 0xa090,
-	.tpr2 = 0x22a00,
-	.tpr3 = 0,
-	.tpr4 = 0,
-	.tpr5 = 0,
-	.emr1 = 0x4,
-	.emr2 = 0x10,
-	.emr3 = 0x0,
-};
-
-unsigned long sunxi_dram_init(void)
-{
-	return dramc_init(&dram_para);
-}
diff --git a/board/sunxi/dram_r7dongle.c b/board/sunxi/dram_r7dongle.c
deleted file mode 100644
index 59343cb2a5..0000000000
--- a/board/sunxi/dram_r7dongle.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/* this file is generated, don't edit it yourself */
-
-#include <common.h>
-#include <asm/arch/dram.h>
-
-static struct dram_para dram_para = {
-	.clock = 384,
-	.type = 3,
-	.rank_num = 1,
-	.density = 2048,
-	.io_width = 8,
-	.bus_width = 32,
-	.cas = 9,
-	.zq = 123,
-	.odt_en = 0,
-	.size = 1024,
-	.tpr0 = 0x42d899b7,
-	.tpr1 = 0xa090,
-	.tpr2 = 0x22a00,
-	.tpr3 = 0,
-	.tpr4 = 0,
-	.tpr5 = 0,
-	.emr1 = 0x04,
-	.emr2 = 0x10,
-	.emr3 = 0,
-};
-
-unsigned long sunxi_dram_init(void)
-{
-	return dramc_init(&dram_para);
-}
diff --git a/board/sunxi/dram_sun4i_360_1024_iow16.c b/board/sunxi/dram_sun4i_360_1024_iow16.c
deleted file mode 100644
index 376371330d..0000000000
--- a/board/sunxi/dram_sun4i_360_1024_iow16.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/* this file is generated, don't edit it yourself */
-
-#include <common.h>
-#include <asm/arch/dram.h>
-
-static struct dram_para dram_para = {
-	.clock = 360,
-	.type = 3,
-	.rank_num = 1,
-	.density = 4096,
-	.io_width = 16,
-	.bus_width = 32,
-	.cas = 6,
-	.zq = 123,
-	.odt_en = 0,
-	.size = 1024,
-	.tpr0 = 0x30926692,
-	.tpr1 = 0x1090,
-	.tpr2 = 0x1a0c8,
-	.tpr3 = 0,
-	.tpr4 = 0,
-	.tpr5 = 0,
-	.emr1 = 0,
-	.emr2 = 0,
-	.emr3 = 0,
-};
-
-unsigned long sunxi_dram_init(void)
-{
-	return dramc_init(&dram_para);
-}
diff --git a/board/sunxi/dram_sun4i_360_1024_iow8.c b/board/sunxi/dram_sun4i_360_1024_iow8.c
deleted file mode 100644
index 2a5c9edd91..0000000000
--- a/board/sunxi/dram_sun4i_360_1024_iow8.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/* this file is generated, don't edit it yourself */
-
-#include <common.h>
-#include <asm/arch/dram.h>
-
-static struct dram_para dram_para = {
-	.clock = 360,
-	.type = 3,
-	.rank_num = 1,
-	.density = 2048,
-	.io_width = 8,
-	.bus_width = 32,
-	.cas = 6,
-	.zq = 123,
-	.odt_en = 0,
-	.size = 1024,
-	.tpr0 = 0x30926692,
-	.tpr1 = 0x1090,
-	.tpr2 = 0x1a0c8,
-	.tpr3 = 0,
-	.tpr4 = 0,
-	.tpr5 = 0,
-	.emr1 = 0,
-	.emr2 = 0,
-	.emr3 = 0,
-};
-
-unsigned long sunxi_dram_init(void)
-{
-	return dramc_init(&dram_para);
-}
diff --git a/board/sunxi/dram_sun4i_360_512.c b/board/sunxi/dram_sun4i_360_512.c
deleted file mode 100644
index 48aa6e2d63..0000000000
--- a/board/sunxi/dram_sun4i_360_512.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/* this file is generated, don't edit it yourself */
-
-#include <common.h>
-#include <asm/arch/dram.h>
-
-static struct dram_para dram_para = {
-	.clock = 360,
-	.type = 3,
-	.rank_num = 1,
-	.density = 2048,
-	.io_width = 16,
-	.bus_width = 32,
-	.cas = 6,
-	.zq = 123,
-	.odt_en = 0,
-	.size = 512,
-	.tpr0 = 0x30926692,
-	.tpr1 = 0x1090,
-	.tpr2 = 0x1a0c8,
-	.tpr3 = 0,
-	.tpr4 = 0,
-	.tpr5 = 0,
-	.emr1 = 0,
-	.emr2 = 0,
-	.emr3 = 0,
-};
-
-unsigned long sunxi_dram_init(void)
-{
-	return dramc_init(&dram_para);
-}
diff --git a/board/sunxi/dram_sun4i_384_1024_iow8.c b/board/sunxi/dram_sun4i_384_1024_iow8.c
deleted file mode 100644
index b0fcc55654..0000000000
--- a/board/sunxi/dram_sun4i_384_1024_iow8.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/* this file is generated, don't edit it yourself */
-
-#include <common.h>
-#include <asm/arch/dram.h>
-
-static struct dram_para dram_para = {
-	.clock = 384,
-	.type = 3,
-	.rank_num = 1,
-	.density = 2048,
-	.io_width = 8,
-	.bus_width = 32,
-	.cas = 6,
-	.zq = 123,
-	.odt_en = 0,
-	.size = 1024,
-	.tpr0 = 0x30926692,
-	.tpr1 = 0x1090,
-	.tpr2 = 0x1a0c8,
-	.tpr3 = 0,
-	.tpr4 = 0,
-	.tpr5 = 0,
-	.emr1 = 0x4,
-	.emr2 = 0,
-	.emr3 = 0,
-};
-
-unsigned long sunxi_dram_init(void)
-{
-	return dramc_init(&dram_para);
-}
diff --git a/board/sunxi/dram_sun4i_408_1024_iow8.c b/board/sunxi/dram_sun4i_408_1024_iow8.c
deleted file mode 100644
index c6d87d23d9..0000000000
--- a/board/sunxi/dram_sun4i_408_1024_iow8.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/* this file is generated, don't edit it yourself */
-
-#include <common.h>
-#include <asm/arch/dram.h>
-
-static struct dram_para dram_para = {
-	.clock = 408,
-	.type = 3,
-	.rank_num = 1,
-	.density = 2048,
-	.io_width = 8,
-	.bus_width = 32,
-	.cas = 6,
-	.zq = 123,
-	.odt_en = 0,
-	.size = 1024,
-	.tpr0 = 0x30926692,
-	.tpr1 = 0x1090,
-	.tpr2 = 0x1a0c8,
-	.tpr3 = 0,
-	.tpr4 = 0,
-	.tpr5 = 0,
-	.emr1 = 0,
-	.emr2 = 0,
-	.emr3 = 0,
-};
-
-unsigned long sunxi_dram_init(void)
-{
-	return dramc_init(&dram_para);
-}
diff --git a/board/sunxi/dram_sun4i_auto.c b/board/sunxi/dram_sun4i_auto.c
new file mode 100644
