powerpc/8xxx: Refactor SRIO initialization into common code

Moved the SRIO init out of corenet_ds and into common code for
8xxx/QorIQ processors that have SRIO.  We mimic what we do with PCIe
controllers for SRIO.

We utilize the fact that SRIO is over serdes to determine if its
configured or not and thus can setup the LAWs needed for it dynamically.

We additionally update the device tree (to remove the SRIO nodes) if the
board doesn't have SRIO enabled.

Introduced the following standard defines for board config.h:

CONFIG_SYS_SRIO - Chip has SRIO or not
CONFIG_SRIO1 - Board has SRIO 1 port available
CONFIG_SRIO2 - Board has SRIO 2 port available

(where 'n' is the port #)
CONFIG_SYS_SRIOn_MEM_VIRT - virtual address in u-boot
CONFIG_SYS_SRIOn_MEM_PHYS - physical address (for law setup)
CONFIG_SYS_SRIOn_MEM_SIZE - size of window (for law setup)

[ These mimic what we have for PCI and PCIe controllers ]

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Wolfgang Denk <wd@denx.de>

1 files changed, 0 insertions, 44 deletions

diff --git a/board/freescale/corenet_ds/corenet_ds.c b/board/freescale/corenet_ds/corenet_ds.c
index f183cf61d2..232dc7297a 100644
--- a/board/freescale/corenet_ds/corenet_ds.c
+++ b/board/freescale/corenet_ds/corenet_ds.c
@@ -157,34 +157,10 @@ static const char *serdes_clock_to_string(u32 clock)
 int misc_init_r(void)
 {
 	serdes_corenet_t *srds_regs = (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
-	__maybe_unused ccsr_gur_t *gur;
 	u32 actual[NUM_SRDS_BANKS];
 	unsigned int i;
 	u8 sw3;
 
-	gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-#ifdef CONFIG_SRIO1
-	if (is_serdes_configured(SRIO1)) {
-		set_next_law(CONFIG_SYS_RIO1_MEM_PHYS, LAW_SIZE_256M,
-				LAW_TRGT_IF_RIO_1);
-	} else {
-		printf ("    SRIO1: disabled\n");
-	}
-#else
-	setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_SRIO1); /* disable */
-#endif
-
-#ifdef CONFIG_SRIO2
-	if (is_serdes_configured(SRIO2)) {
-		set_next_law(CONFIG_SYS_RIO2_MEM_PHYS, LAW_SIZE_256M,
-				LAW_TRGT_IF_RIO_2);
-	} else {
-		printf ("    SRIO2: disabled\n");
-	}
-#else
-	setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_SRIO2); /* disable */
-#endif
-
 	/* Warn if the expected SERDES reference clocks don't match the
 	 * actual reference clocks.  This needs to be done after calling
 	 * p4080_erratum_serdes8(), since that function may modify the clocks.
@@ -217,24 +193,6 @@ void board_lmb_reserve(struct lmb *lmb)
 }
 #endif
 
-void ft_srio_setup(void *blob)
-{
-#ifdef CONFIG_SRIO1
-	if (!is_serdes_configured(SRIO1)) {
-		fdt_del_node_and_alias(blob, "rio0");
-	}
-#else
-	fdt_del_node_and_alias(blob, "rio0");
-#endif
-#ifdef CONFIG_SRIO2
-	if (!is_serdes_configured(SRIO2)) {
-		fdt_del_node_and_alias(blob, "rio1");
-	}
-#else
-	fdt_del_node_and_alias(blob, "rio1");
-#endif
-}
-
 void ft_board_setup(void *blob, bd_t *bd)
 {
 	phys_addr_t base;
@@ -242,8 +200,6 @@ void ft_board_setup(void *blob, bd_t *bd)
 
 	ft_cpu_setup(blob, bd);
 
-	ft_srio_setup(blob);
-
 	base = getenv_bootm_low();
 	size = getenv_bootm_size();