index 0000000000..09e0c9ae2e
--- /dev/null
+++ b/board/sunxi/dram_sun4i_auto.c
@@ -0,0 +1,35 @@
+#include <common.h>
+#include <asm/arch/dram.h>
+
+static struct dram_para dram_para = {
+	.clock = CONFIG_DRAM_CLK,
+	.type = 3,
+	.rank_num = 1,
+	.density = 0,
+	.io_width = 0,
+	.bus_width = 0,
+	.zq = CONFIG_DRAM_ZQ,
+	.odt_en = CONFIG_DRAM_ODT_EN,
+	.size = 0,
+#ifdef CONFIG_DRAM_TIMINGS_VENDOR_MAGIC
+	.cas = 6,
+	.tpr0 = 0x30926692,
+	.tpr1 = 0x1090,
+	.tpr2 = 0x1a0c8,
+	.emr2 = 0,
+#else
+#	include "dram_timings_sun4i.h"
+	.active_windowing = 1,
+#endif
+	.tpr3 = CONFIG_DRAM_TPR3,
+	.tpr4 = 0,
+	.tpr5 = 0,
+	.emr1 = CONFIG_DRAM_EMR1,
+	.emr3 = 0,
+	.dqs_gating_delay = CONFIG_DRAM_DQS_GATING_DELAY,
+};
+
+unsigned long sunxi_dram_init(void)
+{
+	return dramc_init(&dram_para);
+}
diff --git a/board/sunxi/dram_sun5i_auto.c b/board/sunxi/dram_sun5i_auto.c
new file mode 100644
index 0000000000..e52d54c32e
--- /dev/null
+++ b/board/sunxi/dram_sun5i_auto.c
@@ -0,0 +1,38 @@
+/* DRAM parameters for auto dram configuration on sun5i and sun7i */
+
+#include <common.h>
+#include <asm/arch/dram.h>
+
+static struct dram_para dram_para = {
+	.clock = CONFIG_DRAM_CLK,
+	.mbus_clock = CONFIG_DRAM_MBUS_CLK,
+	.type = 3,
+	.rank_num = 1,
+	.density = 0,
+	.io_width = 0,
+	.bus_width = 0,
+	.zq = CONFIG_DRAM_ZQ,
+	.odt_en = CONFIG_DRAM_ODT_EN,
+	.size = 0,
+#ifdef CONFIG_DRAM_TIMINGS_VENDOR_MAGIC
+	.cas = 9,
+	.tpr0 = 0x42d899b7,
+	.tpr1 = 0xa090,
+	.tpr2 = 0x22a00,
+	.emr2 = 0x10,
+#else
+#	include "dram_timings_sun4i.h"
+	.active_windowing = 1,
+#endif
+	.tpr3 = 0,
+	.tpr4 = 0,
+	.tpr5 = 0,
+	.emr1 = CONFIG_DRAM_EMR1,
+	.emr3 = 0,
+	.dqs_gating_delay = CONFIG_DRAM_DQS_GATING_DELAY,
+};
+
+unsigned long sunxi_dram_init(void)
+{
+	return dramc_init(&dram_para);
+}
diff --git a/board/sunxi/dram_sun7i_384_1024_iow16.c b/board/sunxi/dram_sun7i_384_1024_iow16.c
deleted file mode 100644
index 04e4b1e9b9..0000000000
--- a/board/sunxi/dram_sun7i_384_1024_iow16.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/* this file is generated, don't edit it yourself */
-
-#include "common.h"
-#include <asm/arch/dram.h>
-
-static struct dram_para dram_para = {
-	.clock = 384,
-	.type = 3,
-	.rank_num = 1,
-	.density = 4096,
-	.io_width = 16,
-	.bus_width = 32,
-	.cas = 9,
-	.zq = 0x7f,
-	.odt_en = 0,
-	.size = 1024,
-	.tpr0 = 0x42d899b7,
-	.tpr1 = 0xa090,
-	.tpr2 = 0x22a00,
-	.tpr3 = 0,
-	.tpr4 = 0,
-	.tpr5 = 0,
-	.emr1 = 0x4,
-	.emr2 = 0x10,
-	.emr3 = 0,
-};
-
-unsigned long sunxi_dram_init(void)
-{
-	return dramc_init(&dram_para);
-}
diff --git a/board/sunxi/dram_sun7i_384_512_busw16_iow16.c b/board/sunxi/dram_sun7i_384_512_busw16_iow16.c
deleted file mode 100644
index 2e36011af5..0000000000
--- a/board/sunxi/dram_sun7i_384_512_busw16_iow16.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/* this file is generated, don't edit it yourself */
-
-#include "common.h"
-#include <asm/arch/dram.h>
-
-static struct dram_para dram_para = {
-	.clock = 384,
-	.type = 3,
-	.rank_num = 1,
-	.density = 4096,
-	.io_width = 16,
-	.bus_width = 16,
-	.cas = 9,
-	.zq = 0x7f,
-	.odt_en = 0,
-	.size = 512,
-	.tpr0 = 0x42d899b7,
-	.tpr1 = 0xa090,
-	.tpr2 = 0x22a00,
-	.tpr3 = 0,
-	.tpr4 = 0,
-	.tpr5 = 0,
-	.emr1 = 0x4,
-	.emr2 = 0x10,
-	.emr3 = 0,
-};
-
-unsigned long sunxi_dram_init(void)
-{
-	return dramc_init(&dram_para);
-}
diff --git a/board/sunxi/dram_timings_sun4i.h b/board/sunxi/dram_timings_sun4i.h
new file mode 100644
index 0000000000..29b934da63
--- /dev/null
+++ b/board/sunxi/dram_timings_sun4i.h
@@ -0,0 +1,205 @@
+/* This file is automatically generated, do not edit */
+
+#if defined(CONFIG_DRAM_TIMINGS_DDR3_1066F_1333H)
+# if CONFIG_DRAM_CLK <= 360 /* DDR3-1066F @360MHz, timings: 6-5-5-14 */
+	.cas  = 6,
+	.tpr0 = 0x268e5590,
+	.tpr1 = 0xa090,
+	.tpr2 = 0x22a00,
+	.emr2 = 0x0,
+# elif CONFIG_DRAM_CLK <= 384 /* DDR3-1066F @384MHz, timings: 6-6-6-15 */
+	.cas  = 6,
+	.tpr0 = 0x288f6690,
+	.tpr1 = 0xa0a0,
+	.tpr2 = 0x22a00,
+	.emr2 = 0x0,
+# elif CONFIG_DRAM_CLK <= 396 /* DDR3-1066F @396MHz, timings: 6-6-6-15 */
+	.cas  = 6,
+	.tpr0 = 0x2a8f6690,
+	.tpr1 = 0xa0a0,
+	.tpr2 = 0x22a00,
+	.emr2 = 0x0,
+# elif CONFIG_DRAM_CLK <= 408 /* DDR3-1066F @408MHz, timings: 7-6-6-16 */
+	.cas  = 7,
+	.tpr0 = 0x2ab06690,
+	.tpr1 = 0xa0a8,
+	.tpr2 = 0x22a00,
+	.emr2 = 0x8,
+# elif CONFIG_DRAM_CLK <= 432 /* DDR3-1066F @432MHz, timings: 7-6-6-17 */
+	.cas  = 7,
+	.tpr0 = 0x2cb16690,
+	.tpr1 = 0xa0b0,
+	.tpr2 = 0x22e00,
+	.emr2 = 0x8,
+# elif CONFIG_DRAM_CLK <= 456 /* DDR3-1066F @456MHz, timings: 7-6-6-18 */
+	.cas  = 7,
+	.tpr0 = 0x30b26690,
+	.tpr1 = 0xa0b8,
+	.tpr2 = 0x22e00,
+	.emr2 = 0x8,
+# elif CONFIG_DRAM_CLK <= 468 /* DDR3-1066F @468MHz, timings: 7-7-7-18 */
+	.cas  = 7,
+	.tpr0 = 0x30b27790,
+	.tpr1 = 0xa0c0,
+	.tpr2 = 0x23200,
+	.emr2 = 0x8,
+# elif CONFIG_DRAM_CLK <= 480 /* DDR3-1066F @480MHz, timings: 7-7-7-18 */
+	.cas  = 7,
+	.tpr0 = 0x32b27790,
+	.tpr1 = 0xa0c0,
+	.tpr2 = 0x23200,
+	.emr2 = 0x8,
+# elif CONFIG_DRAM_CLK <= 504 /* DDR3-1066F @504MHz, timings: 7-7-7-19 */
+	.cas  = 7,
+	.tpr0 = 0x34d37790,
+	.tpr1 = 0xa0d0,
+	.tpr2 = 0x23600,
+	.emr2 = 0x8,
+# elif CONFIG_DRAM_CLK <= 528 /* DDR3-1066F @528MHz, timings: 7-7-7-20 */
+	.cas  = 7,
+	.tpr0 = 0x36d47790,
+	.tpr1 = 0xa0d8,
+	.tpr2 = 0x23600,
+	.emr2 = 0x8,
+# elif CONFIG_DRAM_CLK <= 540 /* DDR3-1333H @540MHz, timings: 9-8-8-20 */
+	.cas  = 9,
+	.tpr0 = 0x36b488b4,
+	.tpr1 = 0xa0c8,
+	.tpr2 = 0x2b600,
+	.emr2 = 0x10,
+# elif CONFIG_DRAM_CLK <= 552 /* DDR3-1333H @552MHz, timings: 9-8-8-20 */
+	.cas  = 9,
+	.tpr0 = 0x38b488b4,
+	.tpr1 = 0xa0c8,
+	.tpr2 = 0x2ba00,
+	.emr2 = 0x10,
+# elif CONFIG_DRAM_CLK <= 576 /* DDR3-1333H @576MHz, timings: 9-8-8-21 */
+	.cas  = 9,
+	.tpr0 = 0x3ab588b4,
+	.tpr1 = 0xa0d0,
+	.tpr2 = 0x2ba00,
+	.emr2 = 0x10,
+# elif CONFIG_DRAM_CLK <= 600 /* DDR3-1333H @600MHz, timings: 9-9-9-22 */
+	.cas  = 9,
+	.tpr0 = 0x3cb699b4,
+	.tpr1 = 0xa0d8,
+	.tpr2 = 0x2be00,
+	.emr2 = 0x10,
+# elif CONFIG_DRAM_CLK <= 624 /* DDR3-1333H @624MHz, timings: 9-9-9-23 */
+	.cas  = 9,
+	.tpr0 = 0x3eb799b4,
+	.tpr1 = 0xa0e8,
+	.tpr2 = 0x2be00,
+	.emr2 = 0x10,
+# elif CONFIG_DRAM_CLK <= 648 /* DDR3-1333H @648MHz, timings: 9-9-9-24 */
+	.cas  = 9,
+	.tpr0 = 0x42b899b4,
+	.tpr1 = 0xa0f0,
+	.tpr2 = 0x2c200,
+	.emr2 = 0x10,
+# else
+#   error CONFIG_DRAM_CLK is set too high
+# endif
+#elif defined(CONFIG_DRAM_TIMINGS_DDR3_800E_1066G_1333J)
+# if CONFIG_DRAM_CLK <= 360 /* DDR3-800E @360MHz, timings: 6-6-6-14 */
+	.cas  = 6,
+	.tpr0 = 0x268e6690,
+	.tpr1 = 0xa090,
+	.tpr2 = 0x22a00,
+	.emr2 = 0x0,
+# elif CONFIG_DRAM_CLK <= 384 /* DDR3-800E @384MHz, timings: 6-6-6-15 */
+	.cas  = 6,
+	.tpr0 = 0x2a8f6690,
+	.tpr1 = 0xa0a0,
+	.tpr2 = 0x22a00,
+	.emr2 = 0x0,
+# elif CONFIG_DRAM_CLK <= 396 /* DDR3-800E @396MHz, timings: 6-6-6-15 */
+	.cas  = 6,
+	.tpr0 = 0x2a8f6690,
+	.tpr1 = 0xa0a0,
+	.tpr2 = 0x22a00,
+	.emr2 = 0x0,
+# elif CONFIG_DRAM_CLK <= 408 /* DDR3-1066G @408MHz, timings: 8-7-7-16 */
+	.cas  = 8,
+	.tpr0 = 0x2cb07790,
+	.tpr1 = 0xa0a8,
+	.tpr2 = 0x22a00,
+	.emr2 = 0x8,
+# elif CONFIG_DRAM_CLK <= 432 /* DDR3-1066G @432MHz, timings: 8-7-7-17 */
+	.cas  = 8,
+	.tpr0 = 0x2eb17790,
+	.tpr1 = 0xa0b0,
+	.tpr2 = 0x22e00,
+	.emr2 = 0x8,
+# elif CONFIG_DRAM_CLK <= 456 /* DDR3-1066G @456MHz, timings: 8-7-7-18 */
+	.cas  = 8,
+	.tpr0 = 0x30b27790,
+	.tpr1 = 0xa0b8,
+	.tpr2 = 0x22e00,
+	.emr2 = 0x8,
+# elif CONFIG_DRAM_CLK <= 468 /* DDR3-1066G @468MHz, timings: 8-8-8-18 */
+	.cas  = 8,
+	.tpr0 = 0x32b28890,
+	.tpr1 = 0xa0c0,
+	.tpr2 = 0x23200,
+	.emr2 = 0x8,
+# elif CONFIG_DRAM_CLK <= 480 /* DDR3-1066G @480MHz, timings: 8-8-8-18 */
+	.cas  = 8,
+	.tpr0 = 0x34b28890,
+	.tpr1 = 0xa0c0,
+	.tpr2 = 0x23200,
+	.emr2 = 0x8,
+# elif CONFIG_DRAM_CLK <= 504 /* DDR3-1066G @504MHz, timings: 8-8-8-19 */
+	.cas  = 8,
+	.tpr0 = 0x36d38890,
+	.tpr1 = 0xa0d0,
+	.tpr2 = 0x23600,
+	.emr2 = 0x8,
+# elif CONFIG_DRAM_CLK <= 528 /* DDR3-1066G @528MHz, timings: 8-8-8-20 */
+	.cas  = 8,
+	.tpr0 = 0x38d48890,
+	.tpr1 = 0xa0d8,
+	.tpr2 = 0x23600,
+	.emr2 = 0x8,
+# elif CONFIG_DRAM_CLK <= 540 /* DDR3-1333J @540MHz, timings: 10-9-9-20 */
+	.cas  = 10,
+	.tpr0 = 0x38b499b4,
+	.tpr1 = 0xa0c8,
+	.tpr2 = 0x2b600,
+	.emr2 = 0x10,
+# elif CONFIG_DRAM_CLK <= 552 /* DDR3-1333J @552MHz, timings: 10-9-9-20 */
+	.cas  = 10,
+	.tpr0 = 0x3ab499b4,
+	.tpr1 = 0xa0c8,
+	.tpr2 = 0x2ba00,
+	.emr2 = 0x10,
+# elif CONFIG_DRAM_CLK <= 576 /* DDR3-1333J @576MHz, timings: 10-9-9-21 */
+	.cas  = 10,
+	.tpr0 = 0x3cb599b4,
+	.tpr1 = 0xa0d0,
+	.tpr2 = 0x2ba00,
+	.emr2 = 0x10,
+# elif CONFIG_DRAM_CLK <= 600 /* DDR3-1333J @600MHz, timings: 10-9-9-22 */
+	.cas  = 10,
+	.tpr0 = 0x3eb699b4,
+	.tpr1 = 0xa0d8,
+	.tpr2 = 0x2be00,
+	.emr2 = 0x10,
+# elif CONFIG_DRAM_CLK <= 624 /* DDR3-1333J @624MHz, timings: 10-10-10-23 */
+	.cas  = 10,
+	.tpr0 = 0x40b7aab4,
+	.tpr1 = 0xa0e8,
+	.tpr2 = 0x2be00,
+	.emr2 = 0x10,
+# elif CONFIG_DRAM_CLK <= 648 /* DDR3-1333J @648MHz, timings: 10-10-10-24 */
+	.cas  = 10,
+	.tpr0 = 0x44b8aab4,
+	.tpr1 = 0xa0f0,
+	.tpr2 = 0x2c200,
+	.emr2 = 0x10,
+# else
+#   error CONFIG_DRAM_CLK is set too high
+# endif
+#else
+# error CONFIG_DRAM_TIMINGS_* is not defined
+#endif
diff --git a/board/sunxi/gmac.c b/board/sunxi/gmac.c
index 4e4615e12f..8849132627 100644
--- a/board/sunxi/gmac.c
+++ b/board/sunxi/gmac.c
@@ -24,20 +24,13 @@ int sunxi_gmac_initialize(bd_t *bis)
 #ifdef CONFIG_RGMII
 	setbits_le32(&ccm->gmac_clk_cfg, CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII |
 		CCM_GMAC_CTRL_GPIT_RGMII);
+	setbits_le32(&ccm->gmac_clk_cfg,
+		     CCM_GMAC_CTRL_TX_CLK_DELAY(CONFIG_GMAC_TX_DELAY));
 #else
 	setbits_le32(&ccm->gmac_clk_cfg, CCM_GMAC_CTRL_TX_CLK_SRC_MII |
 		CCM_GMAC_CTRL_GPIT_MII);
 #endif
 
-	/*
-	 * In order for the gmac nic to work reliable on the Bananapi, we
-	 * need to set bits 10-12 GTXDC "GMAC Transmit Clock Delay Chain"
-	 * of the GMAC clk register to 3.
-	 */
-#if defined CONFIG_TARGET_BANANAPI || defined CONFIG_TARGET_BANANAPRO
-	setbits_le32(&ccm->gmac_clk_cfg, 0x3 << 10);
-#endif
-
 #ifndef CONFIG_MACH_SUN6I
 	/* Configure pin mux settings for GMAC */
 	for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(16); pin++) {
diff --git a/board/synopsys/Kconfig b/board/synopsys/Kconfig
index a54d3dfde3..8ab48cd91c 100644
--- a/board/synopsys/Kconfig
+++ b/board/synopsys/Kconfig
@@ -1,8 +1,5 @@
 if TARGET_ARCANGEL4
 
-config SYS_CPU
-	default "arc700"
-
 config SYS_VENDOR
 	default "synopsys"
 
@@ -10,16 +7,3 @@ config SYS_CONFIG_NAME
 	default "arcangel4"
 
 endif
-
-if TARGET_ARCANGEL4_BE
-
-config SYS_CPU
-	default "arc700"
-
-config SYS_VENDOR
-	default "synopsys"
-
-config SYS_CONFIG_NAME
-	default "arcangel4-be"
-
-endif
diff --git a/board/synopsys/MAINTAINERS b/board/synopsys/MAINTAINERS
index 720edd8893..43114cea5e 100644
--- a/board/synopsys/MAINTAINERS
+++ b/board/synopsys/MAINTAINERS
@@ -3,5 +3,4 @@ M:	Alexey Brodkin <abrodkin@synopsys.com>
 S:	Maintained
 F:	include/configs/arcangel4.h
 F:	configs/arcangel4_defconfig
-F:	include/configs/arcangel4-be.h
 F:	configs/arcangel4-be_defconfig
diff --git a/board/synopsys/axs101/Kconfig b/board/synopsys/axs101/Kconfig
index 8448265888..79e5400ea8 100644
--- a/board/synopsys/axs101/Kconfig
+++ b/board/synopsys/axs101/Kconfig
@@ -1,8 +1,5 @@
 if TARGET_AXS101
 
-config SYS_CPU
-	default "arc700"
-
 config SYS_BOARD
 	default "axs101"
 
diff --git a/board/toradex/apalis_t30/apalis_t30.c b/board/toradex/apalis_t30/apalis_t30.c
index 5d2c024e89..624421496a 100644
--- a/board/toradex/apalis_t30/apalis_t30.c
+++ b/board/toradex/apalis_t30/apalis_t30.c
@@ -42,7 +42,7 @@ int tegra_pcie_board_init(void)
 	u8 addr, data[1];
 	int err;
 
-	err = i2c_get_chip_for_busnum(0, PMU_I2C_ADDRESS, &dev);
+	err = i2c_get_chip_for_busnum(0, PMU_I2C_ADDRESS, 1, &dev);
 	if (err) {
 		debug("%s: Cannot find PMIC I2C chip\n", __func__);
 		return err;
@@ -51,7 +51,7 @@ int tegra_pcie_board_init(void)
 	data[0] = 0x27;
 	addr = 0x25;
 
-	err = i2c_write(dev, addr, data, 1);
+	err = dm_i2c_write(dev, addr, data, 1);
 	if (err) {
 		debug("failed to set VDD supply\n");
 		return err;
@@ -61,7 +61,7 @@ int tegra_pcie_board_init(void)
 	data[0] = 0x0D;
 	addr = 0x24;
 
-	err = i2c_write(dev, addr, data, 1);
+	err = dm_i2c_write(dev, addr, data, 1);
 	if (err) {
 		debug("failed to enable VDD supply\n");
 		return err;
@@ -71,7 +71,7 @@ int tegra_pcie_board_init(void)
 	data[0] = 0x0D;
 	addr = 0x35;
 
-	err = i2c_write(dev, addr, data, 1);
+	err = dm_i2c_write(dev, addr, data, 1);
 	if (err) {
 		debug("failed to set AVDD supply\n");
 		return err;
diff --git a/board/total5200/Kconfig b/board/total5200/Kconfig
deleted file mode 100644
index ffa9516a55..0000000000
--- a/board/total5200/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-if TARGET_TOTAL5200
-
-config SYS_BOARD
-	default "total5200"
-
-config SYS_CONFIG_NAME
-	default "Total5200"
-
-endif
diff --git a/board/total5200/MAINTAINERS b/board/total5200/MAINTAINERS
deleted file mode 100644
index afb0058d08..0000000000
--- a/board/total5200/MAINTAINERS
+++ /dev/null
@@ -1,9 +0,0 @@
-TOTAL5200 BOARD
-#M:	-
-S:	Maintained
-F:	board/total5200/
-F:	include/configs/Total5200.h
-F:	configs/Total5200_defconfig
-F:	configs/Total5200_lowboot_defconfig
-F:	configs/Total5200_Rev2_defconfig
-F:	configs/Total5200_Rev2_lowboot_defconfig
diff --git a/board/total5200/Makefile b/board/total5200/Makefile
deleted file mode 100644
index 527557ca3c..0000000000
--- a/board/total5200/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= total5200.o sdram.o
diff --git a/board/total5200/mt48lc16m16a2-75.h b/board/total5200/mt48lc16m16a2-75.h
deleted file mode 100644
index 068a9a6ee0..0000000000
--- a/board/total5200/mt48lc16m16a2-75.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@freescale.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#define SDRAM_DDR	0		/* is SDR */
-
-/* Settings for XLB = 132 MHz */
-#define SDRAM_MODE	0x00CD0000
-#define SDRAM_CONTROL	0x504F0000
-#define SDRAM_CONFIG1	0xD2322800
-#define SDRAM_CONFIG2	0x8AD70000
diff --git a/board/total5200/mt48lc32m16a2-75.h b/board/total5200/mt48lc32m16a2-75.h
deleted file mode 100644
index 037741722a..0000000000
--- a/board/total5200/mt48lc32m16a2-75.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@freescale.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * Micron MT48LC32M16A2-75 is compatible to:
- *  - Infineon HYB39S512160AT-75
- */
-
-#define SDRAM_DDR	0		/* is SDR */
-
-/* Settings for XLB = 132 MHz */
-#define SDRAM_MODE	0x00CD0000
-#define SDRAM_CONTROL	0x514F0000
-#define SDRAM_CONFIG1	0xD2322800
-#define SDRAM_CONFIG2	0x8AD70000
diff --git a/board/total5200/sdram.c b/board/total5200/sdram.c
deleted file mode 100644
index dbe358773b..0000000000
--- a/board/total5200/sdram.c
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * (C) Copyright 2003-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@freescale.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc5xxx.h>
-
-#include "sdram.h"
-
-#ifndef CONFIG_SYS_RAMBOOT
-static void mpc5xxx_sdram_start (sdram_conf_t *sdram_conf, int hi_addr)
-{
-	long hi_addr_bit = hi_addr ? 0x01000000 : 0;
-
-	/* unlock mode register */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = sdram_conf->control | 0x80000000 | hi_addr_bit;
-	__asm__ volatile ("sync");
-
-	/* precharge all banks */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = sdram_conf->control | 0x80000002 | hi_addr_bit;
-	__asm__ volatile ("sync");
-
-	if (sdram_conf->ddr) {
-		/* set mode register: extended mode */
-		*(vu_long *)MPC5XXX_SDRAM_MODE = sdram_conf->emode;
-		__asm__ volatile ("sync");
-
-		/* set mode register: reset DLL */
-		*(vu_long *)MPC5XXX_SDRAM_MODE = sdram_conf->mode | 0x04000000;
-		__asm__ volatile ("sync");
-	}
-
-	/* precharge all banks */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = sdram_conf->control | 0x80000002 | hi_addr_bit;
-	__asm__ volatile ("sync");
-
-	/* auto refresh */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = sdram_conf->control | 0x80000004 | hi_addr_bit;
-	__asm__ volatile ("sync");
-
-	/* set mode register */
-	*(vu_long *)MPC5XXX_SDRAM_MODE = sdram_conf->mode;
-	__asm__ volatile ("sync");
-
-	/* normal operation */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = sdram_conf->control | hi_addr_bit;
-	__asm__ volatile ("sync");
-}
-#endif
-
-/*
- * ATTENTION: Although partially referenced initdram does NOT make real use
- *            use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
- *            is something else than 0x00000000.
- */
-
-long int mpc5xxx_sdram_init (sdram_conf_t *sdram_conf)
-{
-	ulong dramsize = 0;
-	ulong dramsize2 = 0;
-#ifndef CONFIG_SYS_RAMBOOT
-	ulong test1, test2;
-
-	/* setup SDRAM chip selects */
-	*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e;/* 2G at 0x0 */
-	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x80000000;/* disabled */
-	__asm__ volatile ("sync");
-
-	/* setup config registers */
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG1 = sdram_conf->config1;
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = sdram_conf->config2;
-	__asm__ volatile ("sync");
-
-	if (sdram_conf->ddr) {
-		/* set tap delay */
-		*(vu_long *)MPC5XXX_CDM_PORCFG = sdram_conf->tapdelay;
-		__asm__ volatile ("sync");
-	}
-
-	/* find RAM size using SDRAM CS0 only */
-	mpc5xxx_sdram_start(sdram_conf, 0);
-	test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
-	mpc5xxx_sdram_start(sdram_conf, 1);
-	test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
-	if (test1 > test2) {
-		mpc5xxx_sdram_start(sdram_conf, 0);
-		dramsize = test1;
-	} else {
-		dramsize = test2;
-	}
-
-	/* memory smaller than 1MB is impossible */
-	if (dramsize < (1 << 20)) {
-		dramsize = 0;
-	}
-
-	/* set SDRAM CS0 size according to the amount of RAM found */
-	if (dramsize > 0) {
-		*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 + __builtin_ffs(dramsize >> 20) - 1;
-	} else {
-		*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
-	}
-
-	/* let SDRAM CS1 start right after CS0 */
-	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;/* 2G */
-
-	/* find RAM size using SDRAM CS1 only */
-	mpc5xxx_sdram_start(sdram_conf, 0);
-	test1 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
-	mpc5xxx_sdram_start(sdram_conf, 1);
-	test2 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
-	if (test1 > test2) {
-		mpc5xxx_sdram_start(sdram_conf, 0);
-		dramsize2 = test1;
-	} else {
-		dramsize2 = test2;
-	}
-
-	/* memory smaller than 1MB is impossible */
-	if (dramsize2 < (1 << 20)) {
-		dramsize2 = 0;
-	}
-
-	/* set SDRAM CS1 size according to the amount of RAM found */
-	if (dramsize2 > 0) {
-		*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize
-			| (0x13 + __builtin_ffs(dramsize2 >> 20) - 1);
-	} else {
-		*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
-	}
-
-#else /* CONFIG_SYS_RAMBOOT */
-
-	/* retrieve size of memory connected to SDRAM CS0 */
-	dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
-	if (dramsize >= 0x13) {
-		dramsize = (1 << (dramsize - 0x13)) << 20;
-	} else {
-		dramsize = 0;
-	}
-
-	/* retrieve size of memory connected to SDRAM CS1 */
-	dramsize2 = *(vu_long *)MPC5XXX_SDRAM_CS1CFG & 0xFF;
-	if (dramsize2 >= 0x13) {
-		dramsize2 = (1 << (dramsize2 - 0x13)) << 20;
-	} else {
-		dramsize2 = 0;
-	}
-
-#endif /* CONFIG_SYS_RAMBOOT */
-
-	return dramsize + dramsize2;
-}
diff --git a/board/total5200/sdram.h b/board/total5200/sdram.h
deleted file mode 100644
index 3758f5c986..0000000000
--- a/board/total5200/sdram.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@freescale.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-typedef struct {
-	ulong ddr;
-	ulong mode;
-	ulong emode;
-	ulong control;
-	ulong config1;
-	ulong config2;
-	ulong tapdelay;
-} sdram_conf_t;
-
-long int mpc5xxx_sdram_init (sdram_conf_t *sdram_conf);
diff --git a/board/total5200/total5200.c b/board/total5200/total5200.c
deleted file mode 100644
index 345a186b2e..0000000000
--- a/board/total5200/total5200.c
+++ /dev/null
@@ -1,276 +0,0 @@
-/*
- * (C) Copyright 2003-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@freescale.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc5xxx.h>
-#include <pci.h>
-#include <netdev.h>
-
-#include "sdram.h"
-
-#if CONFIG_TOTAL5200_REV==2
-#include "mt48lc32m16a2-75.h"
-#else
-#include "mt48lc16m16a2-75.h"
-#endif
-
-phys_size_t initdram (int board_type)
-{
-	sdram_conf_t sdram_conf;
-
-	sdram_conf.ddr = SDRAM_DDR;
-	sdram_conf.mode = SDRAM_MODE;
-	sdram_conf.emode = 0;
-	sdram_conf.control = SDRAM_CONTROL;
-	sdram_conf.config1 = SDRAM_CONFIG1;
-	sdram_conf.config2 = SDRAM_CONFIG2;
-	sdram_conf.tapdelay = 0;
-	return mpc5xxx_sdram_init (&sdram_conf);
-}
-
-int checkboard (void)
-{
-#if CONFIG_TOTAL5200_REV==2
-	puts ("Board: Total5200 Rev.2 ");
-#else
-	puts ("Board: Total5200 ");
-#endif
-
-	/*
-	 * Retrieve FPGA Revision.
-	 */
-	printf ("(FPGA %08lX)\n", *(vu_long *) (CONFIG_SYS_FPGA_BASE + 0x400));
-
-	/*
-	 * Take all peripherals in power-up mode.
-	 */
-#if CONFIG_TOTAL5200_REV==2
-	*(vu_char *) (CONFIG_SYS_CPLD_BASE + 0x46) = 0x70;
-#else
-	*(vu_long *) (CONFIG_SYS_CPLD_BASE + 0x400) = 0x70;
-#endif
-
-	return 0;
-}
-
-#ifdef	CONFIG_PCI
-static struct pci_controller hose;
-
-extern void pci_mpc5xxx_init(struct pci_controller *);
-
-void pci_init_board(void)
-{
-	pci_mpc5xxx_init(&hose);
-}
-#endif
-
-#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET)
-
-/* IRDA_1 aka PSC6_3 (pin C13) */
-#define GPIO_IRDA_1	0x20000000UL
-
-void init_ide_reset (void)
-{
-	debug ("init_ide_reset\n");
-
-	/* Configure IRDA_1 (PSC6_3) as GPIO output for ATA reset */
-	*(vu_long *) MPC5XXX_GPIO_ENABLE |= GPIO_IRDA_1;
-	*(vu_long *) MPC5XXX_GPIO_DIR    |= GPIO_IRDA_1;
-}
-
-void ide_set_reset (int idereset)
-{
-	debug ("ide_reset(%d)\n", idereset);
-
-	if (idereset) {
-		*(vu_long *) MPC5XXX_GPIO_DATA_O &= ~GPIO_IRDA_1;
-	} else {
-		*(vu_long *) MPC5XXX_GPIO_DATA_O |=  GPIO_IRDA_1;
-	}
-}
-#endif
-
-#ifdef CONFIG_VIDEO_SED13806
-#include <sed13806.h>
-
-#define DISPLAY_WIDTH   640
-#define DISPLAY_HEIGHT  480
-
-#ifdef CONFIG_VIDEO_SED13806_8BPP
-#error CONFIG_VIDEO_SED13806_8BPP not supported.
-#endif /* CONFIG_VIDEO_SED13806_8BPP */
-
-#ifdef CONFIG_VIDEO_SED13806_16BPP
-static const S1D_REGS init_regs [] =
-{
-    {0x0001,0x00},   /* Miscellaneous Register */
-    {0x01FC,0x00},   /* Display Mode Register */
-    {0x0004,0x00},   /* General IO Pins Configuration Register 0 */
-    {0x0005,0x00},   /* General IO Pins Configuration Register 1 */
-    {0x0008,0x00},   /* General IO Pins Control Register 0 */
-    {0x0009,0x00},   /* General IO Pins Control Register 1 */
-    {0x0010,0x02},   /* Memory Clock Configuration Register */
-    {0x0014,0x02},   /* LCD Pixel Clock Configuration Register */
-    {0x0018,0x02},   /* CRT/TV Pixel Clock Configuration Register */
-    {0x001C,0x02},   /* MediaPlug Clock Configuration Register */
-    {0x001E,0x01},   /* CPU To Memory Wait State Select Register */
-    {0x0021,0x03},   /* DRAM Refresh Rate Register */
-    {0x002A,0x00},   /* DRAM Timings Control Register 0 */
-    {0x002B,0x01},   /* DRAM Timings Control Register 1 */
-    {0x0020,0x80},   /* Memory Configuration Register */
-    {0x0030,0x25},   /* Panel Type Register */
-    {0x0031,0x00},   /* MOD Rate Register */
-    {0x0032,0x4F},   /* LCD Horizontal Display Width Register */
-    {0x0034,0x13},   /* LCD Horizontal Non-Display Period Register */
-    {0x0035,0x01},   /* TFT FPLINE Start Position Register */
-    {0x0036,0x0B},   /* TFT FPLINE Pulse Width Register */
-    {0x0038,0xDF},   /* LCD Vertical Display Height Register 0 */
-    {0x0039,0x01},   /* LCD Vertical Display Height Register 1 */
-    {0x003A,0x2C},   /* LCD Vertical Non-Display Period Register */
-    {0x003B,0x0A},   /* TFT FPFRAME Start Position Register */
-    {0x003C,0x01},   /* TFT FPFRAME Pulse Width Register */
-    {0x0040,0x05},   /* LCD Display Mode Register */
-    {0x0041,0x00},   /* LCD Miscellaneous Register */
-    {0x0042,0x00},   /* LCD Display Start Address Register 0 */
-    {0x0043,0x00},   /* LCD Display Start Address Register 1 */
-    {0x0044,0x00},   /* LCD Display Start Address Register 2 */
-    {0x0046,0x80},   /* LCD Memory Address Offset Register 0 */
-    {0x0047,0x02},   /* LCD Memory Address Offset Register 1 */
-    {0x0048,0x00},   /* LCD Pixel Panning Register */
-    {0x004A,0x00},   /* LCD Display FIFO High Threshold Control Register */
-    {0x004B,0x00},   /* LCD Display FIFO Low Threshold Control Register */
-    {0x0050,0x4F},   /* CRT/TV Horizontal Display Width Register */
-    {0x0052,0x13},   /* CRT/TV Horizontal Non-Display Period Register */
-    {0x0053,0x01},   /* CRT/TV HRTC Start Position Register */
-    {0x0054,0x0B},   /* CRT/TV HRTC Pulse Width Register */
-    {0x0056,0xDF},   /* CRT/TV Vertical Display Height Register 0 */
-    {0x0057,0x01},   /* CRT/TV Vertical Display Height Register 1 */
-    {0x0058,0x2B},   /* CRT/TV Vertical Non-Display Period Register */
-    {0x0059,0x09},   /* CRT/TV VRTC Start Position Register */
-    {0x005A,0x01},   /* CRT/TV VRTC Pulse Width Register */
-    {0x005B,0x10},   /* TV Output Control Register */
-    {0x0060,0x05},   /* CRT/TV Display Mode Register */
-    {0x0062,0x00},   /* CRT/TV Display Start Address Register 0 */
-    {0x0063,0x00},   /* CRT/TV Display Start Address Register 1 */
-    {0x0064,0x00},   /* CRT/TV Display Start Address Register 2 */
-    {0x0066,0x80},   /* CRT/TV Memory Address Offset Register 0 */
-    {0x0067,0x02},   /* CRT/TV Memory Address Offset Register 1 */
-    {0x0068,0x00},   /* CRT/TV Pixel Panning Register */
-    {0x006A,0x00},   /* CRT/TV Display FIFO High Threshold Control Register */
-    {0x006B,0x00},   /* CRT/TV Display FIFO Low Threshold Control Register */
-    {0x0070,0x00},   /* LCD Ink/Cursor Control Register */
-    {0x0071,0x01},   /* LCD Ink/Cursor Start Address Register */
-    {0x0072,0x00},   /* LCD Cursor X Position Register 0 */
-    {0x0073,0x00},   /* LCD Cursor X Position Register 1 */
-    {0x0074,0x00},   /* LCD Cursor Y Position Register 0 */
-    {0x0075,0x00},   /* LCD Cursor Y Position Register 1 */
-    {0x0076,0x00},   /* LCD Ink/Cursor Blue Color 0 Register */
-    {0x0077,0x00},   /* LCD Ink/Cursor Green Color 0 Register */
-    {0x0078,0x00},   /* LCD Ink/Cursor Red Color 0 Register */
-    {0x007A,0x1F},   /* LCD Ink/Cursor Blue Color 1 Register */
-    {0x007B,0x3F},   /* LCD Ink/Cursor Green Color 1 Register */
-    {0x007C,0x1F},   /* LCD Ink/Cursor Red Color 1 Register */
-    {0x007E,0x00},   /* LCD Ink/Cursor FIFO Threshold Register */
-    {0x0080,0x00},   /* CRT/TV Ink/Cursor Control Register */
-    {0x0081,0x01},   /* CRT/TV Ink/Cursor Start Address Register */
-    {0x0082,0x00},   /* CRT/TV Cursor X Position Register 0 */
-    {0x0083,0x00},   /* CRT/TV Cursor X Position Register 1 */
-    {0x0084,0x00},   /* CRT/TV Cursor Y Position Register 0 */
-    {0x0085,0x00},   /* CRT/TV Cursor Y Position Register 1 */
-    {0x0086,0x00},   /* CRT/TV Ink/Cursor Blue Color 0 Register */
-    {0x0087,0x00},   /* CRT/TV Ink/Cursor Green Color 0 Register */
-    {0x0088,0x00},   /* CRT/TV Ink/Cursor Red Color 0 Register */
-    {0x008A,0x1F},   /* CRT/TV Ink/Cursor Blue Color 1 Register */
-    {0x008B,0x3F},   /* CRT/TV Ink/Cursor Green Color 1 Register */
-    {0x008C,0x1F},   /* CRT/TV Ink/Cursor Red Color 1 Register */
-    {0x008E,0x00},   /* CRT/TV Ink/Cursor FIFO Threshold Register */
-    {0x0100,0x00},   /* BitBlt Control Register 0 */
-    {0x0101,0x00},   /* BitBlt Control Register 1 */
-    {0x0102,0x00},   /* BitBlt ROP Code/Color Expansion Register */
-    {0x0103,0x00},   /* BitBlt Operation Register */
-    {0x0104,0x00},   /* BitBlt Source Start Address Register 0 */
-    {0x0105,0x00},   /* BitBlt Source Start Address Register 1 */
-    {0x0106,0x00},   /* BitBlt Source Start Address Register 2 */
-    {0x0108,0x00},   /* BitBlt Destination Start Address Register 0 */
-    {0x0109,0x00},   /* BitBlt Destination Start Address Register 1 */
-    {0x010A,0x00},   /* BitBlt Destination Start Address Register 2 */
-    {0x010C,0x00},   /* BitBlt Memory Address Offset Register 0 */
-    {0x010D,0x00},   /* BitBlt Memory Address Offset Register 1 */
-    {0x0110,0x00},   /* BitBlt Width Register 0 */
-    {0x0111,0x00},   /* BitBlt Width Register 1 */
-    {0x0112,0x00},   /* BitBlt Height Register 0 */
-    {0x0113,0x00},   /* BitBlt Height Register 1 */
-    {0x0114,0x00},   /* BitBlt Background Color Register 0 */
-    {0x0115,0x00},   /* BitBlt Background Color Register 1 */
-    {0x0118,0x00},   /* BitBlt Foreground Color Register 0 */
-    {0x0119,0x00},   /* BitBlt Foreground Color Register 1 */
-    {0x01E0,0x00},   /* Look-Up Table Mode Register */
-    {0x01E2,0x00},   /* Look-Up Table Address Register */
-    {0x01E4,0x00},   /* Look-Up Table Data Register */
-    {0x01F0,0x00},   /* Power Save Configuration Register */
-    {0x01F1,0x00},   /* Power Save Status Register */
-    {0x01F4,0x00},   /* CPU-to-Memory Access Watchdog Timer Register */
-    {0x01FC,0x01},   /* Display Mode Register */
-    {0, 0}
-};
-#endif /* CONFIG_VIDEO_SED13806_16BPP */
-
-#ifdef CONFIG_CONSOLE_EXTRA_INFO
-/* Return text to be printed besides the logo. */
-void video_get_info_str (int line_number, char *info)
-{
-	if (line_number == 1) {
-#if CONFIG_TOTAL5200_REV==1
-		strcpy (info, " Total5200");
-#elif CONFIG_TOTAL5200_REV==2
-		strcpy (info, " Total5200 Rev.2");
-#else
-#error CONFIG_TOTAL5200_REV must be 1 or 2.
-#endif
-	} else {
-		info [0] = '\0';
-	}
-}
-#endif
-
-/* Returns  SED13806 base address. First thing called in the driver. */
-unsigned int board_video_init (void)
-{
-	return CONFIG_SYS_LCD_BASE;
-}
-
-/* Called after initializing the SED13806 and before clearing the screen. */
-void board_validate_screen (unsigned int base)
-{
-}
-
-/* Return a pointer to the initialization sequence. */
-const S1D_REGS *board_get_regs (void)
-{
-	return init_regs;
-}
-
-int board_get_width (void)
-{
-	return DISPLAY_WIDTH;
-}
-
-int board_get_height (void)
-{
-	return DISPLAY_HEIGHT;
-}
-
-#endif /* CONFIG_VIDEO_SED13806 */
-
-int board_eth_init(bd_t *bis)
-{
-	cpu_eth_init(bis); /* Built in FEC comes first */
-	return pci_eth_init(bis);
-}
diff --git a/board/woodburn/woodburn.c b/board/woodburn/woodburn.c
index 2744514435..3da61a4c3d 100644
--- a/board/woodburn/woodburn.c
+++ b/board/woodburn/woodburn.c
@@ -137,9 +137,6 @@ void board_init_f(ulong dummy)
 	/* Clear the BSS. */
 	memset(__bss_start, 0, __bss_end - __bss_start);
 
-	/* Set global data pointer. */
-	gd = &gdata;
-
 	preloader_console_init();
 	timer_init();
 
diff --git a/board/xilinx/microblaze-generic/microblaze-generic.c b/board/xilinx/microblaze-generic/microblaze-generic.c
index 42a8d0c400..3110405a1b 100644
--- a/board/xilinx/microblaze-generic/microblaze-generic.c
+++ b/board/xilinx/microblaze-generic/microblaze-generic.c
@@ -11,16 +11,62 @@
 
 #include <common.h>
 #include <config.h>
+#include <fdtdec.h>
 #include <netdev.h>
 #include <asm/processor.h>
 #include <asm/microblaze_intc.h>
 #include <asm/asm.h>
 #include <asm/gpio.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #ifdef CONFIG_XILINX_GPIO
 static int reset_pin = -1;
 #endif
 
+#ifdef CONFIG_OF_CONTROL
+ulong ram_base;
+
+void dram_init_banksize(void)
+{
+	gd->bd->bi_dram[0].start = ram_base;
+	gd->bd->bi_dram[0].size = get_effective_memsize();
+}
+
+int dram_init(void)
+{
+	int node;
+	fdt_addr_t addr;
+	fdt_size_t size;
+	const void *blob = gd->fdt_blob;
+
+	node = fdt_node_offset_by_prop_value(blob, -1, "device_type",
+					     "memory", 7);
+	if (node == -FDT_ERR_NOTFOUND) {
+		debug("DRAM: Can't get memory node\n");
+		return 1;
+	}
+	addr = fdtdec_get_addr_size(blob, node, "reg", &size);
+	if (addr == FDT_ADDR_T_NONE || size == 0) {
+		debug("DRAM: Can't get base address or size\n");
+		return 1;
+	}
+	ram_base = addr;
+
+	gd->ram_top = addr; /* In setup_dest_addr() is done +ram_size */
+	gd->ram_size = size;
+
+	return 0;
+};
+#else
+int dram_init(void)
+{
+	gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
+
+	return 0;
+}
+#endif
+
 int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 #ifdef CONFIG_XILINX_GPIO
diff --git a/board/xilinx/zynq/board.c b/board/xilinx/zynq/board.c
index 258632e52b..738c31c6ee 100644
--- a/board/xilinx/zynq/board.c
+++ b/board/xilinx/zynq/board.c
@@ -24,6 +24,7 @@ static xilinx_desc fpga010 = XILINX_XC7Z010_DESC(0x10);
 static xilinx_desc fpga015 = XILINX_XC7Z015_DESC(0x15);
 static xilinx_desc fpga020 = XILINX_XC7Z020_DESC(0x20);
 static xilinx_desc fpga030 = XILINX_XC7Z030_DESC(0x30);
+static xilinx_desc fpga035 = XILINX_XC7Z035_DESC(0x35);
 static xilinx_desc fpga045 = XILINX_XC7Z045_DESC(0x45);
 static xilinx_desc fpga100 = XILINX_XC7Z100_DESC(0x100);
 #endif
@@ -49,6 +50,9 @@ int board_init(void)
 	case XILINX_ZYNQ_7030:
 		fpga = fpga030;
 		break;
+	case XILINX_ZYNQ_7035:
+		fpga = fpga035;
+		break;
 	case XILINX_ZYNQ_7045:
 		fpga = fpga045;
 		break;
@@ -87,6 +91,14 @@ int board_late_init(void)
 	return 0;
 }
 
+#ifdef CONFIG_DISPLAY_BOARDINFO
+int checkboard(void)
+{
+	puts("Board:\tXilinx Zynq\n");
+	return 0;
+}
+#endif
+
 int board_eth_init(bd_t *bis)
 {
 	u32 ret = 0;
@@ -111,11 +123,13 @@ int board_eth_init(bd_t *bis)
 #if defined(CONFIG_ZYNQ_GEM)
 # if defined(CONFIG_ZYNQ_GEM0)
 	ret |= zynq_gem_initialize(bis, ZYNQ_GEM_BASEADDR0,
-						CONFIG_ZYNQ_GEM_PHY_ADDR0, 0);
+				   CONFIG_ZYNQ_GEM_PHY_ADDR0,
+				   CONFIG_ZYNQ_GEM_EMIO0);
 # endif
 # if defined(CONFIG_ZYNQ_GEM1)
 	ret |= zynq_gem_initialize(bis, ZYNQ_GEM_BASEADDR1,
-						CONFIG_ZYNQ_GEM_PHY_ADDR1, 0);
+				   CONFIG_ZYNQ_GEM_PHY_ADDR1,
+				   CONFIG_ZYNQ_GEM_EMIO1);
 # endif
 #endif
 	return ret;